pci.c 41.7 KB
Newer Older
B
bellard 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
/*
 * QEMU PCI bus manager
 *
 * Copyright (c) 2004 Fabrice Bellard
 * 
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */
#include "vl.h"

//#define DEBUG_PCI

28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
#define PCI_VENDOR_ID		0x00	/* 16 bits */
#define PCI_DEVICE_ID		0x02	/* 16 bits */
#define PCI_COMMAND		0x04	/* 16 bits */
#define  PCI_COMMAND_IO		0x1	/* Enable response in I/O space */
#define  PCI_COMMAND_MEMORY	0x2	/* Enable response in Memory space */
#define PCI_CLASS_DEVICE        0x0a    /* Device class */
#define PCI_INTERRUPT_LINE	0x3c	/* 8 bits */
#define PCI_INTERRUPT_PIN	0x3d	/* 8 bits */
#define PCI_MIN_GNT		0x3e	/* 8 bits */
#define PCI_MAX_LAT		0x3f	/* 8 bits */

/* just used for simpler irq handling. */
#define PCI_DEVICES_MAX 64
#define PCI_IRQ_WORDS   ((PCI_DEVICES_MAX + 31) / 32)

B
bellard 已提交
43 44 45 46 47
typedef struct PCIBridge {
    uint32_t config_reg;
    PCIDevice **pci_bus[256];
} PCIBridge;

B
bellard 已提交
48
static PCIBridge pci_bridge[3];
B
bellard 已提交
49
target_phys_addr_t pci_mem_base;
50 51
static int pci_irq_index;
static uint32_t pci_irq_levels[4][PCI_IRQ_WORDS];
B
bellard 已提交
52 53 54 55 56 57 58

/* -1 for devfn means auto assign */
PCIDevice *pci_register_device(const char *name, int instance_size,
                               int bus_num, int devfn,
                               PCIConfigReadFunc *config_read, 
                               PCIConfigWriteFunc *config_write)
{
B
bellard 已提交
59
    PCIBridge *s = &pci_bridge[0];
B
bellard 已提交
60 61
    PCIDevice *pci_dev, **bus;

62 63 64
    if (pci_irq_index >= PCI_DEVICES_MAX)
        return NULL;
    
B
bellard 已提交
65 66 67 68 69 70 71 72
    if (!s->pci_bus[bus_num]) {
        s->pci_bus[bus_num] = qemu_mallocz(256 * sizeof(PCIDevice *));
        if (!s->pci_bus[bus_num])
            return NULL;
    }
    bus = s->pci_bus[bus_num];
    if (devfn < 0) {
        for(devfn = 0 ; devfn < 256; devfn += 8) {
B
bellard 已提交
73 74 75 76
#ifdef TARGET_PPC
            if ((devfn >> 3) < 11)
                continue;
#endif
B
bellard 已提交
77 78 79 80 81 82 83 84 85 86 87 88
            if (!bus[devfn])
                goto found;
        }
        return NULL;
    found: ;
    }
    pci_dev = qemu_mallocz(instance_size);
    if (!pci_dev)
        return NULL;
    pci_dev->bus_num = bus_num;
    pci_dev->devfn = devfn;
    pstrcpy(pci_dev->name, sizeof(pci_dev->name), name);
89 90 91 92 93

    if (!config_read)
        config_read = pci_default_read_config;
    if (!config_write)
        config_write = pci_default_write_config;
B
bellard 已提交
94 95
    pci_dev->config_read = config_read;
    pci_dev->config_write = config_write;
96
    pci_dev->irq_index = pci_irq_index++;
B
bellard 已提交
97 98 99 100 101 102 103 104 105 106
    bus[devfn] = pci_dev;
    return pci_dev;
}

void pci_register_io_region(PCIDevice *pci_dev, int region_num, 
                            uint32_t size, int type, 
                            PCIMapIORegionFunc *map_func)
{
    PCIIORegion *r;

107
    if ((unsigned int)region_num >= PCI_NUM_REGIONS)
B
bellard 已提交
108 109 110 111 112 113 114 115
        return;
    r = &pci_dev->io_regions[region_num];
    r->addr = -1;
    r->size = size;
    r->type = type;
    r->map_func = map_func;
}

116
static void pci_addr_writel(void* opaque, uint32_t addr, uint32_t val)
B
bellard 已提交
117 118 119 120 121
{
    PCIBridge *s = opaque;
    s->config_reg = val;
}

122
static uint32_t pci_addr_readl(void* opaque, uint32_t addr)
B
bellard 已提交
123 124 125 126 127
{
    PCIBridge *s = opaque;
    return s->config_reg;
}

128 129 130 131
static void pci_update_mappings(PCIDevice *d)
{
    PCIIORegion *r;
    int cmd, i;
132
    uint32_t last_addr, new_addr, config_ofs;
133 134
    
    cmd = le16_to_cpu(*(uint16_t *)(d->config + PCI_COMMAND));
135
    for(i = 0; i < PCI_NUM_REGIONS; i++) {
136
        r = &d->io_regions[i];
137 138 139 140 141
        if (i == PCI_ROM_SLOT) {
            config_ofs = 0x30;
        } else {
            config_ofs = 0x10 + i * 4;
        }
142 143 144 145
        if (r->size != 0) {
            if (r->type & PCI_ADDRESS_SPACE_IO) {
                if (cmd & PCI_COMMAND_IO) {
                    new_addr = le32_to_cpu(*(uint32_t *)(d->config + 
146
                                                         config_ofs));
147 148 149 150 151 152 153 154 155 156 157 158 159
                    new_addr = new_addr & ~(r->size - 1);
                    last_addr = new_addr + r->size - 1;
                    /* NOTE: we have only 64K ioports on PC */
                    if (last_addr <= new_addr || new_addr == 0 ||
                        last_addr >= 0x10000) {
                        new_addr = -1;
                    }
                } else {
                    new_addr = -1;
                }
            } else {
                if (cmd & PCI_COMMAND_MEMORY) {
                    new_addr = le32_to_cpu(*(uint32_t *)(d->config + 
160 161 162 163
                                                         config_ofs));
                    /* the ROM slot has a specific enable bit */
                    if (i == PCI_ROM_SLOT && !(new_addr & 1))
                        goto no_mem_map;
164 165 166 167 168 169 170 171 172 173 174
                    new_addr = new_addr & ~(r->size - 1);
                    last_addr = new_addr + r->size - 1;
                    /* NOTE: we do not support wrapping */
                    /* XXX: as we cannot support really dynamic
                       mappings, we handle specific values as invalid
                       mappings. */
                    if (last_addr <= new_addr || new_addr == 0 ||
                        last_addr == -1) {
                        new_addr = -1;
                    }
                } else {
175
                no_mem_map:
176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208
                    new_addr = -1;
                }
            }
            /* now do the real mapping */
            if (new_addr != r->addr) {
                if (r->addr != -1) {
                    if (r->type & PCI_ADDRESS_SPACE_IO) {
                        int class;
                        /* NOTE: specific hack for IDE in PC case:
                           only one byte must be mapped. */
                        class = d->config[0x0a] | (d->config[0x0b] << 8);
                        if (class == 0x0101 && r->size == 4) {
                            isa_unassign_ioport(r->addr + 2, 1);
                        } else {
                            isa_unassign_ioport(r->addr, r->size);
                        }
                    } else {
                        cpu_register_physical_memory(r->addr + pci_mem_base, 
                                                     r->size, 
                                                     IO_MEM_UNASSIGNED);
                    }
                }
                r->addr = new_addr;
                if (r->addr != -1) {
                    r->map_func(d, i, r->addr, r->size, r->type);
                }
            }
        }
    }
}

