The current code is initializing capabilities before setting
directory permissions. Thus the QEMU binaries being run may
not have the ability to create the UNIX monitor socket on
the first run of libvirtd.

Commit dfa1e1dd removed libxenctrl from LIBXL_LIBS, but the libxl
driver uses a symbol from this library.  Explicitly link with
libxenctrl instead of relying on the build system to support
implicit DSO linking.

https://bugzilla.redhat.com/show_bug.cgi?id=887017 reports that
even though libvirt attempts to set fs.aio-max-nr via sysctl,
the file was installed with the wrong name and gets ignored by
sysctl.  Furthermore, 'man systcl.d' recommends that packages
install into hard-coded /usr/lib/sysctl.d (even when libdir is
/usr/lib64), so that sysadmins can use /etc/sysctl.d for overrides.

* daemon/Makefile.am (install-sysctl, uninstall-sysctl): Use
correct location.
* libvirt.spec.in (network_files): Reflect this.

See also commit 66ff2ddc, where we avoided installing these files
as executables.

* daemon/Makefile.am (libvirtd.service): Drop chmod.
* tools/Makefile.am (libvirt-guests.service): Likewise.
* src/Makefile.am (virtlockd.service, virtlockd.socket):
Likewise.

virtlockd.service could be installed to a configurable root,
but virtlockd.socket was hardcoded to installation into a
distro.

* src/Makefile.am (virtlockd.service, virtlockd.socket): Drop
unused substitutions.
* src/locking/virtlockd.socket.in (ListenStream): Don't hard-code
/var.

We had several different styles of .in conversion in our Makefiles:
ALLCAPS, @ALLCAPS@, @lower@, ::lower::
Canonicalize on one form, to make it easier to copy and paste
between .in files.

Also, we were using some non-portable sed constructs: \@ is an
undefined escape sequence (it happens to be @ itself in GNU sed,
but POSIX allows it to mean something else), as well as risky
behavior (failure to consistently quote things means a space
in $(sysconfdir) could throw things off; also, Autoconf recommends
using | rather than , or ! in the s||| operator, because | has to
be quoted in shell and is therefore less likely to appear in file
names than , or !).

Fix all of these uses to follow the same syntax.

* daemon/libvirtd.8.in: Switch to @var@.
* tools/virt-xml-validate.in: Likewise.
* tools/virt-pki-validate.in: Likewise.
* src/locking/virtlockd.init.in: Likewise.
* daemon/Makefile.am: Prefer | over ! in sed.
(libvirtd.8): Prefer consistent substitution.
(libvirtd.init, libvirtd.service): Avoid non-portable sed.
* tools/Makefile.am (libvirt-guests.sh, libvirt-guests.init)
(libvirt-guests.service): Likewise.
(virt-xml-validate, virt-pki-validate, virt-sanlock-cleanup):
Prefer consistent capitalization.
* src/Makefile.am (virtlockd.init, virtlockd.service)
(virtlockd.socket): Prefer consistent substitution.

This prevents domain starting and disk attaching if the shared disk's
setting conflicts with other active domain(s), E.g. A domain with
"sgio" set as "filtered", however, another active domain is using
it set as "unfiltered".

This ignores the default "filtered" if unpriv_sgio is not supported
by kernel, but for explicit request "filtered", it error out for
domain starting.

Like "rawio", "sgio" is only allowed for block disk of device
type "lun".

It doesn't default disk->sgio to "filtered" when parsing, as
it won't be able to distinguish explicitly requested "filtered"
and a default "filtered" in driver then. We have to error out for
explicit request when the kernel doesn't support the new sysfs
knob "unpriv_sgio", however, for defaulted "filtered", we can
just ignore it if the kernel doesn't support "unpriv_sgio".

This introduces new XML tag "sgio" for disk, its valid values
are "filtered" and "unfiltered", setting it as "filtered" will
set the disk's unpriv_sgio to 0, and "unfiltered" to set it
as 1, which allows the unprivileged SG_IO commands.

This introduces a hash table for qemu driver, to store the shared
disk's info as (@major:minor, @ref_count). @ref_count is the number
of domains which shares the disk.

Since we only care about if the disk support unprivileged SG_IO
commands, and the SG_IO commands only make sense for block disk,
this patch only manages (add/remove hash entry) the shared disk for
block disk.

* src/qemu/qemu_conf.h: (Add member 'sharedDisks' of type
                         virHashTablePtr; Declare helpers
                         qemuGetSharedDiskKey, qemuAddSharedDisk
                         and qemuRemoveSharedDisk)
* src/qemu/qemu_conf.c (Implement the 3 helpers)
* src/qemu/qemu_process.c (Update 'sharedDisks' when domain
                           starting and shutdown)
* src/qemu/qemu_driver.c (Update 'sharedDisks' when attaching
                          or detaching disk).

"virGetDeviceID" could be used across the sources, but it doesn't
relate with this series, and could be done later.

* src/util/virutil.h: (Declare virGetDeviceID, and
                       vir{Get,Set}DeviceUnprivSGIO)
* src/util/virutil.c: (Implement virGetDeviceID and
                       vir{Get,Set}DeviceUnprivSGIO)
* src/libvirt_private.syms: Export private symbols of upper helpers

A redefinition of an external inactive snapshot/checkpoint wasn't
possible without this change.

