ppc/pnv: add a LPC controller

The LPC (Low Pin Count) interface on a POWER8 is made accessible to
the system through the ADU (XSCOM interface). This interface is part
of set of units connected together via a local OPB (On-Chip Peripheral
Bus) which act as a bridge between the ADU and the off chip LPC
endpoints, like external flash modules.

The most important units of this OPB are :
 - OPB Master: contains the ADU slave logic, a set of internal
   registers and the logic to control the OPB.
 - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of
   internal registers and the LPC HOST Controller to control the LPC
   interface.

Four address spaces are provided to the ADU :
 - LPC Bus Firmware Memory
 - LPC Bus Memory
 - LPC Bus I/O (ISA bus)
 - and the registers for the OPB Master and the LPC Host Controller

On POWER8, an intermediate hop is necessary to reach the OPB, through
a unit called the ECCB. OPB commands are simply mangled in ECCB write
commands.

On POWER9, the OPB master address space can be accessed via MMIO. The
logic is same but the code will be simpler as the XSCOM and ECCB hops
are not necessary anymore.

This version of the LPC controller model doesn't yet implement support
for the SerIRQ deserializer present in the Naples version of the chip
though some preliminary work is there.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: - updated for qemu-2.7
      - ported on latest PowerNV patchset
      - changed the XSCOM interface to fit new model
      - QOMified the model
      - moved the ISA hunks in another patch
      - removed printf logging
      - added a couple of UNIMP logging
      - rewrote commit log ]
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

hw/ppc/Makefile.objs

@@ -6,7 +6,7 @@ obj-$(CONFIG_PSERIES) += spapr_hcall.o spapr_iommu.o spapr_rtas.o
 obj-$(CONFIG_PSERIES) += spapr_pci.o spapr_rtc.o spapr_drc.o spapr_rng.o
 obj-$(CONFIG_PSERIES) += spapr_cpu_core.o
 # IBM PowerNV
-obj-$(CONFIG_POWERNV) += pnv.o pnv_xscom.o pnv_core.o
+obj-$(CONFIG_POWERNV) += pnv.o pnv_xscom.o pnv_core.o pnv_lpc.o
 ifeq ($(CONFIG_PCI)$(CONFIG_PSERIES)$(CONFIG_LINUX), yyy)
 obj-y += spapr_pci_vfio.o
 endif

hw/ppc/pnv.c

@@ -569,6 +569,9 @@ static void pnv_chip_init(Object *obj)
     PnvChipClass *pcc = PNV_CHIP_GET_CLASS(chip);
 
     chip->xscom_base = pcc->xscom_base;
+
+    object_initialize(&chip->lpc, sizeof(chip->lpc), TYPE_PNV_LPC);
+    object_property_add_child(obj, "lpc", OBJECT(&chip->lpc), NULL);
 }
 
 static void pnv_chip_realize(DeviceState *dev, Error **errp)
@@ -632,6 +635,11 @@ static void pnv_chip_realize(DeviceState *dev, Error **errp)
         i++;
     }
     g_free(typename);
+
+    /* Create LPC controller */
+    object_property_set_bool(OBJECT(&chip->lpc), true, "realized",
+                             &error_fatal);
+    pnv_xscom_add_subregion(chip, PNV_XSCOM_LPC_BASE, &chip->lpc.xscom_regs);
 }
 
