/* * Copyright © 2006-2007 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. * * Authors: * Eric Anholt */ #include #include #include #include #include "drmP.h" #include "intel_drv.h" #include "i915_drm.h" #include "i915_drv.h" #include "drm_dp_helper.h" #include "drm_crtc_helper.h" #define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) bool intel_pipe_has_type (struct drm_crtc *crtc, int type); static void intel_update_watermarks(struct drm_device *dev); static void intel_increase_pllclock(struct drm_crtc *crtc, bool schedule); typedef struct { /* given values */ int n; int m1, m2; int p1, p2; /* derived values */ int dot; int vco; int m; int p; } intel_clock_t; typedef struct { int min, max; } intel_range_t; typedef struct { int dot_limit; int p2_slow, p2_fast; } intel_p2_t; #define INTEL_P2_NUM 2 typedef struct intel_limit intel_limit_t; struct intel_limit { intel_range_t dot, vco, n, m, m1, m2, p, p1; intel_p2_t p2; bool (* find_pll)(const intel_limit_t *, struct drm_crtc *, int, int, intel_clock_t *); }; #define I8XX_DOT_MIN 25000 #define I8XX_DOT_MAX 350000 #define I8XX_VCO_MIN 930000 #define I8XX_VCO_MAX 1400000 #define I8XX_N_MIN 3 #define I8XX_N_MAX 16 #define I8XX_M_MIN 96 #define I8XX_M_MAX 140 #define I8XX_M1_MIN 18 #define I8XX_M1_MAX 26 #define I8XX_M2_MIN 6 #define I8XX_M2_MAX 16 #define I8XX_P_MIN 4 #define I8XX_P_MAX 128 #define I8XX_P1_MIN 2 #define I8XX_P1_MAX 33 #define I8XX_P1_LVDS_MIN 1 #define I8XX_P1_LVDS_MAX 6 #define I8XX_P2_SLOW 4 #define I8XX_P2_FAST 2 #define I8XX_P2_LVDS_SLOW 14 #define I8XX_P2_LVDS_FAST 7 #define I8XX_P2_SLOW_LIMIT 165000 #define I9XX_DOT_MIN 20000 #define I9XX_DOT_MAX 400000 #define I9XX_VCO_MIN 1400000 #define I9XX_VCO_MAX 2800000 #define PINEVIEW_VCO_MIN 1700000 #define PINEVIEW_VCO_MAX 3500000 #define I9XX_N_MIN 1 #define I9XX_N_MAX 6 /* Pineview's Ncounter is a ring counter */ #define PINEVIEW_N_MIN 3 #define PINEVIEW_N_MAX 6 #define I9XX_M_MIN 70 #define I9XX_M_MAX 120 #define PINEVIEW_M_MIN 2 #define PINEVIEW_M_MAX 256 #define I9XX_M1_MIN 10 #define I9XX_M1_MAX 22 #define I9XX_M2_MIN 5 #define I9XX_M2_MAX 9 /* Pineview M1 is reserved, and must be 0 */ #define PINEVIEW_M1_MIN 0 #define PINEVIEW_M1_MAX 0 #define PINEVIEW_M2_MIN 0 #define PINEVIEW_M2_MAX 254 #define I9XX_P_SDVO_DAC_MIN 5 #define I9XX_P_SDVO_DAC_MAX 80 #define I9XX_P_LVDS_MIN 7 #define I9XX_P_LVDS_MAX 98 #define PINEVIEW_P_LVDS_MIN 7 #define PINEVIEW_P_LVDS_MAX 112 #define I9XX_P1_MIN 1 #define I9XX_P1_MAX 8 #define I9XX_P2_SDVO_DAC_SLOW 10 #define I9XX_P2_SDVO_DAC_FAST 5 #define I9XX_P2_SDVO_DAC_SLOW_LIMIT 200000 #define I9XX_P2_LVDS_SLOW 14 #define I9XX_P2_LVDS_FAST 7 #define I9XX_P2_LVDS_SLOW_LIMIT 112000 /*The parameter is for SDVO on G4x platform*/ #define G4X_DOT_SDVO_MIN 25000 #define G4X_DOT_SDVO_MAX 270000 #define G4X_VCO_MIN 1750000 #define G4X_VCO_MAX 3500000 #define G4X_N_SDVO_MIN 1 #define G4X_N_SDVO_MAX 4 #define G4X_M_SDVO_MIN 104 #define G4X_M_SDVO_MAX 138 #define G4X_M1_SDVO_MIN 17 #define G4X_M1_SDVO_MAX 23 #define G4X_M2_SDVO_MIN 5 #define G4X_M2_SDVO_MAX 11 #define G4X_P_SDVO_MIN 10 #define G4X_P_SDVO_MAX 30 #define G4X_P1_SDVO_MIN 1 #define G4X_P1_SDVO_MAX 3 #define G4X_P2_SDVO_SLOW 10 #define G4X_P2_SDVO_FAST 10 #define G4X_P2_SDVO_LIMIT 270000 /*The parameter is for HDMI_DAC on G4x platform*/ #define G4X_DOT_HDMI_DAC_MIN 22000 #define G4X_DOT_HDMI_DAC_MAX 400000 #define G4X_N_HDMI_DAC_MIN 1 #define G4X_N_HDMI_DAC_MAX 4 #define G4X_M_HDMI_DAC_MIN 104 #define G4X_M_HDMI_DAC_MAX 138 #define G4X_M1_HDMI_DAC_MIN 16 #define G4X_M1_HDMI_DAC_MAX 23 #define G4X_M2_HDMI_DAC_MIN 5 #define G4X_M2_HDMI_DAC_MAX 11 #define G4X_P_HDMI_DAC_MIN 5 #define G4X_P_HDMI_DAC_MAX 80 #define G4X_P1_HDMI_DAC_MIN 1 #define G4X_P1_HDMI_DAC_MAX 8 #define G4X_P2_HDMI_DAC_SLOW 10 #define G4X_P2_HDMI_DAC_FAST 5 #define G4X_P2_HDMI_DAC_LIMIT 165000 /*The parameter is for SINGLE_CHANNEL_LVDS on G4x platform*/ #define G4X_DOT_SINGLE_CHANNEL_LVDS_MIN 20000 #define G4X_DOT_SINGLE_CHANNEL_LVDS_MAX 115000 #define G4X_N_SINGLE_CHANNEL_LVDS_MIN 1 #define G4X_N_SINGLE_CHANNEL_LVDS_MAX 3 #define G4X_M_SINGLE_CHANNEL_LVDS_MIN 104 #define G4X_M_SINGLE_CHANNEL_LVDS_MAX 138 #define G4X_M1_SINGLE_CHANNEL_LVDS_MIN 17 #define G4X_M1_SINGLE_CHANNEL_LVDS_MAX 23 #define G4X_M2_SINGLE_CHANNEL_LVDS_MIN 5 #define G4X_M2_SINGLE_CHANNEL_LVDS_MAX 11 #define G4X_P_SINGLE_CHANNEL_LVDS_MIN 28 #define G4X_P_SINGLE_CHANNEL_LVDS_MAX 112 #define G4X_P1_SINGLE_CHANNEL_LVDS_MIN 2 #define G4X_P1_SINGLE_CHANNEL_LVDS_MAX 8 #define G4X_P2_SINGLE_CHANNEL_LVDS_SLOW 14 #define G4X_P2_SINGLE_CHANNEL_LVDS_FAST 14 #define G4X_P2_SINGLE_CHANNEL_LVDS_LIMIT 0 /*The parameter is for DUAL_CHANNEL_LVDS on G4x platform*/ #define G4X_DOT_DUAL_CHANNEL_LVDS_MIN 80000 #define G4X_DOT_DUAL_CHANNEL_LVDS_MAX 224000 #define G4X_N_DUAL_CHANNEL_LVDS_MIN 1 #define G4X_N_DUAL_CHANNEL_LVDS_MAX 3 #define G4X_M_DUAL_CHANNEL_LVDS_MIN 104 #define G4X_M_DUAL_CHANNEL_LVDS_MAX 138 #define G4X_M1_DUAL_CHANNEL_LVDS_MIN 17 #define G4X_M1_DUAL_CHANNEL_LVDS_MAX 23 #define G4X_M2_DUAL_CHANNEL_LVDS_MIN 5 #define G4X_M2_DUAL_CHANNEL_LVDS_MAX 11 #define G4X_P_DUAL_CHANNEL_LVDS_MIN 14 #define G4X_P_DUAL_CHANNEL_LVDS_MAX 42 #define G4X_P1_DUAL_CHANNEL_LVDS_MIN 2 #define G4X_P1_DUAL_CHANNEL_LVDS_MAX 6 #define G4X_P2_DUAL_CHANNEL_LVDS_SLOW 7 #define G4X_P2_DUAL_CHANNEL_LVDS_FAST 7 #define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT 0 /*The parameter is for DISPLAY PORT on G4x platform*/ #define G4X_DOT_DISPLAY_PORT_MIN 161670 #define G4X_DOT_DISPLAY_PORT_MAX 227000 #define G4X_N_DISPLAY_PORT_MIN 1 #define G4X_N_DISPLAY_PORT_MAX 2 #define G4X_M_DISPLAY_PORT_MIN 97 #define G4X_M_DISPLAY_PORT_MAX 108 #define G4X_M1_DISPLAY_PORT_MIN 0x10 #define G4X_M1_DISPLAY_PORT_MAX 0x12 #define G4X_M2_DISPLAY_PORT_MIN 0x05 #define G4X_M2_DISPLAY_PORT_MAX 0x06 #define G4X_P_DISPLAY_PORT_MIN 10 #define G4X_P_DISPLAY_PORT_MAX 20 #define G4X_P1_DISPLAY_PORT_MIN 1 #define G4X_P1_DISPLAY_PORT_MAX 2 #define G4X_P2_DISPLAY_PORT_SLOW 10 #define G4X_P2_DISPLAY_PORT_FAST 10 #define G4X_P2_DISPLAY_PORT_LIMIT 0 /* Ironlake / Sandybridge */ /* as we calculate clock using (register_value + 2) for N/M1/M2, so here the range value for them is (actual_value-2). */ #define IRONLAKE_DOT_MIN 25000 #define IRONLAKE_DOT_MAX 350000 #define IRONLAKE_VCO_MIN 1760000 #define IRONLAKE_VCO_MAX 3510000 #define IRONLAKE_M1_MIN 12 #define IRONLAKE_M1_MAX 22 #define IRONLAKE_M2_MIN 5 #define IRONLAKE_M2_MAX 9 #define IRONLAKE_P2_DOT_LIMIT 225000 /* 225Mhz */ /* We have parameter ranges for different type of outputs. */ /* DAC & HDMI Refclk 120Mhz */ #define IRONLAKE_DAC_N_MIN 1 #define IRONLAKE_DAC_N_MAX 5 #define IRONLAKE_DAC_M_MIN 79 #define IRONLAKE_DAC_M_MAX 127 #define IRONLAKE_DAC_P_MIN 5 #define IRONLAKE_DAC_P_MAX 80 #define IRONLAKE_DAC_P1_MIN 1 #define IRONLAKE_DAC_P1_MAX 8 #define IRONLAKE_DAC_P2_SLOW 10 #define IRONLAKE_DAC_P2_FAST 5 /* LVDS single-channel 120Mhz refclk */ #define IRONLAKE_LVDS_S_N_MIN 1 #define IRONLAKE_LVDS_S_N_MAX 3 #define IRONLAKE_LVDS_S_M_MIN 79 #define IRONLAKE_LVDS_S_M_MAX 118 #define IRONLAKE_LVDS_S_P_MIN 28 #define IRONLAKE_LVDS_S_P_MAX 112 #define IRONLAKE_LVDS_S_P1_MIN 2 #define IRONLAKE_LVDS_S_P1_MAX 8 #define IRONLAKE_LVDS_S_P2_SLOW 14 #define IRONLAKE_LVDS_S_P2_FAST 14 /* LVDS dual-channel 120Mhz refclk */ #define IRONLAKE_LVDS_D_N_MIN 1 #define IRONLAKE_LVDS_D_N_MAX 3 #define IRONLAKE_LVDS_D_M_MIN 79 #define IRONLAKE_LVDS_D_M_MAX 127 #define IRONLAKE_LVDS_D_P_MIN 14 #define IRONLAKE_LVDS_D_P_MAX 56 #define IRONLAKE_LVDS_D_P1_MIN 2 #define IRONLAKE_LVDS_D_P1_MAX 8 #define IRONLAKE_LVDS_D_P2_SLOW 7 #define IRONLAKE_LVDS_D_P2_FAST 7 /* LVDS single-channel 100Mhz refclk */ #define IRONLAKE_LVDS_S_SSC_N_MIN 1 #define IRONLAKE_LVDS_S_SSC_N_MAX 2 #define IRONLAKE_LVDS_S_SSC_M_MIN 79 #define IRONLAKE_LVDS_S_SSC_M_MAX 126 #define IRONLAKE_LVDS_S_SSC_P_MIN 28 #define IRONLAKE_LVDS_S_SSC_P_MAX 112 #define IRONLAKE_LVDS_S_SSC_P1_MIN 2 #define IRONLAKE_LVDS_S_SSC_P1_MAX 8 #define IRONLAKE_LVDS_S_SSC_P2_SLOW 14 #define IRONLAKE_LVDS_S_SSC_P2_FAST 14 /* LVDS dual-channel 100Mhz refclk */ #define IRONLAKE_LVDS_D_SSC_N_MIN 1 #define IRONLAKE_LVDS_D_SSC_N_MAX 3 #define IRONLAKE_LVDS_D_SSC_M_MIN 79 #define IRONLAKE_LVDS_D_SSC_M_MAX 126 #define IRONLAKE_LVDS_D_SSC_P_MIN 14 #define IRONLAKE_LVDS_D_SSC_P_MAX 42 #define IRONLAKE_LVDS_D_SSC_P1_MIN 2 #define IRONLAKE_LVDS_D_SSC_P1_MAX 6 #define IRONLAKE_LVDS_D_SSC_P2_SLOW 7 #define IRONLAKE_LVDS_D_SSC_P2_FAST 7 /* DisplayPort */ #define IRONLAKE_DP_N_MIN 1 #define IRONLAKE_DP_N_MAX 2 #define IRONLAKE_DP_M_MIN 81 #define IRONLAKE_DP_M_MAX 90 #define IRONLAKE_DP_P_MIN 10 #define IRONLAKE_DP_P_MAX 20 #define IRONLAKE_DP_P2_FAST 10 #define IRONLAKE_DP_P2_SLOW 10 #define IRONLAKE_DP_P2_LIMIT 0 #define IRONLAKE_DP_P1_MIN 1 #define IRONLAKE_DP_P1_MAX 2 static bool intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); static bool intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); static bool intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); static bool intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); static const intel_limit_t intel_limits_i8xx_dvo = { .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX }, .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX }, .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX }, .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX }, .p1 = { .min = I8XX_P1_MIN, .max = I8XX_P1_MAX }, .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, .p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST }, .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_i8xx_lvds = { .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX }, .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX }, .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX }, .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX }, .p1 = { .min = I8XX_P1_LVDS_MIN, .max = I8XX_P1_LVDS_MAX }, .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, .p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST }, .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_i9xx_sdvo = { .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX }, .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX }, .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX }, .p = { .min = I9XX_P_SDVO_DAC_MIN, .max = I9XX_P_SDVO_DAC_MAX }, .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_i9xx_lvds = { .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX }, .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX }, .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX }, .p = { .min = I9XX_P_LVDS_MIN, .max = I9XX_P_LVDS_MAX }, .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, /* The single-channel range is 25-112Mhz, and dual-channel * is 80-224Mhz. Prefer single channel as much as possible. */ .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST }, .find_pll = intel_find_best_PLL, }; /* below parameter and function is for G4X Chipset Family*/ static const intel_limit_t intel_limits_g4x_sdvo = { .dot = { .min = G4X_DOT_SDVO_MIN, .max = G4X_DOT_SDVO_MAX }, .vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX}, .n = { .min = G4X_N_SDVO_MIN, .max = G4X_N_SDVO_MAX }, .m = { .min = G4X_M_SDVO_MIN, .max = G4X_M_SDVO_MAX }, .m1 = { .min = G4X_M1_SDVO_MIN, .max = G4X_M1_SDVO_MAX }, .m2 = { .min = G4X_M2_SDVO_MIN, .max = G4X_M2_SDVO_MAX }, .p = { .min = G4X_P_SDVO_MIN, .max = G4X_P_SDVO_MAX }, .p1 = { .min = G4X_P1_SDVO_MIN, .max = G4X_P1_SDVO_MAX}, .p2 = { .dot_limit = G4X_P2_SDVO_LIMIT, .p2_slow = G4X_P2_SDVO_SLOW, .p2_fast = G4X_P2_SDVO_FAST }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_hdmi = { .dot = { .min = G4X_DOT_HDMI_DAC_MIN, .max = G4X_DOT_HDMI_DAC_MAX }, .vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX}, .n = { .min = G4X_N_HDMI_DAC_MIN, .max = G4X_N_HDMI_DAC_MAX }, .m = { .min = G4X_M_HDMI_DAC_MIN, .max = G4X_M_HDMI_DAC_MAX }, .m1 = { .min = G4X_M1_HDMI_DAC_MIN, .max = G4X_M1_HDMI_DAC_MAX }, .m2 = { .min = G4X_M2_HDMI_DAC_MIN, .max = G4X_M2_HDMI_DAC_MAX }, .p = { .min = G4X_P_HDMI_DAC_MIN, .max = G4X_P_HDMI_DAC_MAX }, .p1 = { .min = G4X_P1_HDMI_DAC_MIN, .max = G4X_P1_HDMI_DAC_MAX}, .p2 = { .dot_limit = G4X_P2_HDMI_DAC_LIMIT, .p2_slow = G4X_P2_HDMI_DAC_SLOW, .p2_fast = G4X_P2_HDMI_DAC_FAST }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_single_channel_lvds = { .dot = { .min = G4X_DOT_SINGLE_CHANNEL_LVDS_MIN, .max = G4X_DOT_SINGLE_CHANNEL_LVDS_MAX }, .vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX }, .n = { .min = G4X_N_SINGLE_CHANNEL_LVDS_MIN, .max = G4X_N_SINGLE_CHANNEL_LVDS_MAX }, .m = { .min = G4X_M_SINGLE_CHANNEL_LVDS_MIN, .max = G4X_M_SINGLE_CHANNEL_LVDS_MAX }, .m1 = { .min = G4X_M1_SINGLE_CHANNEL_LVDS_MIN, .max = G4X_M1_SINGLE_CHANNEL_LVDS_MAX }, .m2 = { .min = G4X_M2_SINGLE_CHANNEL_LVDS_MIN, .max = G4X_M2_SINGLE_CHANNEL_LVDS_MAX }, .p = { .min = G4X_P_SINGLE_CHANNEL_LVDS_MIN, .max = G4X_P_SINGLE_CHANNEL_LVDS_MAX }, .p1 = { .min = G4X_P1_SINGLE_CHANNEL_LVDS_MIN, .max = G4X_P1_SINGLE_CHANNEL_LVDS_MAX }, .p2 = { .dot_limit = G4X_P2_SINGLE_CHANNEL_LVDS_LIMIT, .p2_slow = G4X_P2_SINGLE_CHANNEL_LVDS_SLOW, .p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_dual_channel_lvds = { .dot = { .min = G4X_DOT_DUAL_CHANNEL_LVDS_MIN, .max = G4X_DOT_DUAL_CHANNEL_LVDS_MAX }, .vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX }, .n = { .min = G4X_N_DUAL_CHANNEL_LVDS_MIN, .max = G4X_N_DUAL_CHANNEL_LVDS_MAX }, .m = { .min = G4X_M_DUAL_CHANNEL_LVDS_MIN, .max = G4X_M_DUAL_CHANNEL_LVDS_MAX }, .m1 = { .min = G4X_M1_DUAL_CHANNEL_LVDS_MIN, .max = G4X_M1_DUAL_CHANNEL_LVDS_MAX }, .m2 = { .min = G4X_M2_DUAL_CHANNEL_LVDS_MIN, .max = G4X_M2_DUAL_CHANNEL_LVDS_MAX }, .p = { .min = G4X_P_DUAL_CHANNEL_LVDS_MIN, .max = G4X_P_DUAL_CHANNEL_LVDS_MAX }, .p1 = { .min = G4X_P1_DUAL_CHANNEL_LVDS_MIN, .max = G4X_P1_DUAL_CHANNEL_LVDS_MAX }, .p2 = { .dot_limit = G4X_P2_DUAL_CHANNEL_LVDS_LIMIT, .p2_slow = G4X_P2_DUAL_CHANNEL_LVDS_SLOW, .p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_display_port = { .dot = { .min = G4X_DOT_DISPLAY_PORT_MIN, .max = G4X_DOT_DISPLAY_PORT_MAX }, .vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX}, .n = { .min = G4X_N_DISPLAY_PORT_MIN, .max = G4X_N_DISPLAY_PORT_MAX }, .m = { .min = G4X_M_DISPLAY_PORT_MIN, .max = G4X_M_DISPLAY_PORT_MAX }, .m1 = { .min = G4X_M1_DISPLAY_PORT_MIN, .max = G4X_M1_DISPLAY_PORT_MAX }, .m2 = { .min = G4X_M2_DISPLAY_PORT_MIN, .max = G4X_M2_DISPLAY_PORT_MAX }, .p = { .min = G4X_P_DISPLAY_PORT_MIN, .max = G4X_P_DISPLAY_PORT_MAX }, .p1 = { .min = G4X_P1_DISPLAY_PORT_MIN, .max = G4X_P1_DISPLAY_PORT_MAX}, .p2 = { .dot_limit = G4X_P2_DISPLAY_PORT_LIMIT, .p2_slow = G4X_P2_DISPLAY_PORT_SLOW, .p2_fast = G4X_P2_DISPLAY_PORT_FAST }, .find_pll = intel_find_pll_g4x_dp, }; static const intel_limit_t intel_limits_pineview_sdvo = { .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX}, .vco = { .min = PINEVIEW_VCO_MIN, .max = PINEVIEW_VCO_MAX }, .n = { .min = PINEVIEW_N_MIN, .max = PINEVIEW_N_MAX }, .m = { .min = PINEVIEW_M_MIN, .max = PINEVIEW_M_MAX }, .m1 = { .min = PINEVIEW_M1_MIN, .max = PINEVIEW_M1_MAX }, .m2 = { .min = PINEVIEW_M2_MIN, .max = PINEVIEW_M2_MAX }, .p = { .min = I9XX_P_SDVO_DAC_MIN, .max = I9XX_P_SDVO_DAC_MAX }, .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_pineview_lvds = { .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, .vco = { .min = PINEVIEW_VCO_MIN, .max = PINEVIEW_VCO_MAX }, .n = { .min = PINEVIEW_N_MIN, .max = PINEVIEW_N_MAX }, .m = { .min = PINEVIEW_M_MIN, .max = PINEVIEW_M_MAX }, .m1 = { .min = PINEVIEW_M1_MIN, .max = PINEVIEW_M1_MAX }, .m2 = { .min = PINEVIEW_M2_MIN, .max = PINEVIEW_M2_MAX }, .p = { .min = PINEVIEW_P_LVDS_MIN, .max = PINEVIEW_P_LVDS_MAX }, .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, /* Pineview only supports single-channel mode. */ .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW }, .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_dac = { .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX }, .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX }, .n = { .min = IRONLAKE_DAC_N_MIN, .max = IRONLAKE_DAC_N_MAX }, .m = { .min = IRONLAKE_DAC_M_MIN, .max = IRONLAKE_DAC_M_MAX }, .