Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

use C headers defines as source of IO base/len for respective
values in ASL code.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

.. so OSPM could notice resource conflict if there is any.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

... for range defined at hw/acpi/ich9.c:ICH9_PROC_BASE
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

.. so that they might not be used by PCI devices.

Note:
Resort to concatenating templates with preprocessor help,
because 1.0b spec isn't supporting ConcatenateResTemplate,
as result Windows XP fails to execute PCI0._CRS method if
ConcatenateResTemplate() is used.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

.. use IO port 0cd8-0xcf7 range for CPU present bitmap
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

.. so it could be used for adding CPU hotplug to Q35 machine

Add an additional header with that will be shared between
C and ASL code: include/hw/acpi/cpu_hotplug_defs.h
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This enables support for device hotplug behind
pci bridges. Bridge devices themselves need
to be pre-configured on qemu command line.

Design:
    - at machine init time, assign "bsel" property to bridges with
      hotplug support
    - dynamically (At ACPI table read) generate ACPI code to handle
      hotplug events for each bridge with "bsel" property

Note: ACPI doesn't support adding or removing bridges by hotplug.
We detect and prevent removal of bridges by hotplug,
unless they were added by hotplug previously
(and so, are not described by ACPI).
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add support for acpi pci hotplug using the
new infrastructure.
PIIX4 legacy interface is maintained as is for
machine types 1.7 and older.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add ACPI based PCI hotplug library with bridge hotplug
support.
Design
   - each bus gets assigned "bsel" property.
   - ACPI code writes this number
     to a new BNUM register, then uses existing
     UP/DOWN registers to probe slot status;
     to eject, write number to BNUM register,
     then slot into existing EJ.

The interface is actually backwards-compatible with
existing PIIX4 ACPI (though not migration compatible).

This is split out from PIIX4 codebase so we can
reuse it for Q35 as well.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Useful for ACPI hotplug.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

some *.dsl files include another *.dsl files but there weren't
any dependicies and when included file changed target table wasn't
rebuild. Fix this by using the same auto dependency generation
as for C files.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The asl comparison will break every time the ACPI
tables are updated. This may break the git bisect.
Instead of failing print a warning on stderr
including the retained asl files, so they can be
compared offline.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

It seems that iasl has an issue when disassembles
some ACPI tables using the command line:
iasl -e DSDT -e SSDT -d HPET

Modified the iasl command line to "iasl -d HPET"
until the problem is solved. The command line
remained the same for DSDT and SSDT tables.
Reported-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Just a refactoring, ssdt_tables name was confusing as
it included other tables as well.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Double endianness convertion make this test failing on POWERPC machine
running in big-endian.

This fixes the test to success on big-endian host.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

When running the test with TEST_ACPI_REBUILD_AML=y environment
variable, the test will rebuild and validate the expected aml
files.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Acpi unit-test will fail every time the acpi tables change.
This script rebuild the expected aml files, so the test
will pass. It also validates the modifications.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The test checked if iasl is installed by running "iasl"
and checking the error output.
It is better to use the iasl executable as appears
in configuration.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Acpi unit-tests will extract iasl executable
from CONFIG_IASL define.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This test will run only if iasl is installed on the host machine.
The test plan:
 1. Dumps the ACPI tables as AML on the disk.
 2. Runs iasl to disassembly the tables into ASL files.
 3. Runs iasl to disassembly the offline AML files into ASL files.
 4. Compares the ASL files.

The test runs for both default machine and q35.
In case the test fails, it can be easily tweaked to
show the differences between the ASL files and
understand the issue.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Ensure configure will set-up links for the files
if the build is created in other directory.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Added unit-test's expected aml files to be compared
with the actual ACPI tables.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

cgcc complains that -ENOSYS is not a good value for 'bool'.

A dummy virtio will never have pending queue entries, so let us return
false.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Minimize the storage used for AppleSMC's _STA (8bit), relying on ASL
to implicitly convert it to the officially specified 32bit value.
Signed-off-by: NGabriel Somlo <somlo@cmu.edu>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

AppleSMC (-device isa-applesmc) is required to boot OS X guests.
OS X expects a SMC node to be present in the ACPI DSDT. This patch
adds a SMC node to the DSDT, and dynamically patches the return value
of SMC._STA to either 0x0B if the chip is present, or otherwise to 0x00,
before booting the guest.
Signed-off-by: NGabriel Somlo <somlo@cmu.edu>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

When qemu dies unexpectedly, for example in response to an explicit
abort() call, or (more importantly) when an external signal is delivered
to it that results in a coredump, sometimes it is useful to extract the
guest vmcore from the qemu process' memory image. The guest vmcore might
help understand an emulation problem in qemu, or help debug the guest.

