/*
* virpci.c: helper APIs for managing host PCI devices
*
* Copyright (C) 2009-2014 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library. If not, see
* .
*
* Authors:
* Mark McLoughlin
*/
#include
#include "virpci.h"
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include "dirname.h"
#include "virlog.h"
#include "viralloc.h"
#include "vircommand.h"
#include "virerror.h"
#include "virfile.h"
#include "virkmod.h"
#include "virstring.h"
#include "virutil.h"
VIR_LOG_INIT("util.pci");
#define PCI_SYSFS "/sys/bus/pci/"
#define PCI_ID_LEN 10 /* "XXXX XXXX" */
#define PCI_ADDR_LEN 13 /* "XXXX:XX:XX.X" */
VIR_ENUM_IMPL(virPCIELinkSpeed, VIR_PCIE_LINK_SPEED_LAST,
"", "2.5", "5", "8")
struct _virPCIDevice {
unsigned int domain;
unsigned int bus;
unsigned int slot;
unsigned int function;
char name[PCI_ADDR_LEN]; /* domain:bus:slot.function */
char id[PCI_ID_LEN]; /* product vendor */
char *path;
/* The driver:domain which uses the device */
char *used_by_drvname;
char *used_by_domname;
unsigned int pcie_cap_pos;
unsigned int pci_pm_cap_pos;
bool has_flr;
bool has_pm_reset;
bool managed;
char *stubDriver;
/* used by reattach function */
bool unbind_from_stub;
bool remove_slot;
bool reprobe;
};
struct _virPCIDeviceList {
virObjectLockable parent;
size_t count;
virPCIDevicePtr *devs;
};
/* For virReportOOMError() and virReportSystemError() */
#define VIR_FROM_THIS VIR_FROM_NONE
/* Specifications referenced in comments:
* PCI30 - PCI Local Bus Specification 3.0
* PCIe20 - PCI Express Base Specification 2.0
* BR12 - PCI-to-PCI Bridge Architecture Specification 1.2
* PM12 - PCI Bus Power Management Interface Specification 1.2
* ECN_AF - Advanced Capabilities for Conventional PCI ECN
*/
/* Type 0 config space header length; PCI30 Section 6.1 Configuration Space Organization */
#define PCI_CONF_LEN 0x100
#define PCI_CONF_HEADER_LEN 0x40
/* PCI30 6.2.1 */
#define PCI_HEADER_TYPE 0x0e /* Header type */
#define PCI_HEADER_TYPE_BRIDGE 0x1
#define PCI_HEADER_TYPE_MASK 0x7f
#define PCI_HEADER_TYPE_MULTI 0x80
/* PCI30 6.2.1 Device Identification */
#define PCI_CLASS_DEVICE 0x0a /* Device class */
/* Class Code for bridge; PCI30 D.7 Base Class 06h */
#define PCI_CLASS_BRIDGE_PCI 0x0604
/* PCI30 6.2.3 Device Status */
#define PCI_STATUS 0x06 /* 16 bits */
#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */
/* PCI30 6.7 Capabilities List */
#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */
#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */
/* PM12 3.2.1 Capability Identifier */
#define PCI_CAP_ID_PM 0x01 /* Power Management */
/* PCI30 H Capability IDs */
#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
/* ECN_AF 6.x.1.1 Capability ID for AF */
#define PCI_CAP_ID_AF 0x13 /* Advanced Features */
/* PCIe20 7.8.3 Device Capabilities Register (Offset 04h) */
#define PCI_EXP_DEVCAP 0x4 /* Device capabilities */
#define PCI_EXP_DEVCAP_FLR (1<<28) /* Function Level Reset */
#define PCI_EXP_LNKCAP 0xc /* Link Capabilities */
#define PCI_EXP_LNKCAP_SPEED 0x0000f /* Maximum Link Speed */
#define PCI_EXP_LNKCAP_WIDTH 0x003f0 /* Maximum Link Width */
#define PCI_EXP_LNKSTA 0x12 /* Link Status */
#define PCI_EXP_LNKSTA_SPEED 0x000f /* Negotiated Link Speed */
#define PCI_EXP_LNKSTA_WIDTH 0x03f0 /* Negotiated Link Width */
/* Header type 1 BR12 3.2 PCI-to-PCI Bridge Configuration Space Header Format */
#define PCI_PRIMARY_BUS 0x18 /* BR12 3.2.5.2 Primary bus number */
#define PCI_SECONDARY_BUS 0x19 /* BR12 3.2.5.3 Secondary bus number */
#define PCI_SUBORDINATE_BUS 0x1a /* BR12 3.2.5.4 Highest bus number behind the bridge */
#define PCI_BRIDGE_CONTROL 0x3e
/* BR12 3.2.5.18 Bridge Control Register */
#define PCI_BRIDGE_CTL_RESET 0x40 /* Secondary bus reset */
/* PM12 3.2.4 Power Management Control/Status (Offset = 4) */
#define PCI_PM_CTRL 4 /* PM control and status register */
#define PCI_PM_CTRL_STATE_MASK 0x3 /* Current power state (D0 to D3) */
#define PCI_PM_CTRL_STATE_D0 0x0 /* D0 state */
#define PCI_PM_CTRL_STATE_D3hot 0x3 /* D3 state */
#define PCI_PM_CTRL_NO_SOFT_RESET 0x8 /* No reset for D3hot->D0 */
/* ECN_AF 6.x.1 Advanced Features Capability Structure */
#define PCI_AF_CAP 0x3 /* Advanced features capabilities */
#define PCI_AF_CAP_FLR 0x2 /* Function Level Reset */
#define PCI_EXP_FLAGS 0x2
#define PCI_EXP_FLAGS_TYPE 0x00f0
#define PCI_EXP_TYPE_DOWNSTREAM 0x6
#define PCI_EXT_CAP_BASE 0x100
#define PCI_EXT_CAP_LIMIT 0x1000
#define PCI_EXT_CAP_ID_MASK 0x0000ffff
#define PCI_EXT_CAP_OFFSET_SHIFT 20
#define PCI_EXT_CAP_OFFSET_MASK 0x00000ffc
#define PCI_EXT_CAP_ID_ACS 0x000d
#define PCI_EXT_ACS_CTRL 0x06
#define PCI_EXT_CAP_ACS_SV 0x01
#define PCI_EXT_CAP_ACS_RR 0x04
#define PCI_EXT_CAP_ACS_CR 0x08
#define PCI_EXT_CAP_ACS_UF 0x10
#define PCI_EXT_CAP_ACS_ENABLED (PCI_EXT_CAP_ACS_SV | \
PCI_EXT_CAP_ACS_RR | \
PCI_EXT_CAP_ACS_CR | \
PCI_EXT_CAP_ACS_UF)
#define PCI_EXP_TYPE_ROOT_INT_EP 0x9 /* Root Complex Integrated Endpoint */
#define PCI_EXP_TYPE_ROOT_EC 0xa /* Root Complex Event Collector */
static virClassPtr virPCIDeviceListClass;
static void virPCIDeviceListDispose(void *obj);
static int virPCIOnceInit(void)
{
if (!(virPCIDeviceListClass = virClassNew(virClassForObjectLockable(),
"virPCIDeviceList",
sizeof(virPCIDeviceList),
virPCIDeviceListDispose)))
return -1;
return 0;
}
VIR_ONCE_GLOBAL_INIT(virPCI)
static char *
virPCIDriverDir(const char *driver)
{
char *buffer;
ignore_value(virAsprintf(&buffer, PCI_SYSFS "drivers/%s", driver));
return buffer;
}
static char *
virPCIDriverFile(const char *driver, const char *file)
{
char *buffer;
ignore_value(virAsprintf(&buffer, PCI_SYSFS "drivers/%s/%s", driver, file));
return buffer;
}
static char *
virPCIFile(const char *device, const char *file)
{
char *buffer;
ignore_value(virAsprintf(&buffer, PCI_SYSFS "devices/%s/%s", device, file));
return buffer;
}
/* virPCIDeviceGetDriverPathAndName - put the path to the driver
* directory of the driver in use for this device in @path and the
* name of the driver in @name. Both could be NULL if it's not bound
* to any driver.
*
* Return 0 for success, -1 for error.
