/* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License, version 2, as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Copyright 2011 Paul Mackerras, IBM Corp. * * Derived from book3s_rmhandlers.S and other files, which are: * * Copyright SUSE Linux Products GmbH 2009 * * Authors: Alexander Graf */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* Sign-extend HDEC if not on POWER9 */ #define EXTEND_HDEC(reg) \ BEGIN_FTR_SECTION; \ extsw reg, reg; \ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300) #define VCPU_GPRS_TM(reg) (((reg) * ULONG_SIZE) + VCPU_GPR_TM) /* Values in HSTATE_NAPPING(r13) */ #define NAPPING_CEDE 1 #define NAPPING_NOVCPU 2 /* Stack frame offsets for kvmppc_hv_entry */ #define SFS 160 #define STACK_SLOT_TRAP (SFS-4) #define STACK_SLOT_TID (SFS-16) #define STACK_SLOT_PSSCR (SFS-24) #define STACK_SLOT_PID (SFS-32) #define STACK_SLOT_IAMR (SFS-40) #define STACK_SLOT_CIABR (SFS-48) #define STACK_SLOT_DAWR (SFS-56) #define STACK_SLOT_DAWRX (SFS-64) #define STACK_SLOT_HFSCR (SFS-72) /* * Call kvmppc_hv_entry in real mode. * Must be called with interrupts hard-disabled. * * Input Registers: * * LR = return address to continue at after eventually re-enabling MMU */ _GLOBAL_TOC(kvmppc_hv_entry_trampoline) mflr r0 std r0, PPC_LR_STKOFF(r1) stdu r1, -112(r1) mfmsr r10 std r10, HSTATE_HOST_MSR(r13) LOAD_REG_ADDR(r5, kvmppc_call_hv_entry) li r0,MSR_RI andc r0,r10,r0 li r6,MSR_IR | MSR_DR andc r6,r10,r6 mtmsrd r0,1 /* clear RI in MSR */ mtsrr0 r5 mtsrr1 r6 RFI_TO_KERNEL kvmppc_call_hv_entry: BEGIN_FTR_SECTION /* On P9, do LPCR setting, if necessary */ ld r3, HSTATE_SPLIT_MODE(r13) cmpdi r3, 0 beq 46f lwz r4, KVM_SPLIT_DO_SET(r3) cmpwi r4, 0 beq 46f bl kvmhv_p9_set_lpcr nop 46: END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) ld r4, HSTATE_KVM_VCPU(r13) bl kvmppc_hv_entry /* Back from guest - restore host state and return to caller */ BEGIN_FTR_SECTION /* Restore host DABR and DABRX */ ld r5,HSTATE_DABR(r13) li r6,7 mtspr SPRN_DABR,r5 mtspr SPRN_DABRX,r6 END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S) /* Restore SPRG3 */ ld r3,PACA_SPRG_VDSO(r13) mtspr SPRN_SPRG_VDSO_WRITE,r3 /* Reload the host's PMU registers */ lbz r4, PACA_PMCINUSE(r13) /* is the host using the PMU? */ cmpwi r4, 0 beq 23f /* skip if not */ BEGIN_FTR_SECTION ld r3, HSTATE_MMCR0(r13) andi. r4, r3, MMCR0_PMAO_SYNC | MMCR0_PMAO cmpwi r4, MMCR0_PMAO beql kvmppc_fix_pmao END_FTR_SECTION_IFSET(CPU_FTR_PMAO_BUG) lwz r3, HSTATE_PMC1(r13) lwz r4, HSTATE_PMC2(r13) lwz r5, HSTATE_PMC3(r13) lwz r6, HSTATE_PMC4(r13) lwz r8, HSTATE_PMC5(r13) lwz r9, HSTATE_PMC6(r13) mtspr SPRN_PMC1, r3 mtspr SPRN_PMC2, r4 mtspr SPRN_PMC3, r5 mtspr SPRN_PMC4, r6 mtspr SPRN_PMC5, r8 mtspr SPRN_PMC6, r9 ld r3, HSTATE_MMCR0(r13) ld r4, HSTATE_MMCR1(r13) ld r5, HSTATE_MMCRA(r13) ld r6, HSTATE_SIAR(r13) ld r7, HSTATE_SDAR(r13) mtspr SPRN_MMCR1, r4 mtspr SPRN_MMCRA, r5 mtspr SPRN_SIAR, r6 mtspr SPRN_SDAR, r7 BEGIN_FTR_SECTION ld r8, HSTATE_MMCR2(r13) ld r9, HSTATE_SIER(r13) mtspr SPRN_MMCR2, r8 mtspr SPRN_SIER, r9 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) mtspr SPRN_MMCR0, r3 isync 23: /* * Reload DEC. HDEC interrupts were disabled when * we reloaded the host's LPCR value. */ ld r3, HSTATE_DECEXP(r13) mftb r4 subf r4, r4, r3 mtspr SPRN_DEC, r4 /* hwthread_req may have got set by cede or no vcpu, so clear it */ li r0, 0 stb r0, HSTATE_HWTHREAD_REQ(r13) /* * For external interrupts we need to call the Linux * handler to process the interrupt. We do that by jumping * to absolute address 0x500 for external interrupts. * The [h]rfid at the end of the handler will return to * the book3s_hv_interrupts.S code. For other interrupts * we do the rfid to get back to the book3s_hv_interrupts.S * code here. */ ld r8, 112+PPC_LR_STKOFF(r1) addi r1, r1, 112 ld r7, HSTATE_HOST_MSR(r13) /* Return the trap number on this thread as the return value */ mr r3, r12 /* * If we came back from the guest via a relocation-on interrupt, * we will be in virtual mode at this point, which makes it a * little easier to get back to the caller. */ mfmsr r0 andi. r0, r0, MSR_IR /* in real mode? */ bne .Lvirt_return /* RFI into the highmem handler */ mfmsr r6 li r0, MSR_RI andc r6, r6, r0 mtmsrd r6, 1 /* Clear RI in MSR */ mtsrr0 r8 mtsrr1 r7 RFI_TO_KERNEL /* Virtual-mode return */ .Lvirt_return: mtlr r8 blr kvmppc_primary_no_guest: /* We handle this much like a ceded vcpu */ /* put the HDEC into the DEC, since HDEC interrupts don't wake us */ /* HDEC may be larger than DEC for arch >= v3.00, but since the */ /* HDEC value came from DEC in the first place, it will fit */ mfspr r3, SPRN_HDEC mtspr SPRN_DEC, r3 /* * Make sure the primary has finished the MMU switch. * We should never get here on a secondary thread, but * check it for robustness' sake. */ ld r5, HSTATE_KVM_VCORE(r13) 65: lbz r0, VCORE_IN_GUEST(r5) cmpwi r0, 0 beq 65b /* Set LPCR. */ ld r8,VCORE_LPCR(r5) mtspr SPRN_LPCR,r8 isync /* set our bit in napping_threads */ ld r5, HSTATE_KVM_VCORE(r13) lbz r7, HSTATE_PTID(r13) li r0, 1 sld r0, r0, r7 addi r6, r5, VCORE_NAPPING_THREADS 1: lwarx r3, 0, r6 or r3, r3, r0 stwcx. r3, 0, r6 bne 1b /* order napping_threads update vs testing entry_exit_map */ isync li r12, 0 lwz r7, VCORE_ENTRY_EXIT(r5) cmpwi r7, 0x100 bge kvm_novcpu_exit /* another thread already exiting */ li r3, NAPPING_NOVCPU stb r3, HSTATE_NAPPING(r13) li r3, 0 /* Don't wake on privileged (OS) doorbell */ b kvm_do_nap /* * kvm_novcpu_wakeup * Entered from kvm_start_guest if kvm_hstate.napping is set * to NAPPING_NOVCPU * r2 = kernel TOC * r13 = paca */ kvm_novcpu_wakeup: ld r1, HSTATE_HOST_R1(r13) ld r5, HSTATE_KVM_VCORE(r13) li r0, 0 stb r0, HSTATE_NAPPING(r13) /* check the wake reason */ bl kvmppc_check_wake_reason /* * Restore volatile registers since we could have called * a C routine in kvmppc_check_wake_reason. * r5 = VCORE */ ld r5, HSTATE_KVM_VCORE(r13) /* see if any other thread is already exiting */ lwz r0, VCORE_ENTRY_EXIT(r5) cmpwi r0, 0x100 bge kvm_novcpu_exit /* clear our bit in napping_threads */ lbz r7, HSTATE_PTID(r13) li r0, 1 sld r0, r0, r7 addi r6, r5, VCORE_NAPPING_THREADS 4: lwarx r7, 0, r6 andc r7, r7, r0 stwcx. r7, 0, r6 bne 4b /* See if the wake reason means we need to exit */ cmpdi r3, 0 bge kvm_novcpu_exit /* See if our timeslice has expired (HDEC is negative) */ mfspr r0, SPRN_HDEC EXTEND_HDEC(r0) li r12, BOOK3S_INTERRUPT_HV_DECREMENTER cmpdi r0, 0 blt kvm_novcpu_exit /* Got an IPI but other vcpus aren't yet exiting, must be a latecomer */ ld r4, HSTATE_KVM_VCPU(r13) cmpdi r4, 0 beq kvmppc_primary_no_guest #ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING addi r3, r4, VCPU_TB_RMENTRY bl kvmhv_start_timing #endif b kvmppc_got_guest kvm_novcpu_exit: #ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING ld r4, HSTATE_KVM_VCPU(r13) cmpdi r4, 0 beq 13f addi r3, r4, VCPU_TB_RMEXIT bl kvmhv_accumulate_time #endif 13: mr r3, r12 stw r12, STACK_SLOT_TRAP(r1) bl kvmhv_commence_exit nop b kvmhv_switch_to_host /* * We come in here when wakened from nap mode. * Relocation is off and most register values are lost. * r13 points to the PACA. * r3 contains the SRR1 wakeup value, SRR1 is trashed. */ .globl kvm_start_guest kvm_start_guest: /* Set runlatch bit the minute you wake up from nap */ mfspr r0, SPRN_CTRLF ori r0, r0, 1 mtspr SPRN_CTRLT, r0 /* * Could avoid this and pass it through in r3. For now, * code expects it to be in SRR1. */ mtspr SPRN_SRR1,r3 ld r2,PACATOC(r13) li r0,KVM_HWTHREAD_IN_KVM stb r0,HSTATE_HWTHREAD_STATE(r13) /* NV GPR values from power7_idle() will no longer be valid */ li r0,1 stb r0,PACA_NAPSTATELOST(r13) /* were we napping due to cede? */ lbz r0,HSTATE_NAPPING(r13) cmpwi r0,NAPPING_CEDE beq kvm_end_cede cmpwi r0,NAPPING_NOVCPU beq kvm_novcpu_wakeup ld r1,PACAEMERGSP(r13) subi r1,r1,STACK_FRAME_OVERHEAD /* * We weren't napping due to cede, so this must be a secondary * thread being woken up to run a guest, or being woken up due * to a stray IPI. (Or due to some machine check or hypervisor * maintenance interrupt while the core is in KVM.) */ /* Check the wake reason in SRR1 to see why we got here */ bl kvmppc_check_wake_reason /* * kvmppc_check_wake_reason could invoke a C routine, but we * have no volatile registers to restore when we return. */ cmpdi r3, 0 bge kvm_no_guest /* get vcore pointer, NULL if we have nothing to run */ ld r5,HSTATE_KVM_VCORE(r13) cmpdi r5,0 /* if we have no vcore to run, go back to sleep */ beq kvm_no_guest kvm_secondary_got_guest: /* Set HSTATE_DSCR(r13) to something sensible */ ld r6, PACA_DSCR_DEFAULT(r13) std r6, HSTATE_DSCR(r13) /* On thread 0 of a subcore, set HDEC to max */ lbz r4, HSTATE_PTID(r13) cmpwi r4, 0 bne 63f LOAD_REG_ADDR(r6, decrementer_max) ld r6, 0(r6) mtspr SPRN_HDEC, r6 /* and set per-LPAR registers, if doing dynamic micro-threading */ ld r6, HSTATE_SPLIT_MODE(r13) cmpdi r6, 0 beq 63f BEGIN_FTR_SECTION ld r0, KVM_SPLIT_RPR(r6) mtspr SPRN_RPR, r0 ld r0, KVM_SPLIT_PMMAR(r6) mtspr SPRN_PMMAR, r0 ld r0, KVM_SPLIT_LDBAR(r6) mtspr SPRN_LDBAR, r0 isync FTR_SECTION_ELSE /* On P9 we use the split_info for coordinating LPCR changes */ lwz r4, KVM_SPLIT_DO_SET(r6) cmpwi r4, 0 beq 1f mr r3, r6 bl kvmhv_p9_set_lpcr nop 1: ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_300) 63: /* Order load of vcpu after load of vcore */ lwsync ld r4, HSTATE_KVM_VCPU(r13) bl kvmppc_hv_entry /* Back from the guest, go back to nap */ /* Clear our vcpu and vcore pointers so we don't come back in early */ li r0, 0 std r0, HSTATE_KVM_VCPU(r13) /* * Once we clear HSTATE_KVM_VCORE(r13), the code in * kvmppc_run_core() is going to assume that all our vcpu * state is visible in memory. This lwsync makes sure * that that is true. */ lwsync std r0, HSTATE_KVM_VCORE(r13) /* * All secondaries exiting guest will fall through this path. * Before proceeding, just check for HMI interrupt and * invoke opal hmi handler. By now we are sure that the * primary thread on this core/subcore has already made partition * switch/TB resync and we are good to call opal hmi handler. */ cmpwi r12, BOOK3S_INTERRUPT_HMI bne kvm_no_guest li r3,0 /* NULL argument */ bl hmi_exception_realmode /* * At this point we have finished executing in the guest. * We need to wait for hwthread_req to become zero, since * we may not turn on the MMU while hwthread_req is non-zero. * While waiting we also need to check if we get given a vcpu to run. */ kvm_no_guest: lbz r3, HSTATE_HWTHREAD_REQ(r13) cmpwi r3, 0 bne 53f HMT_MEDIUM li r0, KVM_HWTHREAD_IN_KERNEL stb r0, HSTATE_HWTHREAD_STATE(r13) /* need to recheck hwthread_req after a barrier, to avoid race */ sync lbz r3, HSTATE_HWTHREAD_REQ(r13) cmpwi r3, 0 bne 54f /* * We jump to pnv_wakeup_loss, which will return to the caller * of power7_nap in the powernv cpu offline loop. The value we * put in r3 becomes the return value for