config SUPERH def_bool y select EXPERT select CLKDEV_LOOKUP select HAVE_IDE if HAS_IOPORT select HAVE_MEMBLOCK select HAVE_MEMBLOCK_NODE_MAP select ARCH_DISCARD_MEMBLOCK select HAVE_OPROFILE select HAVE_GENERIC_DMA_COHERENT select HAVE_ARCH_TRACEHOOK select HAVE_DMA_API_DEBUG select HAVE_DMA_ATTRS select HAVE_IRQ_WORK select HAVE_PERF_EVENTS select HAVE_DEBUG_BUGVERBOSE select ARCH_HAVE_CUSTOM_GPIO_H select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A) select PERF_USE_VMALLOC select HAVE_DEBUG_KMEMLEAK select HAVE_KERNEL_GZIP select HAVE_KERNEL_BZIP2 select HAVE_KERNEL_LZMA select HAVE_KERNEL_XZ select HAVE_KERNEL_LZO select HAVE_UID16 select ARCH_WANT_IPC_PARSE_VERSION select HAVE_SYSCALL_TRACEPOINTS select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_GENERIC_HARDIRQS select MAY_HAVE_SPARSE_IRQ select IRQ_FORCED_THREADING select RTC_LIB select GENERIC_ATOMIC64 select GENERIC_IRQ_SHOW select GENERIC_SMP_IDLE_THREAD select GENERIC_CLOCKEVENTS select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER select MODULES_USE_ELF_RELA help The SuperH is a RISC processor targeted for use in embedded systems and consumer electronics; it was also used in the Sega Dreamcast gaming console. The SuperH port has a home page at . config SUPERH32 def_bool ARCH = "sh" select HAVE_KPROBES select HAVE_KRETPROBES select HAVE_IOREMAP_PROT if MMU && !X2TLB select HAVE_FUNCTION_TRACER select HAVE_FTRACE_MCOUNT_RECORD select HAVE_DYNAMIC_FTRACE select HAVE_FUNCTION_TRACE_MCOUNT_TEST select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE select ARCH_WANT_IPC_PARSE_VERSION select HAVE_FUNCTION_GRAPH_TRACER select HAVE_ARCH_KGDB select HAVE_HW_BREAKPOINT select HAVE_MIXED_BREAKPOINTS_REGS select PERF_EVENTS select ARCH_HIBERNATION_POSSIBLE if MMU select SPARSE_IRQ config SUPERH64 def_bool ARCH = "sh64" select KALLSYMS config ARCH_DEFCONFIG string default "arch/sh/configs/shx3_defconfig" if SUPERH32 default "arch/sh/configs/cayman_defconfig" if SUPERH64 config RWSEM_GENERIC_SPINLOCK def_bool y config RWSEM_XCHGADD_ALGORITHM bool config GENERIC_BUG def_bool y depends on BUG && SUPERH32 config GENERIC_CSUM def_bool y depends on SUPERH64 config GENERIC_HWEIGHT def_bool y config IRQ_PER_CPU def_bool y config GENERIC_GPIO def_bool n config GENERIC_CALIBRATE_DELAY bool config GENERIC_LOCKBREAK def_bool y depends on SMP && PREEMPT config ARCH_SUSPEND_POSSIBLE def_bool n config ARCH_HIBERNATION_POSSIBLE def_bool n config SYS_SUPPORTS_APM_EMULATION bool select ARCH_SUSPEND_POSSIBLE config SYS_SUPPORTS_HUGETLBFS bool config SYS_SUPPORTS_SMP bool config SYS_SUPPORTS_NUMA bool config SYS_SUPPORTS_PCI bool config SYS_SUPPORTS_CMT bool config SYS_SUPPORTS_MTU2 bool config SYS_SUPPORTS_TMU bool config STACKTRACE_SUPPORT def_bool y config LOCKDEP_SUPPORT def_bool y config HAVE_LATENCYTOP_SUPPORT def_bool y config ARCH_HAS_ILOG2_U32 def_bool n config ARCH_HAS_ILOG2_U64 def_bool n config ARCH_NO_VIRT_TO_BUS def_bool y config ARCH_HAS_DEFAULT_IDLE def_bool y config NO_IOPORT def_bool !PCI depends on !SH_CAYMAN && !SH_SH4202_MICRODEV && !SH_SHMIN && \ !SH_HP6XX && !SH_SOLUTION_ENGINE config IO_TRAPPED bool config SWAP_IO_SPACE bool config DMA_COHERENT bool config DMA_NONCOHERENT def_bool !DMA_COHERENT config NEED_DMA_MAP_STATE def_bool DMA_NONCOHERENT config NEED_SG_DMA_LENGTH def_bool y source "init/Kconfig" source "kernel/Kconfig.freezer" menu "System type" # # Processor families # config CPU_SH2 bool config CPU_SH2A bool select CPU_SH2 select UNCACHED_MAPPING config CPU_SH3 bool select CPU_HAS_INTEVT select CPU_HAS_SR_RB select SYS_SUPPORTS_TMU config CPU_SH4 bool select CPU_HAS_INTEVT select CPU_HAS_SR_RB select