* quintela/migration-anthony-v2:
  Maintain the number of dirty pages
  dirty bitmap: abstract its use
  Exit loop if we have been there too long
  Only calculate expected_time for stage 2
  Only TCG needs TLB handling
  No need to iterate if we already are over the limit
  Add tracepoints for savevm section start/end
  Add spent time for migration
  Add migration_end function
  Add debugging infrastructure
  Add save_block_hdr function
  Add MigrationParams structure
  Add missing check for host_from_stream_offset return value for RAM_SAVE_FLAG_PAGE

* kiszka/queues/slirp:
  slirp: Improve error reporting of inaccessible smb directories
  slirp: Ensure smbd and shared directory exist when enable smb
  slirp: add 'cmd:' target for guestfwd
  slirp: Enforce host-side user of smb share

Instead of guessing, print the error code returned by access.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

Users may pass the following parameters to qemu:
    $ qemu-kvm -net nic -net user,smb= ...
    $ qemu-kvm -net nic -net user,smb ...
    $ qemu-kvm -net nic -net user,smb=bad_directory ...

In these cases, qemu started successfully while samba server
failed to start. Users will confuse since samba server
failed silently without any indication of what it did wrong.

To avoid it, we check whether the shared directory exist and
if users have permission to access this directory when QEMU's
"built-in" SMB server is enabled.
Signed-off-by: NDunrong Huang <riegamaths@gmail.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

When using guestfwd=, Qemu only connects the virtual server's TCP port
to a single chardev. This is useless in most cases, as we usually want
to have more than a single connection from the guest to the outside world.

This patch adds a new cmd: target to guestfwd= that allows for execution
of a command on every TCP connection. This leverages the same code as
the -smb parameter, just that here the command is user defined.
Reported-by: NSascha Wilde <wilde@intevation.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

Windows 7 (and possibly other versions) cannot connect to the samba
share if the exported host directory is not world-readable. This can be
resolved by forcing the username used for access checks to the one
under which QEMU and smbd are running.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

* kwolf/for-anthony: (24 commits)
  block: Factor bdrv_read_unthrottled() out of guess_disk_lchs()
  qtest: Tidy up temporary files properly
  fdc: Drop broken code for user-defined floppy geometry
  fdc_test: introduce test_sense_interrupt
  fdc_test: update media_change test
  fdc: fix interrupt handling
  fdc: rewrite seek and DSKCHG bit handling
  block: introduce bdrv_swap, implement bdrv_append on top of it
  block: copy over job and dirty bitmap fields in bdrv_append
  raw: hook into blkdebug
  blkdebug: optionally tie errors to a specific sector
  blkdebug: store list of active rules
  blkdebug: pass getlength to underlying file
  blkdebug: tiny cleanup
  blkdebug: remove sync i/o events
  sheepdog: traverse pending_list from the first for each time
  sheepdog: split outstanding list into inflight and pending
  sheepdog: make sure we don't free aiocb before sending all requests
  sheepdog: use coroutine based socket functions in coroutine context
  sheepdog: restart I/O when socket becomes ready in do_co_req()
  ...

To prepare move of guess_disk_lchs() into hw/, where it poking
BlockDriverState member io_limits_enabled directly would be unclean.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Each test litters /tmp with several files: a pid file and two
sockets.  Tidy up.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

* kraxel/usb.55:
  usb-host: add trace events for iso xfers
  usb: fix interface initialization
  usb: split endpoint init and reset
  usb-redir: Correctly handle the usb_redir_babble usbredir status
  ehci: Kick async schedule on wakeup in the non companion case
  usb-ehci: Fix an assert whenever isoc transfers are used
  ehci: don't flush cache on doorbell rings.
  ehci: fix td writeback
  ehci: fix ehci_qh_do_overlay

* bonzini/scsi-next:
  scsi: Fix transfer length for READ POSITION commands.
  scsi: Add basic support for SCSI media changer commands.
  scsi: Ensure command and transfer lengths are set for all SCSI devices
  scsi: Fix LOAD_UNLOAD
  scsi: Fix data length == SCSI_SENSE_BUF_SIZE
  virtio-scsi: do not crash on adding buffers to the event queue
  megasas: LSI Megaraid SAS HBA emulation
  megasas: Add header file
  ISCSI: force use of sg for SMC and SSC devices
  ISCSI: Add SCSI passthrough via scsi-generic to libiscsi
  scsi-disk: implement READ DISC INFORMATION
  atapi: implement READ DISC INFORMATION
  scsi: add a qdev property for the disk's WWN
  scsi: simplify handling of the VPD page length field

* stefanha/trivial-patches:
  configure: Remove help for --disable-vnc-thread, --enable-vnc-thread
  cpu-common.h: Remove a pointless ifndef CONFIG_USER_ONLY
  cpu-common.h: Remove unnecessary guard on including targphys.h

bdrv_get_floppy_geometry_hint() fails to store through its parameter
drive when bs has a geometry hint.  Makes fd_revalidate() assign
random crap to drv->drive.

