/*
* qemu_hotplug.c: QEMU device hotplug management
*
* Copyright (C) 2006-2016 Red Hat, Inc.
* Copyright (C) 2006 Daniel P. Berrange
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library. If not, see
* .
*
* Author: Daniel P. Berrange
*/
#include
#include "qemu_hotplug.h"
#include "qemu_hotplugpriv.h"
#include "qemu_alias.h"
#include "qemu_capabilities.h"
#include "qemu_domain.h"
#include "qemu_domain_address.h"
#include "qemu_command.h"
#include "qemu_hostdev.h"
#include "qemu_interface.h"
#include "qemu_process.h"
#include "qemu_security.h"
#include "qemu_block.h"
#include "domain_audit.h"
#include "netdev_bandwidth_conf.h"
#include "domain_nwfilter.h"
#include "virlog.h"
#include "datatypes.h"
#include "virerror.h"
#include "viralloc.h"
#include "virpci.h"
#include "virfile.h"
#include "virprocess.h"
#include "qemu_cgroup.h"
#include "locking/domain_lock.h"
#include "virnetdev.h"
#include "virnetdevbridge.h"
#include "virnetdevtap.h"
#include "virnetdevopenvswitch.h"
#include "virnetdevmidonet.h"
#include "device_conf.h"
#include "virstoragefile.h"
#include "virstring.h"
#include "virtime.h"
#define VIR_FROM_THIS VIR_FROM_QEMU
VIR_LOG_INIT("qemu.qemu_hotplug");
#define CHANGE_MEDIA_TIMEOUT 5000
/* Wait up to 5 seconds for device removal to finish. */
unsigned long long qemuDomainRemoveDeviceWaitTime = 1000ull * 5;
/**
* qemuHotplugPrepareDiskAccess:
* @driver: qemu driver struct
* @vm: domain object
* @disk: disk to prepare
* @overridesrc: Source different than @disk->src when necessary
* @teardown: Teardown the disk instead of adding it to a vm
*
* Setup the locks, cgroups and security permissions on a disk of a VM.
* If @overridesrc is specified the source struct is used instead of the
* one present in @disk. If @teardown is true, then the labels and cgroups
* are removed instead.
*
* Returns 0 on success and -1 on error. Reports libvirt error.
*/
static int
qemuHotplugPrepareDiskAccess(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDiskDefPtr disk,
virStorageSourcePtr overridesrc,
bool teardown)
{
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
int ret = -1;
virStorageSourcePtr origsrc = NULL;
virErrorPtr orig_err = NULL;
if (overridesrc) {
origsrc = disk->src;
disk->src = overridesrc;
}
/* just tear down the disk access */
if (teardown) {
virErrorPreserveLast(&orig_err);
ret = 0;
goto rollback_cgroup;
}
if (virDomainLockDiskAttach(driver->lockManager, cfg->uri,
vm, disk) < 0)
goto cleanup;
if (qemuDomainNamespaceSetupDisk(vm, disk->src) < 0)
goto rollback_lock;
if (qemuSecuritySetDiskLabel(driver, vm, disk) < 0)
goto rollback_namespace;
if (qemuSetupDiskCgroup(vm, disk) < 0)
goto rollback_label;
ret = 0;
goto cleanup;
rollback_cgroup:
if (qemuTeardownDiskCgroup(vm, disk) < 0)
VIR_WARN("Unable to tear down cgroup access on %s",
NULLSTR(virDomainDiskGetSource(disk)));
rollback_label:
if (qemuSecurityRestoreDiskLabel(driver, vm, disk) < 0)
VIR_WARN("Unable to restore security label on %s",
NULLSTR(virDomainDiskGetSource(disk)));
rollback_namespace:
if (qemuDomainNamespaceTeardownDisk(vm, disk->src) < 0)
VIR_WARN("Unable to remove /dev entry for %s",
NULLSTR(virDomainDiskGetSource(disk)));
rollback_lock:
if (virDomainLockDiskDetach(driver->lockManager, vm, disk) < 0)
VIR_WARN("Unable to release lock on %s",
NULLSTR(virDomainDiskGetSource(disk)));
cleanup:
if (origsrc)
disk->src = origsrc;
virErrorRestore(&orig_err);
virObjectUnref(cfg);
return ret;
}
static int
qemuHotplugWaitForTrayEject(virDomainObjPtr vm,
virDomainDiskDefPtr disk)
{
unsigned long long now;
int rc;
if (virTimeMillisNow(&now) < 0)
return -1;
while (disk->tray_status != VIR_DOMAIN_DISK_TRAY_OPEN) {
if ((rc = virDomainObjWaitUntil(vm, now + CHANGE_MEDIA_TIMEOUT)) < 0)
return -1;
if (rc > 0) {
/* the caller called qemuMonitorEjectMedia which usually reports an
* error. Report the failure in an off-chance that it didn't. */
if (virGetLastErrorCode() == VIR_ERR_OK) {
virReportError(VIR_ERR_OPERATION_FAILED,
_("timed out waiting to open tray of '%s'"),
disk->dst);
}
return -1;
}
}
return 0;
}
/**
* qemuDomainChangeMediaLegacy:
* @driver: qemu driver structure
* @vm: domain definition
* @disk: disk definition to change the source of
* @newsrc: new disk source to change to
* @force: force the change of media
*
* Change the media in an ejectable device to the one described by
* @newsrc. This function also removes the old source from the
* shared device table if appropriate. Note that newsrc is consumed
* on success and the old source is freed on success.
*
* Returns 0 on success, -1 on error and reports libvirt error
*/
static int
qemuDomainChangeMediaLegacy(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDiskDefPtr disk,
virStorageSourcePtr newsrc,
bool force)
{
int ret = -1, rc;
char *driveAlias = NULL;
qemuDomainObjPrivatePtr priv = vm->privateData;
qemuDomainDiskPrivatePtr diskPriv = QEMU_DOMAIN_DISK_PRIVATE(disk);
qemuDomainStorageSourcePrivatePtr srcPriv = QEMU_DOMAIN_STORAGE_SOURCE_PRIVATE(disk->src);
qemuDomainSecretInfoPtr secinfo = NULL;
const char *format = NULL;
char *sourcestr = NULL;
if (!disk->info.alias) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("missing disk device alias name for %s"), disk->dst);
goto cleanup;
}
if (srcPriv)
secinfo = srcPriv->secinfo;
if (!(driveAlias = qemuAliasDiskDriveFromDisk(disk)))
goto cleanup;
qemuDomainObjEnterMonitor(driver, vm);
rc = qemuMonitorEjectMedia(priv->mon, driveAlias, force);
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
/* If the tray is present and tray change event is supported wait for it to open. */
if (!force && diskPriv->tray &&
virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE_TRAY_MOVED)) {
rc = qemuHotplugWaitForTrayEject(vm, disk);
if (rc < 0)
goto cleanup;
/* re-issue ejection command to pop out the media */
qemuDomainObjEnterMonitor(driver, vm);
rc = qemuMonitorEjectMedia(priv->mon, driveAlias, false);
if (qemuDomainObjExitMonitor(driver, vm) < 0 || rc < 0)
goto cleanup;
} else {
/* otherwise report possible errors from the attempt to eject the media*/
if (rc < 0)
goto cleanup;
}
if (!virStorageSourceIsEmpty(newsrc)) {
if (qemuGetDriveSourceString(newsrc, secinfo, &sourcestr) < 0)
goto cleanup;
if (virStorageSourceGetActualType(newsrc) != VIR_STORAGE_TYPE_DIR) {
if (newsrc->format > 0) {
format = virStorageFileFormatTypeToString(newsrc->format);
} else {
if (disk->src->format > 0)
format = virStorageFileFormatTypeToString(disk->src->format);
}
}
qemuDomainObjEnterMonitor(driver, vm);
rc = qemuMonitorChangeMedia(priv->mon,
driveAlias,
sourcestr,
format);
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
}
if (rc < 0)
goto cleanup;
ret = 0;
cleanup:
VIR_FREE(driveAlias);
VIR_FREE(sourcestr);
return ret;
}
/**
* qemuHotplugAttachManagedPR:
* @driver: QEMU driver object
* @vm: domain object
* @src: new disk source to be attached to @vm
* @asyncJob: asynchronous job identifier
*
* Checks if it's needed to start qemu-pr-helper and add the corresponding
* pr-manager-helper object.
*
* Returns: 0 on success, -1 on error.
*/
static int
qemuHotplugAttachManagedPR(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virStorageSourcePtr src,
qemuDomainAsyncJob asyncJob)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
virJSONValuePtr props = NULL;
bool daemonStarted = false;
int ret = -1;
int rc;
if (priv->prDaemonRunning ||
!virStorageSourceChainHasManagedPR(src))
return 0;
if (!(props = qemuBuildPRManagedManagerInfoProps(priv)))
return -1;
if (qemuProcessStartManagedPRDaemon(vm) < 0)
goto cleanup;
daemonStarted = true;
if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
goto cleanup;
rc = qemuMonitorAddObject(priv->mon, &props, NULL);
if (qemuDomainObjExitMonitor(driver, vm) < 0 || rc < 0)
goto cleanup;
ret = 0;
cleanup:
if (ret < 0 && daemonStarted)
qemuProcessKillManagedPRDaemon(vm);
virJSONValueFree(props);
return ret;
}
/**
* qemuHotplugRemoveManagedPR:
* @driver: QEMU driver object
* @vm: domain object
* @asyncJob: asynchronous job identifier
*
* Removes the managed PR object from @vm if the configuration does not require
* it any more.
*/
static int
qemuHotplugRemoveManagedPR(virQEMUDriverPtr driver,
virDomainObjPtr vm,
qemuDomainAsyncJob asyncJob)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
virErrorPtr orig_err;
int ret = -1;
if (!priv->prDaemonRunning ||
virDomainDefHasManagedPR(vm->def))
return 0;
virErrorPreserveLast(&orig_err);
if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
goto cleanup;
ignore_value(qemuMonitorDelObject(priv->mon, qemuDomainGetManagedPRAlias()));
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
qemuProcessKillManagedPRDaemon(vm);
ret = 0;
cleanup:
virErrorRestore(&orig_err);
return ret;
}
struct _qemuHotplugDiskSourceData {
qemuBlockStorageSourceAttachDataPtr *backends;
size_t nbackends;
};
typedef struct _qemuHotplugDiskSourceData qemuHotplugDiskSourceData;
typedef qemuHotplugDiskSourceData *qemuHotplugDiskSourceDataPtr;
static void
qemuHotplugDiskSourceDataFree(qemuHotplugDiskSourceDataPtr data)
{
size_t i;
if (!data)
return;
for (i = 0; i < data->nbackends; i++)
qemuBlockStorageSourceAttachDataFree(data->backends[i]);
VIR_FREE(data);
}
/**
* qemuDomainRemoveDiskStorageSourcePrepareData:
* @src: disk source structure
* @driveAlias: Alias of the -drive backend, the pointer is always consumed
*
* Prepare qemuBlockStorageSourceAttachDataPtr for detaching a single source
* from a VM. If @driveAlias is NULL -blockdev is assumed.
*/
static qemuBlockStorageSourceAttachDataPtr
qemuHotplugRemoveStorageSourcePrepareData(virStorageSourcePtr src,
char *driveAlias)
{
qemuDomainStorageSourcePrivatePtr srcpriv = QEMU_DOMAIN_STORAGE_SOURCE_PRIVATE(src);
qemuBlockStorageSourceAttachDataPtr data;
qemuBlockStorageSourceAttachDataPtr ret = NULL;
if (VIR_ALLOC(data) < 0)
goto cleanup;
if (driveAlias) {
VIR_STEAL_PTR(data->driveAlias, driveAlias);
data->driveAdded = true;
} else {
data->formatNodeName = src->nodeformat;
data->formatAttached = true;
data->storageNodeName = src->nodestorage;
data->storageAttached = true;
}
if (src->pr &&
!virStoragePRDefIsManaged(src->pr) &&
VIR_STRDUP(data->prmgrAlias, src->pr->mgralias) < 0)
goto cleanup;
if (VIR_STRDUP(data->tlsAlias, src->tlsAlias) < 0)
goto cleanup;
if (srcpriv) {
if (srcpriv->secinfo &&
srcpriv->secinfo->type == VIR_DOMAIN_SECRET_INFO_TYPE_AES &&
VIR_STRDUP(data->authsecretAlias, srcpriv->secinfo->s.aes.alias) < 0)
goto cleanup;
if (srcpriv->encinfo &&
srcpriv->encinfo->type == VIR_DOMAIN_SECRET_INFO_TYPE_AES &&
VIR_STRDUP(data->encryptsecretAlias, srcpriv->encinfo->s.aes.alias) < 0)
goto cleanup;
}
VIR_STEAL_PTR(ret, data);
cleanup:
VIR_FREE(driveAlias);
qemuBlockStorageSourceAttachDataFree(data);
return ret;
}
static qemuHotplugDiskSourceDataPtr
qemuHotplugDiskSourceRemovePrepare(virDomainDiskDefPtr disk,
virQEMUCapsPtr qemuCaps ATTRIBUTE_UNUSED)
{
qemuBlockStorageSourceAttachDataPtr backend = NULL;
qemuHotplugDiskSourceDataPtr data = NULL;
qemuHotplugDiskSourceDataPtr ret = NULL;
char *drivealias = NULL;
if (VIR_ALLOC(data) < 0)
return NULL;
if (!(drivealias = qemuAliasDiskDriveFromDisk(disk)))
goto cleanup;
if (!(backend = qemuHotplugRemoveStorageSourcePrepareData(disk->src,
drivealias)))
goto cleanup;
if (VIR_APPEND_ELEMENT(data->backends, data->nbackends, backend) < 0)
goto cleanup;
VIR_STEAL_PTR(ret, data);
cleanup:
qemuBlockStorageSourceAttachDataFree(backend);
qemuHotplugDiskSourceDataFree(data);
return ret;
}
/**
* qemuHotplugDiskSourceAttachPrepare:
* @disk: disk to generate attachment data for
* @qemuCaps: capabilities of the qemu process
*
* Prepares and returns qemuHotplugDiskSourceData structure filled with all data
* which will fully attach the source backend of the disk to a given VM.
*/
static qemuHotplugDiskSourceDataPtr
qemuHotplugDiskSourceAttachPrepare(virDomainDiskDefPtr disk,
virQEMUCapsPtr qemuCaps)
{
qemuBlockStorageSourceAttachDataPtr backend;
qemuHotplugDiskSourceDataPtr data;
qemuHotplugDiskSourceDataPtr ret = NULL;
if (VIR_ALLOC(data) < 0)
return NULL;
if (!(backend = qemuBuildStorageSourceAttachPrepareDrive(disk, qemuCaps, false)))
goto cleanup;
if (qemuBuildStorageSourceAttachPrepareCommon(disk->src, backend, qemuCaps) < 0)
goto cleanup;
if (VIR_APPEND_ELEMENT(data->backends, data->nbackends, backend) < 0)
goto cleanup;
VIR_STEAL_PTR(ret, data);
cleanup:
qemuBlockStorageSourceAttachDataFree(backend);
qemuHotplugDiskSourceDataFree(data);
return ret;
}
/**
* qemuHotplugDiskSourceAttach:
* @mon: monitor object
* @data: disk backend data object describing what to remove
*
* Attach a disk source backend with all relevant pieces. Caller must enter the
* monitor context for @mon.
*/
static int
qemuHotplugDiskSourceAttach(qemuMonitorPtr mon,
qemuHotplugDiskSourceDataPtr data)
{
size_t i;
for (i = data->nbackends; i > 0; i--) {
if (qemuBlockStorageSourceAttachApply(mon, data->backends[i - 1]) < 0)
return -1;
}
return 0;
}
/**
* qemuHotplugDiskSourceRemove:
* @mon: monitor object
* @data: disk backend data object describing what to remove
*
* Remove a disk source backend with all relevant pieces. This function
* preserves the error which was set prior to calling it. Caller must enter the
* monitor context for @mon.
*/
static void
qemuHotplugDiskSourceRemove(qemuMonitorPtr mon,
qemuHotplugDiskSourceDataPtr data)
{
size_t i;
for (i = 0; i < data->nbackends; i++)
qemuBlockStorageSourceAttachRollback(mon, data->backends[i]);
}
/**
* qemuDomainChangeEjectableMedia:
* @driver: qemu driver structure
* @vm: domain definition
* @disk: disk definition to change the source of
* @newsrc: new disk source to change to
* @force: force the change of media
*
* Change the media in an ejectable device to the one described by
* @newsrc. This function also removes the old source from the
* shared device table if appropriate. Note that newsrc is consumed
* on success and the old source is freed on success.
*
* Returns 0 on success, -1 on error and reports libvirt error
*/
int
qemuDomainChangeEjectableMedia(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDiskDefPtr disk,
virStorageSourcePtr newsrc,
bool force)
{
int ret = -1;
int rc;
if (qemuHotplugPrepareDiskAccess(driver, vm, disk, newsrc, false) < 0)
goto cleanup;
if (qemuHotplugAttachManagedPR(driver, vm, newsrc, QEMU_ASYNC_JOB_NONE) < 0)
goto cleanup;
rc = qemuDomainChangeMediaLegacy(driver, vm, disk, newsrc, force);
virDomainAuditDisk(vm, disk->src, newsrc, "update", rc >= 0);
if (rc < 0) {
ignore_value(qemuHotplugPrepareDiskAccess(driver, vm, disk, newsrc, true));
goto cleanup;
}
/* remove the old source from shared device list */
ignore_value(qemuRemoveSharedDisk(driver, disk, vm->def->name));
ignore_value(qemuHotplugPrepareDiskAccess(driver, vm, disk, NULL, true));
virStorageSourceFree(disk->src);
VIR_STEAL_PTR(disk->src, newsrc);
ignore_value(qemuHotplugRemoveManagedPR(driver, vm, QEMU_ASYNC_JOB_NONE));
ret = 0;
cleanup:
return ret;
}
/**
* qemuDomainAttachDiskGeneric:
*
* Attaches disk to a VM. This function aggregates common code for all bus types.
* In cases when the VM crashed while adding the disk, -2 is returned. */
static int
qemuDomainAttachDiskGeneric(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDiskDefPtr disk)
{
int ret = -1;
qemuDomainObjPrivatePtr priv = vm->privateData;
qemuHotplugDiskSourceDataPtr diskdata = NULL;
char *devstr = NULL;
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
if (qemuHotplugPrepareDiskAccess(driver, vm, disk, NULL, false) < 0)
goto cleanup;
if (qemuAssignDeviceDiskAlias(vm->def, disk) < 0)
goto error;
if (qemuDomainPrepareDiskSource(disk, priv, cfg) < 0)
goto error;
if (!(diskdata = qemuHotplugDiskSourceAttachPrepare(disk, priv->qemuCaps)))
goto error;
if (!(devstr = qemuBuildDiskDeviceStr(vm->def, disk, 0, priv->qemuCaps)))
goto error;
if (VIR_REALLOC_N(vm->def->disks, vm->def->ndisks + 1) < 0)
goto error;
if (qemuHotplugAttachManagedPR(driver, vm, disk->src, QEMU_ASYNC_JOB_NONE) < 0)
goto error;
qemuDomainObjEnterMonitor(driver, vm);
if (qemuHotplugDiskSourceAttach(priv->mon, diskdata) < 0)
goto exit_monitor;
if (qemuMonitorAddDevice(priv->mon, devstr) < 0)
goto exit_monitor;
if (qemuDomainObjExitMonitor(driver, vm) < 0) {
ret = -2;
goto error;
}
virDomainAuditDisk(vm, NULL, disk->src, "attach", true);
virDomainDiskInsertPreAlloced(vm->def, disk);
ret = 0;
cleanup:
qemuHotplugDiskSourceDataFree(diskdata);
qemuDomainSecretDiskDestroy(disk);
VIR_FREE(devstr);
virObjectUnref(cfg);
return ret;
exit_monitor:
qemuHotplugDiskSourceRemove(priv->mon, diskdata);
if (qemuDomainObjExitMonitor(driver, vm) < 0)
ret = -2;
if (qemuHotplugRemoveManagedPR(driver, vm, QEMU_ASYNC_JOB_NONE) < 0)
ret = -2;
virDomainAuditDisk(vm, NULL, disk->src, "attach", false);
error:
ignore_value(qemuHotplugPrepareDiskAccess(driver, vm, disk, NULL, true));
goto cleanup;
}
static int
qemuDomainAttachVirtioDiskDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDiskDefPtr disk)
{
virDomainDeviceDef dev = { VIR_DOMAIN_DEVICE_DISK, { .disk = disk } };
bool releaseaddr = false;
int rv;
if (qemuDomainEnsureVirtioAddress(&releaseaddr, vm, &dev, disk->dst) < 0)
return -1;
if ((rv = qemuDomainAttachDiskGeneric(driver, vm, disk)) < 0) {
if (rv == -1 && releaseaddr)
qemuDomainReleaseDeviceAddress(vm, &disk->info, disk->dst);
return -1;
}
return 0;
}
int qemuDomainAttachControllerDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainControllerDefPtr controller)
{
int ret = -1;
const char* type = virDomainControllerTypeToString(controller->type);
char *devstr = NULL;
qemuDomainObjPrivatePtr priv = vm->privateData;
virDomainDeviceDef dev = { VIR_DOMAIN_DEVICE_CONTROLLER,
{ .controller = controller } };
bool releaseaddr = false;
if (controller->type != VIR_DOMAIN_CONTROLLER_TYPE_SCSI) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("'%s' controller cannot be hot plugged."),
virDomainControllerTypeToString(controller->type));
return -1;
}
/* default idx would normally be set by virDomainDefPostParse(),
* which isn't called in the case of live attach of a single
* device.
*/
if (controller->idx == -1)
controller->idx = virDomainControllerFindUnusedIndex(vm->def,
controller->type);
if (virDomainControllerFind(vm->def, controller->type, controller->idx) >= 0) {
virReportError(VIR_ERR_OPERATION_FAILED,
_("target %s:%d already exists"),
type, controller->idx);
return -1;
}
if (qemuDomainEnsureVirtioAddress(&releaseaddr, vm, &dev, "controller") < 0)
return -1;
if (qemuAssignDeviceControllerAlias(vm->def, priv->qemuCaps, controller) < 0)
goto cleanup;
if (qemuBuildControllerDevStr(vm->def, controller, priv->qemuCaps, &devstr, NULL) < 0)
goto cleanup;
if (!devstr)
goto cleanup;
if (VIR_REALLOC_N(vm->def->controllers, vm->def->ncontrollers+1) < 0)
goto cleanup;
qemuDomainObjEnterMonitor(driver, vm);
ret = qemuMonitorAddDevice(priv->mon, devstr);
if (qemuDomainObjExitMonitor(driver, vm) < 0) {
releaseaddr = false;
ret = -1;
goto cleanup;
}
if (ret == 0)
virDomainControllerInsertPreAlloced(vm->def, controller);
cleanup:
if (ret != 0 && releaseaddr)
qemuDomainReleaseDeviceAddress(vm, &controller->info, NULL);
VIR_FREE(devstr);
return ret;
}
static virDomainControllerDefPtr
qemuDomainFindOrCreateSCSIDiskController(virQEMUDriverPtr driver,
virDomainObjPtr vm,
int controller)
{
size_t i;
virDomainControllerDefPtr cont;
qemuDomainObjPrivatePtr priv = vm->privateData;
int model = -1;
for (i = 0; i < vm->def->ncontrollers; i++) {
cont = vm->def->controllers[i];
if (cont->type != VIR_DOMAIN_CONTROLLER_TYPE_SCSI)
continue;
if (cont->idx == controller)
return cont;
/* Because virDomainHostdevAssignAddress called during
* virDomainHostdevDefPostParse cannot add a new controller
* it will assign a controller index to a controller that doesn't
* exist leaving this code to perform the magic of adding the
* controller. Because that code would be attempting to add a
* SCSI disk to an existing controller, let's save the model
* of the "last" SCSI controller we find so that if we end up
* creating a controller below it uses the same controller model. */
model = cont->model;
}
/* No SCSI controller present, for backward compatibility we
* now hotplug a controller */
if (VIR_ALLOC(cont) < 0)
return NULL;
cont->type = VIR_DOMAIN_CONTROLLER_TYPE_SCSI;
cont->idx = controller;
if (model == VIR_DOMAIN_CONTROLLER_MODEL_SCSI_DEFAULT)
cont->model = qemuDomainGetSCSIControllerModel(vm->def, cont, priv->qemuCaps);
else
cont->model = model;
VIR_INFO("No SCSI controller present, hotplugging one model=%s",
virDomainControllerModelSCSITypeToString(cont->model));
if (qemuDomainAttachControllerDevice(driver, vm, cont) < 0) {
VIR_FREE(cont);
return NULL;
}
if (!virDomainObjIsActive(vm)) {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
_("guest unexpectedly quit"));
/* cont doesn't need freeing here, since the reference
* now held in def->controllers */
return NULL;
}
return cont;
}
static int
qemuDomainAttachSCSIDisk(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDiskDefPtr disk)
{
size_t i;
/* We should have an address already, so make sure */
if (disk->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_DRIVE) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("unexpected disk address type %s"),
virDomainDeviceAddressTypeToString(disk->info.type));
return -1;
}
/* Let's make sure the disk has a controller defined and loaded before
* trying to add it. The controller used by the disk must exist before a
* qemu command line string is generated.
*
* Ensure that the given controller and all controllers with a smaller index
* exist; there must not be any missing index in between.