CPU_HAS_FPU if !CPU_SH4AL_DSP select SYS_SUPPORTS_TMU select SYS_SUPPORTS_HUGETLBFS if MMU config CPU_SH4A bool select CPU_SH4 config CPU_SH4AL_DSP bool select CPU_SH4A select CPU_HAS_DSP config CPU_SH5 bool select CPU_HAS_FPU select SYS_SUPPORTS_TMU select SYS_SUPPORTS_HUGETLBFS if MMU config CPU_SHX2 bool config CPU_SHX3 bool select DMA_COHERENT select SYS_SUPPORTS_SMP select SYS_SUPPORTS_NUMA config ARCH_SHMOBILE bool select ARCH_SUSPEND_POSSIBLE select PM select PM_RUNTIME config CPU_HAS_PMU depends on CPU_SH4 || CPU_SH4A default y bool if SUPERH32 choice prompt "Processor sub-type selection" # # Processor subtypes # # SH-2 Processor Support config CPU_SUBTYPE_SH7619 bool "Support SH7619 processor" select CPU_SH2 select SYS_SUPPORTS_CMT # SH-2A Processor Support config CPU_SUBTYPE_SH7201 bool "Support SH7201 processor" select CPU_SH2A select CPU_HAS_FPU select SYS_SUPPORTS_MTU2 config CPU_SUBTYPE_SH7203 bool "Support SH7203 processor" select CPU_SH2A select CPU_HAS_FPU select SYS_SUPPORTS_CMT select SYS_SUPPORTS_MTU2 select ARCH_WANT_OPTIONAL_GPIOLIB select PINCTRL config CPU_SUBTYPE_SH7206 bool "Support SH7206 processor" select CPU_SH2A select SYS_SUPPORTS_CMT select SYS_SUPPORTS_MTU2 config CPU_SUBTYPE_SH7263 bool "Support SH7263 processor" select CPU_SH2A select CPU_HAS_FPU select SYS_SUPPORTS_CMT select SYS_SUPPORTS_MTU2 config CPU_SUBTYPE_SH7264 bool "Support SH7264 processor" select CPU_SH2A select CPU_HAS_FPU select SYS_SUPPORTS_CMT select SYS_SUPPORTS_MTU2 select PINCTRL config CPU_SUBTYPE_SH7269 bool "Support SH7269 processor" select CPU_SH2A select CPU_HAS_FPU select SYS_SUPPORTS_CMT select SYS_SUPPORTS_MTU2 select PINCTRL config CPU_SUBTYPE_MXG bool "Support MX-G processor" select CPU_SH2A select SYS_SUPPORTS_MTU2 help Select MX-G if running on an R8A03022BG part. # SH-3 Processor Support config CPU_SUBTYPE_SH7705 bool "Support SH7705 processor" select CPU_SH3 config CPU_SUBTYPE_SH7706 bool "Support SH7706 processor" select CPU_SH3 help Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU. config CPU_SUBTYPE_SH7707 bool "Support SH7707 processor" select CPU_SH3 help Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU. config CPU_SUBTYPE_SH7708 bool "Support SH7708 processor" select CPU_SH3 help Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or if you have a 100 Mhz SH-3 HD6417708R CPU. config CPU_SUBTYPE_SH7709 bool "Support SH7709 processor" select CPU_SH3 help Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU. config CPU_SUBTYPE_SH7710 bool "Support SH7710 processor" select CPU_SH3 select CPU_HAS_DSP help Select SH7710 if you have a SH3-DSP SH7710 CPU. config CPU_SUBTYPE_SH7712 bool "Support SH7712 processor" select CPU_SH3 select CPU_HAS_DSP help Select SH7712 if you have a SH3-DSP SH7712 CPU. config CPU_SUBTYPE_SH7720 bool "Support SH7720 processor" select CPU_SH3 select CPU_HAS_DSP select SYS_SUPPORTS_CMT select ARCH_WANT_OPTIONAL_GPIOLIB select USB_ARCH_HAS_OHCI select USB_OHCI_SH if USB_OHCI_HCD select PINCTRL help Select SH7720 if you have a SH3-DSP SH7720 CPU. config CPU_SUBTYPE_SH7721 bool "Support SH7721 processor" select CPU_SH3 select CPU_HAS_DSP select SYS_SUPPORTS_CMT select USB_ARCH_HAS_OHCI select USB_OHCI_SH if USB_OHCI_HCD help Select SH7721 if you have a SH3-DSP SH7721 CPU. # SH-4 Processor Support config CPU_SUBTYPE_SH7750 bool "Support SH7750 processor" select CPU_SH4 help Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU. config CPU_SUBTYPE_SH7091 bool "Support SH7091 processor" select CPU_SH4 help Select SH7091 if you have an SH-4 based Sega device (such as the Dreamcast, Naomi, and Naomi 2). config CPU_SUBTYPE_SH7750R bool "Support SH7750R