uint32_t pci_default_read_config(PCIDevice *d, 
                                 uint32_t address, int len)
B
bellard 已提交
209
{
210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229
    uint32_t val;
    switch(len) {
    case 1:
        val = d->config[address];
        break;
    case 2:
        val = le16_to_cpu(*(uint16_t *)(d->config + address));
        break;
    default:
    case 4:
        val = le32_to_cpu(*(uint32_t *)(d->config + address));
        break;
    }
    return val;
}

void pci_default_write_config(PCIDevice *d, 
                              uint32_t address, uint32_t val, int len)
{
    int can_write, i;
B
bellard 已提交
230
    uint32_t end, addr;
231

232 233
    if (len == 4 && ((address >= 0x10 && address < 0x10 + 4 * 6) || 
                     (address >= 0x30 && address < 0x34))) {
234 235 236
        PCIIORegion *r;
        int reg;

237 238 239 240 241
        if ( address >= 0x30 ) {
            reg = PCI_ROM_SLOT;
        }else{
            reg = (address - 0x10) >> 2;
        }
242 243 244 245
        r = &d->io_regions[reg];
        if (r->size == 0)
            goto default_config;
        /* compute the stored value */
246 247 248 249 250 251 252 253
        if (reg == PCI_ROM_SLOT) {
            /* keep ROM enable bit */
            val &= (~(r->size - 1)) | 1;
        } else {
            val &= ~(r->size - 1);
            val |= r->type;
        }
        *(uint32_t *)(d->config + address) = cpu_to_le32(val);
254
        pci_update_mappings(d);
B
bellard 已提交
255
        return;
256 257 258
    }
 default_config:
    /* not efficient, but simple */
B
bellard 已提交
259
    addr = address;
260 261
    for(i = 0; i < len; i++) {
        /* default read/write accesses */
262
        switch(d->config[0x0e]) {
263
        case 0x00:
264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283
        case 0x80:
            switch(addr) {
            case 0x00:
            case 0x01:
            case 0x02:
            case 0x03:
            case 0x08:
            case 0x09:
            case 0x0a:
            case 0x0b:
            case 0x0e:
            case 0x10 ... 0x27: /* base */
            case 0x30 ... 0x33: /* rom */
            case 0x3d:
                can_write = 0;
                break;
            default:
                can_write = 1;
                break;
            }
284 285
            break;
        default:
286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304
        case 0x01:
            switch(addr) {
            case 0x00:
            case 0x01:
            case 0x02:
            case 0x03:
            case 0x08:
            case 0x09:
            case 0x0a:
            case 0x0b:
            case 0x0e:
            case 0x38 ... 0x3b: /* rom */
            case 0x3d:
                can_write = 0;
                break;
            default:
                can_write = 1;
                break;
            }
305 306 307
            break;
        }
        if (can_write) {
B
bellard 已提交
308
            d->config[addr] = val;
309
        }
B
bellard 已提交
310
        addr++;
311 312 313 314 315 316 317
        val >>= 8;
    }

    end = address + len;
    if (end > PCI_COMMAND && address < (PCI_COMMAND + 2)) {
        /* if the command register is modified, we must modify the mappings */
        pci_update_mappings(d);
B
bellard 已提交
318 319 320 321 322 323 324 325
    }
}

static void pci_data_write(void *opaque, uint32_t addr, 
                           uint32_t val, int len)
{
    PCIBridge *s = opaque;
    PCIDevice **bus, *pci_dev;
326
    int config_addr;
B
bellard 已提交
327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348
    
#if defined(DEBUG_PCI) && 0
    printf("pci_data_write: addr=%08x val=%08x len=%d\n",
           s->config_reg, val, len);
#endif
    if (!(s->config_reg & (1 << 31))) {
        return;
    }
    if ((s->config_reg & 0x3) != 0) {
        return;
    }
    bus = s->pci_bus[(s->config_reg >> 16) & 0xff];
    if (!bus)
        return;
    pci_dev = bus[(s->config_reg >> 8) & 0xff];
    if (!pci_dev)
        return;
    config_addr = (s->config_reg & 0xfc) | (addr & 3);
#if defined(DEBUG_PCI)
    printf("pci_config_write: %s: addr=%02x val=%08x len=%d\n",
           pci_dev->name, config_addr, val, len);
#endif
349
    pci_dev->config_write(pci_dev, config_addr, val, len);
B
bellard 已提交
350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369
}

static uint32_t pci_data_read(void *opaque, uint32_t addr, 
                              int len)
{
    PCIBridge *s = opaque;
    PCIDevice **bus, *pci_dev;
    int config_addr;
    uint32_t val;

    if (!(s->config_reg & (1 << 31)))
        goto fail;
    if ((s->config_reg & 0x3) != 0)
        goto fail;
    bus = s->pci_bus[(s->config_reg >> 16) & 0xff];
    if (!bus)
        goto fail;
    pci_dev = bus[(s->config_reg >> 8) & 0xff];
    if (!pci_dev) {
    fail:
370 371 372 373 374 375 376 377 378 379 380 381
        switch(len) {
        case 1:
            val = 0xff;
            break;
        case 2:
            val = 0xffff;
            break;
        default:
        case 4:
            val = 0xffffffff;
            break;
        }
B
bellard 已提交
382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431
        goto the_end;
    }
    config_addr = (s->config_reg & 0xfc) | (addr & 3);
    val = pci_dev->config_read(pci_dev, config_addr, len);
#if defined(DEBUG_PCI)
    printf("pci_config_read: %s: addr=%02x val=%08x len=%d\n",
           pci_dev->name, config_addr, val, len);
#endif
 the_end:
#if defined(DEBUG_PCI) && 0
    printf("pci_data_read: addr=%08x val=%08x len=%d\n",
           s->config_reg, val, len);
#endif
    return val;
}

static void pci_data_writeb(void* opaque, uint32_t addr, uint32_t val)
{
    pci_data_write(opaque, addr, val, 1);
}

static void pci_data_writew(void* opaque, uint32_t addr, uint32_t val)
{
    pci_data_write(opaque, addr, val, 2);
}

static void pci_data_writel(void* opaque, uint32_t addr, uint32_t val)
{
    pci_data_write(opaque, addr, val, 4);
}

static uint32_t pci_data_readb(void* opaque, uint32_t addr)
{
    return pci_data_read(opaque, addr, 1);
}

static uint32_t pci_data_readw(void* opaque, uint32_t addr)
{
    return pci_data_read(opaque, addr, 2);
}

static uint32_t pci_data_readl(void* opaque, uint32_t addr)
{
    return pci_data_read(opaque, addr, 4);
}

