Use the safe_syscall wrapper for epoll_wait and epoll_pwait syscalls.

Since we now directly use the host epoll_pwait syscall for both
epoll_wait and epoll_pwait, we don't need the configure machinery
to check whether glibc supports epoll_pwait(). (The kernel has
supported the syscall since 2.6.19 so we can assume it's always there.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Use the safe_syscall wrapper for the poll and ppoll syscalls.
Since not all host architectures will have a poll syscall, we
have to rewrite the TARGET_NR_poll handling to use ppoll instead
(we can assume everywhere has ppoll by now).

We take the opportunity to switch to the code structure
already used in the implementation of epoll_wait and epoll_pwait,
which uses a switch() to avoid interleaving #if and if (),
and to stop using a variable with a leading '_' which is in
the implementation's namespace.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Use the safe_syscall wrapper for the clock_nanosleep and nanosleep
syscalls.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Use the safe_syscall wrapper for the rt_sigtimedwait syscall.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Use the safe_syscall wrapper for the flock syscall.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Use the safe_syscall wrapper for mq_timedsend and mq_timedreceive syscalls.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Use the safe_syscall wrapper for msgsnd and msgrcv syscalls.
This is made slightly awkward by some host architectures providing
only a single 'ipc' syscall rather than separate syscalls per
operation; we provide safe_msgsnd() and safe_msgrcv() as wrappers
around safe_ipc() to handle this if needed.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Use the safe_syscall wrapper for the send, sendto, sendmsg, recv,
recvfrom and recvmsg syscalls.

RV: adjusted to apply
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Use the safe_syscall wrapper for the connect syscall.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Use the safe_syscall wrapper for readv and writev syscalls.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Fix a missing host-to-target errno conversion in the 64-bit
fadvise syscall emulation.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Fix errors in the implementation of NR_fadvise64 and NR_fadvise64_64
for 32-bit guests, which pass their off_t values in register pairs.
We can't use the 64-bit code path for this, so split out the 32-bit
cases, so that we can correctly handle the "only offset is 64-bit"
and "both offset and length are 64-bit" syscall flavours, and
"uses aligned register pairs" and "does not" flavours of target.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

32-bit ARM has an odd variant of the fadvise syscall which has
rearranged arguments, which we try to implement. Unfortunately we got
the rearrangement wrong.

This is a six-argument syscall whose arguments are:
 * fd
 * advise parameter
 * offset high half
 * offset low half
 * len high half
 * len low half

Stop trying to share code with the standard fadvise syscalls,
and just implement the syscall with the correct argument order.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Use cfi directives in the x86-64 safe_syscall to allow gdb to get
backtraces right from within it. (In particular this will be
quite a common situation if the user interrupts QEMU while it's
in a blocked safe-syscall: at the point of the syscall insn RBP
is in use for something else, and so gdb can't find the frame then
without assistance.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Reimplement target_to_host_siginfo() to use __get_user(), which
handles possibly misaligned source guest structures correctly.
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

The siginfo_t struct includes a union. The correct way to identify
which fields of the union are relevant is complicated, because we
have to use a combination of the si_code and si_signo to figure out
which of the union's members are valid.  (Within the host kernel it
is always possible to tell, but the kernel carefully avoids giving
userspace the high 16 bits of si_code, so we don't have the
information to do this the easy way...) We therefore make our best
guess, bearing in mind that a guest can spoof most of the si_codes
via rt_sigqueueinfo() if it likes.  Once we have made our guess, we
record it in the top 16 bits of the si_code, so that tswap_siginfo()
later can use it.  tswap_siginfo() then strips these top bits out
before writing si_code to the guest (sign-extending the lower bits).

This fixes a bug where fields were sometimes wrong; in particular
the LTP kill10 test went into an infinite loop because its signal
handler got a si_pid value of 0 rather than the pid of the sending
process.