power7_nap. pnv_wakeup_loss * requires SRR1 in r12. */ li r3, LPCR_PECE0 mfspr r4, SPRN_LPCR rlwimi r4, r3, 0, LPCR_PECE0 | LPCR_PECE1 mtspr SPRN_LPCR, r4 li r3, 0 mfspr r12,SPRN_SRR1 b pnv_wakeup_loss 53: HMT_LOW ld r5, HSTATE_KVM_VCORE(r13) cmpdi r5, 0 bne 60f ld r3, HSTATE_SPLIT_MODE(r13) cmpdi r3, 0 beq kvm_no_guest lwz r0, KVM_SPLIT_DO_SET(r3) cmpwi r0, 0 bne kvmhv_do_set lwz r0, KVM_SPLIT_DO_RESTORE(r3) cmpwi r0, 0 bne kvmhv_do_restore lbz r0, KVM_SPLIT_DO_NAP(r3) cmpwi r0, 0 beq kvm_no_guest HMT_MEDIUM b kvm_unsplit_nap 60: HMT_MEDIUM b kvm_secondary_got_guest 54: li r0, KVM_HWTHREAD_IN_KVM stb r0, HSTATE_HWTHREAD_STATE(r13) b kvm_no_guest kvmhv_do_set: /* Set LPCR, LPIDR etc. on P9 */ HMT_MEDIUM bl kvmhv_p9_set_lpcr nop b kvm_no_guest kvmhv_do_restore: HMT_MEDIUM bl kvmhv_p9_restore_lpcr nop b kvm_no_guest /* * Here the primary thread is trying to return the core to * whole-core mode, so we need to nap. */ kvm_unsplit_nap: /* * When secondaries are napping in kvm_unsplit_nap() with * hwthread_req = 1, HMI goes ignored even though subcores are * already exited the guest. Hence HMI keeps waking up secondaries * from nap in a loop and secondaries always go back to nap since * no vcore is assigned to them. This makes impossible for primary * thread to get hold of secondary threads resulting into a soft * lockup in KVM path. * * Let us check if HMI is pending and handle it before we go to nap. */ cmpwi r12, BOOK3S_INTERRUPT_HMI bne 55f li r3, 0 /* NULL argument */ bl hmi_exception_realmode 55: /* * Ensure that secondary doesn't nap when it has * its vcore pointer set. */ sync /* matches smp_mb() before setting split_info.do_nap */ ld r0, HSTATE_KVM_VCORE(r13) cmpdi r0, 0 bne kvm_no_guest /* clear any pending message */ BEGIN_FTR_SECTION lis r6, (PPC_DBELL_SERVER << (63-36))@h PPC_MSGCLR(6) END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) /* Set kvm_split_mode.napped[tid] = 1 */ ld r3, HSTATE_SPLIT_MODE(r13) li r0, 1 lbz r4, HSTATE_TID(r13) addi r4, r4, KVM_SPLIT_NAPPED stbx r0, r3, r4 /* Check the do_nap flag again after setting napped[] */ sync lbz r0, KVM_SPLIT_DO_NAP(r3) cmpwi r0, 0 beq 57f li r3, (LPCR_PECEDH | LPCR_PECE0) >> 4 mfspr r5, SPRN_LPCR rlwimi r5, r3, 4, (LPCR_PECEDP | LPCR_PECEDH | LPCR_PECE0 | LPCR_PECE1) b kvm_nap_sequence 57: li r0, 0 stbx r0, r3, r4 b kvm_no_guest /****************************************************************************** * * * Entry code * * * *****************************************************************************/ .global kvmppc_hv_entry kvmppc_hv_entry: /* Required state: * * R4 = vcpu pointer (or NULL) * MSR = ~IR|DR * R13 = PACA * R1 = host R1 * R2 = TOC * all other volatile GPRS = free * Does not preserve non-volatile GPRs or CR fields */ mflr r0 std r0, PPC_LR_STKOFF(r1) stdu r1, -SFS(r1) /* Save R1 in the PACA */ std r1, HSTATE_HOST_R1(r13) li r6, KVM_GUEST_MODE_HOST_HV stb r6, HSTATE_IN_GUEST(r13) #ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING /* Store initial timestamp */ cmpdi r4, 0 beq 1f addi r3, r4, VCPU_TB_RMENTRY bl kvmhv_start_timing 1: #endif /* Use cr7 as an indication of radix mode */ ld r5, HSTATE_KVM_VCORE(r13) ld r9, VCORE_KVM(r5) /* pointer to struct kvm */ lbz r0, KVM_RADIX(r9) cmpwi cr7, r0, 0 /* * POWER7/POWER8 host -> guest partition switch code. * We don't have to lock against concurrent tlbies, * but we do have to coordinate across hardware threads. */ /* Set bit in entry map iff exit map is zero. */ li r7, 1 lbz r6, HSTATE_PTID(r13) sld r7, r7, r6 addi r8, r5, VCORE_ENTRY_EXIT 21: lwarx r3, 0, r8 cmpwi r3, 0x100 /* any threads starting to exit? */ bge secondary_too_late /* if so we're too late to the party */ or r3, r3, r7 stwcx. r3, 0, r8 bne 21b /* Primary thread switches to guest partition. */ cmpwi r6,0 bne 10f /* Radix has already switched LPID and flushed core TLB */ bne cr7, 22f lwz r7,KVM_LPID(r9) BEGIN_FTR_SECTION ld r6,KVM_SDR1(r9) li r0,LPID_RSVD /* switch to reserved LPID */ mtspr SPRN_LPID,r0 ptesync mtspr SPRN_SDR1,r6 /* switch to partition page table */ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300) mtspr SPRN_LPID,r7 isync /* See if we need to flush the TLB. Hash has to be done in RM */ lhz r6,PACAPACAINDEX(r13) /* test_bit(cpu, need_tlb_flush) */ BEGIN_FTR_SECTION /* * On POWER9, individual threads can come in here, but the * TLB is shared between the 4 threads in a core, hence * invalidating on one thread invalidates for all. * Thus we make all 4 threads use the same bit here. */ clrrdi r6,r6,2 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) clrldi r7,r6,64-6 /* extract bit number (6 bits) */ srdi r6,r6,6 /* doubleword number */ sldi r6,r6,3 /* address offset */ add r6,r6,r9 addi r6,r6,KVM_NEED_FLUSH /* dword in kvm->arch.need_tlb_flush */ li r8,1 sld r8,r8,r7 ld r7,0(r6) and. r7,r7,r8 beq 22f /* Flush the TLB of any entries for this LPID */ lwz r0,KVM_TLB_SETS(r9) mtctr r0 li r7,0x800 /* IS field = 0b10 */ ptesync li r0,0 /* RS for P9 version of tlbiel */ 28: tlbiel r7 /* On P9, rs=0, RIC=0, PRS=0, R=0 */ addi r7,r7,0x1000 bdnz 28b ptesync 23: ldarx r7,0,r6 /* clear the bit after TLB flushed */ andc r7,r7,r8 stdcx. r7,0,r6 bne 23b /* Add timebase offset onto timebase */ 22: ld r8,VCORE_TB_OFFSET(r5) cmpdi r8,0 beq 37f std r8, VCORE_TB_OFFSET_APPL(r5) mftb r6 /* current host timebase */ add r8,r8,r6 mtspr SPRN_TBU40,r8 /* update upper 40 bits */ mftb r7 /* check if lower 24 bits overflowed */ clrldi r6,r6,40 clrldi r7,r7,40 cmpld r7,r6 bge 37f addis r8,r8,0x100 /* if so, increment upper 40 bits */ mtspr SPRN_TBU40,r8 /* Load guest PCR value to select appropriate compat mode */ 37: ld r7, VCORE_PCR(r5) cmpdi r7, 0 beq 38f mtspr SPRN_PCR, r7 38: BEGIN_FTR_SECTION /* DPDES and VTB are shared between threads */ ld r8, VCORE_DPDES(r5) ld r7, VCORE_VTB(r5) mtspr SPRN_DPDES, r8 mtspr SPRN_VTB, r7 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) /* Mark the subcore state as inside guest */ bl kvmppc_subcore_enter_guest nop ld r5, HSTATE_KVM_VCORE(r13) ld r4, HSTATE_KVM_VCPU(r13) li r0,1 stb r0,VCORE_IN_GUEST(r5) /* signal secondaries to continue */ /* Do we have a guest vcpu to run? */ 10: cmpdi r4, 0 beq kvmppc_primary_no_guest kvmppc_got_guest: /* Increment yield count if they have a VPA */ ld r3, VCPU_VPA(r4) cmpdi r3, 0 beq 25f li r6, LPPACA_YIELDCOUNT LWZX_BE r5, r3, r6 addi r5, r5, 1 STWX_BE r5, r3, r6 li r6, 1 stb r6, VCPU_VPA_DIRTY(r4) 25: /* Save purr/spurr */ mfspr r5,SPRN_PURR mfspr r6,SPRN_SPURR std r5,HSTATE_PURR(r13) std r6,HSTATE_SPURR(r13) ld r7,VCPU_PURR(r4) ld r8,VCPU_SPURR(r4) mtspr SPRN_PURR,r7 mtspr SPRN_SPURR,r8 /* Save host values of some registers */ BEGIN_FTR_SECTION mfspr r5, SPRN_TIDR mfspr r6, SPRN_PSSCR mfspr r7, SPRN_PID mfspr r8, SPRN_IAMR std r5, STACK_SLOT_TID(r1) std r6, STACK_SLOT_PSSCR(r1) std r7, STACK_SLOT_PID(r1) std r8, STACK_SLOT_IAMR(r1) mfspr r5, SPRN_HFSCR std r5, STACK_SLOT_HFSCR(r1) END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) BEGIN_FTR_SECTION mfspr r5, SPRN_CIABR mfspr r6, SPRN_DAWR mfspr r7, SPRN_DAWRX std r5, STACK_SLOT_CIABR(r1) std r6, STACK_SLOT_DAWR(r1) std r7, STACK_SLOT_DAWRX(r1) END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) BEGIN_FTR_SECTION /* Set partition DABR */ /* Do this before re-enabling PMU to avoid P7 DABR corruption bug */ lwz r5,VCPU_DABRX(r4) ld r6,VCPU_DABR(r4) mtspr SPRN_DABRX,r5 mtspr SPRN_DABR,r6 isync END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S) #ifdef CONFIG_PPC_TRANSACTIONAL_MEM /* * Branch around the call if both CPU_FTR_TM and * CPU_FTR_P9_TM_HV_ASSIST are off. */ BEGIN_FTR_SECTION b 91f END_FTR_SECTION(CPU_FTR_TM | CPU_FTR_P9_TM_HV_ASSIST, 0) /* * NOTE THAT THIS TRASHES ALL NON-VOLATILE REGISTERS INCLUDING CR */ bl kvmppc_restore_tm 91: #endif /* Load guest PMU registers */ /* R4 is live here (vcpu pointer) */ li r3, 1 sldi r3, r3, 31 /* MMCR0_FC (freeze counters) bit */ mtspr SPRN_MMCR0, r3 /* freeze all counters, disable ints */ isync BEGIN_FTR_SECTION ld r3, VCPU_MMCR(r4) andi. r5, r3, MMCR0_PMAO_SYNC | MMCR0_PMAO cmpwi r5, MMCR0_PMAO beql kvmppc_fix_pmao END_FTR_SECTION_IFSET(CPU_FTR_PMAO_BUG) lwz r3, VCPU_PMC(r4) /* always load up guest PMU registers */ lwz r5, VCPU_PMC + 4(r4) /* to prevent information leak */ lwz r6, VCPU_PMC + 8(r4) lwz r7, VCPU_PMC + 12(r4) lwz r8, VCPU_PMC + 16(r4) lwz r9, VCPU_PMC + 20(r4) mtspr SPRN_PMC1, r3 mtspr SPRN_PMC2, r5 mtspr SPRN_PMC3, r6 mtspr SPRN_PMC4, r7 mtspr SPRN_PMC5, r8 mtspr SPRN_PMC6, r9 ld r3, VCPU_MMCR(r4) ld r5, VCPU_MMCR + 8(r4) ld r6, VCPU_MMCR + 16(r4) ld r7, VCPU_SIAR(r4) ld r8, VCPU_SDAR(r4) mtspr SPRN_MMCR1, r5 mtspr SPRN_MMCRA, r6 mtspr SPRN_SIAR, r7 mtspr SPRN_SDAR, r8 BEGIN_FTR_SECTION ld r5, VCPU_MMCR + 24(r4) ld r6, VCPU_SIER(r4) mtspr SPRN_MMCR2, r5 mtspr SPRN_SIER, r6 BEGIN_FTR_SECTION_NESTED(96) lwz r7, VCPU_PMC + 24(r4) lwz r8, VCPU_PMC + 28(r4) ld r9, VCPU_MMCR + 32(r4) mtspr SPRN_SPMC1, r7 mtspr SPRN_SPMC2, r8 mtspr SPRN_MMCRS, r9 END_FTR_SECTION_NESTED(CPU_FTR_ARCH_300, 0, 96) END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) mtspr SPRN_MMCR0, r3 isync /* Load up FP, VMX and VSX registers */ bl kvmppc_load_fp ld r14, VCPU_GPR(R14)(r4) ld r15, VCPU_GPR(R15)(r4) ld r16, VCPU_GPR(R16)(r4) ld r17, VCPU_GPR(R17)(r4) ld r18, VCPU_GPR(R18)(r4) ld r19, VCPU_GPR(R19)(r4) ld r20, VCPU_GPR(R20)(r4) ld r21, VCPU_GPR(R21)(r4) ld r22, VCPU_GPR(R22)(r4) ld r23, VCPU_GPR(R23)(r4) ld r24, VCPU_GPR(R24)(r4) ld r25, VCPU_GPR(R25)(r4) ld r26, VCPU_GPR(R26)(r4) ld r27, VCPU_GPR(R27)(r4) ld r28, VCPU_GPR(R28)(r4) ld r29, VCPU_GPR(R29)(r4) ld r30, VCPU_GPR(R30)(r4) ld r31, VCPU_GPR(R31)(r4) /* Switch DSCR to guest value */ ld r5, VCPU_DSCR(r4) mtspr SPRN_DSCR, r5 BEGIN_FTR_SECTION /* Skip next section on POWER7 */ b 8f END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S) /* Load up POWER8-specific registers */ ld r5, VCPU_IAMR(r4) lwz r6, VCPU_PSPB(r4) ld r7, VCPU_FSCR(r4) mtspr SPRN_IAMR, r5 mtspr SPRN_PSPB, r6 mtspr SPRN_FSCR, r7 ld r5, VCPU_DAWR(r4) ld r6, VCPU_DAWRX(r4) ld r7, VCPU_CIABR(r4) ld r8, VCPU_TAR(r4) /* * Handle broken DAWR case by not writing it. This means we * can still store the DAWR register for migration. */ BEGIN_FTR_SECTION mtspr SPRN_DAWR, r5 mtspr SPRN_DAWRX, r6 END_FTR_SECTION_IFSET(CPU_FTR_DAWR) mtspr SPRN_CIABR, r7 mtspr SPRN_TAR, r8 ld r5, VCPU_IC(r4) ld r8, VCPU_EBBHR(r4) mtspr SPRN_IC, r5 mtspr SPRN_EBBHR, r8 ld r5, VCPU_EBBRR(r4) ld r6, VCPU_BESCR(r4) lwz r7, VCPU_GUEST_PID(r4) ld r8, VCPU_WORT(r4) mtspr SPRN_EBBRR, r5 mtspr SPRN_BESCR, r6 mtspr SPRN_PID, r7 mtspr SPRN_WORT, r8 BEGIN_FTR_SECTION PPC_INVALIDATE_ERAT END_FTR_SECTION_IFSET(CPU_FTR_POWER9_DD1) BEGIN_FTR_SECTION /* POWER8-only registers */ ld r5, VCPU_TCSCR(r4) ld r6, VCPU_ACOP(r4) ld r7, VCPU_CSIGR(r4) ld r8, VCPU_TACR(r4) mtspr SPRN_TCSCR, r5 mtspr SPRN_ACOP, r6 mtspr SPRN_CSIGR, r7 mtspr SPRN_TACR, r8 nop FTR_SECTION_ELSE /* POWER9-only