*/
for (i = 0; i <= disk->info.addr.drive.controller; i++) {
if (!qemuDomainFindOrCreateSCSIDiskController(driver, vm, i))
return -1;
}
if (qemuDomainAttachDiskGeneric(driver, vm, disk) < 0)
return -1;
return 0;
}
static int
qemuDomainAttachUSBMassStorageDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDiskDefPtr disk)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
if (virDomainUSBAddressEnsure(priv->usbaddrs, &disk->info) < 0)
return -1;
if (qemuDomainAttachDiskGeneric(driver, vm, disk) < 0) {
virDomainUSBAddressRelease(priv->usbaddrs, &disk->info);
return -1;
}
return 0;
}
int
qemuDomainAttachDeviceDiskLive(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDeviceDefPtr dev)
{
size_t i;
virDomainDiskDefPtr disk = dev->data.disk;
virDomainDiskDefPtr orig_disk = NULL;
int ret = -1;
if (virDomainDiskTranslateSourcePool(disk) < 0)
goto cleanup;
if (qemuAddSharedDevice(driver, dev, vm->def->name) < 0)
goto cleanup;
if (qemuSetUnprivSGIO(dev) < 0)
goto cleanup;
if (qemuDomainDetermineDiskChain(driver, vm, disk, true) < 0)
goto cleanup;
switch ((virDomainDiskDevice) disk->device) {
case VIR_DOMAIN_DISK_DEVICE_CDROM:
case VIR_DOMAIN_DISK_DEVICE_FLOPPY:
if (!(orig_disk = virDomainDiskFindByBusAndDst(vm->def,
disk->bus, disk->dst))) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("No device with bus '%s' and target '%s'. "
"cdrom and floppy device hotplug isn't supported "
"by libvirt"),
virDomainDiskBusTypeToString(disk->bus),
disk->dst);
goto cleanup;
}
if (qemuDomainChangeEjectableMedia(driver, vm, orig_disk,
disk->src, false) < 0)
goto cleanup;
disk->src = NULL;
ret = 0;
break;
case VIR_DOMAIN_DISK_DEVICE_DISK:
case VIR_DOMAIN_DISK_DEVICE_LUN:
for (i = 0; i < vm->def->ndisks; i++) {
if (virDomainDiskDefCheckDuplicateInfo(vm->def->disks[i], disk) < 0)
goto cleanup;
}
switch ((virDomainDiskBus) disk->bus) {
case VIR_DOMAIN_DISK_BUS_USB:
if (disk->device == VIR_DOMAIN_DISK_DEVICE_LUN) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("disk device='lun' is not supported for usb bus"));
break;
}
ret = qemuDomainAttachUSBMassStorageDevice(driver, vm, disk);
break;
case VIR_DOMAIN_DISK_BUS_VIRTIO:
ret = qemuDomainAttachVirtioDiskDevice(driver, vm, disk);
break;
case VIR_DOMAIN_DISK_BUS_SCSI:
ret = qemuDomainAttachSCSIDisk(driver, vm, disk);
break;
case VIR_DOMAIN_DISK_BUS_IDE:
case VIR_DOMAIN_DISK_BUS_FDC:
case VIR_DOMAIN_DISK_BUS_XEN:
case VIR_DOMAIN_DISK_BUS_UML:
case VIR_DOMAIN_DISK_BUS_SATA:
case VIR_DOMAIN_DISK_BUS_SD:
/* Note that SD card hotplug support should be added only once
* they support '-device' (don't require -drive only).
* See also: qemuDiskBusNeedsDriveArg */
case VIR_DOMAIN_DISK_BUS_LAST:
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("disk bus '%s' cannot be hotplugged."),
virDomainDiskBusTypeToString(disk->bus));
}
break;
case VIR_DOMAIN_DISK_DEVICE_LAST:
break;
}
cleanup:
if (ret != 0)
ignore_value(qemuRemoveSharedDevice(driver, dev, vm->def->name));
return ret;
}
static void
qemuDomainNetDeviceVportRemove(virDomainNetDefPtr net)
{
virNetDevVPortProfilePtr vport = virDomainNetGetActualVirtPortProfile(net);
const char *brname;
if (!vport)
return;
if (vport->virtPortType == VIR_NETDEV_VPORT_PROFILE_MIDONET) {
ignore_value(virNetDevMidonetUnbindPort(vport));
} else if (vport->virtPortType == VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH) {
brname = virDomainNetGetActualBridgeName(net);
ignore_value(virNetDevOpenvswitchRemovePort(brname, net->ifname));
}
}
int
qemuDomainAttachNetDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainNetDefPtr net)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
virDomainDeviceDef dev = { VIR_DOMAIN_DEVICE_NET, { .net = net } };
virErrorPtr originalError = NULL;
char **tapfdName = NULL;
int *tapfd = NULL;
size_t tapfdSize = 0;
char **vhostfdName = NULL;
int *vhostfd = NULL;
size_t vhostfdSize = 0;
size_t queueSize = 0;
char *nicstr = NULL;
char *netstr = NULL;
int ret = -1;
bool releaseaddr = false;
bool iface_connected = false;
virDomainNetType actualType;
virNetDevBandwidthPtr actualBandwidth;
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
virDomainCCWAddressSetPtr ccwaddrs = NULL;
size_t i;
char *charDevAlias = NULL;
bool charDevPlugged = false;
bool netdevPlugged = false;
char *netdev_name;
virErrorPtr save_error = NULL;
/* preallocate new slot for device */
if (VIR_REALLOC_N(vm->def->nets, vm->def->nnets + 1) < 0)
goto cleanup;
/* If appropriate, grab a physical device from the configured
* network's pool of devices, or resolve bridge device name
* to the one defined in the network definition.
*/
if (virDomainNetAllocateActualDevice(vm->def, net) < 0)
goto cleanup;
actualType = virDomainNetGetActualType(net);
/* Currently only TAP/macvtap devices supports multiqueue. */
if (net->driver.virtio.queues > 0 &&
!(actualType == VIR_DOMAIN_NET_TYPE_NETWORK ||
actualType == VIR_DOMAIN_NET_TYPE_BRIDGE ||
actualType == VIR_DOMAIN_NET_TYPE_DIRECT ||
actualType == VIR_DOMAIN_NET_TYPE_ETHERNET ||
actualType == VIR_DOMAIN_NET_TYPE_VHOSTUSER)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
_("Multiqueue network is not supported for: %s"),
virDomainNetTypeToString(actualType));
return -1;
}
/* and only TAP devices support nwfilter rules */
if (net->filter &&
!(actualType == VIR_DOMAIN_NET_TYPE_NETWORK ||
actualType == VIR_DOMAIN_NET_TYPE_BRIDGE ||
actualType == VIR_DOMAIN_NET_TYPE_ETHERNET)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
_("filterref is not supported for "
"network interfaces of type %s"),
virDomainNetTypeToString(actualType));
return -1;
}
if (qemuAssignDeviceNetAlias(vm->def, net, -1) < 0)
goto cleanup;
switch (actualType) {
case VIR_DOMAIN_NET_TYPE_BRIDGE:
case VIR_DOMAIN_NET_TYPE_NETWORK:
tapfdSize = vhostfdSize = net->driver.virtio.queues;
if (!tapfdSize)
tapfdSize = vhostfdSize = 1;
queueSize = tapfdSize;
if (VIR_ALLOC_N(tapfd, tapfdSize) < 0)
goto cleanup;
memset(tapfd, -1, sizeof(*tapfd) * tapfdSize);
if (VIR_ALLOC_N(vhostfd, vhostfdSize) < 0)
goto cleanup;
memset(vhostfd, -1, sizeof(*vhostfd) * vhostfdSize);
if (qemuInterfaceBridgeConnect(vm->def, driver, net,
tapfd, &tapfdSize) < 0)
goto cleanup;
iface_connected = true;
if (qemuInterfaceOpenVhostNet(vm->def, net, vhostfd, &vhostfdSize) < 0)
goto cleanup;
break;
case VIR_DOMAIN_NET_TYPE_DIRECT:
tapfdSize = vhostfdSize = net->driver.virtio.queues;
if (!tapfdSize)
tapfdSize = vhostfdSize = 1;
queueSize = tapfdSize;
if (VIR_ALLOC_N(tapfd, tapfdSize) < 0)
goto cleanup;
memset(tapfd, -1, sizeof(*tapfd) * tapfdSize);
if (VIR_ALLOC_N(vhostfd, vhostfdSize) < 0)
goto cleanup;
memset(vhostfd, -1, sizeof(*vhostfd) * vhostfdSize);
if (qemuInterfaceDirectConnect(vm->def, driver, net,
tapfd, tapfdSize,
VIR_NETDEV_VPORT_PROFILE_OP_CREATE) < 0)
goto cleanup;
iface_connected = true;
if (qemuInterfaceOpenVhostNet(vm->def, net, vhostfd, &vhostfdSize) < 0)
goto cleanup;
break;
case VIR_DOMAIN_NET_TYPE_ETHERNET:
tapfdSize = vhostfdSize = net->driver.virtio.queues;
if (!tapfdSize)
tapfdSize = vhostfdSize = 1;
queueSize = tapfdSize;
if (VIR_ALLOC_N(tapfd, tapfdSize) < 0)
goto cleanup;
memset(tapfd, -1, sizeof(*tapfd) * tapfdSize);
if (VIR_ALLOC_N(vhostfd, vhostfdSize) < 0)
goto cleanup;
memset(vhostfd, -1, sizeof(*vhostfd) * vhostfdSize);
if (qemuInterfaceEthernetConnect(vm->def, driver, net,
tapfd, tapfdSize) < 0)
goto cleanup;
iface_connected = true;
if (qemuInterfaceOpenVhostNet(vm->def, net, vhostfd, &vhostfdSize) < 0)
goto cleanup;
break;
case VIR_DOMAIN_NET_TYPE_HOSTDEV:
/* This is really a "smart hostdev", so it should be attached
* as a hostdev (the hostdev code will reach over into the
* netdev-specific code as appropriate), then also added to
* the nets list (see cleanup:) if successful.
*/
ret = qemuDomainAttachHostDevice(driver, vm,
virDomainNetGetActualHostdev(net));
goto cleanup;
break;
case VIR_DOMAIN_NET_TYPE_VHOSTUSER:
queueSize = net->driver.virtio.queues;
if (!queueSize)
queueSize = 1;
if (!qemuDomainSupportsNicdev(vm->def, net)) {
virReportError(VIR_ERR_INTERNAL_ERROR,
"%s", _("Nicdev support unavailable"));
goto cleanup;
}
if (!(charDevAlias = qemuAliasChardevFromDevAlias(net->info.alias)))
goto cleanup;
break;
case VIR_DOMAIN_NET_TYPE_USER:
/* No preparation needed. */
break;
case VIR_DOMAIN_NET_TYPE_SERVER:
case VIR_DOMAIN_NET_TYPE_CLIENT:
case VIR_DOMAIN_NET_TYPE_MCAST:
case VIR_DOMAIN_NET_TYPE_INTERNAL:
case VIR_DOMAIN_NET_TYPE_UDP:
case VIR_DOMAIN_NET_TYPE_LAST:
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("hotplug of interface type of %s is not implemented yet"),
virDomainNetTypeToString(actualType));
goto cleanup;
}
/* Set device online immediately */
if (qemuInterfaceStartDevice(net) < 0)
goto cleanup;
/* Set bandwidth or warn if requested and not supported. */
actualBandwidth = virDomainNetGetActualBandwidth(net);
if (actualBandwidth) {
if (virNetDevSupportBandwidth(actualType)) {
if (virNetDevBandwidthSet(net->ifname, actualBandwidth, false,
!virDomainNetTypeSharesHostView(net)) < 0)
goto cleanup;
} else {
VIR_WARN("setting bandwidth on interfaces of "
"type '%s' is not implemented yet",
virDomainNetTypeToString(actualType));
}
}
if (net->mtu &&
virNetDevSetMTU(net->ifname, net->mtu) < 0)
goto cleanup;
for (i = 0; i < tapfdSize; i++) {
if (qemuSecuritySetTapFDLabel(driver->securityManager,
vm->def, tapfd[i]) < 0)
goto cleanup;
}
if (qemuDomainIsS390CCW(vm->def) &&
virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_CCW)) {
net->info.type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCW;
if (!(ccwaddrs = virDomainCCWAddressSetCreateFromDomain(vm->def)))
goto cleanup;
if (virDomainCCWAddressAssign(&net->info, ccwaddrs,
!net->info.addr.ccw.assigned) < 0)
goto cleanup;
} else if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_VIRTIO_S390)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("virtio-s390 net device cannot be hotplugged."));
goto cleanup;
} else if (qemuDomainEnsurePCIAddress(vm, &dev, driver) < 0) {
goto cleanup;
}
releaseaddr = true;
if (VIR_ALLOC_N(tapfdName, tapfdSize) < 0 ||
VIR_ALLOC_N(vhostfdName, vhostfdSize) < 0)
goto cleanup;
for (i = 0; i < tapfdSize; i++) {
if (virAsprintf(&tapfdName[i], "fd-%s%zu", net->info.alias, i) < 0)
goto cleanup;
}
for (i = 0; i < vhostfdSize; i++) {
if (virAsprintf(&vhostfdName[i], "vhostfd-%s%zu", net->info.alias, i) < 0)
goto cleanup;
}
if (!(netstr = qemuBuildHostNetStr(net, driver,
tapfdName, tapfdSize,
vhostfdName, vhostfdSize)))
goto cleanup;
qemuDomainObjEnterMonitor(driver, vm);
if (actualType == VIR_DOMAIN_NET_TYPE_VHOSTUSER) {
if (qemuMonitorAttachCharDev(priv->mon, charDevAlias, net->data.vhostuser) < 0) {
ignore_value(qemuDomainObjExitMonitor(driver, vm));
virDomainAuditNet(vm, NULL, net, "attach", false);
goto cleanup;
}
charDevPlugged = true;
}
if (qemuMonitorAddNetdev(priv->mon, netstr,
tapfd, tapfdName, tapfdSize,
vhostfd, vhostfdName, vhostfdSize) < 0) {
ignore_value(qemuDomainObjExitMonitor(driver, vm));
virDomainAuditNet(vm, NULL, net, "attach", false);
goto try_remove;
}
netdevPlugged = true;
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
for (i = 0; i < tapfdSize; i++)
VIR_FORCE_CLOSE(tapfd[i]);
for (i = 0; i < vhostfdSize; i++)
VIR_FORCE_CLOSE(vhostfd[i]);
if (!(nicstr = qemuBuildNicDevStr(vm->def, net, 0,
queueSize, priv->qemuCaps)))
goto try_remove;
qemuDomainObjEnterMonitor(driver, vm);
if (qemuMonitorAddDevice(priv->mon, nicstr) < 0) {
ignore_value(qemuDomainObjExitMonitor(driver, vm));
virDomainAuditNet(vm, NULL, net, "attach", false);
goto try_remove;
}
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
/* set link state */
if (net->linkstate == VIR_DOMAIN_NET_INTERFACE_LINK_STATE_DOWN) {
if (!net->info.alias) {
virReportError(VIR_ERR_OPERATION_FAILED, "%s",
_("device alias not found: cannot set link state to down"));
} else {
qemuDomainObjEnterMonitor(driver, vm);
if (qemuMonitorSetLink(priv->mon, net->info.alias, VIR_DOMAIN_NET_INTERFACE_LINK_STATE_DOWN) < 0) {
ignore_value(qemuDomainObjExitMonitor(driver, vm));
virDomainAuditNet(vm, NULL, net, "attach", false);
goto try_remove;
}
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
}
/* link set to down */
}
virDomainAuditNet(vm, NULL, net, "attach", true);
ret = 0;
cleanup:
if (!ret) {
vm->def->nets[vm->def->nnets++] = net;
} else {
if (releaseaddr)
qemuDomainReleaseDeviceAddress(vm, &net->info, NULL);
if (iface_connected) {
virErrorPreserveLast(&save_error);
virDomainConfNWFilterTeardown(net);
virErrorRestore(&save_error);
if (virDomainNetGetActualType(net) == VIR_DOMAIN_NET_TYPE_DIRECT) {
ignore_value(virNetDevMacVLanDeleteWithVPortProfile(
net->ifname, &net->mac,
virDomainNetGetActualDirectDev(net),
virDomainNetGetActualDirectMode(net),
virDomainNetGetActualVirtPortProfile(net),
cfg->stateDir));
}
qemuDomainNetDeviceVportRemove(net);
}
virDomainNetRemoveHostdev(vm->def, net);
virDomainNetReleaseActualDevice(vm->def, net);
}
VIR_FREE(nicstr);
VIR_FREE(netstr);
for (i = 0; tapfd && i < tapfdSize; i++) {
VIR_FORCE_CLOSE(tapfd[i]);
if (tapfdName)
VIR_FREE(tapfdName[i]);
}
VIR_FREE(tapfd);
VIR_FREE(tapfdName);
for (i = 0; vhostfd && i < vhostfdSize; i++) {
VIR_FORCE_CLOSE(vhostfd[i]);
if (vhostfdName)
VIR_FREE(vhostfdName[i]);
}
VIR_FREE(vhostfd);
VIR_FREE(vhostfdName);
VIR_FREE(charDevAlias);
virObjectUnref(cfg);
virDomainCCWAddressSetFree(ccwaddrs);
return ret;
try_remove:
if (!virDomainObjIsActive(vm))
goto cleanup;
virErrorPreserveLast(&originalError);
if (virAsprintf(&netdev_name, "host%s", net->info.alias) >= 0) {
qemuDomainObjEnterMonitor(driver, vm);
if (charDevPlugged &&
qemuMonitorDetachCharDev(priv->mon, charDevAlias) < 0)
VIR_WARN("Failed to remove associated chardev %s", charDevAlias);
if (netdevPlugged &&
qemuMonitorRemoveNetdev(priv->mon, netdev_name) < 0)
VIR_WARN("Failed to remove network backend for netdev %s",
netdev_name);
ignore_value(qemuDomainObjExitMonitor(driver, vm));
VIR_FREE(netdev_name);
}
virErrorRestore(&originalError);
goto cleanup;
}
static int
qemuDomainAttachHostPCIDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainHostdevDefPtr hostdev)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
virDomainDeviceDef dev = { VIR_DOMAIN_DEVICE_HOSTDEV,
{ .hostdev = hostdev } };
virDomainDeviceInfoPtr info = hostdev->info;
int ret;
char *devstr = NULL;
int configfd = -1;
char *configfd_name = NULL;
bool releaseaddr = false;
bool teardowncgroup = false;
bool teardownlabel = false;
bool teardowndevice = false;
int backend;
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
unsigned int flags = 0;
if (VIR_REALLOC_N(vm->def->hostdevs, vm->def->nhostdevs + 1) < 0)
goto cleanup;
if (!cfg->relaxedACS)
flags |= VIR_HOSTDEV_STRICT_ACS_CHECK;
if (qemuHostdevPreparePCIDevices(driver, vm->def->name, vm->def->uuid,
&hostdev, 1, priv->qemuCaps, flags) < 0)
goto cleanup;
/* this could have been changed by qemuHostdevPreparePCIDevices */
backend = hostdev->source.subsys.u.pci.backend;
switch ((virDomainHostdevSubsysPCIBackendType)backend) {
case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO:
if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE_VFIO_PCI)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("VFIO PCI device assignment is not "
"supported by this version of qemu"));
goto error;
}
break;
case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT:
case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_KVM:
break;
case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN:
case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_TYPE_LAST:
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
_("QEMU does not support device assignment mode '%s'"),
virDomainHostdevSubsysPCIBackendTypeToString(backend));
goto error;
break;
}
/* Temporarily add the hostdev to the domain definition. This is needed
* because qemuDomainAdjustMaxMemLock() requires the hostdev to be already
* part of the domain definition, but other functions like
* qemuAssignDeviceHostdevAlias() used below expect it *not* to be there.
* A better way to handle this would be nice */
vm->def->hostdevs[vm->def->nhostdevs++] = hostdev;
if (qemuDomainAdjustMaxMemLock(vm) < 0) {
vm->def->hostdevs[--(vm->def->nhostdevs)] = NULL;
goto error;
}
vm->def->hostdevs[--(vm->def->nhostdevs)] = NULL;
if (qemuDomainNamespaceSetupHostdev(vm, hostdev) < 0)
goto error;
teardowndevice = true;
if (qemuSetupHostdevCgroup(vm, hostdev) < 0)
goto error;
teardowncgroup = true;
if (qemuSecuritySetHostdevLabel(driver, vm, hostdev) < 0)
goto error;
if (backend != VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO)
teardownlabel = true;
if (qemuAssignDeviceHostdevAlias(vm->def, &info->alias, -1) < 0)
goto error;
if (qemuDomainIsPSeries(vm->def)) {
/* Isolation groups are only relevant for pSeries guests */
if (qemuDomainFillDeviceIsolationGroup(vm->def, &dev) < 0)
goto error;
}
if (qemuDomainEnsurePCIAddress(vm, &dev, driver) < 0)
goto error;
releaseaddr = true;
if (backend != VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO &&
virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_PCI_CONFIGFD)) {
configfd = qemuOpenPCIConfig(hostdev);
if (configfd >= 0) {
if (virAsprintf(&configfd_name, "fd-%s", info->alias) < 0)
goto error;
}
}
if (!virDomainObjIsActive(vm)) {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
_("guest unexpectedly quit during hotplug"));
goto error;
}
if (!(devstr = qemuBuildPCIHostdevDevStr(vm->def, hostdev, 0,
configfd_name, priv->qemuCaps)))
goto error;
qemuDomainObjEnterMonitor(driver, vm);
ret = qemuMonitorAddDeviceWithFd(priv->mon, devstr,
configfd, configfd_name);
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto error;
virDomainAuditHostdev(vm, hostdev, "attach", ret == 0);
if (ret < 0)
goto error;
vm->def->hostdevs[vm->def->nhostdevs++] = hostdev;
VIR_FREE(devstr);
VIR_FREE(configfd_name);
VIR_FORCE_CLOSE(configfd);
virObjectUnref(cfg);
return 0;
error:
if (teardowncgroup && qemuTeardownHostdevCgroup(vm, hostdev) < 0)
VIR_WARN("Unable to remove host device cgroup ACL on hotplug fail");
if (teardownlabel &&
qemuSecurityRestoreHostdevLabel(driver, vm, hostdev) < 0)
VIR_WARN("Unable to restore host device labelling on hotplug fail");
if (teardowndevice &&
qemuDomainNamespaceTeardownHostdev(vm, hostdev) < 0)
VIR_WARN("Unable to remove host device from /dev");
if (releaseaddr)
qemuDomainReleaseDeviceAddress(vm, info, NULL);
qemuHostdevReAttachPCIDevices(driver, vm->def->name, &hostdev, 1);
VIR_FREE(devstr);
VIR_FREE(configfd_name);
VIR_FORCE_CLOSE(configfd);
cleanup:
virObjectUnref(cfg);
return -1;
}
void
qemuDomainDelTLSObjects(virQEMUDriverPtr driver,
virDomainObjPtr vm,
qemuDomainAsyncJob asyncJob,
const char *secAlias,
const char *tlsAlias)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
virErrorPtr orig_err;
if (!tlsAlias && !secAlias)
return;
virErrorPreserveLast(&orig_err);
if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
goto cleanup;
if (tlsAlias)
ignore_value(qemuMonitorDelObject(priv->mon, tlsAlias));
if (secAlias)
ignore_value(qemuMonitorDelObject(priv->mon, secAlias));
ignore_value(qemuDomainObjExitMonitor(driver, vm));
cleanup:
virErrorRestore(&orig_err);
}
int
qemuDomainAddTLSObjects(virQEMUDriverPtr driver,
virDomainObjPtr vm,
qemuDomainAsyncJob asyncJob,
virJSONValuePtr *secProps,
virJSONValuePtr *tlsProps)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
virErrorPtr orig_err;
char *secAlias = NULL;
if (!tlsProps && !secProps)
return 0;
if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
return -1;
if (secProps && *secProps &&
qemuMonitorAddObject(priv->mon, secProps, &secAlias) < 0)
goto error;
if (tlsProps &&
qemuMonitorAddObject(priv->mon, tlsProps, NULL) < 0)
goto error;
VIR_FREE(secAlias);
return qemuDomainObjExitMonitor(driver, vm);
error:
virErrorPreserveLast(&orig_err);
ignore_value(qemuDomainObjExitMonitor(driver, vm));
virErrorRestore(&orig_err);
qemuDomainDelTLSObjects(driver, vm, asyncJob, secAlias, NULL);
VIR_FREE(secAlias);
return -1;
}
int
qemuDomainGetTLSObjects(virQEMUCapsPtr qemuCaps,
qemuDomainSecretInfoPtr secinfo,
const char *tlsCertdir,
bool tlsListen,
bool tlsVerify,
const char *alias,
virJSONValuePtr *tlsProps,
virJSONValuePtr *secProps)
{
const char *secAlias = NULL;
if (secinfo) {
if (qemuBuildSecretInfoProps(secinfo, secProps) < 0)
return -1;
secAlias = secinfo->s.aes.alias;
}
if (qemuBuildTLSx509BackendProps(tlsCertdir, tlsListen, tlsVerify,
alias, secAlias, qemuCaps, tlsProps) < 0)
return -1;
return 0;
}
static int
qemuDomainAddChardevTLSObjects(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainChrSourceDefPtr dev,
char *devAlias,
char *charAlias,
char **tlsAlias,
const char **secAlias)
{
int ret = -1;
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
qemuDomainObjPrivatePtr priv = vm->privateData;
qemuDomainChrSourcePrivatePtr chrSourcePriv;
qemuDomainSecretInfoPtr secinfo = NULL;
virJSONValuePtr tlsProps = NULL;
virJSONValuePtr secProps = NULL;
/* NB: This may alter haveTLS based on cfg */
qemuDomainPrepareChardevSourceTLS(dev, cfg);
if (dev->type != VIR_DOMAIN_CHR_TYPE_TCP ||
dev->data.tcp.haveTLS != VIR_TRISTATE_BOOL_YES) {
ret = 0;
goto cleanup;
}
if (qemuDomainSecretChardevPrepare(cfg, priv, devAlias, dev) < 0)
goto cleanup;
if ((chrSourcePriv = QEMU_DOMAIN_CHR_SOURCE_PRIVATE(dev)))
secinfo = chrSourcePriv->secinfo;
if (secinfo)
*secAlias = secinfo->s.aes.alias;
if (!(*tlsAlias = qemuAliasTLSObjFromSrcAlias(charAlias)))
goto cleanup;
if (qemuDomainGetTLSObjects(priv->qemuCaps, secinfo,
cfg->chardevTLSx509certdir,
dev->data.tcp.listen,
cfg->chardevTLSx509verify,
*tlsAlias, &tlsProps, &secProps) < 0)
goto cleanup;
dev->data.tcp.tlscreds = true;
if (qemuDomainAddTLSObjects(driver, vm, QEMU_ASYNC_JOB_NONE,
&secProps, &tlsProps) < 0)
goto cleanup;
ret = 0;
cleanup:
virJSONValueFree(tlsProps);
virJSONValueFree(secProps);
virObjectUnref(cfg);
return ret;
}
static int
qemuDomainDelChardevTLSObjects(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainChrSourceDefPtr dev,
const char *inAlias)
{
int ret = -1;
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
qemuDomainObjPrivatePtr priv = vm->privateData;
char *tlsAlias = NULL;
char *secAlias = NULL;
if (dev->type != VIR_DOMAIN_CHR_TYPE_TCP ||
dev->data.tcp.haveTLS != VIR_TRISTATE_BOOL_YES) {
ret = 0;
goto cleanup;
}
if (!(tlsAlias = qemuAliasTLSObjFromSrcAlias(inAlias)))
goto cleanup;
/* Best shot at this as the secinfo is destroyed after process launch
* and this path does not recreate it. Thus, if the config has the
* secret UUID and we have a serial TCP chardev, then formulate a
* secAlias which we'll attempt to destroy. */
if (cfg->chardevTLSx509secretUUID &&
!(secAlias = qemuDomainGetSecretAESAlias(inAlias, false)))
goto cleanup;
qemuDomainObjEnterMonitor(driver, vm);
ignore_value(qemuMonitorDelObject(priv->mon, tlsAlias));
if (secAlias)
ignore_value(qemuMonitorDelObject(priv->mon, secAlias));
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
ret = 0;
cleanup:
VIR_FREE(tlsAlias);
VIR_FREE(secAlias);
virObjectUnref(cfg);
return ret;
}
int qemuDomainAttachRedirdevDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainRedirdevDefPtr redirdev)
{
int ret = -1;
qemuDomainObjPrivatePtr priv = vm->privateData;
virDomainDefPtr def = vm->def;
char *charAlias = NULL;
char *devstr = NULL;
bool chardevAdded = false;
char *tlsAlias = NULL;
const char *secAlias = NULL;
bool need_release = false;
virErrorPtr orig_err;
if (qemuAssignDeviceRedirdevAlias(def, redirdev, -1) < 0)
goto cleanup;
if (!(charAlias = qemuAliasChardevFromDevAlias(redirdev->info.alias)))
goto cleanup;
if ((virDomainUSBAddressEnsure(priv->usbaddrs, &redirdev->info)) < 0)
goto cleanup;
need_release = true;
if (!(devstr = qemuBuildRedirdevDevStr(def, redirdev, priv->qemuCaps)))
goto cleanup;
if (VIR_REALLOC_N(def->redirdevs, def->nredirdevs+1) < 0)
goto cleanup;
if (qemuDomainAddChardevTLSObjects(driver, vm, redirdev->source,
redirdev->info.alias, charAlias,
&tlsAlias, &secAlias) < 0)
goto audit;
qemuDomainObjEnterMonitor(driver, vm);
if (qemuMonitorAttachCharDev(priv->mon,
charAlias,
redirdev->source) < 0)
goto exit_monitor;
chardevAdded = true;
if (qemuMonitorAddDevice(priv->mon, devstr) < 0)
goto exit_monitor;
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto audit;
def->redirdevs[def->nredirdevs++] = redirdev;
ret = 0;
audit:
virDomainAuditRedirdev(vm, redirdev, "attach", ret == 0);
cleanup:
if (ret < 0 && need_release)
qemuDomainReleaseDeviceAddress(vm, &redirdev->info, NULL);
VIR_FREE(tlsAlias);
VIR_FREE(charAlias);
VIR_FREE(devstr);
return ret;
exit_monitor:
virErrorPreserveLast(&orig_err);
/* detach associated chardev on error */
if (chardevAdded)
ignore_value(qemuMonitorDetachCharDev(priv->mon, charAlias));
ignore_value(qemuDomainObjExitMonitor(driver, vm));
virErrorRestore(&orig_err);
qemuDomainDelTLSObjects(driver, vm, QEMU_ASYNC_JOB_NONE,
secAlias, tlsAlias);
goto audit;
}
static int
qemuDomainChrPreInsert(virDomainDefPtr vmdef,
virDomainChrDefPtr chr)
{
if (chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_CONSOLE &&
chr->targetType == VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
_("attaching serial console is not supported"));
return -1;
}
if (virDomainChrFind(vmdef, chr)) {
virReportError(VIR_ERR_OPERATION_INVALID, "%s",
_("chardev already exists"));
return -1;
}
if (virDomainChrPreAlloc(vmdef, chr) < 0)
return -1;
/* Due to historical reasons, the first console is an alias to the
* first serial device (if such exists). If this is the case, we need to
* create an object for the first console as well.
