diff --git a/tests/tcg/i386/Makefile.softmmu-target b/tests/tcg/i386/Makefile.softmmu-target index e1d880f9b5ce4aa8ff7e7ac3e57040ac32511af2..0a4364868ce6f44f554fdc74ab422928c7e27b7c 100644 --- a/tests/tcg/i386/Makefile.softmmu-target +++ b/tests/tcg/i386/Makefile.softmmu-target @@ -14,6 +14,7 @@ CRT_OBJS=boot.o ifeq ($(TARGET_X86_64), y) CRT_PATH=$(X64_SYSTEM_SRC) +CFLAGS=-march=x86-64 LINK_SCRIPT=$(X64_SYSTEM_SRC)/kernel.ld LDFLAGS=-Wl,-T$(LINK_SCRIPT) -Wl,-melf_x86_64 else diff --git a/tests/tcg/x86_64/system/boot.S b/tests/tcg/x86_64/system/boot.S new file mode 100644 index 0000000000000000000000000000000000000000..205cfbd3982300a90c0110e91adec58f4db91eff --- /dev/null +++ b/tests/tcg/x86_64/system/boot.S @@ -0,0 +1,277 @@ +/* + * x86_64 boot and support code + * + * Copyright 2019 Linaro + * + * This work is licensed under the terms of the GNU GPL, version 3 or later. + * See the COPYING file in the top-level directory. + * + * Unlike the i386 version we instead use Xen's PVHVM booting header + * which should drop us automatically into 32 bit mode ready to go. I've + * nabbed bits of the Linux kernel setup to achieve this. + * + * SPDX-License-Identifier: GPL-3.0-or-later + */ + + .section .head + +#define ELFNOTE_START(name, type, flags) \ +.pushsection .note.name, flags,@note ; \ + .balign 4 ; \ + .long 2f - 1f /* namesz */ ; \ + .long 4484f - 3f /* descsz */ ; \ + .long type ; \ +1:.asciz #name ; \ +2:.balign 4 ; \ +3: + +#define ELFNOTE_END \ +4484:.balign 4 ; \ +.popsection ; + +#define ELFNOTE(name, type, desc) \ + ELFNOTE_START(name, type, "") \ + desc ; \ + ELFNOTE_END + +#define XEN_ELFNOTE_ENTRY 1 +#define XEN_ELFNOTE_HYPERCALL_PAGE 2 +#define XEN_ELFNOTE_VIRT_BASE 3 +#define XEN_ELFNOTE_PADDR_OFFSET 4 +#define XEN_ELFNOTE_PHYS32_ENTRY 18 + +#define __ASM_FORM(x) x +#define __ASM_FORM_RAW(x) x +#define __ASM_FORM_COMMA(x) x, +#define __ASM_SEL(a,b) __ASM_FORM(b) +#define __ASM_SEL_RAW(a,b) __ASM_FORM_RAW(b) +#define _ASM_PTR __ASM_SEL(.long, .quad) + + ELFNOTE(Xen, XEN_ELFNOTE_VIRT_BASE, _ASM_PTR 0x100000) + ELFNOTE(Xen, XEN_ELFNOTE_ENTRY, _ASM_PTR _start) + ELFNOTE(Xen, XEN_ELFNOTE_PHYS32_ENTRY, _ASM_PTR _start) /* entry == virtbase */ + ELFNOTE(Xen, XEN_ELFNOTE_PADDR_OFFSET, _ASM_PTR 0) + + /* + * Entry point for PVH guests. + * + * Xen ABI specifies the following register state when we come here: + * + * - `ebx`: contains the physical memory address where the loader has placed + * the boot start info structure. + * - `cr0`: bit 0 (PE) must be set. All the other writeable bits are cleared. + * - `cr4`: all bits are cleared. + * - `cs `: must be a 32-bit read/execute code segment with a base of ‘0’ + * and a limit of ‘0xFFFFFFFF’. The selector value is unspecified. + * - `ds`, `es`: must be a 32-bit read/write data segment with a base of + * ‘0’ and a limit of ‘0xFFFFFFFF’. The selector values are all + * unspecified. + * - `tr`: must be a 32-bit TSS (active) with a base of '0' and a limit + * of '0x67'. + * - `eflags`: bit 17 (VM) must be cleared. Bit 9 (IF) must be cleared. + * Bit 8 (TF) must be cleared. Other bits are all unspecified. + * + * All other processor registers and flag bits are unspecified. The OS is in + * charge of setting up it's own stack, GDT and IDT. + */ + .code32 + .section .text + +.global _start +_start: + cld + lgdt gdtr + + ljmp $0x8,$.Lloadcs +.Lloadcs: + mov $0x10,%eax + mov %eax,%ds + mov %eax,%es + mov %eax,%fs + mov %eax,%gs + mov %eax,%ss + + /* Enable PAE mode (bit 5). */ + mov %cr4, %eax + btsl $5, %eax + mov %eax, %cr4 + +#define MSR_EFER 0xc0000080 /* extended feature register */ + + /* Enable