*/
int
virPCIDeviceGetDriverPathAndName(virPCIDevicePtr dev, char **path, char **name)
{
int ret = -1;
char *drvlink = NULL;
*path = *name = NULL;
/* drvlink = "/sys/bus/pci/dddd:bb:ss.ff/driver" */
if (!(drvlink = virPCIFile(dev->name, "driver")))
goto cleanup;
if (!virFileExists(drvlink)) {
ret = 0;
goto cleanup;
}
if (virFileIsLink(drvlink) != 1) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Invalid device %s driver file %s is not a symlink"),
dev->name, drvlink);
goto cleanup;
}
if (virFileResolveLink(drvlink, path) < 0) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Unable to resolve device %s driver symlink %s"),
dev->name, drvlink);
goto cleanup;
}
/* path = "/sys/bus/pci/drivers/${drivername}" */
if (VIR_STRDUP(*name, last_component(*path)) < 0)
goto cleanup;
/* name = "${drivername}" */
ret = 0;
cleanup:
VIR_FREE(drvlink);
if (ret < 0) {
VIR_FREE(*path);
VIR_FREE(*name);
}
return ret;
}
static int
virPCIDeviceConfigOpen(virPCIDevicePtr dev, bool fatal)
{
int fd;
fd = open(dev->path, O_RDWR);
if (fd < 0) {
if (fatal) {
virReportSystemError(errno,
_("Failed to open config space file '%s'"),
dev->path);
} else {
char ebuf[1024];
VIR_WARN("Failed to open config space file '%s': %s",
dev->path, virStrerror(errno, ebuf, sizeof(ebuf)));
}
return -1;
}
VIR_DEBUG("%s %s: opened %s", dev->id, dev->name, dev->path);
return fd;
}
static void
virPCIDeviceConfigClose(virPCIDevicePtr dev, int cfgfd)
{
if (VIR_CLOSE(cfgfd) < 0) {
char ebuf[1024];
VIR_WARN("Failed to close config space file '%s': %s",
dev->path, virStrerror(errno, ebuf, sizeof(ebuf)));
}
}
static int
virPCIDeviceRead(virPCIDevicePtr dev,
int cfgfd,
unsigned int pos,
uint8_t *buf,
unsigned int buflen)
{
memset(buf, 0, buflen);
if (lseek(cfgfd, pos, SEEK_SET) != pos ||
saferead(cfgfd, buf, buflen) != buflen) {
char ebuf[1024];
VIR_WARN("Failed to read from '%s' : %s", dev->path,
virStrerror(errno, ebuf, sizeof(ebuf)));
return -1;
}
return 0;
}
static uint8_t
virPCIDeviceRead8(virPCIDevicePtr dev, int cfgfd, unsigned int pos)
{
uint8_t buf;
virPCIDeviceRead(dev, cfgfd, pos, &buf, sizeof(buf));
return buf;
}
static uint16_t
virPCIDeviceRead16(virPCIDevicePtr dev, int cfgfd, unsigned int pos)
{
uint8_t buf[2];
virPCIDeviceRead(dev, cfgfd, pos, &buf[0], sizeof(buf));
return (buf[0] << 0) | (buf[1] << 8);
}
static uint32_t
virPCIDeviceRead32(virPCIDevicePtr dev, int cfgfd, unsigned int pos)
{
uint8_t buf[4];
virPCIDeviceRead(dev, cfgfd, pos, &buf[0], sizeof(buf));
return (buf[0] << 0) | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
}
static int
virPCIDeviceReadClass(virPCIDevicePtr dev, uint16_t *device_class)
{
char *path = NULL;
char *id_str = NULL;
int ret = -1;
unsigned int value;
if (!(path = virPCIFile(dev->name, "class")))
return ret;
/* class string is '0xNNNNNN\n' ... i.e. 9 bytes */
if (virFileReadAll(path, 9, &id_str) < 0)
goto cleanup;
id_str[8] = '\0';
if (virStrToLong_ui(id_str, NULL, 16, &value) < 0) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Unusual value in %s/devices/%s/class: %s"),
PCI_SYSFS, dev->name, id_str);
goto cleanup;
}
*device_class = (value >> 8) & 0xFFFF;
ret = 0;
cleanup:
VIR_FREE(id_str);
VIR_FREE(path);
return ret;
}
static int
virPCIDeviceWrite(virPCIDevicePtr dev,
int cfgfd,
unsigned int pos,
uint8_t *buf,
unsigned int buflen)
{
if (lseek(cfgfd, pos, SEEK_SET) != pos ||
safewrite(cfgfd, buf, buflen) != buflen) {
char ebuf[1024];
VIR_WARN("Failed to write to '%s' : %s", dev->path,
virStrerror(errno, ebuf, sizeof(ebuf)));
return -1;
}
return 0;
}
static void
virPCIDeviceWrite16(virPCIDevicePtr dev, int cfgfd, unsigned int pos, uint16_t val)
{
uint8_t buf[2] = { (val >> 0), (val >> 8) };
virPCIDeviceWrite(dev, cfgfd, pos, &buf[0], sizeof(buf));
}
static void
virPCIDeviceWrite32(virPCIDevicePtr dev, int cfgfd, unsigned int pos, uint32_t val)
{
uint8_t buf[4] = { (val >> 0), (val >> 8), (val >> 16), (val >> 24) };
virPCIDeviceWrite(dev, cfgfd, pos, &buf[0], sizeof(buf));
}
typedef int (*virPCIDeviceIterPredicate)(virPCIDevicePtr, virPCIDevicePtr,
void *);
/* Iterate over available PCI devices calling @predicate
* to compare each one to @dev.
* Return -1 on error since we don't want to assume it is
* safe to reset if there is an error.
*/
static int
virPCIDeviceIterDevices(virPCIDeviceIterPredicate predicate,
virPCIDevicePtr dev,
virPCIDevicePtr *matched,
void *data)
{
DIR *dir;
struct dirent *entry;
int ret = 0;
int rc;
*matched = NULL;
VIR_DEBUG("%s %s: iterating over " PCI_SYSFS "devices", dev->id, dev->name);
dir = opendir(PCI_SYSFS "devices");
if (!dir) {
VIR_WARN("Failed to open " PCI_SYSFS "devices");
return -1;
}
while ((ret = virDirRead(dir, &entry, PCI_SYSFS "devices")) > 0) {
unsigned int domain, bus, slot, function;
virPCIDevicePtr check;
char *tmp;
/* Ignore '.' and '..' */
if (entry->d_name[0] == '.')
continue;
/* expected format: ::. */
if (/* domain */
virStrToLong_ui(entry->d_name, &tmp, 16, &domain) < 0 || *tmp != ':' ||
/* bus */
virStrToLong_ui(tmp + 1, &tmp, 16, &bus) < 0 || *tmp != ':' ||
/* slot */
virStrToLong_ui(tmp + 1, &tmp, 16, &slot) < 0 || *tmp != '.' ||
/* function */
virStrToLong_ui(tmp + 1, NULL, 16, &function) < 0) {
VIR_WARN("Unusual entry in " PCI_SYSFS "devices: %s", entry->d_name);
continue;
}
check = virPCIDeviceNew(domain, bus, slot, function);
if (!check) {
ret = -1;
break;
}
rc = predicate(dev, check, data);
if (rc < 0) {
/* the predicate returned an error, bail */
virPCIDeviceFree(check);
ret = -1;
break;
} else if (rc == 1) {
VIR_DEBUG("%s %s: iter matched on %s", dev->id, dev->name, check->name);
*matched = check;
ret = 1;
break;
}
virPCIDeviceFree(check);
}
closedir(dir);
return ret;
}
static uint8_t
virPCIDeviceFindCapabilityOffset(virPCIDevicePtr dev,
int cfgfd,
unsigned int capability)
{
uint16_t status;
uint8_t pos;
status = virPCIDeviceRead16(dev, cfgfd, PCI_STATUS);
if (!(status & PCI_STATUS_CAP_LIST))
return 0;
pos = virPCIDeviceRead8(dev, cfgfd, PCI_CAPABILITY_LIST);
/* Zero indicates last capability, capabilities can't
* be in the config space header and 0xff is returned
* by the kernel if we don't have access to this region
*
* Note: we're not handling loops or extended
* capabilities here.
*/
while (pos >= PCI_CONF_HEADER_LEN && pos != 0xff) {
uint8_t capid = virPCIDeviceRead8(dev, cfgfd, pos);
if (capid == capability) {
VIR_DEBUG("%s %s: found cap 0x%.2x at 0x%.2x",
dev->id, dev->name, capability, pos);
return pos;
}
pos = virPCIDeviceRead8(dev, cfgfd, pos + 1);
}
VIR_DEBUG("%s %s: failed to find cap 0x%.2x", dev->id, dev->name, capability);
return 0;
}
static unsigned int
virPCIDeviceFindExtendedCapabilityOffset(virPCIDevicePtr dev,
int cfgfd,
unsigned int capability)
{
int ttl;
unsigned int pos;
uint32_t header;
/* minimum 8 bytes per capability */
ttl = (PCI_EXT_CAP_LIMIT - PCI_EXT_CAP_BASE) / 8;
pos = PCI_EXT_CAP_BASE;
while (ttl > 0 && pos >= PCI_EXT_CAP_BASE) {
header = virPCIDeviceRead32(dev, cfgfd, pos);
if ((header & PCI_EXT_CAP_ID_MASK) == capability)
return pos;
pos = (header >> PCI_EXT_CAP_OFFSET_SHIFT) & PCI_EXT_CAP_OFFSET_MASK;
ttl--;
}
return 0;
}
/* detects whether this device has FLR. Returns 0 if the device does
* not have FLR, 1 if it does, and -1 on error
*/
static int
virPCIDeviceDetectFunctionLevelReset(virPCIDevicePtr dev, int cfgfd)
{
uint32_t caps;
uint8_t pos;
char *path;
int found;
/* The PCIe Function Level Reset capability allows
* individual device functions to be reset without
* affecting any other functions on the device or
* any other devices on the bus. This is only common
* on SR-IOV NICs at the moment.
*/
if (dev->pcie_cap_pos) {
caps = virPCIDeviceRead32(dev, cfgfd, dev->pcie_cap_pos + PCI_EXP_DEVCAP);
if (caps & PCI_EXP_DEVCAP_FLR) {
VIR_DEBUG("%s %s: detected PCIe FLR capability", dev->id, dev->name);
return 1;
}
}
/* The PCI AF Function Level Reset capability is
* the same thing, except for conventional PCI
* devices. This is not common yet.
*/
pos = virPCIDeviceFindCapabilityOffset(dev, cfgfd, PCI_CAP_ID_AF);
if (pos) {
caps = virPCIDeviceRead16(dev, cfgfd, pos + PCI_AF_CAP);
if (caps & PCI_AF_CAP_FLR) {
VIR_DEBUG("%s %s: detected PCI FLR capability", dev->id, dev->name);
return 1;
}
}
/* there are some buggy devices that do support FLR, but forget to
* advertise that fact in their capabilities. However, FLR is *required*
* to be present for virtual functions (VFs), so if we see that this
* device is a VF, we just assume FLR works
*/
if (virAsprintf(&path, PCI_SYSFS "devices/%s/physfn", dev->name) < 0)
return -1;
found = virFileExists(path);
VIR_FREE(path);
if (found) {
VIR_DEBUG("%s %s: buggy device didn't advertise FLR, but is a VF; forcing flr on",
dev->id, dev->name);
return 1;
}
VIR_DEBUG("%s %s: no FLR capability found", dev->id, dev->name);
return 0;
}
/* Require the device has the PCI Power Management capability
* and that a D3hot->D0 transition will results in a full
* internal reset, not just a soft reset.