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX }, .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX }, .p = { .min = IRONLAKE_DAC_P_MIN, .max = IRONLAKE_DAC_P_MAX }, .p1 = { .min = IRONLAKE_DAC_P1_MIN, .max = IRONLAKE_DAC_P1_MAX }, .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT, .p2_slow = IRONLAKE_DAC_P2_SLOW, .p2_fast = IRONLAKE_DAC_P2_FAST }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_single_lvds = { .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX }, .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX }, .n = { .min = IRONLAKE_LVDS_S_N_MIN, .max = IRONLAKE_LVDS_S_N_MAX }, .m = { .min = IRONLAKE_LVDS_S_M_MIN, .max = IRONLAKE_LVDS_S_M_MAX }, .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX }, .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX }, .p = { .min = IRONLAKE_LVDS_S_P_MIN, .max = IRONLAKE_LVDS_S_P_MAX }, .p1 = { .min = IRONLAKE_LVDS_S_P1_MIN, .max = IRONLAKE_LVDS_S_P1_MAX }, .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT, .p2_slow = IRONLAKE_LVDS_S_P2_SLOW, .p2_fast = IRONLAKE_LVDS_S_P2_FAST }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_dual_lvds = { .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX }, .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX }, .n = { .min = IRONLAKE_LVDS_D_N_MIN, .max = IRONLAKE_LVDS_D_N_MAX }, .m = { .min = IRONLAKE_LVDS_D_M_MIN, .max = IRONLAKE_LVDS_D_M_MAX }, .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX }, .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX }, .p = { .min = IRONLAKE_LVDS_D_P_MIN, .max = IRONLAKE_LVDS_D_P_MAX }, .p1 = { .min = IRONLAKE_LVDS_D_P1_MIN, .max = IRONLAKE_LVDS_D_P1_MAX }, .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT, .p2_slow = IRONLAKE_LVDS_D_P2_SLOW, .p2_fast = IRONLAKE_LVDS_D_P2_FAST }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_single_lvds_100m = { .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX }, .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX }, .n = { .min = IRONLAKE_LVDS_S_SSC_N_MIN, .max = IRONLAKE_LVDS_S_SSC_N_MAX }, .m = { .min = IRONLAKE_LVDS_S_SSC_M_MIN, .max = IRONLAKE_LVDS_S_SSC_M_MAX }, .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX }, .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX }, .p = { .min = IRONLAKE_LVDS_S_SSC_P_MIN, .max = IRONLAKE_LVDS_S_SSC_P_MAX }, .p1 = { .min = IRONLAKE_LVDS_S_SSC_P1_MIN,.max = IRONLAKE_LVDS_S_SSC_P1_MAX }, .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT, .p2_slow = IRONLAKE_LVDS_S_SSC_P2_SLOW, .p2_fast = IRONLAKE_LVDS_S_SSC_P2_FAST }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = { .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX }, .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX }, .n = { .min = IRONLAKE_LVDS_D_SSC_N_MIN, .max = IRONLAKE_LVDS_D_SSC_N_MAX }, .m = { .min = IRONLAKE_LVDS_D_SSC_M_MIN, .max = IRONLAKE_LVDS_D_SSC_M_MAX }, .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX }, .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX }, .p = { .min = IRONLAKE_LVDS_D_SSC_P_MIN, .max = IRONLAKE_LVDS_D_SSC_P_MAX }, .p1 = { .min = IRONLAKE_LVDS_D_SSC_P1_MIN,.max = IRONLAKE_LVDS_D_SSC_P1_MAX }, .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT, .p2_slow = IRONLAKE_LVDS_D_SSC_P2_SLOW, .p2_fast = IRONLAKE_LVDS_D_SSC_P2_FAST }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_display_port = { .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX }, .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX}, .n = { .min = IRONLAKE_DP_N_MIN, .max = IRONLAKE_DP_N_MAX }, .m = { .min = IRONLAKE_DP_M_MIN, .max = IRONLAKE_DP_M_MAX }, .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX }, .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX }, .p = { .min = IRONLAKE_DP_P_MIN, .max = IRONLAKE_DP_P_MAX }, .p1 = { .min = IRONLAKE_DP_P1_MIN, .max = IRONLAKE_DP_P1_MAX}, .p2 = { .dot_limit = IRONLAKE_DP_P2_LIMIT, .p2_slow = IRONLAKE_DP_P2_SLOW, .p2_fast = IRONLAKE_DP_P2_FAST }, .find_pll = intel_find_pll_ironlake_dp, }; static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; const intel_limit_t *limit; int refclk = 120; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { if (dev_priv->lvds_use_ssc && dev_priv->lvds_ssc_freq == 100) refclk = 100; if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) { /* LVDS dual channel */ if (refclk == 100) limit = &intel_limits_ironlake_dual_lvds_100m; else limit = &intel_limits_ironlake_dual_lvds; } else { if (refclk == 100) limit = &intel_limits_ironlake_single_lvds_100m; else limit = &intel_limits_ironlake_single_lvds; } } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || HAS_eDP) limit = &intel_limits_ironlake_display_port; else limit = &intel_limits_ironlake_dac; return limit; } static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; const intel_limit_t *limit; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) /* LVDS with dual channel */ limit = &intel_limits_g4x_dual_channel_lvds; else /* LVDS with dual channel */ limit = &intel_limits_g4x_single_channel_lvds; } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) || intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) { limit = &intel_limits_g4x_hdmi; } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) { limit = &intel_limits_g4x_sdvo; } else if (intel_pipe_has_type (crtc, INTEL_OUTPUT_DISPLAYPORT)) { limit = &intel_limits_g4x_display_port; } else /* The option is for other outputs */ limit = &intel_limits_i9xx_sdvo; return limit; } static const intel_limit_t *intel_limit(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; const intel_limit_t *limit; if (HAS_PCH_SPLIT(dev)) limit = intel_ironlake_limit(crtc); else if (IS_G4X(dev)) { limit = intel_g4x_limit(crtc); } else if (IS_I9XX(dev) && !IS_PINEVIEW(dev)) { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) limit = &intel_limits_i9xx_lvds; else limit = &intel_limits_i9xx_sdvo; } else if (IS_PINEVIEW(dev)) { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) limit = &intel_limits_pineview_lvds; else limit = &intel_limits_pineview_sdvo; } else { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) limit = &intel_limits_i8xx_lvds; else limit = &intel_limits_i8xx_dvo; } return limit; } /* m1 is reserved as 0 in Pineview, n is a ring counter */ static void pineview_clock(int refclk, intel_clock_t *clock) { clock->m = clock->m2 + 2; clock->p = clock->p1 * clock->p2; clock->vco = refclk * clock->m / clock->n; clock->dot = clock->vco / clock->p; } static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock) { if (IS_PINEVIEW(dev)) { pineview_clock(refclk, clock); return; } clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); clock->p = clock->p1 * clock->p2; clock->vco = refclk * clock->m / (clock->n + 2); clock->dot = clock->vco / clock->p; } /** * Returns whether any output on the specified pipe is of the specified type */ bool intel_pipe_has_type (struct drm_crtc *crtc, int type) { struct drm_device *dev = crtc->dev; struct drm_mode_config *mode_config = &dev->mode_config; struct drm_connector *l_entry; list_for_each_entry(l_entry, &mode_config->connector_list, head) { if (l_entry->encoder && l_entry->encoder->crtc == crtc) { struct intel_output *intel_output = to_intel_output(l_entry); if (intel_output->type == type) return true; } } return false; } struct drm_connector * intel_pipe_get_output (struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_mode_config *mode_config = &dev->mode_config; struct drm_connector *l_entry, *ret = NULL; list_for_each_entry(l_entry, &mode_config->connector_list, head) { if (l_entry->encoder && l_entry->encoder->crtc == crtc) { ret = l_entry; break; } } return ret; } #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0) /** * Returns whether the given set of divisors are valid for a given refclk with * the given connectors. */ static bool intel_PLL_is_valid(struct drm_crtc *crtc, intel_clock_t *clock) { const intel_limit_t *limit = intel_limit (crtc); struct drm_device *dev = crtc->dev; if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) INTELPllInvalid ("p1 out of range\n"); if (clock->p < limit->p.min || limit->p.max < clock->p) INTELPllInvalid ("p out of range\n"); if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) INTELPllInvalid ("m2 out of range\n"); if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) INTELPllInvalid ("m1 out of range\n"); if (clock->m1 <= clock->m2 && !IS_PINEVIEW(dev)) INTELPllInvalid ("m1 <= m2\n"); if (clock->m < limit->m.min || limit->m.max < clock->m) INTELPllInvalid ("m out of range\n"); if (clock->n < limit->n.min || limit->n.max < clock->n) INTELPllInvalid ("n out of range\n"); if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) INTELPllInvalid ("vco out of range\n"); /* XXX: We may need to be checking "Dot clock" depending on the multiplier, * connector, etc., rather than just a single range. */ if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) INTELPllInvalid ("dot out of range\n"); return true; } static bool intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; intel_clock_t clock; int err = target; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && (I915_READ(LVDS)) != 0) { /* * For LVDS, if the panel is on, just rely on its current * settings for dual-channel. We haven't figured out how to * reliably set up different single/dual channel state, if we * even can. */ if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) clock.p2 = limit->p2.p2_fast; else clock.p2 = limit->p2.p2_slow; } else { if (target < limit->p2.dot_limit) clock.p2 = limit->p2.p2_slow; else clock.p2 = limit->p2.p2_fast; } memset (best_clock, 0, sizeof (*best_clock)); for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max; clock.m2++) { /* m1 is always 0 in Pineview */ if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev)) break; for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) { for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max; clock.p1++) { int this_err; intel_clock(dev, refclk, &clock); if (!intel_PLL_is_valid(crtc, &clock)) continue; this_err = abs(clock.dot - target); if (this_err < err) { *best_clock = clock; err = this_err; } } } } } return (err != target); } static bool intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; intel_clock_t clock; int max_n; bool found; /* approximately equals target * 0.00488 */ int err_most = (target >> 8) + (target >> 10); found = false; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { int lvds_reg; if (IS_IRONLAKE(dev)) lvds_reg = PCH_LVDS; else lvds_reg = LVDS; if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) clock.p2 = limit->p2.p2_fast; else clock.p2 = limit->p2.p2_slow; } else { if (target < limit->p2.dot_limit) clock.p2 = limit->p2.p2_slow; else clock.p2 = limit->p2.p2_fast; } memset(best_clock, 0, sizeof(*best_clock)); max_n = limit->n.max; /* based on hardware requriment prefer smaller n to precision */ for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) { /* based on hardware requirment prefere larger m1,m2 */ for (clock.m1 = limit->m1.max; clock.m1 >= limit->m1.min; clock.m1--) { for (clock.m2 = limit->m2.max; clock.m2 >= limit->m2.min; clock.m2--) { for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) { int this_err; intel_clock(dev, refclk, &clock); if (!intel_PLL_is_valid(crtc, &clock)) continue; this_err = abs(clock.dot - target) ; if (this_err < err_most) { *best_clock = clock; err_most = this_err; max_n = clock.n; found = true; } } } } } return found; } static bool intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock) { struct drm_device *dev = crtc->dev; intel_clock_t clock; /* return directly when it is eDP */ if (HAS_eDP) return true; if (target < 200000) { clock.n = 1; clock.p1 = 2; clock.p2 = 10; clock.m1 = 12; clock.m2 = 9; } else { clock.n = 2; clock.p1 = 1; clock.p2 = 10; clock.m1 = 14; clock.m2 = 8; } intel_clock(dev, refclk, &clock); memcpy(best_clock, &clock, sizeof(intel_clock_t)); return true; } /* DisplayPort has only two frequencies, 162MHz and 270MHz */ static bool intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock) { intel_clock_t clock; if (target < 200000) { clock.p1 = 2; clock.p2 = 10; clock.n = 2; clock.m1 = 23; clock.m2 = 8; } else { clock.p1 = 1; clock.p2 = 10; clock.n = 1; clock.m1 = 14; clock.m2 = 2; } clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2); clock.p = (clock.p1 * clock.p2); clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p; clock.vco = 0; memcpy(best_clock, &clock, sizeof(intel_clock_t)); return true; } void intel_wait_for_vblank(struct drm_device *dev) { /* Wait for 20ms, i.e. one cycle at 50hz. */ msleep(20); } /* Parameters have changed, update FBC info */ static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_framebuffer *fb = crtc->fb; struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); struct drm_i915_gem_object *obj_priv = intel_fb->obj->driver_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int plane, i; u32 fbc_ctl, fbc_ctl2; dev_priv->cfb_pitch = dev_priv->cfb_size / FBC_LL_SIZE; if (fb->pitch < dev_priv->cfb_pitch) dev_priv->cfb_pitch = fb->pitch; /* FBC_CTL wants 64B units */ dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1; dev_priv->cfb_fence = obj_priv->fence_reg; dev_priv->cfb_plane = intel_crtc->plane; plane = dev_priv->cfb_plane == 0 ? FBC_CTL_PLANEA : FBC_CTL_PLANEB; /* Clear old tags */ for (i = 0; i < (FBC_LL_SIZE / 32) + 1; i++) I915_WRITE(FBC_TAG + (i * 4), 0); /* Set it up... */ fbc_ctl2 = FBC_CTL_FENCE_DBL | FBC_CTL_IDLE_IMM | plane; if (obj_priv->tiling_mode != I915_TILING_NONE) fbc_ctl2 |= FBC_CTL_CPU_FENCE; I915_WRITE(FBC_CONTROL2, fbc_ctl2); I915_WRITE(FBC_FENCE_OFF, crtc->y); /* enable it... */ fbc_ctl = FBC_CTL_EN | FBC_CTL_PERIODIC; if (IS_I945GM(dev)) fbc_ctl |= FBC_C3_IDLE; /* 945 needs special SR handling */ fbc_ctl |= (dev_priv->cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT; fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT; if (obj_priv->tiling_mode != I915_TILING_NONE) fbc_ctl |= dev_priv->cfb_fence; I915_WRITE(FBC_CONTROL, fbc_ctl); DRM_DEBUG_KMS("enabled FBC, pitch %ld, yoff %d, plane %d, ", dev_priv->cfb_pitch, crtc->y, dev_priv->cfb_plane); } void i8xx_disable_fbc(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 fbc_ctl; if (!I915_HAS_FBC(dev)) return; /* Disable compression */ fbc_ctl = I915_READ(FBC_CONTROL); fbc_ctl &= ~FBC_CTL_EN; I915_WRITE(FBC_CONTROL, fbc_ctl); /* Wait for compressing bit to clear */ while (I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) ; /* nothing */ intel_wait_for_vblank(dev); DRM_DEBUG_KMS("disabled FBC\n"); } static bool i8xx_fbc_enabled(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; return I915_READ(FBC_CONTROL) & FBC_CTL_EN; } static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_framebuffer *fb = crtc->fb; struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); struct drm_i915_gem_object *obj_priv = intel_fb->obj->driver_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int plane = (intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB); unsigned long stall_watermark = 200; u32 dpfc_ctl; dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1; dev_priv->cfb_fence = obj_priv->fence_reg; dev_priv->cfb_plane = intel_crtc->plane; dpfc_ctl = plane | DPFC_SR_EN | DPFC_CTL_LIMIT_1X; if (obj_priv->tiling_mode != I915_TILING_NONE) { dpfc_ctl |= DPFC_CTL_FENCE_EN | dev_priv->cfb_fence; I915_WRITE(DPFC_CHICKEN, DPFC_HT_MODIFY); } else { I915_WRITE(DPFC_CHICKEN, ~DPFC_HT_MODIFY); } I915_WRITE(DPFC_CONTROL, dpfc_ctl); I915_WRITE(DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN | (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) | (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT)); I915_WRITE(DPFC_FENCE_YOFF, crtc->y); /* enable it... */ I915_WRITE(DPFC_CONTROL, I915_READ(DPFC_CONTROL) | DPFC_CTL_EN); DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane); } void g4x_disable_fbc(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 dpfc_ctl; /* Disable compression */ dpfc_ctl = I915_READ(DPFC_CONTROL); dpfc_ctl &= ~DPFC_CTL_EN; I915_WRITE(DPFC_CONTROL, dpfc_ctl); intel_wait_for_vblank(dev); DRM_DEBUG_KMS("disabled FBC\n"); } static bool g4x_fbc_enabled(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; return I915_READ(DPFC_CONTROL) & DPFC_CTL_EN; } /** * intel_update_fbc - enable/disable FBC as needed * @crtc: CRTC to point the compressor at * @mode: mode in use * * Set up the framebuffer compression hardware at mode set time. We * enable it if possible: * - plane A only (on pre-965) * - no pixel mulitply/line duplication * - no alpha buffer discard * - no dual wide * - framebuffer <= 2048 in width, 1536 in height * * We can't assume that any compression will take place (worst case), * so the compressed buffer has to be the same size as the uncompressed * one. It also must reside (along with the line length buffer) in * stolen memory. * * We need to enable/disable FBC on a global basis. */ static void intel_update_fbc(struct drm_crtc *crtc, struct drm_display_mode *mode) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_framebuffer *fb = crtc->fb; struct intel_framebuffer *intel_fb; struct drm_i915_gem_object *obj_priv; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int plane = intel_crtc->plane; if (!i915_powersave) return; if (!dev_priv->display.fbc_enabled || !dev_priv->display.enable_fbc || !dev_priv->display.disable_fbc) return; if (!crtc->fb) return; intel_fb = to_intel_framebuffer(fb); obj_priv = intel_fb->obj->driver_private; /* * If FBC is already on, we just have to verify that we can * keep it that way... * Need to disable if: * - changing FBC params (stride, fence, mode) * - new fb is too large to fit in compressed buffer * - going to an unsupported config (interlace, pixel multiply, etc.) */ if (intel_fb->obj->size > dev_priv->cfb_size) { DRM_DEBUG_KMS("framebuffer too large, disabling " "compression\n"); dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL; goto out_disable; } if ((mode->flags & DRM_MODE_FLAG_INTERLACE) || (mode->flags & DRM_MODE_FLAG_DBLSCAN)) { DRM_DEBUG_KMS("mode incompatible with compression, " "disabling\n"); dev_priv->no_fbc_reason = FBC_UNSUPPORTED_MODE; goto out_disable; } if ((mode->hdisplay > 2048) || (mode->vdisplay > 1536)) { DRM_DEBUG_KMS("mode too large for compression, disabling\n"); dev_priv->no_fbc_reason = FBC_MODE_TOO_LARGE; goto out_disable; } if ((IS_I915GM(dev) || IS_I945GM(dev)) && plane != 0) { DRM_DEBUG_KMS("plane not 0, disabling compression\n"); dev_priv->no_fbc_reason = FBC_BAD_PLANE; goto out_disable; } if (obj_priv->tiling_mode != I915_TILING_X) { DRM_DEBUG_KMS("framebuffer not tiled, disabling compression\n"); dev_priv->no_fbc_reason = FBC_NOT_TILED; goto out_disable; } if (dev_priv->display.fbc_enabled(crtc)) { /* We can re-enable it in this case, but need to update pitch */ if (fb->pitch > dev_priv->cfb_pitch) dev_priv->display.disable_fbc(dev); if (obj_priv->fence_reg != dev_priv->cfb_fence) dev_priv->display.disable_fbc(dev); if (plane != dev_priv->cfb_plane) dev_priv->display.disable_fbc(dev); } if (!dev_priv->display.fbc_enabled(crtc)) { /* Now try to turn it back on if possible */ dev_priv->display.enable_fbc(crtc, 500); } return; out_disable: DRM_DEBUG_KMS("unsupported config, disabling FBC\n"); /* Multiple disables should be harmless */ if (dev_priv->display.fbc_enabled(crtc)) dev_priv->display.disable_fbc(dev); } static int intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_gem_object *obj) { struct drm_i915_gem_object *obj_priv = obj->driver_private; u32 alignment; int ret; switch (obj_priv->tiling_mode) { case I915_TILING_NONE: alignment = 64 * 1024; break; case I915_TILING_X: /* pin() will align the object as required by fence */ alignment = 0; break; case I915_TILING_Y: /* FIXME: Is this true? */ DRM_ERROR("Y tiled not allowed for scan out buffers\n"); return -EINVAL; default: BUG(); } ret = i915_gem_object_pin(obj, alignment); if (ret != 0) return ret; /* Install a fence for tiled scan-out. Pre-i965 always needs a * fence, whereas 965+ only requires a fence if using * framebuffer compression. For simplicity, we always install * a fence as the cost is not that onerous. */ if (obj_priv->fence_reg == I915_FENCE_REG_NONE && obj_priv->tiling_mode != I915_TILING_NONE) { ret = i915_gem_object_get_fence_reg(obj); if (ret != 0) { i915_gem_object_unpin(obj); return ret; } } return 0; } static int intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_master_private *master_priv; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_framebuffer *intel_fb; struct drm_i915_gem_object *obj_priv; struct drm_gem_object *obj; int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; unsigned long Start, Offset; int dspbase = (plane == 0 ? DSPAADDR : DSPBADDR); int dspsurf = (plane == 0 ? DSPASURF : DSPBSURF); int dspstride = (plane == 0) ? DSPASTRIDE : DSPBSTRIDE; int dsptileoff = (plane == 0 ? DSPATILEOFF : DSPBTILEOFF); int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; u32 dspcntr; int ret; /* no fb bound */ if (!crtc->fb) { DRM_DEBUG_KMS("No FB bound\n"); return 0; } switch (plane) { case 0: case 1: break; default: DRM_ERROR("Can't update plane %d in SAREA\n", plane); return -EINVAL; } intel_fb = to_intel_framebuffer(crtc->fb); obj = intel_fb->obj; obj_priv = obj->driver_private; mutex_lock(&dev->struct_mutex); ret = intel_pin_and_fence_fb_obj(dev, obj); if (ret != 0) { mutex_unlock(&dev->struct_mutex); return ret; } ret = i915_gem_object_set_to_display_plane(obj); if (ret != 0) { i915_gem_object_unpin(obj); mutex_unlock(&dev->struct_mutex); return ret; } dspcntr = I915_READ(dspcntr_reg); /* Mask out pixel format bits in case we change it */ dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; switch (crtc->fb->bits_per_pixel) { case 8: dspcntr |= DISPPLANE_8BPP; break; case 16: if (crtc->fb->depth == 15) dspcntr |= DISPPLANE_15_16BPP; else dspcntr |= DISPPLANE_16BPP; break; case 24: case 32: if (crtc->fb->depth == 30) dspcntr |= DISPPLANE_32BPP_30BIT_NO_ALPHA; else dspcntr |= DISPPLANE_32BPP_NO_ALPHA; break; default: DRM_ERROR("Unknown color depth\n"); i915_gem_object_unpin(obj); mutex_unlock(&dev->struct_mutex); return -EINVAL; } if (IS_I965G(dev)) { if (obj_priv->tiling_mode != I915_TILING_NONE) dspcntr |= DISPPLANE_TILED; else dspcntr &= ~DISPPLANE_TILED; } if (HAS_PCH_SPLIT(dev)) /* must disable */ dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE; I915_WRITE(dspcntr_reg, dspcntr); Start = obj_priv->gtt_offset; Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8); DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y); I915_WRITE(dspstride, crtc->fb->pitch); if (IS_I965G(dev)) { I915_WRITE(dspbase, Offset); I915_READ(dspbase); I915_WRITE(dspsurf, Start); I915_READ(dspsurf); I915_WRITE(dsptileoff, (y << 16) | x); } else { I915_WRITE(dspbase, Start + Offset); I915_READ(dspbase); } if ((IS_I965G(dev) || plane == 0)) intel_update_fbc(crtc, &crtc->mode); intel_wait_for_vblank(dev); if (old_fb) { intel_fb = to_intel_framebuffer(old_fb); obj_priv = intel_fb->obj->driver_private; i915_gem_object_unpin(intel_fb->obj); } intel_increase_pllclock(crtc, true); mutex_unlock(&dev->struct_mutex); if (!dev->primary->master) return 0; master_priv = dev->primary->master->driver_priv; if (!master_priv->sarea_priv) return 0; if (pipe) { master_priv->sarea_priv->pipeB_x = x; master_priv->sarea_priv->pipeB_y = y; } else { master_priv->sarea_priv->pipeA_x = x; master_priv->sarea_priv->pipeA_y = y; } return 0; } /* Disable the VGA plane that we never use */ static void i915_disable_vga (struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u8 sr1; u32 vga_reg; if (HAS_PCH_SPLIT(dev)) vga_reg = CPU_VGACNTRL; else vga_reg = VGACNTRL; if (I915_READ(vga_reg) & VGA_DISP_DISABLE) return; I915_WRITE8(VGA_SR_INDEX, 1); sr1 = I915_READ8(VGA_SR_DATA); I915_WRITE8(VGA_SR_DATA, sr1 | (1 << 5)); udelay(100); I915_WRITE(vga_reg, VGA_DISP_DISABLE); } static void ironlake_disable_pll_edp (struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 dpa_ctl; DRM_DEBUG_KMS("\n"); dpa_ctl = I915_READ(DP_A); dpa_ctl &= ~DP_PLL_ENABLE; I915_WRITE(DP_A, dpa_ctl); } static void ironlake_enable_pll_edp (struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 dpa_ctl; dpa_ctl = I915_READ(DP_A); dpa_ctl |= DP_PLL_ENABLE; I915_WRITE(DP_A, dpa_ctl); udelay(200); } static void ironlake_set_pll_edp (struct drm_crtc *crtc, int clock) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 dpa_ctl; DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock); dpa_ctl = I915_READ(DP_A); dpa_ctl &= ~DP_PLL_FREQ_MASK; if (clock < 200000) { u32 temp; dpa_ctl |= DP_PLL_FREQ_160MHZ; /* workaround for 160Mhz: 1) program 0x4600c bits 15:0 = 0x8124 2) program 0x46010 bit 0 = 1 3) program 0x46034 bit 24 = 1 4) program 0x64000 bit 14 = 1 */ temp = I915_READ(0x4600c); temp &= 0xffff0000; I915_WRITE(0x4600c, temp | 0x8124); temp = I915_READ(0x46010); I915_WRITE(0x46010, temp | 1); temp = I915_READ(0x46034); I915_WRITE(0x46034, temp | (1 << 24)); } else { dpa_ctl |= DP_PLL_FREQ_270MHZ; } I915_WRITE(DP_A, dpa_ctl); udelay(500); } static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B; int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR; int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL; int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL; int fdi_rx_iir_reg = (pipe == 0) ? FDI_RXA_IIR : FDI_RXB_IIR; int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR; int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF; int pf_ctl_reg = (pipe == 0) ? PFA_CTL_1 : PFB_CTL_1; int pf_win_size = (pipe == 0) ? PFA_WIN_SZ : PFB_WIN_SZ; int pf_win_pos = (pipe == 0) ? PFA_WIN_POS : PFB_WIN_POS; int cpu_htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; int cpu_hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; int cpu_hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; int cpu_vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; int cpu_vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; int cpu_vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; int trans_htot_reg = (pipe == 0) ? TRANS_HTOTAL_A : TRANS_HTOTAL_B; int trans_hblank_reg = (pipe == 0) ? TRANS_HBLANK_A : TRANS_HBLANK_B; int trans_hsync_reg = (pipe == 0) ? TRANS_HSYNC_A : TRANS_HSYNC_B; int trans_vtot_reg = (pipe == 0) ? TRANS_VTOTAL_A : TRANS_VTOTAL_B; int trans_vblank_reg = (pipe == 0) ? TRANS_VBLANK_A : TRANS_VBLANK_B; int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B; u32 temp; int tries = 5, j, n; u32 pipe_bpc; temp = I915_READ(pipeconf_reg); pipe_bpc = temp & PIPE_BPC_MASK; /* XXX: When our outputs are all unaware of DPMS modes other than off * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. */ switch (mode) { case DRM_MODE_DPMS_ON: case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: DRM_DEBUG_KMS("crtc %d dpms on\n", pipe); if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { temp = I915_READ(PCH_LVDS); if ((temp & LVDS_PORT_EN) == 0) { I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN); POSTING_READ(PCH_LVDS); } } if (HAS_eDP) { /* enable eDP PLL */ ironlake_enable_pll_edp(crtc); } else { /* enable PCH DPLL */ temp = I915_READ(pch_dpll_reg); if ((temp & DPLL_VCO_ENABLE) == 0) { I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE); I915_READ(pch_dpll_reg); } /* enable PCH FDI RX PLL, wait warmup plus DMI latency */ temp = I915_READ(fdi_rx_reg); /* * make the BPC in FDI Rx be consistent with that in * pipeconf reg. */ temp &= ~(0x7 << 16); temp |= (pipe_bpc << 11); I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE | FDI_SEL_PCDCLK | FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */ I915_READ(fdi_rx_reg); udelay(200); /* Enable CPU FDI TX PLL, always on for Ironlake */ temp = I915_READ(fdi_tx_reg); if ((temp & FDI_TX_PLL_ENABLE) == 0) { I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE); I915_READ(fdi_tx_reg); udelay(100); } } /* Enable panel fitting for LVDS */ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { temp = I915_READ(pf_ctl_reg); I915_WRITE(pf_ctl_reg, temp | PF_ENABLE | PF_FILTER_MED_3x3); /* currently full aspect */ I915_WRITE(pf_win_pos, 0); I915_WRITE(pf_win_size, (dev_priv->panel_fixed_mode->hdisplay << 16) | (dev_priv->panel_fixed_mode->vdisplay)); } /* Enable CPU pipe */ temp = I915_READ(pipeconf_reg); if ((temp & PIPEACONF_ENABLE) == 0) { I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE); I915_READ(pipeconf_reg); udelay(100); } /* configure and enable CPU plane */ temp = I915_READ(dspcntr_reg); if ((temp & DISPLAY_PLANE_ENABLE) == 0) { I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE); /* Flush the plane changes */ I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); } if (!HAS_eDP) { /* enable CPU FDI TX and PCH FDI RX */ temp = I915_READ(fdi_tx_reg); temp |= FDI_TX_ENABLE; temp |= FDI_DP_PORT_WIDTH_X4; /* default */ temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; I915_WRITE(fdi_tx_reg, temp); I915_READ(fdi_tx_reg); temp = I915_READ(fdi_rx_reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE); I915_READ(fdi_rx_reg); udelay(150); /* Train FDI. */ /* umask FDI RX Interrupt symbol_lock and bit_lock bit for train result */ temp = I915_READ(fdi_rx_imr_reg); temp &= ~FDI_RX_SYMBOL_LOCK; temp &= ~FDI_RX_BIT_LOCK; I915_WRITE(fdi_rx_imr_reg, temp); I915_READ(fdi_rx_imr_reg); udelay(150); temp = I915_READ(fdi_rx_iir_reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if ((temp & FDI_RX_BIT_LOCK) == 0) { for (j = 0; j < tries; j++) { temp = I915_READ(fdi_rx_iir_reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if (temp & FDI_RX_BIT_LOCK) break; udelay(200); } if (j != tries) I915_WRITE(fdi_rx_iir_reg, temp | FDI_RX_BIT_LOCK); else DRM_DEBUG_KMS("train 1 fail\n"); } else { I915_WRITE(fdi_rx_iir_reg, temp | FDI_RX_BIT_LOCK); DRM_DEBUG_KMS("train 1 ok 2!\n"); } temp = I915_READ(fdi_tx_reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_2; I915_WRITE(fdi_tx_reg, temp); temp = I915_READ(fdi_rx_reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_2; I915_WRITE(fdi_rx_reg, temp); udelay(150); temp = I915_READ(fdi_rx_iir_reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if ((temp & FDI_RX_SYMBOL_LOCK) == 0) { for (j = 0; j < tries; j++) { temp = I915_READ(fdi_rx_iir_reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if (temp & FDI_RX_SYMBOL_LOCK) break; udelay(200); } if (j != tries) { I915_WRITE(fdi_rx_iir_reg, temp | FDI_RX_SYMBOL_LOCK); DRM_DEBUG_KMS("train 2 ok 1!\n"); } else DRM_DEBUG_KMS("train 2 fail\n"); } else { I915_WRITE(fdi_rx_iir_reg, temp | FDI_RX_SYMBOL_LOCK); DRM_DEBUG_KMS("train 2 ok 2!