 static Property pnv_chip_properties[] = {

hw/ppc/pnv_lpc.c

+/*
+ * QEMU PowerPC PowerNV LPC controller
+ *
+ * Copyright (c) 2016, IBM Corporation.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "sysemu/sysemu.h"
+#include "target-ppc/cpu.h"
+#include "qapi/error.h"
+#include "qemu/log.h"
+
+#include "hw/ppc/pnv_lpc.h"
+#include "hw/ppc/pnv.h"
+#include "hw/ppc/fdt.h"
+
+#include <libfdt.h>
+
+enum {
+    ECCB_CTL    = 0,
+    ECCB_RESET  = 1,
+    ECCB_STAT   = 2,
+    ECCB_DATA   = 3,
+};
+
+/* OPB Master LS registers */
+#define OPB_MASTER_LS_IRQ_STAT  0x50
+#define   OPB_MASTER_IRQ_LPC            0x00000800
+#define OPB_MASTER_LS_IRQ_MASK  0x54
+#define OPB_MASTER_LS_IRQ_POL   0x58
+#define OPB_MASTER_LS_IRQ_INPUT 0x5c
+
+/* LPC HC registers */
+#define LPC_HC_FW_SEG_IDSEL     0x24
+#define LPC_HC_FW_RD_ACC_SIZE   0x28
+#define   LPC_HC_FW_RD_1B               0x00000000
+#define   LPC_HC_FW_RD_2B               0x01000000
+#define   LPC_HC_FW_RD_4B               0x02000000
+#define   LPC_HC_FW_RD_16B              0x04000000
+#define   LPC_HC_FW_RD_128B             0x07000000
+#define LPC_HC_IRQSER_CTRL      0x30
+#define   LPC_HC_IRQSER_EN              0x80000000
+#define   LPC_HC_IRQSER_QMODE           0x40000000
+#define   LPC_HC_IRQSER_START_MASK      0x03000000
+#define   LPC_HC_IRQSER_START_4CLK      0x00000000
+#define   LPC_HC_IRQSER_START_6CLK      0x01000000
+#define   LPC_HC_IRQSER_START_8CLK      0x02000000
+#define LPC_HC_IRQMASK          0x34    /* same bit defs as LPC_HC_IRQSTAT */
+#define LPC_HC_IRQSTAT          0x38
+#define   LPC_HC_IRQ_SERIRQ0            0x80000000 /* all bits down to ... */
+#define   LPC_HC_IRQ_SERIRQ16           0x00008000 /* IRQ16=IOCHK#, IRQ2=SMI# */
+#define   LPC_HC_IRQ_SERIRQ_ALL         0xffff8000
+#define   LPC_HC_IRQ_LRESET             0x00000400
+#define   LPC_HC_IRQ_SYNC_ABNORM_ERR    0x00000080
+#define   LPC_HC_IRQ_SYNC_NORESP_ERR    0x00000040
+#define   LPC_HC_IRQ_SYNC_NORM_ERR      0x00000020
+#define   LPC_HC_IRQ_SYNC_TIMEOUT_ERR   0x00000010
+#define   LPC_HC_IRQ_SYNC_TARG_TAR_ERR  0x00000008
+#define   LPC_HC_IRQ_SYNC_BM_TAR_ERR    0x00000004
+#define   LPC_HC_IRQ_SYNC_BM0_REQ       0x00000002
+#define   LPC_HC_IRQ_SYNC_BM1_REQ       0x00000001
+#define LPC_HC_ERROR_ADDRESS    0x40
+
+#define LPC_OPB_SIZE            0x100000000ull
+
+#define ISA_IO_SIZE             0x00010000
+#define ISA_MEM_SIZE            0x10000000
+#define LPC_IO_OPB_ADDR         0xd0010000
+#define LPC_IO_OPB_SIZE         0x00010000
+#define LPC_MEM_OPB_ADDR        0xe0010000
+#define LPC_MEM_OPB_SIZE        0x10000000
+#define LPC_FW_OPB_ADDR         0xf0000000
+#define LPC_FW_OPB_SIZE         0x10000000
+
+#define LPC_OPB_REGS_OPB_ADDR   0xc0010000
+#define LPC_OPB_REGS_OPB_SIZE   0x00002000
+#define LPC_HC_REGS_OPB_ADDR    0xc0012000
+#define LPC_HC_REGS_OPB_SIZE    0x00001000
+
+
+/*
+ * TODO: the "primary" cell should only be added on chip 0. This is
+ * how skiboot chooses the default LPC controller on multichip
+ * systems.
+ *
+ * It would be easly done if we can change the populate() interface to
+ * replace the PnvXScomInterface parameter by a PnvChip one
+ */
+static int pnv_lpc_populate(PnvXScomInterface *dev, void *fdt, int xscom_offset)
+{
+    const char compat[] = "ibm,power8-lpc\0ibm,lpc";
+    char *name;
+    int offset;
+    uint32_t lpc_pcba = PNV_XSCOM_LPC_BASE;
+    uint32_t reg[] = {
+        cpu_to_be32(lpc_pcba),
+        cpu_to_be32(PNV_XSCOM_LPC_SIZE)
+    };
+
+    name = g_strdup_printf("isa@%x", lpc_pcba);
+    offset = fdt_add_subnode(fdt, xscom_offset, name);
+    _FDT(offset);
+    g_free(name);
+