Has been broken that way for ages.  Harmless, because:

* The only way to set a geometry hint is -drive if=none,cyls=...
  Since commit c219331e, probably unintentional.

* The only use of drv->drive is as argument to another
  bdrv_get_floppy_geometry_hint().  Which doesn't use it, since the
  geometry hint is still there.

Drop the broken code, ignore -drive parameter cyls, heads and secs for
floppies even with if=none, just like before commit c219331e.  Matches
-help, which explains cyls, heads, secs as "hard disk physical
geometry".
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Calling sense interrupt status while there is no interrupt should
return invalid command (0x80).

Read command should always returns in st0 seek_end bit set to 1.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

After rewrite DSKCHG bit handling the test has to be updated. Now
is needed to seek to different track to clear DSKCHG bit.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

If you call the SENSE INTERRUPT STATUS command while there is no interrupt
waiting you get as result unknown command.

Fixed status0 register handling for read/write/format commands.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This bit is cleared on every successful seek to a different track (cylinder).
The seek is also called on revalidate or on read/write/format commands which
also clear the DSKCHG bit.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The new function can be made a bit nicer than bdrv_append.  It swaps the
whole contents, and then swaps back (using the usual t=a;a=b;b=t idiom)
the fields that need to stay on top.  Thus, it does not need explicit
bdrv_detach_dev, bdrv_iostatus_disable, etc.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

While these should not be in use at the time a transaction is started,
a command in the prepare phase of a transaction might have added them,
so they need to be brought over.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This makes blkdebug scripts more powerful, and independent of the
exact sequence of operations performed by streaming.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This prepares for the next patch, where some active rules may actually
not trigger depending on input to readv/writev.  Store the active rules
in a SIMPLEQ (so that it can be emptied easily with QSIMPLEQ_INIT), and
fetch the errno/once/immediately arguments from there.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This is required when using blkdebug with raw format.  Unlike qcow2/QED,
raw asks blkdebug for the length of the file, it doesn't get it from
a header.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

These are unused, except (by mistake more or less) in QED.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The pending list can be modified in other coroutine context
sd_co_rw_vector, so we need to traverse the list from the first again
after we send the pending request.
Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

outstanding_list_head is used for both pending and inflight requests.
This patch splits it and improves readability.
Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch increments the pending counter before sending requests, and
make sures that aiocb is not freed while sending them.
Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This removes blocking network I/Os in coroutine context.
Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Currently, no one reenters the yielded coroutine.  This fixes it.
Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This fixes warnings about dprintf format in debug mode.
Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

If the image is read-only then it's not possible to copy read data into
it.  Therefore copy-on-read is automatically disabled for read-only
images.

Up until now this behavior was silent, add a warning so the user knows
why copy-on-read is not working.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

When qcow2_alloc_clusters() error handling code was introduced in commit
5d757b56, the value of free_byte_offset
was clobbered in the error case.  This patch keeps free_byte_offset at 0
so we will try to allocate clusters again next time this function is
called.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The DEBUG_ALLOC qcow2.h macro enables additional consistency checks
throughout the code.  This makes it easier to spot corruptions that are
introduced during development.  Since consistency check is an expensive
operation the DEBUG_ALLOC macro is used to compile checks out in normal
builds and qcow2_check_refcounts() calls missed the addition of a new
function argument.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Replace iso transfer fprintf's with trace points.  Also rename existing
tracepoints so they all match usb_host_iso_*.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

zero is a valid interface number, so don't use it when resetting the
endpoints.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Create a new usb_ep_reset() function to reset endpoint state, without
re-initialiting the queues, so we don't unlink in-flight packets just
because usb-host has to re-parse the descriptor tables.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Commit 0f588df8, added code
to ehci_wakeup to kick the async schedule on wakeup, but the else
was positioned wrong making it trigger for devices which are routed
to the companion rather then to the ehci controller itself.

This patch fixes this. Note that the "programming style" with using the
return at the end of the companion block matches how the companion case
is handled in the other ports ops, and is done this way for consistency.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

hcd-ehci.c is missing an usb_packet_init() call for the ipacket UsbPacket
it uses for isoc transfers, triggering an assert (taking the entire vm down)
in usb_packet_setup as soon as any isoc transfers are done by a high speed
USB device.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>