- 10 4月, 2010 9 次提交
-
-
由 Juergen Lock 提交于
V2 that uses endaddr = end-of-guest-address-space if !h2g_valid(endaddr) after I found out that indeed works; and also disables the FreeBSD 6.x /compat/linux/proc/self/maps fallback because it can return partial lines if (at least I think that's the reason) the mappings change between subsequent read() calls. Signed-off-by: NJuergen Lock <nox@jelal.kn-bremen.de> Acked-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Daniel P. Berrange 提交于
The code processing incoming & sending outgoing messages from/to clients used embedded magic numbers for all message IDs. This made the code a little hard to follow. Add constants in the vnc.h header file for all message IDs and use them in the code Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Stefan Weil 提交于
In the previous patch which introduced fprintf_function to allow parameter checking by gcc some compiler warnings remained unfixed. These warnings are fixed here. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
With more files from outside the hw/ directory being placed into libhw, avoid the need to include hw/hw.h for the sake of targ_phys_addr_t. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 09 4月, 2010 13 次提交
-
-
由 Alexander Graf 提交于
Commit b305b9d7 made building of virtio-pci conditional and not enabled on S390x, because it collides with the S390 bus. Commit 087431d1 accidentially reverted that behavior, breaking S390x again. So here's a follow-up patch disabling building of virtio-pci on S390x again. This unbreaks the S390x target. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Stefan Weil 提交于
env->bcond must be printed using TARGET_FMT_ld. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Adam Lackorzynski 提交于
Signed-off-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Adam Lackorzynski 提交于
Signed-off-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Stefan Weil 提交于
With argument checking for cpu_fprintf, gcc throws this warning: CC i386-softmmu/helper.o cc1: warnings being treated as errors /qemu/ar7/target-i386/helper.c: In function ‘cpu_x86_dump_seg_cache’: /qemu/ar7/target-i386/helper.c:220: error: format not a string literal and no format arguments The code is correct, but current gcc versions don't detect this. Therefore the patch rewrites the statement to satisfy the compiler. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Thomas Monjalon 提交于
There was a pointer cast warning on Ubuntu since _FORTIFY_SOURCE has been reenabled. _FORTIFY_SOURCE had been disabled by 4a244704 and reenabled by 84958305. Signed-off-by: NThomas Monjalon <thomas@monjalon.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Lars Munch 提交于
Some drivers seems to access the reserved register in bank 0 so allow and ignore these accesses. Signed-off-by: NLars Munch <lars@segv.dk> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Lars Munch 提交于
this fixes the smc91c111 emulation which has been broken for gumstix and mainstone and maybe others since the "MMIO callback interface changes" 8da3ff18 was commited. Signed-off-by: NLars Munch <lars@segv.dk> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Samuel Thibault 提交于
Add a destroy hook for the baum character device, to properly close the BrlAPI connection. Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Juha Riihimäki 提交于
Signed-Off-By: NRiku Voipio <riku.voipio@nokia.com> Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Riku Voipio 提交于
Signed-off-By: NRiku Voipio <riku.voipio@nokia.com> Signed-off-By: NJuha Riihimäki <juha.riihimaki@nokia.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Filip Navara 提交于
Signed-Off-By: NRiku Voipio <riku.voipio@nokia.com> Signed-off-by: NFilip Navara <filip.navara@gmail.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 08 4月, 2010 11 次提交
-
-
由 Richard Henderson 提交于
PA-RISC uses procedure descriptors. We'd need to emit a call to the millicode routine $$dyncall. However, this situation doesn't actually arise, since we always have the descriptor available at TCG code generation time. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Handle the output log part overlapping the input high parts. Also, improve sub2 to handle some constants the second input low part. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Delete inline functions from tcg-target.h that don't need to be there, move the others to tcg-target.c. Add 'Z', 'I', 'J' constraints for 0, signed 11-bit, and signed 5-bit respectively. Add GUEST_BASE support similar to ppc64, with the value stored in a register. Add missing registers to reg_alloc_order. Add support for 12-bit branch relocations. Add functions for synthetic operations: addi, mtctl, dep, shd, vshd, ori, andi, shifts, rotates, multiply, branches, setcond. Split out TLB reads from qemu_ld and qemu_st; fix argument loading for tlb external calls. Generate the prologue. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Gerd Hoffmann 提交于
The bochs vbe interface got a new register a while back, which specifies the linear framebuffer size in 64k units. This patch adds support for the new register to qemu. With this patch applied vgabios 0.6c works with qemu. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Naphtali Sprei 提交于
Signed-off-by: NNaphtali Sprei <nsprei@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Yoshiaki Tamura 提交于
Replaces direct phys_ram_dirty access with wrapper functions to prevent direct access to the phys_ram_dirty bitmap. Signed-off-by: NYoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp> Signed-off-by: NOHMURA Kei <ohmura.kei@lab.ntt.co.jp> Reviewed-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Yoshiaki Tamura 提交于
Adds wrapper functions to prevent direct access to the phys_ram_dirty bitmap. Signed-off-by: NYoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp> Signed-off-by: NOHMURA Kei <ohmura.kei@lab.ntt.co.jp> Reviewed-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Lars Munch 提交于
This patch fixes few resource leaks in the iwmmxt disassemble. Signed-off-by: NLars Munch <lars@segv.dk> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 07 4月, 2010 2 次提交
-
-
由 malc 提交于
Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Paolo Bonzini 提交于
> Hello, > > d6f4ade2 (disentangle tcg and deadline calculation, 2010-03-10) > introduces following regression(s): > > 100% cpu utilization when QEMU is invoked like: > qemu -S -s ... > > ditto when gdb takes control over the session via gdb-stub > (i.e. the breakpoint is hit or C-c is pressed inside gdb to > interrupt the attached qemu instance) The bug is that env->stopped is not really as comprehensive as it seems to be (and cpu_has_work thinks); it is only valid with iothread basically, and even then it is cleared by reset and it is not set when starting qemu with -S. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Cc: malc <av1474@comtv.ru> Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 06 4月, 2010 5 次提交
-
-
由 malc 提交于
Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 malc 提交于
Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Paul Brook 提交于
Convert remaining OHCI devices to QDEV interface. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
由 Paul Brook 提交于
Only include hw/loader.h from target-arm/helper.c when building for system emulation. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
由 Paul Brook 提交于
Move ARMv7-M PC/SP initialization to the CPU reset routine. Add a board reset routine to call this. Also load values directly from ROM as images have not been copied yet. Avoid clearing the NVIC pointer on cpu reset. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-