This script reimplements (and cuts many features of) the
qmp_dump_guest_memory() command in gdb/Python,

  https://sourceware.org/gdb/current/onlinedocs/gdb/Python-API.html

working off the saved memory image of the qemu process. The docstring in
the patch (serving as gdb help text) describes the limitations relative to
the QMP command.

Dependencies of qmp_dump_guest_memory() have been reimplemented as needed.
I sought to follow the general structure, sticking to original function
names where possible. However, keeping it simple prevailed in some places.

The patch has been tested with a 4 VCPU, 768 MB, RHEL-6.4
(2.6.32-358.el6.x86_64) guest:

- The script printed

> guest RAM blocks:
> target_start     target_end       host_addr        message count
> ---------------- ---------------- ---------------- ------- -----
> 0000000000000000 00000000000a0000 00007f95d0000000 added       1
> 00000000000a0000 00000000000b0000 00007f960ac00000 added       2
> 00000000000c0000 00000000000ca000 00007f95d00c0000 added       3
> 00000000000ca000 00000000000cd000 00007f95d00ca000 joined      3
> 00000000000cd000 00000000000d0000 00007f95d00cd000 joined      3
> 00000000000d0000 00000000000f0000 00007f95d00d0000 joined      3
> 00000000000f0000 0000000000100000 00007f95d00f0000 joined      3
> 0000000000100000 0000000030000000 00007f95d0100000 joined      3
> 00000000fc000000 00000000fc800000 00007f960ac00000 added       4
> 00000000fffe0000 0000000100000000 00007f9618800000 added       5
> dumping range at 00007f95d0000000 for length 00000000000a0000
> dumping range at 00007f960ac00000 for length 0000000000010000
> dumping range at 00007f95d00c0000 for length 000000002ff40000
> dumping range at 00007f960ac00000 for length 0000000000800000
> dumping range at 00007f9618800000 for length 0000000000020000

- The vmcore was checked with "readelf", comparing the results against a
  vmcore written by qmp_dump_guest_memory():

> --- theirs      2013-09-12 17:38:59.797289404 +0200
> +++ mine        2013-09-12 17:39:03.820289404 +0200
> @@ -27,16 +27,16 @@
>    Type           Offset             VirtAddr           PhysAddr
>                   FileSiz            MemSiz              Flags  Align
>    NOTE           0x0000000000000190 0x0000000000000000 0x0000000000000000
> -                 0x0000000000000ca0 0x0000000000000ca0         0
> -  LOAD           0x0000000000000e30 0x0000000000000000 0x0000000000000000
> +                 0x000000000000001c 0x000000000000001c         0
> +  LOAD           0x00000000000001ac 0x0000000000000000 0x0000000000000000
>                   0x00000000000a0000 0x00000000000a0000         0
> -  LOAD           0x00000000000a0e30 0x0000000000000000 0x00000000000a0000
> +  LOAD           0x00000000000a01ac 0x0000000000000000 0x00000000000a0000
>                   0x0000000000010000 0x0000000000010000         0
> -  LOAD           0x00000000000b0e30 0x0000000000000000 0x00000000000c0000
> +  LOAD           0x00000000000b01ac 0x0000000000000000 0x00000000000c0000
>                   0x000000002ff40000 0x000000002ff40000         0
> -  LOAD           0x000000002fff0e30 0x0000000000000000 0x00000000fc000000
> +  LOAD           0x000000002fff01ac 0x0000000000000000 0x00000000fc000000
>                   0x0000000000800000 0x0000000000800000         0
> -  LOAD           0x00000000307f0e30 0x0000000000000000 0x00000000fffe0000
> +  LOAD           0x00000000307f01ac 0x0000000000000000 0x00000000fffe0000
>                   0x0000000000020000 0x0000000000020000         0
>
>  There is no dynamic section in this file.
> @@ -47,13 +47,6 @@
>
>  No version information found in this file.
>
> -Notes at offset 0x00000190 with length 0x00000ca0:
> +Notes at offset 0x00000190 with length 0x0000001c:
>    Owner                Data size       Description
> -  CORE         0x00000150      NT_PRSTATUS (prstatus structure)
> -  CORE         0x00000150      NT_PRSTATUS (prstatus structure)
> -  CORE         0x00000150      NT_PRSTATUS (prstatus structure)
> -  CORE         0x00000150      NT_PRSTATUS (prstatus structure)
> -  QEMU         0x000001b0      Unknown note type: (0x00000000)
> -  QEMU         0x000001b0      Unknown note type: (0x00000000)
> -  QEMU         0x000001b0      Unknown note type: (0x00000000)
> -  QEMU         0x000001b0      Unknown note type: (0x00000000)
> +  NONE         0x00000005      Unknown note type: (0x00000000)