processor" select CPU_SH4 config CPU_SUBTYPE_SH7750S bool "Support SH7750S processor" select CPU_SH4 config CPU_SUBTYPE_SH7751 bool "Support SH7751 processor" select CPU_SH4 help Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU, or if you have a HD6417751R CPU. config CPU_SUBTYPE_SH7751R bool "Support SH7751R processor" select CPU_SH4 config CPU_SUBTYPE_SH7760 bool "Support SH7760 processor" select CPU_SH4 config CPU_SUBTYPE_SH4_202 bool "Support SH4-202 processor" select CPU_SH4 # SH-4A Processor Support config CPU_SUBTYPE_SH7723 bool "Support SH7723 processor" select CPU_SH4A select CPU_SHX2 select ARCH_SHMOBILE select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_CMT select ARCH_WANT_OPTIONAL_GPIOLIB select PINCTRL help Select SH7723 if you have an SH-MobileR2 CPU. config CPU_SUBTYPE_SH7724 bool "Support SH7724 processor" select CPU_SH4A select CPU_SHX2 select ARCH_SHMOBILE select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_CMT select ARCH_WANT_OPTIONAL_GPIOLIB select PINCTRL help Select SH7724 if you have an SH-MobileR2R CPU. config CPU_SUBTYPE_SH7734 bool "Support SH7734 processor" select CPU_SH4A select CPU_SHX2 select ARCH_WANT_OPTIONAL_GPIOLIB select USB_ARCH_HAS_OHCI select USB_ARCH_HAS_EHCI select PINCTRL help Select SH7734 if you have a SH4A SH7734 CPU. config CPU_SUBTYPE_SH7757 bool "Support SH7757 processor" select CPU_SH4A select CPU_SHX2 select ARCH_WANT_OPTIONAL_GPIOLIB select USB_ARCH_HAS_OHCI select USB_ARCH_HAS_EHCI select PINCTRL help Select SH7757 if you have a SH4A SH7757 CPU. config CPU_SUBTYPE_SH7763 bool "Support SH7763 processor" select CPU_SH4A select USB_ARCH_HAS_OHCI select USB_OHCI_SH if USB_OHCI_HCD help Select SH7763 if you have a SH4A SH7763(R5S77631) CPU. config CPU_SUBTYPE_SH7770 bool "Support SH7770 processor" select CPU_SH4A config CPU_SUBTYPE_SH7780 bool "Support SH7780 processor" select CPU_SH4A config CPU_SUBTYPE_SH7785 bool "Support SH7785 processor" select CPU_SH4A select CPU_SHX2 select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA select ARCH_WANT_OPTIONAL_GPIOLIB select PINCTRL config CPU_SUBTYPE_SH7786 bool "Support SH7786 processor" select CPU_SH4A select CPU_SHX3 select CPU_HAS_PTEAEX select GENERIC_CLOCKEVENTS_BROADCAST if SMP select ARCH_WANT_OPTIONAL_GPIOLIB select USB_ARCH_HAS_OHCI select USB_OHCI_SH if USB_OHCI_HCD select USB_ARCH_HAS_EHCI select USB_EHCI_SH if USB_EHCI_HCD select PINCTRL config CPU_SUBTYPE_SHX3 bool "Support SH-X3 processor" select CPU_SH4A select CPU_SHX3 select GENERIC_CLOCKEVENTS_BROADCAST if SMP select ARCH_REQUIRE_GPIOLIB # SH4AL-DSP Processor Support config CPU_SUBTYPE_SH7343 bool "Support SH7343 processor" select CPU_SH4AL_DSP select ARCH_SHMOBILE select SYS_SUPPORTS_CMT config CPU_SUBTYPE_SH7722 bool "Support SH7722 processor" select CPU_SH4AL_DSP select CPU_SHX2 select ARCH_SHMOBILE select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA select SYS_SUPPORTS_CMT select ARCH_WANT_OPTIONAL_GPIOLIB select PINCTRL config CPU_SUBTYPE_SH7366 bool "Support SH7366 processor" select CPU_SH4AL_DSP select CPU_SHX2 select ARCH_SHMOBILE select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA select SYS_SUPPORTS_CMT endchoice endif if SUPERH64 choice prompt "Processor sub-type selection" # SH-5 Processor Support config CPU_SUBTYPE_SH5_101 bool "Support SH5-101 processor" select CPU_SH5 config CPU_SUBTYPE_SH5_103 bool "Support SH5-103 processor" select CPU_SH5 endchoice endif source "arch/sh/mm/Kconfig" source "arch/sh/Kconfig.cpu" source "arch/sh/boards/Kconfig" menu "Timer and clock configuration" config SH_TIMER_TMU bool "TMU timer driver" depends on SYS_SUPPORTS_TMU default y help This enables the build