registers */ ld r5, VCPU_TID(r4) ld r6, VCPU_PSSCR(r4) lbz r8, HSTATE_FAKE_SUSPEND(r13) oris r6, r6, PSSCR_EC@h /* This makes stop trap to HV */ rldimi r6, r8, PSSCR_FAKE_SUSPEND_LG, 63 - PSSCR_FAKE_SUSPEND_LG ld r7, VCPU_HFSCR(r4) mtspr SPRN_TIDR, r5 mtspr SPRN_PSSCR, r6 mtspr SPRN_HFSCR, r7 ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_300) 8: ld r5, VCPU_SPRG0(r4) ld r6, VCPU_SPRG1(r4) ld r7, VCPU_SPRG2(r4) ld r8, VCPU_SPRG3(r4) mtspr SPRN_SPRG0, r5 mtspr SPRN_SPRG1, r6 mtspr SPRN_SPRG2, r7 mtspr SPRN_SPRG3, r8 /* Load up DAR and DSISR */ ld r5, VCPU_DAR(r4) lwz r6, VCPU_DSISR(r4) mtspr SPRN_DAR, r5 mtspr SPRN_DSISR, r6 /* Restore AMR and UAMOR, set AMOR to all 1s */ ld r5,VCPU_AMR(r4) ld r6,VCPU_UAMOR(r4) li r7,-1 mtspr SPRN_AMR,r5 mtspr SPRN_UAMOR,r6 mtspr SPRN_AMOR,r7 /* Restore state of CTRL run bit; assume 1 on entry */ lwz r5,VCPU_CTRL(r4) andi. r5,r5,1 bne 4f mfspr r6,SPRN_CTRLF clrrdi r6,r6,1 mtspr SPRN_CTRLT,r6 4: /* Secondary threads wait for primary to have done partition switch */ ld r5, HSTATE_KVM_VCORE(r13) lbz r6, HSTATE_PTID(r13) cmpwi r6, 0 beq 21f lbz r0, VCORE_IN_GUEST(r5) cmpwi r0, 0 bne 21f HMT_LOW 20: lwz r3, VCORE_ENTRY_EXIT(r5) cmpwi r3, 0x100 bge no_switch_exit lbz r0, VCORE_IN_GUEST(r5) cmpwi r0, 0 beq 20b HMT_MEDIUM 21: /* Set LPCR. */ ld r8,VCORE_LPCR(r5) mtspr SPRN_LPCR,r8 isync /* * Set the decrementer to the guest decrementer. */ ld r8,VCPU_DEC_EXPIRES(r4) /* r8 is a host timebase value here, convert to guest TB */ ld r5,HSTATE_KVM_VCORE(r13) ld r6,VCORE_TB_OFFSET_APPL(r5) add r8,r8,r6 mftb r7 subf r3,r7,r8 mtspr SPRN_DEC,r3 /* Check if HDEC expires soon */ mfspr r3, SPRN_HDEC EXTEND_HDEC(r3) cmpdi r3, 512 /* 1 microsecond */ blt hdec_soon /* For hash guest, clear out and reload the SLB */ ld r6, VCPU_KVM(r4) lbz r0, KVM_RADIX(r6) cmpwi r0, 0 bne 9f li r6, 0 slbmte r6, r6 slbia ptesync /* Load up guest SLB entries (N.B. slb_max will be 0 for radix) */ lwz r5,VCPU_SLB_MAX(r4) cmpwi r5,0 beq 9f mtctr r5 addi r6,r4,VCPU_SLB 1: ld r8,VCPU_SLB_E(r6) ld r9,VCPU_SLB_V(r6) slbmte r9,r8 addi r6,r6,VCPU_SLB_SIZE bdnz 1b 9: #ifdef CONFIG_KVM_XICS /* We are entering the guest on that thread, push VCPU to XIVE */ ld r10, HSTATE_XIVE_TIMA_PHYS(r13) cmpldi cr0, r10, 0 beq no_xive ld r11, VCPU_XIVE_SAVED_STATE(r4) li r9, TM_QW1_OS eieio stdcix r11,r9,r10 lwz r11, VCPU_XIVE_CAM_WORD(r4) li r9, TM_QW1_OS + TM_WORD2 stwcix r11,r9,r10 li r9, 1 stb r9, VCPU_XIVE_PUSHED(r4) eieio /* * We clear the irq_pending flag. There is a small chance of a * race vs. the escalation interrupt happening on another * processor setting it again, but the only consequence is to * cause a spurrious wakeup on the next H_CEDE which is not an * issue. */ li r0,0 stb r0, VCPU_IRQ_PENDING(r4) /* * In single escalation mode, if the escalation interrupt is * on, we mask it. */ lbz r0, VCPU_XIVE_ESC_ON(r4) cmpwi r0,0 beq 1f ld r10, VCPU_XIVE_ESC_RADDR(r4) li r9, XIVE_ESB_SET_PQ_01 ldcix r0, r10, r9 sync /* We have a possible subtle race here: The escalation interrupt might * have fired and be on its way to the host queue while we mask it, * and if we unmask it early enough (re-cede right away), there is * a theorical possibility that it fires again, thus landing in the * target queue more than once which is a big no-no. * * Fortunately, solving this is rather easy. If the above load setting * PQ to 01 returns a previous value where P is set, then we know the * escalation interrupt is somewhere on its way to the host. In that * case we simply don't clear the xive_esc_on flag below. It will be * eventually cleared by the handler for the escalation interrupt. * * Then, when doing a cede, we check that flag again before re-enabling * the escalation interrupt, and if set, we abort the cede. */ andi. r0, r0, XIVE_ESB_VAL_P bne- 1f /* Now P is 0, we can clear the flag */ li r0, 0 stb r0, VCPU_XIVE_ESC_ON(r4) 1: no_xive: #endif /* CONFIG_KVM_XICS */ deliver_guest_interrupt: ld r6, VCPU_CTR(r4) ld r7, VCPU_XER(r4) mtctr r6 mtxer r7 kvmppc_cede_reentry: /* r4 = vcpu, r13 = paca */ ld r10, VCPU_PC(r4) ld r11, VCPU_MSR(r4) ld r6, VCPU_SRR0(r4) ld r7, VCPU_SRR1(r4) mtspr SPRN_SRR0, r6 mtspr SPRN_SRR1, r7 /* r11 = vcpu->arch.msr & ~MSR_HV */ rldicl r11, r11, 63 - MSR_HV_LG, 1 rotldi r11, r11, 1 + MSR_HV_LG ori r11, r11, MSR_ME /* Check if we can deliver an external or decrementer interrupt now */ ld r0, VCPU_PENDING_EXC(r4) rldicl r0, r0, 64 - BOOK3S_IRQPRIO_EXTERNAL_LEVEL, 63 cmpdi cr1, r0, 0 andi. r8, r11, MSR_EE mfspr r8, SPRN_LPCR /* Insert EXTERNAL_LEVEL bit into LPCR at the MER bit position */ rldimi r8, r0, LPCR_MER_SH, 63 - LPCR_MER_SH mtspr SPRN_LPCR, r8 isync beq 5f li r0, BOOK3S_INTERRUPT_EXTERNAL bne cr1, 12f mfspr r0, SPRN_DEC BEGIN_FTR_SECTION /* On POWER9 check whether the guest has large decrementer enabled */ andis. r8, r8, LPCR_LD@h bne 15f END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) extsw r0, r0 15: cmpdi r0, 0 li r0, BOOK3S_INTERRUPT_DECREMENTER bge 5f 12: mtspr SPRN_SRR0, r10 mr r10,r0 mtspr SPRN_SRR1, r11 mr r9, r4 bl kvmppc_msr_interrupt 5: BEGIN_FTR_SECTION b fast_guest_return END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300) /* On POWER9, check for pending doorbell requests */ lbz r0, VCPU_DBELL_REQ(r4) cmpwi r0, 0 beq fast_guest_return ld r5, HSTATE_KVM_VCORE(r13) /* Set DPDES register so the CPU will take a doorbell interrupt */ li r0, 1 mtspr SPRN_DPDES, r0 std r0, VCORE_DPDES(r5) /* Make sure other cpus see vcore->dpdes set before dbell req clear */ lwsync /* Clear the pending doorbell request */ li r0, 0 stb r0, VCPU_DBELL_REQ(r4) /* * Required state: * R4 = vcpu * R10: value for HSRR0 * R11: value for HSRR1 * R13 = PACA */ fast_guest_return: li r0,0 stb r0,VCPU_CEDED(r4) /* cancel cede */ mtspr SPRN_HSRR0,r10 mtspr SPRN_HSRR1,r11 /* Activate guest mode, so faults get handled by KVM */ li r9, KVM_GUEST_MODE_GUEST_HV stb r9, HSTATE_IN_GUEST(r13) #ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING /* Accumulate timing */ addi r3, r4, VCPU_TB_GUEST bl kvmhv_accumulate_time #endif /* Enter guest */ BEGIN_FTR_SECTION ld r5, VCPU_CFAR(r4) mtspr SPRN_CFAR, r5 END_FTR_SECTION_IFSET(CPU_FTR_CFAR) BEGIN_FTR_SECTION ld r0, VCPU_PPR(r4) END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) ld r5, VCPU_LR(r4) lwz r6, VCPU_CR(r4) mtlr r5 mtcr r6 ld r1, VCPU_GPR(R1)(r4) ld r2, VCPU_GPR(R2)(r4) ld r3, VCPU_GPR(R3)(r4) ld r5, VCPU_GPR(R5)(r4) ld r6, VCPU_GPR(R6)(r4) ld r7, VCPU_GPR(R7)(r4) ld r8, VCPU_GPR(R8)(r4) ld r9, VCPU_GPR(R9)(r4) ld r10, VCPU_GPR(R10)(r4) ld r11, VCPU_GPR(R11)(r4) ld r12, VCPU_GPR(R12)(r4) ld r13, VCPU_GPR(R13)(r4) BEGIN_FTR_SECTION mtspr SPRN_PPR, r0 END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) /* Move canary into DSISR to check for later */ BEGIN_FTR_SECTION li r0, 0x7fff mtspr SPRN_HDSISR, r0 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) ld r0, VCPU_GPR(R0)(r4) ld r4, VCPU_GPR(R4)(r4) HRFI_TO_GUEST b . secondary_too_late: li r12, 0 stw r12, STACK_SLOT_TRAP(r1) cmpdi r4, 0 beq 11f stw r12, VCPU_TRAP(r4) #ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING addi r3, r4, VCPU_TB_RMEXIT bl kvmhv_accumulate_time #endif 11: b kvmhv_switch_to_host no_switch_exit: HMT_MEDIUM li r12, 0 b 12f hdec_soon: li r12, BOOK3S_INTERRUPT_HV_DECREMENTER 12: stw r12, VCPU_TRAP(r4) mr r9, r4 #ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING addi r3, r4, VCPU_TB_RMEXIT bl kvmhv_accumulate_time #endif b guest_bypass /****************************************************************************** * * * Exit code * * * *****************************************************************************/ /* * We come here from the first-level interrupt handlers. */ .globl kvmppc_interrupt_hv kvmppc_interrupt_hv: /* * Register contents: * R12 = (guest CR << 32) | interrupt vector * R13 = PACA * guest R12 saved in shadow VCPU SCRATCH0 * guest CTR saved in shadow VCPU SCRATCH1 if RELOCATABLE * guest R13 saved in SPRN_SCRATCH0 */ std r9, HSTATE_SCRATCH2(r13) lbz r9, HSTATE_IN_GUEST(r13) cmpwi r9, KVM_GUEST_MODE_HOST_HV beq kvmppc_bad_host_intr #ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE cmpwi r9, KVM_GUEST_MODE_GUEST ld r9, HSTATE_SCRATCH2(r13) beq kvmppc_interrupt_pr #endif /* We're now back in the host but in guest MMU context */ li r9, KVM_GUEST_MODE_HOST_HV stb r9, HSTATE_IN_GUEST(r13) ld r9, HSTATE_KVM_VCPU(r13) /* Save registers */ std r0, VCPU_GPR(R0)(r9) std r1, VCPU_GPR(R1)(r9) std r2, VCPU_GPR(R2)(r9) std r3, VCPU_GPR(R3)(r9) std r4, VCPU_GPR(R4)(r9) std r5, VCPU_GPR(R5)(r9) std r6, VCPU_GPR(R6)(r9) std r7, VCPU_GPR(R7)(r9) std r8, VCPU_GPR(R8)(r9) ld r0, HSTATE_SCRATCH2(r13) std r0, VCPU_GPR(R9)(r9) std r10, VCPU_GPR(R10)(r9) std r11, VCPU_GPR(R11)(r9) ld r3, HSTATE_SCRATCH0(r13) std r3, VCPU_GPR(R12)(r9) /* CR is in the high half of r12 */ srdi r4, r12, 32 stw r4, VCPU_CR(r9) BEGIN_FTR_SECTION ld r3, HSTATE_CFAR(r13) std r3, VCPU_CFAR(r9) END_FTR_SECTION_IFSET(CPU_FTR_CFAR) BEGIN_FTR_SECTION ld r4, HSTATE_PPR(r13) std r4, VCPU_PPR(r9) END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) /* Restore R1/R2 so we can handle faults */ ld r1, HSTATE_HOST_R1(r13) ld r2, PACATOC(r13) mfspr r10, SPRN_SRR0 mfspr r11, SPRN_SRR1 std r10, VCPU_SRR0(r9) std r11, VCPU_SRR1(r9) /* trap is in the low half of r12, clear CR from the high half */ clrldi r12, r12, 32 andi. r0, r12, 2 /* need to read HSRR0/1? */ beq 1f mfspr r10, SPRN_HSRR0 mfspr r11, SPRN_HSRR1 clrrdi r12, r12, 2 1: std r10, VCPU_PC(r9) std r11, VCPU_MSR(r9) GET_SCRATCH0(r3) mflr r4 std r3, VCPU_GPR(R13)(r9) std r4, VCPU_LR(r9) stw r12,VCPU_TRAP(r9) /* * Now that we have saved away SRR0/1 and HSRR0/1, * interrupts are recoverable in principle, so set MSR_RI. * This becomes important for relocation-on interrupts from * the guest, which we can get in radix mode on POWER9. */ li r0, MSR_RI mtmsrd r0, 1 #ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING addi r3, r9, VCPU_TB_RMINTR mr r4, r9 bl kvmhv_accumulate_time ld r5, VCPU_GPR(R5)(r9) ld r6, VCPU_GPR(R6)(r9) ld r7, VCPU_GPR(R7)(r9) ld r8, VCPU_GPR(R8)(r9) #endif /* Save HEIR (HV emulation assist reg) in emul_inst if this is an HEI (HV emulation interrupt, e40) */ li r3,KVM_INST_FETCH_FAILED stw r3,VCPU_LAST_INST(r9) cmpwi r12,BOOK3S_INTERRUPT_H_EMUL_ASSIST bne 11f mfspr r3,SPRN_HEIR 11: stw r3,VCPU_HEIR(r9) /* these are volatile across C function calls */ #ifdef CONFIG_RELOCATABLE ld r3, HSTATE_SCRATCH1(r13) mtctr r3 #else mfctr r3 #endif mfxer r4 std r3, VCPU_CTR(r9) std r4, VCPU_XER(r9) #ifdef CONFIG_PPC_TRANSACTIONAL_MEM /* For softpatch interrupt, go off and do TM instruction emulation */ cmpwi r12, BOOK3S_INTERRUPT_HV_SOFTPATCH beq kvmppc_tm_emul #endif /* If this is a page table miss then see if it's theirs or ours */ cmpwi r12, BOOK3S_INTERRUPT_H_DATA_STORAGE beq kvmppc_hdsi cmpwi r12, BOOK3S_INTERRUPT_H_INST_STORAGE beq kvmppc_hisi /* See if this is