*/
static unsigned int
virPCIDeviceDetectPowerManagementReset(virPCIDevicePtr dev, int cfgfd)
{
if (dev->pci_pm_cap_pos) {
uint32_t ctl;
/* require the NO_SOFT_RESET bit is clear */
ctl = virPCIDeviceRead32(dev, cfgfd, dev->pci_pm_cap_pos + PCI_PM_CTRL);
if (!(ctl & PCI_PM_CTRL_NO_SOFT_RESET)) {
VIR_DEBUG("%s %s: detected PM reset capability", dev->id, dev->name);
return 1;
}
}
VIR_DEBUG("%s %s: no PM reset capability found", dev->id, dev->name);
return 0;
}
/* Any active devices on the same domain/bus ? */
static int
virPCIDeviceSharesBusWithActive(virPCIDevicePtr dev, virPCIDevicePtr check, void *data)
{
virPCIDeviceList *inactiveDevs = data;
/* Different domain, different bus, or simply identical device */
if (dev->domain != check->domain ||
dev->bus != check->bus ||
(dev->slot == check->slot &&
dev->function == check->function))
return 0;
/* same bus, but inactive, i.e. about to be assigned to guest */
if (inactiveDevs && virPCIDeviceListFind(inactiveDevs, check))
return 0;
return 1;
}
static virPCIDevicePtr
virPCIDeviceBusContainsActiveDevices(virPCIDevicePtr dev,
virPCIDeviceList *inactiveDevs)
{
virPCIDevicePtr active = NULL;
if (virPCIDeviceIterDevices(virPCIDeviceSharesBusWithActive,
dev, &active, inactiveDevs) < 0)
return NULL;
return active;
}
/* Is @check the parent of @dev ? */
static int
virPCIDeviceIsParent(virPCIDevicePtr dev, virPCIDevicePtr check, void *data)
{
uint16_t device_class;
uint8_t header_type, secondary, subordinate;
virPCIDevicePtr *best = data;
int ret = 0;
int fd;
if (dev->domain != check->domain)
return 0;
if ((fd = virPCIDeviceConfigOpen(check, false)) < 0)
return 0;
/* Is it a bridge? */
ret = virPCIDeviceReadClass(check, &device_class);
if (ret < 0 || device_class != PCI_CLASS_BRIDGE_PCI)
goto cleanup;
/* Is it a plane? */
header_type = virPCIDeviceRead8(check, fd, PCI_HEADER_TYPE);
if ((header_type & PCI_HEADER_TYPE_MASK) != PCI_HEADER_TYPE_BRIDGE)
goto cleanup;
secondary = virPCIDeviceRead8(check, fd, PCI_SECONDARY_BUS);
subordinate = virPCIDeviceRead8(check, fd, PCI_SUBORDINATE_BUS);
VIR_DEBUG("%s %s: found parent device %s", dev->id, dev->name, check->name);
/* if the secondary bus exactly equals the device's bus, then we found
* the direct parent. No further work is necessary
*/
if (dev->bus == secondary) {
ret = 1;
goto cleanup;
}
/* otherwise, SRIOV allows VFs to be on different buses than their PFs.
* In this case, what we need to do is look for the "best" match; i.e.
* the most restrictive match that still satisfies all of the conditions.
*/
if (dev->bus > secondary && dev->bus <= subordinate) {
if (*best == NULL) {
*best = virPCIDeviceNew(check->domain, check->bus, check->slot,
check->function);
if (*best == NULL) {
ret = -1;
goto cleanup;
}
} else {
/* OK, we had already recorded a previous "best" match for the
* parent. See if the current device is more restrictive than the
* best, and if so, make it the new best
*/
int bestfd;
uint8_t best_secondary;
if ((bestfd = virPCIDeviceConfigOpen(*best, false)) < 0)
goto cleanup;
best_secondary = virPCIDeviceRead8(*best, bestfd, PCI_SECONDARY_BUS);
virPCIDeviceConfigClose(*best, bestfd);
if (secondary > best_secondary) {
virPCIDeviceFree(*best);
*best = virPCIDeviceNew(check->domain, check->bus, check->slot,
check->function);
if (*best == NULL) {
ret = -1;
goto cleanup;
}
}
}
}
cleanup:
virPCIDeviceConfigClose(check, fd);
return ret;
}
static int
virPCIDeviceGetParent(virPCIDevicePtr dev, virPCIDevicePtr *parent)
{
virPCIDevicePtr best = NULL;
int ret;
*parent = NULL;
ret = virPCIDeviceIterDevices(virPCIDeviceIsParent, dev, parent, &best);
if (ret == 1)
virPCIDeviceFree(best);
else if (ret == 0)
*parent = best;
return ret;
}
/* Secondary Bus Reset is our sledgehammer - it resets all
* devices behind a bus.
*/
static int
virPCIDeviceTrySecondaryBusReset(virPCIDevicePtr dev,
int cfgfd,
virPCIDeviceList *inactiveDevs)
{
virPCIDevicePtr parent, conflict;
uint8_t config_space[PCI_CONF_LEN];
uint16_t ctl;
int ret = -1;
int parentfd;
/* Refuse to do a secondary bus reset if there are other
* devices/functions behind the bus are used by the host
* or other guests.
*/
if ((conflict = virPCIDeviceBusContainsActiveDevices(dev, inactiveDevs))) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Active %s devices on bus with %s, not doing bus reset"),
conflict->name, dev->name);
virPCIDeviceFree(conflict);
return -1;
}
/* Find the parent bus */
if (virPCIDeviceGetParent(dev, &parent) < 0)
return -1;
if (!parent) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Failed to find parent device for %s"),
dev->name);
return -1;
}
if ((parentfd = virPCIDeviceConfigOpen(parent, true)) < 0)
goto out;
VIR_DEBUG("%s %s: doing a secondary bus reset", dev->id, dev->name);
/* Save and restore the device's config space; we only do this
* for the supplied device since we refuse to do a reset if there
* are multiple devices/functions
*/
if (virPCIDeviceRead(dev, cfgfd, 0, config_space, PCI_CONF_LEN) < 0) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Failed to read PCI config space for %s"),
dev->name);
goto out;
}
/* Read the control register, set the reset flag, wait 200ms,
* unset the reset flag and wait 200ms.
*/
ctl = virPCIDeviceRead16(dev, cfgfd, PCI_BRIDGE_CONTROL);
virPCIDeviceWrite16(parent, parentfd, PCI_BRIDGE_CONTROL,
ctl | PCI_BRIDGE_CTL_RESET);
usleep(200 * 1000); /* sleep 200ms */
virPCIDeviceWrite16(parent, parentfd, PCI_BRIDGE_CONTROL, ctl);
usleep(200 * 1000); /* sleep 200ms */
if (virPCIDeviceWrite(dev, cfgfd, 0, config_space, PCI_CONF_LEN) < 0) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Failed to restore PCI config space for %s"),
dev->name);
goto out;
}
ret = 0;
out:
virPCIDeviceConfigClose(parent, parentfd);
virPCIDeviceFree(parent);
return ret;
}
/* Power management reset attempts to reset a device using a
* D-state transition from D3hot to D0. Note, in detect_pm_reset()
* above we require the device supports a full internal reset.
*/
static int
virPCIDeviceTryPowerManagementReset(virPCIDevicePtr dev, int cfgfd)
{
uint8_t config_space[PCI_CONF_LEN];
uint32_t ctl;
if (!dev->pci_pm_cap_pos)
return -1;
/* Save and restore the device's config space. */
if (virPCIDeviceRead(dev, cfgfd, 0, &config_space[0], PCI_CONF_LEN) < 0) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Failed to read PCI config space for %s"),
dev->name);
return -1;
}
VIR_DEBUG("%s %s: doing a power management reset", dev->id, dev->name);
ctl = virPCIDeviceRead32(dev, cfgfd, dev->pci_pm_cap_pos + PCI_PM_CTRL);
ctl &= ~PCI_PM_CTRL_STATE_MASK;
virPCIDeviceWrite32(dev, cfgfd, dev->pci_pm_cap_pos + PCI_PM_CTRL,
ctl | PCI_PM_CTRL_STATE_D3hot);
usleep(10 * 1000); /* sleep 10ms */
virPCIDeviceWrite32(dev, cfgfd, dev->pci_pm_cap_pos + PCI_PM_CTRL,
ctl | PCI_PM_CTRL_STATE_D0);
usleep(10 * 1000); /* sleep 10ms */
if (virPCIDeviceWrite(dev, cfgfd, 0, &config_space[0], PCI_CONF_LEN) < 0) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Failed to restore PCI config space for %s"),
dev->name);
return -1;
}
return 0;
}
static int
virPCIDeviceInit(virPCIDevicePtr dev, int cfgfd)
{
int flr;
dev->pcie_cap_pos = virPCIDeviceFindCapabilityOffset(dev, cfgfd, PCI_CAP_ID_EXP);
dev->pci_pm_cap_pos = virPCIDeviceFindCapabilityOffset(dev, cfgfd, PCI_CAP_ID_PM);
flr = virPCIDeviceDetectFunctionLevelReset(dev, cfgfd);
if (flr < 0)
return flr;
dev->has_flr = !!flr;
dev->has_pm_reset = !!virPCIDeviceDetectPowerManagementReset(dev, cfgfd);
return 0;
}
int
virPCIDeviceReset(virPCIDevicePtr dev,
virPCIDeviceList *activeDevs,
virPCIDeviceList *inactiveDevs)
{
char *drvPath = NULL;
char *drvName = NULL;
int ret = -1;
int fd = -1;
if (activeDevs && virPCIDeviceListFind(activeDevs, dev)) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Not resetting active device %s"), dev->name);
return -1;
}
/* If the device is currently bound to vfio-pci, ignore all
* requests to reset it, since the vfio-pci driver will always
* reset it whenever appropriate, so doing it ourselves would just
* be redundant.
*/
if (virPCIDeviceGetDriverPathAndName(dev, &drvPath, &drvName) < 0)
goto cleanup;
if (STREQ_NULLABLE(drvName, "vfio-pci")) {
VIR_DEBUG("Device %s is bound to vfio-pci - skip reset",
dev->name);
ret = 0;
goto cleanup;
}
VIR_DEBUG("Resetting device %s", dev->name);
if ((fd = virPCIDeviceConfigOpen(dev, true)) < 0)
goto cleanup;
if (virPCIDeviceInit(dev, fd) < 0)
goto cleanup;
/* KVM will perform FLR when starting and stopping
* a guest, so there is no need for us to do it here.
*/
if (dev->has_flr) {
ret = 0;
goto cleanup;
}
/* If the device supports PCI power management reset,
* that's the next best thing because it only resets
* the function, not the whole device.
