diff --git a/hw/a15mpcore.c b/hw/a15mpcore.c
index 5a7b3655485a1e0c07475140fbb14c34bfccc900..fc0a02ae86bbafadc4e98c3d14d3f07d8b01833f 100644
--- a/hw/a15mpcore.c
+++ b/hw/a15mpcore.c
@@ -44,6 +44,7 @@ static int a15mp_priv_init(SysBusDevice *dev)
s->gic = qdev_create(NULL, "arm_gic");
qdev_prop_set_uint32(s->gic, "num-cpu", s->num_cpu);
qdev_prop_set_uint32(s->gic, "num-irq", s->num_irq);
+ qdev_prop_set_uint32(s->gic, "revision", 2);
qdev_init_nofail(s->gic);
busdev = sysbus_from_qdev(s->gic);
diff --git a/hw/a9mpcore.c b/hw/a9mpcore.c
index c2ff74d4b6cab5df56c2bced61cc71b3a6a450a2..ebd5b2917342056f622d3fe60d743268fe9b63ea 100644
--- a/hw/a9mpcore.c
+++ b/hw/a9mpcore.c
@@ -75,7 +75,7 @@ static void a9_scu_write(void *opaque, target_phys_addr_t offset,
break;
default:
fprintf(stderr, "Invalid size %u in write to a9 scu register %x\n",
- size, offset);
+ size, (unsigned)offset);
return;
}
diff --git a/hw/arm-misc.h b/hw/arm-misc.h
index 1d51570c885eaeddd8b394d6b26029e20f29dcd1..1f96229d3c9a0a35627b560294e634a20bbee7df 100644
--- a/hw/arm-misc.h
+++ b/hw/arm-misc.h
@@ -45,9 +45,9 @@ struct arm_boot_info {
/* multicore boards that use the default secondary core boot functions
* can ignore these two function calls. If the default functions won't
* work, then write_secondary_boot() should write a suitable blob of
- * code mimicing the secondary CPU startup process used by the board's
+ * code mimicking the secondary CPU startup process used by the board's
* boot loader/boot ROM code, and secondary_cpu_reset_hook() should
- * perform any necessary CPU reset handling and set the PC for thei
+ * perform any necessary CPU reset handling and set the PC for the
* secondary CPUs to point at this boot blob.
*/
void (*write_secondary_boot)(ARMCPU *cpu,
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index a0ff6a62d6bdaf74ba0518057b541b55b919d5ca..88ff47d95edb030297ae802b093c0836501b5400 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -6,7 +6,7 @@ obj-y += cadence_uart.o
obj-y += cadence_ttc.o
obj-y += cadence_gem.o
obj-y += xilinx_zynq.o zynq_slcr.o
-obj-y += arm_gic.o
+obj-y += arm_gic.o arm_gic_common.o
obj-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
obj-y += exynos4210_gic.o exynos4210_combiner.o exynos4210.o
obj-y += exynos4_boards.o exynos4210_uart.o exynos4210_pwm.o
diff --git a/hw/arm11mpcore.c b/hw/arm11mpcore.c
index c528d7aa011593923fcad2f834339f02b05d5443..1bff3d328212c73bd80d4e4359abe55f0b6dc775 100644
--- a/hw/arm11mpcore.c
+++ b/hw/arm11mpcore.c
@@ -123,6 +123,8 @@ static int mpcore_priv_init(SysBusDevice *dev)
s->gic = qdev_create(NULL, "arm_gic");
qdev_prop_set_uint32(s->gic, "num-cpu", s->num_cpu);
qdev_prop_set_uint32(s->gic, "num-irq", s->num_irq);
+ /* Request the legacy 11MPCore GIC behaviour: */
+ qdev_prop_set_uint32(s->gic, "revision", 0);
qdev_init_nofail(s->gic);
/* Pass through outbound IRQ lines from the GIC */
diff --git a/hw/arm_boot.c b/hw/arm_boot.c
index d0e643ba11130ae6f23f3f84912584036b6c21c4..a1e6ddbc1c01b4ee9740c012cd2aea6accb11b00 100644
--- a/hw/arm_boot.c
+++ b/hw/arm_boot.c
@@ -242,10 +242,12 @@ static int load_dtb(target_phys_addr_t addr, const struct arm_boot_info *binfo)
fprintf(stderr, "couldn't set /memory/reg\n");
}
- rc = qemu_devtree_setprop_string(fdt, "/chosen", "bootargs",
- binfo->kernel_cmdline);
- if (rc < 0) {
- fprintf(stderr, "couldn't set /chosen/bootargs\n");
+ if (binfo->kernel_cmdline && *binfo->kernel_cmdline) {
+ rc = qemu_devtree_setprop_string(fdt, "/chosen", "bootargs",
+ binfo->kernel_cmdline);
+ if (rc < 0) {
+ fprintf(stderr, "couldn't set /chosen/bootargs\n");
+ }
}
if (binfo->initrd_size) {
diff --git a/hw/arm_gic.c b/hw/arm_gic.c
index 72298b4b4164a54a97d5656af44da4fcea84f4c3..ec2232293025ac0c10f4857ed063847555873b63 100644
--- a/hw/arm_gic.c
+++ b/hw/arm_gic.c
@@ -19,17 +19,7 @@
*/
#include "sysbus.h"
-
-/* Maximum number of possible interrupts, determined by the GIC architecture */
-#define GIC_MAXIRQ 1020
-/* First 32 are private to each CPU (SGIs and PPIs). */
-#define GIC_INTERNAL 32
-/* Maximum number of possible CPU interfaces, determined by GIC architecture */
-#ifdef NVIC
-#define NCPU 1
-#else
-#define NCPU 8
-#endif
+#include "arm_gic_internal.h"
//#define DEBUG_GIC
@@ -40,114 +30,23 @@ do { printf("arm_gic: " fmt , ## __VA_ARGS__); } while (0)
#define DPRINTF(fmt, ...) do {} while(0)
#endif
-#ifdef NVIC
-static const uint8_t gic_id[] =
-{ 0x00, 0xb0, 0x1b, 0x00, 0x0d, 0xe0, 0x05, 0xb1 };
-/* The NVIC has 16 internal vectors. However these are not exposed
- through the normal GIC interface. */
-#define GIC_BASE_IRQ 32
-#else
-static const uint8_t gic_id[] =
-{ 0x90, 0x13, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
-#define GIC_BASE_IRQ 0
-#endif
-
-#define FROM_SYSBUSGIC(type, dev) \
- DO_UPCAST(type, gic, FROM_SYSBUS(gic_state, dev))
+static const uint8_t gic_id[] = {
+ 0x90, 0x13, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1
+};
-typedef struct gic_irq_state
-{
- /* The enable bits are only banked for per-cpu interrupts. */
- unsigned enabled:NCPU;
- unsigned pending:NCPU;
- unsigned active:NCPU;
- unsigned level:NCPU;
- unsigned model:1; /* 0 = N:N, 1 = 1:N */
- unsigned trigger:1; /* nonzero = edge triggered. */
-} gic_irq_state;
-
-#define ALL_CPU_MASK ((unsigned)(((1 << NCPU) - 1)))
-#if NCPU > 1
#define NUM_CPU(s) ((s)->num_cpu)
-#else
-#define NUM_CPU(s) 1
-#endif
-
-#define GIC_SET_ENABLED(irq, cm) s->irq_state[irq].enabled |= (cm)
-#define GIC_CLEAR_ENABLED(irq, cm) s->irq_state[irq].enabled &= ~(cm)
-#define GIC_TEST_ENABLED(irq, cm) ((s->irq_state[irq].enabled & (cm)) != 0)
-#define GIC_SET_PENDING(irq, cm) s->irq_state[irq].pending |= (cm)
-#define GIC_CLEAR_PENDING(irq, cm) s->irq_state[irq].pending &= ~(cm)
-#define GIC_TEST_PENDING(irq, cm) ((s->irq_state[irq].pending & (cm)) != 0)
-#define GIC_SET_ACTIVE(irq, cm) s->irq_state[irq].active |= (cm)
-#define GIC_CLEAR_ACTIVE(irq, cm) s->irq_state[irq].active &= ~(cm)
