/* * linux/arch/arm/mach-omap2/sleep.S * * (C) Copyright 2007 * Texas Instruments * Karthik Dasu * * (C) Copyright 2004 * Texas Instruments, * Richard Woodruff * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include "cm.h" #include "prm.h" #include "sdrc.h" #include "control.h" /* * Registers access definitions */ #define SDRC_SCRATCHPAD_SEM_OFFS 0xc #define SDRC_SCRATCHPAD_SEM_V OMAP343X_SCRATCHPAD_REGADDR\ (SDRC_SCRATCHPAD_SEM_OFFS) #define PM_PREPWSTST_CORE_P OMAP3430_PRM_BASE + CORE_MOD +\ OMAP3430_PM_PREPWSTST #define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD + OMAP2_PM_PWSTCTRL #define CM_IDLEST1_CORE_V OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1) #define CM_IDLEST_CKGEN_V OMAP34XX_CM_REGADDR(PLL_MOD, CM_IDLEST) #define SRAM_BASE_P OMAP3_SRAM_PA #define CONTROL_STAT OMAP343X_CTRL_BASE + OMAP343X_CONTROL_STATUS #define CONTROL_MEM_RTA_CTRL (OMAP343X_CTRL_BASE +\ OMAP36XX_CONTROL_MEM_RTA_CTRL) /* Move this as correct place is available */ #define SCRATCHPAD_MEM_OFFS 0x310 #define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE +\ OMAP343X_CONTROL_MEM_WKUP +\ SCRATCHPAD_MEM_OFFS) #define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER) #define SDRC_SYSCONFIG_P (OMAP343X_SDRC_BASE + SDRC_SYSCONFIG) #define SDRC_MR_0_P (OMAP343X_SDRC_BASE + SDRC_MR_0) #define SDRC_EMR2_0_P (OMAP343X_SDRC_BASE + SDRC_EMR2_0) #define SDRC_MANUAL_0_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_0) #define SDRC_MR_1_P (OMAP343X_SDRC_BASE + SDRC_MR_1) #define SDRC_EMR2_1_P (OMAP343X_SDRC_BASE + SDRC_EMR2_1) #define SDRC_MANUAL_1_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_1) #define SDRC_DLLA_STATUS_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) #define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL) /* * API functions */ /* * The "get_*restore_pointer" functions are used to provide a * physical restore address where the ROM code jumps while waking * up from MPU OFF/OSWR state. * The restore pointer is stored into the scratchpad. */ .text /* Function call to get the restore pointer for resume from OFF */ ENTRY(get_restore_pointer) stmfd sp!, {lr} @ save registers on stack adr r0, restore ldmfd sp!, {pc} @ restore regs and return ENTRY(get_restore_pointer_sz) .word . - get_restore_pointer .text /* Function call to get the restore pointer for 3630 resume from OFF */ ENTRY(get_omap3630_restore_pointer) stmfd sp!, {lr} @ save registers on stack adr r0, restore_3630 ldmfd sp!, {pc} @ restore regs and return ENTRY(get_omap3630_restore_pointer_sz) .word . - get_omap3630_restore_pointer .text /* Function call to get the restore pointer for ES3 to resume from OFF */ ENTRY(get_es3_restore_pointer) stmfd sp!, {lr} @ save registers on stack adr r0, restore_es3 ldmfd sp!, {pc} @ restore regs and return ENTRY(get_es3_restore_pointer_sz) .word . - get_es3_restore_pointer .text /* * L2 cache needs to be toggled for stable OFF mode functionality on 3630. * This function sets up a flag that will allow for this toggling to take * place on 3630. Hopefully some version in the future may not need this. */ ENTRY(enable_omap3630_toggle_l2_on_restore) stmfd sp!, {lr} @ save registers on stack /* Setup so that we will disable and enable l2 */ mov r1, #0x1 str r1, l2dis_3630 ldmfd sp!, {pc} @ restore regs and return /* Function to call rom code to save secure ram context */ ENTRY(save_secure_ram_context) stmfd sp!, {r1-r12, lr} @ save registers on stack adr r3, api_params @ r3 points to parameters str r0, [r3,#0x4] @ r0 has sdram address ldr r12, high_mask and r3, r3, r12 ldr r12, sram_phy_addr_mask orr r3, r3, r12 mov r0, #25 @ set service ID for PPA mov r12, r0 @ copy secure service ID in r12 mov r1, #0 @ set task id for ROM code in r1 mov r2, #4 @ set some flags in r2, r6 mov r6, #0xff mcr p15, 0, r0, c7, c10, 4 @ data write barrier mcr p15, 0, r0, c7, c10, 5 @ data memory barrier .word 0xE1600071 @ call SMI monitor (smi #1) nop nop nop nop ldmfd sp!, {r1-r12, pc} sram_phy_addr_mask: .word SRAM_BASE_P high_mask: .word 0xffff api_params: .word 0x4, 0x0, 0x0, 0x1, 0x1 ENTRY(save_secure_ram_context_sz) .word . - save_secure_ram_context /* * ====================== * == Idle entry point == * ====================== */ /* * Forces OMAP into idle state * * omap34xx_cpu_suspend() - This bit of code saves the CPU context if needed * and executes the WFI instruction. Calling WFI effectively changes the * power domains states to the desired target power states. * * * Notes: * - this code gets copied to internal SRAM at boot. The execution pointer * in SRAM is _omap_sram_idle. * - when the OMAP wakes up it continues at different execution points * depending on the low power mode (non-OFF vs OFF modes), * cf. 'Resume path for xxx mode' comments. */ ENTRY(omap34xx_cpu_suspend) stmfd sp!, {r0-r12, lr} @ save registers on stack /* * r0 contains restore pointer in sdram * r1 contains information about saving context: * 0 - No context lost * 1 - Only L1 and logic lost * 2 - Only L2 lost * 3 - Both L1 and L2 lost */ /* Directly jump to WFI is the context save is not required */ cmp r1, #0x0 beq omap3_do_wfi /* Otherwise fall through to the save context code */ save_context_wfi: mov r8, r0 @ Store SDRAM address in r8 mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register mov r4, #0x1 @ Number of parameters for restore call stmia r8!, {r4-r5} @ Push parameters for restore call mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register stmia r8!, {r4-r5} @ Push parameters for restore call /* Check what that target sleep state is from r1 */ cmp r1, #0x2 @ Only L2 lost, no need to save context beq clean_caches l1_logic_lost: /* Store sp and spsr to SDRAM */ mov r4, sp mrs r5, spsr mov r6, lr stmia r8!, {r4-r6} /* Save all ARM registers */ /* Coprocessor access control register */ mrc p15, 0, r6, c1, c0, 2 stmia r8!, {r6} /* TTBR0, TTBR1 and Translation table base control */ mrc p15, 0, r4, c2, c0, 0 mrc p15, 0, r5, c2, c0, 1 mrc p15, 0, r6, c2, c0, 2 stmia r8!, {r4-r6} /* * Domain access control register, data fault status register, * and instruction fault status register */ mrc p15, 0, r4, c3, c0, 0 mrc p15, 0, r5, c5, c0, 0 mrc p15, 0, r6, c5, c0, 1 stmia r8!, {r4-r6} /* * Data aux fault status