CPUArchState is no longer needed, and it thereby no longer depends on
NEED_CPU_H.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Note that target-alpha accesses this field from TCG, now using a
negative offset. Therefore the field is placed last in CPUState.

Pass PowerPCCPU to [kvm]ppc_fixup_cpu() to facilitate this change.

Move common parts of mips cpu_state_reset() to mips_cpu_reset().

Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
[AF: Rebased onto ppc CPU subclasses and openpic changes]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NAndreas Färber <afaerber@suse.de>

To facilitate the field movements, pass MIPSCPU to malta_mips_config();
avoid that for mips_cpu_map_tc() since callers only access MIPS Thread
Contexts, inside TCG helpers.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NAndreas Färber <afaerber@suse.de>

CPUArchState is no longer needed.

Move the declaration to include/qemu/cpu.h and add documentation.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

For target-mips also change the return type to bool.

Make include paths for cpu-qom.h consistent for alpha and unicore32.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
[AF: Updated new target-openrisc function accordingly]
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)

CPUArchState is no longer needed there.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

CPUArchState is no longer needed there.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NAndreas Färber <afaerber@suse.de>

CPUArchState is no longer needed there.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

CPUArchState is no longer needed.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

CPUArchState is no longer needed except for iterating the CPUs.

Needed for qemu_tcg_init_vcpu().

KVM and dummy threads still need CPUArchState for cpu_single_env.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NAndreas Färber <afaerber@suse.de>

CPUArchState is no longer needed there.

Also change its return type to bool.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

CPUArchState is no longer needed there.

Also change the return type to bool.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Change its type to bool.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Change its type to bool.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Change its type to bool.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

CPUArchState is no longer needed there.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

Change return type to bool, move to include/qemu/cpu.h and
add documentation.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
[AF: Updated new caller qemu_in_vcpu_thread()]

Old code used !io_thread to know if a thread was an vcpu or not.  That
fails when we introduce the iothread.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Move the DUMP_FPU and DUMP_CCOP flags for cpu_dump_state() from being
x86-specific flags to being generic ones. This allows us to drop some
TARGET_I386 ifdefs in various places, and means that we can (potentially)
be more consistent across architectures about which monitor commands or
debug abort printouts include FPU register contents and info about
QEMU's condition-code optimisations.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Contrary to its name, 'qemu_global_mutex' is only used locally
in cpus.c.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@gmail.com>

Since the only user of the extended cpu_list_id() format
was the x86 ?model/?dump/?cpuid output, we can drop it
completely.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

On x86 userspace delivers interrupts to the kernel asynchronously
(and therefore VCPU idle management is done in the kernel) if and
only if there is an in-kernel irqchip. On other architectures this
isn't necessarily true (they may always send interrupts
asynchronously), so define a new kvm_async_interrupts_enabled()
function instead of misusing kvm_irqchip_in_kernel().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The -numa option to qemu is used to create [fake] numa nodes
and expose them to the guest OS instance.

There are a couple of issues with the -numa option:

a) Max VCPU's that can be specified for a guest while using
   the qemu's -numa option is 64. Due to a typecasting issue
   when the number of VCPUs is > 32 the VCPUs don't show up
   under the specified [fake] numa nodes.

b) KVM currently has support for 160VCPUs per guest. The
   qemu's -numa option has only support for upto 64VCPUs
   per guest.
This patch addresses these two issues.

Below are examples of (a) and (b)

a) >32 VCPUs are specified with the -numa option:

/usr/local/bin/qemu-system-x86_64 \
-enable-kvm \
71:01:01 \
-net tap,ifname=tap0,script=no,downscript=no \
-vnc :4

...
Upstream qemu :
--------------

QEMU 1.1.50 monitor - type 'help' for more information
(qemu) info numa
6 nodes
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 32 33 34 35 36 37 38 39 40 41
node 0 size: 131072 MB
node 1 cpus: 10 11 12 13 14 15 16 17 18 19 42 43 44 45 46 47 48 49 50 51
node 1 size: 131072 MB
node 2 cpus: 20 21 22 23 24 25 26 27 28 29 52 53 54 55 56 57 58 59
node 2 size: 131072 MB
node 3 cpus: 30
node 3 size: 131072 MB
node 4 cpus:
node 4 size: 131072 MB
node 5 cpus: 31
node 5 size: 131072 MB

With the patch applied :
-----------------------

QEMU 1.1.50 monitor - type 'help' for more information
(qemu) info numa
6 nodes
node 0 cpus: 0 1 2 3 4 5 6 7 8 9
node 0 size: 131072 MB
node 1 cpus: 10 11 12 13 14 15 16 17 18 19
node 1 size: 131072 MB
node 2 cpus: 20 21 22 23 24 25 26 27 28 29
node 2 size: 131072 MB
node 3 cpus: 30 31 32 33 34 35 36 37 38 39
node 3 size: 131072 MB
node 4 cpus: 40 41 42 43 44 45 46 47 48 49
node 4 size: 131072 MB
node 5 cpus: 50 51 52 53 54 55 56 57 58 59
node 5 size: 131072 MB

b) >64 VCPUs specified with -numa option:

/usr/local/bin/qemu-system-x86_64 \
-enable-kvm \
-cpu Westmere,+rdtscp,+pdpe1gb,+dca,+pdcm,+xtpr,+tm2,+est,+smx,+vmx,+ds_cpl,+monitor,+dtes64,+pclmuldq,+pbe,+tm,+ht,+ss,+acpi,+d-vnc :4

...