a leftover HDEC interrupt */ cmpwi r12,BOOK3S_INTERRUPT_HV_DECREMENTER bne 2f mfspr r3,SPRN_HDEC EXTEND_HDEC(r3) cmpdi r3,0 mr r4,r9 bge fast_guest_return 2: /* See if this is an hcall we can handle in real mode */ cmpwi r12,BOOK3S_INTERRUPT_SYSCALL beq hcall_try_real_mode /* Hypervisor doorbell - exit only if host IPI flag set */ cmpwi r12, BOOK3S_INTERRUPT_H_DOORBELL bne 3f BEGIN_FTR_SECTION PPC_MSGSYNC lwsync END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) lbz r0, HSTATE_HOST_IPI(r13) cmpwi r0, 0 beq 4f b guest_exit_cont 3: /* If it's a hypervisor facility unavailable interrupt, save HFSCR */ cmpwi r12, BOOK3S_INTERRUPT_H_FAC_UNAVAIL bne 14f mfspr r3, SPRN_HFSCR std r3, VCPU_HFSCR(r9) b guest_exit_cont 14: /* External interrupt ? */ cmpwi r12, BOOK3S_INTERRUPT_EXTERNAL bne+ guest_exit_cont /* External interrupt, first check for host_ipi. If this is * set, we know the host wants us out so let's do it now */ bl kvmppc_read_intr /* * Restore the active volatile registers after returning from * a C function. */ ld r9, HSTATE_KVM_VCPU(r13) li r12, BOOK3S_INTERRUPT_EXTERNAL /* * kvmppc_read_intr return codes: * * Exit to host (r3 > 0) * 1 An interrupt is pending that needs to be handled by the host * Exit guest and return to host by branching to guest_exit_cont * * 2 Passthrough that needs completion in the host * Exit guest and return to host by branching to guest_exit_cont * However, we also set r12 to BOOK3S_INTERRUPT_HV_RM_HARD * to indicate to the host to complete handling the interrupt * * Before returning to guest, we check if any CPU is heading out * to the host and if so, we head out also. If no CPUs are heading * check return values <= 0. * * Return to guest (r3 <= 0) * 0 No external interrupt is pending * -1 A guest wakeup IPI (which has now been cleared) * In either case, we return to guest to deliver any pending * guest interrupts. * * -2 A PCI passthrough external interrupt was handled * (interrupt was delivered directly to guest) * Return to guest to deliver any pending guest interrupts. */ cmpdi r3, 1 ble 1f /* Return code = 2 */ li r12, BOOK3S_INTERRUPT_HV_RM_HARD stw r12, VCPU_TRAP(r9) b guest_exit_cont 1: /* Return code <= 1 */ cmpdi r3, 0 bgt guest_exit_cont /* Return code <= 0 */ 4: ld r5, HSTATE_KVM_VCORE(r13) lwz r0, VCORE_ENTRY_EXIT(r5) cmpwi r0, 0x100 mr r4, r9 blt deliver_guest_interrupt guest_exit_cont: /* r9 = vcpu, r12 = trap, r13 = paca */ /* Save more register state */ mfdar r6 mfdsisr r7 std r6, VCPU_DAR(r9) stw r7, VCPU_DSISR(r9) /* don't overwrite fault_dar/fault_dsisr if HDSI */ cmpwi r12,BOOK3S_INTERRUPT_H_DATA_STORAGE beq mc_cont std r6, VCPU_FAULT_DAR(r9) stw r7, VCPU_FAULT_DSISR(r9) /* See if it is a machine check */ cmpwi r12, BOOK3S_INTERRUPT_MACHINE_CHECK beq machine_check_realmode mc_cont: #ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING addi r3, r9, VCPU_TB_RMEXIT mr r4, r9 bl kvmhv_accumulate_time #endif #ifdef CONFIG_KVM_XICS /* We are exiting, pull the VP from the XIVE */ lbz r0, VCPU_XIVE_PUSHED(r9) cmpwi cr0, r0, 0 beq 1f li r7, TM_SPC_PULL_OS_CTX li r6, TM_QW1_OS mfmsr r0 andi. r0, r0, MSR_DR /* in real mode? */ beq 2f ld r10, HSTATE_XIVE_TIMA_VIRT(r13) cmpldi cr0, r10, 0 beq 1f /* First load to pull the context, we ignore the value */ eieio lwzx r11, r7, r10 /* Second load to recover the context state (Words 0 and 1) */ ldx r11, r6, r10 b 3f 2: ld r10, HSTATE_XIVE_TIMA_PHYS(r13) cmpldi cr0, r10, 0 beq 1f /* First load to pull the context, we ignore the value */ eieio lwzcix r11, r7, r10 /* Second load to recover the context state (Words 0 and 1) */ ldcix r11, r6, r10 3: std r11, VCPU_XIVE_SAVED_STATE(r9) /* Fixup some of the state for the next load */ li r10, 0 li r0, 0xff stb r10, VCPU_XIVE_PUSHED(r9) stb r10, (VCPU_XIVE_SAVED_STATE+3)(r9) stb r0, (VCPU_XIVE_SAVED_STATE+4)(r9) eieio 1: #endif /* CONFIG_KVM_XICS */ /* For hash guest, read the guest SLB and save it away */ ld r5, VCPU_KVM(r9) lbz r0, KVM_RADIX(r5) li r5, 0 cmpwi r0, 0 bne 3f /* for radix, save 0 entries */ lwz r0,VCPU_SLB_NR(r9) /* number of entries in SLB */ mtctr r0 li r6,0 addi r7,r9,VCPU_SLB 1: slbmfee r8,r6 andis. r0,r8,SLB_ESID_V@h beq 2f add r8,r8,r6 /* put index in */ slbmfev r3,r6 std r8,VCPU_SLB_E(r7) std r3,VCPU_SLB_V(r7) addi r7,r7,VCPU_SLB_SIZE addi r5,r5,1 2: addi r6,r6,1 bdnz 1b /* Finally clear out the SLB */ li r0,0 slbmte r0,r0 slbia ptesync 3: stw r5,VCPU_SLB_MAX(r9) /* load host SLB entries */ BEGIN_MMU_FTR_SECTION b 0f END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX) ld r8,PACA_SLBSHADOWPTR(r13) .rept SLB_NUM_BOLTED li r3, SLBSHADOW_SAVEAREA LDX_BE r5, r8, r3 addi r3, r3, 8 LDX_BE r6, r8, r3 andis. r7,r5,SLB_ESID_V@h beq 1f slbmte r6,r5 1: addi r8,r8,16 .endr 0: guest_bypass: stw r12, STACK_SLOT_TRAP(r1) /* Save DEC */ /* Do this before kvmhv_commence_exit so we know TB is guest TB */ ld r3, HSTATE_KVM_VCORE(r13) mfspr r5,SPRN_DEC mftb r6 /* On P9, if the guest has large decr enabled, don't sign extend */ BEGIN_FTR_SECTION ld r4, VCORE_LPCR(r3) andis. r4, r4, LPCR_LD@h bne 16f END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) extsw r5,r5 16: add r5,r5,r6 /* r5 is a guest timebase value here, convert to host TB */ ld r4,VCORE_TB_OFFSET_APPL(r3) subf r5,r4,r5 std r5,VCPU_DEC_EXPIRES(r9) /* Increment exit count, poke other threads to exit */ mr r3, r12 bl kvmhv_commence_exit nop ld r9, HSTATE_KVM_VCPU(r13) /* Stop others sending VCPU interrupts to this physical CPU */ li r0, -1 stw r0, VCPU_CPU(r9) stw r0, VCPU_THREAD_CPU(r9) /* Save guest CTRL register, set runlatch to 1 */ mfspr r6,SPRN_CTRLF stw r6,VCPU_CTRL(r9) andi. r0,r6,1 bne 4f ori r6,r6,1 mtspr SPRN_CTRLT,r6 4: /* * Save the guest PURR/SPURR */ mfspr r5,SPRN_PURR mfspr r6,SPRN_SPURR ld r7,VCPU_PURR(r9) ld r8,VCPU_SPURR(r9) std r5,VCPU_PURR(r9) std r6,VCPU_SPURR(r9) subf r5,r7,r5 subf r6,r8,r6 /* * Restore host PURR/SPURR and add guest times * so that the time in the guest gets accounted. */ ld r3,HSTATE_PURR(r13) ld r4,HSTATE_SPURR(r13) add r3,r3,r5 add r4,r4,r6 mtspr SPRN_PURR,r3 mtspr SPRN_SPURR,r4 BEGIN_FTR_SECTION b 8f END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S) /* Save POWER8-specific registers */ mfspr r5, SPRN_IAMR mfspr r6, SPRN_PSPB mfspr r7, SPRN_FSCR std r5, VCPU_IAMR(r9) stw r6, VCPU_PSPB(r9) std r7, VCPU_FSCR(r9) mfspr r5, SPRN_IC mfspr r7, SPRN_TAR std r5, VCPU_IC(r9) std r7, VCPU_TAR(r9) mfspr r8, SPRN_EBBHR std r8, VCPU_EBBHR(r9) mfspr r5, SPRN_EBBRR mfspr r6, SPRN_BESCR mfspr r7, SPRN_PID mfspr r8, SPRN_WORT std r5, VCPU_EBBRR(r9) std r6, VCPU_BESCR(r9) stw r7, VCPU_GUEST_PID(r9) std r8, VCPU_WORT(r9) BEGIN_FTR_SECTION mfspr r5, SPRN_TCSCR mfspr r6, SPRN_ACOP mfspr r7, SPRN_CSIGR mfspr r8, SPRN_TACR std r5, VCPU_TCSCR(r9) std r6, VCPU_ACOP(r9) std r7, VCPU_CSIGR(r9) std r8, VCPU_TACR(r9) FTR_SECTION_ELSE mfspr r5, SPRN_TIDR mfspr r6, SPRN_PSSCR std r5, VCPU_TID(r9) rldicl r6, r6, 4, 50 /* r6 &= PSSCR_GUEST_VIS */ rotldi r6, r6, 60 std r6, VCPU_PSSCR(r9) /* Restore host HFSCR value */ ld r7, STACK_SLOT_HFSCR(r1) mtspr SPRN_HFSCR, r7 ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_300) /* * Restore various registers to 0, where non-zero values * set by the guest could disrupt the host. */ li r0, 0 mtspr SPRN_PSPB, r0 mtspr SPRN_WORT, r0 BEGIN_FTR_SECTION mtspr SPRN_IAMR, r0 mtspr SPRN_TCSCR, r0 /* Set MMCRS to 1<<31 to freeze and disable the SPMC counters */ li r0, 1 sldi r0, r0, 31 mtspr SPRN_MMCRS, r0 END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300) 8: /* Save and reset AMR and UAMOR before turning on the MMU */ mfspr r5,SPRN_AMR mfspr r6,SPRN_UAMOR std r5,VCPU_AMR(r9) std r6,VCPU_UAMOR(r9) li r6,0 mtspr SPRN_AMR,r6 mtspr SPRN_UAMOR, r6 /* Switch DSCR back to host value */ mfspr r8, SPRN_DSCR ld r7, HSTATE_DSCR(r13) std r8, VCPU_DSCR(r9) mtspr SPRN_DSCR, r7 /* Save non-volatile GPRs */ std r14, VCPU_GPR(R14)(r9) std r15, VCPU_GPR(R15)(r9) std r16, VCPU_GPR(R16)(r9) std r17, VCPU_GPR(R17)(r9) std r18, VCPU_GPR(R18)(r9) std r19, VCPU_GPR(R19)(r9) std r20, VCPU_GPR(R20)(r9) std r21, VCPU_GPR(R21)(r9) std r22, VCPU_GPR(R22)(r9) std r23, VCPU_GPR(R23)(r9) std r24, VCPU_GPR(R24)(r9) std r25, VCPU_GPR(R25)(r9) std r26, VCPU_GPR(R26)(r9) std r27, VCPU_GPR(R27)(r9) std r28, VCPU_GPR(R28)(r9) std r29, VCPU_GPR(R29)(r9) std r30, VCPU_GPR(R30)(r9) std r31, VCPU_GPR(R31)(r9) /* Save SPRGs */ mfspr r3, SPRN_SPRG0 mfspr r4, SPRN_SPRG1 mfspr r5, SPRN_SPRG2 mfspr r6, SPRN_SPRG3 std r3, VCPU_SPRG0(r9) std r4, VCPU_SPRG1(r9) std r5, VCPU_SPRG2(r9) std r6, VCPU_SPRG3(r9) /* save FP state */ mr r3, r9 bl kvmppc_save_fp #ifdef CONFIG_PPC_TRANSACTIONAL_MEM /* * Branch around the call if both CPU_FTR_TM and * CPU_FTR_P9_TM_HV_ASSIST are off. */ BEGIN_FTR_SECTION b 91f END_FTR_SECTION(CPU_FTR_TM | CPU_FTR_P9_TM_HV_ASSIST, 0) /* * NOTE THAT THIS TRASHES ALL NON-VOLATILE REGISTERS INCLUDING CR */ bl kvmppc_save_tm 91: #endif /* Increment yield count if they have a VPA */ ld r8, VCPU_VPA(r9) /* do they have a VPA? */ cmpdi r8, 0 beq 25f li r4, LPPACA_YIELDCOUNT LWZX_BE r3, r8, r4 addi r3, r3, 1 STWX_BE r3, r8, r4 li r3, 1 stb r3, VCPU_VPA_DIRTY(r9) 25: /* Save PMU registers if requested */ /* r8 and cr0.eq are live here */ BEGIN_FTR_SECTION /* * POWER8 seems to have a hardware bug where setting * MMCR0[PMAE] along with MMCR0[PMC1CE] and/or MMCR0[PMCjCE] * when some counters are already negative doesn't seem * to cause a performance monitor alert (and hence interrupt). * The effect of this is that when saving the PMU state, * if there is no PMU alert pending when we read MMCR0 * before freezing the counters, but one becomes pending * before we read the counters, we lose it. * To work around this, we need a way to freeze the counters * before reading MMCR0. Normally, freezing the counters * is done by writing MMCR0 (to set MMCR0[FC]) which * unavoidably writes MMCR0[PMA0] as well. On POWER8, * we can also freeze the counters using MMCR2, by writing * 1s to all the counter freeze condition bits (there are * 9 bits each for 6 counters). */ li r3, -1 /* set all freeze bits */ clrrdi r3, r3, 10 mfspr r10, SPRN_MMCR2 mtspr SPRN_MMCR2, r3 isync END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) li r3, 1 sldi r3, r3, 31 /* MMCR0_FC (freeze counters) bit */ mfspr r4, SPRN_MMCR0 /* save MMCR0 */ mtspr SPRN_MMCR0, r3 /* freeze all counters, disable ints */ mfspr r6, SPRN_MMCRA /* Clear MMCRA in order to disable SDAR updates */ li r7, 0 mtspr SPRN_MMCRA, r7 isync beq 21f /* if no VPA, save PMU stuff anyway */ lbz r7, LPPACA_PMCINUSE(r8) cmpwi r7, 0 /* did they ask for PMU stuff to be saved? */ bne 21f std r3, VCPU_MMCR(r9) /* if not, set saved MMCR0 to FC */ b 22f 21: mfspr r5, SPRN_MMCR1 mfspr r7, SPRN_SIAR mfspr r8, SPRN_SDAR std r4, VCPU_MMCR(r9) std r5, VCPU_MMCR + 8(r9) std r6, VCPU_MMCR + 16(r9) BEGIN_FTR_SECTION std r10, VCPU_MMCR + 24(r9) END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) std