- 28 1月, 2017 1 次提交
-
-
由 Peter Lieven 提交于
nb_cls_shrunk in iscsi_allocmap_update can become -1 if the request starts and ends within the same cluster. This results in passing -1 to bitmap_set and bitmap_clear and they don't handle negative values properly. In the end this leads to data corruption. Fixes: e1123a3b Cc: qemu-stable@nongnu.org Signed-off-by: NPeter Lieven <pl@kamp.de> Message-Id: <1484579832-18589-1-git-send-email-pl@kamp.de> Reviewed-by: NFam Zheng <famz@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 04 1月, 2017 1 次提交
-
-
由 Stefan Hajnoczi 提交于
The new AioPollFn io_poll() argument to aio_set_fd_handler() and aio_set_event_handler() is used in the next patch. Keep this code change separate due to the number of files it touches. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-3-stefanha@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 22 11月, 2016 1 次提交
-
-
由 Eric Blake 提交于
Right now, the block layer rounds discard requests, so that individual drivers are able to assert that discard requests will never be unaligned. But there are some ISCSI devices that track and coalesce multiple unaligned requests, turning it into an actual discard if the requests eventually cover an entire page, which implies that it is better to always pass discard requests as low down the stack as possible. In isolation, this patch has no semantic effect, since the block layer currently never passes an unaligned request through. But the block layer already has code that silently ignores drivers that return -ENOTSUP for a discard request that cannot be honored (as well as drivers that return 0 even when nothing was done). But the next patch will update the block layer to fragment discard requests, so that clients are guaranteed that they are either dealing with an unaligned head or tail, or an aligned core, making it similar to the block layer semantics of write zero fragmentation. CC: qemu-stable@nongnu.org Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 24 10月, 2016 2 次提交
-
-
由 Roy Shterman 提交于
iSER is a new transport layer supported in Libiscsi, iSER provides a zero-copy RDMA capable interface that can improve performance. In order to use the new iSER transport one need to have RDMA supported HW and to choose iser as the protocol name in Libiscsi URI. For now iSER memory buffers are pre-allocated and pre-registered, hence in order to work with iSER from QEMU, one need to enable MEMLOCK attribute in the VM to be large enough for all iSER buffers and RDMA resources. Signed-off-by: NRoy Shterman <roysh@mellanox.com> Message-Id: <1476000896-18632-3-git-send-email-roysh@mellanox.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Roy Shterman 提交于
A new API to deploy zero-copy command submission. The new API takes I/O vectors list and number of I/O vectors to submit as input parameters when initiating the command. New API must be used if working with iSER transport option. Signed-off-by: NRoy Shterman <roysh@mellanox.com> Message-Id: <1476000896-18632-2-git-send-email-roysh@mellanox.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 07 10月, 2016 1 次提交
-
-
由 Paolo Bonzini 提交于
This simplifies bottom half handlers by removing calls to qemu_bh_delete and thus removing the need to stash the bottom half pointer in the opaque datum. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 23 9月, 2016 2 次提交
-
-
由 Fam Zheng 提交于
A number of different places across the code base use CONFIG_UUID. Some of them are soft dependency, some are not built if libuuid is not available, some come with dummy fallback, some throws runtime error. It is hard to maintain, and hard to reason for users. Since UUID is a simple standard with only a small number of operations, it is cleaner to have a central support in libqemuutil. This patch adds qemu_uuid_* functions that all uuid users in the code base can rely on. Except for qemu_uuid_generate which is new code, all other functions are just copy from existing fallbacks from other files. Note that qemu_uuid_parse is moved without updating the function signature to use QemuUUID, to keep this patch simple. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NJeff Cody <jcody@redhat.com> Message-Id: <1474432046-325-2-git-send-email-famz@redhat.com>
-
由 Eric Blake 提交于
When qemu uses iscsi devices in sg mode, iscsilun->block_size is left at 0. Prior to commits cf081fca and similar, when block limits were tracked in sectors, this did not matter: various block limits were just left at 0. But when we started scaling by block size, this caused SIGFPE. Then, in a later patch, commit a5b8dd2c added an assertion to bdrv_open_common() that request_alignment is always non-zero; which was not true for SG mode. Rather than relax that assertion, we can just provide a sane value (we don't know of any SG device with a block size smaller than qemu's default sizing of 512 bytes). One possible solution for SG mode is to just blindly skip ALL of iscsi_refresh_limits(), since we already short circuit so many other things in sg mode. But this patch takes a slightly more conservative approach, and merely guarantees that scaling will succeed, while still using multiples of the original size where possible. Resulting limits may still be zero in SG mode (that is, we mostly only fix block_size used as a denominator or which affect assertions, not all uses). Reported-by: NHolger Schranz <holger@fam-schranz.de> Signed-off-by: NEric Blake <eblake@redhat.com> CC: qemu-stable@nongnu.org Message-Id: <1473283640-15756-1-git-send-email-eblake@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 21 9月, 2016 1 次提交
