In order to run unit tests under semihosting, it is necessary to pass the
application exit code back to the system.

ARM defines only the code to be used for non-error application exit
(ADP_Stopped_ApplicationExit), all other codes should return non-zero
exit codes.

This patch checks if the application code passed via TARGET_SYS_EXIT is
ADP_Stopped_ApplicationExit, and return 0, otherwise return 1.
Signed-off-by: NLiviu Ionescu <ilg@livius.net>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

TriCore BOL, BRC, BRN, BRR, RC, RCPW, RCRR, RCR, RLC and RCR insn added

# gpg: Signature made Wed 10 Dec 2014 11:21:58 GMT using RSA key ID 6B69CA14
# gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>"

* remotes/bkoppelmann/tags/pull-tricore-20141210:
  target-tricore: Add instructions of RCR opcode format
  target-tricore: Add instructions of RLC opcode format
  target-tricore: Add instructions of RCPW, RCRR and RCRW opcode format
  target-tricore: Make TRICORE_FEATURES implying others.
  target-tricore: Add instructions of RC opcode format
  target-tricore: Add instructions of BRR opcode format
  target-tricore: Add instructions of BRN opcode format
  target-tricore: Add instructions of BRC opcode format
  target-tricore: Add instructions of BOL opcode format
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vnc-enc-tight fix, keymaps code style.

# gpg: Signature made Wed 10 Dec 2014 09:24:33 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vnc-20141210-1:
  keymaps: correct keymaps.c following Qemu coding style
  vnc-enc-tight: fix Arguments in wrong order
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add instructions of RCR opcode format.
Add helper for madd32/64_ssov and madd32/64_suov.
Add helper for msub32/64_ssov and msub32/64_suov.
Add microcode generator function madd/msub for 32bit and 64bit, which calculate a mul and a add/sub.
OPC2_32_RCR_MSUB_U_32 -> OPC2_32_RCR_MSUB_U_32.
Signed-off-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Add instructions of RLC opcode format.
Add helper psw_write/read.
Add microcode generator gen_mtcr/mfcr, which loads/stores a value to a core special function register, which are defined in csfr.def
Signed-off-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Add instructions of RCPW, RCRR and RCRW opcode format.
Add microcode generator function gen_insert.
Signed-off-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Since all the TriCore instructionsets are subsets of each other (1.3 C 1.3.1 C 1.6),
make the features implying each other, e.g 1.6 also has 1.3.1 and 1.3. This way
we only need to check our features for the instructionset, where a instruction was first introduced.
Signed-off-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Add instructions of RC opcode format.
Add helper for mul, sha, absdif with signed saturation on overflow.
Add helper for add, sub, mul with unsigned saturation on overflow.
Add microcode generator functions:
    * gen_add_CC, which calculates the carry bit.
    * gen_addc_CC, which adds the carry bit to the add and calculates the carry bit.
    * gen_absdif, which calculates the absolute difference.
    * gen_mul_i64s/u, which mul two 32 bits val into one 64bit reg.
    * gen_sh_hi, which shifts two 16bit words in one reg.
    * gen_sha_hi, which does a arithmetic shift on two 16bit words.
    * gen_sh_cond, which shifts left a reg by one and writes the result of cond into the lsb.
    * gen_accumulating_cond, which ands/ors/xors the result of cond of the lsbs
      with the lsb of the result.
    * gen_eqany_bi/hi, which checks ever byte/hword on equality.
Signed-off-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Add instructions of BRR opcode format.
Add MASK_OP_BRR_DISP15_SEXT.
Signed-off-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Add instructions of BRN opcode format.
Add MASK_OP_BRN_DISP15_SEXT.
Signed-off-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Add instructions of BRC opcode format.
Fixed OP2_BRC_JGE -> OP2_32_BRC_JGE
Signed-off-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Add instructions of BOL opcode format.
Signed-off-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

It's hard to read because of the confused coding
style in this file. Let's correct it following Qemu
coding style.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Arguments in wrong order (SWAPPED_ARGUMENTS)
The positions of arguments in the call to
tight_fill_palette do not match the ordering of the parameters:
 &fg is passed to bg
 &bg is passed to fg

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

cirrus: fix blit region check

# gpg: Signature made Thu 04 Dec 2014 11:54:57 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-cve-2014-8106-20141204-1:
  cirrus: don't overflow CirrusVGAState->cirrus_bltbuf
  cirrus: fix blit region check
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Message-id: 1417166789-1960-1-git-send-email-arei.gonglei@huawei.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This is CVE-2014-8106.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Issues:
 * Doesn't check pitches correctly in case it is negative.
 * Doesn't check width at all.

Turn macro into functions while being at it, also factor out the check
for one region which we then can simply call twice for src + dst.