*/
if (vmdef->nserials == 0 && vmdef->nconsoles == 0 &&
chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_SERIAL) {
if (!vmdef->consoles && VIR_ALLOC(vmdef->consoles) < 0)
return -1;
/* We'll be dealing with serials[0] directly, so NULL is fine here. */
if (!(vmdef->consoles[0] = virDomainChrDefNew(NULL))) {
VIR_FREE(vmdef->consoles);
return -1;
}
vmdef->nconsoles++;
}
return 0;
}
static void
qemuDomainChrInsertPreAlloced(virDomainDefPtr vmdef,
virDomainChrDefPtr chr)
{
virDomainChrInsertPreAlloced(vmdef, chr);
if (vmdef->nserials == 1 && vmdef->nconsoles == 0 &&
chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_SERIAL) {
vmdef->nconsoles = 1;
/* Create an console alias for the serial port */
vmdef->consoles[0]->deviceType = VIR_DOMAIN_CHR_DEVICE_TYPE_CONSOLE;
vmdef->consoles[0]->targetType = VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL;
}
}
static void
qemuDomainChrInsertPreAllocCleanup(virDomainDefPtr vmdef,
virDomainChrDefPtr chr)
{
/* Remove the stub console added by qemuDomainChrPreInsert */
if (vmdef->nserials == 0 && vmdef->nconsoles == 1 &&
chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_SERIAL) {
virDomainChrDefFree(vmdef->consoles[0]);
VIR_FREE(vmdef->consoles);
vmdef->nconsoles = 0;
}
}
int
qemuDomainChrInsert(virDomainDefPtr vmdef,
virDomainChrDefPtr chr)
{
if (qemuDomainChrPreInsert(vmdef, chr) < 0) {
qemuDomainChrInsertPreAllocCleanup(vmdef, chr);
return -1;
}
qemuDomainChrInsertPreAlloced(vmdef, chr);
return 0;
}
virDomainChrDefPtr
qemuDomainChrRemove(virDomainDefPtr vmdef,
virDomainChrDefPtr chr)
{
virDomainChrDefPtr ret;
bool removeCompat;
if (chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_CONSOLE &&
chr->targetType == VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL) {
virReportError(VIR_ERR_OPERATION_INVALID, "%s",
_("detaching serial console is not supported"));
return NULL;
}
/* Due to some crazy backcompat stuff, the first serial device is an alias
* to the first console too. If this is the case, the definition must be
* duplicated as first console device. */
removeCompat = vmdef->nserials && vmdef->nconsoles &&
vmdef->consoles[0]->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_CONSOLE &&
vmdef->consoles[0]->targetType == VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL &&
virDomainChrEquals(vmdef->serials[0], chr);
if (!(ret = virDomainChrRemove(vmdef, chr))) {
virReportError(VIR_ERR_INVALID_ARG, "%s",
_("device not present in domain configuration"));
return NULL;
}
if (removeCompat)
VIR_DELETE_ELEMENT(vmdef->consoles, 0, vmdef->nconsoles);
return ret;
}
/* Returns 1 if the address will need to be released later,
* -1 on error
* 0 otherwise
*/
static int
qemuDomainAttachChrDeviceAssignAddr(virDomainObjPtr vm,
virDomainChrDefPtr chr,
virQEMUDriverPtr driver)
{
virDomainDefPtr def = vm->def;
qemuDomainObjPrivatePtr priv = vm->privateData;
virDomainDeviceDef dev = { VIR_DOMAIN_DEVICE_CHR, { .chr = chr } };
if (chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_CONSOLE &&
chr->targetType == VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_VIRTIO) {
if (virDomainVirtioSerialAddrAutoAssign(def, &chr->info, true) < 0)
return -1;
return 0;
} else if (chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_SERIAL &&
chr->targetType == VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_PCI) {
if (qemuDomainEnsurePCIAddress(vm, &dev, driver) < 0)
return -1;
return 1;
} else if (chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_SERIAL &&
chr->targetType == VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_USB) {
if (virDomainUSBAddressEnsure(priv->usbaddrs, &chr->info) < 0)
return -1;
return 1;
} else if (chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_CHANNEL &&
chr->targetType == VIR_DOMAIN_CHR_CHANNEL_TARGET_TYPE_VIRTIO) {
if (virDomainVirtioSerialAddrAutoAssign(def, &chr->info, false) < 0)
return -1;
return 0;
}
if (chr->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_SERIAL ||
chr->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("Unsupported address type for character device"));
return -1;
}
return 0;
}
int qemuDomainAttachChrDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainChrDefPtr chr)
{
int ret = -1, rc;
qemuDomainObjPrivatePtr priv = vm->privateData;
virErrorPtr orig_err;
virDomainDefPtr vmdef = vm->def;
char *devstr = NULL;
virDomainChrSourceDefPtr dev = chr->source;
char *charAlias = NULL;
bool chardevAttached = false;
bool teardowncgroup = false;
bool teardowndevice = false;
bool teardownlabel = false;
char *tlsAlias = NULL;
const char *secAlias = NULL;
bool need_release = false;
if (chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_CHANNEL &&
qemuDomainPrepareChannel(chr, priv->channelTargetDir) < 0)
goto cleanup;
if (qemuAssignDeviceChrAlias(vmdef, chr, -1) < 0)
goto cleanup;
if ((rc = qemuDomainAttachChrDeviceAssignAddr(vm, chr, driver)) < 0)
goto cleanup;
if (rc == 1)
need_release = true;
if (qemuDomainNamespaceSetupChardev(vm, chr) < 0)
goto cleanup;
teardowndevice = true;
if (qemuSecuritySetChardevLabel(driver, vm, chr) < 0)
goto cleanup;
teardownlabel = true;
if (qemuSetupChardevCgroup(vm, chr) < 0)
goto cleanup;
teardowncgroup = true;
if (qemuBuildChrDeviceStr(&devstr, vmdef, chr, priv->qemuCaps) < 0)
goto cleanup;
if (!(charAlias = qemuAliasChardevFromDevAlias(chr->info.alias)))
goto cleanup;
if (qemuDomainChrPreInsert(vmdef, chr) < 0)
goto cleanup;
if (qemuDomainAddChardevTLSObjects(driver, vm, dev,
chr->info.alias, charAlias,
&tlsAlias, &secAlias) < 0)
goto audit;
qemuDomainObjEnterMonitor(driver, vm);
if (qemuMonitorAttachCharDev(priv->mon, charAlias, chr->source) < 0)
goto exit_monitor;
chardevAttached = true;
if (qemuMonitorAddDevice(priv->mon, devstr) < 0)
goto exit_monitor;
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto audit;
qemuDomainChrInsertPreAlloced(vmdef, chr);
ret = 0;
audit:
virDomainAuditChardev(vm, NULL, chr, "attach", ret == 0);
cleanup:
if (ret < 0) {
if (virDomainObjIsActive(vm))
qemuDomainChrInsertPreAllocCleanup(vmdef, chr);
if (need_release)
qemuDomainReleaseDeviceAddress(vm, &chr->info, NULL);
if (teardowncgroup && qemuTeardownChardevCgroup(vm, chr) < 0)
VIR_WARN("Unable to remove chr device cgroup ACL on hotplug fail");
if (teardownlabel && qemuSecurityRestoreChardevLabel(driver, vm, chr) < 0)
VIR_WARN("Unable to restore security label on char device");
if (teardowndevice && qemuDomainNamespaceTeardownChardev(vm, chr) < 0)
VIR_WARN("Unable to remove chr device from /dev");
}
VIR_FREE(tlsAlias);
VIR_FREE(charAlias);
VIR_FREE(devstr);
return ret;
exit_monitor:
virErrorPreserveLast(&orig_err);
/* detach associated chardev on error */
if (chardevAttached)
qemuMonitorDetachCharDev(priv->mon, charAlias);
ignore_value(qemuDomainObjExitMonitor(driver, vm));
virErrorRestore(&orig_err);
qemuDomainDelTLSObjects(driver, vm, QEMU_ASYNC_JOB_NONE,
secAlias, tlsAlias);
goto audit;
}
int
qemuDomainAttachRNGDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainRNGDefPtr rng)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
virDomainDeviceDef dev = { VIR_DOMAIN_DEVICE_RNG, { .rng = rng } };
virErrorPtr orig_err;
char *devstr = NULL;
char *charAlias = NULL;
char *objAlias = NULL;
char *tlsAlias = NULL;
const char *secAlias = NULL;
bool releaseaddr = false;
bool teardowncgroup = false;
bool teardowndevice = false;
bool chardevAdded = false;
virJSONValuePtr props = NULL;
int ret = -1;
if (qemuAssignDeviceRNGAlias(vm->def, rng) < 0)
goto cleanup;
/* preallocate space for the device definition */
if (VIR_REALLOC_N(vm->def->rngs, vm->def->nrngs + 1) < 0)
goto cleanup;
if (qemuDomainEnsureVirtioAddress(&releaseaddr, vm, &dev, "rng") < 0)
return -1;
if (qemuDomainNamespaceSetupRNG(vm, rng) < 0)
goto cleanup;
teardowndevice = true;
if (qemuSetupRNGCgroup(vm, rng) < 0)
goto cleanup;
teardowncgroup = true;
/* build required metadata */
if (!(devstr = qemuBuildRNGDevStr(vm->def, rng, priv->qemuCaps)))
goto cleanup;
if (qemuBuildRNGBackendProps(rng, priv->qemuCaps, &props) < 0)
goto cleanup;
if (!(charAlias = qemuAliasChardevFromDevAlias(rng->info.alias)))
goto cleanup;
if (rng->backend == VIR_DOMAIN_RNG_BACKEND_EGD) {
if (qemuDomainAddChardevTLSObjects(driver, vm,
rng->source.chardev,
rng->info.alias, charAlias,
&tlsAlias, &secAlias) < 0)
goto audit;
}
qemuDomainObjEnterMonitor(driver, vm);
if (rng->backend == VIR_DOMAIN_RNG_BACKEND_EGD &&
qemuMonitorAttachCharDev(priv->mon, charAlias,
rng->source.chardev) < 0)
goto exit_monitor;
chardevAdded = true;
if (qemuMonitorAddObject(priv->mon, &props, &objAlias) < 0)
goto exit_monitor;
if (qemuMonitorAddDevice(priv->mon, devstr) < 0)
goto exit_monitor;
if (qemuDomainObjExitMonitor(driver, vm) < 0) {
releaseaddr = false;
goto cleanup;
}
VIR_APPEND_ELEMENT_INPLACE(vm->def->rngs, vm->def->nrngs, rng);
ret = 0;
audit:
virDomainAuditRNG(vm, NULL, rng, "attach", ret == 0);
cleanup:
virJSONValueFree(props);
if (ret < 0) {
if (releaseaddr)
qemuDomainReleaseDeviceAddress(vm, &rng->info, NULL);
if (teardowncgroup && qemuTeardownRNGCgroup(vm, rng) < 0)
VIR_WARN("Unable to remove RNG device cgroup ACL on hotplug fail");
if (teardowndevice && qemuDomainNamespaceTeardownRNG(vm, rng) < 0)
VIR_WARN("Unable to remove chr device from /dev");
}
VIR_FREE(tlsAlias);
VIR_FREE(charAlias);
VIR_FREE(objAlias);
VIR_FREE(devstr);
return ret;
exit_monitor:
virErrorPreserveLast(&orig_err);
if (objAlias)
ignore_value(qemuMonitorDelObject(priv->mon, objAlias));
if (rng->backend == VIR_DOMAIN_RNG_BACKEND_EGD && chardevAdded)
ignore_value(qemuMonitorDetachCharDev(priv->mon, charAlias));
if (qemuDomainObjExitMonitor(driver, vm) < 0)
releaseaddr = false;
virErrorRestore(&orig_err);
qemuDomainDelTLSObjects(driver, vm, QEMU_ASYNC_JOB_NONE,
secAlias, tlsAlias);
goto audit;
}
/**
* qemuDomainAttachMemory:
* @driver: qemu driver data
* @vm: VM object
* @mem: Definition of the memory device to be attached. @mem is always consumed
*
* Attaches memory device described by @mem to domain @vm.
*
* Returns 0 on success -1 on error.
*/
int
qemuDomainAttachMemory(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainMemoryDefPtr mem)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
virErrorPtr orig_err;
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
unsigned long long oldmem = virDomainDefGetMemoryTotal(vm->def);
unsigned long long newmem = oldmem + mem->size;
char *devstr = NULL;
char *objalias = NULL;
bool objAdded = false;
bool teardownlabel = false;
bool teardowncgroup = false;
bool teardowndevice = false;
virJSONValuePtr props = NULL;
virObjectEventPtr event;
int id;
int ret = -1;
qemuDomainMemoryDeviceAlignSize(vm->def, mem);
if (qemuDomainDefValidateMemoryHotplug(vm->def, priv->qemuCaps, mem) < 0)
goto cleanup;
if (qemuDomainAssignMemoryDeviceSlot(vm->def, mem) < 0)
goto cleanup;
/* in cases where we are using a VM with aliases generated according to the
* index of the memory device we need to keep continue using that scheme */
if (qemuAssignDeviceMemoryAlias(vm->def, mem, priv->memAliasOrderMismatch) < 0)
goto cleanup;
if (virAsprintf(&objalias, "mem%s", mem->info.alias) < 0)
goto cleanup;
if (!(devstr = qemuBuildMemoryDeviceStr(mem)))
goto cleanup;
if (qemuBuildMemoryBackendProps(&props, objalias, cfg,
priv->qemuCaps, vm->def, mem, NULL, true) < 0)
goto cleanup;
if (qemuProcessBuildDestroyMemoryPaths(driver, vm, mem, true) < 0)
goto cleanup;
if (qemuDomainNamespaceSetupMemory(vm, mem) < 0)
goto cleanup;
teardowndevice = true;
if (qemuSetupMemoryDevicesCgroup(vm, mem) < 0)
goto cleanup;
teardowncgroup = true;
if (qemuSecuritySetMemoryLabel(driver, vm, mem) < 0)
goto cleanup;
teardownlabel = true;
if (virDomainMemoryInsert(vm->def, mem) < 0)
goto cleanup;
if (qemuDomainAdjustMaxMemLock(vm) < 0)
goto removedef;
qemuDomainObjEnterMonitor(driver, vm);
if (qemuMonitorAddObject(priv->mon, &props, NULL) < 0)
goto exit_monitor;
objAdded = true;
if (qemuMonitorAddDevice(priv->mon, devstr) < 0)
goto exit_monitor;
if (qemuDomainObjExitMonitor(driver, vm) < 0) {
/* we shouldn't touch mem now, as the def might be freed */
mem = NULL;
goto audit;
}
event = virDomainEventDeviceAddedNewFromObj(vm, objalias);
virObjectEventStateQueue(driver->domainEventState, event);
/* fix the balloon size */
ignore_value(qemuProcessRefreshBalloonState(driver, vm, QEMU_ASYNC_JOB_NONE));
/* mem is consumed by vm->def */
mem = NULL;
/* this step is best effort, removing the device would be so much trouble */
ignore_value(qemuDomainUpdateMemoryDeviceInfo(driver, vm,
QEMU_ASYNC_JOB_NONE));
ret = 0;
audit:
virDomainAuditMemory(vm, oldmem, newmem, "update", ret == 0);
cleanup:
if (mem && ret < 0) {
if (teardowncgroup && qemuTeardownMemoryDevicesCgroup(vm, mem) < 0)
VIR_WARN("Unable to remove memory device cgroup ACL on hotplug fail");
if (teardownlabel && qemuSecurityRestoreMemoryLabel(driver, vm, mem) < 0)
VIR_WARN("Unable to restore security label on memdev");
if (teardowndevice &&
qemuDomainNamespaceTeardownMemory(vm, mem) < 0)
VIR_WARN("Unable to remove memory device from /dev");
}
virJSONValueFree(props);
virObjectUnref(cfg);
VIR_FREE(devstr);
VIR_FREE(objalias);
virDomainMemoryDefFree(mem);
return ret;
exit_monitor:
virErrorPreserveLast(&orig_err);
if (objAdded)
ignore_value(qemuMonitorDelObject(priv->mon, objalias));
if (qemuDomainObjExitMonitor(driver, vm) < 0)
mem = NULL;
if (objAdded && mem)
ignore_value(qemuProcessDestroyMemoryBackingPath(driver, vm, mem));
virErrorRestore(&orig_err);
if (!mem)
goto audit;
removedef:
if ((id = virDomainMemoryFindByDef(vm->def, mem)) >= 0)
mem = virDomainMemoryRemove(vm->def, id);
else
mem = NULL;
/* reset the mlock limit */
virErrorPreserveLast(&orig_err);
ignore_value(qemuDomainAdjustMaxMemLock(vm));
virErrorRestore(&orig_err);
goto audit;
}
static int
qemuDomainAttachHostUSBDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainHostdevDefPtr hostdev)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
char *devstr = NULL;
bool added = false;
bool teardowncgroup = false;
bool teardownlabel = false;
bool teardowndevice = false;
int ret = -1;
if (virDomainUSBAddressEnsure(priv->usbaddrs, hostdev->info) < 0)
return -1;
if (qemuHostdevPrepareUSBDevices(driver, vm->def->name, &hostdev, 1, 0) < 0)
goto cleanup;
added = true;
if (qemuDomainNamespaceSetupHostdev(vm, hostdev) < 0)
goto cleanup;
teardowndevice = true;
if (qemuSetupHostdevCgroup(vm, hostdev) < 0)
goto cleanup;
teardowncgroup = true;
if (qemuSecuritySetHostdevLabel(driver, vm, hostdev) < 0)
goto cleanup;
teardownlabel = true;
if (qemuAssignDeviceHostdevAlias(vm->def, &hostdev->info->alias, -1) < 0)
goto cleanup;
if (!(devstr = qemuBuildUSBHostdevDevStr(vm->def, hostdev, priv->qemuCaps)))
goto cleanup;
if (VIR_REALLOC_N(vm->def->hostdevs, vm->def->nhostdevs+1) < 0)
goto cleanup;
qemuDomainObjEnterMonitor(driver, vm);
ret = qemuMonitorAddDevice(priv->mon, devstr);
if (qemuDomainObjExitMonitor(driver, vm) < 0) {
ret = -1;
goto cleanup;
}
virDomainAuditHostdev(vm, hostdev, "attach", ret == 0);
if (ret < 0)
goto cleanup;
vm->def->hostdevs[vm->def->nhostdevs++] = hostdev;
ret = 0;
cleanup:
if (ret < 0) {
if (teardowncgroup && qemuTeardownHostdevCgroup(vm, hostdev) < 0)
VIR_WARN("Unable to remove host device cgroup ACL on hotplug fail");
if (teardownlabel &&
qemuSecurityRestoreHostdevLabel(driver, vm, hostdev) < 0)
VIR_WARN("Unable to restore host device labelling on hotplug fail");
if (teardowndevice &&
qemuDomainNamespaceTeardownHostdev(vm, hostdev) < 0)
VIR_WARN("Unable to remove host device from /dev");
if (added)
qemuHostdevReAttachUSBDevices(driver, vm->def->name, &hostdev, 1);
virDomainUSBAddressRelease(priv->usbaddrs, hostdev->info);
}
VIR_FREE(devstr);
return ret;
}
static int
qemuDomainAttachHostSCSIDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainHostdevDefPtr hostdev)
{
size_t i;
int ret = -1;
qemuDomainObjPrivatePtr priv = vm->privateData;
virErrorPtr orig_err;
char *devstr = NULL;
char *drvstr = NULL;
char *drivealias = NULL;
char *secobjAlias = NULL;
bool teardowncgroup = false;
bool teardownlabel = false;
bool teardowndevice = false;
bool driveAdded = false;
virJSONValuePtr secobjProps = NULL;
virDomainHostdevSubsysSCSIPtr scsisrc = &hostdev->source.subsys.u.scsi;
qemuDomainSecretInfoPtr secinfo = NULL;
if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE_SCSI_GENERIC)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("SCSI passthrough is not supported by this version of qemu"));
return -1;
}
/* Let's make sure the disk has a controller defined and loaded before
* trying to add it. The controller used by the disk must exist before a
* qemu command line string is generated.
*
* Ensure that the given controller and all controllers with a smaller index
* exist; there must not be any missing index in between.
