From: Ian Campbell <ian.campbell@citrix.com>

xend prior to 4.0 understands vcpus as maxvcpus and vcpu_avail
as a bit map of which cpus are online (default is all).

xend from 4.0 onwards understands maxvcpus as maxvcpus and
vcpus as the number which are online (from 0..N-1). The
upstream commit (68a94cf528e6 "xm: Add maxvcpus support")
claims that if maxvcpus is omitted then the old behaviour
(i.e. obeying vcpu_avail) is retained, but AFAICT it was not,
in this case vcpu==maxcpus==online cpus. This is good for us
because handling anything else would be fiddly.

This patch changes parsing of the virDomainDef maxvcpus and vcpus
entries to use the corresponding 'maxvcpus' and 'vcpus' settings
from xm and xl config. It also drops use of the old Xen 3.x
'vcpu_avail' setting.

The change also removes the maxvcpus limit of MAX_VIRT_VCPUS (since
maxvcpus is simply a count, not a bit mask), which is particularly
crucial on ARM where MAX_VIRT_CPUS == 1 (since all guests are
expected to support vcpu placement, and therefore only the boot
vcpu's info lives in the shared info page).

Existing tests adjusted accordingly, and new tests added for the
'maxvcpus' setting.

https://bugzilla.redhat.com/show_bug.cgi?id=1281710

Commit id '3c7590e0' added the flag to the rbd backend, but provided
no means via virsh to use the flag.  This patch adds a '--delete-snapshots'
option to both the "undefine" and "vol-delete" commands.

For "undefine", the flag is combined with the "--remove-all-storage" flag
in order to add the appropriate flag for the virStorageVolDelete call;
whereas, for the "vol-delete" command, just the flag is sufficient since
it's only operating on one volume.

Currently only supported for rbd backends.

Although they've been present for quite a while, they weren't added
to the API definition, so add them there to make it clearer.

Currently only the RBD backend even checks for any flags.

The initial commit '74951ead' did not include the proper check for whether
any flags are supported by the driver.

Even though the driver doesn't support VIR_STORAGE_VOL_DELETE_ZEROED,
it still checks and allows the processing to continue

Also add the new VIR_STORAGE_VOL_DELETE_WITH_SNAPSHOTS since it is handled
as of commit id '3c7590e0'.

Commit id '71ce4759' altered the cgroup processing with respect to the
call to virCgroupAddTask being moved out from lower layers into the calling
layers especially for qemu processing of emulator and vcpu threads. The
movement affected lxc insomuch as it is possible for a code path to
return a NULL cgroup *and* a 0 return status via virCgroupNewPartition
failure when virCgroupNewIgnoreError succeeded when virCgroupNewMachineManual
returns. Coverity pointed out that would cause virCgroupAddTask to core.

This patch will check for a NULL cgroup as well as the negative return
and just return the NULL cgroup to the caller (as it would have previously)

xendConfigVersion is no longer used, so remove it from the
xenUnifiedPrivate struct.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Remove use of xendConfigVersion in the s-expresion config formatter/parser
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Remove use of XEND_CONFIG_VERSION_* in xend_internal.c
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Remove use of XEND_CONFIG_VERSION_* in the Xen unified driver.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Remove use of XEND_CONFIG_VERSION_* in s-expression parser/formatter.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Change all xml2sexpr tests to use the latest XEND_CONFIG_VERSION
(XEND_CONFIG_VERSION_3_1_0 = 4). Fix tests that do not conform to
the latest version.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

It has been quite some time since xend required specifying cdroms
and fds in '(image (hvm ...))'. Remove the code from the parsing
and formatting functions and fixup the associated tests.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Change all sexpr2xml tests to use the latest XEND_CONFIG_VERSION
(XEND_CONFIG_VERSION_3_1_0 = 4). Fix tests that do not conform to
the latest version.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Remove use of xendConfigVersion in the xm and xl config formatter/parsers
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Remove use of XEND_CONFIG_VERSION_* in xm parser/formatter.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Remove use of XEND_CONFIG_VERSION_* from xenconfig/xen_common.c
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Change all tests to use the latest XEND_CONFIG_VERSION
(XEND_CONFIG_VERSION_3_1_0 = 4). Fix tests that do not conform to
the latest version.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Remove XML to s-expression converstion tests for old xend 3.0.2
config format.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Remove s-expression to XML conversion tests for old xend 3.0.2
config format.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Remove the fullvirt-net-ioemu test since explicitly specifying
'type=ioemu' has not been needed in xm/xend for a long time. It is
not used at all in xl/libxl.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Remove xm config tests for old xend 3.0.2 config format.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

https://bugzilla.redhat.com/show_bug.cgi?id=830056

Utilize recently added VIR_STORAGE_POOL_CREATE_WITH_BUILD* flags in
order to pass the flags along to the virStoragePoolCreateXML and
virStoragePoolCreate API's.

