- 14 7月, 2012 1 次提交
-
-
由 Corey Bryant 提交于
Signed-off-by: NCorey Bryant <coreyb@linux.vnet.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 16 6月, 2012 2 次提交
-
-
由 Daniel P. Berrange 提交于
Allow certain event types to be rate limited to avoid flooding monitor clients. The monitor_protocol_event() method is changed such that instead of immediately emitting the event to Monitor instances, it will call a new monitor_protocol_event_queue() method. This will check to see if the rate limit for the event has been exceeded, and if so schedule a timer to wakeup at the end of the rate limit period. If further events arrive before the timer fires, the previously queued event will be discarded in favour of the new event. The event will eventually be emitted when the timer fires. This logic is applied to RTC_CHANGE, BALLOON_CHANGE & WATCHDOG events, since the data associated with these events is stateless * monitor.c: Add support for rate limiting * monitor.h: Define monitor_global_init for one-time setup tasks * vl.c: Invoke monitor_global_init * trace-events: Add hooks for monitor event tracing Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Acked-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Daniel P. Berrange 提交于
After setting a balloon target value, applications have to continually poll 'query-balloon' to determine whether the guest has reacted to this request. The virtio-balloon backend knows exactly when the guest has reacted though, and thus it is possible to emit a JSON event to tell the mgmt application whenever the guest balloon changes. This introduces a new 'qemu_balloon_changed()' API which is to be called by balloon driver backends, whenever they have a change in balloon value. This takes the 'actual' balloon value, as would be found in the BalloonInfo struct. The qemu_balloon_change API emits a JSON monitor event which looks like: {"timestamp": {"seconds": 1337162462, "microseconds": 814521}, "event": "BALLOON_CHANGE", "data": {"actual": 944766976}} * balloon.c, balloon.h: Introduce qemu_balloon_changed() for emitting balloon change events on the monitor * hw/virtio-balloon.c: Invoke qemu_balloon_changed() whenever the guest changes the balloon actual value * monitor.c, monitor.h: Define QEVENT_BALLOON_CHANGE Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Acked-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 05 6月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
Sometimes it is neccessary for an application to determine whether a particular QMP event is available, so they can decide whether to use compatibility code instead. This introduces a new 'query-events' command to QMP to do just that { "execute": "query-events" } {"return": [{"name": "WAKEUP"}, {"name": "SUSPEND"}, {"name": "DEVICE_TRAY_MOVED"}, {"name": "BLOCK_JOB_CANCELLED"}, {"name": "BLOCK_JOB_COMPLETED"}, ...snip... {"name": "SHUTDOWN"}]} * monitor.c: Turn MonitorEvent -> string conversion into a lookup from a static table of constant strings. Add impl of qmp_query_events monitor command handler * qapi-schema.json, qmp-commands.hx: Define contract of query-events command Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 09 5月, 2012 2 次提交
-
-
由 Luiz Capitulino 提交于
The M type converts from megabytes to bytes. However, the value can be negative before the conversion, which will lead to a flawed conversion. For example, this: (qemu) balloon -1000000000000011 (qemu) Just "works", but the value passed by the balloon command will be something else. This patch fixes this problem by requering a positive value before converting. There's really no reason to accept a negative value for the M type. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Luiz Capitulino 提交于
It's not checked currently, so something like: (qemu) balloon -100000000000001111114334234 (qemu) Will just "work" (in this case the balloon command will get a random value). Fix it by checking if strtoul()/strtoull() overflowed. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
- 27 3月, 2012 1 次提交
-
-
由 Paolo Bonzini 提交于
"O" is being used by the transaction and qom-set commands to mean "any QObject", but it really means "do not validate the argument list". Add a new specifier with the correct meaning. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 19 3月, 2012 2 次提交
-
-
由 Yonit Halperin 提交于
Report QERR_MISSING_PARAMETER when port is missing. Otherwise QERR_UNDEFINED_ERROR will occur. rhbz #795652 Signed-off-by: NYonit Halperin <yhalperi@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Jeff Cody 提交于
Some minor code cleanup: the 'qapi' bool field in mon_cmd_t is unused, and can be removed. Signed-off-by: NJeff Cody <jcody@redhat.com> Acked-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 15 3月, 2012 2 次提交
-
-
由 Andreas Färber 提交于
Scripted conversion: for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do sed -i "s/CPUState/CPUArchState/g" $file done All occurrences of CPUArchState are expected to be replaced by QOM CPUState, once all targets are QOM'ified and common fields have been extracted. Signed-off-by: NAndreas Färber <afaerber@suse.de> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Use CPUX86State etc. instead (hand-converted). Signed-off-by: NAndreas Färber <afaerber@suse.de> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 25 2月, 2012 1 次提交
-
-
由 Gerd Hoffmann 提交于
Send qmp events on suspend and wakeup so libvirt has a chance to track the vm state. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 23 2月, 2012 1 次提交
-
-
由 Luiz Capitulino 提交于
It's emitted whenever the tray is moved by the guest or by HMP/QMP commands. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Acked-by: NKevin Wolf <kwolf@redhat.com>
-
- 21 2月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