+    _FDT((fdt_setprop(fdt, offset, "reg", reg, sizeof(reg))));
+    _FDT((fdt_setprop_cell(fdt, offset, "#address-cells", 2)));
+    _FDT((fdt_setprop_cell(fdt, offset, "#size-cells", 1)));
+    _FDT((fdt_setprop(fdt, offset, "primary", NULL, 0)));
+    _FDT((fdt_setprop(fdt, offset, "compatible", compat, sizeof(compat))));
+    return 0;
+}
+
+/*
+ * These read/write handlers of the OPB address space should be common
+ * with the P9 LPC Controller which uses direct MMIOs.
+ *
+ * TODO: rework to use address_space_stq() and address_space_ldq()
+ * instead.
+ */
+static bool opb_read(PnvLpcController *lpc, uint32_t addr, uint8_t *data,
+                     int sz)
+{
+    bool success;
+
+    /* XXX Handle access size limits and FW read caching here */
+    success = !address_space_rw(&lpc->opb_as, addr, MEMTXATTRS_UNSPECIFIED,
+                                data, sz, false);
+
+    return success;
+}
+
+static bool opb_write(PnvLpcController *lpc, uint32_t addr, uint8_t *data,
+                      int sz)
+{
+    bool success;
+
+    /* XXX Handle access size limits here */
+    success = !address_space_rw(&lpc->opb_as, addr, MEMTXATTRS_UNSPECIFIED,
+                                data, sz, true);
+
+    return success;
+}
+
+#define ECCB_CTL_READ           (1ull << (63 - 15))
+#define ECCB_CTL_SZ_LSH         (63 - 7)
+#define ECCB_CTL_SZ_MASK        (0xfull << ECCB_CTL_SZ_LSH)
+#define ECCB_CTL_ADDR_MASK      0xffffffffu;
+
+#define ECCB_STAT_OP_DONE       (1ull << (63 - 52))
+#define ECCB_STAT_OP_ERR        (1ull << (63 - 52))
+#define ECCB_STAT_RD_DATA_LSH   (63 - 37)
+#define ECCB_STAT_RD_DATA_MASK  (0xffffffff << ECCB_STAT_RD_DATA_LSH)
+
+static void pnv_lpc_do_eccb(PnvLpcController *lpc, uint64_t cmd)
+{
+    /* XXX Check for magic bits at the top, addr size etc... */
+    unsigned int sz = (cmd & ECCB_CTL_SZ_MASK) >> ECCB_CTL_SZ_LSH;
+    uint32_t opb_addr = cmd & ECCB_CTL_ADDR_MASK;
+    uint8_t data[4];
+    bool success;
+
+    if (cmd & ECCB_CTL_READ) {
+        success = opb_read(lpc, opb_addr, data, sz);
+        if (success) {
+            lpc->eccb_stat_reg = ECCB_STAT_OP_DONE |
+                    (((uint64_t)data[0]) << 24 |
+                     ((uint64_t)data[1]) << 16 |
+                     ((uint64_t)data[2]) <<  8 |
+                     ((uint64_t)data[3])) << ECCB_STAT_RD_DATA_LSH;
+        } else {
+            lpc->eccb_stat_reg = ECCB_STAT_OP_DONE |
+                    (0xffffffffull << ECCB_STAT_RD_DATA_LSH);
+        }
+    } else {
+        data[0] = lpc->eccb_data_reg >> 24;
+        data[1] = lpc->eccb_data_reg >> 16;
+        data[2] = lpc->eccb_data_reg >>  8;
+        data[3] = lpc->eccb_data_reg;
+
+        success = opb_write(lpc, opb_addr, data, sz);
+        lpc->eccb_stat_reg = ECCB_STAT_OP_DONE;
+    }
+    /* XXX Which error bit (if any) to signal OPB error ? */
+}
+
+static uint64_t pnv_lpc_xscom_read(void *opaque, hwaddr addr, unsigned size)
+{
+    PnvLpcController *lpc = PNV_LPC(opaque);
+    uint32_t offset = addr >> 3;
+    uint64_t val = 0;
+
+    switch (offset & 3) {
+    case ECCB_CTL:
+    case ECCB_RESET:
+        val = 0;
+        break;
+    case ECCB_STAT:
+        val = lpc->eccb_stat_reg;
+        lpc->eccb_stat_reg = 0;
+        break;
+    case ECCB_DATA:
+        val = ((uint64_t)lpc->eccb_data_reg) << 32;
+        break;
+    }
+    return val;
+}
+
+static void pnv_lpc_xscom_write(void *opaque, hwaddr addr,
+                                uint64_t val, unsigned size)
+{
+    PnvLpcController *lpc = PNV_LPC(opaque);
+    uint32_t offset = addr >> 3;
+
+    switch (offset & 3) {
+    case ECCB_CTL:
+        pnv_lpc_do_eccb(lpc, val);