-#define GIC_TEST_ACTIVE(irq, cm) ((s->irq_state[irq].active & (cm)) != 0)
-#define GIC_SET_MODEL(irq) s->irq_state[irq].model = 1
-#define GIC_CLEAR_MODEL(irq) s->irq_state[irq].model = 0
-#define GIC_TEST_MODEL(irq) s->irq_state[irq].model
-#define GIC_SET_LEVEL(irq, cm) s->irq_state[irq].level = (cm)
-#define GIC_CLEAR_LEVEL(irq, cm) s->irq_state[irq].level &= ~(cm)
-#define GIC_TEST_LEVEL(irq, cm) ((s->irq_state[irq].level & (cm)) != 0)
-#define GIC_SET_TRIGGER(irq) s->irq_state[irq].trigger = 1
-#define GIC_CLEAR_TRIGGER(irq) s->irq_state[irq].trigger = 0
-#define GIC_TEST_TRIGGER(irq) s->irq_state[irq].trigger
-#define GIC_GET_PRIORITY(irq, cpu) (((irq) < GIC_INTERNAL) ? \
- s->priority1[irq][cpu] : \
- s->priority2[(irq) - GIC_INTERNAL])
-#ifdef NVIC
-#define GIC_TARGET(irq) 1
-#else
-#define GIC_TARGET(irq) s->irq_target[irq]
-#endif
-
-typedef struct gic_state
-{
- SysBusDevice busdev;
- qemu_irq parent_irq[NCPU];
- int enabled;
- int cpu_enabled[NCPU];
-
- gic_irq_state irq_state[GIC_MAXIRQ];
-#ifndef NVIC
- int irq_target[GIC_MAXIRQ];
-#endif
- int priority1[GIC_INTERNAL][NCPU];
- int priority2[GIC_MAXIRQ - GIC_INTERNAL];
- int last_active[GIC_MAXIRQ][NCPU];
-
- int priority_mask[NCPU];
- int running_irq[NCPU];
- int running_priority[NCPU];
- int current_pending[NCPU];
-
-#if NCPU > 1
- uint32_t num_cpu;
-#endif
-
- MemoryRegion iomem; /* Distributor */
-#ifndef NVIC
- /* This is just so we can have an opaque pointer which identifies
- * both this GIC and which CPU interface we should be accessing.
- */
- struct gic_state *backref[NCPU];
- MemoryRegion cpuiomem[NCPU+1]; /* CPU interfaces */
-#endif
- uint32_t num_irq;
-} gic_state;
static inline int gic_get_current_cpu(gic_state *s)
{
-#if NCPU > 1
if (s->num_cpu > 1) {
return cpu_single_env->cpu_index;
}
-#endif
return 0;
}
/* TODO: Many places that call this routine could be optimized. */
/* Update interrupt status after enabled or pending bits have been changed. */
-static void gic_update(gic_state *s)
+void gic_update(gic_state *s)
{
int best_irq;
int best_prio;
@@ -185,8 +84,7 @@ static void gic_update(gic_state *s)
}
}
-#ifdef NVIC
-static void gic_set_pending_private(gic_state *s, int cpu, int irq)
+void gic_set_pending_private(gic_state *s, int cpu, int irq)
{
int cm = 1 << cpu;
@@ -197,7 +95,6 @@ static void gic_set_pending_private(gic_state *s, int cpu, int irq)
GIC_SET_PENDING(irq, cm);
gic_update(s);
}
-#endif
/* Process a change in an external IRQ input. */
static void gic_set_irq(void *opaque, int irq, int level)
@@ -251,7 +148,7 @@ static void gic_set_running_irq(gic_state *s, int cpu, int irq)
gic_update(s);
}
-static uint32_t gic_acknowledge_irq(gic_state *s, int cpu)
+uint32_t gic_acknowledge_irq(gic_state *s, int cpu)
{
int new_irq;
int cm = 1 << cpu;
@@ -270,7 +167,7 @@ static uint32_t gic_acknowledge_irq(gic_state *s, int cpu)
return new_irq;
}
-static void gic_complete_irq(gic_state * s, int cpu, int irq)
+void gic_complete_irq(gic_state *s, int cpu, int irq)
{
int update = 0;
int cm = 1 << cpu;
@@ -328,7 +225,6 @@ static uint32_t gic_dist_readb(void *opaque, target_phys_addr_t offset)
cpu = gic_get_current_cpu(s);
cm = 1 << cpu;
if (offset < 0x100) {
-#ifndef NVIC
if (offset == 0)
return s->enabled;
if (offset == 4)
@@ -339,7 +235,6 @@ static uint32_t gic_dist_readb(void *opaque, target_phys_addr_t offset)
/* Interrupt Security , RAZ/WI */
return 0;
}
-#endif
goto bad_reg;
} else if (offset < 0x200) {
/* Interrupt Set/Clear Enable. */
@@ -390,16 +285,21 @@ static uint32_t gic_dist_readb(void *opaque, target_phys_addr_t offset)
if (irq >= s->num_irq)
goto bad_reg;
res = GIC_GET_PRIORITY(irq, cpu);
-#ifndef NVIC
} else if (offset < 0xc00) {
/* Interrupt CPU Target. */
- irq = (offset - 0x800) + GIC_BASE_IRQ;
- if (irq >= s->num_irq)
- goto bad_reg;
- if (irq >= 29 && irq <= 31) {
- res = cm;
+ if (s->num_cpu == 1 && s->revision != REV_11MPCORE) {
+ /* For uniprocessor GICs these RAZ/WI */
+ res = 0;
} else {
- res = GIC_TARGET(irq);
+ irq = (offset - 0x800) + GIC_BASE_IRQ;
+ if (irq >= s->num_irq) {
+ goto bad_reg;
+ }
+ if (irq >= 29 && irq <= 31) {
+ res = cm;
+ } else {
+ res = GIC_TARGET(irq);
+ }
}
} else if (offset < 0xf00) {
/* Interrupt Configuration. */
@@ -413,7 +313,6 @@ static uint32_t gic_dist_readb(void *opaque, target_phys_addr_t offset)
if (GIC_TEST_TRIGGER(irq + i))
res |= (2 << (i * 2));
}
-#endif
} else if (offset < 0xfe0) {
goto bad_reg;
} else /* offset >= 0xfe0 */ {
@@ -440,13 +339,6 @@ static uint32_t gic_dist_readw(void *opaque, target_phys_addr_t offset)
static uint32_t gic_dist_readl(void *opaque, target_phys_addr_t offset)
{
uint32_t val;
-#ifdef NVIC
- gic_state *s = (gic_state *)opaque;
- uint32_t addr;
- addr = offset;
- if (addr < 0x100 || addr > 0xd00)
- return nvic_readl(s, addr);
-#endif
val = gic_dist_readw(opaque, offset);
val |= gic_dist_readw(opaque, offset + 2) << 16;
return val;
@@ -462,9 +354,6 @@ static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
cpu = gic_get_current_cpu(s);
if (offset < 0x100) {
-#ifdef NVIC
- goto bad_reg;
-#else
if (offset == 0) {
s->enabled = (value & 1);
DPRINTF("Distribution %sabled\n", s->enabled ? "En" : "Dis");
@@ -475,7 +364,6 @@ static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
} else {
goto bad_reg;
}
-#endif
} else if (offset < 0x180) {
/* Interrupt Set Enable. */
irq = (offset - 0x100) * 8 + GIC_BASE_IRQ;
@@ -557,17 +445,22 @@ static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
} else {
s->priority2[irq - GIC_INTERNAL] = value;
}
-#ifndef NVIC
} else if (offset < 0xc00) {
- /* Interrupt CPU Target. */
- irq = (offset - 0x800) + GIC_BASE_IRQ;
- if (irq >= s->num_irq)
- goto bad_reg;
- if (irq < 29)
- value = 0;
- else if (irq < GIC_INTERNAL)
- value = ALL_CPU_MASK;
- s->irq_target[irq] = value & ALL_CPU_MASK;
+ /* Interrupt CPU Target. RAZ/WI on uniprocessor GICs, with the
+ * annoying exception of the 11MPCore's GIC.
