提交 e305a165 编写于 作者: M Marc-André Lureau

portio: keep references on portio

The isa_register_portio_list() function allocates ioports
data/state. Let's keep the reference to this data on some owner.  This
isn't enough to fix leaks, but at least, ASAN stops complaining of
direct leaks. Further cleanup would require calling
portio_list_del/destroy().
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
上级 bd794065
......@@ -60,6 +60,8 @@ typedef struct GUSState {
int64_t last_ticks;
qemu_irq pic;
IsaDma *isa_dma;
PortioList portio_list1;
PortioList portio_list2;
} GUSState;
static uint32_t gus_readb(void *opaque, uint32_t nport)
......@@ -265,8 +267,9 @@ static void gus_realizefn (DeviceState *dev, Error **errp)
s->samples = AUD_get_buffer_size_out (s->voice) >> s->shift;
s->mixbuf = g_malloc0 (s->samples << s->shift);
isa_register_portio_list (d, s->port, gus_portio_list1, s, "gus");
isa_register_portio_list (d, (s->port + 0x100) & 0xf00,
isa_register_portio_list(d, &s->portio_list1, s->port,
gus_portio_list1, s, "gus");
isa_register_portio_list(d, &s->portio_list2, (s->port + 0x100) & 0xf00,
gus_portio_list2, s, "gus");
s->isa_dma = isa_get_dma(isa_bus_from_device(d), s->emu.gusdma);
......
......@@ -106,6 +106,7 @@ typedef struct SB16State {
/* mixer state */
int mixer_nreg;
uint8_t mixer_regs[256];
PortioList portio_list;
} SB16State;
static void SB_audio_callback (void *opaque, int free);
......@@ -1378,7 +1379,8 @@ static void sb16_realizefn (DeviceState *dev, Error **errp)
dolog ("warning: Could not create auxiliary timer\n");
}
isa_register_portio_list (isadev, s->port, sb16_ioport_list, s, "sb16");
isa_register_portio_list(isadev, &s->portio_list, s->port,
sb16_ioport_list, s, "sb16");
s->isa_hdma = isa_get_dma(isa_bus_from_device(isadev), s->hdma);
k = ISADMA_GET_CLASS(s->isa_hdma);
......
......@@ -692,6 +692,7 @@ struct FDCtrl {
/* Timers state */
uint8_t timer0;
uint8_t timer1;
PortioList portio_list;
};
static FloppyDriveType get_fallback_drive_type(FDrive *drv)
......@@ -2495,7 +2496,8 @@ static void isabus_fdc_realize(DeviceState *dev, Error **errp)
FDCtrl *fdctrl = &isa->state;
Error *err = NULL;
isa_register_portio_list(isadev, isa->iobase, fdc_portio_list, fdctrl,
isa_register_portio_list(isadev, &fdctrl->portio_list,
isa->iobase, fdc_portio_list, fdctrl,
"fdc");
isa_init_irq(isadev, &fdctrl->irq, isa->irq);
......
......@@ -80,6 +80,7 @@ typedef struct ParallelState {
uint32_t last_read_offset; /* For debugging */
/* Memory-mapped interface */
int it_shift;
PortioList portio_list;
} ParallelState;
#define TYPE_ISA_PARALLEL "isa-parallel"
......@@ -532,7 +533,7 @@ static void parallel_isa_realizefn(DeviceState *dev, Error **errp)
s->status = dummy;
}
isa_register_portio_list(isadev, base,
isa_register_portio_list(isadev, &s->portio_list, base,
(s->hw_driver
? &isa_parallel_portio_hw_list[0]
: &isa_parallel_portio_sw_list[0]),
......
......@@ -39,6 +39,8 @@ typedef struct ISAVGAState {
ISADevice parent_obj;
struct VGACommonState state;
PortioList portio_vga;
PortioList portio_vbe;
} ISAVGAState;
static void vga_isa_reset(DeviceState *dev)
......@@ -60,9 +62,11 @@ static void vga_isa_realizefn(DeviceState *dev, Error **errp)
vga_common_init(s, OBJECT(dev), true);
s->legacy_address_space = isa_address_space(isadev);
vga_io_memory = vga_init_io(s, OBJECT(dev), &vga_ports, &vbe_ports);
isa_register_portio_list(isadev, 0x3b0, vga_ports, s, "vga");
isa_register_portio_list(isadev, &d->portio_vga,
0x3b0, vga_ports, s, "vga");
if (vbe_ports) {
isa_register_portio_list(isadev, 0x1ce, vbe_ports, s, "vbe");
isa_register_portio_list(isadev, &d->portio_vbe,
0x1ce, vbe_ports, s, "vbe");
}
memory_region_add_subregion_overlap(isa_address_space(isadev),
0x000a0000,
......