+        break;
+    case ECCB_RESET:
+        /*  XXXX  */
+        break;
+    case ECCB_STAT:
+        break;
+    case ECCB_DATA:
+        lpc->eccb_data_reg = val >> 32;
+        break;
+    }
+}
+
+static const MemoryRegionOps pnv_lpc_xscom_ops = {
+    .read = pnv_lpc_xscom_read,
+    .write = pnv_lpc_xscom_write,
+    .valid.min_access_size = 8,
+    .valid.max_access_size = 8,
+    .impl.min_access_size = 8,
+    .impl.max_access_size = 8,
+    .endianness = DEVICE_BIG_ENDIAN,
+};
+
+static uint64_t lpc_hc_read(void *opaque, hwaddr addr, unsigned size)
+{
+    PnvLpcController *lpc = opaque;
+    uint64_t val = 0xfffffffffffffffful;
+
+    switch (addr) {
+    case LPC_HC_FW_SEG_IDSEL:
+        val =  lpc->lpc_hc_fw_seg_idsel;
+        break;
+    case LPC_HC_FW_RD_ACC_SIZE:
+        val =  lpc->lpc_hc_fw_rd_acc_size;
+        break;
+    case LPC_HC_IRQSER_CTRL:
+        val =  lpc->lpc_hc_irqser_ctrl;
+        break;
+    case LPC_HC_IRQMASK:
+        val =  lpc->lpc_hc_irqmask;
+        break;
+    case LPC_HC_IRQSTAT:
+        val =  lpc->lpc_hc_irqstat;
+        break;
+    case LPC_HC_ERROR_ADDRESS:
+        val =  lpc->lpc_hc_error_addr;
+        break;
+    default:
+        qemu_log_mask(LOG_UNIMP, "LPC HC Unimplemented register: Ox%"
+                      HWADDR_PRIx "\n", addr);
+    }
+    return val;
+}
+
+static void lpc_hc_write(void *opaque, hwaddr addr, uint64_t val,
+                         unsigned size)
+{
+    PnvLpcController *lpc = opaque;
+
+    /* XXX Filter out reserved bits */
+
+    switch (addr) {
+    case LPC_HC_FW_SEG_IDSEL:
+        /* XXX Actually figure out how that works as this impact
+         * memory regions/aliases
+         */
+        lpc->lpc_hc_fw_seg_idsel = val;
+        break;
+    case LPC_HC_FW_RD_ACC_SIZE:
+        lpc->lpc_hc_fw_rd_acc_size = val;
+        break;
+    case LPC_HC_IRQSER_CTRL:
+        lpc->lpc_hc_irqser_ctrl = val;
+        break;
+    case LPC_HC_IRQMASK:
+        lpc->lpc_hc_irqmask = val;
+        break;
+    case LPC_HC_IRQSTAT:
+        lpc->lpc_hc_irqstat &= ~val;
+        break;
+    case LPC_HC_ERROR_ADDRESS:
+        break;
+    default:
+        qemu_log_mask(LOG_UNIMP, "LPC HC Unimplemented register: Ox%"
+                      HWADDR_PRIx "\n", addr);
+    }
+}
+
+static const MemoryRegionOps lpc_hc_ops = {
+    .read = lpc_hc_read,
+    .write = lpc_hc_write,
+    .endianness = DEVICE_BIG_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    },
+    .impl = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    },
+};
+
+static uint64_t opb_master_read(void *opaque, hwaddr addr, unsigned size)
+{
+    PnvLpcController *lpc = opaque;
+    uint64_t val = 0xfffffffffffffffful;
+
+    switch (addr) {
+    case OPB_MASTER_LS_IRQ_STAT:
+        val = lpc->opb_irq_stat;
+        break;
+    case OPB_MASTER_LS_IRQ_MASK:
+        val = lpc->opb_irq_mask;
+        break;
+    case OPB_MASTER_LS_IRQ_POL:
+        val = lpc->opb_irq_pol;
+        break;
+    case OPB_MASTER_LS_IRQ_INPUT:
+        val = lpc->opb_irq_input;
+        break;
+    default:
+        qemu_log_mask(LOG_UNIMP, "OPB MASTER Unimplemented register: Ox%"
+                      HWADDR_PRIx "\n", addr);
+    }
+
+    return val;
+}
+
+static void opb_master_write(void *opaque, hwaddr addr,
+                             uint64_t val, unsigned size)
+{
+    PnvLpcController *lpc = opaque;
+
+    switch (addr) {
+    case OPB_MASTER_LS_IRQ_STAT:
+        lpc->opb_irq_stat &= ~val;
+        break;
+    case OPB_MASTER_LS_IRQ_MASK:
+        /* XXX Filter out reserved bits */
+        lpc->opb_irq_mask = val;
+        break;
+    case OPB_MASTER_LS_IRQ_POL:
+        /* XXX Filter out reserved bits */
+        lpc->opb_irq_pol = val;
+        break;
+    case OPB_MASTER_LS_IRQ_INPUT:
+        /* Read only */
+        break;
+    default:
+        qemu_log_mask(LOG_UNIMP, "OPB MASTER Unimplemented register: Ox%"
+                      HWADDR_PRIx "\n", addr);
+    }
+}
+
+static const MemoryRegionOps opb_master_ops = {
+    .read = opb_master_read,
+    .write = opb_master_write,
+    .endianness = DEVICE_BIG_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    },
+    .impl = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    },
+};
+
+static void pnv_lpc_realize(DeviceState *dev, Error **errp)
+{
+    PnvLpcController *lpc = PNV_LPC(dev);
+
+    /* Reg inits */
+    lpc->lpc_hc_fw_rd_acc_size = LPC_HC_FW_RD_4B;
+
+    /* Create address space and backing MR for the OPB bus */
+    memory_region_init(&lpc->opb_mr, OBJECT(dev), "lpc-opb", 0x100000000ull);
+    address_space_init(&lpc->opb_as, &lpc->opb_mr, "lpc-opb");
+
+    /* Create ISA IO and Mem space regions which are the root of
+     * the ISA bus (ie, ISA address spaces). We don't create a
+     * separate one for FW which we alias to memory.
+     */
+    memory_region_init(&lpc->isa_io, OBJECT(dev), "isa-io", ISA_IO_SIZE);
+    memory_region_init(&lpc->isa_mem, OBJECT(dev), "isa-mem", ISA_MEM_SIZE);
+
+    /* Create windows from the OPB space to the ISA space */
+    memory_region_init_alias(&lpc->opb_isa_io, OBJECT(dev), "lpc-isa-io",
+                             &lpc->isa_io, 0, LPC_IO_OPB_SIZE);
+    memory_region_add_subregion(&lpc->opb_mr, LPC_IO_OPB_ADDR,
+                                &lpc->opb_isa_io);
+    memory_region_init_alias(&lpc->opb_isa_mem, OBJECT(dev), "lpc-isa-mem",
+                             &lpc->isa_mem, 0, LPC_MEM_OPB_SIZE);
+    memory_region_add_subregion(&lpc->opb_mr, LPC_MEM_OPB_ADDR,
+                                &lpc->opb_isa_mem);
+    memory_region_init_alias(&lpc->opb_isa_fw, OBJECT(dev), "lpc-isa-fw",
+                             &lpc->isa_mem, 0, LPC_FW_OPB_SIZE);
+    memory_region_add_subregion(&lpc->opb_mr, LPC_FW_OPB_ADDR,
+                                &lpc->opb_isa_fw);
+
+    /* Create MMIO regions for LPC HC and OPB registers */
+    memory_region_init_io(&lpc->opb_master_regs, OBJECT(dev), &opb_master_ops,
+                          lpc, "lpc-opb-master", LPC_OPB_REGS_OPB_SIZE);
+    memory_region_add_subregion(&lpc->opb_mr, LPC_OPB_REGS_OPB_ADDR,
+                                &lpc->opb_master_regs);
+    memory_region_init_io(&lpc->lpc_hc_regs, OBJECT(dev), &lpc_hc_ops, lpc,
+                          "lpc-hc", LPC_HC_REGS_OPB_SIZE);
+    memory_region_add_subregion(&lpc->opb_mr, LPC_HC_REGS_OPB_ADDR,
+                                &lpc->lpc_hc_regs);
+
+    /* XScom region for LPC registers */
+    pnv_xscom_region_init(&lpc->xscom_regs, OBJECT(dev),
+                          &pnv_lpc_xscom_ops, lpc, "xscom-lpc",
+                          PNV_XSCOM_LPC_SIZE);
+}
+
+static void pnv_lpc_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    PnvXScomInterfaceClass *xdc = PNV_XSCOM_INTERFACE_CLASS(klass);
+
+    xdc->populate = pnv_lpc_populate;
+
+    dc->realize = pnv_lpc_realize;
+}
+
+static const TypeInfo pnv_lpc_info = {
+    .name          = TYPE_PNV_LPC,
+    .parent        = TYPE_DEVICE,
+    .instance_size = sizeof(PnvLpcController),
+    .class_init    = pnv_lpc_class_init,
+    .interfaces = (InterfaceInfo[]) {
+        { TYPE_PNV_XSCOM_INTERFACE },
+        { }
+    }
+};
+
+static void pnv_lpc_register_types(void)
+{
+    type_register_static(&pnv_lpc_info);
+}
+
+type_init(pnv_lpc_register_types)