This is CVE-2014-8106.
Reported-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

VirtIO devices now remember which endianness they're operating in in order
to support targets which may have guests of either endianness, such as
powerpc.  This endianness state is transferred in a subsection of the
virtio device's information.

With virtio-rng this can lead to an abort after a loadvm hitting the
assert() in virtio_is_big_endian().  This can be reproduced by doing a
migrate and load from file on a bi-endian target with a virtio-rng device.
The actual guest state isn't particularly important to triggering this.

The cause is that virtio_rng_load_device() calls virtio_rng_process() which
accesses the ring and thus needs the endianness.  However,
virtio_rng_process() is called via virtio_load() before it loads the
subsections.  Essentially the ->load callback in VirtioDeviceClass should
only be used for actually reading the device state from the stream, not for
post-load re-initialization.

This patch fixes the bug by moving the virtio_rng_process() after the call
to virtio_load().  Better yet would be to convert virtio to use vmsd and
have the virtio_rng_process() as a post_load callback, but that's a bigger
project for another day.

This is bugfix, and should be considered for the 2.2 branch.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Message-id: 1417067290-20715-1-git-send-email-david@gibson.dropbear.id.au
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

virtio_net_handle_ctrl() and other functions that process control vq
request call iov_discard_front() which will shorten the iov. This will
lead unmapping in virtqueue_push() leaks mapping.

Fixes this by keeping the original iov untouched and using a temp variable
in those functions.

Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Message-id: 1417082643-23907-1-git-send-email-jasowang@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The commits:
 - 6a1fa9f5 (monitor: add del completion for peripheral device)
 - 66e56b13 (qdev: add qdev_build_hotpluggable_device_list helper)

cause a QEMU crash when trying to use HMP device_del auto-completion.
It can be easily reproduced by:
    <qemu-bin> -enable-kvm  ~/images/fedora.qcow2 -monitor stdio -device virtio-net-pci,id=vnet

    (qemu) device_del
    /home/mapfelba/git/upstream/qemu/hw/core/qdev.c:941:qdev_build_hotpluggable_device_list: Object 0x7f6ce04e4fe0 is not an instance of type device
    Aborted (core dumped)

The root cause is qdev_build_hotpluggable_device_list going recursively over
all peripherals and their children assuming all are devices. It doesn't work
since PCI devices have at least on child which is a memory region (bus master).

Solved by observing that all devices appear as direct children of
/machine/peripheral container. No need of going recursively
over all the children.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Reported-by: NGal Hammer <ghammer@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Message-id: 1417002601-20799-1-git-send-email-marcel.a@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In qemu_poll_ns(), when we convert an int64_t nanosecond timeout into
a struct timespec, we may accidentally run into overflow problems if
the timeout is very long. This happens because the tv_sec field is a
time_t, which is signed, so we might end up setting it to a negative
value by mistake. This will result in what was intended to be a
near-infinite timeout turning into an instantaneous timeout, and we'll
busy loop. Cap the maximum timeout at INT32_MAX seconds (about 68 years)
to avoid this problem.

This specifically manifested on ARM hosts as an extreme slowdown on
guest shutdown (when the guest reprogrammed the PL031 RTC to not
generate alarms using a very long timeout) but could happen on other
hosts and guests too.
Reported-by: NChristoffer Dall <christoffer.dall@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NFam Zheng <famz@redhat.com>
Message-id: 1416939705-1272-1-git-send-email-peter.maydell@linaro.org

The final 2.2 patches from me.

# gpg: Signature made Wed 26 Nov 2014 11:12:25 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  s390x/kvm: Fix compile error
  fw_cfg: fix boot order bug when dynamically modified via QOM
  -machine vmport=auto: Fix handling of VMWare ioport emulation for xen
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

commit a2b257d6 "memory: expose alignment used for allocating RAM
as MemoryRegion API" triggered a compile error on KVM/s390x.

Fix the prototype and the implementation of legacy_s390_alloc.

Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When we dynamically modify boot order, the length of
boot order will be changed, but we don't update
s->files->f[i].size with new length. This casuse
seabios read a wrong vale of qemu cfg file about
bootorder.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

c/s 9b23cfb7

or

c/s b154537a

moved the testing of xen_enabled() from pc_init1() to
pc_machine_initfn().

xen_enabled() does not return the correct value in
pc_machine_initfn().

