Skip to content

Q
qemu

openeuler / qemu

通知 10
Star 0
Fork 0
Q
qemu

体验新版 GitCode，发现更多精彩内容 >>

提交 4b4f782c 编写于 作者: B bellard
浏览文件
操作

NX support 


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1677 c046a42c-6fe2-441c-8c8c-71466251a162
上级 84b7b8e7
显示空白变更内容
内联 并排
Showing with 120 addition and 40 deletion
target-i386/helper2.c
浏览文件 @ 4b4f782c
......@@ -127,7 +127,7 @@ CPUX86State *cpu_x86_init(void)
/* currently not enabled for std i386 because not fully tested */
env->cpuid_features |= CPUID_APIC;
env->cpuid_ext2_features = (env->cpuid_features & 0x0183F3FF);
env->cpuid_ext2_features |= CPUID_EXT2_LM | CPUID_EXT2_SYSCALL;
env->cpuid_ext2_features |= CPUID_EXT2_LM | CPUID_EXT2_SYSCALL | CPUID_EXT2_NX;
env->cpuid_xlevel = 0x80000008;
/* these features are needed for Win64 and aren't fully implemented */
......@@ -576,6 +576,8 @@ target_ulong cpu_get_phys_page_debug(CPUState *env, target_ulong addr)
#else
#define PHYS_ADDR_MASK 0xfffff000
/* return value:
-1 = cannot handle fault
0 = nothing more to do
......@@ -583,37 +585,38 @@ target_ulong cpu_get_phys_page_debug(CPUState *env, target_ulong addr)
2 = soft MMU activation required for this block
*/
int cpu_x86_handle_mmu_fault(CPUX86State *env, target_ulong addr,
int is_write, int is_user, int is_softmmu)
int is_write1, int is_user, int is_softmmu)
{
uint64_t ptep, pte;
uint32_t pdpe_addr, pde_addr, pte_addr;
uint32_t pde, pte, ptep, pdpe;
int error_code, is_dirty, prot, page_size, ret;
int error_code, is_dirty, prot, page_size, ret, is_write;
unsigned long paddr, page_offset;
target_ulong vaddr, virt_addr;
#if defined(DEBUG_MMU)
printf("MMU fault: addr=" TARGET_FMT_lx " w=%d u=%d eip=" TARGET_FMT_lx "\n",
addr, is_write, is_user, env->eip);
addr, is_write1, is_user, env->eip);
#endif
is_write &= 1;
is_write = is_write1 & 1;
if (!(env->cr[0] & CR0_PG_MASK)) {
pte = addr;
virt_addr = addr & TARGET_PAGE_MASK;
prot = PAGE_READ | PAGE_WRITE;
prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC;
page_size = 4096;
goto do_mapping;
}
if (env->cr[4] & CR4_PAE_MASK) {
uint64_t pde, pdpe;
/* XXX: we only use 32 bit physical addresses */
#ifdef TARGET_X86_64
if (env->hflags & HF_LMA_MASK) {
uint32_t pml4e_addr, pml4e;
uint32_t pml4e_addr;
uint64_t pml4e;
int32_t sext;
/* XXX: handle user + rw rights */
/* XXX: handle NX flag */
/* test virtual address sign extension */
sext = (int64_t)addr >> 47;
if (sext != 0 && sext != -1) {
......@@ -623,23 +626,32 @@ int cpu_x86_handle_mmu_fault(CPUX86State *env, target_ulong addr,
pml4e_addr = ((env->cr[3] & ~0xfff) + (((addr >> 39) & 0x1ff) << 3)) &
env->a20_mask;
pml4e = ldl_phys(pml4e_addr);
pml4e = ldq_phys(pml4e_addr);
if (!(pml4e & PG_PRESENT_MASK)) {
error_code = 0;