register, instruction aux fault status, * data fault address register and instruction fault address register */ mrc p15, 0, r4, c5, c1, 0 mrc p15, 0, r5, c5, c1, 1 mrc p15, 0, r6, c6, c0, 0 mrc p15, 0, r7, c6, c0, 2 stmia r8!, {r4-r7} /* * user r/w thread and process ID, user r/o thread and process ID, * priv only thread and process ID, cache size selection */ mrc p15, 0, r4, c13, c0, 2 mrc p15, 0, r5, c13, c0, 3 mrc p15, 0, r6, c13, c0, 4 mrc p15, 2, r7, c0, c0, 0 stmia r8!, {r4-r7} /* Data TLB lockdown, instruction TLB lockdown registers */ mrc p15, 0, r5, c10, c0, 0 mrc p15, 0, r6, c10, c0, 1 stmia r8!, {r5-r6} /* Secure or non secure vector base address, FCSE PID, Context PID*/ mrc p15, 0, r4, c12, c0, 0 mrc p15, 0, r5, c13, c0, 0 mrc p15, 0, r6, c13, c0, 1 stmia r8!, {r4-r6} /* Primary remap, normal remap registers */ mrc p15, 0, r4, c10, c2, 0 mrc p15, 0, r5, c10, c2, 1 stmia r8!,{r4-r5} /* Store current cpsr*/ mrs r2, cpsr stmia r8!, {r2} mrc p15, 0, r4, c1, c0, 0 /* save control register */ stmia r8!, {r4} clean_caches: /* * Clean Data or unified cache to POU * How to invalidate only L1 cache???? - #FIX_ME# * mcr p15, 0, r11, c7, c11, 1 */ cmp r1, #0x1 @ Check whether L2 inval is required beq omap3_do_wfi clean_l2: /* * jump out to kernel flush routine * - reuse that code is better * - it executes in a cached space so is faster than refetch per-block * - should be faster and will change with kernel * - 'might' have to copy address, load and jump to it */ ldr r1, kernel_flush mov lr, pc bx r1 omap3_do_wfi: ldr r4, sdrc_power @ read the SDRC_POWER register ldr r5, [r4] @ read the contents of SDRC_POWER orr r5, r5, #0x40 @ enable self refresh on idle req str r5, [r4] @ write back to SDRC_POWER register /* Data memory barrier and Data sync barrier */ mov r1, #0 mcr p15, 0, r1, c7, c10, 4 mcr p15, 0, r1, c7, c10, 5 /* * =================================== * == WFI instruction => Enter idle == * =================================== */ wfi @ wait for interrupt /* * =================================== * == Resume path for non-OFF modes == * =================================== */ nop nop nop nop nop nop nop nop nop nop bl wait_sdrc_ok /* * =================================== * == Exit point from non-OFF modes == * =================================== */ ldmfd sp!, {r0-r12, pc} @ restore regs and return /* * ============================== * == Resume path for OFF mode == * ============================== */ /* * The restore_* functions are called by the ROM code * when back from WFI in OFF mode. * Cf. the get_*restore_pointer functions. * * restore_es3: applies to 34xx >= ES3.0 * restore_3630: applies to 36xx * restore: common code for 3xxx */ restore_es3: ldr r5, pm_prepwstst_core_p ldr r4, [r5] and r4, r4, #0x3 cmp r4, #0x0 @ Check if previous power state of CORE is OFF bne restore adr r0, es3_sdrc_fix ldr r1, sram_base ldr r2, es3_sdrc_fix_sz mov r2, r2, ror #2 copy_to_sram: ldmia r0!, {r3} @ val = *src stmia r1!, {r3} @ *dst = val subs r2, r2, #0x1 @ num_words-- bne copy_to_sram ldr r1, sram_base blx r1 b restore restore_3630: ldr r1, pm_prepwstst_core_p ldr