*/
for (i = 0; i <= hostdev->info->addr.drive.controller; i++) {
if (!qemuDomainFindOrCreateSCSIDiskController(driver, vm, i))
return -1;
}
if (qemuHostdevPrepareSCSIDevices(driver, vm->def->name, &hostdev, 1) < 0)
return -1;
if (qemuDomainNamespaceSetupHostdev(vm, hostdev) < 0)
goto cleanup;
teardowndevice = true;
if (qemuSetupHostdevCgroup(vm, hostdev) < 0)
goto cleanup;
teardowncgroup = true;
if (qemuSecuritySetHostdevLabel(driver, vm, hostdev) < 0)
goto cleanup;
teardownlabel = true;
if (qemuAssignDeviceHostdevAlias(vm->def, &hostdev->info->alias, -1) < 0)
goto cleanup;
if (qemuDomainSecretHostdevPrepare(priv, hostdev) < 0)
goto cleanup;
if (scsisrc->protocol == VIR_DOMAIN_HOSTDEV_SCSI_PROTOCOL_TYPE_ISCSI) {
qemuDomainStorageSourcePrivatePtr srcPriv =
QEMU_DOMAIN_STORAGE_SOURCE_PRIVATE(scsisrc->u.iscsi.src);
if (srcPriv)
secinfo = srcPriv->secinfo;
}
if (secinfo && secinfo->type == VIR_DOMAIN_SECRET_INFO_TYPE_AES) {
if (qemuBuildSecretInfoProps(secinfo, &secobjProps) < 0)
goto cleanup;
}
if (!(drvstr = qemuBuildSCSIHostdevDrvStr(hostdev, priv->qemuCaps)))
goto cleanup;
if (!(drivealias = qemuAliasFromHostdev(hostdev)))
goto cleanup;
if (!(devstr = qemuBuildSCSIHostdevDevStr(vm->def, hostdev)))
goto cleanup;
if (VIR_REALLOC_N(vm->def->hostdevs, vm->def->nhostdevs + 1) < 0)
goto cleanup;
qemuDomainObjEnterMonitor(driver, vm);
if (secobjProps &&
qemuMonitorAddObject(priv->mon, &secobjProps, &secobjAlias) < 0)
goto exit_monitor;
if (qemuMonitorAddDrive(priv->mon, drvstr) < 0)
goto exit_monitor;
driveAdded = true;
if (qemuMonitorAddDevice(priv->mon, devstr) < 0)
goto exit_monitor;
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
virDomainAuditHostdev(vm, hostdev, "attach", true);
vm->def->hostdevs[vm->def->nhostdevs++] = hostdev;
ret = 0;
cleanup:
if (ret < 0) {
qemuHostdevReAttachSCSIDevices(driver, vm->def->name, &hostdev, 1);
if (teardowncgroup && qemuTeardownHostdevCgroup(vm, hostdev) < 0)
VIR_WARN("Unable to remove host device cgroup ACL on hotplug fail");
if (teardownlabel &&
qemuSecurityRestoreHostdevLabel(driver, vm, hostdev) < 0)
VIR_WARN("Unable to restore host device labelling on hotplug fail");
if (teardowndevice &&
qemuDomainNamespaceTeardownHostdev(vm, hostdev) < 0)
VIR_WARN("Unable to remove host device from /dev");
}
qemuDomainSecretHostdevDestroy(hostdev);
virJSONValueFree(secobjProps);
VIR_FREE(secobjAlias);
VIR_FREE(drivealias);
VIR_FREE(drvstr);
VIR_FREE(devstr);
return ret;
exit_monitor:
virErrorPreserveLast(&orig_err);
if (driveAdded && qemuMonitorDriveDel(priv->mon, drivealias) < 0) {
VIR_WARN("Unable to remove drive %s (%s) after failed "
"qemuMonitorAddDevice",
drvstr, devstr);
}
if (secobjAlias)
ignore_value(qemuMonitorDelObject(priv->mon, secobjAlias));
ignore_value(qemuDomainObjExitMonitor(driver, vm));
virErrorRestore(&orig_err);
virDomainAuditHostdev(vm, hostdev, "attach", false);
goto cleanup;
}
static int
qemuDomainAttachSCSIVHostDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainHostdevDefPtr hostdev)
{
int ret = -1;
qemuDomainObjPrivatePtr priv = vm->privateData;
virDomainDeviceDef dev = { VIR_DOMAIN_DEVICE_HOSTDEV,
{ .hostdev = hostdev } };
virDomainCCWAddressSetPtr ccwaddrs = NULL;
char *vhostfdName = NULL;
int vhostfd = -1;
char *devstr = NULL;
bool teardowncgroup = false;
bool teardownlabel = false;
bool teardowndevice = false;
bool releaseaddr = false;
if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE_SCSI_GENERIC)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("SCSI passthrough is not supported by this version of qemu"));
return -1;
}
if (qemuHostdevPrepareSCSIVHostDevices(driver, vm->def->name, &hostdev, 1) < 0)
return -1;
if (qemuDomainNamespaceSetupHostdev(vm, hostdev) < 0)
goto cleanup;
teardowndevice = true;
if (qemuSetupHostdevCgroup(vm, hostdev) < 0)
goto cleanup;
teardowncgroup = true;
if (qemuSecuritySetHostdevLabel(driver, vm, hostdev) < 0)
goto cleanup;
teardownlabel = true;
if (virSCSIVHostOpenVhostSCSI(&vhostfd) < 0)
goto cleanup;
if (virAsprintf(&vhostfdName, "vhostfd-%d", vhostfd) < 0)
goto cleanup;
if (hostdev->info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE) {
if (qemuDomainIsS390CCW(vm->def) &&
virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_CCW))
hostdev->info->type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCW;
}
if (hostdev->info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE ||
hostdev->info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) {
if (qemuDomainEnsurePCIAddress(vm, &dev, driver) < 0)
goto cleanup;
} else if (hostdev->info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCW) {
if (!(ccwaddrs = virDomainCCWAddressSetCreateFromDomain(vm->def)))
goto cleanup;
if (virDomainCCWAddressAssign(hostdev->info, ccwaddrs,
!hostdev->info->addr.ccw.assigned) < 0)
goto cleanup;
}
releaseaddr = true;
if (qemuAssignDeviceHostdevAlias(vm->def, &hostdev->info->alias, -1) < 0)
goto cleanup;
if (!(devstr = qemuBuildSCSIVHostHostdevDevStr(vm->def,
hostdev,
priv->qemuCaps,
vhostfdName)))
goto cleanup;
if (VIR_REALLOC_N(vm->def->hostdevs, vm->def->nhostdevs + 1) < 0)
goto cleanup;
qemuDomainObjEnterMonitor(driver, vm);
ret = qemuMonitorAddDeviceWithFd(priv->mon, devstr, vhostfd, vhostfdName);
if (qemuDomainObjExitMonitor(driver, vm) < 0 || ret < 0)
goto audit;
vm->def->hostdevs[vm->def->nhostdevs++] = hostdev;
ret = 0;
audit:
virDomainAuditHostdev(vm, hostdev, "attach", (ret == 0));
cleanup:
if (ret < 0) {
if (teardowncgroup && qemuTeardownHostdevCgroup(vm, hostdev) < 0)
VIR_WARN("Unable to remove host device cgroup ACL on hotplug fail");
if (teardownlabel &&
qemuSecurityRestoreHostdevLabel(driver, vm, hostdev) < 0)
VIR_WARN("Unable to restore host device labelling on hotplug fail");
if (teardowndevice &&
qemuDomainNamespaceTeardownHostdev(vm, hostdev) < 0)
VIR_WARN("Unable to remove host device from /dev");
if (releaseaddr)
qemuDomainReleaseDeviceAddress(vm, hostdev->info, NULL);
}
virDomainCCWAddressSetFree(ccwaddrs);
VIR_FORCE_CLOSE(vhostfd);
VIR_FREE(vhostfdName);
VIR_FREE(devstr);
return ret;
}
static int
qemuDomainAttachMediatedDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainHostdevDefPtr hostdev)
{
int ret = -1;
char *devstr = NULL;
bool added = false;
bool teardowncgroup = false;
bool teardownlabel = false;
bool teardowndevice = false;
qemuDomainObjPrivatePtr priv = vm->privateData;
virDomainDeviceDef dev = { VIR_DOMAIN_DEVICE_HOSTDEV,
{ .hostdev = hostdev } };
switch (hostdev->source.subsys.u.mdev.model) {
case VIR_MDEV_MODEL_TYPE_VFIO_PCI:
if (qemuDomainEnsurePCIAddress(vm, &dev, driver) < 0)
return -1;
break;
case VIR_MDEV_MODEL_TYPE_VFIO_CCW:
case VIR_MDEV_MODEL_TYPE_LAST:
break;
}
if (qemuHostdevPrepareMediatedDevices(driver,
vm->def->name,
&hostdev,
1) < 0)
goto cleanup;
added = true;
if (qemuDomainNamespaceSetupHostdev(vm, hostdev) < 0)
goto cleanup;
teardowndevice = true;
if (qemuSetupHostdevCgroup(vm, hostdev) < 0)
goto cleanup;
teardowncgroup = true;
if (qemuSecuritySetHostdevLabel(driver, vm, hostdev) < 0)
goto cleanup;
teardownlabel = true;
if (qemuAssignDeviceHostdevAlias(vm->def, &hostdev->info->alias, -1) < 0)
goto cleanup;
if (!(devstr = qemuBuildHostdevMediatedDevStr(vm->def, hostdev,
priv->qemuCaps)))
goto cleanup;
if (VIR_REALLOC_N(vm->def->hostdevs, vm->def->nhostdevs + 1) < 0)
goto cleanup;
qemuDomainObjEnterMonitor(driver, vm);
ret = qemuMonitorAddDevice(priv->mon, devstr);
if (qemuDomainObjExitMonitor(driver, vm) < 0) {
ret = -1;
goto cleanup;
}
virDomainAuditHostdev(vm, hostdev, "attach", ret == 0);
if (ret < 0)
goto cleanup;
VIR_APPEND_ELEMENT_INPLACE(vm->def->hostdevs, vm->def->nhostdevs, hostdev);
ret = 0;
cleanup:
if (ret < 0) {
if (teardowncgroup && qemuTeardownHostdevCgroup(vm, hostdev) < 0)
VIR_WARN("Unable to remove host device cgroup ACL on hotplug fail");
if (teardownlabel &&
qemuSecurityRestoreHostdevLabel(driver, vm, hostdev) < 0)
VIR_WARN("Unable to restore host device labelling on hotplug fail");
if (teardowndevice &&
qemuDomainNamespaceTeardownHostdev(vm, hostdev) < 0)
VIR_WARN("Unable to remove host device from /dev");
if (added)
qemuHostdevReAttachMediatedDevices(driver,
vm->def->name,
&hostdev,
1);
qemuDomainReleaseDeviceAddress(vm, hostdev->info, NULL);
}
VIR_FREE(devstr);
return ret;
}
int
qemuDomainAttachHostDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainHostdevDefPtr hostdev)
{
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
_("hotplug is not supported for hostdev mode '%s'"),
virDomainHostdevModeTypeToString(hostdev->mode));
return -1;
}
switch (hostdev->source.subsys.type) {
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI:
if (qemuDomainAttachHostPCIDevice(driver, vm,
hostdev) < 0)
goto error;
break;
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB:
if (qemuDomainAttachHostUSBDevice(driver, vm,
hostdev) < 0)
goto error;
break;
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI:
if (qemuDomainAttachHostSCSIDevice(driver, vm,
hostdev) < 0)
goto error;
break;
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI_HOST:
if (qemuDomainAttachSCSIVHostDevice(driver, vm, hostdev) < 0)
goto error;
break;
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_MDEV:
if (qemuDomainAttachMediatedDevice(driver, vm, hostdev) < 0)
goto error;
break;
default:
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
_("hotplug is not supported for hostdev subsys type '%s'"),
virDomainHostdevSubsysTypeToString(hostdev->source.subsys.type));
goto error;
}
return 0;
error:
return -1;
}
int
qemuDomainAttachShmemDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainShmemDefPtr shmem)
{
int ret = -1;
char *shmstr = NULL;
char *charAlias = NULL;
char *memAlias = NULL;
bool release_backing = false;
bool release_address = true;
virErrorPtr orig_err = NULL;
virJSONValuePtr props = NULL;
qemuDomainObjPrivatePtr priv = vm->privateData;
virDomainDeviceDef dev = { VIR_DOMAIN_DEVICE_SHMEM, { .shmem = shmem } };
switch ((virDomainShmemModel)shmem->model) {
case VIR_DOMAIN_SHMEM_MODEL_IVSHMEM_PLAIN:
case VIR_DOMAIN_SHMEM_MODEL_IVSHMEM_DOORBELL:
break;
case VIR_DOMAIN_SHMEM_MODEL_IVSHMEM:
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("live attach of shmem model '%s' is not supported"),
virDomainShmemModelTypeToString(shmem->model));
ATTRIBUTE_FALLTHROUGH;
case VIR_DOMAIN_SHMEM_MODEL_LAST:
return -1;
}
if (qemuAssignDeviceShmemAlias(vm->def, shmem, -1) < 0)
return -1;
if (qemuDomainPrepareShmemChardev(shmem) < 0)
return -1;
if (VIR_REALLOC_N(vm->def->shmems, vm->def->nshmems + 1) < 0)
return -1;
if ((shmem->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE ||
shmem->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) &&
(qemuDomainEnsurePCIAddress(vm, &dev, driver) < 0))
return -1;
if (!(shmstr = qemuBuildShmemDevStr(vm->def, shmem, priv->qemuCaps)))
goto cleanup;
if (shmem->server.enabled) {
if (virAsprintf(&charAlias, "char%s", shmem->info.alias) < 0)
goto cleanup;
} else {
if (!(props = qemuBuildShmemBackendMemProps(shmem)))
goto cleanup;
}
qemuDomainObjEnterMonitor(driver, vm);
if (shmem->server.enabled) {
if (qemuMonitorAttachCharDev(priv->mon, charAlias,
&shmem->server.chr) < 0)
goto exit_monitor;
} else {
if (qemuMonitorAddObject(priv->mon, &props, &memAlias) < 0)
goto exit_monitor;
}
release_backing = true;
if (qemuMonitorAddDevice(priv->mon, shmstr) < 0)
goto exit_monitor;
if (qemuDomainObjExitMonitor(driver, vm) < 0) {
release_address = false;
goto cleanup;
}
/* Doing a copy here just so the pointer doesn't get nullified
* because we need it in the audit function */
VIR_APPEND_ELEMENT_COPY_INPLACE(vm->def->shmems, vm->def->nshmems, shmem);
ret = 0;
release_address = false;
audit:
virDomainAuditShmem(vm, shmem, "attach", ret == 0);
cleanup:
if (release_address)
qemuDomainReleaseDeviceAddress(vm, &shmem->info, NULL);
virJSONValueFree(props);
VIR_FREE(memAlias);
VIR_FREE(charAlias);
VIR_FREE(shmstr);
return ret;
exit_monitor:
virErrorPreserveLast(&orig_err);
if (release_backing) {
if (shmem->server.enabled)
ignore_value(qemuMonitorDetachCharDev(priv->mon, charAlias));
else
ignore_value(qemuMonitorDelObject(priv->mon, memAlias));
}
if (qemuDomainObjExitMonitor(driver, vm) < 0)
release_address = false;
virErrorRestore(&orig_err);
goto audit;
}
int
qemuDomainAttachWatchdog(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainWatchdogDefPtr watchdog)
{
int ret = -1;
qemuDomainObjPrivatePtr priv = vm->privateData;
virDomainDeviceDef dev = { VIR_DOMAIN_DEVICE_WATCHDOG, { .watchdog = watchdog } };
virDomainWatchdogAction actualAction = watchdog->action;
const char *actionStr = NULL;
char *watchdogstr = NULL;
bool releaseAddress = false;
int rv;
if (vm->def->watchdog) {
virReportError(VIR_ERR_OPERATION_INVALID, "%s",
_("domain already has a watchdog"));
return -1;
}
if (qemuAssignDeviceWatchdogAlias(watchdog) < 0)
return -1;
if (!(watchdogstr = qemuBuildWatchdogDevStr(vm->def, watchdog, priv->qemuCaps)))
return -1;
if (watchdog->model == VIR_DOMAIN_WATCHDOG_MODEL_I6300ESB) {
if (qemuDomainEnsurePCIAddress(vm, &dev, driver) < 0)
goto cleanup;
releaseAddress = true;
} else {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("hotplug of watchdog of model %s is not supported"),
virDomainWatchdogModelTypeToString(watchdog->model));
goto cleanup;
}
/* QEMU doesn't have a 'dump' action; we tell qemu to 'pause', then
libvirt listens for the watchdog event, and we perform the dump
ourselves. so convert 'dump' to 'pause' for the qemu cli */
if (actualAction == VIR_DOMAIN_WATCHDOG_ACTION_DUMP)
actualAction = VIR_DOMAIN_WATCHDOG_ACTION_PAUSE;
actionStr = virDomainWatchdogActionTypeToString(actualAction);
qemuDomainObjEnterMonitor(driver, vm);
rv = qemuMonitorSetWatchdogAction(priv->mon, actionStr);
if (rv >= 0)
rv = qemuMonitorAddDevice(priv->mon, watchdogstr);
if (qemuDomainObjExitMonitor(driver, vm) < 0) {
releaseAddress = false;
goto cleanup;
}
if (rv < 0)
goto cleanup;
releaseAddress = false;
vm->def->watchdog = watchdog;
ret = 0;
cleanup:
if (releaseAddress)
qemuDomainReleaseDeviceAddress(vm, &watchdog->info, NULL);
VIR_FREE(watchdogstr);
return ret;
}
int
qemuDomainAttachInputDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainInputDefPtr input)
{
int ret = -1;
char *devstr = NULL;
qemuDomainObjPrivatePtr priv = vm->privateData;
virDomainDeviceDef dev = { VIR_DOMAIN_DEVICE_INPUT,
{ .input = input } };
virErrorPtr originalError = NULL;
bool releaseaddr = false;
bool teardowndevice = false;
bool teardownlabel = false;
bool teardowncgroup = false;
if (input->bus != VIR_DOMAIN_INPUT_BUS_USB &&
input->bus != VIR_DOMAIN_INPUT_BUS_VIRTIO) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("input device on bus '%s' cannot be hot plugged."),
virDomainInputBusTypeToString(input->bus));
return -1;
}
if (input->bus == VIR_DOMAIN_INPUT_BUS_VIRTIO) {
if (qemuDomainEnsureVirtioAddress(&releaseaddr, vm, &dev, "input") < 0)
return -1;
} else if (input->bus == VIR_DOMAIN_INPUT_BUS_USB) {
if (virDomainUSBAddressEnsure(priv->usbaddrs, &input->info) < 0)
goto cleanup;
releaseaddr = true;
}
if (qemuAssignDeviceInputAlias(vm->def, input, -1) < 0)
goto cleanup;
if (qemuBuildInputDevStr(&devstr, vm->def, input, priv->qemuCaps) < 0)
goto cleanup;
if (qemuDomainNamespaceSetupInput(vm, input) < 0)
goto cleanup;
teardowndevice = true;
if (qemuSetupInputCgroup(vm, input) < 0)
goto cleanup;
teardowncgroup = true;
if (qemuSecuritySetInputLabel(vm, input) < 0)
goto cleanup;
teardownlabel = true;
if (VIR_REALLOC_N(vm->def->inputs, vm->def->ninputs + 1) < 0)
goto cleanup;
qemuDomainObjEnterMonitor(driver, vm);
if (qemuMonitorAddDevice(priv->mon, devstr) < 0)
goto exit_monitor;
if (qemuDomainObjExitMonitor(driver, vm) < 0) {
releaseaddr = false;
goto cleanup;
}
VIR_APPEND_ELEMENT_COPY_INPLACE(vm->def->inputs, vm->def->ninputs, input);
ret = 0;
audit:
virDomainAuditInput(vm, input, "attach", ret == 0);
cleanup:
if (ret < 0) {
virErrorPreserveLast(&originalError);
if (teardownlabel)
qemuSecurityRestoreInputLabel(vm, input);
if (teardowncgroup)
qemuTeardownInputCgroup(vm, input);
if (teardowndevice)
qemuDomainNamespaceTeardownInput(vm, input);
if (releaseaddr)
qemuDomainReleaseDeviceAddress(vm, &input->info, NULL);
virErrorRestore(&originalError);
}
VIR_FREE(devstr);
return ret;
exit_monitor:
if (qemuDomainObjExitMonitor(driver, vm) < 0) {
releaseaddr = false;
goto cleanup;
}
goto audit;
}
int
qemuDomainAttachVsockDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainVsockDefPtr vsock)
{
qemuDomainVsockPrivatePtr vsockPriv = (qemuDomainVsockPrivatePtr)vsock->privateData;
qemuDomainObjPrivatePtr priv = vm->privateData;
virDomainDeviceDef dev = { VIR_DOMAIN_DEVICE_VSOCK,
{ .vsock = vsock } };
virErrorPtr originalError = NULL;
const char *fdprefix = "vsockfd";
bool releaseaddr = false;
char *fdname = NULL;
char *devstr = NULL;
int ret = -1;
if (vm->def->vsock) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
_("the domain already has a vsock device"));
return -1;
}
if (qemuDomainEnsureVirtioAddress(&releaseaddr, vm, &dev, "vsock") < 0)
return -1;
if (qemuAssignDeviceVsockAlias(vsock) < 0)
goto cleanup;
if (qemuProcessOpenVhostVsock(vsock) < 0)
goto cleanup;
if (virAsprintf(&fdname, "%s%u", fdprefix, vsockPriv->vhostfd) < 0)
goto cleanup;
if (!(devstr = qemuBuildVsockDevStr(vm->def, vsock, priv->qemuCaps, fdprefix)))
goto cleanup;
qemuDomainObjEnterMonitor(driver, vm);
if (qemuMonitorAddDeviceWithFd(priv->mon, devstr, vsockPriv->vhostfd, fdname) < 0)
goto exit_monitor;
if (qemuDomainObjExitMonitor(driver, vm) < 0) {
releaseaddr = false;
goto cleanup;
}
VIR_STEAL_PTR(vm->def->vsock, vsock);
ret = 0;
cleanup:
if (ret < 0) {
virErrorPreserveLast(&originalError);
if (releaseaddr)
qemuDomainReleaseDeviceAddress(vm, &vsock->info, NULL);
virErrorRestore(&originalError);
}
VIR_FREE(devstr);
VIR_FREE(fdname);
return ret;
exit_monitor:
if (qemuDomainObjExitMonitor(driver, vm) < 0)
releaseaddr = false;
goto cleanup;
}
static int
qemuDomainChangeNetBridge(virDomainObjPtr vm,
virDomainNetDefPtr olddev,
virDomainNetDefPtr newdev)
{
int ret = -1;
const char *oldbridge = virDomainNetGetActualBridgeName(olddev);
const char *newbridge = virDomainNetGetActualBridgeName(newdev);
if (!oldbridge || !newbridge) {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _("Missing bridge name"));
goto cleanup;
}
VIR_DEBUG("Change bridge for interface %s: %s -> %s",
olddev->ifname, oldbridge, newbridge);
if (virNetDevExists(newbridge) != 1) {
virReportError(VIR_ERR_OPERATION_FAILED,
_("bridge %s doesn't exist"), newbridge);
goto cleanup;
}
if (oldbridge) {
ret = virNetDevBridgeRemovePort(oldbridge, olddev->ifname);
virDomainAuditNet(vm, olddev, NULL, "detach", ret == 0);
if (ret < 0) {
/* warn but continue - possibly the old network
* had been destroyed and reconstructed, leaving the
* tap device orphaned.