r7, VCPU_SIAR(r9) std r8, VCPU_SDAR(r9) mfspr r3, SPRN_PMC1 mfspr r4, SPRN_PMC2 mfspr r5, SPRN_PMC3 mfspr r6, SPRN_PMC4 mfspr r7, SPRN_PMC5 mfspr r8, SPRN_PMC6 stw r3, VCPU_PMC(r9) stw r4, VCPU_PMC + 4(r9) stw r5, VCPU_PMC + 8(r9) stw r6, VCPU_PMC + 12(r9) stw r7, VCPU_PMC + 16(r9) stw r8, VCPU_PMC + 20(r9) BEGIN_FTR_SECTION mfspr r5, SPRN_SIER std r5, VCPU_SIER(r9) BEGIN_FTR_SECTION_NESTED(96) mfspr r6, SPRN_SPMC1 mfspr r7, SPRN_SPMC2 mfspr r8, SPRN_MMCRS stw r6, VCPU_PMC + 24(r9) stw r7, VCPU_PMC + 28(r9) std r8, VCPU_MMCR + 32(r9) lis r4, 0x8000 mtspr SPRN_MMCRS, r4 END_FTR_SECTION_NESTED(CPU_FTR_ARCH_300, 0, 96) END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) 22: /* Restore host values of some registers */ BEGIN_FTR_SECTION ld r5, STACK_SLOT_CIABR(r1) ld r6, STACK_SLOT_DAWR(r1) ld r7, STACK_SLOT_DAWRX(r1) mtspr SPRN_CIABR, r5 /* * If the DAWR doesn't work, it's ok to write these here as * this value should always be zero */ mtspr SPRN_DAWR, r6 mtspr SPRN_DAWRX, r7 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) BEGIN_FTR_SECTION ld r5, STACK_SLOT_TID(r1) ld r6, STACK_SLOT_PSSCR(r1) ld r7, STACK_SLOT_PID(r1) ld r8, STACK_SLOT_IAMR(r1) mtspr SPRN_TIDR, r5 mtspr SPRN_PSSCR, r6 mtspr SPRN_PID, r7 mtspr SPRN_IAMR, r8 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) #ifdef CONFIG_PPC_RADIX_MMU /* * Are we running hash or radix ? */ ld r5, VCPU_KVM(r9) lbz r0, KVM_RADIX(r5) cmpwi cr2, r0, 0 beq cr2, 4f /* * Radix: do eieio; tlbsync; ptesync sequence in case we * interrupted the guest between a tlbie and a ptesync. */ eieio tlbsync ptesync /* Radix: Handle the case where the guest used an illegal PID */ LOAD_REG_ADDR(r4, mmu_base_pid) lwz r3, VCPU_GUEST_PID(r9) lwz r5, 0(r4) cmpw cr0,r3,r5 blt 2f /* * Illegal PID, the HW might have prefetched and cached in the TLB * some translations for the LPID 0 / guest PID combination which * Linux doesn't know about, so we need to flush that PID out of * the TLB. First we need to set LPIDR to 0 so tlbiel applies to * the right context. */ li r0,0 mtspr SPRN_LPID,r0 isync /* Then do a congruence class local flush */ ld r6,VCPU_KVM(r9) lwz r0,KVM_TLB_SETS(r6) mtctr r0 li r7,0x400 /* IS field = 0b01 */ ptesync sldi r0,r3,32 /* RS has PID */ 1: PPC_TLBIEL(7,0,2,1,1) /* RIC=2, PRS=1, R=1 */ addi r7,r7,0x1000 bdnz 1b ptesync 2: /* Flush the ERAT on radix P9 DD1 guest exit */ BEGIN_FTR_SECTION PPC_INVALIDATE_ERAT END_FTR_SECTION_IFSET(CPU_FTR_POWER9_DD1) 4: #endif /* CONFIG_PPC_RADIX_MMU */ /* * POWER7/POWER8 guest -> host partition switch code. * We don't have to lock against tlbies but we do * have to coordinate the hardware threads. * Here STACK_SLOT_TRAP(r1) contains the trap number. */ kvmhv_switch_to_host: /* Secondary threads wait for primary to do partition switch */ ld r5,HSTATE_KVM_VCORE(r13) ld r4,VCORE_KVM(r5) /* pointer to struct kvm */ lbz r3,HSTATE_PTID(r13) cmpwi r3,0 beq 15f HMT_LOW 13: lbz r3,VCORE_IN_GUEST(r5) cmpwi r3,0 bne 13b HMT_MEDIUM b 16f /* Primary thread waits for all the secondaries to exit guest */ 15: lwz r3,VCORE_ENTRY_EXIT(r5) rlwinm r0,r3,32-8,0xff clrldi r3,r3,56 cmpw r3,r0 bne 15b isync /* Did we actually switch to the guest at all? */ lbz r6, VCORE_IN_GUEST(r5) cmpwi r6, 0 beq 19f /* Primary thread switches back to host partition */ lwz r7,KVM_HOST_LPID(r4) BEGIN_FTR_SECTION ld r6,KVM_HOST_SDR1(r4) li r8,LPID_RSVD /* switch to reserved LPID */ mtspr SPRN_LPID,r8 ptesync mtspr SPRN_SDR1,r6 /* switch to host page table */ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300) mtspr SPRN_LPID,r7 isync BEGIN_FTR_SECTION /* DPDES and VTB are shared between threads */ mfspr r7, SPRN_DPDES mfspr r8, SPRN_VTB std r7, VCORE_DPDES(r5) std r8, VCORE_VTB(r5) /* clear DPDES so we don't get guest doorbells in the host */ li r8, 0 mtspr SPRN_DPDES, r8 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) /* If HMI, call kvmppc_realmode_hmi_handler() */ lwz r12, STACK_SLOT_TRAP(r1) cmpwi r12, BOOK3S_INTERRUPT_HMI bne 27f bl kvmppc_realmode_hmi_handler nop cmpdi r3, 0 /* * At this point kvmppc_realmode_hmi_handler may have resync-ed * the TB, and if it has, we must not subtract the guest timebase * offset from the timebase. So, skip it. * * Also, do not call kvmppc_subcore_exit_guest() because it has * been invoked as part of kvmppc_realmode_hmi_handler(). */ beq 30f 27: /* Subtract timebase offset from timebase */ ld r8, VCORE_TB_OFFSET_APPL(r5) cmpdi r8,0 beq 17f li r0, 0 std r0, VCORE_TB_OFFSET_APPL(r5) mftb r6 /* current guest timebase */ subf r8,r8,r6 mtspr SPRN_TBU40,r8 /* update upper 40 bits */ mftb r7 /* check if lower 24 bits overflowed */ clrldi r6,r6,40 clrldi r7,r7,40 cmpld r7,r6 bge 17f addis r8,r8,0x100 /* if so, increment upper 40 bits */ mtspr SPRN_TBU40,r8 17: bl kvmppc_subcore_exit_guest nop 30: ld r5,HSTATE_KVM_VCORE(r13) ld r4,VCORE_KVM(r5) /* pointer to struct kvm */ /* Reset PCR */ ld r0, VCORE_PCR(r5) cmpdi r0, 0 beq 18f li r0, 0 mtspr SPRN_PCR, r0 18: /* Signal secondary CPUs to continue */ stb r0,VCORE_IN_GUEST(r5) 19: lis r8,0x7fff /* MAX_INT@h */ mtspr SPRN_HDEC,r8 16: BEGIN_FTR_SECTION /* On POWER9 with HPT-on-radix we need to wait for all other threads */ ld r3, HSTATE_SPLIT_MODE(r13) cmpdi r3, 0 beq 47f lwz r8, KVM_SPLIT_DO_RESTORE(r3) cmpwi r8, 0 beq 47f bl kvmhv_p9_restore_lpcr nop b 48f 47: END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) ld r8,KVM_HOST_LPCR(r4) mtspr SPRN_LPCR,r8 isync 48: #ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING /* Finish timing, if we have a vcpu */ ld r4, HSTATE_KVM_VCPU(r13) cmpdi r4, 0 li r3, 0 beq 2f bl kvmhv_accumulate_time 2: #endif /* Unset guest mode */ li r0, KVM_GUEST_MODE_NONE stb r0, HSTATE_IN_GUEST(r13) lwz r12, STACK_SLOT_TRAP(r1) /* return trap # in r12 */ ld r0, SFS+PPC_LR_STKOFF(r1) addi r1, r1, SFS mtlr r0 blr #ifdef CONFIG_PPC_TRANSACTIONAL_MEM /* * Softpatch interrupt for transactional memory emulation cases * on POWER9 DD2.2. This is early in the guest exit path - we * haven't saved registers or done a treclaim yet. */ kvmppc_tm_emul: /* Save instruction image in HEIR */ mfspr r3, SPRN_HEIR stw r3, VCPU_HEIR(r9) /* * The cases we want to handle here are those where the guest * is in real suspend mode and is trying to transition to * transactional mode. */ lbz r0, HSTATE_FAKE_SUSPEND(r13) cmpwi r0, 0 /* keep exiting guest if in fake suspend */ bne guest_exit_cont rldicl r3, r11, 64 - MSR_TS_S_LG, 62 cmpwi r3, 1 /* or if not in suspend state */ bne guest_exit_cont /* Call C code to do the emulation */ mr r3, r9 bl kvmhv_p9_tm_emulation_early nop ld r9, HSTATE_KVM_VCPU(r13) li r12, BOOK3S_INTERRUPT_HV_SOFTPATCH cmpwi r3, 0 beq guest_exit_cont /* continue exiting if not handled */ ld r10, VCPU_PC(r9) ld r11, VCPU_MSR(r9) b fast_interrupt_c_return /* go back to guest if handled */ #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ /* * Check whether an HDSI is an HPTE not found fault or something else. * If it is an HPTE not found fault that is due to the guest accessing * a page that they have mapped but which we have paged out, then * we continue on with the guest exit path. In all other cases, * reflect the HDSI to the guest as a DSI. */ kvmppc_hdsi: ld r3, VCPU_KVM(r9) lbz r0, KVM_RADIX(r3) mfspr r4, SPRN_HDAR mfspr r6, SPRN_HDSISR BEGIN_FTR_SECTION /* Look for DSISR canary. If we find it, retry instruction */ cmpdi r6, 0x7fff beq 6f END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) cmpwi r0, 0 bne .Lradix_hdsi /* on radix, just save DAR/DSISR/ASDR */ /* HPTE not found fault or protection fault? */ andis. r0, r6, (DSISR_NOHPTE | DSISR_PROTFAULT)@h beq 1f /* if not, send it to the guest */ andi. r0, r11, MSR_DR /* data relocation enabled? */ beq 3f BEGIN_FTR_SECTION mfspr r5, SPRN_ASDR /* on POWER9, use ASDR to get VSID */ b 4f END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) clrrdi r0, r4, 28 PPC_SLBFEE_DOT(R5, R0) /* if so, look up SLB */ li r0, BOOK3S_INTERRUPT_DATA_SEGMENT bne 7f /* if no SLB entry found */ 4: std r4, VCPU_FAULT_DAR(r9) stw r6, VCPU_FAULT_DSISR(r9) /* Search the hash table. */ mr r3, r9 /* vcpu pointer */ li r7, 1 /* data fault */ bl kvmppc_hpte_hv_fault ld r9, HSTATE_KVM_VCPU(r13) ld r10, VCPU_PC(r9) ld r11, VCPU_MSR(r9) li r12, BOOK3S_INTERRUPT_H_DATA_STORAGE cmpdi r3, 0 /* retry the instruction */ beq 6f cmpdi r3, -1 /* handle in kernel mode */ beq guest_exit_cont cmpdi r3, -2 /* MMIO emulation; need instr word */ beq 2f /* Synthesize a DSI (or DSegI) for the guest */ ld r4, VCPU_FAULT_DAR(r9) mr r6, r3 1: li r0, BOOK3S_INTERRUPT_DATA_STORAGE mtspr SPRN_DSISR, r6 7: mtspr SPRN_DAR, r4 mtspr SPRN_SRR0, r10 mtspr SPRN_SRR1, r11 mr r10, r0 bl kvmppc_msr_interrupt fast_interrupt_c_return: 6: ld r7, VCPU_CTR(r9) ld r8, VCPU_XER(r9) mtctr r7 mtxer r8 mr r4, r9 b fast_guest_return 3: ld r5, VCPU_KVM(r9) /* not relocated, use VRMA */ ld r5, KVM_VRMA_SLB_V(r5) b 4b /* If this is for emulated MMIO, load the instruction word */ 2: li r8, KVM_INST_FETCH_FAILED /* In case lwz faults */ /* Set guest mode to 'jump over instruction' so if lwz faults * we'll just continue at the next IP. */ li r0, KVM_GUEST_MODE_SKIP stb r0, HSTATE_IN_GUEST(r13) /* Do the access with MSR:DR enabled */ mfmsr r3 ori r4, r3, MSR_DR /* Enable paging for data */ mtmsrd r4 lwz r8, 0(r10) mtmsrd r3 /* Store the result */ stw r8, VCPU_LAST_INST(r9) /* Unset guest mode. */ li r0, KVM_GUEST_MODE_HOST_HV stb r0, HSTATE_IN_GUEST(r13) b guest_exit_cont .Lradix_hdsi: std r4, VCPU_FAULT_DAR(r9) stw r6, VCPU_FAULT_DSISR(r9) .Lradix_hisi: mfspr r5, SPRN_ASDR std r5, VCPU_FAULT_GPA(r9) b guest_exit_cont /* * Similarly for an HISI, reflect it to the guest as an ISI unless * it is an HPTE not found fault for a page that we have paged out. */ kvmppc_hisi: ld r3, VCPU_KVM(r9) lbz r0, KVM_RADIX(r3) cmpwi r0, 0 bne .Lradix_hisi /* for radix, just save ASDR */ andis. r0, r11, SRR1_ISI_NOPT@h beq 1f andi. r0, r11, MSR_IR /* instruction relocation enabled? */ beq 3f BEGIN_FTR_SECTION mfspr r5, SPRN_ASDR /* on POWER9, use ASDR to get VSID */ b 4f END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) clrrdi r0, r10, 28 PPC_SLBFEE_DOT(R5, R0) /* if so, look up SLB */ li r0, BOOK3S_INTERRUPT_INST_SEGMENT bne 7f /* if no SLB entry found */ 4: /* Search the hash table. */ mr r3, r9 /* vcpu pointer */ mr r4, r10 mr r6, r11 li r7, 0 /* instruction fault */ bl kvmppc_hpte_hv_fault ld r9, HSTATE_KVM_VCPU(r13) ld r10, VCPU_PC(r9) ld r11, VCPU_MSR(r9) li r12, BOOK3S_INTERRUPT_H_INST_STORAGE cmpdi r3, 0 /* retry the instruction */ beq fast_interrupt_c_return cmpdi r3, -1 /* handle in kernel mode */ beq guest_exit_cont /* Synthesize an ISI (or ISegI) for the guest */ mr r11, r3 1: li r0, BOOK3S_INTERRUPT_INST_STORAGE 7: mtspr SPRN_SRR0, r10 mtspr SPRN_SRR1, r11 mr r10, r0 bl kvmppc_msr_interrupt b fast_interrupt_c_return 3: ld r6, VCPU_KVM(r9) /* not relocated, use VRMA */ ld r5, KVM_VRMA_SLB_V(r6) b 4b /* * Try to handle an hcall in real mode. * Returns to the guest if we handle it, or continues on up to * the kernel if we can't (i.e. if we don't have a handler for * it, or if the handler returns H_TOO_HARD). * * r5 - r8 contain hcall args, * r9 = vcpu, r10 = pc, r11 = msr, r12 = trap, r13 = paca */ hcall_try_real_mode: ld r3,VCPU_GPR(R3)(r9) andi. r0,r11,MSR_PR /* sc 1 from userspace - reflect to guest syscall */ bne sc_1_fast_return clrrdi r3,r3,2 cmpldi r3,hcall_real_table_end - hcall_real_table bge guest_exit_cont /* See if this hcall is enabled for in-kernel handling */ ld r4, VCPU_KVM(r9) srdi r0, r3, 8 /* r0 = (r3 / 4) >> 6 */ sldi r0, r0, 3 /* index into kvm->arch.enabled_hcalls[] */ add r4, r4, r0 ld r0, KVM_ENABLED_HCALLS(r4) rlwinm r4, r3, 32-2, 0x3f /* r4 = (r3 / 4) & 0x3f */ srd r0, r0, r4 andi. r0, r0, 1 beq guest_exit_cont /* Get pointer to handler, if any, and call it */ LOAD_REG_ADDR(r4, hcall_real_table) lwax r3,r3,r4 cmpwi r3,0 beq guest_exit_cont add r12,r3,r4 mtctr r12 mr r3,r9 /* get vcpu pointer */ ld r4,VCPU_GPR(R4)(r9) bctrl cmpdi r3,H_TOO_HARD beq hcall_real_fallback ld r4,HSTATE_KVM_VCPU(r13) std r3,VCPU_GPR(R3)(r4) ld r10,VCPU_PC(r4) ld r11,VCPU_MSR(r4) b fast_guest_return sc_1_fast_return: mtspr SPRN_SRR0,r10 mtspr SPRN_SRR1,r11 li r10, BOOK3S_INTERRUPT_SYSCALL bl kvmppc_msr_interrupt mr r4,r9 b fast_guest_return /* We've attempted a real mode hcall, but it's punted it back * to userspace. We need to restore some clobbered volatiles * before resuming the pass-it-to-qemu path */ hcall_real_fallback: li r12,BOOK3S_INTERRUPT_SYSCALL ld r9, HSTATE_KVM_VCPU(r13) b guest_exit_cont .globl hcall_real_table hcall_real_table: .long 0 /* 0 - unused */ .long DOTSYM(kvmppc_h_remove) - hcall_real_table .long DOTSYM(kvmppc_h_enter) - hcall_real_table .long DOTSYM(kvmppc_h_read) - hcall_real_table .long DOTSYM(kvmppc_h_clear_mod) - hcall_real_table .long DOTSYM(kvmppc_h_clear_ref) - hcall_real_table .long DOTSYM(kvmppc_h_protect) - hcall_real_table .long DOTSYM(kvmppc_h_get_tce) - hcall_real_table .long DOTSYM(kvmppc_rm_h_put_tce) - hcall_real_table .long 0 /* 0x24 - H_SET_SPRG0 */ .long DOTSYM(kvmppc_h_set_dabr) - hcall_real_table .long 0 /* 0x2c */ .long 0 /* 0x30 */ .long 0 /* 0x34 */ .long 0 /* 0x38 */ .long 0 /* 0x3c */ .long 0 /* 0x40 */ .long 0 /* 0x44 */ .long 0 /* 0x48 */ .long 0 /* 0x4c */ .long 0 /* 0x50 */ .long 0 /* 0x54 */ .long 0 /* 0x58 */ .long 0 /* 0x5c */ .long 0 /* 0x60 */ #ifdef CONFIG_KVM_XICS .long DOTSYM(kvmppc_rm_h_eoi) - hcall_real_table .long DOTSYM(kvmppc_rm_h_cppr) - hcall_real_table .long DOTSYM(kvmppc_rm_h_ipi) - hcall_real_table .long DOTSYM(kvmppc_rm_h_ipoll) - hcall_real_table .long DOTSYM(kvmppc_rm_h_xirr) - hcall_real_table #else .long 0 /* 0x64 - H_EOI */ .long 0 /* 0x68 - H_CPPR */ .long 0 /* 0x6c - H_IPI */ .long 0 /* 0x70 - H_IPOLL */ .long 0 /* 0x74 - H_XIRR */ #endif .long 0 /* 0x78 */ .long 0 /* 0x7c */ .long 0 /* 0x80 */ .long 0 /* 0x84 */ .long 0 /* 0x88 */ .long 0 /* 0x8c */ .long 0 /* 0x90 */ .long 0 /* 0x94 */ .long 0 /* 0x98 */ .long 0 /* 0x9c */ .long 0 /* 0xa0 */ .long 0 /* 0xa4 */ .long 0 /* 0xa8 */ .long 0 /* 0xac */ .long 0 /* 0xb0 */ .long 0 /* 0xb4 */ .long 0 /* 0xb8 */ .long 0 /* 0xbc */ .long 0 /* 0xc0 */ .long 0 /* 0xc4 */ .long 0 /* 0xc8 */ .long 0 /* 0xcc */ .long 0 /* 0xd0 */ .long 0 /* 0xd4 */ .long 0 /* 0xd8 */ .long 0 /* 0xdc */ .long DOTSYM(kvmppc_h_cede) - hcall_real_table .long DOTSYM(kvmppc_rm_h_confer) - hcall_real_table .long 0 /* 0xe8 */ .long 0 /* 0xec */ .long 0 /* 0xf0 */ .long 0 /* 0xf4 */ .long 0 /* 0xf8 */ .long 0 /* 0xfc */ .long 0 /* 0x100 */ .long 0 /* 0x104 */ .long 0 /* 0x108 */ .long 0 /* 0x10c */ .long 0 /* 0x110 */ .long 0 /* 0x114 */ .long 0 /* 0x118 */ .long 0 /* 0x11c */ .long 0 /* 0x120 */ .long DOTSYM(kvmppc_h_bulk_remove) - hcall_real_table .long 0 /* 0x128 */ .long 0 /* 0x12c */ .long 0 /* 0x130 */ .long DOTSYM(kvmppc_h_set_xdabr) - hcall_real_table .long DOTSYM(kvmppc_rm_h_stuff_tce) - hcall_real_table .long DOTSYM(kvmppc_rm_h_put_tce_indirect) - hcall_real_table .long 0 /* 0x140 */ .long 0 /* 0x144 */ .long 0 /* 0x148 */ .long 0 /* 0x14c */ .long 0 /* 0x150 */ .long 0 /* 0x154 */ .long 0 /* 0x158 */ .long 0 /* 0x15c */ .long 0 /* 0x160 */ .long 0 /* 0x164 */ .long 0 /* 0x168 */ .long 0 /* 0x16c */ .long 0 /* 0x170 */ .long 0 /* 0x174 */ .long 0 /* 0x178 */ .long 0 /* 0x17c */ .long 0 /* 0x180 */ .long 0 /* 0x184 */ .long 0 /* 0x188 */ .long 0 /* 0x18c */ .long 0 /* 0x190 */ .long 0 /* 0x194 */ .long 0 /* 0x198 */ .long 0 /* 0x19c */ .long 0 /* 0x1a0 */ .long 0 /* 0x1a4 */ .long 0 /* 0x1a8 */ .long 0 /* 0x1ac */ .long 0 /* 0x1b0 */ .long 0 /* 0x1b4 */ .long 0 /* 0x1b8 */ .long 0 /* 0x1bc */ .long 0 /* 0x1c0 */ .long 0 /* 0x1c4 */ .long 0 /* 0x1c8 */ .long 0 /* 0x1cc */ .long 0 /* 0x1d0 */ .long 0 /* 0x1d4 */ .long 0 /* 0x1d8 */ .long 0 /* 0x1dc */ .long 0 /* 0x1e0 */ .long 0 /* 0x1e4 */ .long 0 /* 0x1e8 */ .long 0 /* 0x1ec */ .long 0 /* 0x1f0 */ .long 0 /* 0x1f4 */ .long 0 /* 0x1f8 */ .long 0 /* 0x1fc */ .long 0 /* 0x200 */ .long 0 /* 0x204 */ .long 0 /* 0x208 */ .long 0 /* 0x20c */ .long 0 /* 0x210 */ .long 0 /* 0x214 */ .long 0 /* 0x218 */ .long 0 /* 0x21c */ .long 0 /* 0x220 */ .long 0 /* 0x224 */ .long 0 /* 0x228 */ .long 0 /* 0x22c */ .long 0 /* 0x230 */ .long 0 /* 0x234 */ .long 0 /* 0x238 */ .long 0 /* 0x23c */ .long 0 /* 0x240 */ .long 0 /* 0x244 */ .long 0 /* 0x248 */ .long 0 /* 0x24c */ .long 0 /* 0x250 */ .long 0 /* 0x254 */ .long 0 /* 0x258 */ .long 0 /* 0x25c */ .long 0 /* 0x260 */ .long 0 /* 0x264 */ .long 0 /* 0x268 */ .long 0 /* 0x26c */ .long 0 /* 0x270 */ .long 0 /* 0x274 */ .long 0 /* 0x278 */ .long 0 /* 0x27c */ .long 0 /* 0x280 */ .long 0 /* 0x284 */ .long 0 /* 0x288 */ .long 0 /* 0x28c */ .long 0 /* 0x290 */ .long 0 /* 0x294 */ .long 0 /* 0x298 */ .long 0 /* 0x29c */ .long 0 /* 0x2a0 */ .long 0 /* 0x2a4 */ .long 0 /* 0x2a8 */ .long 0 /* 0x2ac */ .long 0 /* 0x2b0 */ .long 0 /* 0x2b4 */ .long 0 /* 0x2b8 */ .long 0 /* 0x2bc */ .long 0 /* 0x2c0 */ .long 0 /* 0x2c4 */ .long 0 /* 0x2c8 */ .long 0 /* 0x2cc */ .long 0 /* 0x2d0 */ .long 0 /* 0x2d4 */ .long 0 /* 0x2d8 */ .long 0 /* 0x2dc */ .long 0 /* 0x2e0 */ .long 0 /* 0x2e4 */ .long 0 /* 0x2e8 */ .long 0 /* 0x2ec */ .long 0 /* 0x2f0 */ .long 0 /* 0x2f4 */ .long 0 /* 0x2f8 */ #ifdef CONFIG_KVM_XICS .long DOTSYM(kvmppc_rm_h_xirr_x) - hcall_real_table #else .long 0 /* 0x2fc - H_XIRR_X*/ #endif .long DOTSYM(kvmppc_h_random) - hcall_real_table .globl hcall_real_table_end hcall_real_table_end: _GLOBAL(kvmppc_h_set_xdabr) andi. r0, r5, DABRX_USER | DABRX_KERNEL beq 6f li r0, DABRX_USER | DABRX_KERNEL | DABRX_BTI andc. r0, r5, r0 beq 3f 6: li r3, H_PARAMETER blr _GLOBAL(kvmppc_h_set_dabr) li r5, DABRX_USER | DABRX_KERNEL 3: BEGIN_FTR_SECTION b 2f END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) std r4,VCPU_DABR(r3) stw r5, VCPU_DABRX(r3) mtspr SPRN_DABRX, r5 /* Work around P7 bug where DABR can get corrupted on mtspr */ 1: mtspr SPRN_DABR,r4 mfspr r5, SPRN_DABR cmpd r4, r5 bne 1b isync li r3,0 blr 2: BEGIN_FTR_SECTION /* POWER9 with disabled DAWR */ li r3, H_HARDWARE blr END_FTR_SECTION_IFCLR(CPU_FTR_DAWR) /* Emulate H_SET_DABR/X on P8 for the sake of compat mode guests */ rlwimi r5, r4, 5, DAWRX_DR | DAWRX_DW rlwimi r5, r4, 2, DAWRX_WT clrrdi r4, r4, 3 std r4, VCPU_DAWR(r3) std r5, VCPU_DAWRX(r3) mtspr SPRN_DAWR, r4 mtspr SPRN_DAWRX, r5 li r3, 0 blr _GLOBAL(kvmppc_h_cede) /* r3 = vcpu pointer, r11 = msr, r13 = paca */ ori r11,r11,MSR_EE std r11,VCPU_MSR(r3) li r0,1 stb r0,VCPU_CEDED(r3) sync /* order setting ceded vs. testing prodded */ lbz r5,VCPU_PRODDED(r3) cmpwi r5,0 bne kvm_cede_prodded li r12,0 /* set trap to 0 to say hcall is handled */ stw r12,VCPU_TRAP(r3) li r0,H_SUCCESS std r0,VCPU_GPR(R3)(r3) /* * Set our bit in the bitmask of napping threads unless all the * other threads are already napping, in which case we send this * up to the host. */ ld r5,HSTATE_KVM_VCORE(r13) lbz r6,HSTATE_PTID(r13) lwz r8,VCORE_ENTRY_EXIT(r5) clrldi r8,r8,56 li r0,1 sld r0,r0,r6 addi r6,r5,VCORE_NAPPING_THREADS 31: lwarx r4,0,r6 or r4,r4,r0 cmpw r4,r8 beq kvm_cede_exit stwcx. r4,0,r6 bne 31b /* order napping_threads update vs testing entry_exit_map */ isync li r0,NAPPING_CEDE stb r0,HSTATE_NAPPING(r13) lwz r7,VCORE_ENTRY_EXIT(r5) cmpwi r7,0x100 bge 33f /* another thread already exiting */ /* * Although not specifically required by the architecture, POWER7 * preserves the following registers in nap mode, even if an SMT mode * switch occurs: SLB entries, PURR, SPURR, AMOR, UAMOR, AMR, SPRG0-3, * DAR, DSISR, DABR, DABRX, DSCR, PMCx, MMCRx, SIAR, SDAR. */ /* Save non-volatile GPRs */ std r14, VCPU_GPR(R14)(r3) std r15, VCPU_GPR(R15)(r3) std r16, VCPU_GPR(R16)(r3) std r17, VCPU_GPR(R17)(r3) std r18, VCPU_GPR(R18)(r3) std r19, VCPU_GPR(R19)(r3) std r20, VCPU_GPR(R20)(r3) std r21, VCPU_GPR(R21)(r3) std r22, VCPU_GPR(R22)(r3) std r23, VCPU_GPR(R23)(r3) std r24, VCPU_GPR(R24)(r3) std r25, VCPU_GPR(R25)(r3) std r26, VCPU_GPR(R26)(r3) std r27, VCPU_GPR(R27)(r3) std r28, VCPU_GPR(R28)(r3) std r29, VCPU_GPR(R29)(r3) std r30, VCPU_GPR(R30)(r3) std r31, VCPU_GPR(R31)(r3) /* save FP state */ bl kvmppc_save_fp #ifdef CONFIG_PPC_TRANSACTIONAL_MEM /* * Branch around the call if both CPU_FTR_TM and * CPU_FTR_P9_TM_HV_ASSIST are off. */ BEGIN_FTR_SECTION b 91f END_FTR_SECTION(CPU_FTR_TM | CPU_FTR_P9_TM_HV_ASSIST, 0) /* * NOTE THAT THIS TRASHES ALL NON-VOLATILE REGISTERS INCLUDING CR */ ld r9, HSTATE_KVM_VCPU(r13) bl kvmppc_save_tm 91: #endif /* * Set DEC to the smaller of DEC and HDEC, so that we wake * no later than the end of our timeslice (HDEC interrupts * don't wake us from nap). */ mfspr r3, SPRN_DEC mfspr r4, SPRN_HDEC mftb r5 BEGIN_FTR_SECTION /* On P9 check whether the guest has large decrementer mode enabled */ ld r6, HSTATE_KVM_VCORE(r13) ld r6, VCORE_LPCR(r6) andis. r6, r6, LPCR_LD@h bne 68f END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) extsw r3, r3 68: EXTEND_HDEC(r4) cmpd r3, r4 ble 67f mtspr SPRN_DEC, r4 67: /* save expiry time of guest decrementer */ add r3, r3, r5 ld r4, HSTATE_KVM_VCPU(r13) ld r5, HSTATE_KVM_VCORE(r13) ld r6, VCORE_TB_OFFSET_APPL(r5) subf r3, r6, r3 /* convert to host TB value */ std r3, VCPU_DEC_EXPIRES(r4) #ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING ld r4, HSTATE_KVM_VCPU(r13) addi r3, r4, VCPU_TB_CEDE bl kvmhv_accumulate_time #endif lis r3, LPCR_PECEDP@h /* Do wake on privileged doorbell */ /* * Take a nap until a decrementer or external or doobell interrupt * occurs, with PECE1 and PECE0 set in LPCR. * On POWER8, set PECEDH, and if we are ceding, also set PECEDP. * Also clear the runlatch bit before napping. */ kvm_do_nap: mfspr r0, SPRN_CTRLF clrrdi r0, r0, 1 mtspr SPRN_CTRLT, r0 li r0,1 stb r0,HSTATE_HWTHREAD_REQ(r13) mfspr r5,SPRN_LPCR ori r5,r5,LPCR_PECE0 | LPCR_PECE1 BEGIN_FTR_SECTION ori r5, r5, LPCR_PECEDH rlwimi r5, r3, 0, LPCR_PECEDP END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) kvm_nap_sequence: /* desired LPCR value in r5 */ BEGIN_FTR_SECTION /* * PSSCR bits: exit criterion = 1 (wakeup based on LPCR at sreset) * enable state loss = 1 (allow SMT mode switch) * requested level = 0 (just stop dispatching) */ lis r3, (PSSCR_EC | PSSCR_ESL)@h mtspr SPRN_PSSCR, r3 /* Set LPCR_PECE_HVEE bit to enable wakeup by HV interrupts */ li r4, LPCR_PECE_HVEE@higher sldi r4, r4, 32 or r5, r5, r4 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) mtspr SPRN_LPCR,r5 isync li r0, 0 std r0, HSTATE_SCRATCH0(r13) ptesync ld r0, HSTATE_SCRATCH0(r13) 1: cmpd r0, r0 bne 1b BEGIN_FTR_SECTION nap FTR_SECTION_ELSE PPC_STOP ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_300) b . 