提交 b87dcdd0 编写于 作者: P Peter Maydell

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

# gpg: Signature made Fri 14 Nov 2014 11:05:54 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  vmdk: Leave bdi intact if -ENOTSUP in vmdk_get_info
  block: Fix max nb_sectors in bdrv_make_zero
  ahci: factor out FIS decomposition from handle_cmd
  ahci: Check cmd_fis[1] more explicitly
  ahci: Reorder error cases in handle_cmd
  ahci: Fix FIS decomposition
  ahci: add is_ncq predicate helper
  ide: Correct handling of malformed/short PRDTs
  ahci: unify sglist preparation
  ide: repair PIO transfers for cases where nsector > 1
  ahci: Fix byte count regression for ATAPI/PIO
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
......@@ -2790,8 +2790,8 @@ int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
if (nb_sectors <= 0) {
return 0;
}
if (nb_sectors > INT_MAX) {
nb_sectors = INT_MAX;
if (nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
nb_sectors = INT_MAX / BDRV_SECTOR_SIZE;
}
ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
if (ret < 0) {
......
......@@ -2137,23 +2137,29 @@ static ImageInfoSpecific *vmdk_get_specific_info(BlockDriverState *bs)
return spec_info;
}
static bool vmdk_extents_type_eq(const VmdkExtent *a, const VmdkExtent *b)
{
return a->flat == b->flat &&
a->compressed == b->compressed &&
(a->flat || a->cluster_sectors == b->cluster_sectors);
}
static int vmdk_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
{
int i;
BDRVVmdkState *s = bs->opaque;
assert(s->num_extents);
bdi->needs_compressed_writes = s->extents[0].compressed;
if (!s->extents[0].flat) {
bdi->cluster_size = s->extents[0].cluster_sectors << BDRV_SECTOR_BITS;
}
/* See if we have multiple extents but they have different cases */
for (i = 1; i < s->num_extents; i++) {
if (bdi->needs_compressed_writes != s->extents[i].compressed ||
(bdi->cluster_size && bdi->cluster_size !=
s->extents[i].cluster_sectors << BDRV_SECTOR_BITS)) {
if (!vmdk_extents_type_eq(&s->extents[0], &s->extents[i])) {
return -ENOTSUP;
}
}
bdi->needs_compressed_writes = s->extents[0].compressed;
if (!s->extents[0].flat) {
bdi->cluster_size = s->extents[0].cluster_sectors << BDRV_SECTOR_BITS;
}
return 0;
}
......
......@@ -730,7 +730,8 @@ static int prdt_tbl_entry_size(const AHCI_SG *tbl)
return (le32_to_cpu(tbl->flags_size) & AHCI_PRDT_SIZE_MASK) + 1;
}
static int ahci_populate_sglist(AHCIDevice *ad, QEMUSGList *sglist, int offset)
static int ahci_populate_sglist(AHCIDevice *ad, QEMUSGList *sglist,
int32_t offset)
{
AHCICmdHdr *cmd = ad->cur_cmd;
uint32_t opts = le32_to_cpu(cmd->opts);
......@@ -741,13 +742,21 @@ static int ahci_populate_sglist(AHCIDevice *ad, QEMUSGList *sglist, int offset)
uint8_t *prdt;
int i;
int r = 0;
int sum = 0;
uint64_t sum = 0;
int off_idx = -1;
int off_pos = -1;
int64_t off_pos = -1;
int tbl_entry_size;
IDEBus *bus = &ad->port;
BusState *qbus = BUS(bus);
/*
* Note: AHCI PRDT can describe up to 256GiB. SATA/ATA only support
* transactions of up to 32MiB as of ATA8-ACS3 rev 1b, assuming a
* 512 byte sector size. We limit the PRDT in this implementation to
* a reasonably large 2GiB, which can accommodate the maximum transfer
* request for sector sizes up to 32K.