*/
VIR_WARN("Unable to detach device %s from bridge %s",
olddev->ifname, oldbridge);
}
}
ret = virNetDevBridgeAddPort(newbridge, olddev->ifname);
virDomainAuditNet(vm, NULL, newdev, "attach", ret == 0);
if (ret < 0) {
ret = virNetDevBridgeAddPort(oldbridge, olddev->ifname);
virDomainAuditNet(vm, NULL, olddev, "attach", ret == 0);
if (ret < 0) {
virReportError(VIR_ERR_OPERATION_FAILED,
_("unable to recover former state by adding port "
"to bridge %s"), oldbridge);
}
goto cleanup;
}
/* caller will replace entire olddev with newdev in domain nets list */
ret = 0;
cleanup:
return ret;
}
static int
qemuDomainChangeNetFilter(virDomainObjPtr vm,
virDomainNetDefPtr olddev,
virDomainNetDefPtr newdev)
{
/* make sure this type of device supports filters. */
switch (virDomainNetGetActualType(newdev)) {
case VIR_DOMAIN_NET_TYPE_ETHERNET:
case VIR_DOMAIN_NET_TYPE_BRIDGE:
case VIR_DOMAIN_NET_TYPE_NETWORK:
break;
case VIR_DOMAIN_NET_TYPE_USER:
case VIR_DOMAIN_NET_TYPE_VHOSTUSER:
case VIR_DOMAIN_NET_TYPE_SERVER:
case VIR_DOMAIN_NET_TYPE_CLIENT:
case VIR_DOMAIN_NET_TYPE_MCAST:
case VIR_DOMAIN_NET_TYPE_INTERNAL:
case VIR_DOMAIN_NET_TYPE_DIRECT:
case VIR_DOMAIN_NET_TYPE_HOSTDEV:
case VIR_DOMAIN_NET_TYPE_UDP:
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
_("filters not supported on interfaces of type %s"),
virDomainNetTypeToString(virDomainNetGetActualType(newdev)));
return -1;
case VIR_DOMAIN_NET_TYPE_LAST:
default:
virReportEnumRangeError(virDomainNetType,
virDomainNetGetActualType(newdev));
return -1;
}
virDomainConfNWFilterTeardown(olddev);
if (newdev->filter &&
virDomainConfNWFilterInstantiate(vm->def->name,
vm->def->uuid, newdev, false) < 0) {
virErrorPtr errobj;
virReportError(VIR_ERR_OPERATION_FAILED,
_("failed to add new filter rules to '%s' "
"- attempting to restore old rules"),
olddev->ifname);
virErrorPreserveLast(&errobj);
ignore_value(virDomainConfNWFilterInstantiate(vm->def->name,
vm->def->uuid, olddev, false));
virErrorRestore(&errobj);
return -1;
}
return 0;
}
int qemuDomainChangeNetLinkState(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainNetDefPtr dev,
int linkstate)
{
int ret = -1;
qemuDomainObjPrivatePtr priv = vm->privateData;
if (!dev->info.alias) {
virReportError(VIR_ERR_OPERATION_FAILED, "%s",
_("can't change link state: device alias not found"));
return -1;
}
VIR_DEBUG("dev: %s, state: %d", dev->info.alias, linkstate);
qemuDomainObjEnterMonitor(driver, vm);
ret = qemuMonitorSetLink(priv->mon, dev->info.alias, linkstate);
if (ret < 0)
goto cleanup;
/* modify the device configuration */
dev->linkstate = linkstate;
cleanup:
if (qemuDomainObjExitMonitor(driver, vm) < 0)
return -1;
return ret;
}
int
qemuDomainChangeNet(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDeviceDefPtr dev)
{
virDomainNetDefPtr newdev = dev->data.net;
virDomainNetDefPtr *devslot = NULL;
virDomainNetDefPtr olddev;
virDomainNetType oldType, newType;
bool needReconnect = false;
bool needBridgeChange = false;
bool needFilterChange = false;
bool needLinkStateChange = false;
bool needReplaceDevDef = false;
bool needBandwidthSet = false;
bool needCoalesceChange = false;
bool needVlanUpdate = false;
int ret = -1;
int changeidx = -1;
if ((changeidx = virDomainNetFindIdx(vm->def, newdev)) < 0)
goto cleanup;
devslot = &vm->def->nets[changeidx];
olddev = *devslot;
oldType = virDomainNetGetActualType(olddev);
if (oldType == VIR_DOMAIN_NET_TYPE_HOSTDEV) {
/* no changes are possible to a type='hostdev' interface */
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("cannot change config of '%s' network type"),
virDomainNetTypeToString(oldType));
goto cleanup;
}
/* Check individual attributes for changes that can't be done to a
* live netdev. These checks *mostly* go in order of the
* declarations in virDomainNetDef in order to assure nothing is
* omitted. (exceptiong where noted in comments - in particular,
* some things require that a new "actual device" be allocated
* from the network driver first, but we delay doing that until
* after we've made as many other checks as possible)
*/
/* type: this can change (with some restrictions), but the actual
* type of the new device connection isn't known until after we
* allocate the "actual" device.
*/
if (virMacAddrCmp(&olddev->mac, &newdev->mac)) {
char oldmac[VIR_MAC_STRING_BUFLEN], newmac[VIR_MAC_STRING_BUFLEN];
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("cannot change network interface mac address "
"from %s to %s"),
virMacAddrFormat(&olddev->mac, oldmac),
virMacAddrFormat(&newdev->mac, newmac));
goto cleanup;
}
if (STRNEQ_NULLABLE(olddev->model, newdev->model)) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("cannot modify network device model from %s to %s"),
olddev->model ? olddev->model : "(default)",
newdev->model ? newdev->model : "(default)");
goto cleanup;
}
if (olddev->model && STREQ(olddev->model, "virtio") &&
(olddev->driver.virtio.name != newdev->driver.virtio.name ||
olddev->driver.virtio.txmode != newdev->driver.virtio.txmode ||
olddev->driver.virtio.ioeventfd != newdev->driver.virtio.ioeventfd ||
olddev->driver.virtio.event_idx != newdev->driver.virtio.event_idx ||
olddev->driver.virtio.queues != newdev->driver.virtio.queues ||
olddev->driver.virtio.rx_queue_size != newdev->driver.virtio.rx_queue_size ||
olddev->driver.virtio.tx_queue_size != newdev->driver.virtio.tx_queue_size ||
olddev->driver.virtio.host.csum != newdev->driver.virtio.host.csum ||
olddev->driver.virtio.host.gso != newdev->driver.virtio.host.gso ||
olddev->driver.virtio.host.tso4 != newdev->driver.virtio.host.tso4 ||
olddev->driver.virtio.host.tso6 != newdev->driver.virtio.host.tso6 ||
olddev->driver.virtio.host.ecn != newdev->driver.virtio.host.ecn ||
olddev->driver.virtio.host.ufo != newdev->driver.virtio.host.ufo ||
olddev->driver.virtio.host.mrg_rxbuf != newdev->driver.virtio.host.mrg_rxbuf ||
olddev->driver.virtio.guest.csum != newdev->driver.virtio.guest.csum ||
olddev->driver.virtio.guest.tso4 != newdev->driver.virtio.guest.tso4 ||
olddev->driver.virtio.guest.tso6 != newdev->driver.virtio.guest.tso6 ||
olddev->driver.virtio.guest.ecn != newdev->driver.virtio.guest.ecn ||
olddev->driver.virtio.guest.ufo != newdev->driver.virtio.guest.ufo)) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
_("cannot modify virtio network device driver attributes"));
goto cleanup;
}
/* data: this union will be examined later, after allocating new actualdev */
/* virtPortProfile: will be examined later, after allocating new actualdev */
if (olddev->tune.sndbuf_specified != newdev->tune.sndbuf_specified ||
olddev->tune.sndbuf != newdev->tune.sndbuf) {
needReconnect = true;
}
if (STRNEQ_NULLABLE(olddev->script, newdev->script)) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
_("cannot modify network device script attribute"));
goto cleanup;
}
/* ifname: check if it's set in newdev. If not, retain the autogenerated one */
if (!newdev->ifname && VIR_STRDUP(newdev->ifname, olddev->ifname) < 0)
goto cleanup;
if (STRNEQ_NULLABLE(olddev->ifname, newdev->ifname)) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
_("cannot modify network device tap name"));
goto cleanup;
}
/* info: if newdev->info is empty, fill it in from olddev,
* otherwise verify that it matches - nothing is allowed to
* change. (There is no helper function to do this, so
* individually check the few feidls of virDomainDeviceInfo that
* are relevant in this case).
*/
if (!virDomainDeviceAddressIsValid(&newdev->info,
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) &&
virDomainDeviceInfoCopy(&newdev->info, &olddev->info) < 0) {
goto cleanup;
}
if (!virPCIDeviceAddressEqual(&olddev->info.addr.pci,
&newdev->info.addr.pci)) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
_("cannot modify network device guest PCI address"));
goto cleanup;
}
/* grab alias from olddev if not set in newdev */
if (!newdev->info.alias &&
VIR_STRDUP(newdev->info.alias, olddev->info.alias) < 0)
goto cleanup;
/* device alias is checked already in virDomainDefCompatibleDevice */
if (olddev->info.rombar != newdev->info.rombar) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
_("cannot modify network device rom bar setting"));
goto cleanup;
}
if (STRNEQ_NULLABLE(olddev->info.romfile, newdev->info.romfile)) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
_("cannot modify network rom file"));
goto cleanup;
}
if (olddev->info.bootIndex != newdev->info.bootIndex) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
_("cannot modify network device boot index setting"));
goto cleanup;
}
if (olddev->info.romenabled != newdev->info.romenabled) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
_("cannot modify network device rom enabled setting"));
goto cleanup;
}
/* (end of device info checks) */
if (STRNEQ_NULLABLE(olddev->filter, newdev->filter) ||
!virNWFilterHashTableEqual(olddev->filterparams, newdev->filterparams)) {
needFilterChange = true;
}
/* bandwidth can be modified, and will be checked later */
/* vlan can be modified, and will be checked later */
/* linkstate can be modified */
if (olddev->mtu != newdev->mtu) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
_("cannot modify MTU"));
goto cleanup;
}
/* allocate new actual device to compare to old - we will need to
* free it if we fail for any reason
*/
if (newdev->type == VIR_DOMAIN_NET_TYPE_NETWORK &&
virDomainNetAllocateActualDevice(vm->def, newdev) < 0) {
goto cleanup;
}
newType = virDomainNetGetActualType(newdev);
if (newType == VIR_DOMAIN_NET_TYPE_HOSTDEV) {
/* can't turn it into a type='hostdev' interface */
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("cannot change network interface type to '%s'"),
virDomainNetTypeToString(newType));
goto cleanup;
}
if (olddev->type == newdev->type && oldType == newType) {
/* if type hasn't changed, check the relevant fields for the type */
switch (newdev->type) {
case VIR_DOMAIN_NET_TYPE_USER:
break;
case VIR_DOMAIN_NET_TYPE_ETHERNET:
break;
case VIR_DOMAIN_NET_TYPE_SERVER:
case VIR_DOMAIN_NET_TYPE_CLIENT:
case VIR_DOMAIN_NET_TYPE_MCAST:
case VIR_DOMAIN_NET_TYPE_UDP:
if (STRNEQ_NULLABLE(olddev->data.socket.address,
newdev->data.socket.address) ||
olddev->data.socket.port != newdev->data.socket.port) {
needReconnect = true;
}
break;
case VIR_DOMAIN_NET_TYPE_NETWORK:
if (STRNEQ(olddev->data.network.name, newdev->data.network.name)) {
if (virDomainNetGetActualVirtPortProfile(newdev))
needReconnect = true;
else
needBridgeChange = true;
}
/* other things handled in common code directly below this switch */
break;
case VIR_DOMAIN_NET_TYPE_BRIDGE:
/* all handled in bridge name checked in common code below */
break;
case VIR_DOMAIN_NET_TYPE_INTERNAL:
if (STRNEQ_NULLABLE(olddev->data.internal.name,
newdev->data.internal.name)) {
needReconnect = true;
}
break;
case VIR_DOMAIN_NET_TYPE_DIRECT:
/* all handled in common code directly below this switch */
break;
case VIR_DOMAIN_NET_TYPE_VHOSTUSER:
case VIR_DOMAIN_NET_TYPE_HOSTDEV:
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("unable to change config on '%s' network type"),
virDomainNetTypeToString(newdev->type));
goto cleanup;
case VIR_DOMAIN_NET_TYPE_LAST:
default:
virReportEnumRangeError(virDomainNetType, newdev->type);
goto cleanup;
}
} else {
/* interface type has changed. There are a few special cases
* where this can only require a minor (or even no) change,
* but in most cases we need to do a full reconnection.
*
* If we switch (in either direction) between type='bridge'
* and type='network' (for a traditional managed virtual
* network that uses a host bridge, i.e. forward
* mode='route|nat'), we just need to change the bridge.
*/
if ((oldType == VIR_DOMAIN_NET_TYPE_NETWORK &&
newType == VIR_DOMAIN_NET_TYPE_BRIDGE) ||
(oldType == VIR_DOMAIN_NET_TYPE_BRIDGE &&
newType == VIR_DOMAIN_NET_TYPE_NETWORK)) {
needBridgeChange = true;
} else if (oldType == VIR_DOMAIN_NET_TYPE_DIRECT &&
newType == VIR_DOMAIN_NET_TYPE_DIRECT) {
/* this is the case of switching from type='direct' to
* type='network' for a network that itself uses direct
* (macvtap) devices. If the physical device and mode are
* the same, this doesn't require any actual setup
* change. If the physical device or mode *does* change,
* that will be caught in the common section below */
} else {
/* for all other combinations, we'll need a full reconnect */
needReconnect = true;
}
}
/* now several things that are in multiple (but not all)
* different types, and can be safely compared even for those
* cases where they don't apply to a particular type.
*/
if (STRNEQ_NULLABLE(virDomainNetGetActualBridgeName(olddev),
virDomainNetGetActualBridgeName(newdev))) {
if (virDomainNetGetActualVirtPortProfile(newdev))
needReconnect = true;
else
needBridgeChange = true;
}
if (STRNEQ_NULLABLE(virDomainNetGetActualDirectDev(olddev),
virDomainNetGetActualDirectDev(newdev)) ||
virDomainNetGetActualDirectMode(olddev) != virDomainNetGetActualDirectMode(newdev) ||
!virNetDevVPortProfileEqual(virDomainNetGetActualVirtPortProfile(olddev),
virDomainNetGetActualVirtPortProfile(newdev))) {
needReconnect = true;
}
if (!virNetDevVlanEqual(virDomainNetGetActualVlan(olddev),
virDomainNetGetActualVlan(newdev))) {
needVlanUpdate = true;
}
if (olddev->linkstate != newdev->linkstate)
needLinkStateChange = true;
if (!virNetDevBandwidthEqual(virDomainNetGetActualBandwidth(olddev),
virDomainNetGetActualBandwidth(newdev)))
needBandwidthSet = true;
if (!!olddev->coalesce != !!newdev->coalesce ||
(olddev->coalesce && newdev->coalesce &&
memcmp(olddev->coalesce, newdev->coalesce,
sizeof(*olddev->coalesce))))
needCoalesceChange = true;
/* FINALLY - actually perform the required actions */
if (needReconnect) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("unable to change config on '%s' network type"),
virDomainNetTypeToString(newdev->type));
goto cleanup;
}
if (needBandwidthSet) {
virNetDevBandwidthPtr newb = virDomainNetGetActualBandwidth(newdev);
if (newb) {
if (virNetDevBandwidthSet(newdev->ifname, newb, false,
!virDomainNetTypeSharesHostView(newdev)) < 0)
goto cleanup;
} else {
/*
* virNetDevBandwidthSet() doesn't clear any existing
* setting unless something new is being set.
*/
virNetDevBandwidthClear(newdev->ifname);
}
needReplaceDevDef = true;
}
if (needBridgeChange) {
if (qemuDomainChangeNetBridge(vm, olddev, newdev) < 0)
goto cleanup;
/* we successfully switched to the new bridge, and we've
* determined that the rest of newdev is equivalent to olddev,
* so move newdev into place */
needReplaceDevDef = true;
}
if (needFilterChange) {
if (qemuDomainChangeNetFilter(vm, olddev, newdev) < 0)
goto cleanup;
/* we successfully switched to the new filter, and we've
* determined that the rest of newdev is equivalent to olddev,
* so move newdev into place */
needReplaceDevDef = true;
}
if (needCoalesceChange) {
if (virNetDevSetCoalesce(newdev->ifname, newdev->coalesce, true) < 0)
goto cleanup;
needReplaceDevDef = true;
}
if (needLinkStateChange &&
qemuDomainChangeNetLinkState(driver, vm, olddev, newdev->linkstate) < 0) {
goto cleanup;
}
if (needVlanUpdate) {
if (virNetDevOpenvswitchUpdateVlan(newdev->ifname, &newdev->vlan) < 0)
goto cleanup;
needReplaceDevDef = true;
}
if (needReplaceDevDef) {
/* the changes above warrant replacing olddev with newdev in
* the domain's nets list.
*/
/* this function doesn't work with HOSTDEV networks yet, thus
* no need to change the pointer in the hostdev structure */
virDomainNetReleaseActualDevice(vm->def, olddev);
virDomainNetDefFree(olddev);
/* move newdev into the nets list, and NULL it out from the
* virDomainDeviceDef that we were given so that the caller
* won't delete it on return.
*/
*devslot = newdev;
newdev = dev->data.net = NULL;
dev->type = VIR_DOMAIN_DEVICE_NONE;
}
ret = 0;
cleanup:
/* When we get here, we will be in one of these two states:
*
* 1) newdev has been moved into the domain's list of nets and
* newdev set to NULL, and dev->data.net will be NULL (and
* dev->type is NONE). olddev will have been completely
* released and freed. (aka success) In this case no extra
* cleanup is needed.
*
* 2) newdev has *not* been moved into the domain's list of nets,
* and dev->data.net == newdev (and dev->type == NET). In this *
* case, we need to at least release the "actual device" from *
* newdev (the caller will free dev->data.net a.k.a. newdev, and
* the original olddev is still in used)
*
* Note that case (2) isn't necessarily a failure. It may just be
* that the changes were minor enough that we didn't need to
* replace the entire device object.
*/
if (newdev)
virDomainNetReleaseActualDevice(vm->def, newdev);
return ret;
}
static virDomainGraphicsDefPtr
qemuDomainFindGraphics(virDomainObjPtr vm,
virDomainGraphicsDefPtr dev)
{
size_t i;
for (i = 0; i < vm->def->ngraphics; i++) {
if (vm->def->graphics[i]->type == dev->type)
return vm->def->graphics[i];
}
return NULL;
}
int
qemuDomainFindGraphicsIndex(virDomainDefPtr def,
virDomainGraphicsDefPtr dev)
{
size_t i;
for (i = 0; i < def->ngraphics; i++) {
if (def->graphics[i]->type == dev->type)
return i;
}
return -1;
}
int
qemuDomainChangeGraphics(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainGraphicsDefPtr dev)
{
virDomainGraphicsDefPtr olddev = qemuDomainFindGraphics(vm, dev);
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
const char *type = virDomainGraphicsTypeToString(dev->type);
size_t i;
int ret = -1;
if (!olddev) {
virReportError(VIR_ERR_DEVICE_MISSING,
_("cannot find existing graphics device to modify of "
"type '%s'"), type);
goto cleanup;
}
if (dev->nListens != olddev->nListens) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("cannot change the number of listen addresses "
"on '%s' graphics"), type);
goto cleanup;
}
for (i = 0; i < dev->nListens; i++) {
virDomainGraphicsListenDefPtr newlisten = &dev->listens[i];
virDomainGraphicsListenDefPtr oldlisten = &olddev->listens[i];
if (newlisten->type != oldlisten->type) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("cannot change the type of listen address "
"on '%s' graphics"), type);
goto cleanup;
}
switch (newlisten->type) {
case VIR_DOMAIN_GRAPHICS_LISTEN_TYPE_ADDRESS:
if (STRNEQ_NULLABLE(newlisten->address, oldlisten->address)) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("cannot change listen address setting "
"on '%s' graphics"), type);
goto cleanup;
}
break;
case VIR_DOMAIN_GRAPHICS_LISTEN_TYPE_NETWORK:
if (STRNEQ_NULLABLE(newlisten->network, oldlisten->network)) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("cannot change listen address setting "
"on '%s' graphics"), type);
goto cleanup;
}
break;
case VIR_DOMAIN_GRAPHICS_LISTEN_TYPE_SOCKET:
if (STRNEQ_NULLABLE(newlisten->socket, oldlisten->socket)) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("cannot change listen socket setting "
"on '%s' graphics"), type);
goto cleanup;
}
break;
case VIR_DOMAIN_GRAPHICS_LISTEN_TYPE_NONE:
case VIR_DOMAIN_GRAPHICS_LISTEN_TYPE_LAST:
/* nada */
break;
}
}
switch (dev->type) {
case VIR_DOMAIN_GRAPHICS_TYPE_VNC:
if ((olddev->data.vnc.autoport != dev->data.vnc.autoport) ||
(!dev->data.vnc.autoport &&
(olddev->data.vnc.port != dev->data.vnc.port))) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
_("cannot change port settings on vnc graphics"));
goto cleanup;
}
if (STRNEQ_NULLABLE(olddev->data.vnc.keymap, dev->data.vnc.keymap)) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
_("cannot change keymap setting on vnc graphics"));
goto cleanup;
}
/* If a password lifetime was, or is set, or action if connected has
* changed, then we must always run, even if new password matches
* old password */
if (olddev->data.vnc.auth.expires ||
dev->data.vnc.auth.expires ||
olddev->data.vnc.auth.connected != dev->data.vnc.auth.connected ||
STRNEQ_NULLABLE(olddev->data.vnc.auth.passwd,
dev->data.vnc.auth.passwd)) {
VIR_DEBUG("Updating password on VNC server %p %p",
dev->data.vnc.auth.passwd, cfg->vncPassword);
ret = qemuDomainChangeGraphicsPasswords(driver, vm,
VIR_DOMAIN_GRAPHICS_TYPE_VNC,
&dev->data.vnc.auth,
cfg->vncPassword,
QEMU_ASYNC_JOB_NONE);
if (ret < 0)
goto cleanup;
/* Steal the new dev's char * reference */
VIR_FREE(olddev->data.vnc.auth.passwd);
olddev->data.vnc.auth.passwd = dev->data.vnc.auth.passwd;
dev->data.vnc.auth.passwd = NULL;
olddev->data.vnc.auth.validTo = dev->data.vnc.auth.validTo;
olddev->data.vnc.auth.expires = dev->data.vnc.auth.expires;
olddev->data.vnc.auth.connected = dev->data.vnc.auth.connected;
} else {
ret = 0;
}
break;
case VIR_DOMAIN_GRAPHICS_TYPE_SPICE:
if ((olddev->data.spice.autoport != dev->data.spice.autoport) ||
(!dev->data.spice.autoport &&
(olddev->data.spice.port != dev->data.spice.port)) ||
(!dev->data.spice.autoport &&
(olddev->data.spice.tlsPort != dev->data.spice.tlsPort))) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
_("cannot change port settings on spice graphics"));
goto cleanup;
}
if (STRNEQ_NULLABLE(olddev->data.spice.keymap,
dev->data.spice.keymap)) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
_("cannot change keymap setting on spice graphics"));
goto cleanup;
}
/* We must reset the password if it has changed but also if:
* - password lifetime is or was set
* - the requested action has changed
* - the action is "disconnect"
*/
if (olddev->data.spice.auth.expires ||
dev->data.spice.auth.expires ||
olddev->data.spice.auth.connected != dev->data.spice.auth.connected ||
dev->data.spice.auth.connected ==
VIR_DOMAIN_GRAPHICS_AUTH_CONNECTED_DISCONNECT ||
STRNEQ_NULLABLE(olddev->data.spice.auth.passwd,
dev->data.spice.auth.passwd)) {
VIR_DEBUG("Updating password on SPICE server %p %p",
dev->data.spice.auth.passwd, cfg->spicePassword);
ret = qemuDomainChangeGraphicsPasswords(driver, vm,
VIR_DOMAIN_GRAPHICS_TYPE_SPICE,
&dev->data.spice.auth,
cfg->spicePassword,
QEMU_ASYNC_JOB_NONE);
if (ret < 0)
goto cleanup;
/* Steal the new dev's char * reference */
VIR_FREE(olddev->data.spice.auth.passwd);
olddev->data.spice.auth.passwd = dev->data.spice.auth.passwd;
dev->data.spice.auth.passwd = NULL;
olddev->data.spice.auth.validTo = dev->data.spice.auth.validTo;
olddev->data.spice.auth.expires = dev->data.spice.auth.expires;
olddev->data.spice.auth.connected = dev->data.spice.auth.connected;
} else {
VIR_DEBUG("Not updating since password didn't change");
ret = 0;
}
break;
case VIR_DOMAIN_GRAPHICS_TYPE_SDL:
case VIR_DOMAIN_GRAPHICS_TYPE_RDP:
case VIR_DOMAIN_GRAPHICS_TYPE_DESKTOP:
case VIR_DOMAIN_GRAPHICS_TYPE_EGL_HEADLESS:
virReportError(VIR_ERR_INTERNAL_ERROR,
_("unable to change config on '%s' graphics type"), type);
break;
case VIR_DOMAIN_GRAPHICS_TYPE_LAST:
default:
virReportEnumRangeError(virDomainGraphicsType, dev->type);
break;
}
cleanup:
virObjectUnref(cfg);
return ret;
}
static int qemuComparePCIDevice(virDomainDefPtr def ATTRIBUTE_UNUSED,
virDomainDeviceDefPtr device ATTRIBUTE_UNUSED,
virDomainDeviceInfoPtr info1,
void *opaque)
{
virDomainDeviceInfoPtr info2 = opaque;
if (info1->type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI ||
info2->type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI)
return 0;
if (info1->addr.pci.domain == info2->addr.pci.domain &&
info1->addr.pci.bus == info2->addr.pci.bus &&
info1->addr.pci.slot == info2->addr.pci.slot &&
info1->addr.pci.function != info2->addr.pci.function)
return -1;
return 0;
}
static bool qemuIsMultiFunctionDevice(virDomainDefPtr def,
virDomainDeviceInfoPtr dev)
{
if (dev->type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI)
return false;
if (virDomainDeviceInfoIterate(def, qemuComparePCIDevice, dev) < 0)
return true;
return false;
}
static int
qemuDomainRemoveDiskDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDiskDefPtr disk)
{
qemuHotplugDiskSourceDataPtr diskbackend = NULL;
virDomainDeviceDef dev;
virObjectEventPtr event;
size_t i;
qemuDomainObjPrivatePtr priv = vm->privateData;
int ret = -1;
VIR_DEBUG("Removing disk %s from domain %p %s",
disk->info.alias, vm, vm->def->name);
if (!(diskbackend = qemuHotplugDiskSourceRemovePrepare(disk, priv->qemuCaps)))
return -1;
for (i = 0; i < vm->def->ndisks; i++) {
if (vm->def->disks[i] == disk) {
virDomainDiskRemove(vm->def, i);
break;
}
}
qemuDomainObjEnterMonitor(driver, vm);
qemuHotplugDiskSourceRemove(priv->mon, diskbackend);
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
virDomainAuditDisk(vm, disk->src, NULL, "detach", true);
event = virDomainEventDeviceRemovedNewFromObj(vm, disk->info.alias);
virObjectEventStateQueue(driver->domainEventState, event);
qemuDomainReleaseDeviceAddress(vm, &disk->info, virDomainDiskGetSource(disk));
/* tear down disk security access */
qemuHotplugPrepareDiskAccess(driver, vm, disk, NULL, true);
dev.type = VIR_DOMAIN_DEVICE_DISK;
dev.data.disk = disk;
ignore_value(qemuRemoveSharedDevice(driver, &dev, vm->def->name));
virDomainUSBAddressRelease(priv->usbaddrs, &disk->info);
if (qemuHotplugRemoveManagedPR(driver, vm, QEMU_ASYNC_JOB_NONE) < 0)
goto cleanup;
ret = 0;
cleanup:
qemuHotplugDiskSourceDataFree(diskbackend);
virDomainDiskDefFree(disk);
return ret;
}
static int
qemuDomainRemoveControllerDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainControllerDefPtr controller)
{
virObjectEventPtr event;
size_t i;
VIR_DEBUG("Removing controller %s from domain %p %s",
controller->info.alias, vm, vm->def->name);
event = virDomainEventDeviceRemovedNewFromObj(vm, controller->info.alias);
virObjectEventStateQueue(driver->domainEventState, event);