*/
if (dev->has_pm_reset)
ret = virPCIDeviceTryPowerManagementReset(dev, fd);
/* Bus reset is not an option with the root bus */
if (ret < 0 && dev->bus != 0)
ret = virPCIDeviceTrySecondaryBusReset(dev, fd, inactiveDevs);
if (ret < 0) {
virErrorPtr err = virGetLastError();
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Unable to reset PCI device %s: %s"),
dev->name,
err ? err->message :
_("no FLR, PM reset or bus reset available"));
}
cleanup:
VIR_FREE(drvPath);
VIR_FREE(drvName);
virPCIDeviceConfigClose(dev, fd);
return ret;
}
static int
virPCIProbeStubDriver(const char *driver)
{
char *drvpath = NULL;
bool probed = false;
recheck:
if ((drvpath = virPCIDriverDir(driver)) && virFileExists(drvpath)) {
/* driver already loaded, return */
VIR_FREE(drvpath);
return 0;
}
VIR_FREE(drvpath);
if (!probed) {
char *errbuf = NULL;
probed = true;
if ((errbuf = virKModLoad(driver, true))) {
VIR_WARN("failed to load driver %s: %s", driver, errbuf);
VIR_FREE(errbuf);
goto cleanup;
}
goto recheck;
}
cleanup:
/* If we know failure was because of blacklist, let's report that;
* otherwise, report a more generic failure message
*/
if (virKModIsBlacklisted(driver)) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Failed to load PCI stub module %s: "
"administratively prohibited"),
driver);
} else {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Failed to load PCI stub module %s"),
driver);
}
return -1;
}
int
virPCIDeviceUnbind(virPCIDevicePtr dev, bool reprobe)
{
char *path = NULL;
char *drvpath = NULL;
char *driver = NULL;
int ret = -1;
if (virPCIDeviceGetDriverPathAndName(dev, &drvpath, &driver) < 0)
goto cleanup;
if (!driver) {
/* The device is not bound to any driver */
ret = 0;
goto cleanup;
}
if (!(path = virPCIFile(dev->name, "driver/unbind")))
goto cleanup;
if (virFileExists(path)) {
if (virFileWriteStr(path, dev->name, 0) < 0) {
virReportSystemError(errno,
_("Failed to unbind PCI device '%s' from %s"),
dev->name, driver);
goto cleanup;
}
dev->reprobe = reprobe;
}
ret = 0;
cleanup:
VIR_FREE(path);
VIR_FREE(drvpath);
VIR_FREE(driver);
return ret;
}
static const char *virPCIKnownStubs[] = {
"pciback", /* used by xen */
"pci-stub", /* used by kvm legacy passthrough */
"vfio-pci", /* used by VFIO device assignment */
NULL
};
static int
virPCIDeviceUnbindFromStub(virPCIDevicePtr dev)
{
int result = -1;
char *drvdir = NULL;
char *path = NULL;
char *driver = NULL;
const char **stubTest;
bool isStub = false;
/* If the device is currently bound to one of the "well known"
* stub drivers, then unbind it, otherwise ignore it.
*/
if (virPCIDeviceGetDriverPathAndName(dev, &drvdir, &driver) < 0)
goto cleanup;
if (!driver) {
/* The device is not bound to any driver and we are almost done. */
goto reprobe;
}
if (!dev->unbind_from_stub)
goto remove_slot;
/* If the device isn't bound to a known stub, skip the unbind. */
for (stubTest = virPCIKnownStubs; *stubTest != NULL; stubTest++) {
if (STREQ(driver, *stubTest)) {
isStub = true;
VIR_DEBUG("Found stub driver %s", *stubTest);
break;
}
}
if (!isStub)
goto remove_slot;
if (virPCIDeviceUnbind(dev, dev->reprobe) < 0)
goto cleanup;
dev->unbind_from_stub = false;
remove_slot:
if (!dev->remove_slot)
goto reprobe;
/* Xen's pciback.ko wants you to use remove_slot on the specific device */
if (!(path = virPCIDriverFile(driver, "remove_slot")))
goto cleanup;
if (virFileExists(path) && virFileWriteStr(path, dev->name, 0) < 0) {
virReportSystemError(errno,
_("Failed to remove slot for PCI device '%s' from %s"),
dev->name, driver);
goto cleanup;
}
dev->remove_slot = false;
reprobe:
if (!dev->reprobe) {
result = 0;
goto cleanup;
}
/* Trigger a re-probe of the device is not in the stub's dynamic
* ID table. If the stub is available, but 'remove_id' isn't
* available, then re-probing would just cause the device to be
* re-bound to the stub.
*/
VIR_FREE(path);
if (driver && !(path = virPCIDriverFile(driver, "remove_id")))
goto cleanup;
if (!driver || !virFileExists(drvdir) || virFileExists(path)) {
if (virFileWriteStr(PCI_SYSFS "drivers_probe", dev->name, 0) < 0) {
virReportSystemError(errno,
_("Failed to trigger a re-probe for PCI device '%s'"),
dev->name);
goto cleanup;
}
}
result = 0;
cleanup:
/* do not do it again */
dev->unbind_from_stub = false;
dev->remove_slot = false;
dev->reprobe = false;
VIR_FREE(drvdir);
VIR_FREE(path);
VIR_FREE(driver);
return result;
}
static int
virPCIDeviceBindToStub(virPCIDevicePtr dev,
const char *stubDriverName)
{
int result = -1;
bool reprobe = false;
char *stubDriverPath = NULL;
char *driverLink = NULL;
char *path = NULL; /* reused for different purposes */
char *newDriverName = NULL;
virErrorPtr err = NULL;
if (!(stubDriverPath = virPCIDriverDir(stubDriverName)) ||
!(driverLink = virPCIFile(dev->name, "driver")) ||
VIR_STRDUP(newDriverName, stubDriverName) < 0)
goto cleanup;
if (virFileExists(driverLink)) {
if (virFileLinkPointsTo(driverLink, stubDriverPath)) {
/* The device is already bound to the correct driver */
VIR_DEBUG("Device %s is already bound to %s",
dev->name, stubDriverName);
result = 0;
goto cleanup;
}
reprobe = true;
}
/* Add the PCI device ID to the stub's dynamic ID table;
* this is needed to allow us to bind the device to the stub.
* Note: if the device is not currently bound to any driver,
* stub will immediately be bound to the device. Also, note
* that if a new device with this ID is hotplugged, or if a probe
* is triggered for such a device, it will also be immediately
* bound by the stub.
*/
if (!(path = virPCIDriverFile(stubDriverName, "new_id")))
goto cleanup;
if (virFileWriteStr(path, dev->id, 0) < 0) {
virReportSystemError(errno,
_("Failed to add PCI device ID '%s' to %s"),
dev->id, stubDriverName);
goto cleanup;
}
/* check whether the device is bound to pci-stub when we write dev->id to
* ${stubDriver}/new_id.
*/
if (virFileLinkPointsTo(driverLink, stubDriverPath)) {
dev->unbind_from_stub = true;
dev->remove_slot = true;
result = 0;
goto remove_id;
}
if (virPCIDeviceUnbind(dev, reprobe) < 0)
goto remove_id;
/* If the device isn't already bound to pci-stub, try binding it now.
*/
if (!virFileLinkPointsTo(driverLink, stubDriverPath)) {
/* Xen's pciback.ko wants you to use new_slot first */
VIR_FREE(path);
if (!(path = virPCIDriverFile(stubDriverName, "new_slot")))
goto remove_id;
if (virFileExists(path) && virFileWriteStr(path, dev->name, 0) < 0) {
virReportSystemError(errno,
_("Failed to add slot for "
"PCI device '%s' to %s"),
dev->name, stubDriverName);
goto remove_id;
}
dev->remove_slot = true;
VIR_FREE(path);
if (!(path = virPCIDriverFile(stubDriverName, "bind")))
goto remove_id;
if (virFileWriteStr(path, dev->name, 0) < 0) {
virReportSystemError(errno,
_("Failed to bind PCI device '%s' to %s"),
dev->name, stubDriverName);
goto remove_id;
}
dev->unbind_from_stub = true;
}
result = 0;
remove_id:
err = virSaveLastError();
/* If 'remove_id' exists, remove the device id from pci-stub's dynamic
* ID table so that 'drivers_probe' works below.
*/
VIR_FREE(path);
if (!(path = virPCIDriverFile(stubDriverName, "remove_id"))) {
/* We do not remove PCI ID from pci-stub, and we cannot reprobe it */
if (dev->reprobe) {
VIR_WARN("Could not remove PCI ID '%s' from %s, and the device "
"cannot be probed again.", dev->id, stubDriverName);
}
dev->reprobe = false;
result = -1;
goto cleanup;
}
if (virFileExists(path) && virFileWriteStr(path, dev->id, 0) < 0) {
virReportSystemError(errno,
_("Failed to remove PCI ID '%s' from %s"),
dev->id, stubDriverName);
/* remove PCI ID from pci-stub failed, and we cannot reprobe it */
if (dev->reprobe) {
VIR_WARN("Failed to remove PCI ID '%s' from %s, and the device "
"cannot be probed again.", dev->id, stubDriverName);
}
dev->reprobe = false;
result = -1;
goto cleanup;
}
cleanup:
VIR_FREE(stubDriverPath);
VIR_FREE(driverLink);
VIR_FREE(path);
if (result < 0) {
VIR_FREE(newDriverName);
virPCIDeviceUnbindFromStub(dev);
} else {
VIR_FREE(dev->stubDriver);
dev->stubDriver = newDriverName;
}
if (err)
virSetError(err);
virFreeError(err);
return result;
}
/* virPCIDeviceDetach:
*
* Detach this device from the host driver, attach it to the stub
* driver (previously set with virPCIDeviceSetStubDriver(), and add *a
* copy* of the object to the inactiveDevs list (if provided). This
* function will *never* consume dev, so the caller should free it.
*
* Returns 0 on success, -1 on failure (will fail if the device is
* already in the activeDevs list, but will be a NOP if the device is
* already bound to the stub).
*
* GENERAL NOTE: activeDevs should be a list of all PCI devices
* currently in use by a domain. inactiveDevs is a list of all PCI
* devices that libvirt has detached from the host driver + attached
* to the stub driver, but hasn't yet assigned to a domain. Any device
* that is still attached to its host driver should not be on either
* list.
*/
int
virPCIDeviceDetach(virPCIDevicePtr dev,
virPCIDeviceList *activeDevs,
virPCIDeviceList *inactiveDevs)
{
sa_assert(dev->stubDriver);
if (virPCIProbeStubDriver(dev->stubDriver) < 0)
return -1;
if (activeDevs && virPCIDeviceListFind(activeDevs, dev)) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Not detaching active device %s"), dev->name);
return -1;
}
if (virPCIDeviceBindToStub(dev, dev->stubDriver) < 0)
return -1;
/* Add *a copy of* the dev into list inactiveDevs, if
* it's not already there.