\n"); } DRM_DEBUG_KMS("train done\n"); /* set transcoder timing */ I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg)); I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg)); I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg)); I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg)); I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg)); I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg)); /* enable PCH transcoder */ temp = I915_READ(transconf_reg); /* * make the BPC in transcoder be consistent with * that in pipeconf reg. */ temp &= ~PIPE_BPC_MASK; temp |= pipe_bpc; I915_WRITE(transconf_reg, temp | TRANS_ENABLE); I915_READ(transconf_reg); while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0) ; /* enable normal */ temp = I915_READ(fdi_tx_reg); temp &= ~FDI_LINK_TRAIN_NONE; I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE); I915_READ(fdi_tx_reg); temp = I915_READ(fdi_rx_reg); temp &= ~FDI_LINK_TRAIN_NONE; I915_WRITE(fdi_rx_reg, temp | FDI_LINK_TRAIN_NONE | FDI_RX_ENHANCE_FRAME_ENABLE); I915_READ(fdi_rx_reg); /* wait one idle pattern time */ udelay(100); } intel_crtc_load_lut(crtc); break; case DRM_MODE_DPMS_OFF: DRM_DEBUG_KMS("crtc %d dpms off\n", pipe); drm_vblank_off(dev, pipe); /* Disable display plane */ temp = I915_READ(dspcntr_reg); if ((temp & DISPLAY_PLANE_ENABLE) != 0) { I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE); /* Flush the plane changes */ I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); I915_READ(dspbase_reg); } i915_disable_vga(dev); /* disable cpu pipe, disable after all planes disabled */ temp = I915_READ(pipeconf_reg); if ((temp & PIPEACONF_ENABLE) != 0) { I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE); I915_READ(pipeconf_reg); n = 0; /* wait for cpu pipe off, pipe state */ while ((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) != 0) { n++; if (n < 60) { udelay(500); continue; } else { DRM_DEBUG_KMS("pipe %d off delay\n", pipe); break; } } } else DRM_DEBUG_KMS("crtc %d is disabled\n", pipe); udelay(100); /* Disable PF */ temp = I915_READ(pf_ctl_reg); if ((temp & PF_ENABLE) != 0) { I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE); I915_READ(pf_ctl_reg); } I915_WRITE(pf_win_size, 0); /* disable CPU FDI tx and PCH FDI rx */ temp = I915_READ(fdi_tx_reg); I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_ENABLE); I915_READ(fdi_tx_reg); temp = I915_READ(fdi_rx_reg); /* BPC in FDI rx is consistent with that in pipeconf */ temp &= ~(0x07 << 16); temp |= (pipe_bpc << 11); I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE); I915_READ(fdi_rx_reg); udelay(100); /* still set train pattern 1 */ temp = I915_READ(fdi_tx_reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; I915_WRITE(fdi_tx_reg, temp); temp = I915_READ(fdi_rx_reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; I915_WRITE(fdi_rx_reg, temp); udelay(100); if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { temp = I915_READ(PCH_LVDS); I915_WRITE(PCH_LVDS, temp & ~LVDS_PORT_EN); I915_READ(PCH_LVDS); udelay(100); } /* disable PCH transcoder */ temp = I915_READ(transconf_reg); if ((temp & TRANS_ENABLE) != 0) { I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE); I915_READ(transconf_reg); n = 0; /* wait for PCH transcoder off, transcoder state */ while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) != 0) { n++; if (n < 60) { udelay(500); continue; } else { DRM_DEBUG_KMS("transcoder %d off " "delay\n", pipe); break; } } } temp = I915_READ(transconf_reg); /* BPC in transcoder is consistent with that in pipeconf */ temp &= ~PIPE_BPC_MASK; temp |= pipe_bpc; I915_WRITE(transconf_reg, temp); I915_READ(transconf_reg); udelay(100); /* disable PCH DPLL */ temp = I915_READ(pch_dpll_reg); if ((temp & DPLL_VCO_ENABLE) != 0) { I915_WRITE(pch_dpll_reg, temp & ~DPLL_VCO_ENABLE); I915_READ(pch_dpll_reg); } if (HAS_eDP) { ironlake_disable_pll_edp(crtc); } temp = I915_READ(fdi_rx_reg); temp &= ~FDI_SEL_PCDCLK; I915_WRITE(fdi_rx_reg, temp); I915_READ(fdi_rx_reg); temp = I915_READ(fdi_rx_reg); temp &= ~FDI_RX_PLL_ENABLE; I915_WRITE(fdi_rx_reg, temp); I915_READ(fdi_rx_reg); /* Disable CPU FDI TX PLL */ temp = I915_READ(fdi_tx_reg); if ((temp & FDI_TX_PLL_ENABLE) != 0) { I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_PLL_ENABLE); I915_READ(fdi_tx_reg); udelay(100); } /* Wait for the clocks to turn off. */ udelay(100); break; } } static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable) { struct intel_overlay *overlay; int ret; if (!enable && intel_crtc->overlay) { overlay = intel_crtc->overlay; mutex_lock(&overlay->dev->struct_mutex); for (;;) { ret = intel_overlay_switch_off(overlay); if (ret == 0) break; ret = intel_overlay_recover_from_interrupt(overlay, 0); if (ret != 0) { /* overlay doesn't react anymore. Usually * results in a black screen and an unkillable * X server. */ BUG(); overlay->hw_wedged = HW_WEDGED; break; } } mutex_unlock(&overlay->dev->struct_mutex); } /* Let userspace switch the overlay on again. In most cases userspace * has to recompute where to put it anyway. */ return; } static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR; int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; u32 temp; /* XXX: When our outputs are all unaware of DPMS modes other than off * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. */ switch (mode) { case DRM_MODE_DPMS_ON: case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: intel_update_watermarks(dev); /* Enable the DPLL */ temp = I915_READ(dpll_reg); if ((temp & DPLL_VCO_ENABLE) == 0) { I915_WRITE(dpll_reg, temp); I915_READ(dpll_reg); /* Wait for the clocks to stabilize. */ udelay(150); I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); I915_READ(dpll_reg); /* Wait for the clocks to stabilize. */ udelay(150); I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); I915_READ(dpll_reg); /* Wait for the clocks to stabilize. */ udelay(150); } /* Enable the pipe */ temp = I915_READ(pipeconf_reg); if ((temp & PIPEACONF_ENABLE) == 0) I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE); /* Enable the plane */ temp = I915_READ(dspcntr_reg); if ((temp & DISPLAY_PLANE_ENABLE) == 0) { I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE); /* Flush the plane changes */ I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); } intel_crtc_load_lut(crtc); if ((IS_I965G(dev) || plane == 0)) intel_update_fbc(crtc, &crtc->mode); /* Give the overlay scaler a chance to enable if it's on this pipe */ intel_crtc_dpms_overlay(intel_crtc, true); break; case DRM_MODE_DPMS_OFF: intel_update_watermarks(dev); /* Give the overlay scaler a chance to disable if it's on this pipe */ intel_crtc_dpms_overlay(intel_crtc, false); drm_vblank_off(dev, pipe); if (dev_priv->cfb_plane == plane && dev_priv->display.disable_fbc) dev_priv->display.disable_fbc(dev); /* Disable the VGA plane that we never use */ i915_disable_vga(dev); /* Disable display plane */ temp = I915_READ(dspcntr_reg); if ((temp & DISPLAY_PLANE_ENABLE) != 0) { I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE); /* Flush the plane changes */ I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); I915_READ(dspbase_reg); } if (!IS_I9XX(dev)) { /* Wait for vblank for the disable to take effect */ intel_wait_for_vblank(dev); } /* Next, disable display pipes */ temp = I915_READ(pipeconf_reg); if ((temp & PIPEACONF_ENABLE) != 0) { I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE); I915_READ(pipeconf_reg); } /* Wait for vblank for the disable to take effect. */ intel_wait_for_vblank(dev); temp = I915_READ(dpll_reg); if ((temp & DPLL_VCO_ENABLE) != 0) { I915_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE); I915_READ(dpll_reg); } /* Wait for the clocks to turn off. */ udelay(150); break; } } /** * Sets the power management mode of the pipe and plane. * * This code should probably grow support for turning the cursor off and back * on appropriately at the same time as we're turning the pipe off/on. */ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_master_private *master_priv; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; bool enabled; dev_priv->display.dpms(crtc, mode); intel_crtc->dpms_mode = mode; if (!dev->primary->master) return; master_priv = dev->primary->master->driver_priv; if (!master_priv->sarea_priv) return; enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF; switch (pipe) { case 0: master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0; master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0; break; case 1: master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0; master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0; break; default: DRM_ERROR("Can't update pipe %d in SAREA\n", pipe); break; } } static void intel_crtc_prepare (struct drm_crtc *crtc) { struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); } static void intel_crtc_commit (struct drm_crtc *crtc) { struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); } void intel_encoder_prepare (struct drm_encoder *encoder) { struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; /* lvds has its own version of prepare see intel_lvds_prepare */ encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); } void intel_encoder_commit (struct drm_encoder *encoder) { struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; /* lvds has its own version of commit see intel_lvds_commit */ encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); } static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { struct drm_device *dev = crtc->dev; if (HAS_PCH_SPLIT(dev)) { /* FDI link clock is fixed at 2.7G */ if (mode->clock * 3 > 27000 * 4) return MODE_CLOCK_HIGH; } return true; } static int i945_get_display_clock_speed(struct drm_device *dev) { return 400000; } static int i915_get_display_clock_speed(struct drm_device *dev) { return 333000; } static int i9xx_misc_get_display_clock_speed(struct drm_device *dev) { return 200000; } static int i915gm_get_display_clock_speed(struct drm_device *dev) { u16 gcfgc = 0; pci_read_config_word(dev->pdev, GCFGC, &gcfgc); if (gcfgc & GC_LOW_FREQUENCY_ENABLE) return 133000; else { switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { case GC_DISPLAY_CLOCK_333_MHZ: return 333000; default: case GC_DISPLAY_CLOCK_190_200_MHZ: return 190000; } } } static int i865_get_display_clock_speed(struct drm_device *dev) { return 266000; } static int i855_get_display_clock_speed(struct drm_device *dev) { u16 hpllcc = 0; /* Assume that the hardware is in the high speed state. This * should be the default. */ switch (hpllcc & GC_CLOCK_CONTROL_MASK) { case GC_CLOCK_133_200: case GC_CLOCK_100_200: return 200000; case GC_CLOCK_166_250: return 250000; case GC_CLOCK_100_133: return 133000; } /* Shouldn't happen */ return 0; } static int i830_get_display_clock_speed(struct drm_device *dev) { return 133000; } /** * Return the pipe currently connected to the panel fitter, * or -1 if the panel fitter is not present or not in use */ int intel_panel_fitter_pipe (struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 pfit_control; /* i830 doesn't have a panel fitter */ if (IS_I830(dev)) return -1; pfit_control = I915_READ(PFIT_CONTROL); /* See if the panel fitter is in use */ if ((pfit_control & PFIT_ENABLE) == 0) return -1; /* 965 can place panel fitter on either pipe */ if (IS_I965G(dev)) return (pfit_control >> 29) & 0x3; /* older chips can only use pipe 1 */ return 1; } struct fdi_m_n { u32 tu; u32 gmch_m; u32 gmch_n; u32 link_m; u32 link_n; }; static void fdi_reduce_ratio(u32 *num, u32 *den) { while (*num > 0xffffff || *den > 0xffffff) { *num >>= 1; *den >>= 1; } } #define DATA_N 0x800000 #define LINK_N 0x80000 static void ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock, int link_clock, struct fdi_m_n *m_n) { u64 temp; m_n->tu = 64; /* default size */ temp = (u64) DATA_N * pixel_clock; temp = div_u64(temp, link_clock); m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes); m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */ m_n->gmch_n = DATA_N; fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); temp = (u64) LINK_N * pixel_clock; m_n->link_m = div_u64(temp, link_clock); m_n->link_n = LINK_N; fdi_reduce_ratio(&m_n->link_m, &m_n->link_n); } struct intel_watermark_params { unsigned long fifo_size; unsigned long max_wm; unsigned long default_wm; unsigned long guard_size; unsigned long cacheline_size; }; /* Pineview has different values for various configs */ static struct intel_watermark_params pineview_display_wm = { PINEVIEW_DISPLAY_FIFO, PINEVIEW_MAX_WM, PINEVIEW_DFT_WM, PINEVIEW_GUARD_WM, PINEVIEW_FIFO_LINE_SIZE }; static struct intel_watermark_params pineview_display_hplloff_wm = { PINEVIEW_DISPLAY_FIFO, PINEVIEW_MAX_WM, PINEVIEW_DFT_HPLLOFF_WM, PINEVIEW_GUARD_WM, PINEVIEW_FIFO_LINE_SIZE }; static struct intel_watermark_params pineview_cursor_wm = { PINEVIEW_CURSOR_FIFO, PINEVIEW_CURSOR_MAX_WM, PINEVIEW_CURSOR_DFT_WM, PINEVIEW_CURSOR_GUARD_WM, PINEVIEW_FIFO_LINE_SIZE, }; static struct intel_watermark_params pineview_cursor_hplloff_wm = { PINEVIEW_CURSOR_FIFO, PINEVIEW_CURSOR_MAX_WM, PINEVIEW_CURSOR_DFT_WM, PINEVIEW_CURSOR_GUARD_WM, PINEVIEW_FIFO_LINE_SIZE }; static struct intel_watermark_params g4x_wm_info = { G4X_FIFO_SIZE, G4X_MAX_WM, G4X_MAX_WM, 2, G4X_FIFO_LINE_SIZE, }; static struct intel_watermark_params i945_wm_info = { I945_FIFO_SIZE, I915_MAX_WM, 1, 2, I915_FIFO_LINE_SIZE }; static struct intel_watermark_params i915_wm_info = { I915_FIFO_SIZE, I915_MAX_WM, 1, 2, I915_FIFO_LINE_SIZE }; static struct intel_watermark_params i855_wm_info = { I855GM_FIFO_SIZE, I915_MAX_WM, 1, 2, I830_FIFO_LINE_SIZE }; static struct intel_watermark_params i830_wm_info = { I830_FIFO_SIZE, I915_MAX_WM, 1, 2, I830_FIFO_LINE_SIZE }; /** * intel_calculate_wm - calculate watermark level * @clock_in_khz: pixel clock * @wm: chip FIFO params * @pixel_size: display pixel size * @latency_ns: memory latency for the platform * * Calculate the watermark level (the level at which the display plane will * start fetching from memory again). Each chip has a different display * FIFO size and allocation, so the caller needs to figure that out and pass * in the correct intel_watermark_params structure. * * As the pixel clock runs, the FIFO will be drained at a rate that depends * on the pixel size. When it reaches the watermark level, it'll start * fetching FIFO line sized based chunks from memory until the FIFO fills * past the watermark point. If the FIFO drains completely, a FIFO underrun * will occur, and a display engine hang could result. */ static unsigned long intel_calculate_wm(unsigned long clock_in_khz, struct intel_watermark_params *wm, int pixel_size, unsigned long latency_ns) { long entries_required, wm_size; /* * Note: we need to make sure we don't overflow for various clock & * latency values. * clocks go from a few thousand to several hundred thousand. * latency is usually a few thousand */ entries_required = ((clock_in_khz / 1000) * pixel_size * latency_ns) / 1000; entries_required /= wm->cacheline_size; DRM_DEBUG_KMS("FIFO entries required for mode: %d\n", entries_required); wm_size = wm->fifo_size - (entries_required + wm->guard_size); DRM_DEBUG_KMS("FIFO watermark level: %d\n", wm_size); /* Don't promote wm_size to unsigned... */ if (wm_size > (long)wm->max_wm) wm_size = wm->max_wm; if (wm_size <= 0) wm_size = wm->default_wm; return wm_size; } struct cxsr_latency { int is_desktop; unsigned long fsb_freq; unsigned long mem_freq; unsigned long display_sr; unsigned long display_hpll_disable; unsigned long cursor_sr; unsigned long cursor_hpll_disable; }; static struct cxsr_latency cxsr_latency_table[] = { {1, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */ {1, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */ {1, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */ {1, 667, 400, 3400, 33400, 4021, 34021}, /* DDR2-400 SC */ {1, 667, 667, 3372, 33372, 3845, 33845}, /* DDR2-667 SC */ {1, 667, 800, 3386, 33386, 3822, 33822}, /* DDR2-800 SC */ {1, 400, 400, 3472, 33472, 4173, 34173}, /* DDR2-400 SC */ {1, 400, 667, 3443, 33443, 3996, 33996}, /* DDR2-667 SC */ {1, 400, 800, 3430, 33430, 3946, 33946}, /* DDR2-800 SC */ {0, 800, 400, 3438, 33438, 4065, 34065}, /* DDR2-400 SC */ {0, 800, 667, 3410, 33410, 3889, 33889}, /* DDR2-667 SC */ {0, 800, 800, 3403, 33403, 3845, 33845}, /* DDR2-800 SC */ {0, 667, 400, 3456, 33456, 4103, 34106}, /* DDR2-400 SC */ {0, 667, 667, 3428, 33428, 3927, 33927}, /* DDR2-667 SC */ {0, 667, 800, 3443, 33443, 3905, 33905}, /* DDR2-800 SC */ {0, 400, 400, 3528, 33528, 4255, 34255}, /* DDR2-400 SC */ {0, 400, 667, 3500, 33500, 4079, 34079}, /* DDR2-667 SC */ {0, 400, 800, 3487, 33487, 4029, 34029}, /* DDR2-800 SC */ }; static struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int fsb, int mem) { int i; struct cxsr_latency *latency; if (fsb == 0 || mem == 0) return NULL; for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) { latency = &cxsr_latency_table[i]; if (is_desktop == latency->is_desktop && fsb == latency->fsb_freq && mem == latency->mem_freq) return latency; } DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n"); return NULL; } static void pineview_disable_cxsr(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 reg; /* deactivate cxsr */ reg = I915_READ(DSPFW3); reg &= ~(PINEVIEW_SELF_REFRESH_EN); I915_WRITE(DSPFW3, reg); DRM_INFO("Big FIFO is disabled\n"); } static void pineview_enable_cxsr(struct drm_device *dev, unsigned long clock, int pixel_size) { struct drm_i915_private *dev_priv = dev->dev_private; u32 reg; unsigned long wm; struct cxsr_latency *latency; latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->fsb_freq, dev_priv->mem_freq); if (!latency) { DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n"); pineview_disable_cxsr(dev); return; } /* Display SR */ wm = intel_calculate_wm(clock, &pineview_display_wm, pixel_size, latency->display_sr); reg = I915_READ(DSPFW1); reg &= 0x7fffff; reg |= wm << 23; I915_WRITE(DSPFW1, reg); DRM_DEBUG_KMS("DSPFW1 register is %x\n", reg); /* cursor SR */ wm = intel_calculate_wm(clock, &pineview_cursor_wm, pixel_size, latency->cursor_sr); reg = I915_READ(DSPFW3); reg &= ~(0x3f << 24); reg |= (wm & 0x3f) << 24; I915_WRITE(DSPFW3, reg); /* Display HPLL off SR */ wm = intel_calculate_wm(clock, &pineview_display_hplloff_wm, latency->display_hpll_disable, I915_FIFO_LINE_SIZE); reg = I915_READ(DSPFW3); reg &= 0xfffffe00; reg |= wm & 0x1ff; I915_WRITE(DSPFW3, reg); /* cursor HPLL off SR */ wm = intel_calculate_wm(clock, &pineview_cursor_hplloff_wm, pixel_size, latency->cursor_hpll_disable); reg = I915_READ(DSPFW3); reg &= ~(0x3f << 16); reg |= (wm & 0x3f) << 16; I915_WRITE(DSPFW3, reg); DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg); /* activate cxsr */ reg = I915_READ(DSPFW3); reg |= PINEVIEW_SELF_REFRESH_EN; I915_WRITE(DSPFW3, reg); DRM_INFO("Big FIFO is enabled\n"); return; } /* * Latency for FIFO fetches is dependent on several factors: * - memory configuration (speed, channels) * - chipset * - current MCH state * It can be fairly high in some situations, so here we assume a fairly * pessimal value. It's a tradeoff between extra memory fetches (if we * set this value too high, the FIFO will fetch frequently to stay full) * and power consumption (set it too low to save power and we might see * FIFO underruns and display "flicker"). * * A value of 5us seems to be a good balance; safe for very low end * platforms but not overly aggressive on lower latency configs. */ static const int latency_ns = 5000; static int i9xx_get_fifo_size(struct drm_device *dev, int plane) { struct drm_i915_private *dev_priv = dev->dev_private; uint32_t dsparb = I915_READ(DSPARB); int size; if (plane == 0) size = dsparb & 0x7f; else size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) - (dsparb & 0x7f); DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A", size); return size; } static int i85x_get_fifo_size(struct drm_device *dev, int plane) { struct drm_i915_private *dev_priv = dev->dev_private; uint32_t dsparb = I915_READ(DSPARB); int size; if (plane == 0) size = dsparb & 0x1ff; else size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) - (dsparb & 0x1ff); size >>= 1; /* Convert to cachelines */ DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A", size); return size; } static int i845_get_fifo_size(struct drm_device *dev, int plane) { struct drm_i915_private *dev_priv = dev->dev_private; uint32_t dsparb = I915_READ(DSPARB); int size; size = dsparb & 0x7f; size >>= 2; /* Convert to cachelines */ DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A", size); return size; } static int i830_get_fifo_size(struct drm_device *dev, int plane) { struct drm_i915_private *dev_priv = dev->dev_private; uint32_t dsparb = I915_READ(DSPARB); int size; size = dsparb & 0x7f; size >>= 1; /* Convert to cachelines */ DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A", size); return size; } static void g4x_update_wm(struct drm_device *dev, int planea_clock, int planeb_clock, int sr_hdisplay, int pixel_size) { struct drm_i915_private *dev_priv = dev->dev_private; int total_size, cacheline_size; int planea_wm, planeb_wm, cursora_wm, cursorb_wm, cursor_sr; struct intel_watermark_params planea_params, planeb_params; unsigned long line_time_us; int sr_clock, sr_entries = 0, entries_required; /* Create copies of the base settings for each pipe */ planea_params = planeb_params = g4x_wm_info; /* Grab a couple of global values before we overwrite them */ total_size = planea_params.fifo_size; cacheline_size = planea_params.cacheline_size; /* * Note: we need to make sure we don't overflow for various clock & * latency values. * clocks go from a few thousand to several hundred thousand. * latency is usually a few thousand */ entries_required = ((planea_clock / 1000) * pixel_size * latency_ns) / 1000; entries_required /= G4X_FIFO_LINE_SIZE; planea_wm = entries_required + planea_params.guard_size; entries_required = ((planeb_clock / 1000) * pixel_size * latency_ns) / 1000; entries_required /= G4X_FIFO_LINE_SIZE; planeb_wm = entries_required + planeb_params.guard_size; cursora_wm = cursorb_wm = 16; cursor_sr = 32; DRM_DEBUG("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm); /* Calc sr entries for one plane configs */ if (sr_hdisplay && (!planea_clock || !planeb_clock)) { /* self-refresh has much higher latency */ static const int sr_latency_ns = 12000; sr_clock = planea_clock ? planea_clock : planeb_clock; line_time_us = ((sr_hdisplay * 1000) / sr_clock); /* Use ns/us then divide to preserve precision */ sr_entries = (((sr_latency_ns / line_time_us) + 1) * pixel_size * sr_hdisplay) / 1000; sr_entries = roundup(sr_entries / cacheline_size, 1); DRM_DEBUG("self-refresh entries: %d\n", sr_entries); I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); } else { /* Turn off self refresh if both pipes are enabled */ I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN); } DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n", planea_wm, planeb_wm, sr_entries); planea_wm &= 0x3f; planeb_wm &= 0x3f; I915_WRITE(DSPFW1, (sr_entries << DSPFW_SR_SHIFT) | (cursorb_wm << DSPFW_CURSORB_SHIFT) | (planeb_wm << DSPFW_PLANEB_SHIFT) | planea_wm); I915_WRITE(DSPFW2, (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) | (cursora_wm << DSPFW_CURSORA_SHIFT)); /* HPLL off in SR has some issues on G4x... disable it */ I915_WRITE(DSPFW3, (I915_READ(DSPFW3) & ~DSPFW_HPLL_SR_EN) | (cursor_sr << DSPFW_CURSOR_SR_SHIFT)); } static void i965_update_wm(struct drm_device *dev, int planea_clock, int planeb_clock, int sr_hdisplay, int pixel_size) { struct drm_i915_private *dev_priv = dev->dev_private; unsigned long line_time_us; int sr_clock, sr_entries, srwm = 1; /* Calc sr entries for one plane configs */ if (sr_hdisplay && (!planea_clock || !planeb_clock)) { /* self-refresh has much higher latency */ static const int sr_latency_ns = 12000; sr_clock = planea_clock ? planea_clock : planeb_clock; line_time_us = ((sr_hdisplay * 1000) / sr_clock); /* Use ns/us then divide to preserve precision */ sr_entries = (((sr_latency_ns / line_time_us) + 1) * pixel_size * sr_hdisplay) / 1000; sr_entries = roundup(sr_entries / I915_FIFO_LINE_SIZE, 1); DRM_DEBUG("self-refresh entries: %d\n", sr_entries); srwm = I945_FIFO_SIZE - sr_entries; if (srwm < 0) srwm = 1; srwm &= 0x3f; I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); } else { /* Turn off self refresh if both pipes are enabled */ I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN); } DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n", srwm); /* 965 has limitations... */ I915_WRITE(DSPFW1, (srwm << DSPFW_SR_SHIFT) | (8 << 16) | (8 << 8) | (8 << 0)); I915_WRITE(DSPFW2, (8 << 8) | (8 << 0)); } static void i9xx_update_wm(struct drm_device *dev, int planea_clock, int planeb_clock, int sr_hdisplay, int pixel_size) { struct drm_i915_private *dev_priv = dev->dev_private; uint32_t fwater_lo; uint32_t fwater_hi; int total_size, cacheline_size, cwm, srwm = 1; int planea_wm, planeb_wm; struct intel_watermark_params planea_params, planeb_params; unsigned long line_time_us; int sr_clock, sr_entries = 0; /* Create copies of the base settings for each pipe */ if (IS_I965GM(dev) || IS_I945GM(dev)) planea_params = planeb_params = i945_wm_info; else if (IS_I9XX(dev)) planea_params = planeb_params = i915_wm_info; else planea_params = planeb_params = i855_wm_info; /* Grab a couple of global values before we overwrite them */ total_size = planea_params.fifo_size; cacheline_size = planea_params.cacheline_size; /* Update per-plane FIFO sizes */ planea_params.fifo_size = dev_priv->display.get_fifo_size(dev, 0); planeb_params.fifo_size = dev_priv->display.get_fifo_size(dev, 1); planea_wm = intel_calculate_wm(planea_clock, &planea_params, pixel_size, latency_ns); planeb_wm = intel_calculate_wm(planeb_clock, &planeb_params, pixel_size, latency_ns); DRM_DEBUG_KMS("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm); /* * Overlay gets an aggressive default since video jitter is bad. */ cwm = 2; /* Calc sr entries for one plane configs */ if (HAS_FW_BLC(dev) && sr_hdisplay && (!planea_clock || !planeb_clock)) { /* self-refresh has much higher latency */ static const int sr_latency_ns = 6000; sr_clock = planea_clock ? planea_clock : planeb_clock; line_time_us = ((sr_hdisplay * 1000) / sr_clock); /* Use ns/us then divide to preserve precision */ sr_entries = (((sr_latency_ns / line_time_us) + 1) * pixel_size * sr_hdisplay) / 1000; sr_entries = roundup(sr_entries / cacheline_size, 1); DRM_DEBUG_KMS("self-refresh entries: %d\n", sr_entries); srwm = total_size - sr_entries; if (srwm < 0) srwm = 1; if (IS_I945G(dev) || IS_I945GM(dev)) I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_FIFO_MASK | (srwm & 0xff)); else if (IS_I915GM(dev)) { /* 915M has a smaller SRWM field */ I915_WRITE(FW_BLC_SELF, srwm & 0x3f); I915_WRITE(INSTPM, I915_READ(INSTPM) | INSTPM_SELF_EN); } } else { /* Turn off self refresh if both pipes are enabled */ if (IS_I945G(dev) || IS_I945GM(dev)) { I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN); } else if (IS_I915GM(dev)) { I915_WRITE(INSTPM, I915_READ(INSTPM) & ~INSTPM_SELF_EN); } } DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n", planea_wm, planeb_wm, cwm, srwm); fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f); fwater_hi = (cwm & 0x1f); /* Set request length to 8 cachelines per fetch */ fwater_lo = fwater_lo | (1 << 24) | (1 << 8); fwater_hi = fwater_hi | (1 << 8); I915_WRITE(FW_BLC, fwater_lo); I915_WRITE(FW_BLC2, fwater_hi); } static void i830_update_wm(struct drm_device *dev, int planea_clock, int unused, int unused2, int pixel_size) { struct drm_i915_private *dev_priv = dev->dev_private; uint32_t fwater_lo = I915_READ(FW_BLC) & ~0xfff; int planea_wm; i830_wm_info.fifo_size = dev_priv->display.get_fifo_size(dev, 0); planea_wm = intel_calculate_wm(planea_clock, &i830_wm_info, pixel_size, latency_ns); fwater_lo |= (3<<8) | planea_wm; DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d\n", planea_wm); I915_WRITE(FW_BLC, fwater_lo); } /** * intel_update_watermarks - update FIFO watermark values based on current modes * * Calculate watermark values for the various WM regs based on current mode * and plane configuration. * * There are several cases to deal with here: * - normal (i.e. non-self-refresh) * - self-refresh (SR) mode * - lines are large relative to FIFO size (buffer can hold up to 2) * - lines are small relative to FIFO size (buffer can hold more than 2 * lines), so need to account for TLB latency * * The normal calculation is: * watermark = dotclock * bytes per pixel * latency * where latency is platform & configuration dependent (we assume pessimal * values here). * * The SR calculation is: * watermark = (trunc(latency/line time)+1) * surface width * * bytes per pixel * where * line time = htotal / dotclock * and latency is assumed to be high, as above. * * The final value programmed to the register should always be rounded up, * and include an extra 2 entries to account for clock crossings. * * We don't use the sprite, so we can ignore that. And on Crestline we have * to set the non-SR watermarks to 8. */ static void intel_update_watermarks(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_crtc *crtc; struct intel_crtc *intel_crtc; int sr_hdisplay = 0; unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0; int enabled = 0, pixel_size = 0; if (!dev_priv->display.update_wm) return; /* Get the clock config from both planes */ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { intel_crtc = to_intel_crtc(crtc); if (crtc->enabled) { enabled++; if (intel_crtc->plane == 0) { DRM_DEBUG_KMS("plane A (pipe %d) clock: %d\n", intel_crtc->pipe, crtc->mode.clock); planea_clock = crtc->mode.clock; } else { DRM_DEBUG_KMS("plane B (pipe %d) clock: %d\n", intel_crtc->pipe, crtc->mode.clock); planeb_clock = crtc->mode.clock; } sr_hdisplay = crtc->mode.hdisplay; sr_clock = crtc->mode.clock; if (crtc->fb) pixel_size = crtc->fb->bits_per_pixel / 8; else pixel_size = 4; /* by default */ } } if (enabled <= 0) return; /* Single plane configs can enable self refresh */ if (enabled == 1 && IS_PINEVIEW(dev)) pineview_enable_cxsr(dev, sr_clock, pixel_size); else if (IS_PINEVIEW(dev)) pineview_disable_cxsr(dev); dev_priv->display.update_wm(dev, planea_clock, planeb_clock, sr_hdisplay, pixel_size); } static int intel_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, int x, int y, struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; int fp_reg = (pipe == 0) ? FPA0 : FPB0; int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD; int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; int dspsize_reg = (plane == 0) ? DSPASIZE : DSPBSIZE; int dsppos_reg = (plane == 0) ? DSPAPOS : DSPBPOS; int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; int refclk, num_outputs = 0; intel_clock_t clock, reduced_clock; u32 dpll = 0, fp = 0, fp2 = 0, dspcntr, pipeconf; bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false; bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; bool is_edp = false; struct drm_mode_config *mode_config = &dev->mode_config; struct drm_connector *connector; const intel_limit_t *limit; int ret; struct fdi_m_n m_n = {0}; int data_m1_reg = (pipe == 0) ? PIPEA_DATA_M1 : PIPEB_DATA_M1; int data_n1_reg = (pipe == 0) ? PIPEA_DATA_N1 : PIPEB_DATA_N1; int link_m1_reg = (pipe == 0) ? PIPEA_LINK_M1 : PIPEB_LINK_M1; int link_n1_reg = (pipe == 0) ? PIPEA_LINK_N1 : PIPEB_LINK_N1; int pch_fp_reg = (pipe == 0) ? PCH_FPA0 : PCH_FPB0; int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B; int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL; int lvds_reg = LVDS; u32 temp; int sdvo_pixel_multiply; int target_clock; drm_vblank_pre_modeset(dev, pipe); list_for_each_entry(connector, &mode_config->connector_list, head) { struct intel_output *intel_output = to_intel_output(connector); if (!connector->encoder || connector->encoder->crtc != crtc) continue; switch (intel_output->type) { case INTEL_OUTPUT_LVDS: is_lvds = true; break; case INTEL_OUTPUT_SDVO: case INTEL_OUTPUT_HDMI: is_sdvo = true; if (intel_output->needs_tv_clock) is_tv = true; break; case INTEL_OUTPUT_DVO: is_dvo = true; break; case INTEL_OUTPUT_TVOUT: is_tv = true; break; case INTEL_OUTPUT_ANALOG: is_crt = true; break; case INTEL_OUTPUT_DISPLAYPORT: is_dp = true; break; case INTEL_OUTPUT_EDP: is_edp = true; break; } num_outputs++; } if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2) { refclk = dev_priv->lvds_ssc_freq * 1000; DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n", refclk / 1000); } else if (IS_I9XX(dev)) { refclk = 96000; if (HAS_PCH_SPLIT(dev)) refclk = 120000; /* 120Mhz refclk */ } else { refclk = 48000; } /* * Returns a set of divisors for the desired target clock with the given * refclk, or FALSE. The returned values represent the clock equation: * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. */ limit = intel_limit(crtc); ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock); if (!ok) { DRM_ERROR("Couldn't find PLL settings for mode!