/* i440FX PCI bridge */

void i440fx_init(void)
{
B
bellard 已提交
432
    PCIBridge *s = &pci_bridge[0];
B
bellard 已提交
433 434
    PCIDevice *d;

435 436
    register_ioport_write(0xcf8, 4, 4, pci_addr_writel, s);
    register_ioport_read(0xcf8, 4, 4, pci_addr_readl, s);
B
bellard 已提交
437 438 439 440 441 442 443 444 445

    register_ioport_write(0xcfc, 4, 1, pci_data_writeb, s);
    register_ioport_write(0xcfc, 4, 2, pci_data_writew, s);
    register_ioport_write(0xcfc, 4, 4, pci_data_writel, s);
    register_ioport_read(0xcfc, 4, 1, pci_data_readb, s);
    register_ioport_read(0xcfc, 4, 2, pci_data_readw, s);
    register_ioport_read(0xcfc, 4, 4, pci_data_readl, s);

    d = pci_register_device("i440FX", sizeof(PCIDevice), 0, 0, 
446
                            NULL, NULL);
B
bellard 已提交
447 448 449 450 451 452

    d->config[0x00] = 0x86; // vendor_id
    d->config[0x01] = 0x80;
    d->config[0x02] = 0x37; // device_id
    d->config[0x03] = 0x12;
    d->config[0x08] = 0x02; // revision
B
bellard 已提交
453
    d->config[0x0a] = 0x00; // class_sub = host2pci
B
bellard 已提交
454
    d->config[0x0b] = 0x06; // class_base = PCI_bridge
B
bellard 已提交
455
    d->config[0x0e] = 0x00; // header_type
B
bellard 已提交
456 457
}

458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522
/* PIIX3 PCI to ISA bridge */

typedef struct PIIX3State {
    PCIDevice dev;
} PIIX3State;

PIIX3State *piix3_state;

static void piix3_reset(PIIX3State *d)
{
    uint8_t *pci_conf = d->dev.config;

    pci_conf[0x04] = 0x07; // master, memory and I/O
    pci_conf[0x05] = 0x00;
    pci_conf[0x06] = 0x00;
    pci_conf[0x07] = 0x02; // PCI_status_devsel_medium
    pci_conf[0x4c] = 0x4d;
    pci_conf[0x4e] = 0x03;
    pci_conf[0x4f] = 0x00;
    pci_conf[0x60] = 0x80;
    pci_conf[0x69] = 0x02;
    pci_conf[0x70] = 0x80;
    pci_conf[0x76] = 0x0c;
    pci_conf[0x77] = 0x0c;
    pci_conf[0x78] = 0x02;
    pci_conf[0x79] = 0x00;
    pci_conf[0x80] = 0x00;
    pci_conf[0x82] = 0x00;
    pci_conf[0xa0] = 0x08;
    pci_conf[0xa0] = 0x08;
    pci_conf[0xa2] = 0x00;
    pci_conf[0xa3] = 0x00;
    pci_conf[0xa4] = 0x00;
    pci_conf[0xa5] = 0x00;
    pci_conf[0xa6] = 0x00;
    pci_conf[0xa7] = 0x00;
    pci_conf[0xa8] = 0x0f;
    pci_conf[0xaa] = 0x00;
    pci_conf[0xab] = 0x00;
    pci_conf[0xac] = 0x00;
    pci_conf[0xae] = 0x00;
}

void piix3_init(void)
{
    PIIX3State *d;
    uint8_t *pci_conf;

    d = (PIIX3State *)pci_register_device("PIIX3", sizeof(PIIX3State),
                                          0, -1, 
                                          NULL, NULL);
    piix3_state = d;
    pci_conf = d->dev.config;

    pci_conf[0x00] = 0x86; // Intel
    pci_conf[0x01] = 0x80;
    pci_conf[0x02] = 0x00; // 82371SB PIIX3 PCI-to-ISA bridge (Step A1)
    pci_conf[0x03] = 0x70;
    pci_conf[0x0a] = 0x01; // class_sub = PCI_ISA
    pci_conf[0x0b] = 0x06; // class_base = PCI_bridge
    pci_conf[0x0e] = 0x80; // header_type = PCI_multifunction, generic

    piix3_reset(d);
}

B
bellard 已提交
523 524 525 526 527 528 529 530 531 532 533 534 535 536
/* PREP pci init */

static inline void set_config(PCIBridge *s, target_phys_addr_t addr)
{
    int devfn, i;

    for(i = 0; i < 11; i++) {
        if ((addr & (1 << (11 + i))) != 0)
            break;
    }
    devfn = ((addr >> 8) & 7) | (i << 3);
    s->config_reg = 0x80000000 | (addr & 0xfc) | (devfn << 8);
}

537
static void PPC_PCIIO_writeb (void *opaque, target_phys_addr_t addr, uint32_t val)
B
bellard 已提交
538
{
539
    PCIBridge *s = opaque;
B
bellard 已提交
540 541 542 543
    set_config(s, addr);
    pci_data_write(s, addr, val, 1);
}

544
static void PPC_PCIIO_writew (void *opaque, target_phys_addr_t addr, uint32_t val)
B
bellard 已提交
545
{
546
    PCIBridge *s = opaque;
B
bellard 已提交
547 548 549 550 551 552 553
    set_config(s, addr);
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap16(val);
#endif
    pci_data_write(s, addr, val, 2);
}

554
static void PPC_PCIIO_writel (void *opaque, target_phys_addr_t addr, uint32_t val)
B
bellard 已提交
555
{
556
    PCIBridge *s = opaque;
B
bellard 已提交
557 558 559 560 561 562 563
    set_config(s, addr);
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap32(val);
#endif
    pci_data_write(s, addr, val, 4);
}

564
static uint32_t PPC_PCIIO_readb (void *opaque, target_phys_addr_t addr)
B
bellard 已提交
565
{
566
    PCIBridge *s = opaque;
B
bellard 已提交
567 568 569 570 571 572
    uint32_t val;
    set_config(s, addr);
    val = pci_data_read(s, addr, 1);
    return val;
}

573
static uint32_t PPC_PCIIO_readw (void *opaque, target_phys_addr_t addr)
B
bellard 已提交
574
{
575
    PCIBridge *s = opaque;
B
bellard 已提交
576 577 578 579 580 581 582 583 584
    uint32_t val;
    set_config(s, addr);
    val = pci_data_read(s, addr, 2);
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap16(val);
#endif
    return val;
}

