Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

No functional change.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

target-arm queue:
 * more A64 Neon instructions
 * AArch32 VCVTB and VCVTT ARMv8 instructions
 * fixes to inaccuracies in GIC emulation
 * libvixl disassembler for A64
 * Allwinner SoC ethernet controller
 * zynq software system reset support

# gpg: Signature made Sat 08 Feb 2014 15:53:05 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20140208: (29 commits)
  arm/zynq: Add software system reset via SCLR
  hw/arm/allwinner-a10: initialize EMAC
  hw/net: add support for Allwinner EMAC Fast Ethernet controller
  util/fifo8: clear fifo head upon reset
  util/fifo8: implement push/pop of multiple bytes
  disas: Implement disassembly output for A64
  disas/libvixl: Fix upstream libvixl compilation issues
  disas: Add subset of libvixl sources for A64 disassembler
  rules.mak: Link with C++ if we have a C++ compiler
  rules.mak: Support .cc as a C++ source file suffix
  arm_gic: Add GICC_APRn state to the GICState
  vmstate: Add uint32 2D-array support
  arm_gic: Support setting/getting binary point reg
  arm_gic: Keep track of SGI sources
  arm_gic: Fix GIC pending behavior
  target-arm: Add support for AArch32 64bit VCVTB and VCVTT
  target-arm: A64: Add FNEG and FABS to the SIMD 2-reg-misc group
  target-arm: A64: Add 2-reg-misc REV* instructions
  target-arm: A64: Add narrowing 2-reg-misc instructions
  target-arm: A64: Implement 2-reg-misc CNT, NOT and RBIT
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/kvaneesh/for-upstream:
  hw/9pfs: fix P9_STATS_GEN handling
  hw/9pfs: make get_st_gen() return ENOTTY error on special files
  hw/9pfs: handle undefined FS_IOC_GETVERSION case in handle_ioc_getversion()
  hw/9pfs: fix error handing in local_ioc_getversion()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Commit 360e607b (address_space_translate: do not cross page boundaries,
2014-01-30) broke MMIO accesses in cases where the section is shorter
than the full register width.  This can happen for example with the
Bochs DISPI registers, which are 16 bits wide but have only a 1-byte
long MemoryRegion (if you write to the "second byte" of the register
your access is discarded; it doesn't write only to half of the register).

Restrict the action of commit 360e607b to direct RAM accesses.  This
is enough for Xen, since MMIO will not go through the mapcache.
Reported-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Tested-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-lm32: fixes

# gpg: Signature made Tue 04 Feb 2014 18:47:56 GMT using DSA key ID 3F98A378
# gpg: Can't check signature: public key not found

* remotes/mwalle/tags/lm32-fixes/20140204:
  hw/lm32: print error if cpu model is not found
  target-lm32: stop VM on illegal or unknown instruction
  lm32_sys: dump cpu state if test case fails
  lm32_sys: print test result on stderr
  target-lm32: add breakpoint/watchpoint support
  target-lm32: move model features to LM32CPU
  target-lm32: kill cpu_abort() calls
  milkymist-vgafb: swap pixel data in source buffer
  lm32_uart/lm32_juart: use qemu_chr_fe_write_all()
  milkymist-uart: use qemu_chr_fe_write_all() instead of qemu_chr_fe_write()
  tests: lm32: new rule for single test cases
  lm32_sys: increase test case name length limit
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Support software-driven system reset via the register in the SCLR.
Signed-off-by: NSebastian Huber <sebastian.huber@embedded-brains.de>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NBeniamino Galvani <b.galvani@gmail.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This patch adds support for the Fast Ethernet MAC found on Allwinner
SoCs, together with a basic emulation of Realtek RTL8201CP PHY.

Since there is no public documentation of the Allwinner controller, the
implementation is based on Linux kernel driver.
Signed-off-by: NBeniamino Galvani <b.galvani@gmail.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

To improve the predictability of fifo8_pop_buf(), the fifo head is set
to the start of data buffer upon a reset so that the first call to the
function will be able to retrieve all data in the fifo.
Signed-off-by: NBeniamino Galvani <b.galvani@gmail.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The patch adds functions fifo8_push_all() and fifo8_pop_buf() which
can be used respectively to push the content of a memory buffer to the
fifo and to pop multiple bytes obtaining a pointer to the fifo backing
buffer.

In addition, it implements fifo8_num_free() and fifo8_num_used() which
allow to check if a multi-byte operation can be performed.
Signed-off-by: NBeniamino Galvani <b.galvani@gmail.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use libvixl to implement disassembly output in debug
logs for A64, for use with both AArch64 hosts and targets.
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
[PMM:
 * added support for target disassembly
 * switched to custom QEMUDisassembler so the output format
   matches what QEMU expects
 * make sure we correctly fall back to "just print hex"
   if we didn't build the AArch64 disassembler because of
   lack of a C++ compiler
 * rename from 'aarch64' to 'arm-a64' because this is a
   disassembler for the A64 instruction set
 * merge aarch64.c and aarch64-cxx.cc into one C++ file
 * simplify the aarch64.c<->aarch64-cxx.cc interface]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix various minor issues with upstream libvixl so that it will compile
successfully on the platforms QEMU cares about:
 * remove unused GBytes constant (it clashes with the glib headers)
 * fix suffixes on constants to use 'LL' for 64 bit constants so
   we can compile on 32 bit hosts
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Add the subset of the libvixl sources that are needed for the
A64 disassembler support. These sources come from
https://github.com/armvixl/vixl commit 578645f14e122d2b
which is VIXL release 1.1.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

If we have a C++ compiler available, link with it, because we might be
linking some C++ files in. This allows us to include C++ object files
in the QEMU binary proper.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

The A64 disassembler libvixl uses .cc as its suffix for
C++ source files, so add support for it (we already support
.cpp).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

The GICC_APRn registers are not currently supported by the ARM GIC v2.0
emulation.  This patch adds the missing state.