\n"); drm_vblank_post_modeset(dev, pipe); return -EINVAL; } if (is_lvds && dev_priv->lvds_downclock_avail) { has_reduced_clock = limit->find_pll(limit, crtc, dev_priv->lvds_downclock, refclk, &reduced_clock); if (has_reduced_clock && (clock.p != reduced_clock.p)) { /* * If the different P is found, it means that we can't * switch the display clock by using the FP0/FP1. * In such case we will disable the LVDS downclock * feature. */ DRM_DEBUG_KMS("Different P is found for " "LVDS clock/downclock\n"); has_reduced_clock = 0; } } /* SDVO TV has fixed PLL values depend on its clock range, this mirrors vbios setting. */ if (is_sdvo && is_tv) { if (adjusted_mode->clock >= 100000 && adjusted_mode->clock < 140500) { clock.p1 = 2; clock.p2 = 10; clock.n = 3; clock.m1 = 16; clock.m2 = 8; } else if (adjusted_mode->clock >= 140500 && adjusted_mode->clock <= 200000) { clock.p1 = 1; clock.p2 = 10; clock.n = 6; clock.m1 = 12; clock.m2 = 8; } } /* FDI link */ if (HAS_PCH_SPLIT(dev)) { int lane, link_bw, bpp; /* eDP doesn't require FDI link, so just set DP M/N according to current link config */ if (is_edp) { struct drm_connector *edp; target_clock = mode->clock; edp = intel_pipe_get_output(crtc); intel_edp_link_config(to_intel_output(edp), &lane, &link_bw); } else { /* DP over FDI requires target mode clock instead of link clock */ if (is_dp) target_clock = mode->clock; else target_clock = adjusted_mode->clock; lane = 4; link_bw = 270000; } /* determine panel color depth */ temp = I915_READ(pipeconf_reg); temp &= ~PIPE_BPC_MASK; if (is_lvds) { int lvds_reg = I915_READ(PCH_LVDS); /* the BPC will be 6 if it is 18-bit LVDS panel */ if ((lvds_reg & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP) temp |= PIPE_8BPC; else temp |= PIPE_6BPC; } else if (is_edp) { switch (dev_priv->edp_bpp/3) { case 8: temp |= PIPE_8BPC; break; case 10: temp |= PIPE_10BPC; break; case 6: temp |= PIPE_6BPC; break; case 12: temp |= PIPE_12BPC; break; } } else temp |= PIPE_8BPC; I915_WRITE(pipeconf_reg, temp); I915_READ(pipeconf_reg); switch (temp & PIPE_BPC_MASK) { case PIPE_8BPC: bpp = 24; break; case PIPE_10BPC: bpp = 30; break; case PIPE_6BPC: bpp = 18; break; case PIPE_12BPC: bpp = 36; break; default: DRM_ERROR("unknown pipe bpc value\n"); bpp = 24; } ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n); } /* Ironlake: try to setup display ref clock before DPLL * enabling. This is only under driver's control after * PCH B stepping, previous chipset stepping should be * ignoring this setting. */ if (HAS_PCH_SPLIT(dev)) { temp = I915_READ(PCH_DREF_CONTROL); /* Always enable nonspread source */ temp &= ~DREF_NONSPREAD_SOURCE_MASK; temp |= DREF_NONSPREAD_SOURCE_ENABLE; I915_WRITE(PCH_DREF_CONTROL, temp); POSTING_READ(PCH_DREF_CONTROL); temp &= ~DREF_SSC_SOURCE_MASK; temp |= DREF_SSC_SOURCE_ENABLE; I915_WRITE(PCH_DREF_CONTROL, temp); POSTING_READ(PCH_DREF_CONTROL); udelay(200); if (is_edp) { if (dev_priv->lvds_use_ssc) { temp |= DREF_SSC1_ENABLE; I915_WRITE(PCH_DREF_CONTROL, temp); POSTING_READ(PCH_DREF_CONTROL); udelay(200); temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK; temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; I915_WRITE(PCH_DREF_CONTROL, temp); POSTING_READ(PCH_DREF_CONTROL); } else { temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; I915_WRITE(PCH_DREF_CONTROL, temp); POSTING_READ(PCH_DREF_CONTROL); } } } if (IS_PINEVIEW(dev)) { fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2; if (has_reduced_clock) fp2 = (1 << reduced_clock.n) << 16 | reduced_clock.m1 << 8 | reduced_clock.m2; } else { fp = clock.n << 16 | clock.m1 << 8 | clock.m2; if (has_reduced_clock) fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 | reduced_clock.m2; } if (!HAS_PCH_SPLIT(dev)) dpll = DPLL_VGA_MODE_DIS; if (IS_I9XX(dev)) { if (is_lvds) dpll |= DPLLB_MODE_LVDS; else dpll |= DPLLB_MODE_DAC_SERIAL; if (is_sdvo) { dpll |= DPLL_DVO_HIGH_SPEED; sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; else if (HAS_PCH_SPLIT(dev)) dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; } if (is_dp) dpll |= DPLL_DVO_HIGH_SPEED; /* compute bitmask from p1 value */ if (IS_PINEVIEW(dev)) dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW; else { dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; /* also FPA1 */ if (HAS_PCH_SPLIT(dev)) dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; if (IS_G4X(dev) && has_reduced_clock) dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; } switch (clock.p2) { case 5: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; break; case 7: dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; break; case 10: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; break; case 14: dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; break; } if (IS_I965G(dev) && !HAS_PCH_SPLIT(dev)) dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); } else { if (is_lvds) { dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; } else { if (clock.p1 == 2) dpll |= PLL_P1_DIVIDE_BY_TWO; else dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT; if (clock.p2 == 4) dpll |= PLL_P2_DIVIDE_BY_4; } } if (is_sdvo && is_tv) dpll |= PLL_REF_INPUT_TVCLKINBC; else if (is_tv) /* XXX: just matching BIOS for now */ /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ dpll |= 3; else if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2) dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; else dpll |= PLL_REF_INPUT_DREFCLK; /* setup pipeconf */ pipeconf = I915_READ(pipeconf_reg); /* Set up the display plane register */ dspcntr = DISPPLANE_GAMMA_ENABLE; /* Ironlake's plane is forced to pipe, bit 24 is to enable color space conversion */ if (!HAS_PCH_SPLIT(dev)) { if (pipe == 0) dspcntr &= ~DISPPLANE_SEL_PIPE_MASK; else dspcntr |= DISPPLANE_SEL_PIPE_B; } if (pipe == 0 && !IS_I965G(dev)) { /* Enable pixel doubling when the dot clock is > 90% of the (display) * core speed. * * XXX: No double-wide on 915GM pipe B. Is that the only reason for the * pipe == 0 check? */ if (mode->clock > dev_priv->display.get_display_clock_speed(dev) * 9 / 10) pipeconf |= PIPEACONF_DOUBLE_WIDE; else pipeconf &= ~PIPEACONF_DOUBLE_WIDE; } dspcntr |= DISPLAY_PLANE_ENABLE; pipeconf |= PIPEACONF_ENABLE; dpll |= DPLL_VCO_ENABLE; /* Disable the panel fitter if it was on our pipe */ if (!HAS_PCH_SPLIT(dev) && intel_panel_fitter_pipe(dev) == pipe) I915_WRITE(PFIT_CONTROL, 0); DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); drm_mode_debug_printmodeline(mode); /* assign to Ironlake registers */ if (HAS_PCH_SPLIT(dev)) { fp_reg = pch_fp_reg; dpll_reg = pch_dpll_reg; } if (is_edp) { ironlake_disable_pll_edp(crtc); } else if ((dpll & DPLL_VCO_ENABLE)) { I915_WRITE(fp_reg, fp); I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE); I915_READ(dpll_reg); udelay(150); } /* The LVDS pin pair needs to be on before the DPLLs are enabled. * This is an exception to the general rule that mode_set doesn't turn * things on. */ if (is_lvds) { u32 lvds; if (HAS_PCH_SPLIT(dev)) lvds_reg = PCH_LVDS; lvds = I915_READ(lvds_reg); lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT; /* set the corresponsding LVDS_BORDER bit */ lvds |= dev_priv->lvds_border_bits; /* Set the B0-B3 data pairs corresponding to whether we're going to * set the DPLLs for dual-channel mode or not. */ if (clock.p2 == 7) lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; else lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) * appropriately here, but we need to look more thoroughly into how * panels behave in the two modes. */ /* set the dithering flag */ if (IS_I965G(dev)) { if (dev_priv->lvds_dither) { if (IS_IRONLAKE(dev)) pipeconf |= PIPE_ENABLE_DITHER; else lvds |= LVDS_ENABLE_DITHER; } else { if (IS_IRONLAKE(dev)) pipeconf &= ~PIPE_ENABLE_DITHER; else lvds &= ~LVDS_ENABLE_DITHER; } } I915_WRITE(lvds_reg, lvds); I915_READ(lvds_reg); } if (is_dp) intel_dp_set_m_n(crtc, mode, adjusted_mode); if (!is_edp) { I915_WRITE(fp_reg, fp); I915_WRITE(dpll_reg, dpll); I915_READ(dpll_reg); /* Wait for the clocks to stabilize. */ udelay(150); if (IS_I965G(dev) && !HAS_PCH_SPLIT(dev)) { if (is_sdvo) { sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT)); } else I915_WRITE(dpll_md_reg, 0); } else { /* write it again -- the BIOS does, after all */ I915_WRITE(dpll_reg, dpll); } I915_READ(dpll_reg); /* Wait for the clocks to stabilize. */ udelay(150); } if (is_lvds && has_reduced_clock && i915_powersave) { I915_WRITE(fp_reg + 4, fp2); intel_crtc->lowfreq_avail = true; if (HAS_PIPE_CXSR(dev)) { DRM_DEBUG_KMS("enabling CxSR downclocking\n"); pipeconf |= PIPECONF_CXSR_DOWNCLOCK; } } else { I915_WRITE(fp_reg + 4, fp); intel_crtc->lowfreq_avail = false; if (HAS_PIPE_CXSR(dev)) { DRM_DEBUG_KMS("disabling CxSR downclocking\n"); pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK; } } I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16)); I915_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16)); I915_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16)); I915_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16)); I915_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16)); I915_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); /* pipesrc and dspsize control the size that is scaled from, which should * always be the user's requested size. */ if (!HAS_PCH_SPLIT(dev)) { I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); I915_WRITE(dsppos_reg, 0); } I915_WRITE(pipesrc_reg, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); if (HAS_PCH_SPLIT(dev)) { I915_WRITE(data_m1_reg, TU_SIZE(m_n.tu) | m_n.gmch_m); I915_WRITE(data_n1_reg, TU_SIZE(m_n.tu) | m_n.gmch_n); I915_WRITE(link_m1_reg, m_n.link_m); I915_WRITE(link_n1_reg, m_n.link_n); if (is_edp) { ironlake_set_pll_edp(crtc, adjusted_mode->clock); } else { /* enable FDI RX PLL too */ temp = I915_READ(fdi_rx_reg); I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE); udelay(200); } } I915_WRITE(pipeconf_reg, pipeconf); I915_READ(pipeconf_reg); intel_wait_for_vblank(dev); if (IS_IRONLAKE(dev)) { /* enable address swizzle for tiling buffer */ temp = I915_READ(DISP_ARB_CTL); I915_WRITE(DISP_ARB_CTL, temp | DISP_TILE_SURFACE_SWIZZLING); } I915_WRITE(dspcntr_reg, dspcntr); /* Flush the plane changes */ ret = intel_pipe_set_base(crtc, x, y, old_fb); if ((IS_I965G(dev) || plane == 0)) intel_update_fbc(crtc, &crtc->mode); intel_update_watermarks(dev); drm_vblank_post_modeset(dev, pipe); return ret; } /** Loads the palette/gamma unit for the CRTC with the prepared values */ void intel_crtc_load_lut(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int palreg = (intel_crtc->pipe == 0) ? PALETTE_A : PALETTE_B; int i; /* The clocks have to be on to load the palette. */ if (!crtc->enabled) return; /* use legacy palette for Ironlake */ if (HAS_PCH_SPLIT(dev)) palreg = (intel_crtc->pipe == 0) ? LGC_PALETTE_A : LGC_PALETTE_B; for (i = 0; i < 256; i++) { I915_WRITE(palreg + 4 * i, (intel_crtc->lut_r[i] << 16) | (intel_crtc->lut_g[i] << 8) | intel_crtc->lut_b[i]); } } static int intel_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv, uint32_t handle, uint32_t width, uint32_t height) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct drm_gem_object *bo; struct drm_i915_gem_object *obj_priv; int pipe = intel_crtc->pipe; uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR; uint32_t base = (pipe == 0) ? CURABASE : CURBBASE; uint32_t temp = I915_READ(control); size_t addr; int ret; DRM_DEBUG_KMS("\n"); /* if we want to turn off the cursor ignore width and height */ if (!handle) { DRM_DEBUG_KMS("cursor off\n"); if (IS_MOBILE(dev) || IS_I9XX(dev)) { temp &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE); temp |= CURSOR_MODE_DISABLE; } else { temp &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE); } addr = 0; bo = NULL; mutex_lock(&dev->struct_mutex); goto finish; } /* Currently we only support 64x64 cursors */ if (width != 64 || height != 64) { DRM_ERROR("we currently only support 64x64 cursors\n"); return -EINVAL; } bo = drm_gem_object_lookup(dev, file_priv, handle); if (!bo) return -ENOENT; obj_priv = bo->driver_private; if (bo->size < width * height * 4) { DRM_ERROR("buffer is to small\n"); ret = -ENOMEM; goto fail; } /* we only need to pin inside GTT if cursor is non-phy */ mutex_lock(&dev->struct_mutex); if (!dev_priv->info->cursor_needs_physical) { ret = i915_gem_object_pin(bo, PAGE_SIZE); if (ret) { DRM_ERROR("failed to pin cursor bo\n"); goto fail_locked; } addr = obj_priv->gtt_offset; } else { ret = i915_gem_attach_phys_object(dev, bo, (pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1); if (ret) { DRM_ERROR("failed to attach phys object\n"); goto fail_locked; } addr = obj_priv->phys_obj->handle->busaddr; } if (!IS_I9XX(dev)) I915_WRITE(CURSIZE, (height << 12) | width); /* Hooray for CUR*CNTR differences */ if (IS_MOBILE(dev) || IS_I9XX(dev)) { temp &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT); temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; temp |= (pipe << 28); /* Connect to correct pipe */ } else { temp &= ~(CURSOR_FORMAT_MASK); temp |= CURSOR_ENABLE; temp |= CURSOR_FORMAT_ARGB | CURSOR_GAMMA_ENABLE; } finish: I915_WRITE(control, temp); I915_WRITE(base, addr); if (intel_crtc->cursor_bo) { if (dev_priv->info->cursor_needs_physical) { if (intel_crtc->cursor_bo != bo) i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo); } else i915_gem_object_unpin(intel_crtc->cursor_bo); drm_gem_object_unreference(intel_crtc->cursor_bo); } mutex_unlock(&dev->struct_mutex); intel_crtc->cursor_addr = addr; intel_crtc->cursor_bo = bo; return 0; fail_locked: mutex_unlock(&dev->struct_mutex); fail: drm_gem_object_unreference_unlocked(bo); return ret; } static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_framebuffer *intel_fb; int pipe = intel_crtc->pipe; uint32_t temp = 0; uint32_t adder; if (crtc->fb) { intel_fb = to_intel_framebuffer(crtc->fb); intel_mark_busy(dev, intel_fb->obj); } if (x < 0) { temp |= CURSOR_POS_SIGN << CURSOR_X_SHIFT; x = -x; } if (y < 0) { temp |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT; y = -y; } temp |= x << CURSOR_X_SHIFT; temp |= y << CURSOR_Y_SHIFT; adder = intel_crtc->cursor_addr; I915_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp); I915_WRITE((pipe == 0) ? CURABASE : CURBBASE, adder); return 0; } /** Sets the color ramps on behalf of RandR */ void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green, u16 blue, int regno) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); intel_crtc->lut_r[regno] = red >> 8; intel_crtc->lut_g[regno] = green >> 8; intel_crtc->lut_b[regno] = blue >> 8; } void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue, int regno) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); *red = intel_crtc->lut_r[regno] << 8; *green = intel_crtc->lut_g[regno] << 8; *blue = intel_crtc->lut_b[regno] << 8; } static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue, uint32_t size) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int i; if (size != 256) return; for (i = 0; i < 256; i++) { intel_crtc->lut_r[i] = red[i] >> 8; intel_crtc->lut_g[i] = green[i] >> 8; intel_crtc->lut_b[i] = blue[i] >> 8; } intel_crtc_load_lut(crtc); } /** * Get a pipe with a simple mode set on it for doing load-based monitor * detection. * * It will be up to the load-detect code to adjust the pipe as appropriate for * its requirements. The pipe will be connected to no other outputs. * * Currently this code will only succeed if there is a pipe with no outputs * configured for it. In the future, it could choose to temporarily disable * some outputs to free up a pipe for its use. * * \return crtc, or NULL if no pipes are available. */ /* VESA 640x480x72Hz mode to set on the pipe */ static struct drm_display_mode load_detect_mode = { DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664, 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), }; struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output, struct drm_display_mode *mode, int *dpms_mode) { struct intel_crtc *intel_crtc; struct drm_crtc *possible_crtc; struct drm_crtc *supported_crtc =NULL; struct drm_encoder *encoder = &intel_output->enc; struct drm_crtc *crtc = NULL; struct drm_device *dev = encoder->dev; struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; struct drm_crtc_helper_funcs *crtc_funcs; int i = -1; /* * Algorithm gets a little messy: * - if the connector already has an assigned crtc, use it (but make * sure it's on first) * - try to find the first unused crtc that can drive this connector, * and use that if we find one * - if there are no unused crtcs available, try to use the first * one we found that supports the connector */ /* See if we already have a CRTC for this connector */ if (encoder->crtc) { crtc = encoder->crtc; /* Make sure the crtc and connector are running */ intel_crtc = to_intel_crtc(crtc); *dpms_mode = intel_crtc->dpms_mode; if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) { crtc_funcs = crtc->helper_private; crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); } return crtc; } /* Find an unused one (if possible) */ list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) { i++; if (!