When the disk alignment check done while redefining an existing snapshot
failed, the qemu driver attempted to free the existing snapshot. As in
the cleanup path the definition of the snapshot wasn't assigned, the
cleanup code dereferenced a NULL pointer.

This patch changes the behavior on error paths while redefining snapshot
in two ways:

1) On failure, modifications done on the snapshot definition object are
rolled back.

2) The previous definition of the data isn't freed until it's certain it
won't be needed any more.

This change avoids the segfault and additionally the snapshot doesn't
vanish if redefinition fails for some reason.

Allow to use definition objects with this predicate function.

This also changes the function signature to take a
virDomainChrSourceDefPtr instead of just a path, since it needs to
differentiate behavior based on source->type.

The functionality provided in virchrdev.c (previously virconsole.c) is
applicable to other types of character devices besides consoles, such
as channels.  This patch is just code motion, renaming things such as
"console" or "pty", instead using more general terms such as
"character device" or "device path".

This is just code motion, in preparation to rename identifiers to be
less console-specific.

This patch adds a new API, virDomainOpenChannel, that uses streams to
connect to a virtio channel on a guest.  This creates a secure
communication channel between a guest and a libvirt client.

This behaves the same as virDomainOpenConsole, except on channels
instead of console/serial/parallel devices.

Commit d13155c2 changed which files get installed for the
libvirt-guests service, but did not touch up the mingw spec
file.  As a result, rpmbuild complained:

RPM build errors:
    Installed (but unpackaged) file(s) found:
   /usr/i686-w64-mingw32/sys-root/mingw/libexec/libvirt-guests.sh
   /usr/x86_64-w64-mingw32/sys-root/mingw/libexec/libvirt-guests.sh

which in turn breaks ./autobuild.sh when cross-compilers are present.

* mingw-libvirt.spec.in: Remove files not relevant to mingw.

gcc -O2 complained:
../../src/conf/network_conf.c: In function 'virNetworkDefUpdateDNSSrv':
../../src/conf/network_conf.c:3232: error: 'foundIdx' may be used uninitialized in this function [-Wuninitialized]

It turned out to be a spurious warning (we didn't use foundIdx
unless foundCt was non-zero).  But in investigating that, I noticed
a worse problem: we were using 'if (foundCt > 1)', but since foundCt
was bool, it could never be > 1.

* src/conf/network_conf.c (virNetworkDefUpdateDNSHost): Use
correct type.
(virNetworkDefUpdateDNSSrv): Likewise, and silence compiler
warning.

Ignore the return status check for vmwareUpdateVMStatus in convenience
routine vmwareDomainObjListUpdateDomain

Since 4c993d8a we failed to set this important capability, which
allows starting a domain with QXL video card. We set DEVICE_QXL
capability bit instead, which is not necessary wrong. Anyway, if
qemu supports the new '-device qxl' it supports older '-vga qxl'
as well. The latter is used for the primary (the first) qxl video
card, the former for other video cards.

since they're not scripts but systemd service files.

Commit b3f2b4ca left buf unallocated in
the case of QMP capability probing being used, leading to a segfault in
strlen in the cleanup path.

This patch opens the log and allocates the buffer if QMP probing was
used, so we can display the helpful error message.

Ignore the return in parallelsMakePoolName() since subsequent check
validates name was allocated.

Build failure detected by Jenkins autobuilder:
http://honk.sigxcpu.org:8001/job/libvirt-build/472/changes

* .gnulib: Update to latest, for stdio.h rpl_fwrite fix.

Despite our great effort we still parsed qemu log output.
We wouldn't notice unless upcoming qemu 1.4 changed the
format of the logs slightly. Anyway, now we should gather
all interesting knobs like pty paths from monitor. Moreover,
since for historical reasons the first console can be just
an alias to the first serial port, we need to check this and
copy the pty path if that's the case to the first console.

A recent build failure made me realize that we could usefully add
a bit more information to configure output, for aid in analysis of
failed builds.  Pulling in the autobuild module merely adds these
four lines to configure output:

configure: autobuild project... libvirt
configure: autobuild revision... v1.0.1-113-g7a74eeaf
configure: autobuild hostname... myhost
configure: autobuild timestamp... 20130102T233543Z

which can be useful even if not using the Autobuild project to parse
build logs.

* bootstrap.conf (gnulib_modules): Add autobuild.
* configure.ac: Favor git version over release version, when available.

'make syntax-check' warned that gnulib's copyright is now out of date.

* .gnulib: Update to latest, for copyright year bump.
* gnulib/local/m4/ssize_t.m4.diff: Regenerate.
* bootstrap: Synchronize from upstream.

virNodeDeviceLookupByKey is inexistent.

This reverts commit 28224c4d
which shouldn't be needed at all because with current qemu
we obtain all paths from 'query-chardev' output. We ought
not parse log output at all anymore.

Since 586502189edf9fd0f89a83de96717a2ea826fdb0 qemu commit, the log
lines reporting chardev's path has changed from:

$ ./x86_64-softmmu/qemu-system-x86_64 -serial pty -serial pty -monitor pty
char device redirected to /dev/pts/5
char device redirected to /dev/pts/6
char device redirected to /dev/pts/7

to:

$ ./x86_64-softmmu/qemu-system-x86_64 -serial pty -serial pty -monitor pty
char device compat_monitor0 redirected to /dev/pts/5
char device serial0 redirected to /dev/pts/6
char device serial1 redirected to /dev/pts/7

However, with current code we are not prepared for such change, which
results in us being unable to start any domain.