*/
if (!sglist_alloc_hint) {
DPRINTF(ad->port_no, "no sg list given by guest: 0x%08x\n", opts);
return -1;
......@@ -782,7 +791,7 @@ static int ahci_populate_sglist(AHCIDevice *ad, QEMUSGList *sglist, int offset)
}
if ((off_idx == -1) || (off_pos < 0) || (off_pos > tbl_entry_size)) {
DPRINTF(ad->port_no, "%s: Incorrect offset! "
"off_idx: %d, off_pos: %d\n",
"off_idx: %d, off_pos: %"PRId64"\n",
__func__, off_idx, off_pos);
r = -1;
goto out;
......@@ -797,6 +806,13 @@ static int ahci_populate_sglist(AHCIDevice *ad, QEMUSGList *sglist, int offset)
/* flags_size is zero-based */
qemu_sglist_add(sglist, le64_to_cpu(tbl[i].addr),
prdt_tbl_entry_size(&tbl[i]));
if (sglist->size > INT32_MAX) {
error_report("AHCI Physical Region Descriptor Table describes "
"more than 2 GiB.\n");
qemu_sglist_destroy(sglist);
r = -1;
goto out;
}
}
}
......@@ -838,6 +854,21 @@ static void ncq_cb(void *opaque, int ret)
ncq_tfs->used = 0;
}
static int is_ncq(uint8_t ata_cmd)
{
/* Based on SATA 3.2 section 13.6.3.2 */
switch (ata_cmd) {
case READ_FPDMA_QUEUED:
case WRITE_FPDMA_QUEUED:
case NCQ_NON_DATA:
case RECEIVE_FPDMA_QUEUED:
case SEND_FPDMA_QUEUED:
return 1;
default:
return 0;
}
}
static void process_ncq_command(AHCIState *s, int port, uint8_t *cmd_fis,
int slot)
{
......@@ -903,84 +934,40 @@ static void process_ncq_command(AHCIState *s, int port, uint8_t *cmd_fis,
ncq_cb, ncq_tfs);
break;
default:
DPRINTF(port, "error: tried to process non-NCQ command as NCQ\n");
if (is_ncq(cmd_fis[2])) {
DPRINTF(port,
"error: unsupported NCQ command (0x%02x) received\n",
cmd_fis[2]);
} else {
DPRINTF(port,
"error: tried to process non-NCQ command as NCQ\n");
}
qemu_sglist_destroy(&ncq_tfs->sglist);
break;
}
}
static int handle_cmd(AHCIState *s, int port, int slot)
static void handle_reg_h2d_fis(AHCIState *s, int port,
int slot, uint8_t *cmd_fis)
{
IDEState *ide_state;
uint32_t opts;
uint64_t tbl_addr;
AHCICmdHdr *cmd;
uint8_t *cmd_fis;
dma_addr_t cmd_len;
if (s->dev[port].port.ifs[0].status & (BUSY_STAT|DRQ_STAT)) {
/* Engine currently busy, try again later */
DPRINTF(port, "engine busy\n");
return -1;
}
cmd = &((AHCICmdHdr *)s->dev[port].lst)[slot];
if (!s->dev[port].lst) {
DPRINTF(port, "error: lst not given but cmd handled");
return -1;
}
/* remember current slot handle for later */
s->dev[port].cur_cmd = cmd;
opts = le32_to_cpu(cmd->opts);
tbl_addr = le64_to_cpu(cmd->tbl_addr);
cmd_len = 0x80;
cmd_fis = dma_memory_map(s->as, tbl_addr, &cmd_len,
DMA_DIRECTION_FROM_DEVICE);
if (!cmd_fis) {
DPRINTF(port, "error: guest passed us an invalid cmd fis\n");
return -1;
}
/* The device we are working for */
ide_state = &s->dev[port].port.ifs[0];
if (!ide_state->blk) {
DPRINTF(port, "error: guest accessed unused port");
goto out;
}
debug_print_fis(cmd_fis, 0x90);
//debug_print_fis(cmd_fis, (opts & AHCI_CMD_HDR_CMD_FIS_LEN) * 4);
IDEState *ide_state = &s->dev[port].port.ifs[0];
AHCICmdHdr *cmd = s->dev[port].cur_cmd;
uint32_t opts = le32_to_cpu(cmd->opts);
switch (cmd_fis[0]) {
case SATA_FIS_TYPE_REGISTER_H2D:
break;
default:
DPRINTF(port, "unknown command cmd_fis[0]=%02x cmd_fis[1]=%02x "
"cmd_fis[2]=%02x\n", cmd_fis[0], cmd_fis[1],
cmd_fis[2]);
goto out;
break;
if (cmd_fis[1] & 0x0F) {
DPRINTF(port, "Port Multiplier not supported."