r2, [r1] and r2, r2, #0x3 cmp r2, #0x0 @ Check if previous power state of CORE is OFF bne restore /* Disable RTA before giving control */ ldr r1, control_mem_rta mov r2, #OMAP36XX_RTA_DISABLE str r2, [r1] /* Fall through to common code for the remaining logic */ restore: /* * Check what was the reason for mpu reset and store the reason in r9: * 0 - No context lost * 1 - Only L1 and logic lost * 2 - Only L2 lost - In this case, we wont be here * 3 - Both L1 and L2 lost */ ldr r1, pm_pwstctrl_mpu ldr r2, [r1] and r2, r2, #0x3 cmp r2, #0x0 @ Check if target power state was OFF or RET moveq r9, #0x3 @ MPU OFF => L1 and L2 lost movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation bne logic_l1_restore ldr r0, l2dis_3630 cmp r0, #0x1 @ should we disable L2 on 3630? bne skipl2dis mrc p15, 0, r0, c1, c0, 1 bic r0, r0, #2 @ disable L2 cache mcr p15, 0, r0, c1, c0, 1 skipl2dis: ldr r0, control_stat ldr r1, [r0] and r1, #0x700 cmp r1, #0x300 beq l2_inv_gp mov r0, #40 @ set service ID for PPA mov r12, r0 @ copy secure Service ID in r12 mov r1, #0 @ set task id for ROM code in r1 mov r2, #4 @ set some flags in r2, r6 mov r6, #0xff adr r3, l2_inv_api_params @ r3 points to dummy parameters mcr p15, 0, r0, c7, c10, 4 @ data write barrier mcr p15, 0, r0, c7, c10, 5 @ data memory barrier .word 0xE1600071 @ call SMI monitor (smi #1) /* Write to Aux control register to set some bits */ mov r0, #42 @ set service ID for PPA mov r12, r0 @ copy secure Service ID in r12 mov r1, #0 @ set task id for ROM code in r1 mov r2, #4 @ set some flags in r2, r6 mov r6, #0xff ldr r4, scratchpad_base ldr r3, [r4, #0xBC] @ r3 points to parameters mcr p15, 0, r0, c7, c10, 4 @ data write barrier mcr p15, 0, r0, c7, c10, 5 @ data memory barrier .word 0xE1600071 @ call SMI monitor (smi #1) #ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE /* Restore L2 aux control register */ @ set service ID for PPA mov r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID mov r12, r0 @ copy service ID in r12 mov r1, #0 @ set task ID for ROM code in r1 mov r2, #4 @ set some flags in r2, r6 mov r6, #0xff ldr r4, scratchpad_base ldr r3, [r4, #0xBC] adds r3, r3, #8 @ r3 points to parameters mcr p15, 0, r0, c7, c10, 4 @ data write barrier mcr p15, 0, r0, c7, c10, 5 @ data memory barrier .word 0xE1600071 @ call SMI monitor (smi #1) #endif b logic_l1_restore l2_inv_api_params: .word 0x1, 0x00 l2_inv_gp: /* Execute smi to invalidate L2 cache */ mov r12, #0x1 @ set up to invalide L2 smi: .word 0xE1600070 @ Call SMI monitor (smieq) /* Write to Aux control register to set some bits */ ldr r4, scratchpad_base ldr r3, [r4,#0xBC] ldr r0, [r3,#4] mov r12, #0x3 .word 0xE1600070 @ Call SMI monitor (smieq) ldr r4, scratchpad_base ldr r3, [r4,#0xBC] ldr r0, [r3,#12] mov r12, #0x2 .word 0xE1600070 @ Call SMI monitor (smieq) logic_l1_restore: ldr r1, l2dis_3630 cmp r1, #0x1 @ Do we need to re-enable L2 on 3630? bne skipl2reen mrc p15, 0, r1, c1, c0, 1 orr r1, r1, #2 @ re-enable L2 cache mcr p15, 0, r1, c1, c0, 1 skipl2reen: mov r1, #0 /* Invalidate all instruction caches to PoU * and flush branch target cache */ mcr p15, 