-
-
由 Colin Lord 提交于
This commit moves the initialization of the QemuOptsList qemu_iscsi_opts struct out of block/iscsi.c in order to allow the iscsi module to be dynamically loaded. Signed-off-by: NColin Lord <clord@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Message-id: 1471008424-16465-2-git-send-email-clord@redhat.com Reviewed-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NMax Reitz <mreitz@redhat.com>
-
- 20 7月, 2016 2 次提交
-
-
由 Eric Blake 提交于
Another step towards killing off sector-based block APIs. Unlike write_zeroes, where we can be handed unaligned requests and must fail gracefully with -ENOTSUP for a fallback, we are guaranteed that discard requests are always aligned because the block layer already ignored unaligned head/tail. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-13-git-send-email-eblake@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Eric Blake 提交于
Now that the block layer honors max_request, we don't need to bother with an EINVAL on overlarge requests, but can instead assert that requests are well-behaved. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Acked-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1468607524-19021-7-git-send-email-eblake@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 19 7月, 2016 2 次提交
-
-
由 Peter Lieven 提交于
until now the allocation map was used only as a hint if a cluster is allocated or not. If a block was not allocated (or Qemu had no info about the allocation status) a get_block_status call was issued to check the allocation status and possibly avoid a subsequent read of unallocated sectors. If a block known to be allocated the get_block_status call was omitted. In the other case a get_block_status call was issued before every read to avoid the necessity for a consistent allocation map. To avoid the potential overhead of calling get_block_status for each and every read request this took only place for the bigger requests. This patch enhances this mechanism to cache the allocation status and avoid calling get_block_status for blocks where the allocation status has been queried before. This allows for bypassing the read request even for smaller requests and additionally omits calling get_block_status for known to be unallocated blocks. Signed-off-by: NPeter Lieven <pl@kamp.de> Message-Id: <1468831940-15556-3-git-send-email-pl@kamp.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Peter Lieven 提交于
when setting clusters as alloacted the boundaries have to be expanded. As Paolo pointed out the calculation of the number of clusters is wrong: Suppose cluster_sectors is 2, sector_num = 1, nb_sectors = 6: In the "mark allocated" case, you want to set 0..8, i.e. cluster_num=0, nb_clusters=4. 0--.--2--.--4--.--6--.--8 <--|_________________|--> (<--> = expanded) Instead you are setting nb_clusters=3, so that 6..8 is not marked. 0--.--2--.--4--.--6--.--8 <--|______________|!!! (! = wrong) Cc: qemu-stable@nongnu.org Reported-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NPeter Lieven <pl@kamp.de> Message-Id: <1468831940-15556-2-git-send-email-pl@kamp.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 13 7月, 2016 1 次提交
-
-
由 Paolo Bonzini 提交于
In practice the entry argument is always known at creation time, and it is confusing that sometimes qemu_coroutine_enter is used with a non-NULL argument to re-enter a coroutine (this happens in block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value at creation time, for consistency with e.g. aio_bh_new. Mostly done with the following semantic patch: @ entry1 @ expression entry, arg, co; @@ - co = qemu_coroutine_create(entry); + co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry2 @ expression entry, arg; identifier co; @@ - Coroutine *co = qemu_coroutine_create(entry); + Coroutine *co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry3 @ expression entry, arg; @@ - qemu_coroutine_enter(qemu_coroutine_create(entry), arg); + qemu_coroutine_enter(qemu_coroutine_create(entry, arg)); @ reentry @ expression co; @@ - qemu_coroutine_enter(co, NULL); + qemu_coroutine_enter(co); except for the aforementioned few places where the semantic patch stumbled (as expected) and for test_co_queue, which would otherwise produce an uninitialized variable warning. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 12 7月, 2016 1 次提交
-
-
由 Markus Armbruster 提交于