" cmd_fis[0]=%02x cmd_fis[1]=%02x cmd_fis[2]=%02x\n",
cmd_fis[0], cmd_fis[1], cmd_fis[2]);
return;
}
switch (cmd_fis[1]) {
case SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER:
break;
case 0:
break;
default:
DPRINTF(port, "unknown command cmd_fis[0]=%02x cmd_fis[1]=%02x "
"cmd_fis[2]=%02x\n", cmd_fis[0], cmd_fis[1],
cmd_fis[2]);
goto out;
break;
if (cmd_fis[1] & 0x70) {
DPRINTF(port, "Reserved flags set in H2D Register FIS."
" cmd_fis[0]=%02x cmd_fis[1]=%02x cmd_fis[2]=%02x\n",
cmd_fis[0], cmd_fis[1], cmd_fis[2]);
return;
}
if (!(cmd_fis[1] & SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER)) {
switch (s->dev[port].port_state) {
case STATE_RUN:
if (cmd_fis[15] & ATA_SRST) {
......@@ -993,60 +980,44 @@ static int handle_cmd(AHCIState *s, int port, int slot)
}
break;
}
if (cmd_fis[1] == SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER) {
return;
}
/* Check for NCQ command */
if ((cmd_fis[2] == READ_FPDMA_QUEUED) ||
(cmd_fis[2] == WRITE_FPDMA_QUEUED)) {
if (is_ncq(cmd_fis[2])) {
process_ncq_command(s, port, cmd_fis, slot);
goto out;
}
/* Decompose the FIS */
ide_state->nsector = (int64_t)((cmd_fis[13] << 8) | cmd_fis[12]);
ide_state->feature = cmd_fis[3];
if (!ide_state->nsector) {
ide_state->nsector = 256;
return;
}
if (ide_state->drive_kind != IDE_CD) {
/*
* We set the sector depending on the sector defined in the FIS.
* Unfortunately, the spec isn't exactly obvious on this one.
/* Decompose the FIS:
* AHCI does not interpret FIS packets, it only forwards them.
* SATA 1.0 describes how to decode LBA28 and CHS FIS packets.
* Later specifications, e.g, SATA 3.2, describe LBA48 FIS packets.
*
* Apparently LBA48 commands set fis bytes 10,9,8,6,5,4 to the
* 48 bit sector number. ATA_CMD_READ_DMA_EXT is an example for
* such a command.
* ATA4 describes sector number for LBA28/CHS commands.
* ATA6 describes sector number for LBA48 commands.
* ATA8 deprecates CHS fully, describing only LBA28/48.
*
* Non-LBA48 commands however use 7[lower 4 bits],6,5,4 to define a
* 28-bit sector number. ATA_CMD_READ_DMA is an example for such
* a command.
*
* Since the spec doesn't explicitly state what each field should
* do, I simply assume non-used fields as reserved and OR everything
* together, independent of the command.