+ */
+ if (s->num_cpu != 1 || s->revision == REV_11MPCORE) {
+ irq = (offset - 0x800) + GIC_BASE_IRQ;
+ if (irq >= s->num_irq) {
+ goto bad_reg;
+ }
+ if (irq < 29) {
+ value = 0;
+ } else if (irq < GIC_INTERNAL) {
+ value = ALL_CPU_MASK;
+ }
+ s->irq_target[irq] = value & ALL_CPU_MASK;
+ }
} else if (offset < 0xf00) {
/* Interrupt Configuration. */
irq = (offset - 0xc00) * 4 + GIC_BASE_IRQ;
@@ -587,7 +480,6 @@ static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
GIC_CLEAR_TRIGGER(irq + i);
}
}
-#endif
} else {
/* 0xf00 is only handled for 32-bit writes. */
goto bad_reg;
@@ -609,14 +501,6 @@ static void gic_dist_writel(void *opaque, target_phys_addr_t offset,
uint32_t value)
{
gic_state *s = (gic_state *)opaque;
-#ifdef NVIC
- uint32_t addr;
- addr = offset;
- if (addr < 0x100 || (addr > 0xd00 && addr != 0xf00)) {
- nvic_writel(s, addr, value);
- return;
- }
-#endif
if (offset == 0xf00) {
int cpu;
int irq;
@@ -655,7 +539,6 @@ static const MemoryRegionOps gic_dist_ops = {
.endianness = DEVICE_NATIVE_ENDIAN,
};
-#ifndef NVIC
static uint32_t gic_cpu_read(gic_state *s, int cpu, int offset)
{
switch (offset) {
@@ -747,141 +630,12 @@ static const MemoryRegionOps gic_cpu_ops = {
.write = gic_do_cpu_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
-#endif
-
-static void gic_reset(DeviceState *dev)
-{
- gic_state *s = FROM_SYSBUS(gic_state, sysbus_from_qdev(dev));
- int i;
- memset(s->irq_state, 0, GIC_MAXIRQ * sizeof(gic_irq_state));
- for (i = 0 ; i < NUM_CPU(s); i++) {
- s->priority_mask[i] = 0xf0;
- s->current_pending[i] = 1023;
- s->running_irq[i] = 1023;
- s->running_priority[i] = 0x100;
-#ifdef NVIC
- /* The NVIC doesn't have per-cpu interfaces, so enable by default. */
- s->cpu_enabled[i] = 1;
-#else
- s->cpu_enabled[i] = 0;
-#endif
- }
- for (i = 0; i < 16; i++) {
- GIC_SET_ENABLED(i, ALL_CPU_MASK);
- GIC_SET_TRIGGER(i);
- }
-#ifdef NVIC
- /* The NVIC is always enabled. */
- s->enabled = 1;
-#else
- s->enabled = 0;
-#endif
-}
-static void gic_save(QEMUFile *f, void *opaque)
-{
- gic_state *s = (gic_state *)opaque;
- int i;
- int j;
-
- qemu_put_be32(f, s->enabled);
- for (i = 0; i < NUM_CPU(s); i++) {
- qemu_put_be32(f, s->cpu_enabled[i]);
- for (j = 0; j < GIC_INTERNAL; j++)
- qemu_put_be32(f, s->priority1[j][i]);
- for (j = 0; j < s->num_irq; j++)
- qemu_put_be32(f, s->last_active[j][i]);
- qemu_put_be32(f, s->priority_mask[i]);
- qemu_put_be32(f, s->running_irq[i]);
- qemu_put_be32(f, s->running_priority[i]);
- qemu_put_be32(f, s->current_pending[i]);
- }
- for (i = 0; i < s->num_irq - GIC_INTERNAL; i++) {
- qemu_put_be32(f, s->priority2[i]);
- }
- for (i = 0; i < s->num_irq; i++) {
-#ifndef NVIC
- qemu_put_be32(f, s->irq_target[i]);
-#endif
- qemu_put_byte(f, s->irq_state[i].enabled);
- qemu_put_byte(f, s->irq_state[i].pending);
- qemu_put_byte(f, s->irq_state[i].active);
- qemu_put_byte(f, s->irq_state[i].level);
- qemu_put_byte(f, s->irq_state[i].model);
- qemu_put_byte(f, s->irq_state[i].trigger);
- }
-}
-
-static int gic_load(QEMUFile *f, void *opaque, int version_id)
-{
- gic_state *s = (gic_state *)opaque;
- int i;
- int j;
-
- if (version_id != 2)
- return -EINVAL;
-
- s->enabled = qemu_get_be32(f);
- for (i = 0; i < NUM_CPU(s); i++) {
- s->cpu_enabled[i] = qemu_get_be32(f);
- for (j = 0; j < GIC_INTERNAL; j++)
- s->priority1[j][i] = qemu_get_be32(f);
- for (j = 0; j < s->num_irq; j++)
- s->last_active[j][i] = qemu_get_be32(f);
- s->priority_mask[i] = qemu_get_be32(f);
- s->running_irq[i] = qemu_get_be32(f);
- s->running_priority[i] = qemu_get_be32(f);
- s->current_pending[i] = qemu_get_be32(f);
- }
- for (i = 0; i < s->num_irq - GIC_INTERNAL; i++) {
- s->priority2[i] = qemu_get_be32(f);
- }
- for (i = 0; i < s->num_irq; i++) {
-#ifndef NVIC
- s->irq_target[i] = qemu_get_be32(f);
-#endif
- s->irq_state[i].enabled = qemu_get_byte(f);
- s->irq_state[i].pending = qemu_get_byte(f);
- s->irq_state[i].active = qemu_get_byte(f);
- s->irq_state[i].level = qemu_get_byte(f);
- s->irq_state[i].model = qemu_get_byte(f);
- s->irq_state[i].trigger = qemu_get_byte(f);
- }
-
- return 0;
-}
-
-#if NCPU > 1
-static void gic_init(gic_state *s, int num_cpu, int num_irq)
-#else
-static void gic_init(gic_state *s, int num_irq)
-#endif
+void gic_init_irqs_and_distributor(gic_state *s, int num_irq)
{
int i;
-#if NCPU > 1
- s->num_cpu = num_cpu;
- if (s->num_cpu > NCPU) {
- hw_error("requested %u CPUs exceeds GIC maximum %d\n",
- num_cpu, NCPU);
- }
-#endif
- s->num_irq = num_irq + GIC_BASE_IRQ;
- if (s->num_irq > GIC_MAXIRQ) {
- hw_error("requested %u interrupt lines exceeds GIC maximum %d\n",
- num_irq, GIC_MAXIRQ);
- }
- /* ITLinesNumber is represented as (N / 32) - 1 (see
- * gic_dist_readb) so this is an implementation imposed
- * restriction, not an architectural one:
- */
- if (s->num_irq < 32 || (s->num_irq % 32)) {
- hw_error("%d interrupt lines unsupported: not divisible by 32\n",
- num_irq);
- }
-
i = s->num_irq - GIC_INTERNAL;
-#ifndef NVIC
/* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
* GPIO array layout is thus:
* [0..N-1] SPIs
@@ -889,14 +643,27 @@ static void gic_init(gic_state *s, int num_irq)
* [N+32..N+63] PPIs for CPU 1
* ...