With the acceptance of some new APIs to libspice-server.so it is possible to add support for SPICE to the 'add_client' monitor command, bringing parity with VNC. Since SPICE can use TLS or plain connections, the command also gains a new 'tls' parameter to specify whether TLS should be attempted on the injected client sockets. This new feature is only enabled if building against a libspice-server >= 0.10.1 * qmp-commands.hx: Add 'tls' parameter & missing doc for 'skipauth' parameter * monitor.c: Wire up SPICE for 'add_client' command * ui/qemu-spice.h, ui/spice-core.c: Add qemu_spice_display_add_client API to wire up from monitor [1] http://cgit.freedesktop.org/spice/spice/commit/server/spice.h?id=d55b68b6b44f2499278fa860fb47ff22f5011faa http://cgit.freedesktop.org/spice/spice/commit/server/spice.h?id=bd07dde530d9504e1cfe7ed5837fc00c26f36716 Changes in v3: - Added 'optional' flag to new parameters documented - Added no-op impl of qemu_spice_display_add_client when SPICE is disabled during build Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 18 2月, 2012 1 次提交
-
-
由 Max Filippov 提交于
Command dumps valid ITLB and DTLB entries. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
-
- 26 1月, 2012 3 次提交
-
-
由 Stefan Hajnoczi 提交于
Add query-block-jobs, which shows the progress of ongoing block device operations. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
Add block_job_cancel, which stops an active block streaming operation. When the operation has been cancelled the new BLOCK_JOB_CANCELLED event is emitted. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
Add the block_stream command, which starts copy backing file contents into the image file. Also add the BLOCK_JOB_COMPLETED QMP event which is emitted when image streaming completes. Later patches add control over the background copy speed, cancelation, and querying running streaming operations. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 18 1月, 2012 6 次提交
-
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Include the name of the encrypted file. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Anthony Liguori 提交于
HMP is now implemented in terms of QMP. The monitor has a bunch of logic to deal with HMP right now like readline support. Export it from the monitor so we can consume it in hmp.c. In short time, hmp.c will take over all of the readline bits. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Drop the qerror_report() call from it and let its callers set the error themselves. This also allows for dropping the 'ret' variable. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 06 12月, 2011 6 次提交
-
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Please, note that the QMP command has a new 'cpu-index' parameter. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Commit 5bc465e4 converted only the HMP part of the system_powerdown command to the QAPI, this commit completes it by converting the QMP part too. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 17 11月, 2011 1 次提交
-
-
由 Markus Armbruster 提交于
stat() can fail for a file name just read with readdir(). Easiest way to trigger is a dangling symbolic link --- look ma, no race! When it fails, file_completion() uses sb.st_mode uninitialized. If the directory bit happens to be set, it appends a "/" to the completed name. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 02 11月, 2011 1 次提交
-
-
由 Wayne Xia 提交于
This patch would try sort the command list in monitor at runtime. As a result, command help and help info would show a more friendly sorted command list. For eg: (qemu)help acl_add acl_policy acl_remove acl_reset acl_show balloon block_passwd ... the command list is sorted. v3: using qsort function to sort the command list. Tested-by: NWenyi Gao <wenyi@linux.vnet.ibm.com> Signed-off-by: NWayne Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 27 10月, 2011 8 次提交
-
-
由 Luiz Capitulino 提交于
Previous commits converted all existing QMP commands to the QAPI, now each info command does its own QMP call. Let's then drop all QMP command handling code from do_info(). Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Because QMP development originated in the monitor, it has inherited the monitor's distinction between query- and non-query commands. However, previous commits unified both commands and the distinction is gone. This commit drops the query commands dispatch table and does some simplifications along the way. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
This also fixes a bug with the old version: QMP would invert device id and vendor id. This would look ok on HMP because it was printing "device:vendor" instead of "vendor:device". Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Please, note that some of the code supporting memory statistics is still around (eg. virtio_balloon_receive_stats() and reset_stats()). Also, the qmp_query_balloon() function is synchronous and thus doesn't make any use of the (not fully working) monitor's asynchronous command support (the old non-qapi implementation did). Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
There are three important remarks in relation to the non-qapi command: 1. This commit also fixes the behavior of the 'query-vnc' and 'info vnc' commands to return an error when qemu is built without VNC support (ie. --disable-vnc). The non-qapi command would return the OK response in QMP and no response in HMP 2. The qapi version explicitly marks the fields 'host', 'family', 'service' and 'auth' as optional. Their are not documented as optional in the non-qapi command doc, but they would not be returned if vnc support is disabled. The qapi version maintains the same semantics, but documents those fields correctly 3. The 'clients' field, which is a list, is marked as optional but is always returned. If there are no clients connected an empty list is returned. This is not the Right Way to this in the qapi but it's how the non-qapi command used to work Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-