*/
ide_set_sector(ide_state, ((uint64_t)cmd_fis[10] << 40)
| ((uint64_t)cmd_fis[9] << 32)
/* This is used for LBA48 commands */
| ((uint64_t)cmd_fis[8] << 24)
/* This is used for non-LBA48 commands */
| ((uint64_t)(cmd_fis[7] & 0xf) << 24)
| ((uint64_t)cmd_fis[6] << 16)
| ((uint64_t)cmd_fis[5] << 8)
| cmd_fis[4]);
}
* We dutifully convert the FIS into IDE registers, and allow the
* core layer to interpret them as needed. */
ide_state->feature = cmd_fis[3];
ide_state->sector = cmd_fis[4]; /* LBA 7:0 */
ide_state->lcyl = cmd_fis[5]; /* LBA 15:8 */
ide_state->hcyl = cmd_fis[6]; /* LBA 23:16 */
ide_state->select = cmd_fis[7]; /* LBA 27:24 (LBA28) */
ide_state->hob_sector = cmd_fis[8]; /* LBA 31:24 */
ide_state->hob_lcyl = cmd_fis[9]; /* LBA 39:32 */
ide_state->hob_hcyl = cmd_fis[10]; /* LBA 47:40 */
ide_state->hob_feature = cmd_fis[11];
ide_state->nsector = (int64_t)((cmd_fis[13] << 8) | cmd_fis[12]);
/* 14, 16, 17, 18, 19: Reserved (SATA 1.0) */
/* 15: Only valid when UPDATE_COMMAND not set. */
/* Copy the ACMD field (ATAPI packet, if any) from the AHCI command
* table to ide_state->io_buffer
*/
* table to ide_state->io_buffer */
if (opts & AHCI_CMD_ATAPI) {
memcpy(ide_state->io_buffer, &cmd_fis[AHCI_COMMAND_TABLE_ACMD], 0x10);
ide_state->lcyl = 0x14;
ide_state->hcyl = 0xeb;
debug_print_fis(ide_state->io_buffer, 0x10);
ide_state->feature = IDE_FEATURE_DMA;
s->dev[port].done_atapi_packet = false;
/* XXX send PIO setup FIS */
}
......@@ -1058,6 +1029,62 @@ static int handle_cmd(AHCIState *s, int port, int slot)
/* We're ready to process the command in FIS byte 2. */
ide_exec_cmd(&s->dev[port].port, cmd_fis[2]);
}
static int handle_cmd(AHCIState *s, int port, int slot)
{
IDEState *ide_state;
uint64_t tbl_addr;
AHCICmdHdr *cmd;
uint8_t *cmd_fis;
dma_addr_t cmd_len;
if (s->dev[port].port.ifs[0].status & (BUSY_STAT|DRQ_STAT)) {
/* Engine currently busy, try again later */
DPRINTF(port, "engine busy\n");
return -1;
}
if (!s->dev[port].lst) {
DPRINTF(port, "error: lst not given but cmd handled");
return -1;
}
cmd = &((AHCICmdHdr *)s->dev[port].lst)[slot];
/* remember current slot handle for later */
s->dev[port].cur_cmd = cmd;
/* The device we are working for */
ide_state = &s->dev[port].port.ifs[0];
if (!ide_state->blk) {
DPRINTF(port, "error: guest accessed unused port");
return -1;
}
tbl_addr = le64_to_cpu(cmd->tbl_addr);
cmd_len = 0x80;
cmd_fis = dma_memory_map(s->as, tbl_addr, &cmd_len,
DMA_DIRECTION_FROM_DEVICE);
if (!cmd_fis) {
DPRINTF(port, "error: guest passed us an invalid cmd fis\n");
return -1;
} else if (cmd_len != 0x80) {
ahci_trigger_irq(s, &s->dev[port], PORT_IRQ_HBUS_ERR);
DPRINTF(port, "error: dma_memory_map failed: "
"(len(%02"PRIx64") != 0x80)\n",
cmd_len);
goto out;
}
debug_print_fis(cmd_fis, 0x80);
switch (cmd_fis[0]) {
case SATA_FIS_TYPE_REGISTER_H2D:
handle_reg_h2d_fis(s, port, slot, cmd_fis);
break;
default:
DPRINTF(port, "unknown command cmd_fis[0]=%02x cmd_fis[1]=%02x "
"cmd_fis[2]=%02x\n", cmd_fis[0], cmd_fis[1],
cmd_fis[2]);
break;
}
out:
......@@ -1089,10 +1116,11 @@ static void ahci_start_transfer(IDEDMA *dma)
if (is_atapi && !ad->done_atapi_packet) {
/* already prepopulated iobuffer */
ad->done_atapi_packet = true;
size = 0;
goto out;
}
if (!ahci_populate_sglist(ad, &s->sg, 0)) {
if (ahci_dma_prepare_buf(dma, is_write)) {
has_sglist = 1;
}
......@@ -1139,16 +1167,19 @@ static void ahci_start_dma(IDEDMA *dma, IDEState *s,
* Not currently invoked by PIO R/W chains,
* which invoke ahci_populate_sglist via ahci_start_transfer.