Tracked down with an ugly, brittle and probably buggy Perl script. Also move includes converted to <...> up so they get included before ours where that's obviously okay. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Tested-by: NEric Blake <eblake@redhat.com> Reviewed-by: NRichard Henderson <rth@twiddle.net>
-
- 05 7月, 2016 6 次提交
-
-
由 Eric Blake 提交于
Using int for values that are only used as booleans is confusing. While at it, rearrange a couple of members so that all the bools are contiguous. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Eric Blake 提交于
It makes more sense to have ALL block size limit constraints in the same struct. Improve the documentation while at it. Simplify a couple of conditionals, now that we have audited and documented that request_alignment is always non-zero. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Eric Blake 提交于
Sector-based limits are awkward to think about; in our on-going quest to move to byte-based interfaces, convert max_discard and discard_alignment. Rename them, using 'pdiscard' as an aid to track which remaining discard interfaces need conversion, and so that the compiler will help us catch the change in semantics across any rebased code. The BlockLimits type is now completely byte-based; and in iscsi.c, sector_limits_lun2qemu() is no longer needed. pdiscard_alignment is made unsigned (we use power-of-2 alignments as bitmasks, where unsigned is easier to think about) while leaving max_pdiscard signed (since we still have an 'int' interface); this is comparable to what commit cf081fca did for write zeroes limits. We may later want to make everything an unsigned 64-bit limit - but that requires a bigger code audit. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Eric Blake 提交于
Sector-based limits are awkward to think about; in our on-going quest to move to byte-based interfaces, convert max_transfer_length and opt_transfer_length. Rename them (dropping the _length suffix) so that the compiler will help us catch the change in semantics across any rebased code, and improve the documentation. Use unsigned values, so that we don't have to worry about negative values and so that bit-twiddling is easier; however, we are still constrained by 2^31 of signed int in most APIs. When a value comes from an external source (iscsi and raw-posix), sanitize the results to ensure that opt_transfer is a power of 2. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Eric Blake 提交于
We want to eventually stick request_alignment alongside other BlockLimits, but first, we must ensure it is populated at the same time as all other limits, rather than being a special case that is set only when a block is first opened. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Eric Blake 提交于
The function sector_limits_lun2qemu() returns a value in units of the block layer's 512-byte sector, and can be as large as 0x40000000, which is much larger than the block layer's inherent limit of BDRV_REQUEST_MAX_SECTORS. The block layer already handles '0' as a synonym to the inherent limit, and it is nicer to return this value than it is to calculate an arbitrary maximum, for two reasons: we want to ensure that the block layer continues to special-case '0' as 'no limit beyond the inherent limits'; and we want to be able to someday expand the block layer to allow 64-bit limits, where auditing for uses of BDRV_REQUEST_MAX_SECTORS will help us make sure we aren't artificially constraining iscsi to old block layer limits. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 29 6月, 2016 1 次提交
-
-
由 Peter Lieven 提交于
Commit 94d047a3 added an assertion the the request alignment check. This introduced 2 issues: a) A off-by-one error since a request of BDRV_REQUEST_MAX_SECTORS is actually allowed. b) The bdrv_get_block_status call in the read path to check the allocation status requests up to INT_MAX sectors which triggers the assertion. Fixes: 94d047a3Signed-off-by: NPeter Lieven <pl@kamp.de> Message-Id: <1466414680-18383-1-git-send-email-pl@kamp.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 08 6月, 2016 3 次提交
-
-
由 Eric Blake 提交于
Another step on our continuing quest to switch to byte-based interfaces. As this is the first byte-based iscsi interface, convert is_request_lun_aligned() into two versions, one for sectors and one for bytes. Also, change from outright -EINVAL failure on an unaligned request, to instead failing with -ENOTSUP to trigger a read-modify-write fallback, particularly since the block layer should be honoring bs->request_alignment to avoid -EINVAL on read/write requests. Signed-off-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Eric Blake 提交于