include/hw/ppc/pnv.h

@@ -22,6 +22,7 @@
 #include "hw/boards.h"
 #include "hw/sysbus.h"
 #include "hw/ppc/pnv_xscom.h"
+#include "hw/ppc/pnv_lpc.h"
 
 #define TYPE_PNV_CHIP "powernv-chip"
 #define PNV_CHIP(obj) OBJECT_CHECK(PnvChip, (obj), TYPE_PNV_CHIP)
@@ -54,6 +55,8 @@ typedef struct PnvChip {
     MemoryRegion xscom_mmio;
     MemoryRegion xscom;
     AddressSpace xscom_as;
+
+    PnvLpcController lpc;
 } PnvChip;
 
 typedef struct PnvChipClass {

include/hw/ppc/pnv_lpc.h

+/*
+ * QEMU PowerPC PowerNV LPC controller
+ *
+ * Copyright (c) 2016, IBM Corporation.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _PPC_PNV_LPC_H
+#define _PPC_PNV_LPC_H
+
+#define TYPE_PNV_LPC "pnv-lpc"
+#define PNV_LPC(obj) \
+     OBJECT_CHECK(PnvLpcController, (obj), TYPE_PNV_LPC)
+
+typedef struct PnvLpcController {
+    DeviceState parent;
+
+    uint64_t eccb_stat_reg;
+    uint32_t eccb_data_reg;
+
+    /* OPB bus */
+    MemoryRegion opb_mr;
+    AddressSpace opb_as;
+
+    /* ISA IO and Memory space */
+    MemoryRegion isa_io;
+    MemoryRegion isa_mem;
+
+    /* Windows from OPB to ISA (aliases) */
+    MemoryRegion opb_isa_io;
+    MemoryRegion opb_isa_mem;
+    MemoryRegion opb_isa_fw;
+
+    /* Registers */
+    MemoryRegion lpc_hc_regs;
+    MemoryRegion opb_master_regs;
+
+    /* OPB Master LS registers */
+    uint32_t opb_irq_stat;
+    uint32_t opb_irq_mask;
+    uint32_t opb_irq_pol;
+    uint32_t opb_irq_input;
+
+    /* LPC HC registers */
+    uint32_t lpc_hc_fw_seg_idsel;
+    uint32_t lpc_hc_fw_rd_acc_size;
+    uint32_t lpc_hc_irqser_ctrl;
+    uint32_t lpc_hc_irqmask;
+    uint32_t lpc_hc_irqstat;
+    uint32_t lpc_hc_error_addr;
+
+    /* XSCOM registers */
+    MemoryRegion xscom_regs;
+} PnvLpcController;
+
+#endif /* _PPC_PNV_LPC_H */

include/hw/ppc/pnv_xscom.h

@@ -60,6 +60,9 @@ typedef struct PnvXScomInterfaceClass {
 #define PNV_XSCOM_EX_CORE_BASE(i) (PNV_XSCOM_EX_BASE | (((uint64_t)i) << 24))
 #define PNV_XSCOM_EX_CORE_SIZE    0x100000
 
+#define PNV_XSCOM_LPC_BASE        0xb0020
+#define PNV_XSCOM_LPC_SIZE        0x4
+
 extern void pnv_xscom_realize(PnvChip *chip, Error **errp);
 extern int pnv_xscom_populate(PnvChip *chip, void *fdt, int offset);