*/
static int ahci_dma_prepare_buf(IDEDMA *dma, int is_write)
static int32_t ahci_dma_prepare_buf(IDEDMA *dma, int is_write)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
IDEState *s = &ad->port.ifs[0];
ahci_populate_sglist(ad, &s->sg, 0);
if (ahci_populate_sglist(ad, &s->sg, s->io_buffer_offset) == -1) {
DPRINTF(ad->port_no, "ahci_dma_prepare_buf failed.\n");
return -1;
}
s->io_buffer_size = s->sg.size;
DPRINTF(ad->port_no, "len=%#x\n", s->io_buffer_size);
return s->io_buffer_size != 0;
return s->io_buffer_size;
}
/**
......
......@@ -186,6 +186,9 @@
#define READ_FPDMA_QUEUED 0x60
#define WRITE_FPDMA_QUEUED 0x61
#define NCQ_NON_DATA 0x63
#define RECEIVE_FPDMA_QUEUED 0x65
#define SEND_FPDMA_QUEUED 0x64
#define RES_FIS_DSFIS 0x00
#define RES_FIS_PSFIS 0x20
......
......@@ -592,6 +592,7 @@ static void ide_sector_read_cb(void *opaque, int ret)
ide_set_sector(s, ide_get_sector(s) + n);
s->nsector -= n;
s->io_buffer_offset += 512 * n;
}
void ide_sector_read(IDEState *s)
......@@ -730,10 +731,11 @@ void ide_dma_cb(void *opaque, int ret)
n = s->nsector;
s->io_buffer_index = 0;
s->io_buffer_size = n * 512;
if (s->bus->dma->ops->prepare_buf(s->bus->dma, ide_cmd_is_read(s)) == 0) {
if (s->bus->dma->ops->prepare_buf(s->bus->dma, ide_cmd_is_read(s)) < 512) {
/* The PRDs were too short. Reset the Active bit, but don't raise an
* interrupt. */
s->status = READY_STAT | SEEK_STAT;
dma_buf_commit(s, 0);
goto eot;
}
......@@ -832,6 +834,8 @@ static void ide_sector_write_cb(void *opaque, int ret)
n = s->req_nb_sectors;
}
s->nsector -= n;
s->io_buffer_offset += 512 * n;
if (s->nsector == 0) {
/* no more sectors to write */
ide_transfer_stop(s);
......@@ -1824,6 +1828,7 @@ void ide_exec_cmd(IDEBus *bus, uint32_t val)
s->status = READY_STAT | BUSY_STAT;
s->error = 0;
s->io_buffer_offset = 0;
complete = ide_cmd_table[val].handler(s, val);
if (complete) {
......@@ -2309,12 +2314,17 @@ static int ide_nop_int(IDEDMA *dma, int x)
return 0;
}
static int32_t ide_nop_int32(IDEDMA *dma, int x)
{
return 0;
}
static void ide_nop_restart(void *opaque, int x, RunState y)
{
}
static const IDEDMAOps ide_dma_nop_ops = {
.prepare_buf = ide_nop_int,
.prepare_buf = ide_nop_int32,
.rw_buf = ide_nop_int,
.set_unit = ide_nop_int,
.restart_cb = ide_nop_restart,
......
