Now all linux-user targets support building with NPTL, we can make it
mandatory. This is a good idea because:
 * NPTL is no longer new and experimental; it is completely standard
 * in practice, linux-user without NPTL is nearly useless for
   binaries built against non-ancient glibc
 * it allows us to delete the rather untested code for handling
   the non-NPTL configuration

Note that this patch leaves the CONFIG_USE_NPTL ifdefs in the
bsd-user codebase alone. This makes no change for bsd-user, since
our configure test for NPTL had a "#include <linux/futex.h>"
which means bsd-user would never have been compiled with
CONFIG_USE_NPTL defined, and it still is not.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Add x86-64 implementation of cpu_set_tls() (like the kernel, we
just have to call do_arch_prctl() to set FS); this allows us to
enable NPTL.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

We can easily set the TLS on i386. Add code to do so.
Signed-off-by: NAlexander Graf <agraf@suse.de>
[PMM: also remove "target_nptl=no" line from configure, for
 consistency with other patches in this series]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Linux manages to have three separate orderings of the arguments to
the clone() syscall on different architectures. In the kernel these
are selected via CONFIG_CLONE_BACKWARDS and CONFIG_CLONE_BACKWARDS2.
Clean up our implementation of this to use similar #define names
rather than a TARGET_* ifdef ladder.

This includes behaviour changes fixing bugs on cris, x86-64, m68k,
openrisc and unicore32.  cris had explicit but wrong handling; the
others were just incorrectly using QEMU's default, which happened
to be the equivalent of CONFIG_CLONE_BACKWARDS. (unicore32 appears
to be broken in the mainline kernel in that it tries to use arg3 for
both parent_tidptr and newtls simultaneously -- we don't attempt
to emulate this bug...)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

The i386 code for the get_thread_area syscall was missing a
'break' which meant it would have fallen through into the
implementation of the following syscall; add it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

For m68k, per-thread data is a purely kernel construct with no
CPU level support. Implement it via a field in the TaskState structure,
used by cpu_set_tls() and the set_thread_area/get_thread_area
syscalls. This allows us to enable compilation with NPTL.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Provide the missing cpu_set_tls(), and resolve the FIXME in
cpu_clone_regs() by clearing the carry flag for the child.
This allows us to turn on building with NPTL for SPARC.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

The OpenRISC kernel ignores CLONE_SETTLS in its copy_thread()
implementation, so a cpu_set_tls() implementation is a no-op.
cpu_clone_regs() was setting the syscall return value in the
wrong register -- it is gpr[11], not gpr[2]. With these two
things fixed, we can compile with NPTL enabled.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NJia Liu <proljc@gmail.com>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

The target-specific headers (target_cpu.h and target_signal.h)
might need to use the target-independent structure and function
definitions of qemu.h; so include them only at the bottom of
qemu.h, not the top.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

unicore32-linux-user provides cpu_set_tls(), so the failure
to enable target_nptl was presumably an oversight. Enable it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Though threading (target_nptl) was enabled on the base PPC and MIPS
targets, it wasn't enabled for the variants mipsn32, mipsn32el,
mips64, mips64el, ppc64 or ppc46abi32 (probably an oversight).
Enable threading consistently on all these targets.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

For architectures with no linux-user target, don't claim no NPTL
support. This has no behavioural change, but it means that we
won't accidentally add a new linux-user target without threading
support in future (because attempting to do so would be a compile
failure rather than a silent lack of support).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Most targets either (a) support threading or (b) don't have a
linux-user/bsd-user target, so make it default to 'yes', with those
targets that don't support threading having to specifically say so.

This is a mechanical no-behaviour-change commit; some of the
"no" entries it adds will be taken out in later patches.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

arm-devs queue

# gpg: Signature made Mon 22 Jul 2013 06:38:52 AM CDT using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found

# By Peter Maydell (8) and Soren Brinkmann (2)
# Via Peter Maydell
* pmaydell/tags/pull-arm-devs-20130722:
  hw/arm: Use 'load_ramdisk()' for loading ramdisks w/ U-Boot header
  hw/loader: Support ramdisk with u-boot header
  vexpress: Add virtio-mmio transports
  vexpress: Make VEDBoardInfo extend arm_boot_info
  arm/boot: Allow boards to modify the FDT blob
  virtio: Implement MMIO based virtio transport
  virtio: Support transports which can specify the vring alignment
  virtio: Add support for guest setting of queue size
  arm/boot: Use qemu_devtree_setprop_sized_cells()
  device_tree: Add qemu_devtree_setprop_sized_cells() utility functions

Message-id: 1374493427-3254-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Paolo Bonzini (2) and others
# Via Paolo Bonzini
* bonzini/iommu-for-anthony:
  exec: fix incorrect assumptions in memory_access_size
  memory: Return -1 again on reads from unsigned regions
  memory: actually set the owner
  exec.c: Pass correct pointer type to qemu_ram_ptr_length

Message-id: 1374264478-23913-1-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Michael Tokarev (2) and others
# Via Michael Tokarev
* mjt/trivial-patches:
  doc: monitor multiplexing rewording
  block/m25p80: Update Micron entries
  Fix command example in qemu.sasl
  slirp: remove mbuf(m_hdr,m_dat) indirection
  linux-user: declare sys_futex to have 6 arguments