goto do_fault;
}
if (!(env->efer & MSR_EFER_NXE) && (pml4e & PG_NX_MASK)) {
error_code = PG_ERROR_RSVD_MASK;
goto do_fault;
}
if (!(pml4e & PG_ACCESSED_MASK)) {
pml4e |= PG_ACCESSED_MASK;
stl_phys_notdirty(pml4e_addr, pml4e);
}
pdpe_addr = ((pml4e & ~0xfff) + (((addr >> 30) & 0x1ff) << 3)) &
ptep = pml4e ^ PG_NX_MASK;
pdpe_addr = ((pml4e & PHYS_ADDR_MASK) + (((addr >> 30) & 0x1ff) << 3)) &
env->a20_mask;
pdpe = ldl_phys(pdpe_addr);
pdpe = ldq_phys(pdpe_addr);
if (!(pdpe & PG_PRESENT_MASK)) {
error_code = 0;
goto do_fault;
}
if (!(env->efer & MSR_EFER_NXE) && (pdpe & PG_NX_MASK)) {
error_code = PG_ERROR_RSVD_MASK;
goto do_fault;
}
ptep &= pdpe ^ PG_NX_MASK;
if (!(pdpe & PG_ACCESSED_MASK)) {
pdpe |= PG_ACCESSED_MASK;
stl_phys_notdirty(pdpe_addr, pdpe);
......@@ -647,37 +659,101 @@ int cpu_x86_handle_mmu_fault(CPUX86State *env, target_ulong addr,
} else
#endif
{
/* XXX: load them when cr3 is loaded ? */
pdpe_addr = ((env->cr[3] & ~0x1f) + ((addr >> 30) << 3)) &
env->a20_mask;
pdpe = ldl_phys(pdpe_addr);
pdpe = ldq_phys(pdpe_addr);
if (!(pdpe & PG_PRESENT_MASK)) {
error_code = 0;
goto do_fault;
}
ptep = PG_NX_MASK | PG_USER_MASK | PG_RW_MASK;
}
pde_addr = ((pdpe & ~0xfff) + (((addr >> 21) & 0x1ff) << 3)) &
pde_addr = ((pdpe & PHYS_ADDR_MASK) + (((addr >> 21) & 0x1ff) << 3)) &
env->a20_mask;
pde = ldl_phys(pde_addr);
pde = ldq_phys(pde_addr);
if (!(pde & PG_PRESENT_MASK)) {
error_code = 0;
goto do_fault;
}
if (!(env->efer & MSR_EFER_NXE) && (pde & PG_NX_MASK)) {
error_code = PG_ERROR_RSVD_MASK;
goto do_fault;
}
ptep &= pde ^ PG_NX_MASK;
if (pde & PG_PSE_MASK) {
/* 2 MB page */
page_size = 2048 * 1024;
goto handle_big_page;
ptep ^= PG_NX_MASK;
if ((ptep & PG_NX_MASK) && is_write1 == 2)
goto do_fault_protect;
if (is_user) {
if (!(ptep & PG_USER_MASK))
goto do_fault_protect;
if (is_write && !(ptep & PG_RW_MASK))
goto do_fault_protect;
} else {
if ((env->cr[0] & CR0_WP_MASK) &&
is_write && !(ptep & PG_RW_MASK))
goto do_fault_protect;
}
is_dirty = is_write && !(pde & PG_DIRTY_MASK);
if (!(pde & PG_ACCESSED_MASK) || is_dirty) {
pde |= PG_ACCESSED_MASK;
if (is_dirty)
pde |= PG_DIRTY_MASK;
stl_phys_notdirty(pde_addr, pde);
}
/* align to page_size */
pte = pde & ((PHYS_ADDR_MASK & ~(page_size - 1)) | 0xfff);
virt_addr = addr & ~(page_size - 1);
} else {
/* 4 KB page */
if (!(pde & PG_ACCESSED_MASK)) {
pde |= PG_ACCESSED_MASK;
stl_phys_notdirty(pde_addr, pde);
}
pte_addr = ((pde & ~0xfff) + (((addr >> 12) & 0x1ff) << 3)) &
pte_addr = ((pde & PHYS_ADDR_MASK) + (((addr >> 12) & 0x1ff) << 3)) &
env->a20_mask;
goto handle_4k_page;
pte = ldq_phys(pte_addr);
if (!(pte & PG_PRESENT_MASK)) {
error_code = 0;
goto do_fault;
}
if (!(env->efer & MSR_EFER_NXE) && (pte & PG_NX_MASK)) {
