/* * wm8958-dsp2.c -- WM8958 DSP2 support * * Copyright 2011 Wolfson Microelectronics plc * * Author: Mark Brown * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "wm8994.h" #define WM_FW_BLOCK_INFO 0xff #define WM_FW_BLOCK_PM 0x00 #define WM_FW_BLOCK_X 0x01 #define WM_FW_BLOCK_Y 0x02 #define WM_FW_BLOCK_Z 0x03 #define WM_FW_BLOCK_I 0x06 #define WM_FW_BLOCK_A 0x08 #define WM_FW_BLOCK_C 0x0c static int wm8958_dsp2_fw(struct snd_soc_codec *codec, const char *name, const struct firmware *fw, bool check) { struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); u64 data64; u32 data32; const u8 *data; char *str; size_t block_len, len; int ret = 0; /* Suppress unneeded downloads */ if (wm8994->cur_fw == fw) return 0; if (fw->size < 32) { dev_err(codec->dev, "%s: firmware too short\n", name); goto err; } if (memcmp(fw->data, "WMFW", 4) != 0) { dev_err(codec->dev, "%s: firmware has bad file magic %08x\n", name, data32); goto err; } memcpy(&data32, fw->data + 4, sizeof(data32)); len = be32_to_cpu(data32); memcpy(&data32, fw->data + 8, sizeof(data32)); data32 = be32_to_cpu(data32); if ((data32 >> 24) & 0xff) { dev_err(codec->dev, "%s: unsupported firmware version %d\n", name, (data32 >> 24) & 0xff); goto err; } if ((data32 & 0xffff) != 8958) { dev_err(codec->dev, "%s: unsupported target device %d\n", name, data32 & 0xffff); goto err; } if (((data32 >> 16) & 0xff) != 0xc) { dev_err(codec->dev, "%s: unsupported target core %d\n", name, (data32 >> 16) & 0xff); goto err; } if (check) { memcpy(&data64, fw->data + 24, sizeof(u64)); dev_info(codec->dev, "%s timestamp %llx\n", name, be64_to_cpu(data64)); } else { snd_soc_write(codec, 0x102, 0x2); snd_soc_write(codec, 0x900, 0x2); } data = fw->data + len; len = fw->size - len; while (len) { if (len < 12) { dev_err(codec->dev, "%s short data block of %d\n", name, len); goto err; } memcpy(&data32, data + 4, sizeof(data32)); block_len = be32_to_cpu(data32); if (block_len + 8 > len) { dev_err(codec->dev, "%d byte block longer than file\n", block_len); goto err; } if (block_len == 0) { dev_err(codec->dev, "Zero length block\n"); goto err; } memcpy(&data32, data, sizeof(data32)); data32 = be32_to_cpu(data32); switch ((data32 >> 24) & 0xff) { case WM_FW_BLOCK_INFO: /* Informational text */ if (!check) break; str = kzalloc(block_len + 1, GFP_KERNEL); if (str) { memcpy(str, data + 8, block_len); dev_info(codec->dev, "%s: %s\n", name, str); kfree(str); } else { dev_err(codec->dev, "Out of memory\n"); } break; case WM_FW_BLOCK_PM: case WM_FW_BLOCK_X: case WM_FW_BLOCK_Y: case WM_FW_BLOCK_Z: case WM_FW_BLOCK_I: case WM_FW_BLOCK_A: case WM_FW_BLOCK_C: dev_dbg(codec->dev, "%s: %d bytes of %x@%x\n", name, block_len, (data32 >> 24) & 0xff, data32 & 0xffffff); if (check) break; data32 &= 0xffffff; wm8994_bulk_write(codec->control_data, data32 & 0xffffff, block_len / 2, (void *)(data + 8)); break; default: dev_warn(codec->dev, "%s: unknown block type %d\n", name, (data32 >> 24) & 0xff); break; } /* Round up to the next 32 bit word */ block_len += block_len % 4; data += block_len + 8; len -= block_len + 8; } if (!check) { dev_dbg(codec->dev, "%s: download done\n", name); wm8994->cur_fw = fw; } else { dev_info(codec->dev, "%s: got firmware\n", name); } goto ok; err: ret = -EINVAL; ok: if (!check) { snd_soc_write(codec, 0x900, 0x0); snd_soc_write(codec, 0x102, 0x0); } return ret; } static void wm8958_dsp_start_mbc(struct snd_soc_codec *codec, int path) { struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); struct wm8994_pdata *pdata = wm8994->pdata; int i; /* If the DSP is already running then noop */ if (snd_soc_read(codec, WM8958_DSP2_PROGRAM) & WM8958_DSP2_ENA) return; /* If we have MBC firmware download it */ if (wm8994->mbc) wm8958_dsp2_fw(codec, "MBC", wm8994->mbc, false); snd_soc_update_bits(codec, WM8958_DSP2_PROGRAM, WM8958_DSP2_ENA, WM8958_DSP2_ENA); /* If we've got user supplied MBC settings use them */ if (pdata && pdata->num_mbc_cfgs) { struct wm8958_mbc_cfg *cfg = &pdata->mbc_cfgs[wm8994->mbc_cfg]; for (i = 0; i < ARRAY_SIZE(cfg->coeff_regs); i++) snd_soc_write(codec, i + WM8958_MBC_BAND_1_K_1, cfg->coeff_regs[i]); for (i = 0; i < ARRAY_SIZE(cfg->cutoff_regs); i++) snd_soc_write(codec, i + WM8958_MBC_BAND_2_LOWER_CUTOFF_C1_1, cfg->cutoff_regs[i]); } /* Run the DSP */ snd_soc_write(codec, WM8958_DSP2_EXECCONTROL, WM8958_DSP2_RUNR); /* And we're off! */ snd_soc_update_bits(codec, WM8958_DSP2_CONFIG, WM8958_MBC_ENA | WM8958_MBC_SEL_MASK, path << WM8958_MBC_SEL_SHIFT | WM8958_MBC_ENA); } static void wm8958_dsp_apply(struct snd_soc_codec *codec, int path, int start) { struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); int pwr_reg = snd_soc_read(codec, WM8994_POWER_MANAGEMENT_5); int ena, reg, aif; switch (path) { case 0: pwr_reg &= (WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA); aif = 0; break; case 1: pwr_reg &= (WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA); aif = 0; break; case 2: pwr_reg &= (WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA); aif = 1; break; default: BUG(); return; } /* Do we have both an active AIF and an active algorithm? */ ena = wm8994->mbc_ena[path]; if (!pwr_reg) ena = 0; reg = snd_soc_read(codec, WM8958_DSP2_PROGRAM); dev_dbg(codec->dev, "DSP path %d %d startup: %d, power: %x, DSP: %x\n", path, wm8994->dsp_active, start, pwr_reg, reg); if (start && ena) { /* If either AIFnCLK is not yet enabled postpone */ if (!(snd_soc_read(codec, WM8994_AIF1_CLOCKING_1) & WM8994_AIF1CLK_ENA_MASK) && !(snd_soc_read(codec, WM8994_AIF2_CLOCKING_1) & WM8994_AIF2CLK_ENA_MASK)) return; /* Switch the clock over to the appropriate AIF */ snd_soc_update_bits(codec, WM8994_CLOCKING_1, WM8958_DSP2CLK_SRC | WM8958_DSP2CLK_ENA, aif << WM8958_DSP2CLK_SRC_SHIFT | WM8958_DSP2CLK_ENA); if (wm8994->mbc_ena[path]) wm8958_dsp_start_mbc(codec, path); dev_dbg(codec->dev, "DSP running\n"); } else { /* If the DSP is already stopped then noop */ if (!(reg & WM8958_DSP2_ENA)) return; snd_soc_update_bits(codec, WM8958_DSP2_CONFIG, WM8958_MBC_ENA, 0); snd_soc_write(codec, WM8958_DSP2_EXECCONTROL, WM8958_DSP2_STOP); snd_soc_update_bits(codec, WM8958_DSP2_PROGRAM, WM8958_DSP2_ENA, 0); snd_soc_update_bits(codec, WM8994_CLOCKING_1, WM8958_DSP2CLK_ENA, 0); wm8994->dsp_active = -1; dev_dbg(codec->dev, "DSP stopped\n"); } } int wm8958_aif_ev(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_codec *codec = w->codec; int i; switch (event) { case SND_SOC_DAPM_POST_PMU: case SND_SOC_DAPM_PRE_PMU: for (i = 0; i < 3; i++) wm8958_dsp_apply(codec, i, 1); break; case SND_SOC_DAPM_POST_PMD: case SND_SOC_DAPM_PRE_PMD: for (i = 0; i < 3; i++) wm8958_dsp_apply(codec, i, 0); break; } return 0; } /* Check if DSP2 is in use on another AIF */ static int wm8958_dsp2_busy(struct wm8994_priv *wm8994, int aif) { int i; for (i = 0; i < ARRAY_SIZE(wm8994->mbc_ena); i++) { if (i == aif) continue; if (wm8994->mbc_ena[i]) return 1; } return 0; } static int wm8958_put_mbc_enum(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); struct wm8994_pdata *pdata = wm8994->pdata; int value = ucontrol->value.integer.value[0]; int reg; /* Don't allow on the fly reconfiguration */ reg = snd_soc_read(codec, WM8994_CLOCKING_1); if (reg < 0 || reg & WM8958_DSP2CLK_ENA) return -EBUSY; if (value >= pdata->num_mbc_cfgs) return -EINVAL; wm8994->mbc_cfg = value; return 0; } static int wm8958_get_mbc_enum(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); ucontrol->value.enumerated.item[0] = wm8994->mbc_cfg; return 0; } static int wm8958_mbc_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; uinfo->count = 1; uinfo->value.integer.min = 0; uinfo->value.integer.max = 1; return 0; } static int wm8958_mbc_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { int mbc = kcontrol->private_value; struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); ucontrol->value.integer.value[0] = wm8994->mbc_ena[mbc]; return 0; } static int wm8958_mbc_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { int mbc = kcontrol->private_value; struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); if (ucontrol->value.integer.value[0] > 1) return -EINVAL; if (wm8958_dsp2_busy(wm8994, mbc)) { dev_dbg(codec->dev, "DSP2 active on %d already\n", mbc); return -EBUSY; } wm8994->mbc_ena[mbc] = ucontrol->value.integer.value[0]; wm8958_dsp_apply(codec, mbc, wm8994->mbc_ena[mbc]); return 0; } #define WM8958_MBC_SWITCH(xname, xval) {\ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,\ .info = wm8958_mbc_info, \ .get = wm8958_mbc_get, .put = wm8958_mbc_put, \ .private_value = xval } static const struct snd_kcontrol_new wm8958_mbc_snd_controls[] = { WM8958_MBC_SWITCH("AIF1DAC1 MBC Switch", 0), WM8958_MBC_SWITCH("AIF1DAC2 MBC Switch", 1), WM8958_MBC_SWITCH("AIF2DAC MBC Switch", 2), }; static void wm8958_mbc_loaded(const struct firmware *fw, void *context) { struct snd_soc_codec *codec = context; struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); if (fw && wm8958_dsp2_fw(codec, "MBC", fw, true) != 0) { mutex_lock(&codec->mutex); wm8994->mbc = fw; mutex_unlock(&codec->mutex); } } void wm8958_dsp2_init(struct snd_soc_codec *codec) { struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); struct wm8994_pdata *pdata = wm8994->pdata; int ret, i; wm8994->dsp_active = -1; snd_soc_add_controls(codec, wm8958_mbc_snd_controls, ARRAY_SIZE(wm8958_mbc_snd_controls)); /* We don't *require* firmware and don't want to delay boot */ request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, "wm8958_mbc.wfw", codec->dev, GFP_KERNEL, codec, wm8958_mbc_loaded); if (!pdata) return; if (pdata->num_mbc_cfgs) { struct snd_kcontrol_new control[] = { SOC_ENUM_EXT("MBC Mode", wm8994->mbc_enum, wm8958_get_mbc_enum, wm8958_put_mbc_enum), }; /* We need an array of texts for the enum API */ wm8994->mbc_texts = kmalloc(sizeof(char *) * pdata->num_mbc_cfgs, GFP_KERNEL); if (!wm8994->mbc_texts) { dev_err(wm8994->codec->dev, "Failed to allocate %d MBC config texts\n", pdata->num_mbc_cfgs); return; } for (i = 0; i < pdata->num_mbc_cfgs; i++) wm8994->mbc_texts[i] = pdata->mbc_cfgs[i].name; wm8994->mbc_enum.max = pdata->num_mbc_cfgs; wm8994->mbc_enum.texts = wm8994->mbc_texts; ret = snd_soc_add_controls(wm8994->codec, control, 1); if (ret != 0) dev_err(wm8994->codec->dev, "Failed to add MBC mode controls: %d\n", ret); } }