*/
if (inactiveDevs && !virPCIDeviceListFind(inactiveDevs, dev) &&
virPCIDeviceListAddCopy(inactiveDevs, dev) < 0) {
return -1;
}
return 0;
}
int
virPCIDeviceReattach(virPCIDevicePtr dev,
virPCIDeviceListPtr activeDevs,
virPCIDeviceListPtr inactiveDevs)
{
if (activeDevs && virPCIDeviceListFind(activeDevs, dev)) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Not reattaching active device %s"), dev->name);
return -1;
}
if (virPCIDeviceUnbindFromStub(dev) < 0)
return -1;
/* Steal the dev from list inactiveDevs */
if (inactiveDevs)
virPCIDeviceListDel(inactiveDevs, dev);
return 0;
}
/* Certain hypervisors (like qemu/kvm) map the PCI bar(s) on
* the host when doing device passthrough. This can lead to a race
* condition where the hypervisor is still cleaning up the device while
* libvirt is trying to re-attach it to the host device driver. To avoid
* this situation, we look through /proc/iomem, and if the hypervisor is
* still holding on to the bar (denoted by the string in the matcher
* variable), then we can wait around a bit for that to clear up.
*
* A typical /proc/iomem looks like this (snipped for brevity):
* 00010000-0008efff : System RAM
* 0008f000-0008ffff : reserved
* ...
* 00100000-cc9fcfff : System RAM
* 00200000-00483d3b : Kernel code
* 00483d3c-005c88df : Kernel data
* cc9fd000-ccc71fff : ACPI Non-volatile Storage
* ...
* d0200000-d02fffff : PCI Bus #05
* d0200000-d021ffff : 0000:05:00.0
* d0200000-d021ffff : e1000e
* d0220000-d023ffff : 0000:05:00.0
* d0220000-d023ffff : e1000e
* ...
* f0000000-f0003fff : 0000:00:1b.0
* f0000000-f0003fff : kvm_assigned_device
*
* Returns 0 if we are clear to continue, and 1 if the hypervisor is still
* holding on to the resource.
*/
int
virPCIDeviceWaitForCleanup(virPCIDevicePtr dev, const char *matcher)
{
FILE *fp;
char line[160];
char *tmp;
unsigned long long start, end;
unsigned int domain, bus, slot, function;
bool in_matching_device;
int ret;
size_t match_depth;
fp = fopen("/proc/iomem", "r");
if (!fp) {
/* If we failed to open iomem, we just basically ignore the error. The
* unbind might succeed anyway, and besides, it's very likely we have
* no way to report the error
*/
VIR_DEBUG("Failed to open /proc/iomem, trying to continue anyway");
return 0;
}
ret = 0;
in_matching_device = false;
match_depth = 0;
while (fgets(line, sizeof(line), fp) != 0) {
/* the logic here is a bit confusing. For each line, we look to
* see if it matches the domain:bus:slot.function we were given.
* If this line matches the DBSF, then any subsequent lines indented
* by 2 spaces are the PCI regions for this device. It's also
* possible that none of the PCI regions are currently mapped, in
* which case we have no indented regions. This code handles all
* of these situations
*/
if (in_matching_device && (strspn(line, " ") == (match_depth + 2))) {
/* expected format: - : */
if (/* start */
virStrToLong_ull(line, &tmp, 16, &start) < 0 || *tmp != '-' ||
/* end */
virStrToLong_ull(tmp + 1, &tmp, 16, &end) < 0 ||
(tmp = STRSKIP(tmp, " : ")) == NULL)
continue;
if (STRPREFIX(tmp, matcher)) {
ret = 1;
break;
}
} else {
in_matching_device = false;
/* expected format: - : ::. */
if (/* start */
virStrToLong_ull(line, &tmp, 16, &start) < 0 || *tmp != '-' ||
/* end */
virStrToLong_ull(tmp + 1, &tmp, 16, &end) < 0 ||
(tmp = STRSKIP(tmp, " : ")) == NULL ||
/* domain */
virStrToLong_ui(tmp, &tmp, 16, &domain) < 0 || *tmp != ':' ||
/* bus */
virStrToLong_ui(tmp + 1, &tmp, 16, &bus) < 0 || *tmp != ':' ||
/* slot */
virStrToLong_ui(tmp + 1, &tmp, 16, &slot) < 0 || *tmp != '.' ||
/* function */
virStrToLong_ui(tmp + 1, &tmp, 16, &function) < 0 || *tmp != '\n')
continue;
if (domain != dev->domain || bus != dev->bus || slot != dev->slot ||
function != dev->function)
continue;
in_matching_device = true;
match_depth = strspn(line, " ");
}
}
VIR_FORCE_FCLOSE(fp);
return ret;
}
static char *
virPCIDeviceReadID(virPCIDevicePtr dev, const char *id_name)
{
char *path = NULL;
char *id_str;
if (!(path = virPCIFile(dev->name, id_name)))
return NULL;
/* ID string is '0xNNNN\n' ... i.e. 7 bytes */
if (virFileReadAll(path, 7, &id_str) < 0) {
VIR_FREE(path);
return NULL;
}
VIR_FREE(path);
/* Check for 0x suffix */
if (id_str[0] != '0' || id_str[1] != 'x') {
VIR_FREE(id_str);
return NULL;
}
/* Chop off the newline; we know the string is 7 bytes */
id_str[6] = '\0';
return id_str;
}
int
virPCIGetAddrString(unsigned int domain,
unsigned int bus,
unsigned int slot,
unsigned int function,
char **pciConfigAddr)
{
virPCIDevicePtr dev = NULL;
int ret = -1;
dev = virPCIDeviceNew(domain, bus, slot, function);
if (dev != NULL) {
if (VIR_STRDUP(*pciConfigAddr, dev->name) < 0)
goto cleanup;
ret = 0;
}
cleanup:
virPCIDeviceFree(dev);
return ret;
}
virPCIDevicePtr
virPCIDeviceNew(unsigned int domain,
unsigned int bus,
unsigned int slot,
unsigned int function)
{
virPCIDevicePtr dev;
char *vendor = NULL;
char *product = NULL;
if (VIR_ALLOC(dev) < 0)
return NULL;
dev->domain = domain;
dev->bus = bus;
dev->slot = slot;
dev->function = function;
if (snprintf(dev->name, sizeof(dev->name), "%.4x:%.2x:%.2x.%.1x",
dev->domain, dev->bus, dev->slot,
dev->function) >= sizeof(dev->name)) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("dev->name buffer overflow: %.4x:%.2x:%.2x.%.1x"),
dev->domain, dev->bus, dev->slot, dev->function);
goto error;
}
if (virAsprintf(&dev->path, PCI_SYSFS "devices/%s/config",
dev->name) < 0)
goto error;
if (!virFileExists(dev->path)) {
virReportSystemError(errno,
_("Device %s not found: could not access %s"),
dev->name, dev->path);
goto error;
}
vendor = virPCIDeviceReadID(dev, "vendor");
product = virPCIDeviceReadID(dev, "device");
if (!vendor || !product) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Failed to read product/vendor ID for %s"),
dev->name);
goto error;
}
/* strings contain '0x' prefix */
if (snprintf(dev->id, sizeof(dev->id), "%s %s", &vendor[2],
&product[2]) >= sizeof(dev->id)) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("dev->id buffer overflow: %s %s"),
&vendor[2], &product[2]);
goto error;
}
VIR_DEBUG("%s %s: initialized", dev->id, dev->name);
cleanup:
VIR_FREE(product);
VIR_FREE(vendor);
return dev;
error:
virPCIDeviceFree(dev);
dev = NULL;
goto cleanup;
}
virPCIDevicePtr
virPCIDeviceCopy(virPCIDevicePtr dev)
{
virPCIDevicePtr copy;
if (VIR_ALLOC(copy) < 0)
return NULL;
/* shallow copy to take care of most attributes */
*copy = *dev;
copy->path = copy->stubDriver = NULL;
copy->used_by_drvname = copy->used_by_domname = NULL;
if (VIR_STRDUP(copy->path, dev->path) < 0 ||
VIR_STRDUP(copy->stubDriver, dev->stubDriver) < 0 ||
VIR_STRDUP(copy->used_by_drvname, dev->used_by_drvname) < 0 ||
VIR_STRDUP(copy->used_by_domname, dev->used_by_domname) < 0) {
goto error;
}
return copy;
error:
virPCIDeviceFree(copy);
return NULL;
}
void
virPCIDeviceFree(virPCIDevicePtr dev)
{
if (!dev)
return;
VIR_DEBUG("%s %s: freeing", dev->id, dev->name);
VIR_FREE(dev->path);
VIR_FREE(dev->stubDriver);
VIR_FREE(dev->used_by_drvname);
VIR_FREE(dev->used_by_domname);
VIR_FREE(dev);
}
/**
* virPCIDeviceGetAddress:
* @dev: device to get address from
*
* Take a PCI device on input and return its PCI address. The
* caller must free the returned value when no longer needed.
*
* Returns NULL on failure, the device address on success.