Long mode. */ + mov $MSR_EFER, %ecx + rdmsr + btsl $8, %eax + wrmsr + + /* Enable paging */ + mov $.Lpml4, %ecx + mov %ecx, %cr3 + + mov %cr0, %eax + btsl $31, %eax + mov %eax, %cr0 + + /* Jump to 64-bit mode. */ + lgdt gdtr64 + ljmp $0x8,$.Lenter64 + + .code64 + .section .text +.Lenter64: + + + // Setup stack ASAP + movq $stack_end,%rsp + + /* don't worry about stack frame, assume everthing is garbage when we return */ + call main + + /* output any non-zero result in eax to isa-debug-exit device */ + test %al, %al + jz 1f + out %ax, $0xf4 + +1: /* QEMU ACPI poweroff */ + mov $0x604,%edx + mov $0x2000,%eax + out %ax,%dx + hlt + jmp 1b + + /* + * Helper Functions + * + * x86_64 calling convention is rdi, rsi, rdx, rcx, r8, r9 + */ + + /* Output a single character to serial port */ + .global __sys_outc +__sys_outc: + pushq %rax + mov %rax, %rdx + out %al,$0xE9 + popq %rax + ret + + /* Interrupt Descriptor Table */ + + .section .data + .align 16 + +idt_00: .int 0, 0 +idt_01: .int 0, 0 +idt_02: .int 0, 0 +idt_03: .int 0, 0 +idt_04: .int 0, 0 +idt_05: .int 0, 0 +idt_06: .int 0, 0 /* intr_6_opcode, Invalid Opcode */ +idt_07: .int 0, 0 +idt_08: .int 0, 0 +idt_09: .int 0, 0 +idt_0A: .int 0, 0 +idt_0B: .int 0, 0 +idt_0C: .int 0, 0 +idt_0D: .int 0, 0 +idt_0E: .int 0, 0 +idt_0F: .int 0, 0 +idt_10: .int 0, 0 +idt_11: .int 0, 0 +idt_12: .int 0, 0 +idt_13: .int 0, 0 +idt_14: .int 0, 0 +idt_15: .int 0, 0 +idt_16: .int 0, 0 +idt_17: .int 0, 0 +idt_18: .int 0, 0 +idt_19: .int 0, 0 +idt_1A: .int 0, 0 +idt_1B: .int 0, 0 +idt_1C: .int 0, 0 +idt_1D: .int 0, 0 +idt_1E: .int 0, 0 +idt_1F: .int 0, 0 + + + /* + * Global Descriptor Table (GDT) + * + * This describes various memory areas (segments) through + * segment descriptors. In 32 bit mode each segment each + * segement is associated with segment registers which are + * implicitly (or explicitly) referenced depending on the + * instruction. However in 64 bit mode selectors are flat and + * segmented addressing isn't used. + */ +gdt: + .short 0 +gdtr: + .short gdt_en - gdt - 1 + .int gdt + + // Code cs: + .short 0xFFFF + .short 0 + .byte 0 + .byte 0x9b + .byte 0xCF + .byte 0 + + // Data ds:, ss:, es:, fs:, and gs: + .short 0xFFFF + .short 0 + .byte 0 + .byte 0x93 + .byte 0xCF + .byte 0 +gdt_en: + +gdt64: + .short 0 +gdtr64: + .short gdt64_en - gdt64 - 1 + .int gdt64 + + // Code + .short 0xFFFF + .short 0 + .byte 0 + .byte 0x9b + .byte 0xAF + .byte 0 + + // Data + .short 0xFFFF + .short 0 + .byte 0 + .byte 0x93 + .byte 0xCF + .byte 0 +gdt64_en: + + .section .bss + .align 16 + +stack: .space 65536 +stack_end: + + .section .data + +.align 4096 +.Lpd: +i = 0 + .rept 512 * 4 + .quad 0x1e7 | (i << 21) + i = i + 1 + .endr + +.align 4096 +.Lpdp: + .quad .Lpd + 7 + 0 * 4096 /* 0-1 GB */ + .quad .Lpd + 7 + 1 * 4096 /* 1-2 GB */ + .quad .Lpd + 7 + 2 * 4096 /* 2-3 GB */ + .quad .Lpd + 7 + 3 * 4096 /* 3-4 GB */ + +.align 4096 +.Lpml4: + .quad .Lpdp + 7 /* 0-512 GB */ diff --git a/tests/tcg/x86_64/system/kernel.ld b/tests/tcg/x86_64/system/kernel.ld new file mode 100644 index 0000000000000000000000000000000000000000..49c12b04ae12124bcff489aecc826f062fdb7f35 --- /dev/null +++ b/tests/tcg/x86_64/system/kernel.ld @@ -0,0 +1,33 @@ +PHDRS { + text PT_LOAD FLAGS(5); /* R_E */ + note PT_NOTE FLAGS(0); /* ___ */ +} + +SECTIONS { + . = 0x100000; + + .text : { + __load_st = .; + *(.head) + *(.text) + } :text + + .rodata : { + *(.rodata) + } :text + + /* Keep build ID and PVH notes in same section */ + .notes : { + *(.note.*) + } :note + + .data : { + *(.data) + __load_en = .; + } :text + + .bss : { + *(.bss) + __bss_en = .; + } +}