Note that we also change the number of APRs to use a define GIC_NR_APRS
based on the maximum number of preemption levels.  This patch also adds
RAZ/WI accessors for the four registers on the emulated CPU interface.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add support for saving VMState of 2D arrays of uint32 values.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a binary_point field to the gic emulation structure and support
setting/getting this register now when we have it.  We don't actually
support interrupt grouping yet, oh well.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Right now the arm gic emulation doesn't keep track of the source of an
SGI (which apparently Linux guests don't use, or they're fine with
assuming CPU 0 always).

Add the necessary matrix on the GICState structure and maintain the data
when setting and clearing the pending state of an IRQ and make the state
visible to the guest.

Note that we always choose to present the source as the lowest-numbered
CPU in case multiple cores have signalled the same SGI number to a core
on the system.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The existing implementation of the pending behavior in gic_set_irq,
gic_complete_irq, and the distributor pending set/clear registers does
not follow the semantics of the GICv2.0 specs, but may implement the
11MPCore support.  Therefore, maintain the existing semantics for
11MPCore and v7M NVIC and change the behavior to be in accordance with
the GICv2.0 specs for "generic implementations" (s->revision == 1 ||
s->revision == 2).

Generic implementations distinguish between setting a level-triggered
interrupt pending through writes to the GICD_ISPENDR and when hardware
raises the interrupt line.  Writing to the GICD_ICPENDR will not cause
the interrupt to become non-pending if the line is still active, and
conversely, if the line is deactivated but the interrupt is marked as
pending through a write to GICD_ISPENDR, the interrupt remains pending.
Handle this situation in the GIC_TEST_PENDING (which now becomes a
static inline named gic_test_pending) and let the 'pending' field
correspond only to the latched state of the D-flip flop in the GICv2.0
specs Figure 4-10.

The following changes are added:

gic_test_pending:
Make this a static inline and split out the 11MPCore from the generic
behavior.  For the generic behavior, consider interrupts pending if:
    ((s->irq_state[irq].pending & (cm) != 0) ||
       (!GIC_TEST_EDGE_TRIGGER(irq) && GIC_TEST_LEVEL(irq, cm))

gic_set_irq:
Split out the 11MPCore from the generic behavior.  For the generic
behavior, always GIC_SET_LEVEL() on positive level, but only
GIC_SET_PENDING for edge-triggered interrupts and always simply
GIC_CLEAR_LEVEL() on negative level.

gic_complete_irq:
Only resample the line for line-triggered interrupts on an 11MPCore.
Generic implementations will sample the line directly in
gic_test_pending().
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add support for the AArch32 floating-point half-precision to double-
precision conversion VCVTB and VCVTT instructions.
Signed-off-by: NWill Newton <will.newton@linaro.org>
[PMM: fixed a minor missing-braces style issue]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add the SIMD FNEG and FABS instructions in the SIMD 2-reg-misc group.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Add the byte-reverse operations REV64, REV32 and REV16 from the
two-reg-misc group.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Add the narrowing integer instructions in the 2-reg-misc class.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Implement the 2-reg-misc CNT, NOT and RBIT instructions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Implement the simple 2-register-misc operations we can share
with the scalar-two-register-misc code. (SUQADD, USQADD, SQABS,
SQNEG also fall into this category, but aren't implemented in
the scalar-2-register case yet either.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Add a skeleton decode for the SIMD 2-reg misc group.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Implement the simple 64 bit integer operations from the SIMD
scalar 2-register misc group (C3.6.12): the comparisons against
zero, plus ABS and NEG.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Implement the remaining integer instructions in the scalar-three-reg-same
group: SQADD, UQADD, SQSUB, UQSUB, SQSHL, UQSHL, SQRSHL, UQRSHL,
SQDMULH, SQRDMULH.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Implement the instructions in the scalar pairwise group (C3.6.8).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

We have macros for marking TCGv values as unused, checking if they
are unused and comparing them to each other. However these only exist
for TCGv_i32 and TCGv_i64; add them for TCGv_ptr as well.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Implement the pairwise integer operations in the 3-reg-same SIMD group:
ADDP, SMAXP, SMINP, UMAXP and UMINP.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Implement the SIMD 3-reg-same instructions where the size == 3 case
is reserved: SHADD, UHADD, SRHADD, URHADD, SHSUB, UHSUB, SMAX,
UMAX, SMIN, UMIN, SABD, UABD, SABA, UABA, MLA, MLS, MUL, PMUL,
SQRDMULH, SQDMULH. (None of these have scalar-3-same versions.)
This completes the non-pairwise integer instructions in this category.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Implement the SIMD 3-reg-same instructions SQADD, UQADD,
SQSUB, UQSUB, SSHL, USHL, SQSHl, UQSHL, SRSHL, URSHL,
SQRSHL, UQRSHL; these are all simple calls to existing
Neon helpers. We also enable SSHL, USHL, SRSHL and URSHL
for the 3-reg-same-scalar category (but not the others
because they can have non-size-64 operands and the
scalar_3reg_same function doesn't support that yet.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>