*/
- i += (GIC_INTERNAL * num_cpu);
-#endif
+ if (s->revision != REV_NVIC) {
+ i += (GIC_INTERNAL * s->num_cpu);
+ }
qdev_init_gpio_in(&s->busdev.qdev, gic_set_irq, i);
for (i = 0; i < NUM_CPU(s); i++) {
sysbus_init_irq(&s->busdev, &s->parent_irq[i]);
}
memory_region_init_io(&s->iomem, &gic_dist_ops, s, "gic_dist", 0x1000);
-#ifndef NVIC
+}
+
+static int arm_gic_init(SysBusDevice *dev)
+{
+ /* Device instance init function for the GIC sysbus device */
+ int i;
+ gic_state *s = FROM_SYSBUS(gic_state, dev);
+ ARMGICClass *agc = ARM_GIC_GET_CLASS(s);
+
+ agc->parent_init(dev);
+
+ gic_init_irqs_and_distributor(s, s->num_irq);
+
/* Memory regions for the CPU interfaces (NVIC doesn't have these):
* a region for "CPU interface for this core", then a region for
* "CPU interface for core 0", "for core 1", ...
@@ -912,19 +679,6 @@ static void gic_init(gic_state *s, int num_irq)
memory_region_init_io(&s->cpuiomem[i+1], &gic_cpu_ops, &s->backref[i],
"gic_cpu", 0x100);
}
-#endif
-
- register_savevm(NULL, "arm_gic", -1, 2, gic_save, gic_load, s);
-}
-
-#ifndef NVIC
-
-static int arm_gic_init(SysBusDevice *dev)
-{
- /* Device instance init function for the GIC sysbus device */
- int i;
- gic_state *s = FROM_SYSBUS(gic_state, dev);
- gic_init(s, s->num_cpu, s->num_irq);
/* Distributor */
sysbus_init_mmio(dev, &s->iomem);
/* cpu interfaces (one for "current cpu" plus one per cpu) */
@@ -934,25 +688,19 @@ static int arm_gic_init(SysBusDevice *dev)
return 0;
}
-static Property arm_gic_properties[] = {
- DEFINE_PROP_UINT32("num-cpu", gic_state, num_cpu, 1),
- DEFINE_PROP_UINT32("num-irq", gic_state, num_irq, 32),
- DEFINE_PROP_END_OF_LIST(),
-};
-
static void arm_gic_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
SysBusDeviceClass *sbc = SYS_BUS_DEVICE_CLASS(klass);
+ ARMGICClass *agc = ARM_GIC_CLASS(klass);
+ agc->parent_init = sbc->init;
sbc->init = arm_gic_init;
- dc->props = arm_gic_properties;
- dc->reset = gic_reset;
dc->no_user = 1;
}
static TypeInfo arm_gic_info = {
- .name = "arm_gic",
- .parent = TYPE_SYS_BUS_DEVICE,
+ .name = TYPE_ARM_GIC,
+ .parent = TYPE_ARM_GIC_COMMON,
.instance_size = sizeof(gic_state),
.class_init = arm_gic_class_init,
};
@@ -963,5 +711,3 @@ static void arm_gic_register_types(void)
}
type_init(arm_gic_register_types)
-
-#endif
diff --git a/hw/arm_gic_common.c b/hw/arm_gic_common.c
new file mode 100644
index 0000000000000000000000000000000000000000..360e7823f769eef951af9647acf7837a5288375b
--- /dev/null
+++ b/hw/arm_gic_common.c
@@ -0,0 +1,184 @@
+/*
+ * ARM GIC support - common bits of emulated and KVM kernel model
+ *
+ * Copyright (c) 2012 Linaro Limited
+ * Written by Peter Maydell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see .
+ */
+
+#include "arm_gic_internal.h"
+
+static void gic_save(QEMUFile *f, void *opaque)
+{
+ gic_state *s = (gic_state *)opaque;
+ int i;
+ int j;
+
+ qemu_put_be32(f, s->enabled);
+ for (i = 0; i < s->num_cpu; i++) {
+ qemu_put_be32(f, s->cpu_enabled[i]);
+ for (j = 0; j < GIC_INTERNAL; j++) {
+ qemu_put_be32(f, s->priority1[j][i]);
+ }
+ for (j = 0; j < s->num_irq; j++) {
+ qemu_put_be32(f, s->last_active[j][i]);
+ }
+ qemu_put_be32(f, s->priority_mask[i]);
+ qemu_put_be32(f, s->running_irq[i]);
+ qemu_put_be32(f, s->running_priority[i]);
+ qemu_put_be32(f, s->current_pending[i]);
+ }
+ for (i = 0; i < s->num_irq - GIC_INTERNAL; i++) {
+ qemu_put_be32(f, s->priority2[i]);
+ }
+ for (i = 0; i < s->num_irq; i++) {
+ qemu_put_be32(f, s->irq_target[i]);
+ qemu_put_byte(f, s->irq_state[i].enabled);
+ qemu_put_byte(f, s->irq_state[i].pending);
+ qemu_put_byte(f, s->irq_state[i].active);
+ qemu_put_byte(f, s->irq_state[i].level);
+ qemu_put_byte(f, s->irq_state[i].model);
+ qemu_put_byte(f, s->irq_state[i].trigger);
+ }
+}
+
+static int gic_load(QEMUFile *f, void *opaque, int version_id)
+{
+ gic_state *s = (gic_state *)opaque;
+ int i;
+ int j;
+
+ if (version_id != 3) {
+ return -EINVAL;
+ }
+
+ s->enabled = qemu_get_be32(f);
+ for (i = 0; i < s->num_cpu; i++) {
+ s->cpu_enabled[i] = qemu_get_be32(f);
+ for (j = 0; j < GIC_INTERNAL; j++) {
+ s->priority1[j][i] = qemu_get_be32(f);
+ }
+ for (j = 0; j < s->num_irq; j++) {
+ s->last_active[j][i] = qemu_get_be32(f);
+ }
+ s->priority_mask[i] = qemu_get_be32(f);
+ s->running_irq[i] = qemu_get_be32(f);
+ s->running_priority[i] = qemu_get_be32(f);
+ s->current_pending[i] = qemu_get_be32(f);
+ }
+ for (i = 0; i < s->num_irq - GIC_INTERNAL; i++) {
+ s->priority2[i] = qemu_get_be32(f);
+ }
+ for (i = 0; i < s->num_irq; i++) {
+ s->irq_target[i] = qemu_get_be32(f);
+ s->irq_state[i].enabled = qemu_get_byte(f);
+ s->irq_state[i].pending = qemu_get_byte(f);
+ s->irq_state[i].active = qemu_get_byte(f);
+ s->irq_state[i].level = qemu_get_byte(f);
+ s->irq_state[i].model = qemu_get_byte(f);
+ s->irq_state[i].trigger = qemu_get_byte(f);
+ }
+
+ return 0;
+}
+
+static int arm_gic_common_init(SysBusDevice *dev)
+{
+ gic_state *s = FROM_SYSBUS(gic_state, dev);
+ int num_irq = s->num_irq;
+
+ if (s->num_cpu > NCPU) {
+ hw_error("requested %u CPUs exceeds GIC maximum %d\n",
+ s->num_cpu, NCPU);
+ }
+ s->num_irq += GIC_BASE_IRQ;
+ if (s->num_irq > GIC_MAXIRQ) {
+ hw_error("requested %u interrupt lines exceeds GIC maximum %d\n",
+ num_irq, GIC_MAXIRQ);
+ }
+ /* ITLinesNumber is represented as (N / 32) - 1 (see
+ * gic_dist_readb) so this is an implementation imposed
+ * restriction, not an architectural one:
+ */
+ if (s->num_irq < 32 || (s->num_irq % 32)) {
+ hw_error("%d interrupt lines unsupported: not divisible by 32\n",
+ num_irq);
+ }
+
+ register_savevm(NULL, "arm_gic", -1, 3, gic_save, gic_load, s);
+ return 0;
+}
+
+static void arm_gic_common_reset(DeviceState *dev)
+{
+ gic_state *s = FROM_SYSBUS(gic_state, sysbus_from_qdev(dev));
+ int i;
+ memset(s->irq_state, 0, GIC_MAXIRQ * sizeof(gic_irq_state));
+ for (i = 0 ; i < s->num_cpu; i++) {
+ s->priority_mask[i] = 0xf0;
+ s->current_pending[i] = 1023;
+ s->running_irq[i] = 1023;
+ s->running_priority[i] = 0x100;
+ s->cpu_enabled[i] = 0;
+ }
+ for (i = 0; i < 16; i++) {
+ GIC_SET_ENABLED(i, ALL_CPU_MASK);
+ GIC_SET_TRIGGER(i);
+ }
+ if (s->num_cpu == 1) {
+ /* For uniprocessor GICs all interrupts always target the sole CPU */
+ for (i = 0; i < GIC_MAXIRQ; i++) {
+ s->irq_target[i] = 1;
+ }
+ }
+ s->enabled = 0;
+}
+
+static Property arm_gic_common_properties[] = {
+ DEFINE_PROP_UINT32("num-cpu", gic_state, num_cpu, 1),
+ DEFINE_PROP_UINT32("num-irq", gic_state, num_irq, 32),
+ /* Revision can be 1 or 2 for GIC architecture specification
+ * versions 1 or 2, or 0 to indicate the legacy 11MPCore GIC.