*/
virPCIDeviceAddressPtr
virPCIDeviceGetAddress(virPCIDevicePtr dev)
{
virPCIDeviceAddressPtr pciAddrPtr;
if (!dev || (VIR_ALLOC(pciAddrPtr) < 0))
return NULL;
pciAddrPtr->domain = dev->domain;
pciAddrPtr->bus = dev->bus;
pciAddrPtr->slot = dev->slot;
pciAddrPtr->function = dev->function;
return pciAddrPtr;
}
const char *
virPCIDeviceGetName(virPCIDevicePtr dev)
{
return dev->name;
}
void virPCIDeviceSetManaged(virPCIDevicePtr dev, bool managed)
{
dev->managed = managed;
}
unsigned int
virPCIDeviceGetManaged(virPCIDevicePtr dev)
{
return dev->managed;
}
int
virPCIDeviceSetStubDriver(virPCIDevicePtr dev, const char *driver)
{
VIR_FREE(dev->stubDriver);
return VIR_STRDUP(dev->stubDriver, driver);
}
const char *
virPCIDeviceGetStubDriver(virPCIDevicePtr dev)
{
return dev->stubDriver;
}
unsigned int
virPCIDeviceGetUnbindFromStub(virPCIDevicePtr dev)
{
return dev->unbind_from_stub;
}
void
virPCIDeviceSetUnbindFromStub(virPCIDevicePtr dev, bool unbind)
{
dev->unbind_from_stub = unbind;
}
unsigned int
virPCIDeviceGetRemoveSlot(virPCIDevicePtr dev)
{
return dev->remove_slot;
}
void
virPCIDeviceSetRemoveSlot(virPCIDevicePtr dev, bool remove_slot)
{
dev->remove_slot = remove_slot;
}
unsigned int
virPCIDeviceGetReprobe(virPCIDevicePtr dev)
{
return dev->reprobe;
}
void
virPCIDeviceSetReprobe(virPCIDevicePtr dev, bool reprobe)
{
dev->reprobe = reprobe;
}
int
virPCIDeviceSetUsedBy(virPCIDevicePtr dev,
const char *drv_name,
const char *dom_name)
{
VIR_FREE(dev->used_by_drvname);
VIR_FREE(dev->used_by_domname);
if (VIR_STRDUP(dev->used_by_drvname, drv_name) < 0)
return -1;
if (VIR_STRDUP(dev->used_by_domname, dom_name) < 0)
return -1;
return 0;
}
void
virPCIDeviceGetUsedBy(virPCIDevicePtr dev,
const char **drv_name,
const char **dom_name)
{
*drv_name = dev->used_by_drvname;
*dom_name = dev->used_by_domname;
}
void virPCIDeviceReattachInit(virPCIDevicePtr pci)
{
pci->unbind_from_stub = true;
pci->remove_slot = true;
pci->reprobe = true;
}
virPCIDeviceListPtr
virPCIDeviceListNew(void)
{
virPCIDeviceListPtr list;
if (virPCIInitialize() < 0)
return NULL;
if (!(list = virObjectLockableNew(virPCIDeviceListClass)))
return NULL;
return list;
}
static void
virPCIDeviceListDispose(void *obj)
{
virPCIDeviceListPtr list = obj;
size_t i;
for (i = 0; i < list->count; i++) {
virPCIDeviceFree(list->devs[i]);
list->devs[i] = NULL;
}
list->count = 0;
VIR_FREE(list->devs);
}
int
virPCIDeviceListAdd(virPCIDeviceListPtr list,
virPCIDevicePtr dev)
{
if (virPCIDeviceListFind(list, dev)) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Device %s is already in use"), dev->name);
return -1;
}
return VIR_APPEND_ELEMENT(list->devs, list->count, dev);
}
/* virPCIDeviceListAddCopy - add a *copy* of the device to this list */
int
virPCIDeviceListAddCopy(virPCIDeviceListPtr list, virPCIDevicePtr dev)
{
virPCIDevicePtr copy = virPCIDeviceCopy(dev);
if (!copy)
return -1;
if (virPCIDeviceListAdd(list, copy) < 0) {
virPCIDeviceFree(copy);
return -1;
}
return 0;
}
virPCIDevicePtr
virPCIDeviceListGet(virPCIDeviceListPtr list,
int idx)
{
if (idx >= list->count)
return NULL;
if (idx < 0)
return NULL;
return list->devs[idx];
}
size_t
virPCIDeviceListCount(virPCIDeviceListPtr list)
{
return list->count;
}
virPCIDevicePtr
virPCIDeviceListStealIndex(virPCIDeviceListPtr list,
int idx)
{
virPCIDevicePtr ret;
if (idx < 0 || idx >= list->count)
return NULL;
ret = list->devs[idx];
VIR_DELETE_ELEMENT(list->devs, idx, list->count);
return ret;
}
virPCIDevicePtr
virPCIDeviceListSteal(virPCIDeviceListPtr list,
virPCIDevicePtr dev)
{
return virPCIDeviceListStealIndex(list, virPCIDeviceListFindIndex(list, dev));
}
void
virPCIDeviceListDel(virPCIDeviceListPtr list,
virPCIDevicePtr dev)
{
virPCIDevicePtr ret = virPCIDeviceListSteal(list, dev);
virPCIDeviceFree(ret);
}
int
virPCIDeviceListFindIndex(virPCIDeviceListPtr list, virPCIDevicePtr dev)
{
size_t i;
for (i = 0; i < list->count; i++)
if (list->devs[i]->domain == dev->domain &&
list->devs[i]->bus == dev->bus &&
list->devs[i]->slot == dev->slot &&
list->devs[i]->function == dev->function)
return i;
return -1;
}
virPCIDevicePtr
virPCIDeviceListFindByIDs(virPCIDeviceListPtr list,
unsigned int domain,
unsigned int bus,
unsigned int slot,
unsigned int function)
{
size_t i;
for (i = 0; i < list->count; i++) {
if (list->devs[i]->domain == domain &&
list->devs[i]->bus == bus &&
list->devs[i]->slot == slot &&
list->devs[i]->function == function)
return list->devs[i];
}
return NULL;
}
virPCIDevicePtr
virPCIDeviceListFind(virPCIDeviceListPtr list, virPCIDevicePtr dev)
{
int idx;
if ((idx = virPCIDeviceListFindIndex(list, dev)) >= 0)
return list->devs[idx];
else
return NULL;
}
int virPCIDeviceFileIterate(virPCIDevicePtr dev,
virPCIDeviceFileActor actor,
void *opaque)
{
char *pcidir = NULL;
char *file = NULL;
DIR *dir = NULL;
int ret = -1;
struct dirent *ent;
int direrr;
if (virAsprintf(&pcidir, "/sys/bus/pci/devices/%04x:%02x:%02x.%x",
dev->domain, dev->bus, dev->slot, dev->function) < 0)
goto cleanup;
if (!(dir = opendir(pcidir))) {
virReportSystemError(errno,
_("cannot open %s"), pcidir);
goto cleanup;
}
while ((direrr = virDirRead(dir, &ent, pcidir)) > 0) {
/* Device assignment requires:
* $PCIDIR/config, $PCIDIR/resource, $PCIDIR/resourceNNN,
* $PCIDIR/rom, $PCIDIR/reset, $PCIDIR/vendor, $PCIDIR/device
*/
if (STREQ(ent->d_name, "config") ||
STRPREFIX(ent->d_name, "resource") ||
STREQ(ent->d_name, "rom") ||
STREQ(ent->d_name, "vendor") ||
STREQ(ent->d_name, "device") ||
STREQ(ent->d_name, "reset")) {
if (virAsprintf(&file, "%s/%s", pcidir, ent->d_name) < 0)
goto cleanup;
if ((actor)(dev, file, opaque) < 0)
goto cleanup;
VIR_FREE(file);
}
}
if (direrr < 0)
goto cleanup;
ret = 0;
cleanup:
if (dir)
closedir(dir);
VIR_FREE(file);
VIR_FREE(pcidir);
return ret;
}
/* virPCIDeviceAddressIOMMUGroupIterate:
* Call @actor for all devices in the same iommu_group as orig
* (including orig itself) Even if there is no iommu_group for the
* device, call @actor once for orig.
*/
int
virPCIDeviceAddressIOMMUGroupIterate(virPCIDeviceAddressPtr orig,
virPCIDeviceAddressActor actor,
void *opaque)
{
char *groupPath = NULL;
DIR *groupDir = NULL;
int ret = -1;
struct dirent *ent;
int direrr;
if (virAsprintf(&groupPath,
PCI_SYSFS "devices/%04x:%02x:%02x.%x/iommu_group/devices",
orig->domain, orig->bus, orig->slot, orig->function) < 0)
goto cleanup;
if (!(groupDir = opendir(groupPath))) {
/* just process the original device, nothing more */
ret = (actor)(orig, opaque);
goto cleanup;
}
while ((direrr = virDirRead(groupDir, &ent, groupPath)) > 0) {
virPCIDeviceAddress newDev;
if (ent->d_name[0] == '.')
continue;
if (virPCIDeviceAddressParse(ent->d_name, &newDev) < 0) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Found invalid device link '%s' in '%s'"),
ent->d_name, groupPath);
goto cleanup;
}
if ((actor)(&newDev, opaque) < 0)
goto cleanup;
}
if (direrr < 0)
goto cleanup;
ret = 0;
cleanup:
VIR_FREE(groupPath);
if (groupDir)
closedir(groupDir);
return ret;
}
static int
virPCIDeviceGetIOMMUGroupAddOne(virPCIDeviceAddressPtr newDevAddr, void *opaque)
{
int ret = -1;
virPCIDeviceListPtr groupList = opaque;
virPCIDevicePtr newDev;
if (!(newDev = virPCIDeviceNew(newDevAddr->domain, newDevAddr->bus,
newDevAddr->slot, newDevAddr->function)))
goto cleanup;
if (virPCIDeviceListAdd(groupList, newDev) < 0)
goto cleanup;
newDev = NULL; /* it's now on the list */
ret = 0;
cleanup:
virPCIDeviceFree(newDev);
return ret;
}
/*
* virPCIDeviceGetIOMMUGroupList - return a virPCIDeviceList containing
* all of the devices in the same iommu_group as @dev.
*
* Return the new list, or NULL on failure
*/
virPCIDeviceListPtr
virPCIDeviceGetIOMMUGroupList(virPCIDevicePtr dev)
{
virPCIDeviceListPtr groupList = virPCIDeviceListNew();
virPCIDeviceAddress devAddr = { dev->domain, dev->bus,
dev->slot, dev->function };
if (!groupList)
goto error;
if (virPCIDeviceAddressIOMMUGroupIterate(&devAddr,
virPCIDeviceGetIOMMUGroupAddOne,
groupList) < 0)
goto error;
return groupList;
error:
virObjectUnref(groupList);
return NULL;
}
typedef struct {
virPCIDeviceAddressPtr **iommuGroupDevices;
size_t *nIommuGroupDevices;
} virPCIDeviceAddressList;
typedef virPCIDeviceAddressList *virPCIDeviceAddressListPtr;
static int
virPCIGetIOMMUGroupAddressesAddOne(virPCIDeviceAddressPtr newDevAddr, void *opaque)
{
int ret = -1;
virPCIDeviceAddressListPtr addrList = opaque;
virPCIDeviceAddressPtr copyAddr;
/* make a copy to insert onto the list */
if (VIR_ALLOC(copyAddr) < 0)
goto cleanup;
*copyAddr = *newDevAddr;
if (VIR_APPEND_ELEMENT(*addrList->iommuGroupDevices,
*addrList->nIommuGroupDevices, copyAddr) < 0)
goto cleanup;
ret = 0;
cleanup:
VIR_FREE(copyAddr);
return ret;
}
/*
* virPCIDeviceAddressGetIOMMUGroupAddresses - return a
* virPCIDeviceList containing all of the devices in the same
* iommu_group as @dev.