for (i = 0; i < vm->def->ncontrollers; i++) {
if (vm->def->controllers[i] == controller) {
virDomainControllerRemove(vm->def, i);
break;
}
}
qemuDomainReleaseDeviceAddress(vm, &controller->info, NULL);
virDomainControllerDefFree(controller);
return 0;
}
static int
qemuDomainRemoveMemoryDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainMemoryDefPtr mem)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
unsigned long long oldmem = virDomainDefGetMemoryTotal(vm->def);
unsigned long long newmem = oldmem - mem->size;
virObjectEventPtr event;
char *backendAlias = NULL;
int rc;
int idx;
VIR_DEBUG("Removing memory device %s from domain %p %s",
mem->info.alias, vm, vm->def->name);
if (virAsprintf(&backendAlias, "mem%s", mem->info.alias) < 0)
return -1;
qemuDomainObjEnterMonitor(driver, vm);
rc = qemuMonitorDelObject(priv->mon, backendAlias);
if (qemuDomainObjExitMonitor(driver, vm) < 0)
rc = -1;
VIR_FREE(backendAlias);
virDomainAuditMemory(vm, oldmem, newmem, "update", rc == 0);
if (rc < 0)
return -1;
event = virDomainEventDeviceRemovedNewFromObj(vm, mem->info.alias);
virObjectEventStateQueue(driver->domainEventState, event);
if ((idx = virDomainMemoryFindByDef(vm->def, mem)) >= 0)
virDomainMemoryRemove(vm->def, idx);
if (qemuSecurityRestoreMemoryLabel(driver, vm, mem) < 0)
VIR_WARN("Unable to restore security label on memdev");
if (qemuTeardownMemoryDevicesCgroup(vm, mem) < 0)
VIR_WARN("Unable to remove memory device cgroup ACL");
if (qemuDomainNamespaceTeardownMemory(vm, mem) < 0)
VIR_WARN("Unable to remove memory device from /dev");
if (qemuProcessDestroyMemoryBackingPath(driver, vm, mem) < 0)
VIR_WARN("Unable to destroy memory backing path");
virDomainMemoryDefFree(mem);
/* fix the balloon size */
ignore_value(qemuProcessRefreshBalloonState(driver, vm, QEMU_ASYNC_JOB_NONE));
/* decrease the mlock limit after memory unplug if necessary */
ignore_value(qemuDomainAdjustMaxMemLock(vm));
return 0;
}
static void
qemuDomainRemovePCIHostDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainHostdevDefPtr hostdev)
{
qemuHostdevReAttachPCIDevices(driver, vm->def->name, &hostdev, 1);
qemuDomainReleaseDeviceAddress(vm, hostdev->info, NULL);
}
static void
qemuDomainRemoveUSBHostDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainHostdevDefPtr hostdev)
{
qemuHostdevReAttachUSBDevices(driver, vm->def->name, &hostdev, 1);
qemuDomainReleaseDeviceAddress(vm, hostdev->info, NULL);
}
static void
qemuDomainRemoveSCSIHostDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainHostdevDefPtr hostdev)
{
qemuHostdevReAttachSCSIDevices(driver, vm->def->name, &hostdev, 1);
}
static void
qemuDomainRemoveSCSIVHostDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainHostdevDefPtr hostdev)
{
qemuHostdevReAttachSCSIVHostDevices(driver, vm->def->name, &hostdev, 1);
}
static void
qemuDomainRemoveMediatedDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainHostdevDefPtr hostdev)
{
qemuHostdevReAttachMediatedDevices(driver, vm->def->name, &hostdev, 1);
qemuDomainReleaseDeviceAddress(vm, hostdev->info, NULL);
}
static int
qemuDomainRemoveHostDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainHostdevDefPtr hostdev)
{
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
virDomainNetDefPtr net = NULL;
virObjectEventPtr event;
size_t i;
int ret = -1;
qemuDomainObjPrivatePtr priv = vm->privateData;
char *drivealias = NULL;
char *objAlias = NULL;
bool is_vfio = false;
VIR_DEBUG("Removing host device %s from domain %p %s",
hostdev->info->alias, vm, vm->def->name);
if (hostdev->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) {
int backend = hostdev->source.subsys.u.pci.backend;
is_vfio = backend == VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO;
}
if (hostdev->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI) {
virDomainHostdevSubsysSCSIPtr scsisrc = &hostdev->source.subsys.u.scsi;
virDomainHostdevSubsysSCSIiSCSIPtr iscsisrc = &scsisrc->u.iscsi;
if (!(drivealias = qemuAliasFromHostdev(hostdev)))
goto cleanup;
/* Look for the markers that the iSCSI hostdev was added with a
* secret object to manage the username/password. If present, let's
* attempt to remove the object as well. */
if (scsisrc->protocol == VIR_DOMAIN_HOSTDEV_SCSI_PROTOCOL_TYPE_ISCSI &&
virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_ISCSI_PASSWORD_SECRET) &&
qemuDomainStorageSourceHasAuth(iscsisrc->src)) {
if (!(objAlias = qemuDomainGetSecretAESAlias(hostdev->info->alias, false)))
goto cleanup;
}
qemuDomainObjEnterMonitor(driver, vm);
qemuMonitorDriveDel(priv->mon, drivealias);
/* If it fails, then so be it - it was a best shot */
if (objAlias)
ignore_value(qemuMonitorDelObject(priv->mon, objAlias));
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
}
event = virDomainEventDeviceRemovedNewFromObj(vm, hostdev->info->alias);
virObjectEventStateQueue(driver->domainEventState, event);
if (hostdev->parent.type == VIR_DOMAIN_DEVICE_NET) {
net = hostdev->parent.data.net;
for (i = 0; i < vm->def->nnets; i++) {
if (vm->def->nets[i] == net) {
virDomainNetRemove(vm->def, i);
break;
}
}
}
for (i = 0; i < vm->def->nhostdevs; i++) {
if (vm->def->hostdevs[i] == hostdev) {
virDomainHostdevRemove(vm->def, i);
break;
}
}
virDomainAuditHostdev(vm, hostdev, "detach", true);
if (!is_vfio &&
qemuSecurityRestoreHostdevLabel(driver, vm, hostdev) < 0)
VIR_WARN("Failed to restore host device labelling");
if (qemuTeardownHostdevCgroup(vm, hostdev) < 0)
VIR_WARN("Failed to remove host device cgroup ACL");
if (qemuDomainNamespaceTeardownHostdev(vm, hostdev) < 0)
VIR_WARN("Unable to remove host device from /dev");
switch ((virDomainHostdevSubsysType)hostdev->source.subsys.type) {
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI:
qemuDomainRemovePCIHostDevice(driver, vm, hostdev);
/* QEMU might no longer need to lock as much memory, eg. we just
* detached the last VFIO device, so adjust the limit here */
if (qemuDomainAdjustMaxMemLock(vm) < 0)
VIR_WARN("Failed to adjust locked memory limit");
break;
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB:
qemuDomainRemoveUSBHostDevice(driver, vm, hostdev);
break;
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI:
qemuDomainRemoveSCSIHostDevice(driver, vm, hostdev);
break;
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI_HOST:
qemuDomainRemoveSCSIVHostDevice(driver, vm, hostdev);
break;
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_MDEV:
qemuDomainRemoveMediatedDevice(driver, vm, hostdev);
break;
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_LAST:
break;
}
virDomainHostdevDefFree(hostdev);
if (net) {
virDomainNetReleaseActualDevice(vm->def, net);
virDomainNetDefFree(net);
}
ret = 0;
cleanup:
VIR_FREE(drivealias);
VIR_FREE(objAlias);
virObjectUnref(cfg);
return ret;
}
static int
qemuDomainRemoveNetDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainNetDefPtr net)
{
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
qemuDomainObjPrivatePtr priv = vm->privateData;
virObjectEventPtr event;
char *hostnet_name = NULL;
char *charDevAlias = NULL;
size_t i;
int ret = -1;
int actualType = virDomainNetGetActualType(net);
if (actualType == VIR_DOMAIN_NET_TYPE_HOSTDEV) {
/* this function handles all hostdev and netdev cleanup */
ret = qemuDomainRemoveHostDevice(driver, vm,
virDomainNetGetActualHostdev(net));
goto cleanup;
}
VIR_DEBUG("Removing network interface %s from domain %p %s",
net->info.alias, vm, vm->def->name);
if (virAsprintf(&hostnet_name, "host%s", net->info.alias) < 0 ||
!(charDevAlias = qemuAliasChardevFromDevAlias(net->info.alias)))
goto cleanup;
qemuDomainObjEnterMonitor(driver, vm);
if (qemuMonitorRemoveNetdev(priv->mon, hostnet_name) < 0) {
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
virDomainAuditNet(vm, net, NULL, "detach", false);
goto cleanup;
}
if (actualType == VIR_DOMAIN_NET_TYPE_VHOSTUSER) {
/* vhostuser has a chardev too */
if (qemuMonitorDetachCharDev(priv->mon, charDevAlias) < 0) {
/* well, this is a messy situation. Guest visible PCI device has
* been removed, netdev too but chardev not. The best seems to be
* to just ignore the error and carry on.
*/
}
}
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
virDomainAuditNet(vm, net, NULL, "detach", true);
event = virDomainEventDeviceRemovedNewFromObj(vm, net->info.alias);
virObjectEventStateQueue(driver->domainEventState, event);
for (i = 0; i < vm->def->nnets; i++) {
if (vm->def->nets[i] == net) {
virDomainNetRemove(vm->def, i);
break;
}
}
qemuDomainReleaseDeviceAddress(vm, &net->info, NULL);
virDomainConfNWFilterTeardown(net);
if (cfg->macFilter && (net->ifname != NULL)) {
ignore_value(ebtablesRemoveForwardAllowIn(driver->ebtables,
net->ifname,
&net->mac));
}
if (actualType == VIR_DOMAIN_NET_TYPE_DIRECT) {
ignore_value(virNetDevMacVLanDeleteWithVPortProfile(
net->ifname, &net->mac,
virDomainNetGetActualDirectDev(net),
virDomainNetGetActualDirectMode(net),
virDomainNetGetActualVirtPortProfile(net),
cfg->stateDir));
}
qemuDomainNetDeviceVportRemove(net);
virDomainNetReleaseActualDevice(vm->def, net);
virDomainNetDefFree(net);
ret = 0;
cleanup:
virObjectUnref(cfg);
VIR_FREE(charDevAlias);
VIR_FREE(hostnet_name);
return ret;
}
static int
qemuDomainRemoveChrDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainChrDefPtr chr)
{
virObjectEventPtr event;
char *charAlias = NULL;
qemuDomainObjPrivatePtr priv = vm->privateData;
int ret = -1;
int rc;
VIR_DEBUG("Removing character device %s from domain %p %s",
chr->info.alias, vm, vm->def->name);
if (!(charAlias = qemuAliasChardevFromDevAlias(chr->info.alias)))
goto cleanup;
qemuDomainObjEnterMonitor(driver, vm);
rc = qemuMonitorDetachCharDev(priv->mon, charAlias);
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
if (rc == 0 &&
qemuDomainDelChardevTLSObjects(driver, vm, chr->source, charAlias) < 0)
goto cleanup;
virDomainAuditChardev(vm, chr, NULL, "detach", rc == 0);
if (rc < 0)
goto cleanup;
if (qemuTeardownChardevCgroup(vm, chr) < 0)
VIR_WARN("Failed to remove chr device cgroup ACL");
if (qemuSecurityRestoreChardevLabel(driver, vm, chr) < 0)
VIR_WARN("Unable to restore security label on char device");
if (qemuDomainNamespaceTeardownChardev(vm, chr) < 0)
VIR_WARN("Unable to remove chr device from /dev");
event = virDomainEventDeviceRemovedNewFromObj(vm, chr->info.alias);
virObjectEventStateQueue(driver->domainEventState, event);
qemuDomainReleaseDeviceAddress(vm, &chr->info, NULL);
qemuDomainChrRemove(vm->def, chr);
virDomainChrDefFree(chr);
ret = 0;
cleanup:
VIR_FREE(charAlias);
return ret;
}
static int
qemuDomainRemoveRNGDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainRNGDefPtr rng)
{
virObjectEventPtr event;
char *charAlias = NULL;
char *objAlias = NULL;
qemuDomainObjPrivatePtr priv = vm->privateData;
ssize_t idx;
int ret = -1;
int rc;
VIR_DEBUG("Removing RNG device %s from domain %p %s",
rng->info.alias, vm, vm->def->name);
if (virAsprintf(&objAlias, "obj%s", rng->info.alias) < 0)
goto cleanup;
if (!(charAlias = qemuAliasChardevFromDevAlias(rng->info.alias)))
goto cleanup;
qemuDomainObjEnterMonitor(driver, vm);
rc = qemuMonitorDelObject(priv->mon, objAlias);
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
if (rng->backend == VIR_DOMAIN_RNG_BACKEND_EGD &&
rc == 0 &&
qemuDomainDelChardevTLSObjects(driver, vm, rng->source.chardev,
charAlias) < 0)
goto cleanup;
virDomainAuditRNG(vm, rng, NULL, "detach", rc == 0);
if (rc < 0)
goto cleanup;
if (qemuTeardownRNGCgroup(vm, rng) < 0)
VIR_WARN("Failed to remove RNG device cgroup ACL");
if (qemuDomainNamespaceTeardownRNG(vm, rng) < 0)
VIR_WARN("Unable to remove RNG device from /dev");
event = virDomainEventDeviceRemovedNewFromObj(vm, rng->info.alias);
virObjectEventStateQueue(driver->domainEventState, event);
if ((idx = virDomainRNGFind(vm->def, rng)) >= 0)
virDomainRNGRemove(vm->def, idx);
qemuDomainReleaseDeviceAddress(vm, &rng->info, NULL);
virDomainRNGDefFree(rng);
ret = 0;
cleanup:
VIR_FREE(charAlias);
VIR_FREE(objAlias);
return ret;
}
static int
qemuDomainRemoveShmemDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainShmemDefPtr shmem)
{
int rc;
int ret = -1;
ssize_t idx = -1;
char *charAlias = NULL;
char *memAlias = NULL;
qemuDomainObjPrivatePtr priv = vm->privateData;
virObjectEventPtr event = NULL;
VIR_DEBUG("Removing shmem device %s from domain %p %s",
shmem->info.alias, vm, vm->def->name);
if (shmem->server.enabled) {
if (virAsprintf(&charAlias, "char%s", shmem->info.alias) < 0)
return -1;
} else {
if (virAsprintf(&memAlias, "shmmem-%s", shmem->info.alias) < 0)
return -1;
}
qemuDomainObjEnterMonitor(driver, vm);
if (shmem->server.enabled)
rc = qemuMonitorDetachCharDev(priv->mon, charAlias);
else
rc = qemuMonitorDelObject(priv->mon, memAlias);
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
virDomainAuditShmem(vm, shmem, "detach", rc == 0);
if (rc < 0)
goto cleanup;
event = virDomainEventDeviceRemovedNewFromObj(vm, shmem->info.alias);
virObjectEventStateQueue(driver->domainEventState, event);
if ((idx = virDomainShmemDefFind(vm->def, shmem)) >= 0)
virDomainShmemDefRemove(vm->def, idx);
qemuDomainReleaseDeviceAddress(vm, &shmem->info, NULL);
virDomainShmemDefFree(shmem);
ret = 0;
cleanup:
VIR_FREE(charAlias);
VIR_FREE(memAlias);
return ret;
}
static int
qemuDomainRemoveWatchdog(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainWatchdogDefPtr watchdog)
{
virObjectEventPtr event = NULL;
VIR_DEBUG("Removing watchdog %s from domain %p %s",
watchdog->info.alias, vm, vm->def->name);
event = virDomainEventDeviceRemovedNewFromObj(vm, watchdog->info.alias);
virObjectEventStateQueue(driver->domainEventState, event);
qemuDomainReleaseDeviceAddress(vm, &watchdog->info, NULL);
virDomainWatchdogDefFree(vm->def->watchdog);
vm->def->watchdog = NULL;
return 0;
}
static int
qemuDomainRemoveInputDevice(virDomainObjPtr vm,
virDomainInputDefPtr dev)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
virQEMUDriverPtr driver = priv->driver;
virObjectEventPtr event = NULL;
size_t i;
VIR_DEBUG("Removing input device %s from domain %p %s",
dev->info.alias, vm, vm->def->name);
event = virDomainEventDeviceRemovedNewFromObj(vm, dev->info.alias);
virObjectEventStateQueue(driver->domainEventState, event);
for (i = 0; i < vm->def->ninputs; i++) {
if (vm->def->inputs[i] == dev)
break;
}
qemuDomainReleaseDeviceAddress(vm, &dev->info, NULL);
if (qemuSecurityRestoreInputLabel(vm, dev) < 0)
VIR_WARN("Unable to restore security label on input device");
if (qemuTeardownInputCgroup(vm, dev) < 0)
VIR_WARN("Unable to remove input device cgroup ACL");
if (qemuDomainNamespaceTeardownInput(vm, dev) < 0)
VIR_WARN("Unable to remove input device from /dev");
virDomainInputDefFree(vm->def->inputs[i]);
VIR_DELETE_ELEMENT(vm->def->inputs, i, vm->def->ninputs);
return 0;
}
static int
qemuDomainRemoveVsockDevice(virDomainObjPtr vm,
virDomainVsockDefPtr dev)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
virQEMUDriverPtr driver = priv->driver;
virObjectEventPtr event = NULL;
VIR_DEBUG("Removing vsock device %s from domain %p %s",
dev->info.alias, vm, vm->def->name);
event = virDomainEventDeviceRemovedNewFromObj(vm, dev->info.alias);
virObjectEventStateQueue(driver->domainEventState, event);
qemuDomainReleaseDeviceAddress(vm, &dev->info, NULL);
virDomainVsockDefFree(vm->def->vsock);
vm->def->vsock = NULL;
return 0;
}
static int
qemuDomainRemoveRedirdevDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainRedirdevDefPtr dev)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
virObjectEventPtr event;
char *charAlias = NULL;
ssize_t idx;
int ret = -1;
VIR_DEBUG("Removing redirdev device %s from domain %p %s",
dev->info.alias, vm, vm->def->name);
if (!(charAlias = qemuAliasChardevFromDevAlias(dev->info.alias)))
goto cleanup;
qemuDomainObjEnterMonitor(driver, vm);
/* DeviceDel from Detach may remove chardev,
* so we cannot rely on return status to delete TLS chardevs.
*/
ignore_value(qemuMonitorDetachCharDev(priv->mon, charAlias));
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
if (qemuDomainDelChardevTLSObjects(driver, vm, dev->source, charAlias) < 0)
goto cleanup;
virDomainAuditRedirdev(vm, dev, "detach", true);
event = virDomainEventDeviceRemovedNewFromObj(vm, dev->info.alias);
virObjectEventStateQueue(driver->domainEventState, event);
if ((idx = virDomainRedirdevDefFind(vm->def, dev)) >= 0)
virDomainRedirdevDefRemove(vm->def, idx);
qemuDomainReleaseDeviceAddress(vm, &dev->info, NULL);
virDomainRedirdevDefFree(dev);
ret = 0;
cleanup:
VIR_FREE(charAlias);
return ret;
}
int
qemuDomainRemoveDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDeviceDefPtr dev)
{
int ret = -1;
switch ((virDomainDeviceType)dev->type) {
case VIR_DOMAIN_DEVICE_DISK:
ret = qemuDomainRemoveDiskDevice(driver, vm, dev->data.disk);
break;
case VIR_DOMAIN_DEVICE_CONTROLLER:
ret = qemuDomainRemoveControllerDevice(driver, vm, dev->data.controller);
break;
case VIR_DOMAIN_DEVICE_NET:
ret = qemuDomainRemoveNetDevice(driver, vm, dev->data.net);
break;
case VIR_DOMAIN_DEVICE_HOSTDEV:
ret = qemuDomainRemoveHostDevice(driver, vm, dev->data.hostdev);
break;
case VIR_DOMAIN_DEVICE_CHR:
ret = qemuDomainRemoveChrDevice(driver, vm, dev->data.chr);
break;
case VIR_DOMAIN_DEVICE_RNG:
ret = qemuDomainRemoveRNGDevice(driver, vm, dev->data.rng);
break;
case VIR_DOMAIN_DEVICE_MEMORY:
ret = qemuDomainRemoveMemoryDevice(driver, vm, dev->data.memory);
break;
case VIR_DOMAIN_DEVICE_SHMEM:
ret = qemuDomainRemoveShmemDevice(driver, vm, dev->data.shmem);
break;
case VIR_DOMAIN_DEVICE_INPUT:
ret = qemuDomainRemoveInputDevice(vm, dev->data.input);
break;
case VIR_DOMAIN_DEVICE_REDIRDEV:
ret = qemuDomainRemoveRedirdevDevice(driver, vm, dev->data.redirdev);
break;
case VIR_DOMAIN_DEVICE_WATCHDOG:
ret = qemuDomainRemoveWatchdog(driver, vm, dev->data.watchdog);
break;
case VIR_DOMAIN_DEVICE_VSOCK:
ret = qemuDomainRemoveVsockDevice(vm, dev->data.vsock);
break;
case VIR_DOMAIN_DEVICE_NONE:
case VIR_DOMAIN_DEVICE_LEASE:
case VIR_DOMAIN_DEVICE_FS:
case VIR_DOMAIN_DEVICE_SOUND:
case VIR_DOMAIN_DEVICE_VIDEO:
case VIR_DOMAIN_DEVICE_GRAPHICS:
case VIR_DOMAIN_DEVICE_HUB:
case VIR_DOMAIN_DEVICE_SMARTCARD:
case VIR_DOMAIN_DEVICE_MEMBALLOON:
case VIR_DOMAIN_DEVICE_NVRAM:
case VIR_DOMAIN_DEVICE_TPM:
case VIR_DOMAIN_DEVICE_PANIC:
case VIR_DOMAIN_DEVICE_IOMMU:
case VIR_DOMAIN_DEVICE_LAST:
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("don't know how to remove a %s device"),
virDomainDeviceTypeToString(dev->type));
break;
}
return ret;
}
static void
qemuDomainMarkDeviceAliasForRemoval(virDomainObjPtr vm,
const char *alias)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
memset(&priv->unplug, 0, sizeof(priv->unplug));
if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE_DEL_EVENT))
return;
priv->unplug.alias = alias;
}
static void
qemuDomainMarkDeviceForRemoval(virDomainObjPtr vm,
virDomainDeviceInfoPtr info)
{
qemuDomainMarkDeviceAliasForRemoval(vm, info->alias);
}
static void
qemuDomainResetDeviceRemoval(virDomainObjPtr vm)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
priv->unplug.alias = NULL;
}
/* Returns:
* -1 Unplug of the device failed
*
* 0 DEVICE_DELETED event is supported and removal of the device did not
* finish in qemuDomainRemoveDeviceWaitTime
*
* 1 when the caller is responsible for finishing the device removal:
* - DEVICE_DELETED event is unsupported
* - DEVICE_DELETED event arrived before the timeout time
* - we failed to reliably wait for the event and thus use fallback behavior
*/
static int
qemuDomainWaitForDeviceRemoval(virDomainObjPtr vm)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
unsigned long long until;
int rc;
if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE_DEL_EVENT))
return 1;
if (virTimeMillisNow(&until) < 0)
return 1;
until += qemuDomainRemoveDeviceWaitTime;
while (priv->unplug.alias) {
if ((rc = virDomainObjWaitUntil(vm, until)) == 1)
return 0;
if (rc < 0) {
VIR_WARN("Failed to wait on unplug condition for domain '%s' "
"device '%s'", vm->def->name, priv->unplug.alias);
return 1;
}
}
if (priv->unplug.status == QEMU_DOMAIN_UNPLUGGING_DEVICE_STATUS_GUEST_REJECTED) {
virReportError(VIR_ERR_OPERATION_FAILED, "%s",
_("unplug of device was rejected by the guest"));
return -1;
}
return 1;
}
/* Returns:
* true there was a thread waiting for devAlias to be removed and this
* thread will take care of finishing the removal
* false the thread that started the removal is already gone and delegate
* finishing the removal to a new thread
*/
bool
qemuDomainSignalDeviceRemoval(virDomainObjPtr vm,
const char *devAlias,
qemuDomainUnpluggingDeviceStatus status)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
if (STREQ_NULLABLE(priv->unplug.alias, devAlias)) {
VIR_DEBUG("Removal of device '%s' continues in waiting thread", devAlias);
qemuDomainResetDeviceRemoval(vm);
priv->unplug.status = status;
virDomainObjBroadcast(vm);
return true;
}
return false;
}
static int
qemuDomainDetachVirtioDiskDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDiskDefPtr detach,
bool async)
{
int ret = -1;
qemuDomainObjPrivatePtr priv = vm->privateData;
if (qemuIsMultiFunctionDevice(vm->def, &detach->info)) {
virReportError(VIR_ERR_OPERATION_FAILED,
_("cannot hot unplug multifunction PCI device: %s"),
detach->dst);
goto cleanup;
}
if (!detach->info.alias) {
if (qemuAssignDeviceDiskAlias(vm->def, detach) < 0)
goto cleanup;
}
if (!async)
qemuDomainMarkDeviceForRemoval(vm, &detach->info);
qemuDomainObjEnterMonitor(driver, vm);
if (qemuMonitorDelDevice(priv->mon, detach->info.alias) < 0) {
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
virDomainAuditDisk(vm, detach->src, NULL, "detach", false);
goto cleanup;
}
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
if (async) {
ret = 0;
} else {
if ((ret = qemuDomainWaitForDeviceRemoval(vm)) == 1)
ret = qemuDomainRemoveDiskDevice(driver, vm, detach);
}
cleanup:
if (!async)
qemuDomainResetDeviceRemoval(vm);
return ret;
}
static int
qemuDomainDetachDiskDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDiskDefPtr detach,
bool async)
{
int ret = -1;
qemuDomainObjPrivatePtr priv = vm->privateData;
if (qemuDomainDiskBlockJobIsActive(detach))
goto cleanup;
if (!async)
qemuDomainMarkDeviceForRemoval(vm, &detach->info);
qemuDomainObjEnterMonitor(driver, vm);
if (qemuMonitorDelDevice(priv->mon, detach->info.alias) < 0) {
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
virDomainAuditDisk(vm, detach->src, NULL, "detach", false);
goto cleanup;
}
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
if (async) {
ret = 0;
} else {
if ((ret = qemuDomainWaitForDeviceRemoval(vm)) == 1)
ret = qemuDomainRemoveDiskDevice(driver, vm, detach);
}
cleanup:
if (!async)
qemuDomainResetDeviceRemoval(vm);
return ret;
}
static int
qemuFindDisk(virDomainDefPtr def, const char *dst)
{
size_t i;
for (i = 0; i < def->ndisks; i++) {
if (STREQ(def->disks[i]->dst, dst))
return i;
}
return -1;
}
int
qemuDomainDetachDeviceDiskLive(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDeviceDefPtr dev,
bool async)
{
virDomainDiskDefPtr disk;
int ret = -1;
int idx;
if ((idx = qemuFindDisk(vm->def, dev->data.disk->dst)) < 0) {
virReportError(VIR_ERR_OPERATION_FAILED,
_("disk %s not found"), dev->data.disk->dst);
return -1;
}
disk = vm->def->disks[idx];
switch (disk->device) {
case VIR_DOMAIN_DISK_DEVICE_DISK:
case VIR_DOMAIN_DISK_DEVICE_LUN:
if (disk->bus == VIR_DOMAIN_DISK_BUS_VIRTIO)
ret = qemuDomainDetachVirtioDiskDevice(driver, vm, disk, async);
else if (disk->bus == VIR_DOMAIN_DISK_BUS_SCSI ||
disk->bus == VIR_DOMAIN_DISK_BUS_USB)
ret = qemuDomainDetachDiskDevice(driver, vm, disk, async);
else
virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
_("This type of disk cannot be hot unplugged"));
break;
default:
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("disk device type '%s' cannot be detached"),
virDomainDiskDeviceTypeToString(disk->device));
break;
}
return ret;
}
static bool qemuDomainDiskControllerIsBusy(virDomainObjPtr vm,
virDomainControllerDefPtr detach)
{
size_t i;
virDomainDiskDefPtr disk;
virDomainHostdevDefPtr hostdev;
for (i = 0; i < vm->def->ndisks; i++) {
disk = vm->def->disks[i];
if (disk->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_DRIVE)
/* the disk does not use disk controller */
continue;
/* check whether the disk uses this type controller */
if (disk->bus == VIR_DOMAIN_DISK_BUS_IDE &&
detach->type != VIR_DOMAIN_CONTROLLER_TYPE_IDE)
continue;
if (disk->bus == VIR_DOMAIN_DISK_BUS_FDC &&
detach->type != VIR_DOMAIN_CONTROLLER_TYPE_FDC)
continue;
if (disk->bus == VIR_DOMAIN_DISK_BUS_SCSI &&
detach->type != VIR_DOMAIN_CONTROLLER_TYPE_SCSI)
continue;
if (disk->info.addr.drive.controller == detach->idx)
return true;
}
for (i = 0; i < vm->def->nhostdevs; i++) {
hostdev = vm->def->hostdevs[i];
if (!virHostdevIsSCSIDevice(hostdev) ||
detach->type != VIR_DOMAIN_CONTROLLER_TYPE_SCSI)
continue;
if (hostdev->info->addr.drive.controller == detach->idx)
return true;
}
return false;
}
static bool qemuDomainControllerIsBusy(virDomainObjPtr vm,
virDomainControllerDefPtr detach)
{
switch (detach->type) {
case VIR_DOMAIN_CONTROLLER_TYPE_IDE:
case VIR_DOMAIN_CONTROLLER_TYPE_FDC:
case VIR_DOMAIN_CONTROLLER_TYPE_SCSI:
return qemuDomainDiskControllerIsBusy(vm, detach);
case VIR_DOMAIN_CONTROLLER_TYPE_SATA:
case VIR_DOMAIN_CONTROLLER_TYPE_VIRTIO_SERIAL:
case VIR_DOMAIN_CONTROLLER_TYPE_CCID:
default:
/* libvirt does not support sata controller, and does not support to
* detach virtio and smart card controller.