......@@ -322,6 +322,7 @@ typedef void EndTransferFunc(IDEState *);
typedef void DMAStartFunc(IDEDMA *, IDEState *, BlockCompletionFunc *);
typedef void DMAVoidFunc(IDEDMA *);
typedef int DMAIntFunc(IDEDMA *, int);
typedef int32_t DMAInt32Func(IDEDMA *, int);
typedef void DMAu32Func(IDEDMA *, uint32_t);
typedef void DMAStopFunc(IDEDMA *, bool);
typedef void DMARestartFunc(void *, int, RunState);
......@@ -385,7 +386,7 @@ struct IDEState {
uint8_t cdrom_changed;
int packet_transfer_size;
int elementary_transfer_size;
int io_buffer_index;
int32_t io_buffer_index;
int lba;
int cd_sector_size;
int atapi_dma; /* true if dma is requested for the packet cmd */
......@@ -394,8 +395,8 @@ struct IDEState {
struct iovec iov;
QEMUIOVector qiov;
/* ATA DMA state */
int io_buffer_offset;
int io_buffer_size;
int32_t io_buffer_offset;
int32_t io_buffer_size;
QEMUSGList sg;
/* PIO transfer handling */
int req_nb_sectors; /* number of sectors per interrupt */
......@@ -405,8 +406,8 @@ struct IDEState {
uint8_t *io_buffer;
/* PIO save/restore */
int32_t io_buffer_total_len;
int cur_io_buffer_offset;
int cur_io_buffer_len;
int32_t cur_io_buffer_offset;
int32_t cur_io_buffer_len;
uint8_t end_transfer_fn_idx;
QEMUTimer *sector_write_timer; /* only used for win2k install hack */
uint32_t irq_count; /* counts IRQs when using win2k install hack */
......@@ -430,7 +431,7 @@ struct IDEState {
struct IDEDMAOps {
DMAStartFunc *start_dma;
DMAVoidFunc *start_transfer;
DMAIntFunc *prepare_buf;
DMAInt32Func *prepare_buf;
DMAu32Func *commit_buf;
DMAIntFunc *rw_buf;
DMAIntFunc *set_unit;
......
......@@ -553,6 +553,11 @@ static int ide_nop_int(IDEDMA *dma, int x)
return 0;
}
static int32_t ide_nop_int32(IDEDMA *dma, int x)
{
return 0;
}
static void ide_nop_restart(void *opaque, int x, RunState y)
{
}
......@@ -569,7 +574,7 @@ static void ide_dbdma_start(IDEDMA *dma, IDEState *s,
static const IDEDMAOps dbdma_ops = {
.start_dma = ide_dbdma_start,
.prepare_buf = ide_nop_int,
.prepare_buf = ide_nop_int32,
.rw_buf = ide_nop_int,
.set_unit = ide_nop_int,
.restart_cb = ide_nop_restart,
......
......@@ -28,7 +28,7 @@
#include <hw/isa/isa.h>
#include "sysemu/block-backend.h"
#include "sysemu/dma.h"
#include "qemu/error-report.h"
#include <hw/ide/pci.h>
#define BMDMA_PAGE_SIZE 4096
......@@ -55,8 +55,11 @@ static void bmdma_start_dma(IDEDMA *dma, IDEState *s,
}
}
/* return 0 if buffer completed */
static int bmdma_prepare_buf(IDEDMA *dma, int is_write)
/**
* Return the number of bytes successfully prepared.
* -1 on error.
*/
static int32_t bmdma_prepare_buf(IDEDMA *dma, int is_write)
{
BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
IDEState *s = bmdma_active_if(bm);
......@@ -74,8 +77,9 @@ static int bmdma_prepare_buf(IDEDMA *dma, int is_write)
if (bm->cur_prd_len == 0) {
/* end of table (with a fail safe of one page) */
if (bm->cur_prd_last ||
(bm->cur_addr - bm->addr) >= BMDMA_PAGE_SIZE)
return s->io_buffer_size != 0;
(bm->cur_addr - bm->addr) >= BMDMA_PAGE_SIZE) {
return s->io_buffer_size;
}
pci_dma_read(pci_dev, bm->cur_addr, &prd, 8);
bm->cur_addr += 8;
prd.addr = le32_to_cpu(prd.addr);
......@@ -90,12 +94,23 @@ static int bmdma_prepare_buf(IDEDMA *dma, int is_write)
l = bm->cur_prd_len;
if (l > 0) {
qemu_sglist_add(&s->sg, bm->cur_prd_addr, l);
/* Note: We limit the max transfer to be 2GiB.
* This should accommodate the largest ATA transaction
* for LBA48 (65,536 sectors) and 32K sector sizes. */
if (s->sg.size > INT32_MAX) {
error_report("IDE: sglist describes more than 2GiB.\n");
break;
}
bm->cur_prd_addr += l;
bm->cur_prd_len -= l;
s->io_buffer_size += l;
}
}
return 1;
qemu_sglist_destroy(&s->sg);
s->io_buffer_size = 0;
return -1;
}
/* return 0 if buffer completed */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册