585
static uint32_t PPC_PCIIO_readl (void *opaque, target_phys_addr_t addr)
B
bellard 已提交
586
{
587
    PCIBridge *s = opaque;
B
bellard 已提交
588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610
    uint32_t val;
    set_config(s, addr);
    val = pci_data_read(s, addr, 4);
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap32(val);
#endif
    return val;
}

static CPUWriteMemoryFunc *PPC_PCIIO_write[] = {
    &PPC_PCIIO_writeb,
    &PPC_PCIIO_writew,
    &PPC_PCIIO_writel,
};

static CPUReadMemoryFunc *PPC_PCIIO_read[] = {
    &PPC_PCIIO_readb,
    &PPC_PCIIO_readw,
    &PPC_PCIIO_readl,
};

void pci_prep_init(void)
{
B
bellard 已提交
611
    PCIBridge *s = &pci_bridge[0];
B
bellard 已提交
612 613 614
    PCIDevice *d;
    int PPC_io_memory;

615 616
    PPC_io_memory = cpu_register_io_memory(0, PPC_PCIIO_read, 
                                           PPC_PCIIO_write, s);
B
bellard 已提交
617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635
    cpu_register_physical_memory(0x80800000, 0x00400000, PPC_io_memory);

    d = pci_register_device("PREP PCI Bridge", sizeof(PCIDevice), 0, 0, 
                            NULL, NULL);

    /* XXX: put correct IDs */
    d->config[0x00] = 0x11; // vendor_id
    d->config[0x01] = 0x10;
    d->config[0x02] = 0x26; // device_id
    d->config[0x03] = 0x00;
    d->config[0x08] = 0x02; // revision
    d->config[0x0a] = 0x04; // class_sub = pci2pci
    d->config[0x0b] = 0x06; // class_base = PCI_bridge
    d->config[0x0e] = 0x01; // header_type
}


/* pmac pci init */

B
bellard 已提交
636 637 638
/* Grackle PCI host */
static void pci_grackle_config_writel (void *opaque, target_phys_addr_t addr,
                                       uint32_t val)
B
bellard 已提交
639
{
640
    PCIBridge *s = opaque;
B
bellard 已提交
641 642 643 644 645 646
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap32(val);
#endif
    s->config_reg = val;
}

B
bellard 已提交
647
static uint32_t pci_grackle_config_readl (void *opaque, target_phys_addr_t addr)
B
bellard 已提交
648
{
649
    PCIBridge *s = opaque;
B
bellard 已提交
650 651 652 653 654 655 656 657 658
    uint32_t val;

    val = s->config_reg;
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap32(val);
#endif
    return val;
}

B
bellard 已提交
659 660 661 662
static CPUWriteMemoryFunc *pci_grackle_config_write[] = {
    &pci_grackle_config_writel,
    &pci_grackle_config_writel,
    &pci_grackle_config_writel,
B
bellard 已提交
663 664
};

B
bellard 已提交
665 666 667 668
static CPUReadMemoryFunc *pci_grackle_config_read[] = {
    &pci_grackle_config_readl,
    &pci_grackle_config_readl,
    &pci_grackle_config_readl,
B
bellard 已提交
669 670
};

B
bellard 已提交
671 672
static void pci_grackle_writeb (void *opaque, target_phys_addr_t addr,
                                uint32_t val)
B
bellard 已提交
673
{
674
    PCIBridge *s = opaque;
B
bellard 已提交
675 676 677
    pci_data_write(s, addr, val, 1);
}

B
bellard 已提交
678 679
static void pci_grackle_writew (void *opaque, target_phys_addr_t addr,
                                uint32_t val)
B
bellard 已提交
680
{
681
    PCIBridge *s = opaque;
B
bellard 已提交
682 683 684 685 686 687
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap16(val);
#endif
    pci_data_write(s, addr, val, 2);
}

B
bellard 已提交
688 689
static void pci_grackle_writel (void *opaque, target_phys_addr_t addr,
                                uint32_t val)
B
bellard 已提交
690
{
691
    PCIBridge *s = opaque;
B
bellard 已提交
692 693 694 695 696 697
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap32(val);
#endif
    pci_data_write(s, addr, val, 4);
}

B
bellard 已提交
698
static uint32_t pci_grackle_readb (void *opaque, target_phys_addr_t addr)
B
bellard 已提交
699
{
700
    PCIBridge *s = opaque;
B
bellard 已提交
701 702 703 704 705
    uint32_t val;
    val = pci_data_read(s, addr, 1);
    return val;
}

B
bellard 已提交
706
static uint32_t pci_grackle_readw (void *opaque, target_phys_addr_t addr)
B
bellard 已提交
707
{
708
    PCIBridge *s = opaque;
B
bellard 已提交
709 710 711 712 713 714 715 716
    uint32_t val;
    val = pci_data_read(s, addr, 2);
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap16(val);
#endif
    return val;
}

B
bellard 已提交
717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841
static uint32_t pci_grackle_readl (void *opaque, target_phys_addr_t addr)
{
    PCIBridge *s = opaque;
    uint32_t val;

    val = pci_data_read(s, addr, 4);
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap32(val);
#endif
    return val;
}

static CPUWriteMemoryFunc *pci_grackle_write[] = {
    &pci_grackle_writeb,
    &pci_grackle_writew,
    &pci_grackle_writel,
};

static CPUReadMemoryFunc *pci_grackle_read[] = {
    &pci_grackle_readb,
    &pci_grackle_readw,
    &pci_grackle_readl,
};

/* Uninorth PCI host (for all Mac99 and newer machines */
static void pci_unin_main_config_writel (void *opaque, target_phys_addr_t addr,
                                         uint32_t val)
{
    PCIBridge *s = opaque;
    int i;

#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap32(val);
#endif

    for (i = 11; i < 32; i++) {
        if ((val & (1 << i)) != 0)
            break;
    }
#if 0
    s->config_reg = 0x80000000 | (1 << 16) | (val & 0x7FC) | (i << 11);
#else
    s->config_reg = 0x80000000 | (0 << 16) | (val & 0x7FC) | (i << 11);
#endif
}

static uint32_t pci_unin_main_config_readl (void *opaque,
                                            target_phys_addr_t addr)
{
    PCIBridge *s = opaque;
    uint32_t val;
    int devfn;

    devfn = (s->config_reg >> 8) & 0xFF;
    val = (1 << (devfn >> 3)) | ((devfn & 0x07) << 8) | (s->config_reg & 0xFC);
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap32(val);
#endif

    return val;
}

static CPUWriteMemoryFunc *pci_unin_main_config_write[] = {
    &pci_unin_main_config_writel,
    &pci_unin_main_config_writel,
    &pci_unin_main_config_writel,
};

static CPUReadMemoryFunc *pci_unin_main_config_read[] = {
    &pci_unin_main_config_readl,
    &pci_unin_main_config_readl,
    &pci_unin_main_config_readl,
};

