This patch fills the DriveInfo->unit after hotplugging a scsi disk.
It makes a difference when auto-assigning a scsi id, where unit was
left filled with '-1' instead of the actual scsi id.

With this patch applied the the drive naming logic in drive_init() works
as good as it did in previous releases.  Which means it works fine with
a single scsi bus.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The PCI bus on x86 requires ACPI for hotplug support, thus disbling ACPI
also disables hotplug for the PCI bus.  This patch makes qemu check
whenever the PCI bus in question can handle hotplug before trying to add
devices.  This is needed because qdev will abort() on any attempt to
hotplug devices into a non-hotpluggable bus.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch renames pci_find_host_bus() to pci_find_root_bus()
as suggested by "Michael S. Tsirkin" <mst@redhat.com>.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch sorts out/enhances pci code to track pci bus topology
more accurately.
- Track host bus bridge with pci domain number. Although the
  current qemu implementation supports only pci domian 0 yet.
- Track pci bridge parent-child relationship.
When looking down from pci host bus for pci sub bus, be aware of
secondary bus/subordinate bus.
Thus pci configuration transaction is more accurately emulated.

This patch adds new member to PCIBus to track pci bus topology.
Since qdev already tracks down bus relationship, those new member
wouldn't be necessary.
However it would be addressed later because not all the pci device
isn't converted to qdev yet.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Errors are still directly printed, as we are only converting
regular output.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Changes:
 - create common scsi_hot_add function for adding a scsi disk to
   a adapter.
 - Add sanity checks.  You can't drive_add disks to the VGA any more.
 - Ignore the unit value calculated by drive_init, add a comment
   explaining why.  Review the patch to find the details ;)
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Explicitly add the drive to the bus of the newly created scsi adapter
instead of hoping that scsi_bus_legacy_handle_cmdline() picks it up
correctly.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Cleanup on unplug happens via qdev->exit() callback now.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Same as for -net except for:

- only tap, user, vde and socket types are supported
- the vlan parameter is not allowed
- the name parameter is not allowed but the id parameter is
required

Patchworks-ID: 35517
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35378
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

But do so only where it may actually fail.  Leave the rest for the
next commit.

Patchworks-ID: 35167
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Now that net_client_init() has no users, kill it off and rename
net_client_init_from_opts().

There is no further need for the old code in net_client_parse() either.
We use qemu_opts_parse() 'firstname' facitity for that. Instead, move
the special handling of the 'vmchannel' type there.

Simplify the vl.c code into merely call net_client_parse() for each
-net command line option and then calling net_init_clients() later
to iterate over the options and create the clients.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit 0148fde5.

As requested by Luiz.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It's qdev_create() specialized for PCI, so name it accordingly.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Monitor command "pci_add ADDR storage ..." does its work in
qemu_pci_hot_add_nic().  It called pci_create(..., ADDR) to create the
device.  That's wrong, because pci_create() terminates the program
when ADDR is invalid.

Use pci_get_bus_devfn() and pci_create_noinit() instead.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Allow adding unconnected host drives by specifying if=none like it is
possible with -drive.  They can be put in use with drive attributes,
like this:

  drive_add dummy if=none,id=mydisk,file=/some/disk.img
  device_add virtio-blk-pci,drive=mydisk

which is the monitor aequivalent to these command line switches:

  -drive if=none,id=mydisk,file=/some/disk.img
  -device virtio-blk-pci,drive=mydisk
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

move pci device lookup into the "case IF_SCSI" section, so we
can do something else for other interface types.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Changes:
  * drive_uninit() wants a DriveInfo now.
  * drive_uninit() also calls bdrv_delete(),
    so callers don't need to do that.
  * drive_uninit() calls are moved over to the ->exit()
    callbacks, destroy_bdrvs() is zapped.
  * setting bdrv->private is not needed any more as the
    only user (destroy_bdrvs) is gone.
  * usb-storage needs no drive_uninit, scsi-disk will
    handle that.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Switch over acpi-based PCI hotplug for pc over to the new
qdev-based pci hotplugging.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

pci_unregister_device is static now and hooked into Devicestate->exit.
qdev_free(pci_device) works now.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If the user issues one of the following commands to the Monitor:

pci_add pci_addr=auto nic model=None
pci_add pci_addr=auto nic model=?

QEMU will exit, because the function used to perform sanity
checks (qemu_check_nic_model_list()) exits on error.

This function is used by the startup code, where it makes
sense to exit on error, but in the Monitor it doesn't.

Changing qemu_check_nic_model_list() to not exit on error
is not possible though, as it's used by the board init
code (the PC one), where all board specific code must have
void return.

The way I've chosen to fix this was to introduce a new function
called pci_nic_supported(), which checks if the NIC is supported
and returns true or false accordingly.