*
* Return the new list, or NULL on failure
*/
int
virPCIDeviceAddressGetIOMMUGroupAddresses(virPCIDeviceAddressPtr devAddr,
virPCIDeviceAddressPtr **iommuGroupDevices,
size_t *nIommuGroupDevices)
{
int ret = -1;
virPCIDeviceAddressList addrList = { iommuGroupDevices,
nIommuGroupDevices };
if (virPCIDeviceAddressIOMMUGroupIterate(devAddr,
virPCIGetIOMMUGroupAddressesAddOne,
&addrList) < 0)
goto cleanup;
ret = 0;
cleanup:
return ret;
}
/* virPCIDeviceAddressGetIOMMUGroupNum - return the group number of
* this PCI device's iommu_group, or -2 if there is no iommu_group for
* the device (or -1 if there was any other error)
*/
int
virPCIDeviceAddressGetIOMMUGroupNum(virPCIDeviceAddressPtr addr)
{
char *devName = NULL;
char *devPath = NULL;
char *groupPath = NULL;
const char *groupNumStr;
unsigned int groupNum;
int ret = -1;
if (virAsprintf(&devName, "%.4x:%.2x:%.2x.%.1x", addr->domain,
addr->bus, addr->slot, addr->function) < 0)
goto cleanup;
if (!(devPath = virPCIFile(devName, "iommu_group")))
goto cleanup;
if (virFileIsLink(devPath) != 1) {
ret = -2;
goto cleanup;
}
if (virFileResolveLink(devPath, &groupPath) < 0) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Unable to resolve device %s iommu_group symlink %s"),
devName, devPath);
goto cleanup;
}
groupNumStr = last_component(groupPath);
if (virStrToLong_ui(groupNumStr, NULL, 10, &groupNum) < 0) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("device %s iommu_group symlink %s has "
"invalid group number %s"),
devName, groupPath, groupNumStr);
ret = -1;
goto cleanup;
}
ret = groupNum;
cleanup:
VIR_FREE(devName);
VIR_FREE(devPath);
VIR_FREE(groupPath);
return ret;
}
/* virPCIDeviceGetIOMMUGroupDev - return the name of the device used
* to control this PCI device's group (e.g. "/dev/vfio/15")
*/
char *
virPCIDeviceGetIOMMUGroupDev(virPCIDevicePtr dev)
{
char *devPath = NULL;
char *groupPath = NULL;
char *groupDev = NULL;
if (!(devPath = virPCIFile(dev->name, "iommu_group")))
goto cleanup;
if (virFileIsLink(devPath) != 1) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Invalid device %s iommu_group file %s is not a symlink"),
dev->name, devPath);
goto cleanup;
}
if (virFileResolveLink(devPath, &groupPath) < 0) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Unable to resolve device %s iommu_group symlink %s"),
dev->name, devPath);
goto cleanup;
}
if (virAsprintf(&groupDev, "/dev/vfio/%s",
last_component(groupPath)) < 0)
goto cleanup;
cleanup:
VIR_FREE(devPath);
VIR_FREE(groupPath);
return groupDev;
}
static int
virPCIDeviceDownstreamLacksACS(virPCIDevicePtr dev)
{
uint16_t flags;
uint16_t ctrl;
unsigned int pos;
int fd;
int ret = 0;
uint16_t device_class;
if ((fd = virPCIDeviceConfigOpen(dev, true)) < 0)
return -1;
if (virPCIDeviceInit(dev, fd) < 0) {
ret = -1;
goto cleanup;
}
if (virPCIDeviceReadClass(dev, &device_class) < 0)
goto cleanup;
pos = dev->pcie_cap_pos;
if (!pos || device_class != PCI_CLASS_BRIDGE_PCI)
goto cleanup;
flags = virPCIDeviceRead16(dev, fd, pos + PCI_EXP_FLAGS);
if (((flags & PCI_EXP_FLAGS_TYPE) >> 4) != PCI_EXP_TYPE_DOWNSTREAM)
goto cleanup;
pos = virPCIDeviceFindExtendedCapabilityOffset(dev, fd, PCI_EXT_CAP_ID_ACS);
if (!pos) {
VIR_DEBUG("%s %s: downstream port lacks ACS", dev->id, dev->name);
ret = 1;
goto cleanup;
}
ctrl = virPCIDeviceRead16(dev, fd, pos + PCI_EXT_ACS_CTRL);
if ((ctrl & PCI_EXT_CAP_ACS_ENABLED) != PCI_EXT_CAP_ACS_ENABLED) {
VIR_DEBUG("%s %s: downstream port has ACS disabled",
dev->id, dev->name);
ret = 1;
goto cleanup;
}
cleanup:
virPCIDeviceConfigClose(dev, fd);
return ret;
}
static int
virPCIDeviceIsBehindSwitchLackingACS(virPCIDevicePtr dev)
{
virPCIDevicePtr parent;
if (virPCIDeviceGetParent(dev, &parent) < 0)
return -1;
if (!parent) {
/* if we have no parent, and this is the root bus, ACS doesn't come
* into play since devices on the root bus can't P2P without going
* through the root IOMMU.
*/
if (dev->bus == 0) {
return 0;
} else {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Failed to find parent device for %s"),
dev->name);
return -1;
}
}
/* XXX we should rather fail when we can't find device's parent and
* stop the loop when we get to root instead of just stopping when no
* parent can be found
*/
do {
virPCIDevicePtr tmp;
int acs;
int ret;
acs = virPCIDeviceDownstreamLacksACS(parent);
if (acs) {
virPCIDeviceFree(parent);
if (acs < 0)
return -1;
else
return 1;
}
tmp = parent;
ret = virPCIDeviceGetParent(parent, &parent);
virPCIDeviceFree(tmp);
if (ret < 0)
return -1;
} while (parent);
return 0;
}
int virPCIDeviceIsAssignable(virPCIDevicePtr dev,
int strict_acs_check)
{
int ret;
/* XXX This could be a great place to actually check that a non-managed
* device isn't in use, e.g. by checking that device is either un-bound
* or bound to a stub driver.
*/
ret = virPCIDeviceIsBehindSwitchLackingACS(dev);
if (ret < 0)
return 0;
if (ret) {
if (!strict_acs_check) {
VIR_DEBUG("%s %s: strict ACS check disabled; device assignment allowed",
dev->id, dev->name);
} else {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Device %s is behind a switch lacking ACS and "
"cannot be assigned"),
dev->name);
return 0;
}
}
return 1;
}
static int
logStrToLong_ui(char const *s,
char **end_ptr,
int base,
unsigned int *result)
{
int ret = 0;
ret = virStrToLong_ui(s, end_ptr, base, result);
if (ret != 0) {
VIR_ERROR(_("Failed to convert '%s' to unsigned int"), s);
} else {
VIR_DEBUG("Converted '%s' to unsigned int %u", s, *result);
}
return ret;
}
int
virPCIDeviceAddressParse(char *address,
virPCIDeviceAddressPtr bdf)
{
char *p = NULL;
int ret = -1;
if ((address == NULL) || (logStrToLong_ui(address, &p, 16,
&bdf->domain) == -1)) {
goto out;
}
if ((p == NULL) || (logStrToLong_ui(p+1, &p, 16,
&bdf->bus) == -1)) {
goto out;
}
if ((p == NULL) || (logStrToLong_ui(p+1, &p, 16,
&bdf->slot) == -1)) {
goto out;
}
if ((p == NULL) || (logStrToLong_ui(p+1, &p, 16,
&bdf->function) == -1)) {
goto out;
}
ret = 0;
out:
return ret;
}
#ifdef __linux__
/*
* returns true if equal
*/
static bool
virPCIDeviceAddressIsEqual(virPCIDeviceAddressPtr bdf1,
virPCIDeviceAddressPtr bdf2)
{
return ((bdf1->domain == bdf2->domain) &&
(bdf1->bus == bdf2->bus) &&
(bdf1->slot == bdf2->slot) &&
(bdf1->function == bdf2->function));
}
static int
virPCIGetDeviceAddressFromSysfsLink(const char *device_link,
virPCIDeviceAddressPtr *bdf)
{
char *config_address = NULL;
char *device_path = NULL;
char errbuf[64];
int ret = -1;
VIR_DEBUG("Attempting to resolve device path from device link '%s'",
device_link);
if (!virFileExists(device_link)) {
VIR_DEBUG("sysfs_path '%s' does not exist", device_link);
return ret;
}
device_path = canonicalize_file_name(device_link);
if (device_path == NULL) {
memset(errbuf, '\0', sizeof(errbuf));
virReportSystemError(errno,
_("Failed to resolve device link '%s'"),
device_link);
return ret;
}
config_address = last_component(device_path);
if (VIR_ALLOC(*bdf) != 0)
goto out;
if (virPCIDeviceAddressParse(config_address, *bdf) != 0) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Failed to parse PCI config address '%s'"),
config_address);
VIR_FREE(*bdf);
goto out;
}
VIR_DEBUG("virPCIDeviceAddress %.4x:%.2x:%.2x.%.1x",
(*bdf)->domain,
(*bdf)->bus,
(*bdf)->slot,
(*bdf)->function);
ret = 0;
out:
VIR_FREE(device_path);
return ret;
}
/*
* Returns Physical function given a virtual function
*/
int
virPCIGetPhysicalFunction(const char *vf_sysfs_path,
virPCIDeviceAddressPtr *physical_function)
{
int ret = -1;
char *device_link = NULL;
VIR_DEBUG("Attempting to get SR IOV physical function for device "
"with sysfs path '%s'", vf_sysfs_path);
if (virBuildPath(&device_link, vf_sysfs_path, "physfn") == -1) {
virReportOOMError();
return ret;
} else {
ret = virPCIGetDeviceAddressFromSysfsLink(device_link,
physical_function);
}
VIR_FREE(device_link);