static void pci_unin_main_writeb (void *opaque, target_phys_addr_t addr,
                                  uint32_t val)
{
    PCIBridge *s = opaque;
    pci_data_write(s, addr & 7, val, 1);
}

static void pci_unin_main_writew (void *opaque, target_phys_addr_t addr,
                                  uint32_t val)
{
    PCIBridge *s = opaque;
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap16(val);
#endif
    pci_data_write(s, addr & 7, val, 2);
}

static void pci_unin_main_writel (void *opaque, target_phys_addr_t addr,
                                uint32_t val)
{
    PCIBridge *s = opaque;
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap32(val);
#endif
    pci_data_write(s, addr & 7, val, 4);
}

static uint32_t pci_unin_main_readb (void *opaque, target_phys_addr_t addr)
{
    PCIBridge *s = opaque;
    uint32_t val;

    val = pci_data_read(s, addr & 7, 1);

    return val;
}

static uint32_t pci_unin_main_readw (void *opaque, target_phys_addr_t addr)
{
    PCIBridge *s = opaque;
    uint32_t val;

    val = pci_data_read(s, addr & 7, 2);
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap16(val);
#endif

    return val;
}

static uint32_t pci_unin_main_readl (void *opaque, target_phys_addr_t addr)
B
bellard 已提交
842
{
843
    PCIBridge *s = opaque;
B
bellard 已提交
844 845 846 847 848 849
    uint32_t val;

    val = pci_data_read(s, addr, 4);
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap32(val);
#endif
B
bellard 已提交
850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962

    return val;
}

static CPUWriteMemoryFunc *pci_unin_main_write[] = {
    &pci_unin_main_writeb,
    &pci_unin_main_writew,
    &pci_unin_main_writel,
};

static CPUReadMemoryFunc *pci_unin_main_read[] = {
    &pci_unin_main_readb,
    &pci_unin_main_readw,
    &pci_unin_main_readl,
};

static void pci_unin_config_writel (void *opaque, target_phys_addr_t addr,
                                    uint32_t val)
{
    PCIBridge *s = opaque;

#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap32(val);
#endif
    s->config_reg = 0x80000000 | (val & ~0x00000001);
}

static uint32_t pci_unin_config_readl (void *opaque,
                                       target_phys_addr_t addr)
{
    PCIBridge *s = opaque;
    uint32_t val;

    val = (s->config_reg | 0x00000001) & ~0x80000000;
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap32(val);
#endif

    return val;
}

static CPUWriteMemoryFunc *pci_unin_config_write[] = {
    &pci_unin_config_writel,
    &pci_unin_config_writel,
    &pci_unin_config_writel,
};

static CPUReadMemoryFunc *pci_unin_config_read[] = {
    &pci_unin_config_readl,
    &pci_unin_config_readl,
    &pci_unin_config_readl,
};

static void pci_unin_writeb (void *opaque, target_phys_addr_t addr,
                             uint32_t val)
{
    PCIBridge *s = opaque;
    pci_data_write(s, addr & 3, val, 1);
}

static void pci_unin_writew (void *opaque, target_phys_addr_t addr,
                             uint32_t val)
{
    PCIBridge *s = opaque;
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap16(val);
#endif
    pci_data_write(s, addr & 3, val, 2);
}

static void pci_unin_writel (void *opaque, target_phys_addr_t addr,
                             uint32_t val)
{
    PCIBridge *s = opaque;
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap32(val);
#endif
    pci_data_write(s, addr & 3, val, 4);
}

static uint32_t pci_unin_readb (void *opaque, target_phys_addr_t addr)
{
    PCIBridge *s = opaque;
    uint32_t val;

    val = pci_data_read(s, addr & 3, 1);

    return val;
}

static uint32_t pci_unin_readw (void *opaque, target_phys_addr_t addr)
{
    PCIBridge *s = opaque;
    uint32_t val;

    val = pci_data_read(s, addr & 3, 2);
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap16(val);
#endif

    return val;
}

static uint32_t pci_unin_readl (void *opaque, target_phys_addr_t addr)
{
    PCIBridge *s = opaque;
    uint32_t val;

    val = pci_data_read(s, addr & 3, 4);
#ifdef TARGET_WORDS_BIGENDIAN
    val = bswap32(val);
#endif

B
bellard 已提交
963 964 965
    return val;
}

B
bellard 已提交
966 967 968 969
static CPUWriteMemoryFunc *pci_unin_write[] = {
    &pci_unin_writeb,
    &pci_unin_writew,
    &pci_unin_writel,
B
bellard 已提交
970 971
};

B
bellard 已提交
972 973 974 975
static CPUReadMemoryFunc *pci_unin_read[] = {
    &pci_unin_readb,
    &pci_unin_readw,
    &pci_unin_readl,
B
bellard 已提交
976 977 978 979
};

void pci_pmac_init(void)
{
B
bellard 已提交
980
    PCIBridge *s;
B
bellard 已提交
981 982 983
    PCIDevice *d;
    int pci_mem_config, pci_mem_data;

B
bellard 已提交
984 985 986 987 988 989 990 991 992 993 994
    /* Use values found on a real PowerMac */
    /* Uninorth main bus */
    s = &pci_bridge[0];
    pci_mem_config = cpu_register_io_memory(0, pci_unin_main_config_read, 
                                            pci_unin_main_config_write, s);
    pci_mem_data = cpu_register_io_memory(0, pci_unin_main_read,
                                          pci_unin_main_write, s);
    cpu_register_physical_memory(0xf2800000, 0x1000, pci_mem_config);
    cpu_register_physical_memory(0xf2c00000, 0x1000, pci_mem_data);

    d = pci_register_device("Uni-north main", sizeof(PCIDevice), 0, 11 << 3,
B
bellard 已提交
995
                            NULL, NULL);
B
bellard 已提交
996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062
    d->config[0x00] = 0x6b; // vendor_id : Apple
    d->config[0x01] = 0x10;
    d->config[0x02] = 0x1F; // device_id
    d->config[0x03] = 0x00;
    d->config[0x08] = 0x00; // revision
    d->config[0x0A] = 0x00; // class_sub = pci host
    d->config[0x0B] = 0x06; // class_base = PCI_bridge
    d->config[0x0C] = 0x08; // cache_line_size
    d->config[0x0D] = 0x10; // latency_timer
    d->config[0x0E] = 0x00; // header_type
    d->config[0x34] = 0x00; // capabilities_pointer