Changed vmport from a bool to an enum.  Added the value "auto" to do
the old way.  Move check of xen_enabled() back to pc_init1().
Acked-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NDon Slutz <dslutz@verizon.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Ongoing discussions on how we are going to specify the console,
so tag the command as experiental so we can refine things in
the 2.3 development cycle.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1416923657-10614-1-git-send-email-armbru@redhat.com
[Spell out "not a stable API", and x- the QAPI schema, too]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NAmos Kong <akong@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

pc, pci, misc bugfixes

A bunch of bugfixes for 2.2.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 24 Nov 2014 18:59:47 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  pc: acpi: mark all possible CPUs as enabled in SRAT
  pcie: fix improper use of negative value
  pcie: fix typo in pcie_cap_deverr_init()
  target-i386: move generic memory hotplug methods to DSDTs
  acpi-build: mark RAM dirty on table update
  hw/pci: fix crash on shpc error flow
  pc: count in 1Gb hugepage alignment when sizing hotplug-memory container
  pc: explicitly check maxmem limit when adding DIMM
  pc: pc-dimm: use backend alignment during address auto allocation
  pc: align DIMM's address/size by backend's alignment value
  memory: expose alignment used for allocating RAM as MemoryRegion API
  pc: limit DIMM address and size to page aligned values
  pc: make pc_dimm_plug() more readble
  pc: kvm: check if KVM has free memory slots to avoid abort()
  qemu-char: fix tcp_get_fds
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If QEMU is started with  -numa ... Windows only notices that
CPU has been hot-added but it will not online such CPUs.

It's caused by the fact that possible CPUs are flagged as
not enabled in SRAT and Windows honoring that information
doesn't use corresponding CPU.

ACPI 5.0 Spec regarding to flag says:
"
Table 5-47 Local APIC Flags
...
Enabled: if zero, this processor is unusable, and the operating system
support will not attempt to use it.
"

Fix QEMU to adhere to spec and mark possible CPUs as enabled
in SRAT.

With that Windows onlines hot-added CPUs as expected.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Reported-by:
 https://bugs.launchpad.net/qemu/+bug/1393440Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This makes it simpler to keep the SSDT byte-for-byte identical for a
given machine type, which is a goal we want to have for 2.2 and newer
types.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

acpi build modifies internal FW CFG RAM on first access
but we forgot to mark it dirty.
If this RAM has been migrated already, it won't be
migrated again, returning corrupted tables to guest.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

If the pci bridge enters in error flow as part
of init process it will only delete the shpc mmio
subregion but not remove it from the properties list,
resulting in segmentation fault when the bridge runs
the exit function.

Example: add a pci bridge without specifing the chassis number:
    <qemu-bin> ... -device pci-bridge,id=p1
Result:
    (qemu) qemu-system-x86_64: -device pci-bridge,id=p1: Bridge chassis not specified. Each bridge is required to be assigned a unique chassis id > 0.
    qemu-system-x86_64: -device pci-bridge,id=p1: Device
    initialization failed.
    Segmentation fault (core dumped)

    if (child->class->unparent) {
    #0  0x00005555558d629b in object_finalize_child_property (obj=0x555556d2e830, name=0x555556d30630 "shpc-mmio[0]", opaque=0x555556a42fc8) at qom/object.c:1078
    #1  0x00005555558d4b1f in object_property_del_all (obj=0x555556d2e830) at qom/object.c:367
    #2  0x00005555558d4ca1 in object_finalize (data=0x555556d2e830) at qom/object.c:412
    #3  0x00005555558d55a1 in object_unref (obj=0x555556d2e830) at qom/object.c:720
    #4  0x000055555572c907 in qdev_device_add (opts=0x5555563544f0) at qdev-monitor.c:566
    #5  0x0000555555744f16 in device_init_func (opts=0x5555563544f0, opaque=0x0) at vl.c:2213
    #6  0x00005555559cf5f0 in qemu_opts_foreach (list=0x555555e0f8e0 <qemu_device_opts>, func=0x555555744efa <device_init_func>, opaque=0x0, abort_on_failure=1) at util/qemu-option.c:1057
    #7  0x000055555574a11b in main (argc=16, argv=0x7fffffffdde8, envp=0x7fffffffde70) at vl.c:423

Unparent the shpc mmio region as part of shpc cleanup.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NAmos Kong <akong@redhat.com>

if DIMMs with different size/alignment are interleaved
in creation order, it could lead to hotplug-memory
container fragmentation and following inability to use
all RAM upto maxmem.
For example:
    -m 4G,slots=3,maxmem=7G
    -object memory-backend-file,id=mem-1,size=256M,mem-path=/pagesize-2MB
    -device pc-dimm,id=mem1,memdev=mem-1
    -object memory-backend-file,id=mem-2,size=1G,mem-path=/pagesize-1GB
    -device pc-dimm,id=mem2,memdev=mem-2
    -object memory-backend-file,id=mem-3,size=256M,mem-path=/pagesize-2MB
    -device pc-dimm,id=mem3,memdev=mem-3

fragments hotplug-memory container and doesn't allow
to use 1GB hugepage backend to consume remainig 1Gb.

To ease managment factor count in max 1Gb alignment for
each memory slot when sizing hotplug-memory region so
that regadless of fragmentaion it would be possible to
add max aligned DIMM.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>