提交 b5dfdb08 编写于 作者: P Paolo Bonzini

hw: make virtio devices configurable via default-configs/

This is only half of the work, because the proxy devices (virtio-*-pci,
virtio-*-ccw, etc.) are still included unconditionally.  It is still a
move in the right direction.

Based-on: <20180522194943.24871-1-pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
上级 890b126e
......@@ -41,6 +41,7 @@ CONFIG_USB=y
CONFIG_USB_MUSB=y
CONFIG_USB_EHCI_SYSBUS=y
CONFIG_PLATFORM_BUS=y
CONFIG_VIRTIO_MMIO=y
CONFIG_ARM11MPCORE=y
CONFIG_A9MPCORE=y
......
......@@ -4,8 +4,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_ISA=y
CONFIG_ISA_BUS=y
CONFIG_I8259=y
CONFIG_VIRTIO_PCI=$(CONFIG_PCI)
CONFIG_VIRTIO=y
CONFIG_E1000_PCI=y
CONFIG_IDE_ISA=y
CONFIG_IDE_CMD646=y
......
......@@ -2,7 +2,7 @@ CONFIG_PCI=y
# For now, CONFIG_IDE_CORE requires ISA, so we enable it here
CONFIG_ISA_BUS=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO=y
include virtio.mak
CONFIG_USB_UHCI=y
CONFIG_USB_OHCI=y
CONFIG_USB_EHCI=y
......@@ -46,5 +46,3 @@ CONFIG_VGA=y
CONFIG_VGA_PCI=y
CONFIG_IVSHMEM_DEVICE=$(CONFIG_IVSHMEM)
CONFIG_ROCKER=y
CONFIG_VHOST_USER_SCSI=$(call land,$(CONFIG_VHOST_USER),$(CONFIG_LINUX))
CONFIG_VHOST_USER_BLK=$(call land,$(CONFIG_VHOST_USER),$(CONFIG_LINUX))
# Default configuration for riscv-softmmu
CONFIG_SERIAL=y
CONFIG_VIRTIO=y
CONFIG_SCSI=y
CONFIG_VIRTIO_MMIO=y
include virtio.mak
# Default configuration for riscv-softmmu
CONFIG_SERIAL=y
CONFIG_VIRTIO=y
CONFIG_SCSI=y
CONFIG_VIRTIO_MMIO=y
include virtio.mak
CONFIG_PCI=y
CONFIG_VIRTIO_PCI=$(CONFIG_PCI)
CONFIG_VHOST_USER_SCSI=$(call land,$(CONFIG_VHOST_USER),$(CONFIG_LINUX))
CONFIG_VHOST_USER_BLK=$(call land,$(CONFIG_VHOST_USER),$(CONFIG_LINUX))
CONFIG_SCSI=y
CONFIG_VIRTIO=y
include virtio.mak
CONFIG_SCLPCONSOLE=y
CONFIG_TERMINAL3270=y
CONFIG_S390_FLIC=y
......
CONFIG_VHOST_USER_SCSI=$(call land,$(CONFIG_VHOST_USER),$(CONFIG_LINUX))
CONFIG_VHOST_USER_BLK=$(call land,$(CONFIG_VHOST_USER),$(CONFIG_LINUX))
CONFIG_VIRTIO=y
CONFIG_VIRTIO_9P=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_BLK=y
CONFIG_VIRTIO_CRYPTO=y
CONFIG_VIRTIO_GPU=y
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_NET=y
CONFIG_VIRTIO_RNG=y
CONFIG_SCSI=y
CONFIG_VIRTIO_SCSI=y
CONFIG_VIRTIO_SERIAL=y
ifeq ($(call lor,$(CONFIG_VIRTIO_9P),$(CONFIG_XEN)),y)
common-obj-y = 9p.o 9p-util.o
common-obj-y += 9p-local.o 9p-xattr.o
common-obj-y += 9p-xattr-user.o 9p-posix-acl.o
......@@ -5,6 +6,7 @@ common-obj-y += coth.o cofs.o codir.o cofile.o
common-obj-y += coxattr.o 9p-synth.o
common-obj-$(CONFIG_OPEN_BY_HANDLE) += 9p-handle.o
common-obj-y += 9p-proxy.o
common-obj-$(CONFIG_XEN) += xen-9p-backend.o
endif
obj-$(CONFIG_VIRTIO) += virtio-9p-device.o
common-obj-$(CONFIG_XEN) += xen-9p-backend.o
obj-$(CONFIG_VIRTIO_9P) += virtio-9p-device.o
......@@ -11,8 +11,6 @@ common-obj-$(CONFIG_NVME_PCI) += nvme.o
obj-$(CONFIG_SH4) += tc58128.o
obj-$(CONFIG_VIRTIO) += virtio-blk.o
obj-$(CONFIG_VIRTIO) += dataplane/
ifeq ($(CONFIG_VIRTIO),y)
obj-$(CONFIG_VIRTIO_BLK) += virtio-blk.o
obj-$(CONFIG_VIRTIO_BLK) += dataplane/
obj-$(CONFIG_VHOST_USER_BLK) += vhost-user-blk.o
endif