#if 0 // XXX: not activated as PPC BIOS doesn't handle mutiple buses properly
    /* pci-to-pci bridge */
    d = pci_register_device("Uni-north bridge", sizeof(PCIDevice), 0, 13 << 3,
                            NULL, NULL);
    d->config[0x00] = 0x11; // vendor_id : TI
    d->config[0x01] = 0x10;
    d->config[0x02] = 0x26; // device_id
    d->config[0x03] = 0x00;
    d->config[0x08] = 0x05; // revision
    d->config[0x0A] = 0x04; // class_sub = pci2pci
    d->config[0x0B] = 0x06; // class_base = PCI_bridge
    d->config[0x0C] = 0x08; // cache_line_size
    d->config[0x0D] = 0x20; // latency_timer
    d->config[0x0E] = 0x01; // header_type

    d->config[0x18] = 0x01; // primary_bus
    d->config[0x19] = 0x02; // secondary_bus
    d->config[0x1A] = 0x02; // subordinate_bus
    d->config[0x1B] = 0x20; // secondary_latency_timer
    d->config[0x1C] = 0x11; // io_base
    d->config[0x1D] = 0x01; // io_limit
    d->config[0x20] = 0x00; // memory_base
    d->config[0x21] = 0x80;
    d->config[0x22] = 0x00; // memory_limit
    d->config[0x23] = 0x80;
    d->config[0x24] = 0x01; // prefetchable_memory_base
    d->config[0x25] = 0x80;
    d->config[0x26] = 0xF1; // prefectchable_memory_limit
    d->config[0x27] = 0x7F;
    // d->config[0x34] = 0xdc // capabilities_pointer
#endif
#if 0 // XXX: not needed for now
    /* Uninorth AGP bus */
    s = &pci_bridge[1];
    pci_mem_config = cpu_register_io_memory(0, pci_unin_config_read, 
                                            pci_unin_config_write, s);
    pci_mem_data = cpu_register_io_memory(0, pci_unin_read,
                                          pci_unin_write, s);
    cpu_register_physical_memory(0xf0800000, 0x1000, pci_mem_config);
    cpu_register_physical_memory(0xf0c00000, 0x1000, pci_mem_data);

    d = pci_register_device("Uni-north AGP", sizeof(PCIDevice), 0, 11 << 3,
                            NULL, NULL);
    d->config[0x00] = 0x6b; // vendor_id : Apple
    d->config[0x01] = 0x10;
    d->config[0x02] = 0x20; // device_id
    d->config[0x03] = 0x00;
    d->config[0x08] = 0x00; // revision
    d->config[0x0A] = 0x00; // class_sub = pci host
    d->config[0x0B] = 0x06; // class_base = PCI_bridge
    d->config[0x0C] = 0x08; // cache_line_size
    d->config[0x0D] = 0x10; // latency_timer
    d->config[0x0E] = 0x00; // header_type
    //    d->config[0x34] = 0x80; // capabilities_pointer
#endif
B
bellard 已提交
1063

B
bellard 已提交
1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089
#if 0 // XXX: not needed for now
    /* Uninorth internal bus */
    s = &pci_bridge[2];
    pci_mem_config = cpu_register_io_memory(0, pci_unin_config_read, 
                                            pci_unin_config_write, s);
    pci_mem_data = cpu_register_io_memory(0, pci_unin_read,
                                          pci_unin_write, s);
    cpu_register_physical_memory(0xf4800000, 0x1000, pci_mem_config);
    cpu_register_physical_memory(0xf4c00000, 0x1000, pci_mem_data);

    d = pci_register_device("Uni-north internal", sizeof(PCIDevice),
                            3, 11 << 3, NULL, NULL);
    d->config[0x00] = 0x6b; // vendor_id : Apple
    d->config[0x01] = 0x10;
    d->config[0x02] = 0x1E; // device_id
    d->config[0x03] = 0x00;
    d->config[0x08] = 0x00; // revision
    d->config[0x0A] = 0x00; // class_sub = pci host
    d->config[0x0B] = 0x06; // class_base = PCI_bridge
    d->config[0x0C] = 0x08; // cache_line_size
    d->config[0x0D] = 0x10; // latency_timer
    d->config[0x0E] = 0x00; // header_type
    d->config[0x34] = 0x00; // capabilities_pointer
#endif

#if 0 // Grackle ?
B
bellard 已提交
1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114
    /* same values as PearPC - check this */
    d->config[0x00] = 0x11; // vendor_id
    d->config[0x01] = 0x10;
    d->config[0x02] = 0x26; // device_id
    d->config[0x03] = 0x00;
    d->config[0x08] = 0x02; // revision
    d->config[0x0a] = 0x04; // class_sub = pci2pci
    d->config[0x0b] = 0x06; // class_base = PCI_bridge
    d->config[0x0e] = 0x01; // header_type

    d->config[0x18] = 0x0;  // primary_bus
    d->config[0x19] = 0x1;  // secondary_bus
    d->config[0x1a] = 0x1;  // subordinate_bus
    d->config[0x1c] = 0x10; // io_base
    d->config[0x1d] = 0x20; // io_limit
    
    d->config[0x20] = 0x80; // memory_base
    d->config[0x21] = 0x80;
    d->config[0x22] = 0x90; // memory_limit
    d->config[0x23] = 0x80;
    
    d->config[0x24] = 0x00; // prefetchable_memory_base
    d->config[0x25] = 0x84;
    d->config[0x26] = 0x00; // prefetchable_memory_limit
    d->config[0x27] = 0x85;
B
bellard 已提交
1115
#endif
B
bellard 已提交
1116 1117
}

1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131
/***********************************************************/
/* generic PCI irq support */

/* return the global irq number corresponding to a given device irq
   pin. We could also use the bus number to have a more precise
   mapping. */
static inline int pci_slot_get_pirq(PCIDevice *pci_dev, int irq_num)
{
    int slot_addend;
    slot_addend = (pci_dev->devfn >> 3);
    return (irq_num + slot_addend) & 3;
}

/* 0 <= irq_num <= 3. level must be 0 or 1 */
B
bellard 已提交
1132 1133 1134 1135 1136
#ifdef TARGET_PPC
void pci_set_irq(PCIDevice *pci_dev, int irq_num, int level)
{
}
#else
1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171
void pci_set_irq(PCIDevice *pci_dev, int irq_num, int level)
{
    int irq_index, shift, pic_irq, pic_level;
    uint32_t *p;

    irq_num = pci_slot_get_pirq(pci_dev, irq_num);
    irq_index = pci_dev->irq_index;
    p = &pci_irq_levels[irq_num][irq_index >> 5];
    shift = (irq_index & 0x1f);
    *p = (*p & ~(1 << shift)) | (level << shift);

    /* now we change the pic irq level according to the piix irq mappings */
    pic_irq = piix3_state->dev.config[0x60 + irq_num];
    if (pic_irq < 16) {
        /* the pic level is the logical OR of all the PCI irqs mapped
           to it */
        pic_level = 0;
#if (PCI_IRQ_WORDS == 2)
        pic_level = ((pci_irq_levels[irq_num][0] | 
                      pci_irq_levels[irq_num][1]) != 0);
#else
        {
            int i;
            pic_level = 0;
            for(i = 0; i < PCI_IRQ_WORDS; i++) {
                if (pci_irq_levels[irq_num][i]) {
                    pic_level = 1;
                    break;
                }
            }
        }
#endif
        pic_set_irq(pic_irq, pic_level);
    }
}
B
bellard 已提交
1172
#endif
1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206