Another step towards removing sector-based interfaces: convert the maximum write and minimum alignment values from sectors to bytes. Rename the variables to let the compiler check that all users are converted to the new semantics. The maximum remains an int as long as BDRV_REQUEST_MAX_SECTORS is constrained by INT_MAX (this means that we can't even support a 2G write_zeroes, but just under it) - changing operation lengths to unsigned or to 64-bits is a much bigger audit, and debatable if we even want to do it (since at the core, a 32-bit platform will still have ssize_t as its underlying limit on write()). Meanwhile, alignment is changed to 'uint32_t', since it makes no sense to have an alignment larger than the maximum write, and less painful to use an unsigned type with well-defined behavior in bit operations than to have to worry about what happens if a driver mistakenly supplies a negative alignment. Add an assert that no one was trying to use sectors to get a write zeroes larger than 2G, and therefore that a later conversion to bytes won't be impacted by keeping the limit at 32 bits. Signed-off-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Eric Blake 提交于
If hardware does not advertise a minimum zero/discard alignment, we still want to guarantee that the block layer will align requests to our blocks, rather than the arbitrary 512-byte BDRV sector size. Signed-off-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 29 5月, 2016 1 次提交
-
-
由 Peter Lieven 提交于
at least in the path via virtio-blk the maximum size is not restricted. Cc: qemu-stable@nongnu.org Signed-off-by: NPeter Lieven <pl@kamp.de> Message-Id: <1464080368-29584-1-git-send-email-pl@kamp.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 23 5月, 2016 1 次提交
-
-
由 Vadim Rozenfeld 提交于
Signed-off-by: NVadim Rozenfeld <vrozenfe@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 12 5月, 2016 3 次提交
-
-
由 Eric Blake 提交于
The block layer has a couple of cases where it can lose Force Unit Access semantics when writing a large block of zeroes, such that the request returns before the zeroes have been guaranteed to land on underlying media. SCSI does not support FUA during WRITESAME(10/16); FUA is only supported if it falls back to WRITE(10/16). But where the underlying device is new enough to not need a fallback, it means that any upper layer request with FUA semantics was silently ignoring BDRV_REQ_FUA. Conversely, NBD has situations where it can support FUA but not ZERO_WRITE; when that happens, the generic block layer fallback to bdrv_driver_pwritev() (or the older bdrv_co_writev() in qemu 2.6) was losing the FUA flag. The problem of losing flags unrelated to ZERO_WRITE has been latent in bdrv_co_do_write_zeroes() since commit aa7bfbff, but back then, it did not matter because there was no FUA flag. It became observable when commit 93f5e6d8 paved the way for flags that can impact correctness, when we should have been using bdrv_co_writev_flags() with modified flags. Compare to commit 9eeb6dd1, which got flag manipulation right in bdrv_co_do_zero_pwritev(). Symptoms: I tested with qemu-io with default writethrough cache (which is supposed to use FUA semantics on every write), and targetted an NBD client connected to a server that intentionally did not advertise NBD_FLAG_SEND_FUA. When doing 'write 0 512', the NBD client sent two operations (NBD_CMD_WRITE then NBD_CMD_FLUSH) to get the fallback FUA semantics; but when doing 'write -z 0 512', the NBD client sent only NBD_CMD_WRITE. The fix is do to a cleanup bdrv_co_flush() at the end of the operation if any step in the middle relied on a BDS that does not natively support FUA for that step (note that we don't need to flush after every operation, if the operation is broken into chunks based on bounce-buffer sizing). Each BDS gains a new flag .supported_zero_flags, which parallels the use of .supported_write_flags but only when accessing a zero write operation (the flags MUST be different, because of SCSI having different semantics based on WRITE vs. WRITESAME; and also because BDRV_REQ_MAY_UNMAP only makes sense on zero writes). Also fix some documentation to describe -ENOTSUP semantics, particularly since iscsi depends on those semantics. Down the road, we may want to add a driver where its .bdrv_co_pwritev() honors all three of BDRV_REQ_FUA, BDRV_REQ_ZERO_WRITE, and BDRV_REQ_MAY_UNMAP, and advertise this via bs->supported_write_flags for blocks opened by that driver; such a driver should NOT supply .bdrv_co_write_zeroes nor .supported_zero_flags. But none of the drivers touched in this patch want to do that (the act of writing zeroes is different enough from normal writes to deserve a second callback). Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Acked-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Eric Blake 提交于
