提交 69135b5c 编写于 作者: B bellard

suppressed pci2isa.c


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@819 c046a42c-6fe2-441c-8c8c-71466251a162
上级 69b91039
......@@ -232,7 +232,7 @@ ifeq ($(ARCH),alpha)
endif
# must use static linking to avoid leaving stuff in virtual address space
VL_OBJS=vl.o osdep.o block.o monitor.o pci.o pci2isa.o
VL_OBJS=vl.o osdep.o block.o monitor.o pci.o
ifeq ($(TARGET_ARCH), i386)
# Hardware support
......
/*
* QEMU PCI to ISA bridge
*
* Copyright (c) 2004 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "vl.h"
//#define DEBUG_PCI
typedef struct PIIX3State {
PCIDevice dev;
uint8_t elcr1;
uint8_t elcr2;
} PIIX3State;
static void piix3_reset(PIIX3State *d)
{
uint8_t *pci_conf = d->dev.config;
pci_conf[0x04] = 0x07; // master, memory and I/O
pci_conf[0x05] = 0x00;
pci_conf[0x06] = 0x00;
pci_conf[0x07] = 0x02; // PCI_status_devsel_medium
pci_conf[0x4c] = 0x4d;
pci_conf[0x4e] = 0x03;
pci_conf[0x4f] = 0x00;
pci_conf[0x60] = 0x80;
pci_conf[0x69] = 0x02;
pci_conf[0x70] = 0x80;
pci_conf[0x76] = 0x0c;
pci_conf[0x77] = 0x0c;
pci_conf[0x78] = 0x02;
pci_conf[0x79] = 0x00;
pci_conf[0x80] = 0x00;
pci_conf[0x82] = 0x00;
pci_conf[0xa0] = 0x08;
pci_conf[0xa0] = 0x08;
pci_conf[0xa2] = 0x00;
pci_conf[0xa3] = 0x00;
pci_conf[0xa4] = 0x00;
pci_conf[0xa5] = 0x00;
pci_conf[0xa6] = 0x00;
pci_conf[0xa7] = 0x00;
pci_conf[0xa8] = 0x0f;
pci_conf[0xaa] = 0x00;
pci_conf[0xab] = 0x00;
pci_conf[0xac] = 0x00;
pci_conf[0xae] = 0x00;
d->elcr1 = 0x00;
d->elcr2 = 0x00;
}
static uint32_t piix3_read_config(PCIDevice *d,
uint32_t address, int len)
{
uint32_t val;
val = 0;
memcpy(&val, d->config + address, len);
return val;
}
static void piix3_write_config(PCIDevice *d,
uint32_t address, uint32_t val, int len)
{
memcpy(d->config + address, &val, len);
}
void piix3_init(void)
{
PIIX3State *d;
uint8_t *pci_conf;
d = (PIIX3State *)pci_register_device("PIIX3", sizeof(PIIX3State),
0, -1,
piix3_read_config,
piix3_write_config);
pci_conf = d->dev.config;
pci_conf[0x00] = 0x86; // Intel
pci_conf[0x01] = 0x80;
pci_conf[0x02] = 0x00; // 82371SB PIIX3 PCI-to-ISA bridge (Step A1)
pci_conf[0x03] = 0x70;
pci_conf[0x0a] = 0x01; // class_sub = PCI_ISA
pci_conf[0x0b] = 0x06; // class_base = PCI_bridge
pci_conf[0x0e] = 0x80; // header_type = PCI_multifunction, generic
piix3_reset(d);
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册