......@@ -6,7 +6,7 @@ common-obj-$(CONFIG_PL011) += pl011.o
common-obj-$(CONFIG_SERIAL) += serial.o
common-obj-$(CONFIG_SERIAL_ISA) += serial-isa.o
common-obj-$(CONFIG_SERIAL_PCI) += serial-pci.o
common-obj-$(CONFIG_VIRTIO) += virtio-console.o
common-obj-$(CONFIG_VIRTIO_SERIAL) += virtio-console.o
common-obj-$(CONFIG_XILINX) += xilinx_uartlite.o
common-obj-$(CONFIG_XEN) += xen_console.o
common-obj-$(CONFIG_CADENCE) += cadence_uart.o
......
......@@ -36,8 +36,8 @@ obj-$(CONFIG_VGA) += vga.o
common-obj-$(CONFIG_QXL) += qxl.o qxl-logger.o qxl-render.o
obj-$(CONFIG_VIRTIO) += virtio-gpu.o virtio-gpu-3d.o
obj-$(CONFIG_VIRTIO_PCI) += virtio-gpu-pci.o
obj-$(CONFIG_VIRTIO_GPU) += virtio-gpu.o virtio-gpu-3d.o
obj-$(call land,$(CONFIG_VIRTIO_GPU),$(CONFIG_VIRTIO_PCI)) += virtio-gpu-pci.o
obj-$(CONFIG_VIRTIO_VGA) += virtio-vga.o
virtio-gpu.o-cflags := $(VIRGL_CFLAGS)
virtio-gpu.o-libs += $(VIRGL_LIBS)
......
......@@ -7,10 +7,10 @@ common-obj-y += ps2.o
common-obj-$(CONFIG_STELLARIS_INPUT) += stellaris_input.o
common-obj-$(CONFIG_TSC2005) += tsc2005.o
common-obj-$(CONFIG_VIRTIO) += virtio-input.o
common-obj-$(CONFIG_VIRTIO) += virtio-input-hid.o
common-obj-$(CONFIG_VIRTIO_INPUT) += virtio-input.o
common-obj-$(CONFIG_VIRTIO_INPUT) += virtio-input-hid.o
ifeq ($(CONFIG_LINUX),y)
common-obj-$(CONFIG_VIRTIO) += virtio-input-host.o
common-obj-$(CONFIG_VIRTIO_INPUT) += virtio-input-host.o
endif
obj-$(CONFIG_MILKYMIST) += milkymist-softusb.o
......
......@@ -36,7 +36,7 @@ obj-$(CONFIG_MILKYMIST) += milkymist-minimac2.o
obj-$(CONFIG_PSERIES) += spapr_llan.o
obj-$(CONFIG_XILINX_ETHLITE) += xilinx_ethlite.o
obj-$(CONFIG_VIRTIO) += virtio-net.o
obj-$(CONFIG_VIRTIO_NET) += virtio-net.o
obj-y += vhost_net.o
obj-$(CONFIG_ETSEC) += fsl_etsec/etsec.o fsl_etsec/registers.o \
......
......@@ -8,7 +8,7 @@ common-obj-$(CONFIG_ESP) += esp.o
common-obj-$(CONFIG_ESP_PCI) += esp-pci.o
obj-$(CONFIG_PSERIES) += spapr_vscsi.o
ifeq ($(CONFIG_VIRTIO),y)
ifeq ($(CONFIG_VIRTIO_SCSI),y)
obj-y += virtio-scsi.o virtio-scsi-dataplane.o
obj-$(CONFIG_VHOST_SCSI) += vhost-scsi-common.o vhost-scsi.o
obj-$(CONFIG_VHOST_USER_SCSI) += vhost-scsi-common.o vhost-user-scsi.o
......
ifeq ($(CONFIG_VIRTIO),y)
common-obj-y += virtio-rng.o
common-obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
common-obj-y += virtio-bus.o
common-obj-y += virtio-mmio.o
obj-y += virtio.o
common-obj-$(CONFIG_VIRTIO_RNG) += virtio-rng.o
common-obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
common-obj-$(CONFIG_VIRTIO_MMIO) += virtio-mmio.o
obj-$(CONFIG_VIRTIO_BALLOON) += virtio-balloon.o
obj-$(CONFIG_VIRTIO_CRYPTO) += virtio-crypto.o
obj-$(call land,$(CONFIG_VIRTIO_CRYPTO),$(CONFIG_VIRTIO_PCI)) += virtio-crypto-pci.o
obj-y += virtio.o virtio-balloon.o
obj-$(CONFIG_LINUX) += vhost.o vhost-backend.o vhost-user.o
obj-$(CONFIG_VHOST_VSOCK) += vhost-vsock.o
obj-y += virtio-crypto.o
obj-$(CONFIG_VIRTIO_PCI) += virtio-crypto-pci.o
endif
common-obj-$(call lnot,$(CONFIG_LINUX)) += vhost-stub.o
common-obj-$(call lnot,$(call land,$(CONFIG_VIRTIO),$(CONFIG_LINUX))) += vhost-stub.o
common-obj-$(CONFIG_ALL) += vhost-stub.o
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册