+ * (Internally, 0xffffffff also indicates "not a GIC but an NVIC".)
+ */
+ DEFINE_PROP_UINT32("revision", gic_state, revision, 1),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void arm_gic_common_class_init(ObjectClass *klass, void *data)
+{
+ SysBusDeviceClass *sc = SYS_BUS_DEVICE_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ dc->reset = arm_gic_common_reset;
+ dc->props = arm_gic_common_properties;
+ dc->no_user = 1;
+ sc->init = arm_gic_common_init;
+}
+
+static TypeInfo arm_gic_common_type = {
+ .name = TYPE_ARM_GIC_COMMON,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(gic_state),
+ .class_size = sizeof(ARMGICCommonClass),
+ .class_init = arm_gic_common_class_init,
+ .abstract = true,
+};
+
+static void register_types(void)
+{
+ type_register_static(&arm_gic_common_type);
+}
+
+type_init(register_types)
diff --git a/hw/arm_gic_internal.h b/hw/arm_gic_internal.h
new file mode 100644
index 0000000000000000000000000000000000000000..db4fad564f97d580576bc93baac91a5415902161
--- /dev/null
+++ b/hw/arm_gic_internal.h
@@ -0,0 +1,136 @@
+/*
+ * ARM GIC support - internal interfaces
+ *
+ * Copyright (c) 2012 Linaro Limited
+ * Written by Peter Maydell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see .
+ */
+
+#ifndef QEMU_ARM_GIC_INTERNAL_H
+#define QEMU_ARM_GIC_INTERNAL_H
+
+#include "sysbus.h"
+
+/* Maximum number of possible interrupts, determined by the GIC architecture */
+#define GIC_MAXIRQ 1020
+/* First 32 are private to each CPU (SGIs and PPIs). */
+#define GIC_INTERNAL 32
+/* Maximum number of possible CPU interfaces, determined by GIC architecture */
+#define NCPU 8
+
+#define ALL_CPU_MASK ((unsigned)(((1 << NCPU) - 1)))
+
+/* The NVIC has 16 internal vectors. However these are not exposed
+ through the normal GIC interface. */
+#define GIC_BASE_IRQ ((s->revision == REV_NVIC) ? 32 : 0)
+
+#define GIC_SET_ENABLED(irq, cm) s->irq_state[irq].enabled |= (cm)
+#define GIC_CLEAR_ENABLED(irq, cm) s->irq_state[irq].enabled &= ~(cm)
+#define GIC_TEST_ENABLED(irq, cm) ((s->irq_state[irq].enabled & (cm)) != 0)
+#define GIC_SET_PENDING(irq, cm) s->irq_state[irq].pending |= (cm)
+#define GIC_CLEAR_PENDING(irq, cm) s->irq_state[irq].pending &= ~(cm)
+#define GIC_TEST_PENDING(irq, cm) ((s->irq_state[irq].pending & (cm)) != 0)
+#define GIC_SET_ACTIVE(irq, cm) s->irq_state[irq].active |= (cm)
+#define GIC_CLEAR_ACTIVE(irq, cm) s->irq_state[irq].active &= ~(cm)
+#define GIC_TEST_ACTIVE(irq, cm) ((s->irq_state[irq].active & (cm)) != 0)
+#define GIC_SET_MODEL(irq) s->irq_state[irq].model = 1
+#define GIC_CLEAR_MODEL(irq) s->irq_state[irq].model = 0
+#define GIC_TEST_MODEL(irq) s->irq_state[irq].model
+#define GIC_SET_LEVEL(irq, cm) s->irq_state[irq].level = (cm)
+#define GIC_CLEAR_LEVEL(irq, cm) s->irq_state[irq].level &= ~(cm)
+#define GIC_TEST_LEVEL(irq, cm) ((s->irq_state[irq].level & (cm)) != 0)
+#define GIC_SET_TRIGGER(irq) s->irq_state[irq].trigger = 1
+#define GIC_CLEAR_TRIGGER(irq) s->irq_state[irq].trigger = 0
+#define GIC_TEST_TRIGGER(irq) s->irq_state[irq].trigger
+#define GIC_GET_PRIORITY(irq, cpu) (((irq) < GIC_INTERNAL) ? \
+ s->priority1[irq][cpu] : \
+ s->priority2[(irq) - GIC_INTERNAL])
+#define GIC_TARGET(irq) s->irq_target[irq]
+
+typedef struct gic_irq_state {
+ /* The enable bits are only banked for per-cpu interrupts. */
+ unsigned enabled:NCPU;
+ unsigned pending:NCPU;
+ unsigned active:NCPU;
+ unsigned level:NCPU;
+ unsigned model:1; /* 0 = N:N, 1 = 1:N */
+ unsigned trigger:1; /* nonzero = edge triggered. */
+} gic_irq_state;
+
+typedef struct gic_state {
+ SysBusDevice busdev;
+ qemu_irq parent_irq[NCPU];
+ int enabled;
+ int cpu_enabled[NCPU];
+
+ gic_irq_state irq_state[GIC_MAXIRQ];
+ int irq_target[GIC_MAXIRQ];
+ int priority1[GIC_INTERNAL][NCPU];
+ int priority2[GIC_MAXIRQ - GIC_INTERNAL];
+ int last_active[GIC_MAXIRQ][NCPU];
+
+ int priority_mask[NCPU];
+ int running_irq[NCPU];
+ int running_priority[NCPU];
+ int current_pending[NCPU];
+
+ uint32_t num_cpu;
+
+ MemoryRegion iomem; /* Distributor */
+ /* This is just so we can have an opaque pointer which identifies
+ * both this GIC and which CPU interface we should be accessing.