*/
return true;
}
}
int qemuDomainDetachControllerDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDeviceDefPtr dev,
bool async)
{
int idx, ret = -1;
virDomainControllerDefPtr detach = NULL;
qemuDomainObjPrivatePtr priv = vm->privateData;
if ((idx = virDomainControllerFind(vm->def,
dev->data.controller->type,
dev->data.controller->idx)) < 0) {
virReportError(VIR_ERR_DEVICE_MISSING,
_("controller %s:%d not found"),
virDomainControllerTypeToString(dev->data.controller->type),
dev->data.controller->idx);
goto cleanup;
}
detach = vm->def->controllers[idx];
if (detach->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI &&
detach->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_CCW &&
detach->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_S390) {
virReportError(VIR_ERR_OPERATION_FAILED,
_("device with '%s' address cannot be detached"),
virDomainDeviceAddressTypeToString(detach->info.type));
goto cleanup;
}
if (!virDomainDeviceAddressIsValid(&detach->info, detach->info.type)) {
virReportError(VIR_ERR_OPERATION_FAILED,
_("device with invalid '%s' address cannot be detached"),
virDomainDeviceAddressTypeToString(detach->info.type));
goto cleanup;
}
if (qemuIsMultiFunctionDevice(vm->def, &detach->info)) {
virReportError(VIR_ERR_OPERATION_FAILED,
_("cannot hot unplug multifunction PCI device: %s"),
dev->data.disk->dst);
goto cleanup;
}
if (qemuDomainControllerIsBusy(vm, detach)) {
virReportError(VIR_ERR_OPERATION_FAILED, "%s",
_("device cannot be detached: device is busy"));
goto cleanup;
}
if (!detach->info.alias) {
if (qemuAssignDeviceControllerAlias(vm->def, priv->qemuCaps, detach) < 0)
goto cleanup;
}
if (!async)
qemuDomainMarkDeviceForRemoval(vm, &detach->info);
qemuDomainObjEnterMonitor(driver, vm);
if (qemuMonitorDelDevice(priv->mon, detach->info.alias)) {
ignore_value(qemuDomainObjExitMonitor(driver, vm));
goto cleanup;
}
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
if (async) {
ret = 0;
} else {
if ((ret = qemuDomainWaitForDeviceRemoval(vm)) == 1)
ret = qemuDomainRemoveControllerDevice(driver, vm, detach);
}
cleanup:
if (!async)
qemuDomainResetDeviceRemoval(vm);
return ret;
}
static int
qemuDomainDetachHostPCIDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainHostdevDefPtr detach,
bool async)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
virDomainHostdevSubsysPCIPtr pcisrc = &detach->source.subsys.u.pci;
int ret;
if (qemuIsMultiFunctionDevice(vm->def, detach->info)) {
virReportError(VIR_ERR_OPERATION_FAILED,
_("cannot hot unplug multifunction PCI device: %.4x:%.2x:%.2x.%.1x"),
pcisrc->addr.domain, pcisrc->addr.bus,
pcisrc->addr.slot, pcisrc->addr.function);
return -1;
}
if (!async)
qemuDomainMarkDeviceForRemoval(vm, detach->info);
qemuDomainObjEnterMonitor(driver, vm);
ret = qemuMonitorDelDevice(priv->mon, detach->info->alias);
if (qemuDomainObjExitMonitor(driver, vm) < 0)
ret = -1;
return ret;
}
static int
qemuDomainDetachHostUSBDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainHostdevDefPtr detach,
bool async)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
int ret;
if (!detach->info->alias) {
virReportError(VIR_ERR_OPERATION_FAILED,
"%s", _("device cannot be detached without a device alias"));
return -1;
}
if (!async)
qemuDomainMarkDeviceForRemoval(vm, detach->info);
qemuDomainObjEnterMonitor(driver, vm);
ret = qemuMonitorDelDevice(priv->mon, detach->info->alias);
if (qemuDomainObjExitMonitor(driver, vm) < 0)
ret = -1;
return ret;
}
static int
qemuDomainDetachHostSCSIDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainHostdevDefPtr detach,
bool async)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
int ret = -1;
if (!detach->info->alias) {
virReportError(VIR_ERR_OPERATION_FAILED,
"%s", _("device cannot be detached without a device alias"));
return -1;
}
if (!async)
qemuDomainMarkDeviceForRemoval(vm, detach->info);
qemuDomainObjEnterMonitor(driver, vm);
ret = qemuMonitorDelDevice(priv->mon, detach->info->alias);
if (qemuDomainObjExitMonitor(driver, vm) < 0)
return -1;
return ret;
}
static int
qemuDomainDetachSCSIVHostDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainHostdevDefPtr detach,
bool async)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
int ret = -1;
if (!detach->info->alias) {
virReportError(VIR_ERR_OPERATION_FAILED,
"%s", _("device cannot be detached without a device alias"));
return -1;
}
if (!async)
qemuDomainMarkDeviceForRemoval(vm, detach->info);
qemuDomainObjEnterMonitor(driver, vm);
ret = qemuMonitorDelDevice(priv->mon, detach->info->alias);
if (qemuDomainObjExitMonitor(driver, vm) < 0)
return -1;
return ret;
}
static int
qemuDomainDetachMediatedDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainHostdevDefPtr detach,
bool async)
{
int ret = -1;
qemuDomainObjPrivatePtr priv = vm->privateData;
if (!detach->info->alias) {
virReportError(VIR_ERR_OPERATION_FAILED, "%s",
_("device cannot be detached without a device alias"));
return -1;
}
if (!async)
qemuDomainMarkDeviceForRemoval(vm, detach->info);
qemuDomainObjEnterMonitor(driver, vm);
ret = qemuMonitorDelDevice(priv->mon, detach->info->alias);
if (qemuDomainObjExitMonitor(driver, vm) < 0)
ret = -1;
return ret;
}
static int
qemuDomainDetachThisHostDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainHostdevDefPtr detach,
bool async)
{
int ret = -1;
if (qemuAssignDeviceHostdevAlias(vm->def, &detach->info->alias, -1) < 0)
return -1;
switch (detach->source.subsys.type) {
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI:
ret = qemuDomainDetachHostPCIDevice(driver, vm, detach, async);
break;
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB:
ret = qemuDomainDetachHostUSBDevice(driver, vm, detach, async);
break;
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI:
ret = qemuDomainDetachHostSCSIDevice(driver, vm, detach, async);
break;
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI_HOST:
ret = qemuDomainDetachSCSIVHostDevice(driver, vm, detach, async);
break;
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_MDEV:
ret = qemuDomainDetachMediatedDevice(driver, vm, detach, async);
break;
default:
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
_("hot unplug is not supported for hostdev subsys type '%s'"),
virDomainHostdevSubsysTypeToString(detach->source.subsys.type));
return -1;
}
if (ret < 0) {
if (virDomainObjIsActive(vm))
virDomainAuditHostdev(vm, detach, "detach", false);
} else if (!async &&
(ret = qemuDomainWaitForDeviceRemoval(vm)) == 1) {
ret = qemuDomainRemoveHostDevice(driver, vm, detach);
}
if (!async)
qemuDomainResetDeviceRemoval(vm);
return ret;
}
/* search for a hostdev matching dev and detach it */
int qemuDomainDetachHostDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDeviceDefPtr dev,
bool async)
{
virDomainHostdevDefPtr hostdev = dev->data.hostdev;
virDomainHostdevSubsysPtr subsys = &hostdev->source.subsys;
virDomainHostdevSubsysUSBPtr usbsrc = &subsys->u.usb;
virDomainHostdevSubsysPCIPtr pcisrc = &subsys->u.pci;
virDomainHostdevSubsysSCSIPtr scsisrc = &subsys->u.scsi;
virDomainHostdevSubsysMediatedDevPtr mdevsrc = &subsys->u.mdev;
virDomainHostdevDefPtr detach = NULL;
int idx;
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
_("hot unplug is not supported for hostdev mode '%s'"),
virDomainHostdevModeTypeToString(hostdev->mode));
return -1;
}
idx = virDomainHostdevFind(vm->def, hostdev, &detach);
if (idx < 0) {
switch (subsys->type) {
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI:
virReportError(VIR_ERR_DEVICE_MISSING,
_("host pci device %.4x:%.2x:%.2x.%.1x not found"),
pcisrc->addr.domain, pcisrc->addr.bus,
pcisrc->addr.slot, pcisrc->addr.function);
break;
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB:
if (usbsrc->bus && usbsrc->device) {
virReportError(VIR_ERR_DEVICE_MISSING,
_("host usb device %03d.%03d not found"),
usbsrc->bus, usbsrc->device);
} else {
virReportError(VIR_ERR_DEVICE_MISSING,
_("host usb device vendor=0x%.4x product=0x%.4x not found"),
usbsrc->vendor, usbsrc->product);
}
break;
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI: {
if (scsisrc->protocol ==
VIR_DOMAIN_HOSTDEV_SCSI_PROTOCOL_TYPE_ISCSI) {
virDomainHostdevSubsysSCSIiSCSIPtr iscsisrc = &scsisrc->u.iscsi;
virReportError(VIR_ERR_DEVICE_MISSING,
_("host scsi iSCSI path %s not found"),
iscsisrc->src->path);
} else {
virDomainHostdevSubsysSCSIHostPtr scsihostsrc =
&scsisrc->u.host;
virReportError(VIR_ERR_DEVICE_MISSING,
_("host scsi device %s:%u:%u.%llu not found"),
scsihostsrc->adapter, scsihostsrc->bus,
scsihostsrc->target, scsihostsrc->unit);
}
break;
}
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_MDEV:
virReportError(VIR_ERR_DEVICE_MISSING,
_("mediated device '%s' not found"),
mdevsrc->uuidstr);
break;
case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI_HOST:
break;
default:
virReportError(VIR_ERR_INTERNAL_ERROR,
_("unexpected hostdev type %d"), subsys->type);
break;
}
return -1;
}
/* If this is a network hostdev, we need to use the higher-level detach
* function so that mac address / virtualport are reset
*/
if (detach->parent.type == VIR_DOMAIN_DEVICE_NET)
return qemuDomainDetachNetDevice(driver, vm, &detach->parent, async);
else
return qemuDomainDetachThisHostDevice(driver, vm, detach, async);
}
int
qemuDomainDetachShmemDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainShmemDefPtr dev,
bool async)
{
int ret = -1;
ssize_t idx = -1;
virDomainShmemDefPtr shmem = NULL;
qemuDomainObjPrivatePtr priv = vm->privateData;
if ((idx = virDomainShmemDefFind(vm->def, dev)) < 0) {
virReportError(VIR_ERR_DEVICE_MISSING,
_("model '%s' shmem device not present "
"in domain configuration"),
virDomainShmemModelTypeToString(dev->model));
return -1;
}
shmem = vm->def->shmems[idx];
switch ((virDomainShmemModel)shmem->model) {
case VIR_DOMAIN_SHMEM_MODEL_IVSHMEM_PLAIN:
case VIR_DOMAIN_SHMEM_MODEL_IVSHMEM_DOORBELL:
break;
case VIR_DOMAIN_SHMEM_MODEL_IVSHMEM:
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("live detach of shmem model '%s' is not supported"),
virDomainShmemModelTypeToString(shmem->model));
ATTRIBUTE_FALLTHROUGH;
case VIR_DOMAIN_SHMEM_MODEL_LAST:
return -1;
}
if (!async)
qemuDomainMarkDeviceForRemoval(vm, &shmem->info);
qemuDomainObjEnterMonitor(driver, vm);
if (qemuMonitorDelDevice(priv->mon, shmem->info.alias) < 0) {
ignore_value(qemuDomainObjExitMonitor(driver, vm));
goto cleanup;
}
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
if ((ret = qemuDomainWaitForDeviceRemoval(vm)) == 1)
ret = qemuDomainRemoveShmemDevice(driver, vm, shmem);
cleanup:
qemuDomainResetDeviceRemoval(vm);
return ret;
}
int
qemuDomainDetachWatchdog(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainWatchdogDefPtr dev,
bool async)
{
int ret = -1;
virDomainWatchdogDefPtr watchdog = vm->def->watchdog;
qemuDomainObjPrivatePtr priv = vm->privateData;
if (!watchdog) {
virReportError(VIR_ERR_DEVICE_MISSING, "%s",
_("watchdog device not present in domain configuration"));
return -1;
}
/* While domains can have up to one watchdog, the one supplied by the user
* doesn't necessarily match the one domain has. Refuse to detach in such
* case. */
if (!(watchdog->model == dev->model &&
watchdog->action == dev->action &&
virDomainDeviceInfoAddressIsEqual(&dev->info, &watchdog->info))) {
virReportError(VIR_ERR_DEVICE_MISSING,
_("model '%s' watchdog device not present "
"in domain configuration"),
virDomainWatchdogModelTypeToString(watchdog->model));
return -1;
}
if (watchdog->model != VIR_DOMAIN_WATCHDOG_MODEL_I6300ESB) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("hot unplug of watchdog of model %s is not supported"),
virDomainWatchdogModelTypeToString(watchdog->model));
return -1;
}
if (!async)
qemuDomainMarkDeviceForRemoval(vm, &watchdog->info);
qemuDomainObjEnterMonitor(driver, vm);
if (qemuMonitorDelDevice(priv->mon, watchdog->info.alias) < 0) {
ignore_value(qemuDomainObjExitMonitor(driver, vm));
goto cleanup;
}
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
if (async) {
ret = 0;
} else {
if ((ret = qemuDomainWaitForDeviceRemoval(vm)) == 1)
ret = qemuDomainRemoveWatchdog(driver, vm, watchdog);
}
cleanup:
if (!async)
qemuDomainResetDeviceRemoval(vm);
return ret;
}
int
qemuDomainDetachRedirdevDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainRedirdevDefPtr dev,
bool async)
{
int ret = -1;
qemuDomainObjPrivatePtr priv = vm->privateData;
virDomainRedirdevDefPtr tmpRedirdevDef;
ssize_t idx;
if ((idx = virDomainRedirdevDefFind(vm->def, dev)) < 0) {
virReportError(VIR_ERR_OPERATION_INVALID, "%s",
_("no matching redirdev was not found"));
return -1;
}
tmpRedirdevDef = vm->def->redirdevs[idx];
if (!tmpRedirdevDef->info.alias) {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
_("alias not set for redirdev device"));
return -1;
}
if (!async)
qemuDomainMarkDeviceForRemoval(vm, &tmpRedirdevDef->info);
qemuDomainObjEnterMonitor(driver, vm);
if (qemuMonitorDelDevice(priv->mon, tmpRedirdevDef->info.alias) < 0) {
ignore_value(qemuDomainObjExitMonitor(driver, vm));
goto cleanup;
}
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
if (async) {
ret = 0;
} else {
if ((ret = qemuDomainWaitForDeviceRemoval(vm)) == 1)
ret = qemuDomainRemoveRedirdevDevice(driver, vm, tmpRedirdevDef);
}
cleanup:
if (!async)
qemuDomainResetDeviceRemoval(vm);
return ret;
}
int
qemuDomainDetachNetDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDeviceDefPtr dev,
bool async)
{
int detachidx, ret = -1;
virDomainNetDefPtr detach = NULL;
qemuDomainObjPrivatePtr priv = vm->privateData;
if ((detachidx = virDomainNetFindIdx(vm->def, dev->data.net)) < 0)
goto cleanup;
detach = vm->def->nets[detachidx];
if (virDomainNetGetActualType(detach) == VIR_DOMAIN_NET_TYPE_HOSTDEV) {
ret = qemuDomainDetachThisHostDevice(driver, vm,
virDomainNetGetActualHostdev(detach),
async);
goto cleanup;
}
if (qemuIsMultiFunctionDevice(vm->def, &detach->info)) {
virReportError(VIR_ERR_OPERATION_FAILED,
_("cannot hot unplug multifunction PCI device: %s"),
dev->data.disk->dst);
goto cleanup;
}
if (!detach->info.alias) {
if (qemuAssignDeviceNetAlias(vm->def, detach, -1) < 0)
goto cleanup;
}
if (virDomainNetGetActualBandwidth(detach) &&
virNetDevSupportBandwidth(virDomainNetGetActualType(detach)) &&
virNetDevBandwidthClear(detach->ifname) < 0)
VIR_WARN("cannot clear bandwidth setting for device : %s",
detach->ifname);
/* deactivate the tap/macvtap device on the host, which could also
* affect the parent device (e.g. macvtap passthrough mode sets
* the parent device offline)
*/
ignore_value(qemuInterfaceStopDevice(detach));
if (!async)
qemuDomainMarkDeviceForRemoval(vm, &detach->info);
qemuDomainObjEnterMonitor(driver, vm);
if (qemuMonitorDelDevice(priv->mon, detach->info.alias) < 0) {
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
virDomainAuditNet(vm, detach, NULL, "detach", false);
goto cleanup;
}
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
if (async) {
ret = 0;
} else {
if ((ret = qemuDomainWaitForDeviceRemoval(vm)) == 1)
ret = qemuDomainRemoveNetDevice(driver, vm, detach);
}
cleanup:
if (!async)
qemuDomainResetDeviceRemoval(vm);
return ret;
}
int
qemuDomainChangeGraphicsPasswords(virQEMUDriverPtr driver,
virDomainObjPtr vm,
int type,
virDomainGraphicsAuthDefPtr auth,
const char *defaultPasswd,
int asyncJob)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
time_t now = time(NULL);
const char *expire;
char *validTo = NULL;
const char *connected = NULL;
const char *password;
int ret = -1;
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
if (!auth->passwd && !defaultPasswd) {
ret = 0;
goto cleanup;
}
password = auth->passwd ? auth->passwd : defaultPasswd;
if (auth->connected)
connected = virDomainGraphicsAuthConnectedTypeToString(auth->connected);
if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
goto cleanup;
ret = qemuMonitorSetPassword(priv->mon, type, password, connected);
if (ret == -2) {
if (type != VIR_DOMAIN_GRAPHICS_TYPE_VNC) {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
_("Graphics password only supported for VNC"));
ret = -1;
} else {
ret = qemuMonitorSetVNCPassword(priv->mon, password);
}
}
if (ret != 0)
goto end_job;
if (password[0] == '\0' ||
(auth->expires && auth->validTo <= now)) {
expire = "now";
} else if (auth->expires) {
if (virAsprintf(&validTo, "%lu", (unsigned long)auth->validTo) < 0)
goto end_job;
expire = validTo;
} else {
expire = "never";
}
ret = qemuMonitorExpirePassword(priv->mon, type, expire);
if (ret == -2) {
/* XXX we could fake this with a timer */
if (auth->expires) {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
_("Expiry of passwords is not supported"));
ret = -1;
} else {
ret = 0;
}
}
end_job:
if (qemuDomainObjExitMonitor(driver, vm) < 0)
ret = -1;
cleanup:
VIR_FREE(validTo);
virObjectUnref(cfg);
return ret;
}
int qemuDomainAttachLease(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainLeaseDefPtr lease)
{
int ret = -1;
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
if (virDomainLeaseInsertPreAlloc(vm->def) < 0)
goto cleanup;
if (virDomainLockLeaseAttach(driver->lockManager, cfg->uri,
vm, lease) < 0) {
virDomainLeaseInsertPreAlloced(vm->def, NULL);
goto cleanup;
}
virDomainLeaseInsertPreAlloced(vm->def, lease);
ret = 0;
cleanup:
virObjectUnref(cfg);
return ret;
}
int qemuDomainDetachLease(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainLeaseDefPtr lease)
{
virDomainLeaseDefPtr det_lease;
int idx;
if ((idx = virDomainLeaseIndex(vm->def, lease)) < 0) {
virReportError(VIR_ERR_INVALID_ARG,
_("Lease %s in lockspace %s does not exist"),
lease->key, NULLSTR(lease->lockspace));
return -1;
}
if (virDomainLockLeaseDetach(driver->lockManager, vm, lease) < 0)
return -1;
det_lease = virDomainLeaseRemoveAt(vm->def, idx);
virDomainLeaseDefFree(det_lease);
return 0;
}
int qemuDomainDetachChrDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainChrDefPtr chr,
bool async)
{
int ret = -1;
qemuDomainObjPrivatePtr priv = vm->privateData;
virDomainDefPtr vmdef = vm->def;
virDomainChrDefPtr tmpChr;
char *devstr = NULL;
if (!(tmpChr = virDomainChrFind(vmdef, chr))) {
virReportError(VIR_ERR_DEVICE_MISSING,
_("chr type '%s' device not present "
"in domain configuration"),
virDomainChrDeviceTypeToString(chr->deviceType));
goto cleanup;
}
if (!tmpChr->info.alias && qemuAssignDeviceChrAlias(vmdef, tmpChr, -1) < 0)
goto cleanup;
sa_assert(tmpChr->info.alias);
if (qemuBuildChrDeviceStr(&devstr, vmdef, chr, priv->qemuCaps) < 0)
goto cleanup;
if (!async)
qemuDomainMarkDeviceForRemoval(vm, &tmpChr->info);
qemuDomainObjEnterMonitor(driver, vm);
if (devstr && qemuMonitorDelDevice(priv->mon, tmpChr->info.alias) < 0) {
ignore_value(qemuDomainObjExitMonitor(driver, vm));
goto cleanup;
}
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
if (async) {
ret = 0;
} else {
if ((ret = qemuDomainWaitForDeviceRemoval(vm)) == 1)
ret = qemuDomainRemoveChrDevice(driver, vm, tmpChr);
}
cleanup:
if (!async)
qemuDomainResetDeviceRemoval(vm);
VIR_FREE(devstr);
return ret;
}
int
qemuDomainDetachRNGDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainRNGDefPtr rng,
