apb: move the two secondary PCI bridges objects into APBState

This enables us to remove these parameters from pci_apb_init().
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>

hw/pci-host/apb.c

@@ -612,8 +612,7 @@ static void apb_pci_bridge_realize(PCIDevice *dev, Error **errp)
 }
 
 APBState *pci_apb_init(hwaddr special_base,
-                       hwaddr mem_base,
-                       PCIBus **busA, PCIBus **busB)
+                       hwaddr mem_base)
 {
     DeviceState *dev;
     SysBusDevice *s;
@@ -621,7 +620,6 @@ APBState *pci_apb_init(hwaddr special_base,
     APBState *d;
     IOMMUState *is;
     PCIDevice *pci_dev;
-    PCIBridge *br;
 
     /* Ultrasparc PBM main bus */
     dev = qdev_create(NULL, TYPE_APB);
@@ -659,18 +657,16 @@ APBState *pci_apb_init(hwaddr special_base,
     /* APB secondary busses */
     pci_dev = pci_create_multifunction(phb->bus, PCI_DEVFN(1, 0), true,
                                    TYPE_PBM_PCI_BRIDGE);
-    br = PCI_BRIDGE(pci_dev);
-    pci_bridge_map_irq(br, "pciB", pci_pbm_map_irq);
+    d->bridgeB = PCI_BRIDGE(pci_dev);
+    pci_bridge_map_irq(d->bridgeB, "pciB", pci_pbm_map_irq);
     qdev_init_nofail(&pci_dev->qdev);
-    *busB = pci_bridge_get_sec_bus(br);
 
     pci_dev = pci_create_multifunction(phb->bus, PCI_DEVFN(1, 1), true,
                                    TYPE_PBM_PCI_BRIDGE);
-    br = PCI_BRIDGE(pci_dev);
-    pci_bridge_map_irq(br, "pciA", pci_pbm_map_irq);
+    d->bridgeA = PCI_BRIDGE(pci_dev);
+    pci_bridge_map_irq(d->bridgeA, "pciA", pci_pbm_map_irq);
     qdev_prop_set_bit(DEVICE(pci_dev), "busA", true);
     qdev_init_nofail(&pci_dev->qdev);
-    *busA = pci_bridge_get_sec_bus(br);
 
     return d;
 }

hw/sparc64/sun4u.c

@@ -27,6 +27,7 @@
 #include "cpu.h"
 #include "hw/hw.h"
 #include "hw/pci/pci.h"
+#include "hw/pci/pci_bridge.h"
 #include "hw/pci/pci_bus.h"
 #include "hw/pci-host/apb.h"
 #include "hw/i386/pc.h"
@@ -501,7 +502,7 @@ static void sun4uv_init(MemoryRegion *address_space_mem,
 
     prom_init(hwdef->prom_addr, bios_name);
 
-    apb = pci_apb_init(APB_SPECIAL_BASE, APB_MEM_BASE, &pci_busA, &pci_busB);
+    apb = pci_apb_init(APB_SPECIAL_BASE, APB_MEM_BASE);
 
     /* Wire up PCI interrupts to CPU */
     for (i = 0; i < IVEC_MAX; i++) {
@@ -510,6 +511,8 @@ static void sun4uv_init(MemoryRegion *address_space_mem,
     }
 
     pci_bus = PCI_HOST_BRIDGE(apb)->bus;
+    pci_busA = pci_bridge_get_sec_bus(apb->bridgeA);
+    pci_busB = pci_bridge_get_sec_bus(apb->bridgeB);
 
     /* Only in-built Simba PBMs can exist on the root bus, slot 0 on busA is
        reserved (leaving no slots free after on-board devices) however slots

include/hw/pci-host/apb.h

@@ -68,6 +68,8 @@ typedef struct APBState {
     MemoryRegion pci_ioport;
     uint64_t pci_irq_in;
     IOMMUState iommu;
+    PCIBridge *bridgeA;
+    PCIBridge *bridgeB;
     uint32_t pci_control[16];
     uint32_t pci_irq_map[8];
     uint32_t pci_err_irq_map[4];
@@ -92,6 +94,5 @@ typedef struct PBMPCIBridge {
     OBJECT_CHECK(PBMPCIBridge, (obj), TYPE_PBM_PCI_BRIDGE)
 
 APBState *pci_apb_init(hwaddr special_base,
-                       hwaddr mem_base,
-                       PCIBus **bus2, PCIBus **bus3);
+                       hwaddr mem_base);
 #endif