+ */
+ struct gic_state *backref[NCPU];
+ MemoryRegion cpuiomem[NCPU+1]; /* CPU interfaces */
+ uint32_t num_irq;
+ uint32_t revision;
+} gic_state;
+
+/* The special cases for the revision property: */
+#define REV_11MPCORE 0
+#define REV_NVIC 0xffffffff
+
+void gic_set_pending_private(gic_state *s, int cpu, int irq);
+uint32_t gic_acknowledge_irq(gic_state *s, int cpu);
+void gic_complete_irq(gic_state *s, int cpu, int irq);
+void gic_update(gic_state *s);
+void gic_init_irqs_and_distributor(gic_state *s, int num_irq);
+
+#define TYPE_ARM_GIC_COMMON "arm_gic_common"
+#define ARM_GIC_COMMON(obj) \
+ OBJECT_CHECK(gic_state, (obj), TYPE_ARM_GIC_COMMON)
+#define ARM_GIC_COMMON_CLASS(klass) \
+ OBJECT_CLASS_CHECK(ARMGICCommonClass, (klass), TYPE_ARM_GIC_COMMON)
+#define ARM_GIC_COMMON_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(ARMGICCommonClass, (obj), TYPE_ARM_GIC_COMMON)
+
+typedef struct ARMGICCommonClass {
+ SysBusDeviceClass parent_class;
+} ARMGICCommonClass;
+
+#define TYPE_ARM_GIC "arm_gic"
+#define ARM_GIC(obj) \
+ OBJECT_CHECK(gic_state, (obj), TYPE_ARM_GIC)
+#define ARM_GIC_CLASS(klass) \
+ OBJECT_CLASS_CHECK(ARMGICClass, (klass), TYPE_ARM_GIC)
+#define ARM_GIC_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(ARMGICClass, (obj), TYPE_ARM_GIC)
+
+typedef struct ARMGICClass {
+ ARMGICCommonClass parent_class;
+ int (*parent_init)(SysBusDevice *dev);
+} ARMGICClass;
+
+#endif /* !QEMU_ARM_GIC_INTERNAL_H */
diff --git a/hw/armv7m_nvic.c b/hw/armv7m_nvic.c
index 986a6bbd0c44233867e346c4953b25521c937c33..4867c1d5fa504c62c411a146693bb9ada8aa1f86 100644
--- a/hw/armv7m_nvic.c
+++ b/hw/armv7m_nvic.c
@@ -14,13 +14,7 @@
#include "qemu-timer.h"
#include "arm-misc.h"
#include "exec-memory.h"
-
-#define NVIC 1
-
-static uint32_t nvic_readl(void *opaque, uint32_t offset);
-static void nvic_writel(void *opaque, uint32_t offset, uint32_t value);
-
-#include "arm_gic.c"
+#include "arm_gic_internal.h"
typedef struct {
gic_state gic;
@@ -30,9 +24,38 @@ typedef struct {
int64_t tick;
QEMUTimer *timer;
} systick;
+ MemoryRegion sysregmem;
+ MemoryRegion gic_iomem_alias;
+ MemoryRegion container;
uint32_t num_irq;
} nvic_state;
+#define TYPE_NVIC "armv7m_nvic"
+/**
+ * NVICClass:
+ * @parent_reset: the parent class' reset handler.
+ *
+ * A model of the v7M NVIC and System Controller
+ */
+typedef struct NVICClass {
+ /*< private >*/
+ ARMGICClass parent_class;
+ /*< public >*/
+ int (*parent_init)(SysBusDevice *dev);
+ void (*parent_reset)(DeviceState *dev);
+} NVICClass;
+
+#define NVIC_CLASS(klass) \
+ OBJECT_CLASS_CHECK(NVICClass, (klass), TYPE_NVIC)
+#define NVIC_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(NVICClass, (obj), TYPE_NVIC)
+#define NVIC(obj) \
+ OBJECT_CHECK(nvic_state, (obj), TYPE_NVIC)
+
+static const uint8_t nvic_id[] = {
+ 0x00, 0xb0, 0x1b, 0x00, 0x0d, 0xe0, 0x05, 0xb1
+};
+
/* qemu timers run at 1GHz. We want something closer to 1MHz. */
#define SYSTICK_SCALE 1000ULL
@@ -358,12 +381,54 @@ static void nvic_writel(void *opaque, uint32_t offset, uint32_t value)
case 0xd38: /* Bus Fault Address. */
case 0xd3c: /* Aux Fault Status. */
goto bad_reg;
+ case 0xf00: /* Software Triggered Interrupt Register */
+ if ((value & 0x1ff) < s->num_irq) {
+ gic_set_pending_private(&s->gic, 0, value & 0x1ff);
+ }
+ break;
default:
bad_reg:
hw_error("NVIC: Bad write offset 0x%x\n", offset);
}
}
+static uint64_t nvic_sysreg_read(void *opaque, target_phys_addr_t addr,
+ unsigned size)
+{
+ /* At the moment we only support the ID registers for byte/word access.
+ * This is not strictly correct as a few of the other registers also
+ * allow byte access.
+ */
+ uint32_t offset = addr;
+ if (offset >= 0xfe0) {
+ if (offset & 3) {
+ return 0;
+ }
+ return nvic_id[(offset - 0xfe0) >> 2];
+ }
+ if (size == 4) {
+ return nvic_readl(opaque, offset);
+ }
+ hw_error("NVIC: Bad read of size %d at offset 0x%x\n", size, offset);
+}
+
+static void nvic_sysreg_write(void *opaque, target_phys_addr_t addr,
+ uint64_t value, unsigned size)
+{
+ uint32_t offset = addr;
+ if (size == 4) {
+ nvic_writel(opaque, offset, value);
+ return;
+ }
+ hw_error("NVIC: Bad write of size %d at offset 0x%x\n", size, offset);
+}
+
+static const MemoryRegionOps nvic_sysreg_ops = {
+ .read = nvic_sysreg_read,
+ .write = nvic_sysreg_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
static const VMStateDescription vmstate_nvic = {
.name = "armv7m_nvic",
.version_id = 1,
@@ -380,20 +445,55 @@ static const VMStateDescription vmstate_nvic = {
static void armv7m_nvic_reset(DeviceState *dev)
{
- nvic_state *s = FROM_SYSBUSGIC(nvic_state, sysbus_from_qdev(dev));
- gic_reset(&s->gic.busdev.qdev);
+ nvic_state *s = NVIC(dev);
+ NVICClass *nc = NVIC_GET_CLASS(s);
+ nc->parent_reset(dev);
+ /* Common GIC reset resets to disabled; the NVIC doesn't have
+ * per-CPU interfaces so mark our non-existent CPU interface
+ * as enabled by default.
+ */
+ s->gic.cpu_enabled[0] = 1;
+ /* The NVIC as a whole is always enabled. */
+ s->gic.enabled = 1;
systick_reset(s);
}
static int armv7m_nvic_init(SysBusDevice *dev)
{
- nvic_state *s= FROM_SYSBUSGIC(nvic_state, dev);
+ nvic_state *s = NVIC(dev);
+ NVICClass *nc = NVIC_GET_CLASS(s);
- /* note that for the M profile gic_init() takes the number of external
- * interrupt lines only.
- */
- gic_init(&s->gic, s->num_irq);
- memory_region_add_subregion(get_system_memory(), 0xe000e000, &s->gic.iomem);
+ /* The NVIC always has only one CPU */
+ s->gic.num_cpu = 1;
+ /* Tell the common code we're an NVIC */
+ s->gic.revision = 0xffffffff;
+ s->gic.num_irq = s->num_irq;
+ nc->parent_init(dev);
+ gic_init_irqs_and_distributor(&s->gic, s->num_irq);
+ /* The NVIC and system controller register area looks like this:
+ * 0..0xff : system control registers, including systick
+ * 0x100..0xcff : GIC-like registers
+ * 0xd00..0xfff : system control registers
+ * We use overlaying to put the GIC like registers
+ * over the top of the system control register region.
+ */
+ memory_region_init(&s->container, "nvic", 0x1000);
+ /* The system register region goes at the bottom of the priority
+ * stack as it covers the whole page.
+ */
+ memory_region_init_io(&s->sysregmem, &nvic_sysreg_ops, s,
+ "nvic_sysregs", 0x1000);
+ memory_region_add_subregion(&s->container, 0, &s->sysregmem);
+ /* Alias the GIC region so we can get only the section of it
+ * we need, and layer it on top of the system register region.
+ */
+ memory_region_init_alias(&s->gic_iomem_alias, "nvic-gic", &s->gic.iomem,
+ 0x100, 0xc00);
+ memory_region_add_subregion_overlap(&s->container, 0x100, &s->gic.iomem, 1);
+ /* Map the whole thing into system memory at the location required
+ * by the v7M architecture.
