提交 3031efab 编写于 作者: S Stefan Weil 提交者: Aurelien Jarno

eepro100: Remove unused device status entries

A lot of entries are unused (they were added by copy + paste
from other drivers during development of eepro100.c).

Removing them from nic_save, nic_load makes any
old saved status incompatible, so a new version
for the virtual machine data was needed, too.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
上级 1b050077
......@@ -190,19 +190,6 @@ typedef struct {
uint8_t cmd;
uint32_t start;
uint32_t stop;
uint8_t boundary;
uint8_t tsr;
uint8_t tpsr;
uint16_t tcnt;
uint16_t rcnt;
uint32_t rsar;
uint8_t rsr;
uint8_t rxcr;
uint8_t isr;
uint8_t dcfg;
uint8_t imr;
uint8_t phys[6]; /* mac address */
uint8_t curpag;
uint8_t mult[8]; /* multicast mask array */
int mmio_index;
VLANClientState *vc;
......@@ -211,7 +198,6 @@ typedef struct {
uint8_t int_stat; /* PCI interrupt status */
uint32_t region[3]; /* PCI region addresses */
uint8_t macaddr[6];
uint32_t statcounter[19];
uint16_t mdimem[32];
eeprom_t *eeprom;
uint32_t device; /* device variant */
......@@ -223,7 +209,8 @@ typedef struct {
uint32_t ru_base; /* RU base address */
uint32_t ru_offset; /* RU address offset */
uint32_t statsaddr; /* pointer to eepro100_stats_t */
eepro100_stats_t statistics; /* statistical counters */
/* Statistical counters. Also used for wake-up packet (i82559). */
eepro100_stats_t statistics;
#if 0
uint16_t status;
#endif
......@@ -235,6 +222,10 @@ typedef struct {
uint8_t mem[PCI_MEM_SIZE];
} EEPRO100State;
/* Parameters for nic_save, nic_load. */
static const int eepro100_instance = -1;
static const int eepro100_version = 20090807;
/* Default values for MDI (PHY) registers */
static const uint16_t eepro100_mdi_default[] = {
/* MDI Registers 0 - 6, 7 */
......@@ -1583,50 +1574,29 @@ static int nic_load(QEMUFile * f, void *opaque, int version_id)
int i;
int ret;
if (version_id > 3)
if (version_id != eepro100_version) {
return -EINVAL;
}
if (version_id >= 3) {
ret = pci_device_load(&s->dev, f);
if (ret < 0)
if (ret < 0) {
return ret;
}
if (version_id >= 2) {
qemu_get_8s(f, &s->rxcr);
} else {
s->rxcr = 0x0c;
}
qemu_get_8s(f, &s->cmd);
qemu_get_be32s(f, &s->start);
qemu_get_be32s(f, &s->stop);
qemu_get_8s(f, &s->boundary);
qemu_get_8s(f, &s->tsr);
qemu_get_8s(f, &s->tpsr);
qemu_get_be16s(f, &s->tcnt);
qemu_get_be16s(f, &s->rcnt);
qemu_get_be32s(f, &s->rsar);
qemu_get_8s(f, &s->rsr);
qemu_get_8s(f, &s->isr);
qemu_get_8s(f, &s->dcfg);
qemu_get_8s(f, &s->imr);
qemu_get_buffer(f, s->phys, 6);
qemu_get_8s(f, &s->curpag);
qemu_get_buffer(f, s->mult, 8);
qemu_get_buffer(f, s->mem, sizeof(s->mem));
/* Restore all members of struct between scv_stat and mem. */
qemu_get_8s(f, &s->scb_stat);
qemu_get_8s(f, &s->int_stat);
for (i = 0; i < 3; i++) {
for (i = 0; i < ARRAY_SIZE(s->region); i++) {
qemu_get_be32s(f, &s->region[i]);
}
qemu_get_buffer(f, s->macaddr, 6);
for (i = 0; i < 19; i++) {
qemu_get_be32s(f, &s->statcounter[i]);
}
for (i = 0; i < 32; i++) {
for (i = 0; i < ARRAY_SIZE(s->mdimem); i++) {
qemu_get_be16s(f, &s->mdimem[i]);
}
/* The eeprom should be saved and restored by its own routines. */
......@@ -1677,37 +1647,20 @@ static void nic_save(QEMUFile * f, void *opaque)
pci_device_save(&s->dev, f);
qemu_put_8s(f, &s->rxcr);
qemu_put_8s(f, &s->cmd);
qemu_put_be32s(f, &s->start);
qemu_put_be32s(f, &s->stop);
qemu_put_8s(f, &s->boundary);
qemu_put_8s(f, &s->tsr);
qemu_put_8s(f, &s->tpsr);
qemu_put_be16s(f, &s->tcnt);
qemu_put_be16s(f, &s->rcnt);
qemu_put_be32s(f, &s->rsar);
qemu_put_8s(f, &s->rsr);
qemu_put_8s(f, &s->isr);
qemu_put_8s(f, &s->dcfg);
qemu_put_8s(f, &s->imr);
qemu_put_buffer(f, s->phys, 6);
qemu_put_8s(f, &s->curpag);
qemu_put_buffer(f, s->mult, 8);
qemu_put_buffer(f, s->mem, sizeof(s->mem));
/* Save all members of struct between scv_stat and mem. */
qemu_put_8s(f, &s->scb_stat);
qemu_put_8s(f, &s->int_stat);
for (i = 0; i < 3; i++) {
for (i = 0; i < ARRAY_SIZE(s->region); i++) {
qemu_put_be32s(f, &s->region[i]);
}
qemu_put_buffer(f, s->macaddr, 6);
for (i = 0; i < 19; i++) {
qemu_put_be32s(f, &s->statcounter[i]);
}
for (i = 0; i < 32; i++) {
for (i = 0; i < ARRAY_SIZE(s->mdimem); i++) {
qemu_put_be16s(f, &s->mdimem[i]);
}
/* The eeprom should be saved and restored by its own routines. */
......@@ -1810,7 +1763,8 @@ static int nic_init(PCIDevice *pci_dev, uint32_t device)
qemu_register_reset(nic_reset, s);
register_savevm(s->vc->model, -1, 3, nic_save, nic_load, s);
register_savevm(s->vc->model, eepro100_instance, eepro100_version,
nic_save, nic_load, s);
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册