33: mr r4, r3 li r3, 0 li r12, 0 b 34f kvm_end_cede: /* get vcpu pointer */ ld r4, HSTATE_KVM_VCPU(r13) /* Woken by external or decrementer interrupt */ ld r1, HSTATE_HOST_R1(r13) #ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING addi r3, r4, VCPU_TB_RMINTR bl kvmhv_accumulate_time #endif #ifdef CONFIG_PPC_TRANSACTIONAL_MEM /* * Branch around the call if both CPU_FTR_TM and * CPU_FTR_P9_TM_HV_ASSIST are off. */ BEGIN_FTR_SECTION b 91f END_FTR_SECTION(CPU_FTR_TM | CPU_FTR_P9_TM_HV_ASSIST, 0) /* * NOTE THAT THIS TRASHES ALL NON-VOLATILE REGISTERS INCLUDING CR */ bl kvmppc_restore_tm 91: #endif /* load up FP state */ bl kvmppc_load_fp /* Restore guest decrementer */ ld r3, VCPU_DEC_EXPIRES(r4) ld r5, HSTATE_KVM_VCORE(r13) ld r6, VCORE_TB_OFFSET_APPL(r5) add r3, r3, r6 /* convert host TB to guest TB value */ mftb r7 subf r3, r7, r3 mtspr SPRN_DEC, r3 /* Load NV GPRS */ ld r14, VCPU_GPR(R14)(r4) ld r15, VCPU_GPR(R15)(r4) ld r16, VCPU_GPR(R16)(r4) ld r17, VCPU_GPR(R17)(r4) ld r18, VCPU_GPR(R18)(r4) ld r19, VCPU_GPR(R19)(r4) ld r20, VCPU_GPR(R20)(r4) ld r21, VCPU_GPR(R21)(r4) ld r22, VCPU_GPR(R22)(r4) ld r23, VCPU_GPR(R23)(r4) ld r24, VCPU_GPR(R24)(r4) ld r25, VCPU_GPR(R25)(r4) ld r26, VCPU_GPR(R26)(r4) ld r27, VCPU_GPR(R27)(r4) ld r28, VCPU_GPR(R28)(r4) ld r29, VCPU_GPR(R29)(r4) ld r30, VCPU_GPR(R30)(r4) ld r31, VCPU_GPR(R31)(r4) /* Check the wake reason in SRR1 to see why we got here */ bl kvmppc_check_wake_reason /* * Restore volatile registers since we could have called a * C routine in kvmppc_check_wake_reason * r4 = VCPU * r3 tells us whether we need to return to host or not * WARNING: it gets checked further down: * should not modify r3 until this check is done. */ ld r4, HSTATE_KVM_VCPU(r13) /* clear our bit in vcore->napping_threads */ 34: ld r5,HSTATE_KVM_VCORE(r13) lbz r7,HSTATE_PTID(r13) li r0,1 sld r0,r0,r7 addi r6,r5,VCORE_NAPPING_THREADS 32: lwarx r7,0,r6 andc r7,r7,r0 stwcx. r7,0,r6 bne 32b li r0,0 stb r0,HSTATE_NAPPING(r13) /* See if the wake reason saved in r3 means we need to exit */ stw r12, VCPU_TRAP(r4) mr r9, r4 cmpdi r3, 0 bgt guest_exit_cont /* see if any other thread is already exiting */ lwz r0,VCORE_ENTRY_EXIT(r5) cmpwi r0,0x100 bge guest_exit_cont b kvmppc_cede_reentry /* if not go back to guest */ /* cede when already previously prodded case */ kvm_cede_prodded: li r0,0 stb r0,VCPU_PRODDED(r3) sync /* order testing prodded vs. clearing ceded */ stb r0,VCPU_CEDED(r3) li r3,H_SUCCESS blr /* we've ceded but we want to give control to the host */ kvm_cede_exit: ld r9, HSTATE_KVM_VCPU(r13) #ifdef CONFIG_KVM_XICS /* Abort if we still have a pending escalation */ lbz r5, VCPU_XIVE_ESC_ON(r9) cmpwi r5, 0 beq 1f li r0, 0 stb r0, VCPU_CEDED(r9) 1: /* Enable XIVE escalation */ li r5, XIVE_ESB_SET_PQ_00 mfmsr r0 andi. r0, r0, MSR_DR /* in real mode? */ beq 1f ld r10, VCPU_XIVE_ESC_VADDR(r9) cmpdi r10, 0 beq 3f ldx r0, r10, r5 b 2f 1: ld r10, VCPU_XIVE_ESC_RADDR(r9) cmpdi r10, 0 beq 3f ldcix r0, r10, r5 2: sync li r0, 1 stb r0, VCPU_XIVE_ESC_ON(r9) #endif /* CONFIG_KVM_XICS */ 3: b guest_exit_cont /* Try to handle a machine check in real mode */ machine_check_realmode: mr r3, r9 /* get vcpu pointer */ bl kvmppc_realmode_machine_check nop ld r9, HSTATE_KVM_VCPU(r13) li r12, BOOK3S_INTERRUPT_MACHINE_CHECK /* * For the guest that is FWNMI capable, deliver all the MCE errors * (handled/unhandled) by exiting the guest with KVM_EXIT_NMI exit * reason. This new approach injects machine check errors in guest * address space to guest with additional information in the form * of RTAS event, thus enabling guest kernel to suitably handle * such errors. * * For the guest that is not FWNMI capable (old QEMU) fallback * to old behaviour for backward compatibility: * Deliver unhandled/fatal (e.g. UE) MCE errors to guest either * through machine check interrupt (set HSRR0 to 0x200). * For handled errors (no-fatal), just go back to guest execution * with current HSRR0. * if we receive machine check with MSR(RI=0) then deliver it to * guest as machine check causing guest to crash. */ ld r11, VCPU_MSR(r9) rldicl. r0, r11, 64-MSR_HV_LG, 63 /* check if it happened in HV mode */ bne mc_cont /* if so, exit to host */ /* Check if guest is capable of handling NMI exit */ ld r10, VCPU_KVM(r9) lbz r10, KVM_FWNMI(r10) cmpdi r10, 1 /* FWNMI capable? */ beq mc_cont /* if so, exit with KVM_EXIT_NMI. */ /* if not, fall through for backward compatibility. */ andi. r10, r11, MSR_RI /* check for unrecoverable exception */ beq 1f /* Deliver a machine check to guest */ ld r10, VCPU_PC(r9) cmpdi r3, 0 /* Did we handle MCE ? */ bne 2f /* Continue guest execution. */ /* If not, deliver a machine check. SRR0/1 are already set */ 1: li r10, BOOK3S_INTERRUPT_MACHINE_CHECK bl kvmppc_msr_interrupt 2: b fast_interrupt_c_return /* * Check the reason we woke from nap, and take appropriate action. * Returns (in r3): * 0 if nothing needs to be done * 1 if something happened that needs to be handled by the host * -1 if there was a guest wakeup (IPI or msgsnd) * -2 if we handled a PCI passthrough interrupt (returned by * kvmppc_read_intr only) * * Also sets r12 to the interrupt vector for any interrupt that needs * to be handled now by the host (0x500 for external interrupt), or zero. * Modifies all volatile registers (since it may call a C function). * This routine calls kvmppc_read_intr, a C function, if an external * interrupt is pending. */ kvmppc_check_wake_reason: mfspr r6, SPRN_SRR1 BEGIN_FTR_SECTION rlwinm r6, r6, 45-31, 0xf /* extract wake reason field (P8) */ FTR_SECTION_ELSE rlwinm r6, r6, 45-31, 0xe /* P7 wake reason field is 3 bits */ ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_207S) cmpwi r6, 8 /* was it an external interrupt? */ beq 7f /* if so, see what it was */ li r3, 0 li r12, 0 cmpwi r6, 6 /* was it the decrementer? */ beq 0f BEGIN_FTR_SECTION cmpwi r6, 5 /* privileged doorbell? */ beq 0f cmpwi r6, 3 /* hypervisor doorbell? */ beq 3f END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) cmpwi r6, 0xa /* Hypervisor maintenance ? */ beq 4f li r3, 1 /* anything else, return 1 */ 0: blr /* hypervisor doorbell */ 3: li r12, BOOK3S_INTERRUPT_H_DOORBELL /* * Clear the doorbell as we will invoke the handler * explicitly in the guest exit path. */ lis r6, (PPC_DBELL_SERVER << (63-36))@h PPC_MSGCLR(6) /* see if it's a host IPI */ li r3, 1 BEGIN_FTR_SECTION PPC_MSGSYNC lwsync END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) lbz r0, HSTATE_HOST_IPI(r13) cmpwi r0, 0 bnelr /* if not, return -1 */ li r3, -1 blr /* Woken up due to Hypervisor maintenance interrupt */ 4: li r12, BOOK3S_INTERRUPT_HMI li r3, 1 blr /* external interrupt - create a stack frame so we can call C */ 7: mflr r0 std r0, PPC_LR_STKOFF(r1) stdu r1, -PPC_MIN_STKFRM(r1) bl kvmppc_read_intr nop li r12, BOOK3S_INTERRUPT_EXTERNAL cmpdi r3, 1 ble 1f /* * Return code of 2 means PCI passthrough interrupt, but * we need to return back to host to complete handling the * interrupt. Trap reason is expected in r12 by guest * exit code. */ li r12, BOOK3S_INTERRUPT_HV_RM_HARD 1: ld r0, PPC_MIN_STKFRM+PPC_LR_STKOFF(r1) addi r1, r1, PPC_MIN_STKFRM mtlr r0 blr /* * Save away FP, VMX and VSX registers. * r3 = vcpu pointer * N.B. r30 and r31 are volatile across this function, * thus it is not callable from C. */ kvmppc_save_fp: mflr r30 mr r31,r3 mfmsr r5 ori r8,r5,MSR_FP #ifdef CONFIG_ALTIVEC BEGIN_FTR_SECTION oris r8,r8,MSR_VEC@h END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif #ifdef CONFIG_VSX BEGIN_FTR_SECTION oris r8,r8,MSR_VSX@h END_FTR_SECTION_IFSET(CPU_FTR_VSX) #endif mtmsrd r8 addi r3,r3,VCPU_FPRS bl store_fp_state #ifdef CONFIG_ALTIVEC BEGIN_FTR_SECTION addi r3,r31,VCPU_VRS bl store_vr_state END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif mfspr r6,SPRN_VRSAVE stw r6,VCPU_VRSAVE(r31) mtlr r30 blr /* * Load up FP, VMX and VSX registers * r4 = vcpu pointer * N.B. r30 and r31 are volatile across this function, * thus it is not callable from C. */ kvmppc_load_fp: mflr r30 mr r31,r4 mfmsr r9 ori r8,r9,MSR_FP #ifdef CONFIG_ALTIVEC BEGIN_FTR_SECTION oris r8,r8,MSR_VEC@h END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif #ifdef CONFIG_VSX BEGIN_FTR_SECTION oris r8,r8,MSR_VSX@h END_FTR_SECTION_IFSET(CPU_FTR_VSX) #endif mtmsrd r8 addi r3,r4,VCPU_FPRS bl load_fp_state #ifdef CONFIG_ALTIVEC BEGIN_FTR_SECTION addi r3,r31,VCPU_VRS bl load_vr_state END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif lwz r7,VCPU_VRSAVE(r31) mtspr SPRN_VRSAVE,r7 mtlr r30 mr r4,r31 blr #ifdef CONFIG_PPC_TRANSACTIONAL_MEM /* * Save transactional state and TM-related registers. * Called with r9 pointing to the vcpu struct. * This can modify all checkpointed registers, but * restores r1, r2 and r9 (vcpu pointer) before exit. */ kvmppc_save_tm: mflr r0 std r0, PPC_LR_STKOFF(r1) stdu r1, -PPC_MIN_STKFRM(r1) /* Turn on TM. */ mfmsr r8 li r0, 1 rldimi r8, r0, MSR_TM_LG, 63-MSR_TM_LG mtmsrd r8 ld r5, VCPU_MSR(r9) rldicl. r5, r5, 64 - MSR_TS_S_LG, 62 beq 1f /* TM not active in guest. */ std r1, HSTATE_HOST_R1(r13) li r3, TM_CAUSE_KVM_RESCHED BEGIN_FTR_SECTION lbz r0, HSTATE_FAKE_SUSPEND(r13) /* Were we fake suspended? */ cmpwi r0, 0 beq 3f rldicl. r8, r8, 64 - MSR_TS_S_LG, 62 /* Did we actually hrfid? */ beq 4f BEGIN_FTR_SECTION_NESTED(96) bl pnv_power9_force_smt4_catch END_FTR_SECTION_NESTED(CPU_FTR_P9_TM_XER_SO_BUG, CPU_FTR_P9_TM_XER_SO_BUG, 96) nop b 6f 3: /* Emulation of the treclaim instruction needs TEXASR before treclaim */ mfspr r6, SPRN_TEXASR std r6, VCPU_ORIG_TEXASR(r9) 6: END_FTR_SECTION_IFSET(CPU_FTR_P9_TM_HV_ASSIST) /* Clear the MSR RI since r1, r13 are all going to be foobar. */ li r5, 0 mtmsrd r5, 1 /* All GPRs are volatile at this point. */ TRECLAIM(R3) /* Temporarily store r13 and r9 so we have some regs to play with */ SET_SCRATCH0(r13) GET_PACA(r13) std r9, PACATMSCRATCH(r13) /* If doing TM emulation on POWER9 DD2.2, check for fake suspend mode */ BEGIN_FTR_SECTION lbz r9, HSTATE_FAKE_SUSPEND(r13) cmpwi r9, 0 beq 2f /* * We were in fake suspend, so we are not going to save the * register state as the guest checkpointed state (since * we already have it), therefore we can now use any volatile GPR. */ /* Reload stack pointer and TOC. */ ld r1, HSTATE_HOST_R1(r13) ld r2, PACATOC(r13) /* Set MSR RI now we have r1 and r13 back. */ li r5, MSR_RI mtmsrd r5, 1 HMT_MEDIUM ld r6, HSTATE_DSCR(r13) mtspr SPRN_DSCR, r6 BEGIN_FTR_SECTION_NESTED(96) bl pnv_power9_force_smt4_release END_FTR_SECTION_NESTED(CPU_FTR_P9_TM_XER_SO_BUG, CPU_FTR_P9_TM_XER_SO_BUG, 96) nop 4: mfspr r3, SPRN_PSSCR /* PSSCR_FAKE_SUSPEND is a write-only bit, but clear it anyway */ li r0, PSSCR_FAKE_SUSPEND andc r3, r3, r0 mtspr SPRN_PSSCR, r3 ld r9, HSTATE_KVM_VCPU(r13) /* Don't save TEXASR, use value from last exit in real suspend state */ b 11f 2: END_FTR_SECTION_IFSET(CPU_FTR_P9_TM_HV_ASSIST) ld r9, HSTATE_KVM_VCPU(r13) /* Get a few more GPRs free. */ std r29, VCPU_GPRS_TM(29)(r9) std r30, VCPU_GPRS_TM(30)(r9) std r31, VCPU_GPRS_TM(31)(r9) /* Save away PPR and DSCR soon so don't run with user values. */ mfspr r31, SPRN_PPR HMT_MEDIUM mfspr r30, SPRN_DSCR ld r29, HSTATE_DSCR(r13) mtspr SPRN_DSCR, r29 /* Save all but r9, r13 & r29-r31 */ reg = 0 .rept 29 .if (reg != 9) && (reg != 13) std reg, VCPU_GPRS_TM(reg)(r9) .endif reg = reg + 1 .endr /* ... now save r13 */ GET_SCRATCH0(r4) std r4, VCPU_GPRS_TM(13)(r9) /* ... and save r9 */ ld r4, PACATMSCRATCH(r13) std r4, VCPU_GPRS_TM(9)(r9) /* Reload stack pointer and TOC. */ ld r1, HSTATE_HOST_R1(r13) ld r2, PACATOC(r13) /* Set MSR RI now we have r1 and r13 back. */ li r5, MSR_RI mtmsrd r5, 1 /* Save away checkpinted SPRs. */ std r31, VCPU_PPR_TM(r9) std r30, VCPU_DSCR_TM(r9) mflr r5 mfcr r6 mfctr r7 mfspr r8, SPRN_AMR mfspr r10, SPRN_TAR mfxer r11 std r5, VCPU_LR_TM(r9) stw r6, VCPU_CR_TM(r9) std r7, VCPU_CTR_TM(r9) std r8, VCPU_AMR_TM(r9) std r10, VCPU_TAR_TM(r9) std r11, VCPU_XER_TM(r9) /* Restore r12 as trap number. */ lwz r12, VCPU_TRAP(r9) /* Save FP/VSX. */ addi r3, r9, VCPU_FPRS_TM bl store_fp_state addi r3, r9, VCPU_VRS_TM bl store_vr_state mfspr r6, SPRN_VRSAVE stw r6, VCPU_VRSAVE_TM(r9) 1: /* * We need to save these SPRs after the treclaim so that the software * error code is recorded correctly in the TEXASR. Also the user may * change these outside of a transaction, so they must always be * context switched. */ mfspr r7, SPRN_TEXASR std r7, VCPU_TEXASR(r9) 11: mfspr r5, SPRN_TFHAR mfspr r6, SPRN_TFIAR std r5, VCPU_TFHAR(r9) std r6, VCPU_TFIAR(r9) addi r1, r1, PPC_MIN_STKFRM ld r0, PPC_LR_STKOFF(r1) mtlr r0 blr /* * Restore transactional state and TM-related registers. * Called with r4 pointing to the vcpu struct. * This potentially modifies all checkpointed registers. * It restores r1, r2, r4 from the PACA. */ kvmppc_restore_tm: mflr r0 std r0, PPC_LR_STKOFF(r1) /* Turn on TM/FP/VSX/VMX so we can restore them. */ mfmsr r5 li r6, MSR_TM >> 32 sldi r6, r6, 32 or r5, r5, r6 ori r5, r5, MSR_FP oris r5, r5, (MSR_VEC | MSR_VSX)@h mtmsrd r5 /* * The user may change these outside of a transaction, so they must * always be context switched. */ ld r5, VCPU_TFHAR(r4) ld r6, VCPU_TFIAR(r4) ld r7, VCPU_TEXASR(r4) mtspr SPRN_TFHAR, r5 mtspr SPRN_TFIAR, r6 mtspr SPRN_TEXASR, r7 li r0, 0 stb r0, HSTATE_FAKE_SUSPEND(r13) ld r5, VCPU_MSR(r4) rldicl. r5, r5, 64 - MSR_TS_S_LG, 62 beqlr /* TM not active in guest */ std r1, HSTATE_HOST_R1(r13) /* Make sure the failure summary is set, otherwise we'll program check * when we trechkpt. It's possible that this might have been not set * on a kvmppc_set_one_reg() call but we shouldn't let this crash the * host. */ oris r7, r7, (TEXASR_FS)@h mtspr SPRN_TEXASR, r7 /* * If we are doing TM emulation for the guest on a POWER9 DD2, * then we don't actually do a trechkpt -- we either set up * fake-suspend mode, or emulate a TM rollback. */ BEGIN_FTR_SECTION b .Ldo_tm_fake_load END_FTR_SECTION_IFSET(CPU_FTR_P9_TM_HV_ASSIST) /* * We need to load up the checkpointed state for the guest. * We need to do this early as it will blow away any GPRs, VSRs and * some SPRs. */ mr r31, r4 addi r3, r31, VCPU_FPRS_TM bl load_fp_state addi r3, r31, VCPU_VRS_TM bl load_vr_state mr r4, r31 lwz r7, VCPU_VRSAVE_TM(r4) mtspr SPRN_VRSAVE, r7 ld r5, VCPU_LR_TM(r4) lwz r6, VCPU_CR_TM(r4) ld r7, VCPU_CTR_TM(r4) ld r8, VCPU_AMR_TM(r4) ld r9, VCPU_TAR_TM(r4) ld r10, VCPU_XER_TM(r4) mtlr r5 mtcr r6 mtctr r7 mtspr SPRN_AMR, r8 mtspr SPRN_TAR, r9 mtxer r10 /* * Load up PPR and DSCR values but don't put them in the actual SPRs * till the last moment to avoid running with userspace PPR and DSCR for * too long. */ ld r29, VCPU_DSCR_TM(r4) ld r30, VCPU_PPR_TM(r4) std r2, PACATMSCRATCH(r13) /* Save TOC */ /* Clear the MSR RI since r1, r13 are all going to be foobar. */ li r5, 0 mtmsrd r5, 1 /* Load GPRs r0-r28 */ reg = 0 .rept 29 ld reg, VCPU_GPRS_TM(reg)(r31) reg = reg + 1 .endr mtspr SPRN_DSCR, r29 mtspr SPRN_PPR, r30 /* Load final GPRs */ ld 29, VCPU_GPRS_TM(29)(r31) ld 30, VCPU_GPRS_TM(30)(r31) ld 31, VCPU_GPRS_TM(31)(r31) /* TM checkpointed state is now setup. All GPRs are now volatile. */ TRECHKPT /* Now let's get back the state we need. */ HMT_MEDIUM GET_PACA(r13) ld r29, HSTATE_DSCR(r13) mtspr SPRN_DSCR, r29 ld r4, HSTATE_KVM_VCPU(r13) ld r1, HSTATE_HOST_R1(r13) ld r2, PACATMSCRATCH(r13) /* Set the MSR RI since we have our registers back. */ li r5, MSR_RI mtmsrd r5, 1 9: ld r0, PPC_LR_STKOFF(r1) mtlr r0 blr .Ldo_tm_fake_load: cmpwi r5, 1 /* check for suspended state */ bgt 10f stb r5, HSTATE_FAKE_SUSPEND(r13) b 9b /* and return */ 10: stdu r1, -PPC_MIN_STKFRM(r1) /* guest is in transactional state, so simulate rollback */ mr r3, r4 bl kvmhv_emulate_tm_rollback nop ld r4, HSTATE_KVM_VCPU(r13) /* our vcpu pointer has been trashed */ addi r1, r1, PPC_MIN_STKFRM b 9b #endif /* * We come here if we get any exception or interrupt while we are * executing host real mode code while in guest MMU context. * r12 is (CR << 32) | vector * r13 points to our PACA * r12 is saved in HSTATE_SCRATCH0(r13) * ctr is saved in HSTATE_SCRATCH1(r13) if RELOCATABLE * r9 is saved in HSTATE_SCRATCH2(r13) * r13 is saved in HSPRG1 * cfar is saved in HSTATE_CFAR(r13) * ppr is saved in HSTATE_PPR(r13) */ kvmppc_bad_host_intr: /* * Switch to the emergency stack, but start half-way down in * case we were already on it. */ mr r9, r1 std r1, PACAR1(r13) ld r1, PACAEMERGSP(r13) subi r1, r1, THREAD_SIZE/2 + INT_FRAME_SIZE std r9, 0(r1) std r0, GPR0(r1) std r9, GPR1(r1) std r2, GPR2(r1) SAVE_4GPRS(3, r1) SAVE_2GPRS(7, r1) srdi r0, r12, 32 clrldi r12, r12, 32 std r0, _CCR(r1) std r12, _TRAP(r1) andi. r0, r12, 2 beq 1f mfspr r3, SPRN_HSRR0 mfspr r4, SPRN_HSRR1 mfspr r5, SPRN_HDAR mfspr r6, SPRN_HDSISR b 2f 1: mfspr r3, SPRN_SRR0 mfspr r4, SPRN_SRR1 mfspr r5, SPRN_DAR mfspr r6, SPRN_DSISR 2: std r3, _NIP(r1) std r4, _MSR(r1) std r5, _DAR(r1) std r6, _DSISR(r1) ld r9, HSTATE_SCRATCH2(r13) ld r12, HSTATE_SCRATCH0(r13) GET_SCRATCH0(r0) SAVE_4GPRS(9, r1) std r0, GPR13(r1) SAVE_NVGPRS(r1) ld r5, HSTATE_CFAR(r13) std r5, ORIG_GPR3(r1) mflr r3 #ifdef CONFIG_RELOCATABLE ld r4, HSTATE_SCRATCH1(r13) #else mfctr r4 #endif mfxer r5 lbz r6, PACAIRQSOFTMASK(r13) std r3, _LINK(r1) std r4, _CTR(r1) std r5, _XER(r1) std r6, SOFTE(r1) ld r2, PACATOC(r13) LOAD_REG_IMMEDIATE(3, 0x7265677368657265) std r3, STACK_FRAME_OVERHEAD-16(r1) /* * On POWER9 do a minimal restore of the MMU and call C code, * which will print a message and panic. * XXX On POWER7 and POWER8, we just spin here since we don't * know what the other threads are doing (and we don't want to * coordinate with them) - but at least we now have register state * in memory that we might be able to look at from another CPU. */ BEGIN_FTR_SECTION b . END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300) ld r9, HSTATE_KVM_VCPU(r13) ld r10, VCPU_KVM(r9) li r0, 0 mtspr SPRN_AMR, r0 mtspr SPRN_IAMR, r0 mtspr SPRN_CIABR, r0 mtspr SPRN_DAWRX, r0 /* Flush the ERAT on radix P9 DD1 guest exit */ BEGIN_FTR_SECTION PPC_INVALIDATE_ERAT END_FTR_SECTION_IFSET(CPU_FTR_POWER9_DD1) BEGIN_MMU_FTR_SECTION b 4f END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX) slbmte r0, r0 slbia ptesync ld r8, PACA_SLBSHADOWPTR(r13) .rept SLB_NUM_BOLTED li r3, SLBSHADOW_SAVEAREA LDX_BE r5, r8, r3 addi r3, r3, 8 LDX_BE r6, r8, r3 andis. r7, r5, SLB_ESID_V@h beq 3f slbmte r6, r5 3: addi r8, r8, 16 .endr 4: lwz r7, KVM_HOST_LPID(r10) mtspr SPRN_LPID, r7 mtspr SPRN_PID, r0 ld r8, KVM_HOST_LPCR(r10) mtspr SPRN_LPCR, r8 isync li r0, KVM_GUEST_MODE_NONE stb r0, HSTATE_IN_GUEST(r13) /* * Turn on the MMU and jump to C code */ bcl 20, 31, .+4 5: mflr r3 addi r3, r3, 9f - 5b li r4, -1 rldimi r3, r4, 62, 0 /* ensure 0xc000000000000000 bits are set */ ld r4, PACAKMSR(r13) mtspr SPRN_SRR0, r3 mtspr SPRN_SRR1, r4 RFI_TO_KERNEL 9: addi r3, r1, STACK_FRAME_OVERHEAD bl kvmppc_bad_interrupt b 9b /* * This mimics the MSR transition on IRQ delivery. The new guest MSR is taken * from VCPU_INTR_MSR and is modified based on the required TM state changes. * r11 has the guest MSR value (in/out) * r9 has a vcpu pointer (in) * r0 is used as a scratch register */ kvmppc_msr_interrupt: rldicl r0, r11, 64 - MSR_TS_S_LG, 62 cmpwi r0, 2 /* Check if we are in transactional state.. */ ld r11, VCPU_INTR_MSR(r9) bne 1f /* ... if transactional, change to suspended */ li r0, 1 1: rldimi r11, r0, MSR_TS_S_LG, 63 - MSR_TS_T_LG blr /* * This works around a hardware bug on POWER8E processors, where * writing a 1 to the MMCR0[PMAO] bit doesn't generate a * performance monitor interrupt. Instead, when we need to have * an interrupt pending, we have to arrange for a counter to overflow. */ kvmppc_fix_pmao: li r3, 0 mtspr SPRN_MMCR2, r3 lis r3, (MMCR0_PMXE | MMCR0_FCECE)@h ori r3, r3, MMCR0_PMCjCE | MMCR0_C56RUN mtspr SPRN_MMCR0, r3 lis r3, 0x7fff ori r3, r3, 0xffff mtspr SPRN_PMC6, r3 isync blr #ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING /* * Start timing an activity * r3 = pointer to time accumulation struct, r4 = vcpu */ kvmhv_start_timing: ld r5, HSTATE_KVM_VCORE(r13) ld r6, VCORE_TB_OFFSET_APPL(r5) mftb r5 subf r5, r6, r5 /* subtract current timebase offset */ std r3, VCPU_CUR_ACTIVITY(r4) std r5, VCPU_ACTIVITY_START(r4) blr /* * Accumulate time to one activity and start another. * r3 = pointer to new time accumulation struct, r4 = vcpu */ kvmhv_accumulate_time: ld r5, HSTATE_KVM_VCORE(r13) ld r8, VCORE_TB_OFFSET_APPL(r5) ld r5, VCPU_CUR_ACTIVITY(r4) ld r6, VCPU_ACTIVITY_START(r4) std r3, VCPU_CUR_ACTIVITY(r4) mftb r7 subf r7, r8, r7 /* subtract current timebase offset */ std r7, VCPU_ACTIVITY_START(r4) cmpdi r5, 0 beqlr subf r3, r6, r7 ld r8, TAS_SEQCOUNT(r5) cmpdi r8, 0 addi r8, r8, 1 std r8, TAS_SEQCOUNT(r5) lwsync ld r7, TAS_TOTAL(r5) add r7, r7, r3 std r7, TAS_TOTAL(r5) ld r6, TAS_MIN(r5) ld r7, TAS_MAX(r5) beq 3f cmpd r3, r6 bge 1f 3: std r3, TAS_MIN(r5) 1: cmpd r3, r7 ble 2f std r3, TAS_MAX(r5) 2: lwsync addi r8, r8, 1 std r8, TAS_SEQCOUNT(r5) blr #endif