+ */
+ memory_region_add_subregion(get_system_memory(), 0xe000e000, &s->container);
s->systick.timer = qemu_new_timer_ns(vm_clock, systick_timer_tick, s);
return 0;
}
@@ -409,9 +509,12 @@ static Property armv7m_nvic_properties[] = {
static void armv7m_nvic_class_init(ObjectClass *klass, void *data)
{
+ NVICClass *nc = NVIC_CLASS(klass);
DeviceClass *dc = DEVICE_CLASS(klass);
SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
+ nc->parent_reset = dc->reset;
+ nc->parent_init = sdc->init;
sdc->init = armv7m_nvic_init;
dc->vmsd = &vmstate_nvic;
dc->reset = armv7m_nvic_reset;
@@ -419,10 +522,11 @@ static void armv7m_nvic_class_init(ObjectClass *klass, void *data)
}
static TypeInfo armv7m_nvic_info = {
- .name = "armv7m_nvic",
- .parent = TYPE_SYS_BUS_DEVICE,
+ .name = TYPE_NVIC,
+ .parent = TYPE_ARM_GIC_COMMON,
.instance_size = sizeof(nvic_state),
.class_init = armv7m_nvic_class_init,
+ .class_size = sizeof(NVICClass),
};
static void armv7m_nvic_register_types(void)
diff --git a/hw/cadence_gem.c b/hw/cadence_gem.c
index e2140aea2bf9471d0bfba7c1aebbbbbbfc25992e..dbde3920d0908b8e81467f9fa445baaa2b828b2e 100644
--- a/hw/cadence_gem.c
+++ b/hw/cadence_gem.c
@@ -664,7 +664,7 @@ static ssize_t gem_receive(VLANClientState *nc, const uint8_t *buf, size_t size)
*/
memcpy(rxbuf, buf, size);
- memset(rxbuf + size, 0, sizeof(rxbuf - size));
+ memset(rxbuf + size, 0, sizeof(rxbuf) - size);
rxbuf_ptr = rxbuf;
crc_val = cpu_to_le32(crc32(0, rxbuf, MAX(size, 60)));
if (size < 60) {
diff --git a/hw/cadence_ttc.c b/hw/cadence_ttc.c
index 2b5477b68849ad971521b8e36815cfc0f230c50d..dd02f86eb9809c18a87afd6acaffcd20ad79bf8c 100644
--- a/hw/cadence_ttc.c
+++ b/hw/cadence_ttc.c
@@ -405,7 +405,7 @@ static int cadence_ttc_init(SysBusDevice *dev)
int i;
for (i = 0; i < 3; ++i) {
- cadence_timer_init(2500000, &s->timer[i]);
+ cadence_timer_init(133000000, &s->timer[i]);
sysbus_init_irq(dev, &s->timer[i].irq);
}
diff --git a/hw/exynos4210.c b/hw/exynos4210.c
index dd14d01b015ab73f4088f239af599619c47b1fc8..9c20b3f22dc4b4f650cab8ee7785577bba9c9377 100644
--- a/hw/exynos4210.c
+++ b/hw/exynos4210.c
@@ -97,11 +97,11 @@ void exynos4210_write_secondary(ARMCPU *cpu,
Exynos4210State *exynos4210_init(MemoryRegion *system_mem,
unsigned long ram_size)
{
- qemu_irq cpu_irq[4];
- int n;
+ qemu_irq cpu_irq[EXYNOS4210_NCPUS];
+ int i, n;
Exynos4210State *s = g_new(Exynos4210State, 1);
qemu_irq *irqp;
- qemu_irq gate_irq[EXYNOS4210_IRQ_GATE_NINPUTS];
+ qemu_irq gate_irq[EXYNOS4210_NCPUS][EXYNOS4210_IRQ_GATE_NINPUTS];
unsigned long mem_size;
DeviceState *dev;
SysBusDevice *busdev;
@@ -128,16 +128,18 @@ Exynos4210State *exynos4210_init(MemoryRegion *system_mem,
s->irq_table = exynos4210_init_irq(&s->irqs);
/* IRQ Gate */
- dev = qdev_create(NULL, "exynos4210.irq_gate");
- qdev_init_nofail(dev);
- /* Get IRQ Gate input in gate_irq */
- for (n = 0; n < EXYNOS4210_IRQ_GATE_NINPUTS; n++) {
- gate_irq[n] = qdev_get_gpio_in(dev, n);
- }
- busdev = sysbus_from_qdev(dev);
- /* Connect IRQ Gate output to cpu_irq */
- for (n = 0; n < EXYNOS4210_NCPUS; n++) {
- sysbus_connect_irq(busdev, n, cpu_irq[n]);
+ for (i = 0; i < EXYNOS4210_NCPUS; i++) {
+ dev = qdev_create(NULL, "exynos4210.irq_gate");
+ qdev_prop_set_uint32(dev, "n_in", EXYNOS4210_IRQ_GATE_NINPUTS);
+ qdev_init_nofail(dev);
+ /* Get IRQ Gate input in gate_irq */
+ for (n = 0; n < EXYNOS4210_IRQ_GATE_NINPUTS; n++) {
+ gate_irq[i][n] = qdev_get_gpio_in(dev, n);
+ }
+ busdev = sysbus_from_qdev(dev);
+
+ /* Connect IRQ Gate output to cpu_irq */
+ sysbus_connect_irq(busdev, 0, cpu_irq[i]);
}
/* Private memory region and Internal GIC */
@@ -147,7 +149,7 @@ Exynos4210State *exynos4210_init(MemoryRegion *system_mem,
busdev = sysbus_from_qdev(dev);
sysbus_mmio_map(busdev, 0, EXYNOS4210_SMP_PRIVATE_BASE_ADDR);
for (n = 0; n < EXYNOS4210_NCPUS; n++) {
- sysbus_connect_irq(busdev, n, gate_irq[n * 2]);
+ sysbus_connect_irq(busdev, n, gate_irq[n][0]);
}
for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) {
s->irqs.int_gic_irq[n] = qdev_get_gpio_in(dev, n);
@@ -166,7 +168,7 @@ Exynos4210State *exynos4210_init(MemoryRegion *system_mem,
/* Map Distributer interface */
sysbus_mmio_map(busdev, 1, EXYNOS4210_EXT_GIC_DIST_BASE_ADDR);
for (n = 0; n < EXYNOS4210_NCPUS; n++) {
- sysbus_connect_irq(busdev, n, gate_irq[n * 2 + 1]);
+ sysbus_connect_irq(busdev, n, gate_irq[n][1]);
}
for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) {
s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(dev, n);
diff --git a/hw/exynos4210.h b/hw/exynos4210.h
index b1b46090546a41ec75590c1645816b06d6a209b5..9b1ae4c8b14dab02fb61c05f1c97473beaf23fa9 100644
--- a/hw/exynos4210.h
+++ b/hw/exynos4210.h
@@ -56,7 +56,7 @@
/*
* exynos4210 IRQ subsystem stub definitions.
*/
-#define EXYNOS4210_IRQ_GATE_NINPUTS 8
+#define EXYNOS4210_IRQ_GATE_NINPUTS 2 /* Internal and External GIC */
#define EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ 64
#define EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ 16
diff --git a/hw/exynos4210_gic.c b/hw/exynos4210_gic.c
index e1b215eff04bf4d6ca89350e349e8fe801a3365c..7d03dd9ae3f541cfe4e4794b814791a9417aeb65 100644
--- a/hw/exynos4210_gic.c
+++ b/hw/exynos4210_gic.c
@@ -362,61 +362,64 @@ static void exynos4210_gic_register_types(void)
type_init(exynos4210_gic_register_types)
-/*
- * IRQGate struct.
- * IRQ Gate represents OR gate between GICs to pass IRQ to PIC.
+/* IRQ OR Gate struct.
+ *
+ * This device models an OR gate. There are n_in input qdev gpio lines and one
+ * output sysbus IRQ line. The output IRQ level is formed as OR between all
+ * gpio inputs.