- The vmcore was checked with "crash" too, again comparing the results
  against a vmcore written by qmp_dump_guest_memory():

> --- guest.vmcore.log2   2013-09-12 17:52:27.074289201 +0200
> +++ example.dump.log2   2013-09-12 17:52:15.904289203 +0200
> @@ -22,11 +22,11 @@
>  This GDB was configured as "x86_64-unknown-linux-gnu"...
>
>       KERNEL: /usr/lib/debug/lib/modules/2.6.32-358.el6.x86_64/vmlinux
> -    DUMPFILE: /home/lacos/tmp/guest.vmcore
> +    DUMPFILE: /home/lacos/tmp/example.dump
>          CPUS: 4
> -        DATE: Thu Sep 12 17:16:11 2013
> -      UPTIME: 00:01:09
> -LOAD AVERAGE: 0.07, 0.03, 0.00
> +        DATE: Thu Sep 12 17:17:41 2013
> +      UPTIME: 00:00:38
> +LOAD AVERAGE: 0.18, 0.05, 0.01
>         TASKS: 130
>      NODENAME: localhost.localdomain
>       RELEASE: 2.6.32-358.el6.x86_64
> @@ -38,12 +38,12 @@
>       COMMAND: "swapper"
>          TASK: ffffffff81a8d020  (1 of 4)  [THREAD_INFO: ffffffff81a00000]
>           CPU: 0
> -       STATE: TASK_RUNNING (PANIC)
> +       STATE: TASK_RUNNING (ACTIVE)
> +     WARNING: panic task not found
>
>  crash> bt
>  PID: 0      TASK: ffffffff81a8d020  CPU: 0   COMMAND: "swapper"
> - #0 [ffffffff81a01ed0] default_idle at ffffffff8101495d
> - #1 [ffffffff81a01ef0] cpu_idle at ffffffff81009fc6
> + #0 [ffffffff81a01ef0] cpu_idle at ffffffff81009fc6
>  crash> task ffffffff81a8d020
>  PID: 0      TASK: ffffffff81a8d020  CPU: 0   COMMAND: "swapper"
>  struct task_struct {
> @@ -75,7 +75,7 @@
>        prev = 0xffffffff81a8d080
>      },
>      on_rq = 0,
> -    exec_start = 8618466836,
> +    exec_start = 7469214014,
>      sum_exec_runtime = 0,
>      vruntime = 0,
>      prev_sum_exec_runtime = 0,
> @@ -149,7 +149,7 @@
>    },
>    tasks = {
>      next = 0xffff88002d621948,
> -    prev = 0xffff880029618f28
> +    prev = 0xffff880023b74488
>    },
>    pushable_tasks = {
>      prio = 140,
> @@ -165,7 +165,7 @@
>      }
>    },
>    mm = 0x0,
> -  active_mm = 0xffff88002929b780,
> +  active_mm = 0xffff8800297eb980,
>    exit_state = 0,
>    exit_code = 0,
>    exit_signal = 0,
> @@ -177,7 +177,7 @@
>    sched_reset_on_fork = 0,
>    pid = 0,
>    tgid = 0,
> -  stack_canary = 2483693585637059287,
> +  stack_canary = 7266362296181431986,
>    real_parent = 0xffffffff81a8d020,
>    parent = 0xffffffff81a8d020,
>    children = {
> @@ -224,14 +224,14 @@
>    set_child_tid = 0x0,
>    clear_child_tid = 0x0,
>    utime = 0,
> -  stime = 3,
> +  stime = 2,
>    utimescaled = 0,
> -  stimescaled = 3,
> +  stimescaled = 2,
>    gtime = 0,
>    prev_utime = 0,
>    prev_stime = 0,
>    nvcsw = 0,
> -  nivcsw = 1000,
> +  nivcsw = 1764,
>    start_time = {
>      tv_sec = 0,
>      tv_nsec = 0