0, r1, c7, c5, 0 ldr r4, scratchpad_base ldr r3, [r4,#0xBC] adds r3, r3, #16 ldmia r3!, {r4-r6} mov sp, r4 msr spsr_cxsf, r5 mov lr, r6 ldmia r3!, {r4-r9} /* Coprocessor access Control Register */ mcr p15, 0, r4, c1, c0, 2 /* TTBR0 */ MCR p15, 0, r5, c2, c0, 0 /* TTBR1 */ MCR p15, 0, r6, c2, c0, 1 /* Translation table base control register */ MCR p15, 0, r7, c2, c0, 2 /*domain access Control Register */ MCR p15, 0, r8, c3, c0, 0 /* data fault status Register */ MCR p15, 0, r9, c5, c0, 0 ldmia r3!,{r4-r8} /* instruction fault status Register */ MCR p15, 0, r4, c5, c0, 1 /*Data Auxiliary Fault Status Register */ MCR p15, 0, r5, c5, c1, 0 /*Instruction Auxiliary Fault Status Register*/ MCR p15, 0, r6, c5, c1, 1 /*Data Fault Address Register */ MCR p15, 0, r7, c6, c0, 0 /*Instruction Fault Address Register*/ MCR p15, 0, r8, c6, c0, 2 ldmia r3!,{r4-r7} /* user r/w thread and process ID */ MCR p15, 0, r4, c13, c0, 2 /* user ro thread and process ID */ MCR p15, 0, r5, c13, c0, 3 /*Privileged only thread and process ID */ MCR p15, 0, r6, c13, c0, 4 /* cache size selection */ MCR p15, 2, r7, c0, c0, 0 ldmia r3!,{r4-r8} /* Data TLB lockdown registers */ MCR p15, 0, r4, c10, c0, 0 /* Instruction TLB lockdown registers */ MCR p15, 0, r5, c10, c0, 1 /* Secure or Nonsecure Vector Base Address */ MCR p15, 0, r6, c12, c0, 0 /* FCSE PID */ MCR p15, 0, r7, c13, c0, 0 /* Context PID */ MCR p15, 0, r8, c13, c0, 1 ldmia r3!,{r4-r5} /* primary memory remap register */ MCR p15, 0, r4, c10, c2, 0 /*normal memory remap register */ MCR p15, 0, r5, c10, c2, 1 /* Restore cpsr */ ldmia r3!,{r4} /*load CPSR from SDRAM*/ msr cpsr, r4 /*store cpsr */ /* Enabling MMU here */ mrc p15, 0, r7, c2, c0, 2 /* Read TTBRControl */ /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/ and r7, #0x7 cmp r7, #0x0 beq usettbr0 ttbr_error: /* More work needs to be done to support N[0:2] value other than 0 * So looping here so that the error can be detected */ b ttbr_error usettbr0: mrc p15, 0, r2, c2, c0, 0 ldr r5, ttbrbit_mask and r2, r5 mov r4, pc ldr r5, table_index_mask and r4, r5 /* r4 = 31 to 20 bits of pc */ /* Extract the value to be written to table entry */ ldr r1, table_entry add r1, r1, r4 /* r1 has value to be written to table entry*/ /* Getting the address of table entry to modify */ lsr r4, #18 add r2, r4 /* r2 has the location which needs to be modified */ /* Storing previous entry of location being modified */ ldr r5, scratchpad_base ldr r4, [r2] str r4, [r5, #0xC0] /* Modify the table entry */ str r1, [r2] /* Storing address of entry being modified * - will be restored after enabling MMU */ ldr r5, scratchpad_base str r2, [r5, #0xC4] mov r0, #0 mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB /* Restore control register but dont enable caches here*/ /* Caches will be enabled after restoring MMU table entry */ ldmia r3!, {r4} /* Store previous value of control register in scratchpad */ str r4, [r5, #0xC8] ldr r2, cache_pred_disable_mask and r4, r2 mcr p15, 0, r4, c1, c0, 0 /* * ============================== * == Exit point from OFF mode == * ============================== */ ldmfd