*/
typedef struct {
SysBusDevice busdev;
- qemu_irq pic_irq[EXYNOS4210_NCPUS]; /* output IRQs to PICs */
- uint32_t gpio_level[EXYNOS4210_IRQ_GATE_NINPUTS]; /* Input levels */
+ uint32_t n_in; /* inputs amount */
+ uint32_t *level; /* input levels */
+ qemu_irq out; /* output IRQ */
} Exynos4210IRQGateState;
+static Property exynos4210_irq_gate_properties[] = {
+ DEFINE_PROP_UINT32("n_in", Exynos4210IRQGateState, n_in, 1),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
static const VMStateDescription vmstate_exynos4210_irq_gate = {
.name = "exynos4210.irq_gate",
- .version_id = 1,
- .minimum_version_id = 1,
- .minimum_version_id_old = 1,
+ .version_id = 2,
+ .minimum_version_id = 2,
+ .minimum_version_id_old = 2,
.fields = (VMStateField[]) {
- VMSTATE_UINT32_ARRAY(gpio_level, Exynos4210IRQGateState,
- EXYNOS4210_IRQ_GATE_NINPUTS),
+ VMSTATE_VBUFFER_UINT32(level, Exynos4210IRQGateState, 1, NULL, 0, n_in),
VMSTATE_END_OF_LIST()
}
};
-/* Process a change in an external IRQ input. */
+/* Process a change in IRQ input. */
static void exynos4210_irq_gate_handler(void *opaque, int irq, int level)
{
- Exynos4210IRQGateState *s =
- (Exynos4210IRQGateState *)opaque;
- uint32_t odd, even;
-
- if (irq & 1) {
- odd = irq;
- even = irq & ~1;
- } else {
- even = irq;
- odd = irq | 1;
- }
+ Exynos4210IRQGateState *s = (Exynos4210IRQGateState *)opaque;
+ uint32_t i;
- assert(irq < EXYNOS4210_IRQ_GATE_NINPUTS);
- s->gpio_level[irq] = level;
+ assert(irq < s->n_in);
- if (s->gpio_level[odd] >= 1 || s->gpio_level[even] >= 1) {
- qemu_irq_raise(s->pic_irq[even >> 1]);
- } else {
- qemu_irq_lower(s->pic_irq[even >> 1]);
+ s->level[irq] = level;
+
+ for (i = 0; i < s->n_in; i++) {
+ if (s->level[i] >= 1) {
+ qemu_irq_raise(s->out);
+ return;
+ }
}
+ qemu_irq_lower(s->out);
+
return;
}
static void exynos4210_irq_gate_reset(DeviceState *d)
{
- Exynos4210IRQGateState *s = (Exynos4210IRQGateState *)d;
+ Exynos4210IRQGateState *s =
+ DO_UPCAST(Exynos4210IRQGateState, busdev.qdev, d);
- memset(&s->gpio_level, 0, sizeof(s->gpio_level));
+ memset(s->level, 0, s->n_in * sizeof(*s->level));
}
/*
@@ -424,19 +427,15 @@ static void exynos4210_irq_gate_reset(DeviceState *d)
*/
static int exynos4210_irq_gate_init(SysBusDevice *dev)
{
- unsigned int i;
- Exynos4210IRQGateState *s =
- FROM_SYSBUS(Exynos4210IRQGateState, dev);
+ Exynos4210IRQGateState *s = FROM_SYSBUS(Exynos4210IRQGateState, dev);
/* Allocate general purpose input signals and connect a handler to each of
* them */
- qdev_init_gpio_in(&s->busdev.qdev, exynos4210_irq_gate_handler,
- EXYNOS4210_IRQ_GATE_NINPUTS);
+ qdev_init_gpio_in(&s->busdev.qdev, exynos4210_irq_gate_handler, s->n_in);
- /* Connect SysBusDev irqs to device specific irqs */
- for (i = 0; i < EXYNOS4210_NCPUS; i++) {
- sysbus_init_irq(dev, &s->pic_irq[i]);
- }
+ s->level = g_malloc0(s->n_in * sizeof(*s->level));
+
+ sysbus_init_irq(dev, &s->out);
return 0;
}
@@ -449,6 +448,7 @@ static void exynos4210_irq_gate_class_init(ObjectClass *klass, void *data)
k->init = exynos4210_irq_gate_init;
dc->reset = exynos4210_irq_gate_reset;
dc->vmsd = &vmstate_exynos4210_irq_gate;
+ dc->props = exynos4210_irq_gate_properties;
}
static TypeInfo exynos4210_irq_gate_info = {
diff --git a/hw/omap.h b/hw/omap.h
index 2819e5df9a2bad23635d2336201239f6b021653f..3d98941b72f41c8684379c760625177eeaf0a17d 100644
--- a/hw/omap.h
+++ b/hw/omap.h
@@ -998,7 +998,6 @@ enum {
#define OMAP_GPIOSW_OUTPUT 0x0002
# define TCMI_VERBOSE 1
-//# define MEM_VERBOSE 1
# ifdef TCMI_VERBOSE
# define OMAP_8B_REG(paddr) \
@@ -1018,98 +1017,4 @@ enum {
# define OMAP_MPUI_REG_MASK 0x000007ff
-# ifdef MEM_VERBOSE
-struct io_fn {
- CPUReadMemoryFunc * const *mem_read;
- CPUWriteMemoryFunc * const *mem_write;
- void *opaque;
- int in;
-};
-
-static uint32_t io_readb(void *opaque, target_phys_addr_t addr)
-{
- struct io_fn *s = opaque;
- uint32_t ret;
-
- s->in ++;
- ret = s->mem_read[0](s->opaque, addr);
- s->in --;
- if (!s->in)
- fprintf(stderr, "%08x ---> %02x\n", (uint32_t) addr, ret);
- return ret;
-}
-static uint32_t io_readh(void *opaque, target_phys_addr_t addr)
-{
- struct io_fn *s = opaque;
- uint32_t ret;
-
- s->in ++;
- ret = s->mem_read[1](s->opaque, addr);
- s->in --;
- if (!s->in)
- fprintf(stderr, "%08x ---> %04x\n", (uint32_t) addr, ret);
- return ret;
-}
-static uint32_t io_readw(void *opaque, target_phys_addr_t addr)
-{
- struct io_fn *s = opaque;
- uint32_t ret;
-
- s->in ++;
- ret = s->mem_read[2](s->opaque, addr);
- s->in --;
- if (!s->in)
- fprintf(stderr, "%08x ---> %08x\n", (uint32_t) addr, ret);
- return ret;
-}
-static void io_writeb(void *opaque, target_phys_addr_t addr, uint32_t value)
-{
- struct io_fn *s = opaque;
-
- if (!s->in)
- fprintf(stderr, "%08x <--- %02x\n", (uint32_t) addr, value);
- s->in ++;
- s->mem_write[0](s->opaque, addr, value);
- s->in --;
-}
-static void io_writeh(void *opaque, target_phys_addr_t addr, uint32_t value)
-{
- struct io_fn *s = opaque;
-
- if (!s->in)
- fprintf(stderr, "%08x <--- %04x\n", (uint32_t) addr, value);
- s->in ++;
- s->mem_write[1](s->opaque, addr, value);
- s->in --;
-}
-static void io_writew(void *opaque, target_phys_addr_t addr, uint32_t value)
-{
- struct io_fn *s = opaque;
-
- if (!s->in)
- fprintf(stderr, "%08x <--- %08x\n", (uint32_t) addr, value);
- s->in ++;
- s->mem_write[2](s->opaque, addr, value);
- s->in --;
-}
-
-static CPUReadMemoryFunc * const io_readfn[] = { io_readb, io_readh, io_readw, };
-static CPUWriteMemoryFunc * const io_writefn[] = { io_writeb, io_writeh, io_writew, };
-
-inline static int debug_register_io_memory(CPUReadMemoryFunc * const *mem_read,
- CPUWriteMemoryFunc * const *mem_write,
- void *opaque)
-{
- struct io_fn *s = g_malloc(sizeof(struct io_fn));
-
- s->mem_read = mem_read;
- s->mem_write = mem_write;
- s->opaque = opaque;
- s->in = 0;
- return cpu_register_io_memory(io_readfn, io_writefn, s,
- DEVICE_NATIVE_ENDIAN);
-}
-# define cpu_register_io_memory debug_register_io_memory
-# endif
-
#endif /* hw_omap_h */