As part of this change, we switch to using __put_user() in the
tswap_siginfo code which writes out the byteswapped values to
the target memory, in case the target memory pointer is not
sufficiently aligned for the host CPU's requirements.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

If there is a signal pending during fork() the signal handler will
erroneously be called in both the parent and child, so handle any
pending signals first.
Signed-off-by: NTimothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-20-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Use the safe_syscall wrapper for the kill, tkill and tgkill syscalls.
Without this, if a thread sent a SIGKILL to itself it could kill the
thread before we had a chance to process a signal that arrived just
before the SIGKILL, and that signal would get lost.

We drop all the ifdeffery for tkill and tgkill, because every guest
architecture we support implements them, and they've been in Linux
since 2003 so we can assume the host headers define the __NR_tkill
and __NR_tgkill constants.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Without this a signal could vanish on thread exit.
Signed-off-by: NTimothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-26-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Fix races between signal handling and the pause syscall by
reimplementing it using block_signals() and sigsuspend().
(Using safe_syscall(pause) would also work, except that the
pause syscall doesn't exist on all architectures.)
Signed-off-by: NTimothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-28-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: tweaked commit message]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Block signals while emulating sigaction. This is a non-interruptible
syscall, and using block_signals() avoids races where the host
signal handler is invoked and tries to examine the signal handler
data structures while we are updating them.
Signed-off-by: NTimothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-29-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: expanded commit message]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

If a synchronous signal and an asynchronous signal arrive near simultaneously,
and the signal number of the asynchronous signal is lower than that of the
synchronous signal the the handler for the asynchronous would be called first,
and then the handler for the synchronous signal would be called within or
after the first handler with an incorrect context.

This is fixed by queuing synchronous signals separately. Note that this does
risk delaying a asynchronous signal until the synchronous signal handler
returns rather than handling the signal on another thread, but this seems
unlikely to cause problems for real guest programs and is unavoidable unless
we could guarantee to roll back and reexecute whatever guest instruction
caused the synchronous signal (which would be a bit odd if we've already
logged its execution, for instance, and would require careful analysis of
all guest CPUs to check it was possible in all cases).
Signed-off-by: NTimothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-24-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: added a comment]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

As host signals are now blocked whenever guest signals are blocked, the
queue of realtime signals is now in Linux. The QEMU queue is now
redundant and can be removed. (We already did not queue non-RT signals, and
none of the calls to queue_signal() except the one in host_signal_handler()
pass an RT signal number.)
Signed-off-by: NTimothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-23-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
[PMM: minor commit message tweak]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Signed-off-by: NTimothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-22-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Both queue_signal() and process_pending_signals() did check for default
actions of signals, this is redundant and also causes fatal and stopping
signals to incorrectly cause guest system calls to be interrupted.

The code in queue_signal() is removed.
Signed-off-by: NTimothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-21-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

If multiple host signals are received in quick succession they would
be queued in TaskState then delivered to the guest in spite of
signals being supposed to be blocked by the guest signal handler's
sa_mask. Fix this by decoupling the guest signal mask from the
host signal mask, so we can have protected sections where all
host signals are blocked. In particular we block signals from
when host_signal_handler() queues a signal from the guest until
process_pending_signals() has unqueued it. We also block signals
while we are manipulating the guest signal mask in emulation of
sigprocmask and similar syscalls.

Blocking host signals also ensures the correct behaviour with respect
to multiple threads and the overrun count of timer related signals.
Alas blocking and queuing in qemu is still needed because of virtual
processor exceptions, SIGSEGV and SIGBUS.

Blocking signals inside process_pending_signals() protects against
concurrency problems that would otherwise happen if host_signal_handler()
ran and accessed the signal data structures while process_pending_signals()
was manipulating them.