sp!, {r0-r12, pc} @ restore regs and return /* * Internal functions */ .text ENTRY(es3_sdrc_fix) ldr r4, sdrc_syscfg @ get config addr ldr r5, [r4] @ get value tst r5, #0x100 @ is part access blocked it eq biceq r5, r5, #0x100 @ clear bit if set str r5, [r4] @ write back change ldr r4, sdrc_mr_0 @ get config addr ldr r5, [r4] @ get value str r5, [r4] @ write back change ldr r4, sdrc_emr2_0 @ get config addr ldr r5, [r4] @ get value str r5, [r4] @ write back change ldr r4, sdrc_manual_0 @ get config addr mov r5, #0x2 @ autorefresh command str r5, [r4] @ kick off refreshes ldr r4, sdrc_mr_1 @ get config addr ldr r5, [r4] @ get value str r5, [r4] @ write back change ldr r4, sdrc_emr2_1 @ get config addr ldr r5, [r4] @ get value str r5, [r4] @ write back change ldr r4, sdrc_manual_1 @ get config addr mov r5, #0x2 @ autorefresh command str r5, [r4] @ kick off refreshes bx lr sdrc_syscfg: .word SDRC_SYSCONFIG_P sdrc_mr_0: .word SDRC_MR_0_P sdrc_emr2_0: .word SDRC_EMR2_0_P sdrc_manual_0: .word SDRC_MANUAL_0_P sdrc_mr_1: .word SDRC_MR_1_P sdrc_emr2_1: .word SDRC_EMR2_1_P sdrc_manual_1: .word SDRC_MANUAL_1_P ENTRY(es3_sdrc_fix_sz) .word . - es3_sdrc_fix /* Make sure SDRC accesses are ok */ wait_sdrc_ok: /* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this. */ ldr r4, cm_idlest_ckgen wait_dpll3_lock: ldr r5, [r4] tst r5, #1 beq wait_dpll3_lock ldr r4, cm_idlest1_core wait_sdrc_ready: ldr r5, [r4] tst r5, #0x2 bne wait_sdrc_ready /* allow DLL powerdown upon hw idle req */ ldr r4, sdrc_power ldr r5, [r4] bic r5, r5, #0x40 str r5, [r4] is_dll_in_lock_mode: /* Is dll in lock mode? */ ldr r4, sdrc_dlla_ctrl ldr r5, [r4] tst r5, #0x4 bxne lr /* wait till dll locks */ wait_dll_lock_timed: ldr r4, wait_dll_lock_counter add r4, r4, #1 str r4, wait_dll_lock_counter ldr r4, sdrc_dlla_status mov r6, #8 /* Wait 20uS for lock */ wait_dll_lock: subs r6, r6, #0x1 beq kick_dll ldr r5, [r4] and r5, r5, #0x4 cmp r5, #0x4 bne wait_dll_lock bx lr /* disable/reenable DLL if not locked */ kick_dll: ldr r4, sdrc_dlla_ctrl ldr r5, [r4] mov r6, r5 bic r6, #(1<<3) /* disable dll */ str r6, [r4] dsb orr r6, r6, #(1<<3) /* enable dll */ str r6, [r4] dsb ldr r4, kick_counter add r4, r4, #1 str r4, kick_counter b wait_dll_lock_timed cm_idlest1_core: .word CM_IDLEST1_CORE_V cm_idlest_ckgen: .word CM_IDLEST_CKGEN_V sdrc_dlla_status: .word SDRC_DLLA_STATUS_V sdrc_dlla_ctrl: .word SDRC_DLLA_CTRL_V pm_prepwstst_core_p: .word PM_PREPWSTST_CORE_P pm_pwstctrl_mpu: .word PM_PWSTCTRL_MPU_P scratchpad_base: .word SCRATCHPAD_BASE_P sram_base: .word SRAM_BASE_P + 0x8000 sdrc_power: .word SDRC_POWER_V ttbrbit_mask: .word 0xFFFFC000 table_index_mask: .word 0xFFF00000 table_entry: .word 0x00000C02 cache_pred_disable_mask: .word 0xFFFFE7FB control_stat: .word CONTROL_STAT control_mem_rta: .word CONTROL_MEM_RTA_CTRL kernel_flush: .word v7_flush_dcache_all l2dis_3630: .word 0 /* * When exporting to userspace while the counters are in SRAM, * these 2 words need to be at the end to facilitate retrival! */ kick_counter: .word 0 wait_dll_lock_counter: .word 0 ENTRY(omap34xx_cpu_suspend_sz) .word . - omap34xx_cpu_suspend