Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

Direct call to kvm_arch_get_registers() bypass logic in
cpu_synchronize_state()
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We can't move fifo back to an embeded array because it needs to be aligned
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This naming was used in kvm tree, and is easier to remember
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

vmsd alone is not enugh, because we can have several structs saved with the same description (vmsd).
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

ticks_per_sec is a constant.  There's no need to store it as a variable as it
never changes since our time is based on units.

Convert get_ticks_per_sec() to a static inline and move the constant into
qemu-timer.h.  Remove all references to QEMU_TIMER_BASE so that we consistently
use this interface.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

loadvm_state is called from: vl.c during startup, vmstart() is called after finishing loading.  The other caller do_loadvm() does the call after a vm_stop().  At both places where we can be saving state we are stoped a few lines before
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In previosu series I remove v2 support for RAM (that was the version that was
supported when SaveVM v3 appeared).  Now we can't load RAM for any image saved in SaveVM v2, we can as well remove SaveVM v2 entirely.

Note: That SaveVM RAM was at v2 when General SaveVM support went from v2 to v3 makes talking about versions confusing at least
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It don't work.  It fails in this check

        if (qemu_get_be32(f) != last_ram_offset)

With 512MB of ram, values were for me:

	v = 20c00000 last_ram_offset = 20840000

Last time that some code changed that was this one.

    commit 94a6b54f
    Implement dynamic guest ram allocation.
    (I.e. it has been broken since at least April)

Going back to the previous commit, ram load correctly, but vga screen gets
corrupted and ide don't load correctly.  At this point I decide that removing
support is the only viable thing.

The last user of the ram_compress_* were RAM_SAVE_FLAG_FULL flag, but
that flag was never ever been stored in an image. Mark the flag obsolete
and remove the functions.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Now that monitor stopped using focus we can make it internal
to the mux driver.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

make the mux driver send mux_in and mux_out events when switching
focus while hooking up more handlers.

stop using CharDriverState->focus in monitor.c, track state using
the mux events instead.  This also removes the implicit assumtion
that a muxed monitor allways has mux channel 0.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Lets put -chardev into use now.  With this patch applied chardev:name is
accepted as chardev specification everywhere, i.e. now you can:

	-chardev stdio,id=ttyS0
	-serial chardev:ttyS0

which does the same as '-serial stdio".

Muxing can be done this way:

	-chardev stdio,id=mux,mux=on
	-serial chardev:mux
	-monitor chardev:mux

You can mux more than two streams.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

While being at it: create a new inet_dgram_opts() function for udp setup,
so udp can handle IPv6 now.

new cmd line syntax:
    -chardev udp,id=name,host=remotehost,port=remoteport,\
	localaddr=bindaddr,localport=bindport
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

new cmd line syntax:  you can add mux=1 to any chardev to enable muxing,
then attach it multiple times, like this:

	-chardev pty,name=mux,mux=on
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

new cmd line syntax:
    -chardev vc,id=name
    -chardev vc,id=name,width=pixels,height=pixels
    -chardev vc,id=name,cols=chars,rows=chars
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

new cmd line syntax:
    -chardev tty,id=name,path=/dev/tty*
    -chardev parport,id=name,path=/dev/parport*
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>