The new function is used only by the Monitor, it performs the
necessary check and returns an error in case the NIC is not
supported, thus qemu_check_nic_model_list()'s exit is never trigged.

The following should be observed:

1. Only the specified NIC is checked, the default one is assumed
to be supported

2. The NIC query command (model=?) won't work with pci_add, the
right way to do this with the Monitor is to add a new command
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc9235,
f40d7537,
96555a96 and
3990d09a but the fixes were fragile.

Solution: Avoid the conflict entirely by renaming the functions and the
file. Revert the previous hacks.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* Add SCSIBus.
 * Add SCSIDeviceInfo, move device callbacks here.
 * add qdev/scsi helper functions.
 * convert drivers.

Adding scsi disks via -device works now, i.e. you can do:

 -drive id=sda,if=none,...
 -device lsi
 -device scsi-disk,drive=sda

legacy command lines (-drive if=scsi,...) continue to work.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit ports command handlers that receive three arguments to use
the new monitor's dictionary.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit ports command handlers that receive two arguments to use
the new monitor's dictionary.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit ports command handlers that receive one argument to use
the new monitor's dictionary.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Some functions exported to be used by the Monitor as command
handlers are also called in other places as regular functions.

When those functions got ported to use the Monitor dictionary
to pass argments, the callers will have to setup a dictionary
to be able to call them.

To avoid this problem, this commit add wrappers to those functions,
so that we change the wrapper to accept the dictionary, letting
the current functions as is.

The following wrappers are being added:

- do_help_cmd()
- do_pci_device_hot_remove()
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Suppress the following compiler warning emitted by at least gcc version 4.2.1 (SUSE Linux)
and gcc version 3.4.5 (mingw32 special):

hw/pci-hotplug.c: In function 'pci_device_hot_add':
hw/pci-hotplug.c:102: warning: 'dinfo' may be used uninitialized in this function
hw/pci-hotplug.c:102: note: 'dinfo' was declared here
Signed-off-by: NSebastian Herbszt <herbszt@gmx.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

First user of the new drive property.  With this patch applied host
and guest config can be specified separately, like this:

  -drive if=none,id=disk1,file=/path/to/disk.img
  -device virtio-blk-pci,drive=disk1

You can set any property for virtio-blk-pci now.  You can set the pci
address via addr=.  You can switch the device into 0.10 compat mode
using class=0x0180.  As this is per device you can have one 0.10 and one
0.11 virtio block device in a single virtual machine.

Old syntax continues to work.  Internally it does the same as the two
lines above though.  One side effect this has is a different
initialization order, which might result in a different pci address
being assigned by default.

Long term plan here is to have this working for all block devices, i.e.
once all scsi is properly qdev-ified you will be able to do something
like this:

  -drive if=none,id=sda,file=/path/to/disk.img
  -device lsi,id=lsi,addr=<pciaddr>
  -device scsi-disk,drive=sda,bus=lsi.0,lun=<n>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

First step cleaning up the drives handling.  This one does nothing but
removing drives_table[], still it became seriously big.

drive_get_index() is gone and is replaced by drives_get() which hands
out DriveInfo pointers instead of a table index.  This needs adaption in
*tons* of places all over.

The drives are now maintained as linked list.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The "pci_addr=" prefix currently required by pci_add/remove and
drive_add has no practical use. Drop it, but still silently accept it
for backward compatibility.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Make drive_init() accept addr=, put the value into struct DriveInfo.
Use it in all the places that create virtio-blk-pci devices:
pc_init1(), bamboo_init(), mpc8544ds_init().

Don't support addr= in third argument of monitor command pci_add and
second argument of drive_add, because that clashes with their first
arguments.  Admittedly unelegant.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Simply pass the PCI address through qemu_pci_hot_add_nic() to
pci_nic_init() and through qemu_pci_hot_add_storage() to pci_create().

Before, pci_device_hot_add() passed along the PCI bus to use, and
ignored any user-specified slot.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Make net_client_init() accept addr=, put the value into struct
NICinfo.  Use it in pci_nic_init(), and remove arguments bus and
devfn.

Don't support addr= in third argument of monitor command pci_add,
because that clashes with its first argument.  Admittedly unelegant.

Machines "malta" and "r2d" have a default NIC with a well-known PCI
address.  Deal with that the same way as the NIC model: make
pci_nic_init() take an optional default to be used when the user
doesn't specify one.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

qemu_pci_hot_add_storage() runs qdev_init() twice.  Broken in commit
07e3af9a "Virtio-blk qdev conversion".
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

As host network devices can also be instantiated via the monitor, errors
should then be reported to the related monitor instead of stderr. This
requires larger refactoring, so this patch starts small with introducing
a helper to catch both cases and convert net_client_init as well as
net_slirp_redir.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMark McLoughlin <markmc@redhat.com>