Since we now track the guest signal mask separately from that
of the host, the sigsuspend system calls must track the signal
mask passed to them, because when we process signals as we leave
the sigsuspend the guest signal mask in force is that passed to
sigsuspend.
Signed-off-by: NTimothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-19-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: make signal_pending a simple flag rather than a word with two flag bits;
 ensure we don't call block_signals() twice in sigreturn codepaths;
 document and assert() the guarantee that using do_sigprocmask() to
 get the current mask never fails;  use the qemu atomics.h functions
 rather than raw volatile variable access; add extra commentary and
 documentation; block SIGSEGV/SIGBUS in block_signals() and in
 process_pending_signals() because they can't occur synchronously here;
 check the right do_sigprocmask() call for errors in ssetmask syscall;
 expand commit message; fixed sigsuspend() hanging]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Use the safe_syscall wrapper for sigsuspend syscalls. This
means that we will definitely deliver a signal that arrives
before we do the sigsuspend call, rather than blocking first
and delivering afterwards.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Some host syscalls take an argument specifying the size of a
host kernel's sigset_t (which isn't necessarily the same as
that of the host libc's type of that name). Instead of hardcoding
_NSIG / 8 where we do this, define and use a SIGSET_T_SIZE macro.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

All the architecture specific handlers for sigreturn include calls
to do_sigprocmask(SIGSETMASK, &set, NULL) to set the signal mask
from the uc_sigmask in the context being restored. Factor these
out into calls to a set_sigmask() function. The next patch will
want to add code which is not run when setting the signal mask
via do_sigreturn, and this change allows us to separate the two
cases.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Fix a stray tab-indented linux in linux-user/signal.c.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Move the handle_pending_signal() function above process_pending_signals()
to avoid the need for a forward declaration. (Whitespace only change.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Factor out the code to handle a single signal from the
process_pending_signals() function. The use of goto for flow control
is OK currently, but would get significantly uglier if extended to
allow running the handle_signal code multiple times.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Some IFLA_* symbols can be missing in the host linux/if_link.h,
but as they are enums and not "#defines", check in "configure" if
last known  (IFLA_PROTO_DOWN) is available and if not, disable
management of NETLINK_ROUTE protocol.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

This is, for instance, needed to log in a container.

Without this, the user cannot be identified and the console login
fails with "Login incorrect".
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

This is the protocol used by udevd to manage kernel events.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

rtnetlink is needed to use iproute package (ip addr, ip route)
and dhcp client.

Examples:

Without this patch:
    # ip link
    Cannot open netlink socket: Address family not supported by protocol
    # ip addr
    Cannot open netlink socket: Address family not supported by protocol
    # ip route
    Cannot open netlink socket: Address family not supported by protocol
    # dhclient eth0
    Cannot open netlink socket: Address family not supported by protocol
    Cannot open netlink socket: Address family not supported by protocol

With this patch:
    # ip link
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    51: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT qlen 1000
        link/ether 00:16:3e:89:6b:d7 brd ff:ff:ff:ff:ff:ff
    # ip addr show eth0
    51: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP qlen 1000
        link/ether 00:16:3e:89:6b:d7 brd ff:ff:ff:ff:ff:ff
        inet 192.168.122.197/24 brd 192.168.122.255 scope global eth0
           valid_lft forever preferred_lft forever
        inet6 fe80::216:3eff:fe89:6bd7/64 scope link
           valid_lft forever preferred_lft forever
    # ip route
    default via 192.168.122.1 dev eth0
    192.168.122.0/24 dev eth0  proto kernel  scope link  src 192.168.122.197
    # ip addr flush eth0
    # ip addr add 192.168.122.10 dev eth0
    # ip addr show eth0
    51: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP qlen 1000
        link/ether 00:16:3e:89:6b:d7 brd ff:ff:ff:ff:ff:ff
        inet 192.168.122.10/32 scope global eth0
           valid_lft forever preferred_lft forever
    # ip route add 192.168.122.0/24 via 192.168.122.10
    # ip route
        192.168.122.0/24 via 192.168.122.10 dev eth0
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Original qemu-binfmt-conf.sh is only able to write configuration
into /proc/sys/fs/binfmt_misc, and the configuration is lost on reboot.

This script can configure debian and systemd services to restore
configuration on reboot. Moreover, it is able to manage binfmt
credential and to configure the path of the interpreter.