Pre-patch, .supported_write_flags lives at the driver level, which means we are blindly declaring that all block devices using a given driver will either equally support FUA, or that we need a fallback at the block layer. But there are drivers where FUA support is a per-block decision: the NBD block driver is dependent on the remote server advertising NBD_FLAG_SEND_FUA (and has fallback code to duplicate the flush that the block layer would do if NBD had not set .supported_write_flags); and the iscsi block driver is dependent on the mode sense bits advertised by the underlying device (and is currently silently ignoring FUA requests if the underlying device does not support FUA). The fix is to make supported flags as a per-BDS option, set during .bdrv_open(). This patch moves the variable and fixes NBD and iscsi to set it only conditionally; later patches will then further simplify the NBD driver to quit duplicating work done at the block layer, as well as tackle the fact that SCSI does not support FUA semantics on WRITESAME(10/16) but only on WRITE(10/16). Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Acked-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
This is a function that simply calls into the block driver for doing a write, providing the byte granularity interface we want to eventually have everywhere, and using whatever interface that driver supports. This one is a bit more interesting than the version for reads: It adds support for .bdrv_co_writev_flags() everywhere, so that drivers implementing this function can drop .bdrv_co_writev() now. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com>
-
- 30 3月, 2016 2 次提交
-
-
由 Kevin Wolf 提交于
This replaces the existing hack in the iscsi driver that sent the FUA bit in writethrough mode and ignored the following flush in order to optimise the number of roundtrips (see commit 73b5394e). Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
Whether a write cache is used or not is a decision that concerns the user (e.g. the guest device) rather than the backend. It was already logically part of the BB level as bdrv_move_feature_fields() always kept it on top of the BDS tree; with this patch, the core of it (the actual flag and the additional flushes) is also implemented there. Direct callers of bdrv_open() must pass BDRV_O_CACHE_WB now if bs doesn't have a BlockBackend attached. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
- 01 3月, 2016 1 次提交
-
-
由 Daniel P. Berrange 提交于
The iSCSI driver currently accepts the CHAP password in plain text as a block driver property. This change adds a new "password-secret" property that accepts the ID of a QCryptoSecret instance. $QEMU \ -object secret,id=sec0,filename=/home/berrange/example.pw \ -drive driver=iscsi,url=iscsi://example.com/target-foo/lun1,\ user=dan,password-secret=sec0 Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Message-id: 1453385961-10718-4-git-send-email-berrange@redhat.com Signed-off-by: NJeff Cody <jcody@redhat.com>
-
- 03 2月, 2016 2 次提交
-
-
由 Fam Zheng 提交于
Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NFam Zheng <famz@redhat.com> Message-id: 1453780743-16806-6-git-send-email-famz@redhat.com Signed-off-by: NMax Reitz <mreitz@redhat.com>
-
由 Fam Zheng 提交于
The added parameter can be used to return the BDS pointer which the valid offset is referring to. Its value should be ignored unless BDRV_BLOCK_OFFSET_VALID in ret is set. Until block drivers fill in the right value, let's clear it explicitly right before calling .bdrv_get_block_status. The "bs->file" condition in bdrv_co_get_block_status is kept now to keep iotest case 102 passing, and will be fixed once all drivers return the right file pointer. Signed-off-by: NFam Zheng <famz@redhat.com> Message-id: 1453780743-16806-2-git-send-email-famz@redhat.com Reviewed-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NMax Reitz <mreitz@redhat.com>
-
- 20 1月, 2016 1 次提交
-
-
由 Peter Maydell 提交于
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 16 1月, 2016 1 次提交
-
-
由 Zhu Lingshan 提交于
When play with Dell MD3000 target, for sure it is a TYPE_DISK, but readcapacity16 would fail. Then we find that readcapacity10 succeeded. It looks like the target just support readcapacity10 even through it is a TYPE_DISK or have some TYPE_ROM characteristics. This patch can give a chance to send readcapacity16 when readcapacity10 failed. This patch is not harmful to original pathes Signed-off-by: NZhu Lingshan <lszhu@suse.com> Message-Id: <1451359934-9236-1-git-send-email-lszhu@suse.com> [Don't fall through on UNIT ATTENTION. - Paolo] Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 11 1月, 2016 1 次提交
-
-
由 Zhu Lingshan 提交于
fix:The error message for readcapacity 16 incorrectly mentioned a readcapacity 10 failure, fixed the error message. Signed-off-by: NZhu Lingshan <lszhu@suse.com> Reviewed-by: NJohn Snow <jsnow@redhat.com> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
- 12 11月, 2015 2 次提交
-
-
由 Fam Zheng 提交于
Now the callback is not used any more, drop the field along with all implementations in block drivers, which are iscsi and raw. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Message-id: 1447064214-29930-8-git-send-email-famz@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
iscsi_ioctl emulates SG_GET_VERSION_NUM and SG_GET_SCSI_ID. Now that bdrv_ioctl() will be emulated with .bdrv_aio_ioctl, replicate the logic into iscsi_aio_ioctl to make them consistent. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Message-id: 1447064214-29930-5-git-send-email-famz@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-