From 6550f2e676959bd9507ae311ca8df0b1939e77f3 Mon Sep 17 00:00:00 2001 From: Artyom Tarasenko Date: Tue, 13 Oct 2009 23:46:24 +0200 Subject: [PATCH] scsi disk block descriptor v2 The SCSI-2 documentation suggests, that although the block descriptor is optional for an arbitrary SCSI-2 device (chapter 8.2.10, http://ldkelley.com/SCSI2/SCSI2/SCSI2/SCSI2/SCSI2-08.html ) it is mandatory for a disk: chapters 9.1.2, 9.3.3 ( http://ldkelley.com/SCSI2/SCSI2/SCSI2/SCSI2-09.html ) don't say "optional" any more, just "The block descriptor in the MODE SENSE data describes the block lengths that are used on the medium." v2: limit the number of sectors reported in the block descriptor to 24 bits. Signed-off-by: Artyom Tarasenko Signed-off-by: Blue Swirl --- hw/scsi-disk.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c index 3940726f2b..2a9268aa63 100644 --- a/hw/scsi-disk.c +++ b/hw/scsi-disk.c @@ -624,7 +624,9 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag, { uint8_t *p; int page; - + int dbd; + + dbd = buf[1] & 0x8; page = buf[2] & 0x3f; DPRINTF("Mode Sense (page %d, len %d)\n", page, len); p = outbuf; @@ -635,6 +637,24 @@ static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag, outbuf[2] = 0x80; /* Readonly. */ } p += 4; + bdrv_get_geometry(s->dinfo->bdrv, &nb_sectors); + if ((~dbd) & nb_sectors) { + nb_sectors /= s->cluster_size; + nb_sectors--; + if (nb_sectors > 0xffffff) + nb_sectors = 0xffffff; + outbuf[3] = 8; /* Block descriptor length */ + p[0] = 0; /* media density code */ + p[1] = (nb_sectors >> 16) & 0xff; + p[2] = (nb_sectors >> 8) & 0xff; + p[3] = nb_sectors & 0xff; + p[4] = 0; /* reserved */ + p[5] = 0; /* bytes 5-7 are the sector size in bytes */ + p[6] = s->cluster_size * 2; + p[7] = 0; + p += 8; + } + if (page == 4) { int cylinders, heads, secs; -- GitLab