List of supported CPU is:

i386 i486 alpha arm sparc32plus ppc ppc64 ppc64le
m68k mips mipsel mipsn32 mipsn32el mips64 mips64el
sh4 sh4eb s390x aarch64

Usage: qemu-binfmt-conf.sh [--qemu-path PATH][--debian][--systemd CPU]
                           [--help][--credential yes|no][--exportdir PATH]

       Configure binfmt_misc to use qemu interpreter

       --help:       display this usage
       --qemu-path:  set path to qemu interpreter (/usr/local/bin)
       --debian:     don't write into /proc,
                     instead generate update-binfmts templates
       --systemd:    don't write into /proc,
                     instead generate file for systemd-binfmt.service
                     for the given CPU
       --exportdir:  define where to write configuration files
                     (default: /etc/binfmt.d or /usr/share/binfmts)
       --credential: if yes, credential an security tokens are
                     calculated according to the binary to interpret

    To import templates with update-binfmts, use :

        sudo update-binfmts --importdir /usr/share/binfmts --import qemu-CPU

    To remove interpreter, use :

        sudo update-binfmts --package qemu-CPU --remove qemu-CPU /usr/local/bin

    With systemd, binfmt files are loaded by systemd-binfmt.service

    The environment variable HOST_ARCH allows to override 'uname' to generate
    configuration files for a different architecture than the current one.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

target-arm queue:
 * support instruction syndrome info for data aborts from A64 to EL2
 * add HSTR_EL2 register
 * fix incorrect ESR IL bits in various syndrome register cases
 * virt: fix limit of 64-bit ACPI/ECAM PCI MMIO range
 * gicv2: RAZ/WI non-sec access to sec interrupts
 * i2c: add aspeed i2c controller
 * virt: Reject gic-version=host for non-KVM (don't segv on aarch64 host)
 * xlnx-zynqmp: Add a secure prop to en/disable ARM Security Extensions
 * xlnx-zynqmp: Support KVM on AArch64 hosts
 * ptimer: Various fixes for awkward corner cases
 * char: QOMify various ARM UART models
 * char: get rid of qemu_char_get_next_serial
 * target-arm: Fix TTBR selecting logic on AArch32 Stage 2 translation
 * zynqmp: Add the ZCU102 board

# gpg: Signature made Mon 06 Jun 2016 17:01:11 BST
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20160606-1: (25 commits)
  zynqmp: Add the ZCU102 board
  target-arm: Fix TTBR selecting logic on AArch32 Stage 2 translation
  char: get rid of qemu_char_get_next_serial
  hw/char: QOM'ify xilinx_uartlite model
  hw/char: QOM'ify stm32f2xx_usart model
  hw/char: QOM'ify digic-uart model
  hw/char: QOM'ify cadence_uart model
  hw/char: QOM'ify pl011 model
  hw/ptimer: Introduce ptimer_get_limit
  hw/ptimer: Support "on the fly" timer mode switch
  hw/ptimer: Update .delta on period/freq change
  hw/ptimer: Perform counter wrap around if timer already expired
  hw/ptimer: Fix issues caused by the adjusted timer limit value
  xlnx-zynqmp: Use the in kernel GIC model for KVM runs
  xlnx-zynqmp: Delay realization of GIC until post CPU realization
  xlnx-zynqmp: Make the RPU subsystem optional
  xlnx-zynqmp: Add a secure prop to en/disable ARM Security Extensions
  hw/arm/virt: Reject gic-version=host for non-KVM
  i2c: add aspeed i2c controller
  hw/intc/gic: RAZ/WI non-sec access to sec interrupts
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Most Zynq UltraScale+ users will be targetting and using the ZCU102
board instead of the development focused EP108. To make our QEMU machine
names clearer add a ZCU102 machine model.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: cc82eec026b2febfca252d73362bb7084616c1ad.1464213234.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Address size is 40-bit for the AArch32 stage 2 translation,
and t0sz can be negative (from -8 to 7),
so we need to adjust it to use the existing TTBR selecting logic.
Signed-off-by: NSergey Sorokin <afarallax@yandex.ru>
Message-id: 1464974151-1231644-1-git-send-email-afarallax@yandex.ru
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>