return ret;
}
/*
* Returns virtual functions of a physical function
*/
int
virPCIGetVirtualFunctions(const char *sysfs_path,
virPCIDeviceAddressPtr **virtual_functions,
size_t *num_virtual_functions)
{
int ret = -1;
size_t i;
char *device_link = NULL;
virPCIDeviceAddress *config_addr = NULL;
VIR_DEBUG("Attempting to get SR IOV virtual functions for device"
"with sysfs path '%s'", sysfs_path);
*virtual_functions = NULL;
*num_virtual_functions = 0;
do {
/* look for virtfn%d links until one isn't found */
if (virAsprintf(&device_link, "%s/virtfn%zu", sysfs_path, *num_virtual_functions) < 0)
goto error;
if (!virFileExists(device_link))
break;
if (virPCIGetDeviceAddressFromSysfsLink(device_link, &config_addr) < 0) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Failed to get SRIOV function from device link '%s'"),
device_link);
goto error;
}
VIR_DEBUG("Found virtual function %zu", *num_virtual_functions);
if (VIR_APPEND_ELEMENT(*virtual_functions, *num_virtual_functions, config_addr) < 0)
goto error;
VIR_FREE(device_link);
} while (1);
ret = 0;
cleanup:
VIR_FREE(device_link);
VIR_FREE(config_addr);
return ret;
error:
for (i = 0; i < *num_virtual_functions; i++)
VIR_FREE((*virtual_functions)[i]);
VIR_FREE(*virtual_functions);
goto cleanup;
}
/*
* Returns 1 if vf device is a virtual function, 0 if not, -1 on error
*/
int
virPCIIsVirtualFunction(const char *vf_sysfs_device_link)
{
char *vf_sysfs_physfn_link = NULL;
int ret = -1;
if (virAsprintf(&vf_sysfs_physfn_link, "%s/physfn",
vf_sysfs_device_link) < 0)
return ret;
ret = virFileExists(vf_sysfs_physfn_link);
VIR_FREE(vf_sysfs_physfn_link);
return ret;
}
/*
* Returns the sriov virtual function index of vf given its pf
*/
int
virPCIGetVirtualFunctionIndex(const char *pf_sysfs_device_link,
const char *vf_sysfs_device_link,
int *vf_index)
{
int ret = -1;
size_t i;
size_t num_virt_fns = 0;
virPCIDeviceAddressPtr vf_bdf = NULL;
virPCIDeviceAddressPtr *virt_fns = NULL;
if (virPCIGetDeviceAddressFromSysfsLink(vf_sysfs_device_link,
&vf_bdf) < 0)
return ret;
if (virPCIGetVirtualFunctions(pf_sysfs_device_link, &virt_fns,
&num_virt_fns) < 0) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Error getting physical function's '%s' "
"virtual_functions"), pf_sysfs_device_link);
goto out;
}
for (i = 0; i < num_virt_fns; i++) {
if (virPCIDeviceAddressIsEqual(vf_bdf, virt_fns[i])) {
*vf_index = i;
ret = 0;
break;
}
}
out:
/* free virtual functions */
for (i = 0; i < num_virt_fns; i++)
VIR_FREE(virt_fns[i]);
VIR_FREE(virt_fns);
VIR_FREE(vf_bdf);
return ret;
}
/*
* Returns a path to the PCI sysfs file given the BDF of the PCI function
*/
int
virPCIGetSysfsFile(char *virPCIDeviceName, char **pci_sysfs_device_link)
{
if (virAsprintf(pci_sysfs_device_link, PCI_SYSFS "devices/%s",
virPCIDeviceName) < 0)
return -1;
return 0;
}
int
virPCIDeviceAddressGetSysfsFile(virPCIDeviceAddressPtr dev,
char **pci_sysfs_device_link)
{
if (virAsprintf(pci_sysfs_device_link,
PCI_SYSFS "devices/%04x:%02x:%02x.%x", dev->domain,
dev->bus, dev->slot, dev->function) < 0)
return -1;
return 0;
}
/*
* Returns the network device name of a pci device
*/
int
virPCIGetNetName(char *device_link_sysfs_path, char **netname)
{
char *pcidev_sysfs_net_path = NULL;
int ret = -1;
DIR *dir = NULL;
struct dirent *entry = NULL;
if (virBuildPath(&pcidev_sysfs_net_path, device_link_sysfs_path,
"net") == -1) {
virReportOOMError();
return -1;
}
dir = opendir(pcidev_sysfs_net_path);
if (dir == NULL)
goto out;
while (virDirRead(dir, &entry, pcidev_sysfs_net_path) > 0) {
if (STREQ(entry->d_name, ".") ||
STREQ(entry->d_name, ".."))
continue;
/* Assume a single directory entry */
if (VIR_STRDUP(*netname, entry->d_name) > 0)
ret = 0;
break;
}
closedir(dir);
out:
VIR_FREE(pcidev_sysfs_net_path);
return ret;
}
int
virPCIGetVirtualFunctionInfo(const char *vf_sysfs_device_path,
char **pfname, int *vf_index)
{
virPCIDeviceAddressPtr pf_config_address = NULL;
char *pf_sysfs_device_path = NULL;
int ret = -1;
if (virPCIGetPhysicalFunction(vf_sysfs_device_path, &pf_config_address) < 0)
return ret;
if (virPCIDeviceAddressGetSysfsFile(pf_config_address,
&pf_sysfs_device_path) < 0) {
VIR_FREE(pf_config_address);
return ret;
}
if (virPCIGetVirtualFunctionIndex(pf_sysfs_device_path, vf_sysfs_device_path,
vf_index) < 0)
goto cleanup;
ret = virPCIGetNetName(pf_sysfs_device_path, pfname);
cleanup:
VIR_FREE(pf_config_address);
VIR_FREE(pf_sysfs_device_path);
return ret;
}
#else
static const char *unsupported = N_("not supported on non-linux platforms");
int
virPCIGetPhysicalFunction(const char *vf_sysfs_path ATTRIBUTE_UNUSED,
virPCIDeviceAddressPtr *physical_function ATTRIBUTE_UNUSED)
{
virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported));
return -1;
}
int
virPCIGetVirtualFunctions(const char *sysfs_path ATTRIBUTE_UNUSED,
virPCIDeviceAddressPtr **virtual_functions ATTRIBUTE_UNUSED,
size_t *num_virtual_functions ATTRIBUTE_UNUSED)
{
virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported));
return -1;
}
int
virPCIIsVirtualFunction(const char *vf_sysfs_device_link ATTRIBUTE_UNUSED)
{
virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported));
return -1;
}
int
virPCIGetVirtualFunctionIndex(const char *pf_sysfs_device_link ATTRIBUTE_UNUSED,
const char *vf_sysfs_device_link ATTRIBUTE_UNUSED,
int *vf_index ATTRIBUTE_UNUSED)
{
virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported));
return -1;
}
int
virPCIDeviceAddressGetSysfsFile(virPCIDeviceAddressPtr dev ATTRIBUTE_UNUSED,
char **pci_sysfs_device_link ATTRIBUTE_UNUSED)
{
virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported));
return -1;
}
int
virPCIGetNetName(char *device_link_sysfs_path ATTRIBUTE_UNUSED,
char **netname ATTRIBUTE_UNUSED)
{
virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported));
return -1;
}
int
virPCIGetVirtualFunctionInfo(const char *vf_sysfs_device_path ATTRIBUTE_UNUSED,
char **pfname ATTRIBUTE_UNUSED,
int *vf_index ATTRIBUTE_UNUSED)
{
virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported));
return -1;
}
#endif /* __linux__ */
int
virPCIDeviceIsPCIExpress(virPCIDevicePtr dev)
{
int fd;
int ret = -1;
if ((fd = virPCIDeviceConfigOpen(dev, true)) < 0)
return ret;
if (virPCIDeviceInit(dev, fd) < 0)
goto cleanup;
ret = dev->pcie_cap_pos != 0;
cleanup:
virPCIDeviceConfigClose(dev, fd);
return ret;
}
int
virPCIDeviceHasPCIExpressLink(virPCIDevicePtr dev)
{
int fd;
int ret = -1;
uint16_t cap, type;
if ((fd = virPCIDeviceConfigOpen(dev, true)) < 0)
return ret;
if (virPCIDeviceInit(dev, fd) < 0)
goto cleanup;
cap = virPCIDeviceRead16(dev, fd, dev->pcie_cap_pos + PCI_CAP_FLAGS);
type = (cap & PCI_EXP_FLAGS_TYPE) >> 4;
ret = type != PCI_EXP_TYPE_ROOT_INT_EP && type != PCI_EXP_TYPE_ROOT_EC;
cleanup:
virPCIDeviceConfigClose(dev, fd);
return ret;
}
int
virPCIDeviceGetLinkCapSta(virPCIDevicePtr dev,
int *cap_port,
unsigned int *cap_speed,
unsigned int *cap_width,
unsigned int *sta_speed,
unsigned int *sta_width)
{
uint32_t t;
int fd;
int ret = -1;
if ((fd = virPCIDeviceConfigOpen(dev, true)) < 0)
return ret;
if (virPCIDeviceInit(dev, fd) < 0)
goto cleanup;
if (!dev->pcie_cap_pos) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("pci device %s is not a PCI-Express device"),
dev->name);
goto cleanup;
}
t = virPCIDeviceRead32(dev, fd, dev->pcie_cap_pos + PCI_EXP_LNKCAP);
*cap_port = t >> 24;
*cap_speed = t & PCI_EXP_LNKCAP_SPEED;
*cap_width = (t & PCI_EXP_LNKCAP_WIDTH) >> 4;
t = virPCIDeviceRead16(dev, fd, dev->pcie_cap_pos + PCI_EXP_LNKSTA);
*sta_speed = t & PCI_EXP_LNKSTA_SPEED;
*sta_width = (t & PCI_EXP_LNKSTA_WIDTH) >> 4;
ret = 0;
cleanup:
virPCIDeviceConfigClose(dev, fd);
return ret;
}
void
virPCIEDeviceInfoFree(virPCIEDeviceInfoPtr dev)
{
if (!dev)
return;
VIR_FREE(dev->link_cap);
VIR_FREE(dev->link_sta);
VIR_FREE(dev);
}