error_code = PG_ERROR_RSVD_MASK;
goto do_fault;
}
/* combine pde and pte nx, user and rw protections */
ptep &= pte ^ PG_NX_MASK;
ptep ^= PG_NX_MASK;
if ((ptep & PG_NX_MASK) && is_write1 == 2)
goto do_fault_protect;
if (is_user) {
if (!(ptep & PG_USER_MASK))
goto do_fault_protect;
if (is_write && !(ptep & PG_RW_MASK))
goto do_fault_protect;
} else {
if ((env->cr[0] & CR0_WP_MASK) &&
is_write && !(ptep & PG_RW_MASK))
goto do_fault_protect;
}
is_dirty = is_write && !(pte & PG_DIRTY_MASK);
if (!(pte & PG_ACCESSED_MASK) || is_dirty) {
pte |= PG_ACCESSED_MASK;
if (is_dirty)
pte |= PG_DIRTY_MASK;
stl_phys_notdirty(pte_addr, pte);
}
page_size = 4096;
virt_addr = addr & ~0xfff;
pte = pte & (PHYS_ADDR_MASK | 0xfff);
}
} else {
uint32_t pde;
/* page directory entry */
pde_addr = ((env->cr[3] & ~0xfff) + ((addr >> 20) & ~3)) &
env->a20_mask;
......@@ -689,7 +765,6 @@ int cpu_x86_handle_mmu_fault(CPUX86State *env, target_ulong addr,
/* if PSE bit is set, then we use a 4MB page */
if ((pde & PG_PSE_MASK) && (env->cr[4] & CR4_PSE_MASK)) {
page_size = 4096 * 1024;
handle_big_page:
if (is_user) {
if (!(pde & PG_USER_MASK))
goto do_fault_protect;
......@@ -720,7 +795,6 @@ int cpu_x86_handle_mmu_fault(CPUX86State *env, target_ulong addr,
/* page directory entry */
pte_addr = ((pde & ~0xfff) + ((addr >> 10) & 0xffc)) &
env->a20_mask;
handle_4k_page:
pte = ldl_phys(pte_addr);
if (!(pte & PG_PRESENT_MASK)) {
error_code = 0;
......@@ -748,9 +822,11 @@ int cpu_x86_handle_mmu_fault(CPUX86State *env, target_ulong addr,
page_size = 4096;
virt_addr = addr & ~0xfff;
}
}
/* the page can be put in the TLB */
prot = PAGE_READ;
if (!(ptep & PG_NX_MASK))
prot |= PAGE_EXEC;
if (pte & PG_DIRTY_MASK) {
/* only set write access if already dirty... otherwise wait
for dirty access */
......@@ -763,7 +839,6 @@ int cpu_x86_handle_mmu_fault(CPUX86State *env, target_ulong addr,
prot |= PAGE_WRITE;
}
}
}
do_mapping:
pte = pte & env->a20_mask;
......@@ -773,15 +848,20 @@ int cpu_x86_handle_mmu_fault(CPUX86State *env, target_ulong addr,
paddr = (pte & TARGET_PAGE_MASK) + page_offset;
vaddr = virt_addr + page_offset;
ret = tlb_set_page(env, vaddr, paddr, prot, is_user, is_softmmu);
ret = tlb_set_page_exec(env, vaddr, paddr, prot, is_user, is_softmmu);
return ret;
do_fault_protect:
error_code = PG_ERROR_P_MASK;
do_fault:
env->cr[2] = addr;
env->error_code = (is_write << PG_ERROR_W_BIT) | error_code;
error_code |= (is_write << PG_ERROR_W_BIT);
if (is_user)
env->error_code |= PG_ERROR_U_MASK;
error_code |= PG_ERROR_U_MASK;
if (is_write1 == 2 &&
(env->efer & MSR_EFER_NXE) &&
(env->cr[4] & CR4_PAE_MASK))
error_code |= PG_ERROR_I_D_MASK;
env->error_code = error_code;
return 1;
}
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或