This patch fixes network hang after "stop" then "cont", while network
packets keep arriving.

Tested both manually (tap, host pinging guest) and with Jason's qtest
series (plus his "[PATCH 2.4] socket: pass correct size in
net_socket_send()" fix).

As virtio_net_set_status is called when guest driver is setting status
byte and when vm state is changing, it is a good opportunity to flush
queued packets.

This is necessary because during vm stop the backend (e.g. tap) would
stop rx processing after .can_receive returns false, until the queue is
explicitly flushed or purged.

The other interesting condition in .can_receive, virtio_queue_ready(),
is handled by virtio_net_handle_rx() when guest kicks; the 3rd condition
is invalid queue index which doesn't need flushing.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Commit 032a74a1
("virtio-net: byteswap virtio-net header") breaks any layout by
requiring out_sg[0].iov_len >= n->guest_hdr_len. Fixing this by
copying header to temporary buffer if swap is needed, and then use
this buffer as part of out_sg.

Fixes 032a74a1
("virtio-net: byteswap virtio-net header")
Cc: qemu-stable@nongnu.org
Cc: clg@fr.ibm.com
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

This reverts commit 830d70db.

The interface isn't fully backwards-compatible, which is bad.
Let's redo this properly after 2.4.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

By declaring another .subsections array for vmstate_tco_io_state made
vmstate_memhp_state not registered anymore. There must be only one
.subsections array for all subsections.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Reported-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NPaulo Alcantara <pcacjr@zytor.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NAmit Shah <amit.shah@redhat.com>

fix CID 1311372.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Message-Id: <1436489490-236-4-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

fix CID 1311373.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Message-Id: <1436489490-236-3-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch allow to limit number of heads using qxl driver. By default
qxl driver is not limited on any kind on head use so can decide to use
as much heads.

libvirt has this as a video card parameter (actually set to 1 but not
used). This parameter will allow to limit setting a use can do (which
could be confusing).
Signed-off-by: NFrediano Ziglio <fziglio@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The Linux kernel on aarch64 creates a page table entry at early bootup
that spans the 2MB range on memory spanning the fdt start address:

  [ ALIGN_DOWN(fdt, 2MB) ... ALIGN_DOWN(fdt, 2MB) + 2MB ]

This means that when our current 4k alignment happens to fall at the end
of the aligned region, Linux tries to access memory that is not mapped.

The easy fix is to instead increase the alignment to 2MB, making Linux's
logic always succeed.

We leave the existing 4k alignment for 32bit kernels to not cause any
regressions due to space constraints.
Reported-by: NAndreas Schwab <schwab@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

commit 213941d7 ("virtio-ccw: migrate ->revision") broke
migration:
2015-07-07T11:22:55.570968Z qemu-system-s390x: VQ 39 address 0x0 inconsistent with Host index 0x100
2015-07-07T11:22:55.571008Z qemu-system-s390x: error while loading state for instance 0x0 of

If thinint support is active, the config_load function returns early.
Make sure to load the revision all the time.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Fixes: 213941d7 ("virtio-ccw: migrate ->revision")
Message-Id: <1436269643-66303-1-git-send-email-borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

The diag288 watchdog is no sysbus device, therefore it doesn't get
triggered on resets automatically using dc->reset.

Let's register the reset handler manually, so we get correctly notified
again when a system reset was requested. Also reset the watchdog on
subsystem resets that don't trigger a full system reset.
Signed-off-by: NXu Wang <gesaint@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>

Implement support in Identify and Get/Set Features to properly report
and allow to change the Volatile Write Cache status reported by the
virtual NVMe device.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Implement a real flush instead of faking it.  This is especially important
as Qemu assume Write back cashing by default and thus requires a working
cache flush operation for data integrity.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

commit fddd179a,
    "pc: Convert *_MACHINE_OPTIONS macros into functions"
broke the chaining of *_machine_options() functions on
pc-i440fx-2.3, at:

  -#define PC_I440FX_2_3_MACHINE_OPTIONS \
  -    PC_I440FX_2_4_MACHINE_OPTIONS, \
  -    .alias = NULL, \
  -    .is_default = 0
  +static void pc_i440fx_2_3_machine_options(QEMUMachine *m)
  +{
  +    pc_i440fx_machine_options(m);
  +    m->alias = NULL;
  +    m->is_default = 0;
  +}

I have replaced PC_I440FX_2_4_MACHINE_OPTIONS with a
pc_i440fx_machine_options() call, instead of calling
pc_i440fx_2_4_machine_options(). This broke the setting of default_machine_opts
and default_display on pc-i440fx-{2.0,2,1,2.2,2.3}.