Message-id: 1374225073-12959-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Peter Lieven (5) and others
# Via Stefan Hajnoczi
* stefanha/block:
  block/raw: add .bdrv_get_info
  block: fix bdrv_read_unthrottled()
  cpus: Let vm_stop[_force_state]() always flush block devices
  block-migration: efficiently encode zero blocks
  block/raw: add bdrv_co_write_zeroes
  block: add bdrv_write_zeroes()
  block: fix vvfat error path for enable_write_target
  QEMUBH: make AioContext's bh re-entrant
  dataplane: sync virtio.c and vring.c virtqueue state
  gluster: Add discard support for GlusterFS block driver.
  gluster: Use pkg-config to configure GlusterFS block driver

Message-id: 1374223132-29107-1-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Richard Henderson
# Via Richard Henderson
* rth/axp-next:
  pc-bios: Update palcode-clipper
  target-alpha: Move alarm to vm_clock

Message-id: 1374161033-11449-1-git-send-email-rth@twiddle.net
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Markus Armbruster
# Via Stefan Hajnoczi
* stefanha/tracing:
  trace-events: Fix up source file comments
  trace-events: Drop unused events
  milkymist-minimac2: Fix minimac2_read/_write tracepoints
  slavio_misc: Fix slavio_led_mem_readw/_writew tracepoints
  cleanup-trace-events.pl: New

Message-id: 1374119369-26496-1-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The load_ramdisk function is used to load ramdisk featuring a U-Boot
header.
Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1373323202-17083-3-git-send-email-soren.brinkmann@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Introduce 'load_ramdisk()' which can load "normal" ramdisks and ramdisks
with a u-boot header.
To enable this and leverage synergies 'load_uimage()' is refactored to
accomodate this additional use case.
Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1373323202-17083-2-git-send-email-soren.brinkmann@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add some virtio-mmio transports to the vexpress board model,
together with a modify_dtb hook which adds them to the device
tree so that the kernel will probe for them. We put them
in a reserved area of the address map.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-9-git-send-email-peter.maydell@linaro.org

Make the VEDBoardInfo struct extend arm_boot_info; this will
allow us to get at the VEDBoardInfo information inside callbacks
from arm/boot code.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-8-git-send-email-peter.maydell@linaro.org

Add a callback hook in arm_boot_info to allow board models to
modify the device tree blob if they need to. (The major expected
use case is to add virtio-mmio nodes for virtio-mmio transports
that exist in QEMU but not in the hardware.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-7-git-send-email-peter.maydell@linaro.org

Add support for the generic MMIO based virtio transport.

This patch includes some fixes for bugs spotted by
Ying-Shiuan Pan <yspan@itri.org.tw>.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1373977512-28932-6-git-send-email-peter.maydell@linaro.org
[Fred changes: updated to new virtio-bus mechanisms]
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
[PMM changes:
 * fixed trivial makefile conflict
 * removed unused int_enable
 * host_features doesn't need migrating
 * reset guest accessible state in the reset function
 * minor style fixes like extra blank lines
 * RAZ/WI if there's no backend
 * made transport size 0x200, in line with kvmtool
 * set has_variable_vring_alignment
]

Support virtio transports which can specify the vring alignment
(ie where the guest communicates this to the host) by providing
a new virtio_queue_set_align() function. (The default alignment
remains as before.)

Transports which wish to make use of this must set the
has_variable_vring_alignment field in their VirtioBusClass
struct to true; they can then change the alignment via
virtio_queue_set_align().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-5-git-send-email-peter.maydell@linaro.org

The MMIO virtio transport spec allows the guest to tell the host how
large the queue size is. Add virtio_queue_set_num() function which
implements this in the QEMU common virtio support code.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1373977512-28932-4-git-send-email-peter.maydell@linaro.org

Replace the opencoded assembly of the reg property array for the
/memory node with a call to qemu_devtree_setprop_sized_cells().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1373977512-28932-3-git-send-email-peter.maydell@linaro.org

We already have a qemu_devtree_setprop_cells() which sets a dtb
property to an array of cells whose values are specified by varargs.
However for the fairly common case of setting a property to a list
of addresses or of address,size pairs the number of cells used by
each element in the list depends on the parent's #address-cells
and #size-cells properties. To make this easier we provide an analogous
qemu_devtree_setprop_sized_cells() macro which allows the number
of cells used by each element to be specified. This is implemented
using an underlying qemu_devtree_setprop_sized_cells_from_array()
function which takes the values and sizes as an array; this may
also be directly useful for cases where the cell contents are
constructed programmatically.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1373977512-28932-2-git-send-email-peter.maydell@linaro.org

Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

- Split 32Mb and 256Mb parts into a11 and a13 variants.
- Add the 4K sector flag to the 128Mb parts.  (These entries were taken from
  the Linux kernel list, which is missing the flag.)
- Fill out the table of sizes with entries for 64Mb parts.

Prodded by Peter Crosthwaite.
Signed-off-by: NEd Maste <emaste@freebsd.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

sasldblistusers2 doesn't have a '-a' option
Signed-off-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

sys_futex has 6 arguments, and all of these need to be copied. Fix incorrect
declaration in the mips_syscall_args array.

This change fixes the cases where the 5th and 6th arguments have non-zero
value and have importance. An example is a Linux implementation of
pthread_cond_wait() function.
Signed-off-by: NPetar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NPeter Lieven <pl@kamp.de>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Even if the VM is already stopped, we cannot assume that all data has
already been successfully flushed to disk. The flush during the previous
vm_stop() could have failed.

Run bdrv_flush_all() unconditionally so that we get an error each time
if the block device isn't really flushed.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

this patch adds a efficient encoding for zero blocks by
adding a new flag indicating a block is completely zero.

additionally bdrv_write_zeros() is used at the destination
to efficiently write these zeroes. depending on the implementation
this avoids that the destination target gets fully provisioned.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NPeter Lieven <pl@kamp.de>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NPeter Lieven <pl@kamp.de>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>