This affects the 'virsh pool-create', 'virsh pool-create-as', and
'virsh pool-start' commands.  While it could be argued that pool-start
doesn't need the flags, they could prove useful for someone trying to
do one command build --overwrite and start command processing or
essentially starting with a clean slate.

NB:
This patch is loosely based upon code originally authored by Osier
Yang that were not reviewed and pushed, see:

https://www.redhat.com/archives/libvir-list/2012-July/msg00497.html

Although they both are the same now, a future patch will add new options
to pool-create-as. So create a common macro to capture commonality, then
use that in the command specific structure.

Although not currently used in more than one command, it soon will be
so create a common macro to be used in the new command location.

Additionally, add the ".flags = 0," for both to match the expections
of the structure being predefined.

Rather than continually cut/paste the "file" option for pool command
option structures, generate a macro which will commonly define it for
any command.  Then of course use that macro.

Rather than continually cut/paste the "pool" option for pool command
option structures, generate a macro which will commonly define it for
any command.  Then of course use that macro.

https://bugzilla.redhat.com/show_bug.cgi?id=830056

Add flags handling to the virStoragePoolCreate and virStoragePoolCreateXML
API's which will allow the caller to provide the capability for the storage
pool create API's to also perform a pool build during creation rather than
requiring the additional buildPool step. This will allow transient pools
to be defined, built, and started.

The new flags are:

    * VIR_STORAGE_POOL_CREATE_WITH_BUILD
      Perform buildPool without any flags passed.

    * VIR_STORAGE_POOL_CREATE_WITH_BUILD_OVERWRITE
      Perform buildPool using VIR_STORAGE_POOL_BUILD_OVERWRITE flag.

    * VIR_STORAGE_POOL_CREATE_WITH_BUILD_NO_OVERWRITE
      Perform buildPool using VIR_STORAGE_POOL_BUILD_NO_OVERWRITE flag.

It is up to the backend to handle the processing of build flags. The
overwrite and no-overwrite flags are mutually exclusive.

NB:
This patch is loosely based upon code originally authored by Osier
Yang that were not reviewed and pushed, see:

https://www.redhat.com/archives/libvir-list/2012-July/msg01328.html

This function is no longer used outside domain_addr.c

We only support hotplugging SCSI controllers.
The USB and virtio-serial related code was never reachable because
this function was only called for VIR_DOMAIN_CONTROLLER_TYPE_SCSI
controllers.

This reverts commit ee0d97a7 and parts of commits 16db8d2e
and d6d54cd1.

This function calls qemuDomainAttachControllerDevice for SCSI
controllers and reports an error for all other controllers.

Move the error inside qemuDomainAttachControllerDevice and delete this
wrapper.

Add a configure option to disable virt-login-shell build even if lxc is
enabled.

Commit id '71b803ac' assumed that the storage pool source device path
was required for a 'logical' pool. This resulted in a failure to start
a pool without any device path defined.

So, adjust the virStorageBackendLogicalMatchPoolSource logic to
return success if at least the pool name matches the vgs output
when no pool source device path is/are provided.

A closer review of the code shows that for the transition from paused to
running which was supposed to emit the VIR_DOMAIN_EVENT_RESUMED - no event
would be generated. Rather the event is generated when going from running
to running.

Following the 'was_running' boolean shows it is set when the domain obj
is active and the domain obj state is VIR_DOMAIN_RUNNING. So rather than
using was_running to generate the RESUMED event, use !was_running

https://bugzilla.redhat.com/show_bug.cgi?id=1270709

When a volume wipe is successful, perform a volume refresh afterwards to
update any volume data that may be used in future volume commands, such as
volume resize.  For a raw file volume, a wipe could truncate the file and
a followup volume resize the capacity may fail because the volume target
allocation isn't updated to reflect the wipe activity.

It is not used by the caller.

The only caller always passes 0 for the extent start.
Drop the 'extent_start' parameter, as well as the mention of extents
from the function name.

Change off_t extent_length to unsigned long long wipe_len, as well as the
'remain' variable.

We do not need to pass a zero-filled buffer as an argument,
the function can allocate its own.

Return -1:
* on all failures of fdatasync. Instead of propagating -errno
  all the way up to the virStorageVolWipe API, which is documented
  to return 0 or -1.
* after a partial wipe. If safewrite failed, we would re-use the
  non-negative return value of lseek (which should be 0 in this case,
  because that's the only offset we seek to).

MemLock is already used in other modules and, while still an
abbreviation, is not ambiguous.

When the function changes the memory lock limit for the first time,
it will retrieve the current value and store it inside the
virDomainObj for the domain.

When the function is called again, if memory locking is no longer
needed, it will be able to restore the memory locking limit to its
original value.