/***********************************************************/
/* monitor info on PCI */

static void pci_info_device(PCIDevice *d)
{
    int i, class;
    PCIIORegion *r;

    printf("  Bus %2d, device %3d, function %d:\n",
           d->bus_num, d->devfn >> 3, d->devfn & 7);
    class = le16_to_cpu(*((uint16_t *)(d->config + PCI_CLASS_DEVICE)));
    printf("    ");
    switch(class) {
    case 0x0101:
        printf("IDE controller");
        break;
    case 0x0200:
        printf("Ethernet controller");
        break;
    case 0x0300:
        printf("VGA controller");
        break;
    default:
        printf("Class %04x", class);
        break;
    }
    printf(": PCI device %04x:%04x\n",
           le16_to_cpu(*((uint16_t *)(d->config + PCI_VENDOR_ID))),
           le16_to_cpu(*((uint16_t *)(d->config + PCI_DEVICE_ID))));

    if (d->config[PCI_INTERRUPT_PIN] != 0) {
        printf("      IRQ %d.\n", d->config[PCI_INTERRUPT_LINE]);
    }
1207
    for(i = 0;i < PCI_NUM_REGIONS; i++) {
1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223
        r = &d->io_regions[i];
        if (r->size != 0) {
            printf("      BAR%d: ", i);
            if (r->type & PCI_ADDRESS_SPACE_IO) {
                printf("I/O at 0x%04x [0x%04x].\n", 
                       r->addr, r->addr + r->size - 1);
            } else {
                printf("32 bit memory at 0x%08x [0x%08x].\n", 
                       r->addr, r->addr + r->size - 1);
            }
        }
    }
}

void pci_info(void)
{
B
bellard 已提交
1224
    PCIBridge *s = &pci_bridge[0];
1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273
    PCIDevice **bus;
    int bus_num, devfn;
    
    for(bus_num = 0; bus_num < 256; bus_num++) {
        bus = s->pci_bus[bus_num];
        if (bus) {
            for(devfn = 0; devfn < 256; devfn++) {
                if (bus[devfn])
                    pci_info_device(bus[devfn]);
            }
        }
    }
}

/***********************************************************/
/* XXX: the following should be moved to the PC BIOS */

static uint32_t isa_inb(uint32_t addr)
{
    return cpu_inb(cpu_single_env, addr);
}

static void isa_outb(uint32_t val, uint32_t addr)
{
    cpu_outb(cpu_single_env, addr, val);
}

static uint32_t isa_inw(uint32_t addr)
{
    return cpu_inw(cpu_single_env, addr);
}

static void isa_outw(uint32_t val, uint32_t addr)
{
    cpu_outw(cpu_single_env, addr, val);
}

static uint32_t isa_inl(uint32_t addr)
{
    return cpu_inl(cpu_single_env, addr);
}

static void isa_outl(uint32_t val, uint32_t addr)
{
    cpu_outl(cpu_single_env, addr, val);
}

static void pci_config_writel(PCIDevice *d, uint32_t addr, uint32_t val)
{
B
bellard 已提交
1274
    PCIBridge *s = &pci_bridge[0];
1275 1276 1277 1278 1279 1280 1281
    s->config_reg = 0x80000000 | (d->bus_num << 16) | 
        (d->devfn << 8) | addr;
    pci_data_write(s, 0, val, 4);
}

static void pci_config_writew(PCIDevice *d, uint32_t addr, uint32_t val)
{
B
bellard 已提交
1282
    PCIBridge *s = &pci_bridge[0];
1283 1284 1285 1286 1287 1288 1289
    s->config_reg = 0x80000000 | (d->bus_num << 16) | 
        (d->devfn << 8) | (addr & ~3);
    pci_data_write(s, addr & 3, val, 2);
}

static void pci_config_writeb(PCIDevice *d, uint32_t addr, uint32_t val)
{
B
bellard 已提交
1290
    PCIBridge *s = &pci_bridge[0];
1291 1292 1293 1294 1295 1296 1297
    s->config_reg = 0x80000000 | (d->bus_num << 16) | 
        (d->devfn << 8) | (addr & ~3);
    pci_data_write(s, addr & 3, val, 1);
}

static uint32_t pci_config_readl(PCIDevice *d, uint32_t addr)
{
B
bellard 已提交
1298
    PCIBridge *s = &pci_bridge[0];
1299 1300 1301 1302 1303 1304 1305
    s->config_reg = 0x80000000 | (d->bus_num << 16) | 
        (d->devfn << 8) | addr;
    return pci_data_read(s, 0, 4);
}

static uint32_t pci_config_readw(PCIDevice *d, uint32_t addr)
{
B
bellard 已提交
1306
    PCIBridge *s = &pci_bridge[0];
1307 1308 1309 1310 1311 1312 1313
    s->config_reg = 0x80000000 | (d->bus_num << 16) | 
        (d->devfn << 8) | (addr & ~3);
    return pci_data_read(s, addr & 3, 2);
}

static uint32_t pci_config_readb(PCIDevice *d, uint32_t addr)
{
B
bellard 已提交
1314
    PCIBridge *s = &pci_bridge[0];
1315 1316 1317 1318
    s->config_reg = 0x80000000 | (d->bus_num << 16) | 
        (d->devfn << 8) | (addr & ~3);
    return pci_data_read(s, addr & 3, 1);
}
B
bellard 已提交
1319 1320 1321

static uint32_t pci_bios_io_addr;
static uint32_t pci_bios_mem_addr;
1322 1323
/* host irqs corresponding to PCI irqs A-D */
static uint8_t pci_irqs[4] = { 11, 9, 11, 9 };
B
bellard 已提交
1324 1325 1326 1327

static void pci_set_io_region_addr(PCIDevice *d, int region_num, uint32_t addr)
{
    PCIIORegion *r;
1328
    uint16_t cmd;
1329 1330 1331 1332 1333 1334 1335
    uint32_t ofs;

    if ( region_num == PCI_ROM_SLOT ) {
        ofs = 0x30;
    }else{
        ofs = 0x10 + region_num * 4;
    }
B
bellard 已提交
1336

1337
    pci_config_writel(d, ofs, addr);
B
bellard 已提交
1338 1339 1340
    r = &d->io_regions[region_num];

    /* enable memory mappings */
1341
    cmd = pci_config_readw(d, PCI_COMMAND);
1342 1343 1344
    if ( region_num == PCI_ROM_SLOT )
        cmd |= 2;
    else if (r->type & PCI_ADDRESS_SPACE_IO)
1345
        cmd |= 1;
B
bellard 已提交
1346
    else
1347 1348
        cmd |= 2;
    pci_config_writew(d, PCI_COMMAND, cmd);
B
bellard 已提交
1349 1350 1351 1352 1353 1354 1355
}

static void pci_bios_init_device(PCIDevice *d)
{
    int class;
    PCIIORegion *r;
    uint32_t *paddr;
1356
    int i, pin, pic_irq, vendor_id, device_id;
B
bellard 已提交
1357

