From ceee6da6cff11cea77ed2169a37d27cfc62a3c22 Mon Sep 17 00:00:00 2001
From: Hollis Blanchard <hollis@penguinppc.org>
Date: Wed, 4 Aug 2010 17:21:37 -0700
Subject: [PATCH] ppc4xx: load Bamboo kernel, initrd, and fdt at fixed
 addresses

We can't use the return value of load_uimage() for the kernel because it
can't account for BSS size, and the PowerPC kernel does not relocate
blobs before zeroing BSS.

Instead, we now load at the fixed addresses chosen by u-boot (the normal
firmware for the board).

Signed-off-by: Hollis Blanchard <hollis@penguinppc.org>
---
 hw/ppc440_bamboo.c | 39 ++++++++++++++++++---------------------
 1 file changed, 18 insertions(+), 21 deletions(-)

diff --git a/hw/ppc440_bamboo.c b/hw/ppc440_bamboo.c
index d471d5df77..34ddf45477 100644
--- a/hw/ppc440_bamboo.c
+++ b/hw/ppc440_bamboo.c
@@ -27,6 +27,11 @@
 
 #define BINARY_DEVICE_TREE_FILE "bamboo.dtb"
 
+/* from u-boot */
+#define KERNEL_ADDR  0x1000000
+#define FDT_ADDR     0x1800000
+#define RAMDISK_ADDR 0x1900000
+
 static int bamboo_load_device_tree(target_phys_addr_t addr,
                                      uint32_t ramsize,
                                      target_phys_addr_t initrd_base,
@@ -98,10 +103,8 @@ static void bamboo_init(ram_addr_t ram_size,
     uint64_t elf_lowaddr;
     target_phys_addr_t entry = 0;
     target_phys_addr_t loadaddr = 0;
-    target_long kernel_size = 0;
-    target_ulong initrd_base = 0;
     target_long initrd_size = 0;
-    target_ulong dt_base = 0;
+    int success;
     int i;
 
     /* Setup CPU. */
@@ -118,15 +121,15 @@ static void bamboo_init(ram_addr_t ram_size,
 
     /* Load kernel. */
     if (kernel_filename) {
-        kernel_size = load_uimage(kernel_filename, &entry, &loadaddr, NULL);
-        if (kernel_size < 0) {
-            kernel_size = load_elf(kernel_filename, NULL, NULL, &elf_entry,
-                                   &elf_lowaddr, NULL, 1, ELF_MACHINE, 0);
+        success = load_uimage(kernel_filename, &entry, &loadaddr, NULL);
+        if (success < 0) {
+            success = load_elf(kernel_filename, NULL, NULL, &elf_entry,
+                               &elf_lowaddr, NULL, 1, ELF_MACHINE, 0);
             entry = elf_entry;
             loadaddr = elf_lowaddr;
         }
         /* XXX try again as binary */
-        if (kernel_size < 0) {
+        if (success < 0) {
             fprintf(stderr, "qemu: could not load kernel '%s'\n",
                     kernel_filename);
             exit(1);
@@ -135,26 +138,20 @@ static void bamboo_init(ram_addr_t ram_size,
 
     /* Load initrd. */
     if (initrd_filename) {
-        initrd_base = kernel_size + loadaddr;
-        initrd_size = load_image_targphys(initrd_filename, initrd_base,
-                                          ram_size - initrd_base);
+        initrd_size = load_image_targphys(initrd_filename, RAMDISK_ADDR,
+                                          ram_size - RAMDISK_ADDR);
 
         if (initrd_size < 0) {
-            fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
-                    initrd_filename);
+            fprintf(stderr, "qemu: could not load ram disk '%s' at %x\n",
+                    initrd_filename, RAMDISK_ADDR);
             exit(1);
         }
     }
 
     /* If we're loading a kernel directly, we must load the device tree too. */
     if (kernel_filename) {
-        if (initrd_base)
-            dt_base = initrd_base + initrd_size;
-        else
-            dt_base = kernel_size + loadaddr;
-
-        if (bamboo_load_device_tree(dt_base, ram_size,
-                        initrd_base, initrd_size, kernel_cmdline) < 0) {
+        if (bamboo_load_device_tree(FDT_ADDR, ram_size, RAMDISK_ADDR,
+                                    initrd_size, kernel_cmdline) < 0) {
             fprintf(stderr, "couldn't load device tree\n");
             exit(1);
         }
@@ -163,7 +160,7 @@ static void bamboo_init(ram_addr_t ram_size,
 
         /* Set initial guest state. */
         env->gpr[1] = (16<<20) - 8;
-        env->gpr[3] = dt_base;
+        env->gpr[3] = FDT_ADDR;
         env->nip = entry;
         /* XXX we currently depend on KVM to create some initial TLB entries. */
     }
-- 
GitLab