Fix this by making pc_i440fx_2_3_machine_options() reuse
pc_i440fx_2_4_machine_options().
Reported-by: N"Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>

This reverts commit df91055d.

This is because:
- vhost support virtio 1.0 now
- transport code (e.g virtio-pci) set this feature when modern is
  enabled, setting this unconditionally will break disable-modern=on.

Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Some guests seem to access cfg with an illegal length value.
It's worth fixing them but debugging is easier if
qemu does not crash.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

64 bit props used 32 bit callbacks in two places, leading to broken
feature bits on virtio (example: got 0x31000000000006d4 which is
obviously bogus). Fix this.

Fixes: fdba6d96 ("qdev: add 64bit properties")
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>

Use cpu_set_pc() for setting program counters when bootloading. This
removes an instance of system level code having to reach into the CPU
env.
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
[AF: Avoid duplicated CPU() casts through local variable]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Use cpu_set_pc() across the board for setting program counters. This
removes instances of system level code having to reach into the CPU
env.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
[AF: Avoid repeated casts with local variables]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The CD-ROM signature is 0xeb140101, not 0xeb140000.
Without this change OVMF/Duet runs into a timeout trying
to detect a SATA cdrom.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Message-id: 1436219392-31915-2-git-send-email-jsnow@redhat.com

address_space_rw assumes data is in target format
and byte-swaps it if target is BE and device is LE.
Use fixed-endian LE APIs instead.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

spec says we must, so let's do it!

Note: the implementation is incorrect for BE targets.
Will fix with a patch on top, not a big deal now as
the only user is seabios, used on x86 only.
Tested-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Some firmwares can test that and assume the device hasn't come
up if that bit isn't set
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Thanks to the last patch, pc_cmos_init() doesn't need the (optional)
board-default FDC any longer as an input parameter. Update
pc_basic_device_init() not to hand it back to pc_init1() / pc_q35_init(),
and update the latter not to carry the FDC to pc_cmos_init(). This
simplifies the code.

pc_init1() | pc_q35_init()
  pc_basic_device_init()
  pc_cmos_init()

Cc: Jan Tomko <jtomko@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

With the pc-q35-2.4 machine type, if the user creates an ISA FDC manually:

  -device isa-fdc,driveA=drive-fdc0-0-0 \
  -drive file=...,if=none,id=drive-fdc0-0-0,format=raw

then the board-default FDC will be skipped, and only the explicitly
requested FDC will exist. qtree-wise, this is correct; however such an FDC
is currently not registered in the CMOS, because that code is only reached
for the board-default FDC.

The pc_cmos_init_late() one-shot reset handler -- one-shot because the
CMOS is not reprogrammed during warm reset -- should search for any ISA
FDC devices, created implicitly (by board code) or explicitly, and set the
CMOS accordingly to the ISA FDC(s) with iobase=0x3f0:

- if there is no such FDC, report both drives absent,
- if there is exactly one such FDC, report its drives in the CMOS,
- if there are more than one such FDCs, then pick one (it is not specified
  which one), and print a warning about the ambiguity.

Cc: Jan Tomko <jtomko@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: NJan Tomko <jtomko@redhat.com>
Suggested-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Extract the pc_cmos_init_floppy() function from pc_cmos_init(). The
function sets two RTC registers: floppy drive types (0x10), overwriting
the earlier value in there), and REG_EQUIPMENT_BYTE (0x14), setting bits
in the prior value.

Cc: Jan Tomko <jtomko@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

If the signal is sampled high, this indicates that the system is
strapped to the "No Reboot" mode (ICH9 will disable the TCO Timer system
reboot feature). The status of this strap is readable via the NO_REBOOT
bit (CC: offset 0x3410:bit 5).

The NO_REBOOT bit is set when SPKR pin on ICH9 is sampled high. This bit
may be set or cleared by software if the strap is sampled low but may
not override the strap when it indicates "No Reboot".

This patch implements the logic where hardware has ability to set SPKR
pin through a property named "noreboot" and it's sampled high by
default.
Signed-off-by: NPaulo Alcantara <pcacjr@zytor.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The PCI device MSIx table is cleaned out in hardware after EEH PE
reset. However, we still hold the stale MSIx entries in QEMU, which
should be cleared accordingly. Otherwise, we will run into another
(recursive) EEH error and the PCI devices contained in the PE have
to be offlined exceptionally.