(encoder->possible_crtcs & (1 << i))) continue; if (!possible_crtc->enabled) { crtc = possible_crtc; break; } if (!supported_crtc) supported_crtc = possible_crtc; } /* * If we didn't find an unused CRTC, don't use any. */ if (!crtc) { return NULL; } encoder->crtc = crtc; intel_output->base.encoder = encoder; intel_output->load_detect_temp = true; intel_crtc = to_intel_crtc(crtc); *dpms_mode = intel_crtc->dpms_mode; if (!crtc->enabled) { if (!mode) mode = &load_detect_mode; drm_crtc_helper_set_mode(crtc, mode, 0, 0, crtc->fb); } else { if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) { crtc_funcs = crtc->helper_private; crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); } /* Add this connector to the crtc */ encoder_funcs->mode_set(encoder, &crtc->mode, &crtc->mode); encoder_funcs->commit(encoder); } /* let the connector get through one full cycle before testing */ intel_wait_for_vblank(dev); return crtc; } void intel_release_load_detect_pipe(struct intel_output *intel_output, int dpms_mode) { struct drm_encoder *encoder = &intel_output->enc; struct drm_device *dev = encoder->dev; struct drm_crtc *crtc = encoder->crtc; struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; if (intel_output->load_detect_temp) { encoder->crtc = NULL; intel_output->base.encoder = NULL; intel_output->load_detect_temp = false; crtc->enabled = drm_helper_crtc_in_use(crtc); drm_helper_disable_unused_functions(dev); } /* Switch crtc and output back off if necessary */ if (crtc->enabled && dpms_mode != DRM_MODE_DPMS_ON) { if (encoder->crtc == crtc) encoder_funcs->dpms(encoder, dpms_mode); crtc_funcs->dpms(crtc, dpms_mode); } } /* Returns the clock of the currently programmed mode of the given pipe. */ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; u32 dpll = I915_READ((pipe == 0) ? DPLL_A : DPLL_B); u32 fp; intel_clock_t clock; if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) fp = I915_READ((pipe == 0) ? FPA0 : FPB0); else fp = I915_READ((pipe == 0) ? FPA1 : FPB1); clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT; if (IS_PINEVIEW(dev)) { clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1; clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT; } else { clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT; clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT; } if (IS_I9XX(dev)) { if (IS_PINEVIEW(dev)) clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >> DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW); else clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >> DPLL_FPA01_P1_POST_DIV_SHIFT); switch (dpll & DPLL_MODE_MASK) { case DPLLB_MODE_DAC_SERIAL: clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ? 5 : 10; break; case DPLLB_MODE_LVDS: clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ? 7 : 14; break; default: DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed " "mode\n", (int)(dpll & DPLL_MODE_MASK)); return 0; } /* XXX: Handle the 100Mhz refclk */ intel_clock(dev, 96000, &clock); } else { bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN); if (is_lvds) { clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >> DPLL_FPA01_P1_POST_DIV_SHIFT); clock.p2 = 14; if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN) { /* XXX: might not be 66MHz */ intel_clock(dev, 66000, &clock); } else intel_clock(dev, 48000, &clock); } else { if (dpll & PLL_P1_DIVIDE_BY_TWO) clock.p1 = 2; else { clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >> DPLL_FPA01_P1_POST_DIV_SHIFT) + 2; } if (dpll & PLL_P2_DIVIDE_BY_4) clock.p2 = 4; else clock.p2 = 2; intel_clock(dev, 48000, &clock); } } /* XXX: It would be nice to validate the clocks, but we can't reuse * i830PllIsValid() because it relies on the xf86_config connector * configuration being accurate, which it isn't necessarily. */ return clock.dot; } /** Returns the currently programmed mode of the given pipe. */ struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev, struct drm_crtc *crtc) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; struct drm_display_mode *mode; int htot = I915_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B); int hsync = I915_READ((pipe == 0) ? HSYNC_A : HSYNC_B); int vtot = I915_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B); int vsync = I915_READ((pipe == 0) ? VSYNC_A : VSYNC_B); mode = kzalloc(sizeof(*mode), GFP_KERNEL); if (!mode) return NULL; mode->clock = intel_crtc_clock_get(dev, crtc); mode->hdisplay = (htot & 0xffff) + 1; mode->htotal = ((htot & 0xffff0000) >> 16) + 1; mode->hsync_start = (hsync & 0xffff) + 1; mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1; mode->vdisplay = (vtot & 0xffff) + 1; mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1; mode->vsync_start = (vsync & 0xffff) + 1; mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1; drm_mode_set_name(mode); drm_mode_set_crtcinfo(mode, 0); return mode; } #define GPU_IDLE_TIMEOUT 500 /* ms */ /* When this timer fires, we've been idle for awhile */ static void intel_gpu_idle_timer(unsigned long arg) { struct drm_device *dev = (struct drm_device *)arg; drm_i915_private_t *dev_priv = dev->dev_private; DRM_DEBUG_DRIVER("idle timer fired, downclocking\n"); dev_priv->busy = false; queue_work(dev_priv->wq, &dev_priv->idle_work); } #define CRTC_IDLE_TIMEOUT 1000 /* ms */ static void intel_crtc_idle_timer(unsigned long arg) { struct intel_crtc *intel_crtc = (struct intel_crtc *)arg; struct drm_crtc *crtc = &intel_crtc->base; drm_i915_private_t *dev_priv = crtc->dev->dev_private; DRM_DEBUG_DRIVER("idle timer fired, downclocking\n"); intel_crtc->busy = false; queue_work(dev_priv->wq, &dev_priv->idle_work); } static void intel_increase_pllclock(struct drm_crtc *crtc, bool schedule) { struct drm_device *dev = crtc->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; int dpll = I915_READ(dpll_reg); if (HAS_PCH_SPLIT(dev)) return; if (!dev_priv->lvds_downclock_avail) return; if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) { DRM_DEBUG_DRIVER("upclocking LVDS\n"); /* Unlock panel regs */ I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | (0xabcd << 16)); dpll &= ~DISPLAY_RATE_SELECT_FPA1; I915_WRITE(dpll_reg, dpll); dpll = I915_READ(dpll_reg); intel_wait_for_vblank(dev); dpll = I915_READ(dpll_reg); if (dpll & DISPLAY_RATE_SELECT_FPA1) DRM_DEBUG_DRIVER("failed to upclock LVDS!\n"); /* ...and lock them again */ I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) & 0x3); } /* Schedule downclock */ if (schedule) mod_timer(&intel_crtc->idle_timer, jiffies + msecs_to_jiffies(CRTC_IDLE_TIMEOUT)); } static void intel_decrease_pllclock(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; int dpll = I915_READ(dpll_reg); if (HAS_PCH_SPLIT(dev)) return; if (!dev_priv->lvds_downclock_avail) return; /* * Since this is called by a timer, we should never get here in * the manual case. */ if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) { DRM_DEBUG_DRIVER("downclocking LVDS\n"); /* Unlock panel regs */ I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | (0xabcd << 16)); dpll |= DISPLAY_RATE_SELECT_FPA1; I915_WRITE(dpll_reg, dpll); dpll = I915_READ(dpll_reg); intel_wait_for_vblank(dev); dpll = I915_READ(dpll_reg); if (!(dpll & DISPLAY_RATE_SELECT_FPA1)) DRM_DEBUG_DRIVER("failed to downclock LVDS!\n"); /* ...and lock them again */ I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) & 0x3); } } /** * intel_idle_update - adjust clocks for idleness * @work: work struct * * Either the GPU or display (or both) went idle. Check the busy status * here and adjust the CRTC and GPU clocks as necessary. */ static void intel_idle_update(struct work_struct *work) { drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, idle_work); struct drm_device *dev = dev_priv->dev; struct drm_crtc *crtc; struct intel_crtc *intel_crtc; if (!i915_powersave) return; mutex_lock(&dev->struct_mutex); if (IS_I945G(dev) || IS_I945GM(dev)) { DRM_DEBUG_DRIVER("enable memory self refresh on 945\n"); I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN); } list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { /* Skip inactive CRTCs */ if (!crtc->fb) continue; intel_crtc = to_intel_crtc(crtc); if (!intel_crtc->busy) intel_decrease_pllclock(crtc); } mutex_unlock(&dev->struct_mutex); } /** * intel_mark_busy - mark the GPU and possibly the display busy * @dev: drm device * @obj: object we're operating on * * Callers can use this function to indicate that the GPU is busy processing * commands. If @obj matches one of the CRTC objects (i.e. it's a scanout * buffer), we'll also mark the display as busy, so we know to increase its * clock frequency. */ void intel_mark_busy(struct drm_device *dev, struct drm_gem_object *obj) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_crtc *crtc = NULL; struct intel_framebuffer *intel_fb; struct intel_crtc *intel_crtc; if (!drm_core_check_feature(dev, DRIVER_MODESET)) return; if (!dev_priv->busy) { if (IS_I945G(dev) || IS_I945GM(dev)) { u32 fw_blc_self; DRM_DEBUG_DRIVER("disable memory self refresh on 945\n"); fw_blc_self = I915_READ(FW_BLC_SELF); fw_blc_self &= ~FW_BLC_SELF_EN; I915_WRITE(FW_BLC_SELF, fw_blc_self | FW_BLC_SELF_EN_MASK); } dev_priv->busy = true; } else mod_timer(&dev_priv->idle_timer, jiffies + msecs_to_jiffies(GPU_IDLE_TIMEOUT)); list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { if (!crtc->fb) continue; intel_crtc = to_intel_crtc(crtc); intel_fb = to_intel_framebuffer(crtc->fb); if (intel_fb->obj == obj) { if (!intel_crtc->busy) { if (IS_I945G(dev) || IS_I945GM(dev)) { u32 fw_blc_self; DRM_DEBUG_DRIVER("disable memory self refresh on 945\n"); fw_blc_self = I915_READ(FW_BLC_SELF); fw_blc_self &= ~FW_BLC_SELF_EN; I915_WRITE(FW_BLC_SELF, fw_blc_self | FW_BLC_SELF_EN_MASK); } /* Non-busy -> busy, upclock */ intel_increase_pllclock(crtc, true); intel_crtc->busy = true; } else { /* Busy -> busy, put off timer */ mod_timer(&intel_crtc->idle_timer, jiffies + msecs_to_jiffies(CRTC_IDLE_TIMEOUT)); } } } } static void intel_crtc_destroy(struct drm_crtc *crtc) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); drm_crtc_cleanup(crtc); kfree(intel_crtc); } struct intel_unpin_work { struct work_struct work; struct drm_device *dev; struct drm_gem_object *old_fb_obj; struct drm_gem_object *pending_flip_obj; struct drm_pending_vblank_event *event; int pending; }; static void intel_unpin_work_fn(struct work_struct *__work) { struct intel_unpin_work *work = container_of(__work, struct intel_unpin_work, work); mutex_lock(&work->dev->struct_mutex); i915_gem_object_unpin(work->old_fb_obj); drm_gem_object_unreference(work->pending_flip_obj); drm_gem_object_unreference(work->old_fb_obj); mutex_unlock(&work->dev->struct_mutex); kfree(work); } void intel_finish_page_flip(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe]; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_unpin_work *work; struct drm_i915_gem_object *obj_priv; struct drm_pending_vblank_event *e; struct timeval now; unsigned long flags; /* Ignore early vblank irqs */ if (intel_crtc == NULL) return; spin_lock_irqsave(&dev->event_lock, flags); work = intel_crtc->unpin_work; if (work == NULL || !work->pending) { if (work && !work->pending) { obj_priv = work->pending_flip_obj->driver_private; DRM_DEBUG_DRIVER("flip finish: %p (%d) not pending?\n", obj_priv, atomic_read(&obj_priv->pending_flip)); } spin_unlock_irqrestore(&dev->event_lock, flags); return; } intel_crtc->unpin_work = NULL; drm_vblank_put(dev, intel_crtc->pipe); if (work->event) { e = work->event; do_gettimeofday(&now); e->event.sequence = drm_vblank_count(dev, intel_crtc->pipe); e->event.tv_sec = now.tv_sec; e->event.tv_usec = now.tv_usec; list_add_tail(&e->base.link, &e->base.file_priv->event_list); wake_up_interruptible(&e->base.file_priv->event_wait); } spin_unlock_irqrestore(&dev->event_lock, flags); obj_priv = work->pending_flip_obj->driver_private; /* Initial scanout buffer will have a 0 pending flip count */ if ((atomic_read(&obj_priv->pending_flip) == 0) || atomic_dec_and_test(&obj_priv->pending_flip)) DRM_WAKEUP(&dev_priv->pending_flip_queue); schedule_work(&work->work); } void intel_prepare_page_flip(struct drm_device *dev, int plane) { drm_i915_private_t *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]); unsigned long flags; spin_lock_irqsave(&dev->event_lock, flags); if (intel_crtc->unpin_work) { intel_crtc->unpin_work->pending = 1; } else { DRM_DEBUG_DRIVER("preparing flip with no unpin work?\n"); } spin_unlock_irqrestore(&dev->event_lock, flags); } static int intel_crtc_page_flip(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_pending_vblank_event *event) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_framebuffer *intel_fb; struct drm_i915_gem_object *obj_priv; struct drm_gem_object *obj; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_unpin_work *work; unsigned long flags; int pipesrc_reg = (intel_crtc->pipe == 0) ? PIPEASRC : PIPEBSRC; int ret, pipesrc; RING_LOCALS; work = kzalloc(sizeof *work, GFP_KERNEL); if (work == NULL) return -ENOMEM; mutex_lock(&dev->struct_mutex); work->event = event; work->dev = crtc->dev; intel_fb = to_intel_framebuffer(crtc->fb); work->old_fb_obj = intel_fb->obj; INIT_WORK(&work->work, intel_unpin_work_fn); /* We borrow the event spin lock for protecting unpin_work */ spin_lock_irqsave(&dev->event_lock, flags); if (intel_crtc->unpin_work) { DRM_DEBUG_DRIVER("flip queue: crtc already busy\n"); spin_unlock_irqrestore(&dev->event_lock, flags); kfree(work); mutex_unlock(&dev->struct_mutex); return -EBUSY; } intel_crtc->unpin_work = work; spin_unlock_irqrestore(&dev->event_lock, flags); intel_fb = to_intel_framebuffer(fb); obj = intel_fb->obj; ret = intel_pin_and_fence_fb_obj(dev, obj); if (ret != 0) { DRM_DEBUG_DRIVER("flip queue: %p pin & fence failed\n", obj->driver_private); kfree(work); intel_crtc->unpin_work = NULL; mutex_unlock(&dev->struct_mutex); return ret; } /* Reference the objects for the scheduled work. */ drm_gem_object_reference(work->old_fb_obj); drm_gem_object_reference(obj); crtc->fb = fb; i915_gem_object_flush_write_domain(obj); drm_vblank_get(dev, intel_crtc->pipe); obj_priv = obj->driver_private; atomic_inc(&obj_priv->pending_flip); work->pending_flip_obj = obj; BEGIN_LP_RING(4); OUT_RING(MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); OUT_RING(fb->pitch); if (IS_I965G(dev)) { OUT_RING(obj_priv->gtt_offset | obj_priv->tiling_mode); pipesrc = I915_READ(pipesrc_reg); OUT_RING(pipesrc & 0x0fff0fff); } else { OUT_RING(obj_priv->gtt_offset); OUT_RING(MI_NOOP); } ADVANCE_LP_RING(); mutex_unlock(&dev->struct_mutex); return 0; } static const struct drm_crtc_helper_funcs intel_helper_funcs = { .dpms = intel_crtc_dpms, .mode_fixup = intel_crtc_mode_fixup, .mode_set = intel_crtc_mode_set, .mode_set_base = intel_pipe_set_base, .prepare = intel_crtc_prepare, .commit = intel_crtc_commit, .load_lut = intel_crtc_load_lut, }; static const struct drm_crtc_funcs intel_crtc_funcs = { .cursor_set = intel_crtc_cursor_set, .cursor_move = intel_crtc_cursor_move, .gamma_set = intel_crtc_gamma_set, .set_config = drm_crtc_helper_set_config, .destroy = intel_crtc_destroy, .page_flip = intel_crtc_page_flip, }; static void intel_crtc_init(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc; int i; intel_crtc = kzalloc(sizeof(struct intel_crtc) + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), GFP_KERNEL); if (intel_crtc == NULL) return; drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs); drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256); intel_crtc->pipe = pipe; intel_crtc->plane = pipe; for (i = 0; i < 256; i++) { intel_crtc->lut_r[i] = i; intel_crtc->lut_g[i] = i; intel_crtc->lut_b[i] = i; } /* Swap pipes & planes for FBC on pre-965 */ intel_crtc->pipe = pipe; intel_crtc->plane = pipe; if (IS_MOBILE(dev) && (IS_I9XX(dev) && !IS_I965G(dev))) { DRM_DEBUG_KMS("swapping pipes & planes for FBC\n"); intel_crtc->plane = ((pipe == 0) ? 