bool async)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
ssize_t idx;
virDomainRNGDefPtr tmpRNG;
int rc;
int ret = -1;
if ((idx = virDomainRNGFind(vm->def, rng)) < 0) {
virReportError(VIR_ERR_DEVICE_MISSING,
_("model '%s' RNG device not present "
"in domain configuration"),
virDomainRNGBackendTypeToString(rng->model));
return -1;
}
tmpRNG = vm->def->rngs[idx];
if (!tmpRNG->info.alias) {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
_("alias not set for RNG device"));
return -1;
}
if (!async)
qemuDomainMarkDeviceForRemoval(vm, &tmpRNG->info);
qemuDomainObjEnterMonitor(driver, vm);
rc = qemuMonitorDelDevice(priv->mon, tmpRNG->info.alias);
if (qemuDomainObjExitMonitor(driver, vm) || rc < 0)
goto cleanup;
if (async) {
ret = 0;
} else {
if ((ret = qemuDomainWaitForDeviceRemoval(vm)) == 1)
ret = qemuDomainRemoveRNGDevice(driver, vm, tmpRNG);
}
cleanup:
if (!async)
qemuDomainResetDeviceRemoval(vm);
return ret;
}
int
qemuDomainDetachMemoryDevice(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainMemoryDefPtr memdef,
bool async)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
virDomainMemoryDefPtr mem;
int idx;
int rc;
int ret = -1;
qemuDomainMemoryDeviceAlignSize(vm->def, memdef);
if ((idx = virDomainMemoryFindByDef(vm->def, memdef)) < 0) {
virReportError(VIR_ERR_DEVICE_MISSING,
_("model '%s' memory device not present "
"in the domain configuration"),
virDomainMemoryModelTypeToString(memdef->model));
return -1;
}
mem = vm->def->mems[idx];
if (!mem->info.alias) {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
_("alias for the memory device was not found"));
return -1;
}
if (!async)
qemuDomainMarkDeviceForRemoval(vm, &mem->info);
qemuDomainObjEnterMonitor(driver, vm);
rc = qemuMonitorDelDevice(priv->mon, mem->info.alias);
if (qemuDomainObjExitMonitor(driver, vm) < 0 || rc < 0)
goto cleanup;
if (async) {
ret = 0;
} else {
if ((ret = qemuDomainWaitForDeviceRemoval(vm)) == 1)
ret = qemuDomainRemoveMemoryDevice(driver, vm, mem);
}
cleanup:
if (!async)
qemuDomainResetDeviceRemoval(vm);
return ret;
}
static int
qemuDomainRemoveVcpu(virQEMUDriverPtr driver,
virDomainObjPtr vm,
unsigned int vcpu)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
virDomainVcpuDefPtr vcpuinfo = virDomainDefGetVcpu(vm->def, vcpu);
qemuDomainVcpuPrivatePtr vcpupriv = QEMU_DOMAIN_VCPU_PRIVATE(vcpuinfo);
int oldvcpus = virDomainDefGetVcpus(vm->def);
unsigned int nvcpus = vcpupriv->vcpus;
virErrorPtr save_error = NULL;
size_t i;
if (qemuDomainRefreshVcpuInfo(driver, vm, QEMU_ASYNC_JOB_NONE, false) < 0)
return -1;
/* validation requires us to set the expected state prior to calling it */
for (i = vcpu; i < vcpu + nvcpus; i++) {
vcpuinfo = virDomainDefGetVcpu(vm->def, i);
vcpuinfo->online = false;
}
if (qemuDomainValidateVcpuInfo(vm) < 0) {
/* rollback vcpu count if the setting has failed */
virDomainAuditVcpu(vm, oldvcpus, oldvcpus - nvcpus, "update", false);
for (i = vcpu; i < vcpu + nvcpus; i++) {
vcpuinfo = virDomainDefGetVcpu(vm->def, i);
vcpuinfo->online = true;
}
return -1;
}
virDomainAuditVcpu(vm, oldvcpus, oldvcpus - nvcpus, "update", true);
virErrorPreserveLast(&save_error);
for (i = vcpu; i < vcpu + nvcpus; i++)
ignore_value(virCgroupDelThread(priv->cgroup, VIR_CGROUP_THREAD_VCPU, i));
virErrorRestore(&save_error);
return 0;
}
void
qemuDomainRemoveVcpuAlias(virQEMUDriverPtr driver,
virDomainObjPtr vm,
const char *alias)
{
virDomainVcpuDefPtr vcpu;
qemuDomainVcpuPrivatePtr vcpupriv;
size_t i;
for (i = 0; i < virDomainDefGetVcpusMax(vm->def); i++) {
vcpu = virDomainDefGetVcpu(vm->def, i);
vcpupriv = QEMU_DOMAIN_VCPU_PRIVATE(vcpu);
if (STREQ_NULLABLE(alias, vcpupriv->alias)) {
qemuDomainRemoveVcpu(driver, vm, i);
return;
}
}
}
static int
qemuDomainHotplugDelVcpu(virQEMUDriverPtr driver,
virQEMUDriverConfigPtr cfg,
virDomainObjPtr vm,
unsigned int vcpu)
{
virDomainVcpuDefPtr vcpuinfo = virDomainDefGetVcpu(vm->def, vcpu);
qemuDomainVcpuPrivatePtr vcpupriv = QEMU_DOMAIN_VCPU_PRIVATE(vcpuinfo);
int oldvcpus = virDomainDefGetVcpus(vm->def);
unsigned int nvcpus = vcpupriv->vcpus;
int rc;
int ret = -1;
if (!vcpupriv->alias) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("vcpu '%u' can't be unplugged"), vcpu);
return -1;
}
qemuDomainMarkDeviceAliasForRemoval(vm, vcpupriv->alias);
qemuDomainObjEnterMonitor(driver, vm);
rc = qemuMonitorDelDevice(qemuDomainGetMonitor(vm), vcpupriv->alias);
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
if (rc < 0) {
virDomainAuditVcpu(vm, oldvcpus, oldvcpus - nvcpus, "update", false);
goto cleanup;
}
if ((rc = qemuDomainWaitForDeviceRemoval(vm)) <= 0) {
if (rc == 0)
virReportError(VIR_ERR_OPERATION_FAILED, "%s",
_("vcpu unplug request timed out"));
goto cleanup;
}
if (qemuDomainRemoveVcpu(driver, vm, vcpu) < 0)
goto cleanup;
qemuDomainVcpuPersistOrder(vm->def);
if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm, driver->caps) < 0)
goto cleanup;
ret = 0;
cleanup:
qemuDomainResetDeviceRemoval(vm);
return ret;
}
static int
qemuDomainHotplugAddVcpu(virQEMUDriverPtr driver,
virQEMUDriverConfigPtr cfg,
virDomainObjPtr vm,
unsigned int vcpu)
{
virJSONValuePtr vcpuprops = NULL;
virDomainVcpuDefPtr vcpuinfo = virDomainDefGetVcpu(vm->def, vcpu);
qemuDomainVcpuPrivatePtr vcpupriv = QEMU_DOMAIN_VCPU_PRIVATE(vcpuinfo);
unsigned int nvcpus = vcpupriv->vcpus;
bool newhotplug = qemuDomainSupportsNewVcpuHotplug(vm);
int ret = -1;
int rc;
int oldvcpus = virDomainDefGetVcpus(vm->def);
size_t i;
if (newhotplug) {
if (virAsprintf(&vcpupriv->alias, "vcpu%u", vcpu) < 0)
goto cleanup;
if (!(vcpuprops = qemuBuildHotpluggableCPUProps(vcpuinfo)))
goto cleanup;
}
qemuDomainObjEnterMonitor(driver, vm);
if (newhotplug) {
rc = qemuMonitorAddDeviceArgs(qemuDomainGetMonitor(vm), vcpuprops);
vcpuprops = NULL;
} else {
rc = qemuMonitorSetCPU(qemuDomainGetMonitor(vm), vcpu, true);
}
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
virDomainAuditVcpu(vm, oldvcpus, oldvcpus + nvcpus, "update", rc == 0);
if (rc < 0)
goto cleanup;
/* start outputting of the new XML element to allow keeping unpluggability */
if (newhotplug)
vm->def->individualvcpus = true;
if (qemuDomainRefreshVcpuInfo(driver, vm, QEMU_ASYNC_JOB_NONE, false) < 0)
goto cleanup;
/* validation requires us to set the expected state prior to calling it */
for (i = vcpu; i < vcpu + nvcpus; i++) {
vcpuinfo = virDomainDefGetVcpu(vm->def, i);
vcpupriv = QEMU_DOMAIN_VCPU_PRIVATE(vcpuinfo);
vcpuinfo->online = true;
if (vcpupriv->tid > 0 &&
qemuProcessSetupVcpu(vm, i) < 0)
goto cleanup;
}
if (qemuDomainValidateVcpuInfo(vm) < 0)
goto cleanup;
qemuDomainVcpuPersistOrder(vm->def);
if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm, driver->caps) < 0)
goto cleanup;
ret = 0;
cleanup:
virJSONValueFree(vcpuprops);
return ret;
}
/**
* qemuDomainSelectHotplugVcpuEntities:
*
* @def: domain definition
* @nvcpus: target vcpu count
* @enable: set to true if vcpus should be enabled
*
* Tries to find which vcpu entities need to be enabled or disabled to reach
* @nvcpus. This function works in order of the legacy hotplug but is able to
* skip over entries that are added out of order.
*
* Returns the bitmap of vcpus to modify on success, NULL on error.
*/
static virBitmapPtr
qemuDomainSelectHotplugVcpuEntities(virDomainDefPtr def,
unsigned int nvcpus,
bool *enable)
{
virBitmapPtr ret = NULL;
virDomainVcpuDefPtr vcpu;
qemuDomainVcpuPrivatePtr vcpupriv;
unsigned int maxvcpus = virDomainDefGetVcpusMax(def);
unsigned int curvcpus = virDomainDefGetVcpus(def);
ssize_t i;
if (!(ret = virBitmapNew(maxvcpus)))
return NULL;
if (nvcpus > curvcpus) {
*enable = true;
for (i = 0; i < maxvcpus && curvcpus < nvcpus; i++) {
vcpu = virDomainDefGetVcpu(def, i);
vcpupriv = QEMU_DOMAIN_VCPU_PRIVATE(vcpu);
if (vcpu->online)
continue;
if (vcpupriv->vcpus == 0)
continue;
curvcpus += vcpupriv->vcpus;
if (curvcpus > nvcpus) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("target vm vcpu granularity does not allow the "
"desired vcpu count"));
goto error;
}
ignore_value(virBitmapSetBit(ret, i));
}
} else {
*enable = false;
for (i = maxvcpus - 1; i >= 0 && curvcpus > nvcpus; i--) {
vcpu = virDomainDefGetVcpu(def, i);
vcpupriv = QEMU_DOMAIN_VCPU_PRIVATE(vcpu);
if (!vcpu->online)
continue;
if (vcpupriv->vcpus == 0)
continue;
if (!vcpupriv->alias)
continue;
curvcpus -= vcpupriv->vcpus;
if (curvcpus < nvcpus) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("target vm vcpu granularity does not allow the "
"desired vcpu count"));
goto error;
}
ignore_value(virBitmapSetBit(ret, i));
}
}
if (curvcpus != nvcpus) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("failed to find appropriate hotpluggable vcpus to "
"reach the desired target vcpu count"));
goto error;
}
return ret;
error:
virBitmapFree(ret);
return NULL;
}
static int
qemuDomainSetVcpusLive(virQEMUDriverPtr driver,
virQEMUDriverConfigPtr cfg,
virDomainObjPtr vm,
virBitmapPtr vcpumap,
bool enable)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
qemuCgroupEmulatorAllNodesDataPtr emulatorCgroup = NULL;
ssize_t nextvcpu = -1;
int ret = -1;
if (qemuCgroupEmulatorAllNodesAllow(priv->cgroup, &emulatorCgroup) < 0)
goto cleanup;
if (enable) {
while ((nextvcpu = virBitmapNextSetBit(vcpumap, nextvcpu)) != -1) {
if (qemuDomainHotplugAddVcpu(driver, cfg, vm, nextvcpu) < 0)
goto cleanup;
}
} else {
for (nextvcpu = virDomainDefGetVcpusMax(vm->def) - 1; nextvcpu >= 0; nextvcpu--) {
if (!virBitmapIsBitSet(vcpumap, nextvcpu))
continue;
if (qemuDomainHotplugDelVcpu(driver, cfg, vm, nextvcpu) < 0)
goto cleanup;
}
}
ret = 0;
cleanup:
qemuCgroupEmulatorAllNodesRestore(emulatorCgroup);
return ret;
}
/**
* qemuDomainSetVcpusConfig:
* @def: config/offline definition of a domain
* @nvcpus: target vcpu count
*
* Properly handle cold(un)plug of vcpus:
* - plug in inactive vcpus/uplug active rather than rewriting state
* - fix hotpluggable state
*/
static void
qemuDomainSetVcpusConfig(virDomainDefPtr def,
unsigned int nvcpus,
bool hotpluggable)
{
virDomainVcpuDefPtr vcpu;
size_t curvcpus = virDomainDefGetVcpus(def);
size_t maxvcpus = virDomainDefGetVcpusMax(def);
size_t i;
/* ordering information may become invalid, thus clear it */
virDomainDefVcpuOrderClear(def);
if (curvcpus == nvcpus)
return;
if (curvcpus < nvcpus) {
for (i = 0; i < maxvcpus; i++) {
vcpu = virDomainDefGetVcpu(def, i);
if (!vcpu)
continue;
if (vcpu->online) {
/* non-hotpluggable vcpus need to be clustered at the beggining,
* thus we need to force vcpus to be hotpluggable when we find
* vcpus that are hotpluggable and online prior to the ones
* we are going to add */
if (vcpu->hotpluggable == VIR_TRISTATE_BOOL_YES)
hotpluggable = true;
continue;
}
vcpu->online = true;
if (hotpluggable) {
vcpu->hotpluggable = VIR_TRISTATE_BOOL_YES;
def->individualvcpus = true;
} else {
vcpu->hotpluggable = VIR_TRISTATE_BOOL_NO;
}
if (++curvcpus == nvcpus)
break;
}
} else {
for (i = maxvcpus; i != 0; i--) {
vcpu = virDomainDefGetVcpu(def, i - 1);
if (!vcpu || !vcpu->online)
continue;
vcpu->online = false;
vcpu->hotpluggable = VIR_TRISTATE_BOOL_YES;
if (--curvcpus == nvcpus)
break;
}
}
}
int
qemuDomainSetVcpusInternal(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDefPtr def,
virDomainDefPtr persistentDef,
unsigned int nvcpus,
bool hotpluggable)
{
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
virBitmapPtr vcpumap = NULL;
bool enable;
int ret = -1;
if (def && nvcpus > virDomainDefGetVcpusMax(def)) {
virReportError(VIR_ERR_INVALID_ARG,
_("requested vcpus is greater than max allowable"
" vcpus for the live domain: %u > %u"),
nvcpus, virDomainDefGetVcpusMax(def));
goto cleanup;
}
if (persistentDef && nvcpus > virDomainDefGetVcpusMax(persistentDef)) {
virReportError(VIR_ERR_INVALID_ARG,
_("requested vcpus is greater than max allowable"
" vcpus for the persistent domain: %u > %u"),
nvcpus, virDomainDefGetVcpusMax(persistentDef));
goto cleanup;
}
if (def) {
if (!(vcpumap = qemuDomainSelectHotplugVcpuEntities(vm->def, nvcpus,
&enable)))
goto cleanup;
if (qemuDomainSetVcpusLive(driver, cfg, vm, vcpumap, enable) < 0)
goto cleanup;
}
if (persistentDef) {
qemuDomainSetVcpusConfig(persistentDef, nvcpus, hotpluggable);
if (virDomainSaveConfig(cfg->configDir, driver->caps, persistentDef) < 0)
goto cleanup;
}
ret = 0;
cleanup:
virBitmapFree(vcpumap);
virObjectUnref(cfg);
return ret;
}
static void
qemuDomainSetVcpuConfig(virDomainDefPtr def,
virBitmapPtr map,
bool state)
{
virDomainVcpuDefPtr vcpu;
ssize_t next = -1;
def->individualvcpus = true;
/* ordering information may become invalid, thus clear it */
virDomainDefVcpuOrderClear(def);
while ((next = virBitmapNextSetBit(map, next)) >= 0) {
if (!(vcpu = virDomainDefGetVcpu(def, next)))
continue;
vcpu->online = state;
vcpu->hotpluggable = VIR_TRISTATE_BOOL_YES;
}
}
/**
* qemuDomainFilterHotplugVcpuEntities:
*
* Returns a bitmap of hotpluggable vcpu entities that correspond to the logical
* vcpus requested in @vcpus.
*/
static virBitmapPtr
qemuDomainFilterHotplugVcpuEntities(virDomainDefPtr def,
virBitmapPtr vcpus,
bool state)
{
qemuDomainVcpuPrivatePtr vcpupriv;
virDomainVcpuDefPtr vcpu;
virBitmapPtr map = NULL;
virBitmapPtr ret = NULL;
ssize_t next = -1;
size_t i;
if (!(map = virBitmapNewCopy(vcpus)))
return NULL;
/* make sure that all selected vcpus are in the correct state */
while ((next = virBitmapNextSetBit(map, next)) >= 0) {
if (!(vcpu = virDomainDefGetVcpu(def, next)))
continue;
if (vcpu->online == state) {
virReportError(VIR_ERR_INVALID_ARG,
_("vcpu '%zd' is already in requested state"), next);
goto cleanup;
}
if (vcpu->online && !vcpu->hotpluggable) {
virReportError(VIR_ERR_INVALID_ARG,
_("vcpu '%zd' can't be hotunplugged"), next);
goto cleanup;
}
}
/* Make sure that all vCPUs belonging to a single hotpluggable entity were
* selected and then de-select any sub-threads of it. */
next = -1;
while ((next = virBitmapNextSetBit(map, next)) >= 0) {
if (!(vcpu = virDomainDefGetVcpu(def, next)))
continue;
vcpupriv = QEMU_DOMAIN_VCPU_PRIVATE(vcpu);
if (vcpupriv->vcpus == 0) {
virReportError(VIR_ERR_INVALID_ARG,
_("vcpu '%zd' belongs to a larger hotpluggable entity, "
"but siblings were not selected"), next);
goto cleanup;
}
for (i = next + 1; i < next + vcpupriv->vcpus; i++) {
if (!virBitmapIsBitSet(map, i)) {
virReportError(VIR_ERR_INVALID_ARG,
_("vcpu '%zu' was not selected but it belongs to "
"hotpluggable entity '%zd-%zd' which was "
"partially selected"),
i, next, next + vcpupriv->vcpus - 1);
goto cleanup;
}
/* clear the subthreads */
ignore_value(virBitmapClearBit(map, i));
}
}
VIR_STEAL_PTR(ret, map);
cleanup:
virBitmapFree(map);
return ret;
}
static int
qemuDomainVcpuValidateConfig(virDomainDefPtr def,
virBitmapPtr map)
{
virDomainVcpuDefPtr vcpu;
size_t maxvcpus = virDomainDefGetVcpusMax(def);
ssize_t next;
ssize_t firstvcpu = -1;
/* vcpu 0 can't be modified */
if (virBitmapIsBitSet(map, 0)) {
virReportError(VIR_ERR_INVALID_ARG, "%s",
_("vCPU '0' can't be modified"));
return -1;
}
/* non-hotpluggable vcpus need to stay clustered starting from vcpu 0 */
for (next = virBitmapNextSetBit(map, -1) + 1; next < maxvcpus; next++) {
if (!(vcpu = virDomainDefGetVcpu(def, next)))
continue;
/* skip vcpus being modified */
if (virBitmapIsBitSet(map, next)) {
if (firstvcpu < 0)
firstvcpu = next;
continue;
}
if (vcpu->online && vcpu->hotpluggable == VIR_TRISTATE_BOOL_NO) {
virReportError(VIR_ERR_INVALID_ARG,
_("vcpu '%zd' can't be modified as it is followed "
"by non-hotpluggable online vcpus"), firstvcpu);
return -1;
}
}
return 0;
}
int
qemuDomainSetVcpuInternal(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDefPtr def,
virDomainDefPtr persistentDef,
virBitmapPtr map,
bool state)
{
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
virBitmapPtr livevcpus = NULL;
int ret = -1;
if (def) {
if (!qemuDomainSupportsNewVcpuHotplug(vm)) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
_("this qemu version does not support specific "
"vCPU hotplug"));
goto cleanup;
}
if (!(livevcpus = qemuDomainFilterHotplugVcpuEntities(def, map, state)))
goto cleanup;
/* Make sure that only one hotpluggable entity is selected.
* qemuDomainSetVcpusLive allows setting more at once but error
* resolution in case of a partial failure is hard, so don't let users
* do so */
if (virBitmapCountBits(livevcpus) != 1) {
virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
_("only one hotpluggable entity can be selected"));
goto cleanup;
}
}
if (persistentDef) {
if (qemuDomainVcpuValidateConfig(persistentDef, map) < 0)
goto cleanup;
}
if (livevcpus &&
qemuDomainSetVcpusLive(driver, cfg, vm, livevcpus, state) < 0)
goto cleanup;
if (persistentDef) {
qemuDomainSetVcpuConfig(persistentDef, map, state);
if (virDomainSaveConfig(cfg->configDir, driver->caps, persistentDef) < 0)
goto cleanup;
}
ret = 0;
cleanup:
virBitmapFree(livevcpus);
virObjectUnref(cfg);
return ret;
}
int
qemuDomainDetachInputDevice(virDomainObjPtr vm,
virDomainInputDefPtr def,
bool async)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
virQEMUDriverPtr driver = priv->driver;
virDomainInputDefPtr input;
int ret = -1;
int idx;
if ((idx = virDomainInputDefFind(vm->def, def)) < 0) {
virReportError(VIR_ERR_OPERATION_FAILED, "%s",
_("matching input device not found"));
return -1;
}
input = vm->def->inputs[idx];
switch ((virDomainInputBus) input->bus) {
case VIR_DOMAIN_INPUT_BUS_PS2:
case VIR_DOMAIN_INPUT_BUS_XEN:
case VIR_DOMAIN_INPUT_BUS_PARALLELS:
virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
_("input device on bus '%s' cannot be detached"),
virDomainInputBusTypeToString(input->bus));
return -1;
case VIR_DOMAIN_INPUT_BUS_LAST:
case VIR_DOMAIN_INPUT_BUS_USB:
case VIR_DOMAIN_INPUT_BUS_VIRTIO:
break;
}
if (!async)
qemuDomainMarkDeviceForRemoval(vm, &input->info);
qemuDomainObjEnterMonitor(driver, vm);
if (qemuMonitorDelDevice(priv->mon, input->info.alias)) {
ignore_value(qemuDomainObjExitMonitor(driver, vm));
goto cleanup;
}
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
if (async) {
ret = 0;
} else {
if ((ret = qemuDomainWaitForDeviceRemoval(vm)) == 1)
ret = qemuDomainRemoveInputDevice(vm, input);
}
cleanup:
if (!async)
qemuDomainResetDeviceRemoval(vm);
return ret;
}
int
qemuDomainDetachVsockDevice(virDomainObjPtr vm,
virDomainVsockDefPtr dev,
bool async)
{
qemuDomainObjPrivatePtr priv = vm->privateData;
virQEMUDriverPtr driver = priv->driver;
virDomainVsockDefPtr vsock = vm->def->vsock;
int ret = -1;
if (!vsock ||
!virDomainVsockDefEquals(dev, vsock)) {
virReportError(VIR_ERR_OPERATION_FAILED, "%s",
_("matching vsock device not found"));
return -1;
}
if (!async)
qemuDomainMarkDeviceForRemoval(vm, &vsock->info);
qemuDomainObjEnterMonitor(driver, vm);
if (qemuMonitorDelDevice(priv->mon, vsock->info.alias)) {
ignore_value(qemuDomainObjExitMonitor(driver, vm));
goto cleanup;
}
if (qemuDomainObjExitMonitor(driver, vm) < 0)
goto cleanup;
if (async) {
ret = 0;
} else {
if ((ret = qemuDomainWaitForDeviceRemoval(vm)) == 1)
ret = qemuDomainRemoveVsockDevice(vm, vsock);
}
cleanup:
if (!async)
qemuDomainResetDeviceRemoval(vm);
return ret;
}