Upstream qemu :
--------------

only 63 CPUs in NUMA mode supported.
only 64 CPUs in NUMA mode supported.
QEMU 1.1.50 monitor - type 'help' for more information
(qemu) info numa
8 nodes
node 0 cpus: 6 7 8 9 38 39 40 41 70 71 72 73
node 0 size: 65536 MB
node 1 cpus: 10 11 12 13 14 15 16 17 18 19 42 43 44 45 46 47 48 49 50 51 74 75 76 77 78 79
node 1 size: 65536 MB
node 2 cpus: 20 21 22 23 24 25 26 27 28 29 52 53 54 55 56 57 58 59 60 61
node 2 size: 65536 MB
node 3 cpus: 30 62
node 3 size: 65536 MB
node 4 cpus:
node 4 size: 65536 MB
node 5 cpus:
node 5 size: 65536 MB
node 6 cpus: 31 63
node 6 size: 65536 MB
node 7 cpus: 0 1 2 3 4 5 32 33 34 35 36 37 64 65 66 67 68 69
node 7 size: 65536 MB

With the patch applied :
-----------------------

QEMU 1.1.50 monitor - type 'help' for more information
(qemu) info numa
8 nodes
node 0 cpus: 0 1 2 3 4 5 6 7 8 9
node 0 size: 65536 MB
node 1 cpus: 10 11 12 13 14 15 16 17 18 19
node 1 size: 65536 MB
node 2 cpus: 20 21 22 23 24 25 26 27 28 29
node 2 size: 65536 MB
node 3 cpus: 30 31 32 33 34 35 36 37 38 39
node 3 size: 65536 MB
node 4 cpus: 40 41 42 43 44 45 46 47 48 49
node 4 size: 65536 MB
node 5 cpus: 50 51 52 53 54 55 56 57 58 59
node 5 size: 65536 MB
node 6 cpus: 60 61 62 63 64 65 66 67 68 69
node 6 size: 65536 MB
node 7 cpus: 70 71 72 73 74 75 76 77 78 79
Signed-off-by: NChegu Vinod &lt;chegu_vinod@hp.com&gt;, Jim Hull &lt;jim.hull@hp.com&gt;, Craig Hada <craig.hada@hp.com>
Tested-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Change field type to bool.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NAndreas Färber <afaerber@suse.de>

CPU_COMMON_THREAD was only used for Windows, adding an hThread field
to CPU_COMMON.

Move the field into QOM CPUState and change its type to HANDLE,
which it is assigned from. This requires Windows headers, pulled in
through qemu-thread.h.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Commit 946fb27c moved all the uses of all_cpu_threads_idle()
into cpus.c. This means we can mark the function 'static'
(again), if we shuffle it a bit earlier in the source file.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

This is now implied by kvm_irqchip_in_kernel.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch combines qtest and -icount together to turn the vm_clock
into a source that can be fully managed by the client.  To this end new
commands clock_step and clock_set are added.  Hooking them with libqtest
is left as an exercise to the reader.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The idea behind qtest is pretty simple.  Instead of executing a CPU via TCG or
KVM, rely on an external process to send events to the device model that the CPU
would normally generate.

qtest presents itself as an accelerator.  In addition, a new option is added to
establish a qtest server (-qtest) that takes a character device.  This is what
allows the external process to send CPU events to the device model.

qtest uses a simple line based protocol to send the events.  Documentation of
that protocol is in qtest.c.

I considered reusing the monitor for this job.  Adding interrupts would be a bit
difficult.  In addition, logging would also be difficult.

qtest has extensive logging support.  All protocol commands are logged with
time stamps using a new command line option (-qtest-log).  Logging is important
since ultimately, this is a feature for debugging.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Scripted conversion:
  for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
    sed -i "s/CPUState/CPUArchState/g" $file
  done

All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

In order to perform critical manipulations on the VM state in the
context of a VCPU, specifically code patching, stopping and resuming of
all VCPUs may be necessary. resume_all_vcpus is already compatible, now
enable pause_all_vcpus for this use case by stopping the calling context
before starting to wait for the whole gang.

CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>