1 : 0); } BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) || dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL); dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base; dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base; intel_crtc->cursor_addr = 0; intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF; drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs); intel_crtc->busy = false; setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer, (unsigned long)intel_crtc); } int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data; struct drm_mode_object *drmmode_obj; struct intel_crtc *crtc; if (!dev_priv) { DRM_ERROR("called with no initialization\n"); return -EINVAL; } drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id, DRM_MODE_OBJECT_CRTC); if (!drmmode_obj) { DRM_ERROR("no such CRTC id\n"); return -EINVAL; } crtc = to_intel_crtc(obj_to_crtc(drmmode_obj)); pipe_from_crtc_id->pipe = crtc->pipe; return 0; } struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe) { struct drm_crtc *crtc = NULL; list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); if (intel_crtc->pipe == pipe) break; } return crtc; } static int intel_connector_clones(struct drm_device *dev, int type_mask) { int index_mask = 0; struct drm_connector *connector; int entry = 0; list_for_each_entry(connector, &dev->mode_config.connector_list, head) { struct intel_output *intel_output = to_intel_output(connector); if (type_mask & intel_output->clone_mask) index_mask |= (1 << entry); entry++; } return index_mask; } static void intel_setup_outputs(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_connector *connector; intel_crt_init(dev); /* Set up integrated LVDS */ if (IS_MOBILE(dev) && !IS_I830(dev)) intel_lvds_init(dev); if (HAS_PCH_SPLIT(dev)) { int found; if (IS_MOBILE(dev) && (I915_READ(DP_A) & DP_DETECTED)) intel_dp_init(dev, DP_A); if (I915_READ(HDMIB) & PORT_DETECTED) { /* check SDVOB */ /* found = intel_sdvo_init(dev, HDMIB); */ found = 0; if (!found) intel_hdmi_init(dev, HDMIB); if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED)) intel_dp_init(dev, PCH_DP_B); } if (I915_READ(HDMIC) & PORT_DETECTED) intel_hdmi_init(dev, HDMIC); if (I915_READ(HDMID) & PORT_DETECTED) intel_hdmi_init(dev, HDMID); if (I915_READ(PCH_DP_C) & DP_DETECTED) intel_dp_init(dev, PCH_DP_C); if (I915_READ(PCH_DP_D) & DP_DETECTED) intel_dp_init(dev, PCH_DP_D); } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) { bool found = false; if (I915_READ(SDVOB) & SDVO_DETECTED) { DRM_DEBUG_KMS("probing SDVOB\n"); found = intel_sdvo_init(dev, SDVOB); if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) { DRM_DEBUG_KMS("probing HDMI on SDVOB\n"); intel_hdmi_init(dev, SDVOB); } if (!found && SUPPORTS_INTEGRATED_DP(dev)) { DRM_DEBUG_KMS("probing DP_B\n"); intel_dp_init(dev, DP_B); } } /* Before G4X SDVOC doesn't have its own detect register */ if (I915_READ(SDVOB) & SDVO_DETECTED) { DRM_DEBUG_KMS("probing SDVOC\n"); found = intel_sdvo_init(dev, SDVOC); } if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) { if (SUPPORTS_INTEGRATED_HDMI(dev)) { DRM_DEBUG_KMS("probing HDMI on SDVOC\n"); intel_hdmi_init(dev, SDVOC); } if (SUPPORTS_INTEGRATED_DP(dev)) { DRM_DEBUG_KMS("probing DP_C\n"); intel_dp_init(dev, DP_C); } } if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED)) { DRM_DEBUG_KMS("probing DP_D\n"); intel_dp_init(dev, DP_D); } } else if (IS_GEN2(dev)) intel_dvo_init(dev); if (SUPPORTS_TV(dev)) intel_tv_init(dev); list_for_each_entry(connector, &dev->mode_config.connector_list, head) { struct intel_output *intel_output = to_intel_output(connector); struct drm_encoder *encoder = &intel_output->enc; encoder->possible_crtcs = intel_output->crtc_mask; encoder->possible_clones = intel_connector_clones(dev, intel_output->clone_mask); } } static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb) { struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); struct drm_device *dev = fb->dev; if (fb->fbdev) intelfb_remove(dev, fb); drm_framebuffer_cleanup(fb); drm_gem_object_unreference_unlocked(intel_fb->obj); kfree(intel_fb); } static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb, struct drm_file *file_priv, unsigned int *handle) { struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); struct drm_gem_object *object = intel_fb->obj; return drm_gem_handle_create(file_priv, object, handle); } static const struct drm_framebuffer_funcs intel_fb_funcs = { .destroy = intel_user_framebuffer_destroy, .create_handle = intel_user_framebuffer_create_handle, }; int intel_framebuffer_create(struct drm_device *dev, struct drm_mode_fb_cmd *mode_cmd, struct drm_framebuffer **fb, struct drm_gem_object *obj) { struct intel_framebuffer *intel_fb; int ret; intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL); if (!intel_fb) return -ENOMEM; ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs); if (ret) { DRM_ERROR("framebuffer init failed %d\n", ret); return ret; } drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd); intel_fb->obj = obj; *fb = &intel_fb->base; return 0; } static struct drm_framebuffer * intel_user_framebuffer_create(struct drm_device *dev, struct drm_file *filp, struct drm_mode_fb_cmd *mode_cmd) { struct drm_gem_object *obj; struct drm_framebuffer *fb; int ret; obj = drm_gem_object_lookup(dev, filp, mode_cmd->handle); if (!obj) return NULL; ret = intel_framebuffer_create(dev, mode_cmd, &fb, obj); if (ret) { drm_gem_object_unreference_unlocked(obj); return NULL; } return fb; } static const struct drm_mode_config_funcs intel_mode_funcs = { .fb_create = intel_user_framebuffer_create, .fb_changed = intelfb_probe, }; static struct drm_gem_object * intel_alloc_power_context(struct drm_device *dev) { struct drm_gem_object *pwrctx; int ret; pwrctx = drm_gem_object_alloc(dev, 4096); if (!pwrctx) { DRM_DEBUG("failed to alloc power context, RC6 disabled\n"); return NULL; } mutex_lock(&dev->struct_mutex); ret = i915_gem_object_pin(pwrctx, 4096); if (ret) { DRM_ERROR("failed to pin power context: %d\n", ret); goto err_unref; } ret = i915_gem_object_set_to_gtt_domain(pwrctx, 1); if (ret) { DRM_ERROR("failed to set-domain on power context: %d\n", ret); goto err_unpin; } mutex_unlock(&dev->struct_mutex); return pwrctx; err_unpin: i915_gem_object_unpin(pwrctx); err_unref: drm_gem_object_unreference(pwrctx); mutex_unlock(&dev->struct_mutex); return NULL; } void ironlake_enable_drps(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 rgvmodectl = I915_READ(MEMMODECTL), rgvswctl; u8 fmax, fmin, fstart, vstart; int i = 0; /* 100ms RC evaluation intervals */ I915_WRITE(RCUPEI, 100000); I915_WRITE(RCDNEI, 100000); /* Set max/min thresholds to 90ms and 80ms respectively */ I915_WRITE(RCBMAXAVG, 90000); I915_WRITE(RCBMINAVG, 80000); I915_WRITE(MEMIHYST, 1); /* Set up min, max, and cur for interrupt handling */ fmax = (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT; fmin = (rgvmodectl & MEMMODE_FMIN_MASK); fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >> MEMMODE_FSTART_SHIFT; vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >> PXVFREQ_PX_SHIFT; dev_priv->max_delay = fstart; /* can't go to fmax w/o IPS */ dev_priv->min_delay = fmin; dev_priv->cur_delay = fstart; I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN); /* * Interrupts will be enabled in ironlake_irq_postinstall */ I915_WRITE(VIDSTART, vstart); POSTING_READ(VIDSTART); rgvmodectl |= MEMMODE_SWMODE_EN; I915_WRITE(MEMMODECTL, rgvmodectl); while (I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) { if (i++ > 100) { DRM_ERROR("stuck trying to change perf mode\n"); break; } msleep(1); } msleep(1); rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) | (fstart << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM; I915_WRITE(MEMSWCTL, rgvswctl); POSTING_READ(MEMSWCTL); rgvswctl |= MEMCTL_CMD_STS; I915_WRITE(MEMSWCTL, rgvswctl); } void ironlake_disable_drps(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 rgvswctl; u8 fstart; /* Ack interrupts, disable EFC interrupt */ I915_WRITE(MEMINTREN, I915_READ(MEMINTREN) & ~MEMINT_EVAL_CHG_EN); I915_WRITE(MEMINTRSTS, MEMINT_EVAL_CHG); I915_WRITE(DEIER, I915_READ(DEIER) & ~DE_PCU_EVENT); I915_WRITE(DEIIR, DE_PCU_EVENT); I915_WRITE(DEIMR, I915_READ(DEIMR) | DE_PCU_EVENT); /* Go back to the starting frequency */ fstart = (I915_READ(MEMMODECTL) & MEMMODE_FSTART_MASK) >> MEMMODE_FSTART_SHIFT; rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) | (fstart << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM; I915_WRITE(MEMSWCTL, rgvswctl); msleep(1); rgvswctl |= MEMCTL_CMD_STS; I915_WRITE(MEMSWCTL, rgvswctl); msleep(1); } void intel_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; /* * Disable clock gating reported to work incorrectly according to the * specs, but enable as much else as we can. */ if (HAS_PCH_SPLIT(dev)) { return; } else if (IS_G4X(dev)) { uint32_t dspclk_gate; I915_WRITE(RENCLK_GATE_D1, 0); I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE | GS_UNIT_CLOCK_GATE_DISABLE | CL_UNIT_CLOCK_GATE_DISABLE); I915_WRITE(RAMCLK_GATE_D, 0); dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE | OVRUNIT_CLOCK_GATE_DISABLE | OVCUNIT_CLOCK_GATE_DISABLE; if (IS_GM45(dev)) dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE; I915_WRITE(DSPCLK_GATE_D, dspclk_gate); } else if (IS_I965GM(dev)) { I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE); I915_WRITE(RENCLK_GATE_D2, 0); I915_WRITE(DSPCLK_GATE_D, 0); I915_WRITE(RAMCLK_GATE_D, 0); I915_WRITE16(DEUC, 0); } else if (IS_I965G(dev)) { I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE | I965_RCC_CLOCK_GATE_DISABLE | I965_RCPB_CLOCK_GATE_DISABLE | I965_ISC_CLOCK_GATE_DISABLE | I965_FBC_CLOCK_GATE_DISABLE); I915_WRITE(RENCLK_GATE_D2, 0); } else if (IS_I9XX(dev)) { u32 dstate = I915_READ(D_STATE); dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING | DSTATE_DOT_CLOCK_GATING; I915_WRITE(D_STATE, dstate); } else if (IS_I85X(dev) || IS_I865G(dev)) { I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE); } else if (IS_I830(dev)) { I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE); } /* * GPU can automatically power down the render unit if given a page * to save state. */ if (I915_HAS_RC6(dev) && drm_core_check_feature(dev, DRIVER_MODESET)) { struct drm_i915_gem_object *obj_priv = NULL; if (dev_priv->pwrctx) { obj_priv = dev_priv->pwrctx->driver_private; } else { struct drm_gem_object *pwrctx; pwrctx = intel_alloc_power_context(dev); if (pwrctx) { dev_priv->pwrctx = pwrctx; obj_priv = pwrctx->driver_private; } } if (obj_priv) { I915_WRITE(PWRCTXA, obj_priv->gtt_offset | PWRCTX_EN); I915_WRITE(MCHBAR_RENDER_STANDBY, I915_READ(MCHBAR_RENDER_STANDBY) & ~RCX_SW_EXIT); } } } /* Set up chip specific display functions */ static void intel_init_display(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; /* We always want a DPMS function */ if (HAS_PCH_SPLIT(dev)) dev_priv->display.dpms = ironlake_crtc_dpms; else dev_priv->display.dpms = i9xx_crtc_dpms; /* Only mobile has FBC, leave pointers NULL for other chips */ if (IS_MOBILE(dev)) { if (IS_GM45(dev)) { dev_priv->display.fbc_enabled = g4x_fbc_enabled; dev_priv->display.enable_fbc = g4x_enable_fbc; dev_priv->display.disable_fbc = g4x_disable_fbc; } else if (IS_I965GM(dev) || IS_I945GM(dev) || IS_I915GM(dev)) { dev_priv->display.fbc_enabled = i8xx_fbc_enabled; dev_priv->display.enable_fbc = i8xx_enable_fbc; dev_priv->display.disable_fbc = i8xx_disable_fbc; } /* 855GM needs testing */ } /* Returns the core display clock speed */ if (IS_I945G(dev) || (IS_G33(dev) && ! IS_PINEVIEW_M(dev))) dev_priv->display.get_display_clock_speed = i945_get_display_clock_speed; else if (IS_I915G(dev)) dev_priv->display.get_display_clock_speed = i915_get_display_clock_speed; else if (IS_I945GM(dev) || IS_845G(dev) || IS_PINEVIEW_M(dev)) dev_priv->display.get_display_clock_speed = i9xx_misc_get_display_clock_speed; else if (IS_I915GM(dev)) dev_priv->display.get_display_clock_speed = i915gm_get_display_clock_speed; else if (IS_I865G(dev)) dev_priv->display.get_display_clock_speed = i865_get_display_clock_speed; else if (IS_I85X(dev)) dev_priv->display.get_display_clock_speed = i855_get_display_clock_speed; else /* 852, 830 */ dev_priv->display.get_display_clock_speed = i830_get_display_clock_speed; /* For FIFO watermark updates */ if (HAS_PCH_SPLIT(dev)) dev_priv->display.update_wm = NULL; else if (IS_G4X(dev)) dev_priv->display.update_wm = g4x_update_wm; else if (IS_I965G(dev)) dev_priv->display.update_wm = i965_update_wm; else if (IS_I9XX(dev) || IS_MOBILE(dev)) { dev_priv->display.update_wm = i9xx_update_wm; dev_priv->display.get_fifo_size = i9xx_get_fifo_size; } else { if (IS_I85X(dev)) dev_priv->display.get_fifo_size = i85x_get_fifo_size; else if (IS_845G(dev)) dev_priv->display.get_fifo_size = i845_get_fifo_size; else dev_priv->display.get_fifo_size = i830_get_fifo_size; dev_priv->display.update_wm = i830_update_wm; } } void intel_modeset_init(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; int num_pipe; int i; drm_mode_config_init(dev); dev->mode_config.min_width = 0; dev->mode_config.min_height = 0; dev->mode_config.funcs = (void *)&intel_mode_funcs; intel_init_display(dev); if (IS_I965G(dev)) { dev->mode_config.max_width = 8192; dev->mode_config.max_height = 8192; } else if (IS_I9XX(dev)) { dev->mode_config.max_width = 4096; dev->mode_config.max_height = 4096; } else { dev->mode_config.max_width = 2048; dev->mode_config.max_height = 2048; } /* set memory base */ if (IS_I9XX(dev)) dev->mode_config.fb_base = pci_resource_start(dev->pdev, 2); else dev->mode_config.fb_base = pci_resource_start(dev->pdev, 0); if (IS_MOBILE(dev) || IS_I9XX(dev)) num_pipe = 2; else num_pipe = 1; DRM_DEBUG_KMS("%d display pipe%s available.\n", num_pipe, num_pipe > 1 ? "s" : ""); for (i = 0; i < num_pipe; i++) { intel_crtc_init(dev, i); } intel_setup_outputs(dev); intel_init_clock_gating(dev); if (IS_IRONLAKE_M(dev)) ironlake_enable_drps(dev); INIT_WORK(&dev_priv->idle_work, intel_idle_update); setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer, (unsigned long)dev); intel_setup_overlay(dev); if (IS_PINEVIEW(dev) && !intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->fsb_freq, dev_priv->mem_freq)) DRM_INFO("failed to find known CxSR latency " "(found fsb freq %d, mem freq %d), disabling CxSR\n", dev_priv->fsb_freq, dev_priv->mem_freq); } void intel_modeset_cleanup(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_crtc *crtc; struct intel_crtc *intel_crtc; mutex_lock(&dev->struct_mutex); list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { /* Skip inactive CRTCs */ if (!crtc->fb) continue; intel_crtc = to_intel_crtc(crtc); intel_increase_pllclock(crtc, false); del_timer_sync(&intel_crtc->idle_timer); } del_timer_sync(&dev_priv->idle_timer); if (dev_priv->display.disable_fbc) dev_priv->display.disable_fbc(dev); if (dev_priv->pwrctx) { struct drm_i915_gem_object *obj_priv; obj_priv = dev_priv->pwrctx->driver_private; I915_WRITE(PWRCTXA, obj_priv->gtt_offset &~ PWRCTX_EN); I915_READ(PWRCTXA); i915_gem_object_unpin(dev_priv->pwrctx); drm_gem_object_unreference(dev_priv->pwrctx); } if (IS_IRONLAKE_M(dev)) ironlake_disable_drps(dev); mutex_unlock(&dev->struct_mutex); drm_mode_config_cleanup(dev); } /* current intel driver doesn't take advantage of encoders always give back the encoder for the connector */ struct drm_encoder *intel_best_encoder(struct drm_connector *connector) { struct intel_output *intel_output = to_intel_output(connector); return &intel_output->enc; } /* * set vga decode state - true == enable VGA decode */ int intel_modeset_vga_set_state(struct drm_device *dev, bool state) { struct drm_i915_private *dev_priv = dev->dev_private; u16 gmch_ctrl; pci_read_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, &gmch_ctrl); if (state) gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE; else gmch_ctrl |= INTEL_GMCH_VGA_DISABLE; pci_write_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, gmch_ctrl); return 0; }