......@@ -553,10 +553,12 @@ static void i8257_realize(DeviceState *dev, Error **errp)
memory_region_add_subregion(isa_address_space_io(isa),
d->base, &d->channel_io);
isa_register_portio_list(isa, d->page_base, page_portio_list, d,
isa_register_portio_list(isa, &d->portio_page,
d->page_base, page_portio_list, d,
"dma-page");
if (d->pageh_base >= 0) {
isa_register_portio_list(isa, d->pageh_base, pageh_portio_list, d,
isa_register_portio_list(isa, &d->portio_pageh,
d->pageh_base, pageh_portio_list, d,
"dma-pageh");
}
......
......@@ -2619,10 +2619,12 @@ void ide_init_ioport(IDEBus *bus, ISADevice *dev, int iobase, int iobase2)
{
/* ??? Assume only ISA and PCI configurations, and that the PCI-ISA
bridge has been setup properly to always register with ISA. */
isa_register_portio_list(dev, iobase, ide_portio_list, bus, "ide");
isa_register_portio_list(dev, &bus->portio_list,
iobase, ide_portio_list, bus, "ide");
if (iobase2) {
isa_register_portio_list(dev, iobase2, ide_portio2_list, bus, "ide");
isa_register_portio_list(dev, &bus->portio2_list,
iobase2, ide_portio2_list, bus, "ide");
}
}
......
......@@ -131,24 +131,20 @@ void isa_register_ioport(ISADevice *dev, MemoryRegion *io, uint16_t start)
isa_init_ioport(dev, start);
}
void isa_register_portio_list(ISADevice *dev, uint16_t start,
void isa_register_portio_list(ISADevice *dev,
PortioList *piolist, uint16_t start,
const MemoryRegionPortio *pio_start,
void *opaque, const char *name)
{
PortioList piolist;
assert(piolist && !piolist->owner);
/* START is how we should treat DEV, regardless of the actual
contents of the portio array. This is how the old code
actually handled e.g. the FDC device. */
isa_init_ioport(dev, start);
/* FIXME: the device should store created PortioList in its state. Note
that DEV can be NULL here and that single device can register several
portio lists. Current implementation is leaking memory allocated
in portio_list_init. The leak is not critical because it happens only
at initialization time. */
portio_list_init(&piolist, OBJECT(dev), pio_start, opaque, name);
portio_list_add(&piolist, isabus->address_space_io, start);
portio_list_init(piolist, OBJECT(dev), pio_start, opaque, name);
portio_list_add(piolist, isabus->address_space_io, start);
}
static void isa_device_init(Object *obj)
......
......@@ -480,6 +480,8 @@ struct IDEBus {
uint8_t retry_unit;
int64_t retry_sector_num;
uint32_t retry_nsector;
PortioList portio_list;
PortioList portio2_list;
};
#define TYPE_IDE_DEVICE "ide-device"
......
......@@ -36,6 +36,8 @@ typedef struct I8257State {
QEMUBH *dma_bh;
bool dma_bh_scheduled;
int running;
PortioList portio_page;
PortioList portio_pageh;
} I8257State;
#endif
......@@ -134,12 +134,15 @@ void isa_register_ioport(ISADevice *dev, MemoryRegion *io, uint16_t start);
* device and use the legacy portio routines.
*
* @dev: the ISADevice against which these are registered; may be NULL.
* @piolist: the PortioList associated with the io ports
* @start: the base I/O port against which the portio->offset is applied.
* @portio: the ports, sorted by offset.
* @opaque: passed into the portio callbacks.
* @name: passed into memory_region_init_io.
*/
void isa_register_portio_list(ISADevice *dev, uint16_t start,
void isa_register_portio_list(ISADevice *dev,
PortioList *piolist,
uint16_t start,
const MemoryRegionPortio *portio,
void *opaque, const char *name);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册