The patch introduces function spapr_phb_vfio_eeh_pre_reset(), which
is called by sPAPR when asserting hot or fundamental reset, to clear
stale MSIx table for VFIO PCI devices before EEH PE reset so that
MSIx table could be restored properly after EEH PE reset.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When rebooting the guest, some PEs might be in frozen state. The
contained PCI devices won't work properly if their frozen states
aren't cleared in time. One case running into this situation would
be maximal EEH error times encountered in the guest.

The patch reenables the EEH functinality on PEs on PHB's reset
callback, which will clear their frozen states if needed.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

There might have emulated PCI devices, together with VFIO PCI
devices under one PHB. The EEH capability shouldn't enabled
on emulated PCI devices.

The patch returns error when enabling EEH capability on emulated
PCI devices by RTAS call "ibm,set-eeh-option".
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

There's a call to object_dynamic_cast() in spapr_vty which uses the type
name "spapr-vty" directly, instead of the usual idiom of using the #defined
TYPE_VIO_SPAPR_VTY_DEVICE.  Fix it.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

If a guest passes the reg property of a valid VIO object that is not a VTY
to either H_GET_TERM_CHAR or H_PUT_TERM_CHAR, QEMU hits a dynamic cast
assertion and aborts.

PAPR+ says "Hypervisor checks the termno parameter for validity against the
Vterm IOA unit addresses assigned to the partition, else return H_Parameter."

This patch adds a type check to ensure vty_lookup() either returns a pointer
to a valid VTY object or NULL.  H_GET_TERM_CHAR and H_PUT_TERM_CHAR will
now return H_PARAMETER to the guest instead of crashing.

The patch has no effect on the reg == 0 hack used to implement the RTAS call
display-character.
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

* phb_index is not being used and if required can be obtained from sphb
* use helper to get drc_index in spapr_populate_pci_child_dt()
* Check if drc_index is zero
Suggested-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Each hardware instance has a platform unique location code.  The OF
device tree that describes a part of a hardware entity must include
the “ibm,loc-code” property with a value that represents the location
code for that hardware entity.

Populate ibm,loc-code.

1) PCI passthru devices need to identify with its own ibm,loc-code
   available on the host. In failure cases use:
   vfio_<name>:<phb-index>:<bus>:<slot>.<fn>

2) Emulated devices encode as following:
   qemu_<name>:<phb-index>:<bus>:<slot>.<fn>
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

All the PCI enumeration and device node creation was off-loaded to
SLOF. With PCI hotplug support, code needed to be added to add device
node. This creates multiple copy of the code one in SLOF and other in
hotplug code. To unify this, the patch adds the pci device node
creation in Qemu. For backward compatibility, a flag
"qemu,phb-enumerated" is added to the phb, suggesting to SLOF to not
do device node creation.
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[ Squashed Michael's drc_index changes ]
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When supporting CPU hot removal by parking the vCPU fd and reusing
it during hotplug again, there can be cases where we try to reenable
KVM_CAP_IRQ_XICS CAP for the vCPU for which it was already enabled.
Introduce a boolean member in ICPState to track this and don't
reenable the CAP if it was already enabled earlier.

Re-enabling this CAP should ideally work, but currently it results in
kernel trying to create and associate ICP with this vCPU and that
fails since there is already an ICP associated with it. Hence this
patch is needed to work around this problem in the kernel.

This change allows CPU hot removal to work for sPAPR.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Keep cpu_model field in MachineState uptodate so that it can be used
from the CPU hotplug path.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Factor out bits of sPAPR specific CPU initialization code into
a separate routine so that it can be called from CPU hotplug
path too.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Reorganize CPU device tree generation code so that it be reused from
hotplug path. CPU dt entries are now generated from spapr_finalize_fdt()
instead of spapr_create_fdt_skel().

Note: This is how the split-up looks like now:

Boot path
---------
spapr_finalize_fdt
 spapr_populate_cpus_dt_node
  spapr_populate_cpu_dt
   spapr_fixup_cpu_numa_dt
   spapr_fixup_cpu_smt_dt

ibm,cas path
------------
spapr_h_cas_compose_response
 spapr_fixup_cpu_dt
  spapr_fixup_cpu_numa_dt
  spapr_fixup_cpu_smt_dt
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Add support for ibm,lrdr-capacity since this is needed by the guest
kernel to know about the possible hot-pluggable CPUs and Memory. With
this, pseries kernels will start reporting correct maxcpus in
/sys/devices/system/cpu/possible.

Also define the minimum hotpluggable memory size as 256MB.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
[agraf: Fix compile error on 32bit hosts]
Signed-off-by: NAlexander Graf <agraf@suse.de>