- <name_dropping>I asked for Dave Anderson's help with verifying the
  extracted vmcore, and his comments make me think I should post
  this.</name_dropping>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

* qemu-kvm/uq/master:
  kvm: always update the MPX model specific register
  KVM: fix addr type for KVM_IOEVENTFD
  KVM: Retry KVM_CREATE_VM on EINTR
  mempath prefault: fix off-by-one error
  kvm: x86: Separately write feature control MSR on reset
  roms: Flush icache when writing roms to guest memory
  target-i386: clear guest TSC on reset
  target-i386: do not special case TSC writeback
  target-i386: Intel MPX

Conflicts:
	exec.c

aliguori: fix trivial merge conflict in exec.c
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

* otubo/seccomp:
  seccomp: add some basic shared memory syscalls to the whitelist
  seccomp: add mkdir() and fchmod() to the whitelist

Message-id: 1390231004-18392-1-git-send-email-otubo@linux.vnet.ibm.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

Initial patch for QEMU GTK support on Windows

# gpg: Signature made Mon 20 Jan 2014 11:37:58 AM PST using RSA key ID FAD62069
# gpg: Can't check signature: public key not found

* sweil/tags/for_anthony:
  gtk: Support keyboard translation for hosts running Windows

Message-id: 1390246909-18757-1-git-send-email-sw@weilnetz.de
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

hda-codec: disable streams on reset

# gpg: Signature made Tue 21 Jan 2014 02:17:12 AM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found

* kraxel/tags/pull-audio-2:
  hda-codec: disable streams on reset

Message-id: 1390299589-5082-1-git-send-email-kraxel@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

usb core+hid: add support for microsoft os descriptors

# gpg: Signature made Tue 21 Jan 2014 02:21:29 AM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found

* kraxel/tags/pull-usb-2:
  usb-hid: add microsoft os descriptor support
  usb: add support for microsoft os descriptors

Message-id: 1390299772-5368-1-git-send-email-kraxel@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

* bonzini/scsi-next:
  scsi: Support TEST UNIT READY in the dummy LUN0
  block: add .bdrv_reopen_prepare() stub for iscsi
  virtio-scsi: Prevent assertion on missed events
  virtio-scsi: Cleanup of I/Os that never started
  scsi: Assign cancel_io vector for scsi_disk_emulate_ops

Conflicts:
	block/iscsi.c

aliguori: resolve trivial merge conflict in block/iscsi.c
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

Block patches

# gpg: Signature made Fri 24 Jan 2014 08:40:53 AM PST using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found

* kwolf/tags/for-anthony: (93 commits)
  block: Switch bdrv_io_limits_intercept() to byte granularity
  qemu-iotests: Test pwritev RMW logic
  qemu-io: New command 'sleep'
  blkdebug: Make required alignment configurable
  iscsi: Set bs->request_alignment
  block: Make bdrv_pwrite() a bdrv_prwv_co() wrapper
  block: Make bdrv_pread() a bdrv_prwv_co() wrapper
  block: Change coroutine wrapper to byte granularity
  block: Assert serialisation assumptions in pwritev
  block: Align requests in bdrv_co_do_pwritev()
  block: Allow wait_serialising_requests() at any point
  block: Make overlap range for serialisation dynamic
  block: Generalise and optimise COR serialisation
  block: Make zero-after-EOF work with larger alignment
  block: Allow waiting for overlapping requests between begin/end
  block: Switch BdrvTrackedRequest to byte granularity
  block: Introduce bdrv_co_do_pwritev()
  block: write: Handle COR dependency after I/O throttling
  block: Introduce bdrv_aligned_pwritev()
  block: Introduce bdrv_co_do_preadv()
  ...

Message-id: 1390584136-24703-1-git-send-email-kwolf@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

Request sizes used to be rounded down to the next sector boundary,
allowing to bypass the I/O limit. Now all requests are accounted for
with their exact byte size.
Reported-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

There is no easy way to check that a request correctly waits for a
different request. With a sleep command we can at least approximate it.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The new 'align' option of blkdebug can be used in order to emulate
backends with a required 4k alignment on hosts which only really require
512 byte alignment.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The iSCSI backend already gets the block size from the READ CAPACITY
command it sends.  Save it so that the generic block layer gets it
too.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>