1358
    class = pci_config_readw(d, PCI_CLASS_DEVICE);
1359 1360
    vendor_id = pci_config_readw(d, PCI_VENDOR_ID);
    device_id = pci_config_readw(d, PCI_DEVICE_ID);
B
bellard 已提交
1361 1362
    switch(class) {
    case 0x0101:
1363 1364 1365 1366
        if (vendor_id == 0x8086 && device_id == 0x7010) {
            /* PIIX3 IDE */
            pci_config_writew(d, PCI_COMMAND, PCI_COMMAND_IO);
            pci_config_writew(d, 0x40, 0x8000); // enable IDE0
B
bellard 已提交
1367
            pci_config_writew(d, 0x42, 0x8000); // enable IDE1
1368 1369 1370 1371 1372 1373 1374
        } else {
            /* IDE: we map it as in ISA mode */
            pci_set_io_region_addr(d, 0, 0x1f0);
            pci_set_io_region_addr(d, 1, 0x3f4);
            pci_set_io_region_addr(d, 2, 0x170);
            pci_set_io_region_addr(d, 3, 0x374);
        }
B
bellard 已提交
1375
        break;
1376
    case 0x0300:
B
bellard 已提交
1377 1378
        if (vendor_id != 0x1234)
            goto default_map;
1379 1380 1381
        /* VGA: map frame buffer to default Bochs VBE address */
        pci_set_io_region_addr(d, 0, 0xE0000000);
        break;
B
bellard 已提交
1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393
    case 0x0800:
        /* PIC */
        vendor_id = pci_config_readw(d, PCI_VENDOR_ID);
        device_id = pci_config_readw(d, PCI_DEVICE_ID);
        if (vendor_id == 0x1014) {
            /* IBM */
            if (device_id == 0x0046 || device_id == 0xFFFF) {
                /* MPIC & MPIC2 */
                pci_set_io_region_addr(d, 0, 0x80800000 + 0x00040000);
            }
        }
        break;
1394
    case 0xff00:
B
bellard 已提交
1395 1396
        if (vendor_id == 0x0106b &&
            (device_id == 0x0017 || device_id == 0x0022)) {
1397 1398 1399 1400
            /* macio bridge */
            pci_set_io_region_addr(d, 0, 0x80800000);
        }
        break;
B
bellard 已提交
1401
    default:
B
bellard 已提交
1402
    default_map:
B
bellard 已提交
1403
        /* default memory mappings */
1404
        for(i = 0; i < PCI_NUM_REGIONS; i++) {
B
bellard 已提交
1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417
            r = &d->io_regions[i];
            if (r->size) {
                if (r->type & PCI_ADDRESS_SPACE_IO)
                    paddr = &pci_bios_io_addr;
                else
                    paddr = &pci_bios_mem_addr;
                *paddr = (*paddr + r->size - 1) & ~(r->size - 1);
                pci_set_io_region_addr(d, i, *paddr);
                *paddr += r->size;
            }
        }
        break;
    }
1418 1419 1420 1421 1422 1423 1424 1425

    /* map the interrupt */
    pin = pci_config_readb(d, PCI_INTERRUPT_PIN);
    if (pin != 0) {
        pin = pci_slot_get_pirq(d, pin - 1);
        pic_irq = pci_irqs[pin];
        pci_config_writeb(d, PCI_INTERRUPT_LINE, pic_irq);
    }
B
bellard 已提交
1426 1427 1428 1429 1430 1431 1432 1433 1434
}

/*
 * This function initializes the PCI devices as a normal PCI BIOS
 * would do. It is provided just in case the BIOS has no support for
 * PCI.
 */
void pci_bios_init(void)
{
B
bellard 已提交
1435
    PCIBridge *s = &pci_bridge[0];
B
bellard 已提交
1436
    PCIDevice **bus;
1437 1438
    int bus_num, devfn, i, irq;
    uint8_t elcr[2];
B
bellard 已提交
1439 1440 1441 1442

    pci_bios_io_addr = 0xc000;
    pci_bios_mem_addr = 0xf0000000;

1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455
    /* activate IRQ mappings */
    elcr[0] = 0x00;
    elcr[1] = 0x00;
    for(i = 0; i < 4; i++) {
        irq = pci_irqs[i];
        /* set to trigger level */
        elcr[irq >> 3] |= (1 << (irq & 7));
        /* activate irq remapping in PIIX */
        pci_config_writeb((PCIDevice *)piix3_state, 0x60 + i, irq);
    }
    isa_outb(elcr[0], 0x4d0);
    isa_outb(elcr[1], 0x4d1);

B
bellard 已提交
1456 1457 1458 1459 1460 1461 1462 1463 1464 1465
    for(bus_num = 0; bus_num < 256; bus_num++) {
        bus = s->pci_bus[bus_num];
        if (bus) {
            for(devfn = 0; devfn < 256; devfn++) {
                if (bus[devfn])
                    pci_bios_init_device(bus[devfn]);
            }
        }
    }
}
B
bellard 已提交
1466 1467 1468 1469 1470 1471 1472 1473

/*
 * This function initializes the PCI devices as a normal PCI BIOS
 * would do. It is provided just in case the BIOS has no support for
 * PCI.
 */
void pci_ppc_bios_init(void)
{
B
bellard 已提交
1474
    PCIBridge *s = &pci_bridge[0];
B
bellard 已提交
1475
    PCIDevice **bus;
B
bellard 已提交
1476 1477 1478
    int bus_num, devfn;
#if 0
    int i, irq;
B
bellard 已提交
1479
    uint8_t elcr[2];
B
bellard 已提交
1480
#endif
B
bellard 已提交
1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509

    pci_bios_io_addr = 0xc000;
    pci_bios_mem_addr = 0xc0000000;

#if 0
    /* activate IRQ mappings */
    elcr[0] = 0x00;
    elcr[1] = 0x00;
    for(i = 0; i < 4; i++) {
        irq = pci_irqs[i];
        /* set to trigger level */
        elcr[irq >> 3] |= (1 << (irq & 7));
        /* activate irq remapping in PIIX */
        pci_config_writeb((PCIDevice *)piix3_state, 0x60 + i, irq);
    }
    isa_outb(elcr[0], 0x4d0);
    isa_outb(elcr[1], 0x4d1);
#endif

    for(bus_num = 0; bus_num < 256; bus_num++) {
        bus = s->pci_bus[bus_num];
        if (bus) {
            for(devfn = 0; devfn < 256; devfn++) {
                if (bus[devfn])
                    pci_bios_init_device(bus[devfn]);
            }
        }
    }
}