of the TMU timer driver. config SH_TIMER_CMT bool "CMT timer driver" depends on SYS_SUPPORTS_CMT default y help This enables build of the CMT timer driver. config SH_TIMER_MTU2 bool "MTU2 timer driver" depends on SYS_SUPPORTS_MTU2 default y help This enables build of the MTU2 timer driver. config SH_PCLK_FREQ int "Peripheral clock frequency (in Hz)" depends on SH_CLK_CPG_LEGACY default "31250000" if CPU_SUBTYPE_SH7619 default "33333333" if CPU_SUBTYPE_SH7770 || \ CPU_SUBTYPE_SH7760 || \ CPU_SUBTYPE_SH7705 || \ CPU_SUBTYPE_SH7203 || \ CPU_SUBTYPE_SH7206 || \ CPU_SUBTYPE_SH7263 || \ CPU_SUBTYPE_MXG default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R default "66000000" if CPU_SUBTYPE_SH4_202 default "50000000" help This option is used to specify the peripheral clock frequency. This is necessary for determining the reference clock value on platforms lacking an RTC. config SH_CLK_CPG def_bool y config SH_CLK_CPG_LEGACY depends on SH_CLK_CPG def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \ !CPU_SHX3 && !CPU_SUBTYPE_SH7757 && \ !CPU_SUBTYPE_SH7734 && !CPU_SUBTYPE_SH7264 && \ !CPU_SUBTYPE_SH7269 endmenu menu "CPU Frequency scaling" source "drivers/cpufreq/Kconfig" config SH_CPU_FREQ tristate "SuperH CPU Frequency driver" depends on CPU_FREQ select CPU_FREQ_TABLE help This adds the cpufreq driver for SuperH. Any CPU that supports clock rate rounding through the clock framework can use this driver. While it will make the kernel slightly larger, this is harmless for CPUs that don't support rate rounding. The driver will also generate a notice in the boot log before disabling itself if the CPU in question is not capable of rate rounding. For details, take a look at . If unsure, say N. endmenu source "arch/sh/drivers/Kconfig" endmenu menu "Kernel features" source kernel/Kconfig.hz config KEXEC bool "kexec system call (EXPERIMENTAL)" depends on SUPERH32 && EXPERIMENTAL && MMU help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot but it is independent of the system firmware. And like a reboot you can start any kernel with it, not just Linux. The name comes from the similarity to the exec system call. It is an ongoing process to be certain the hardware in a machine is properly shutdown, so do not be surprised if this code does not initially work for you. It may help to enable device hotplugging support. As of this writing the exact hardware interface is strongly in flux, so no good recommendation can be made. config CRASH_DUMP bool "kernel crash dumps (EXPERIMENTAL)" depends on SUPERH32 && EXPERIMENTAL && BROKEN_ON_SMP help Generate crash dump after being started by kexec. This should be normally only set in special crash dump kernels which are loaded in the main kernel with kexec-tools into a specially reserved region and then later executed after a crash by kdump/kexec. The crash dump kernel must be compiled to a memory address not used by the main kernel using PHYSICAL_START. For more details see Documentation/kdump/kdump.txt config KEXEC_JUMP bool "kexec jump (EXPERIMENTAL)" depends on SUPERH32 && KEXEC && HIBERNATION && EXPERIMENTAL help Jump between original kernel and kexeced kernel and invoke code via KEXEC config PHYSICAL_START hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP) default MEMORY_START ---help--- This gives the physical address where the kernel is loaded and is ordinarily the same as MEMORY_START. Different values are primarily used in the case of kexec on panic where the fail safe kernel needs to run at a different address than the panic-ed kernel. config SECCOMP bool "Enable seccomp to safely compute untrusted bytecode" depends on PROC_FS help This kernel feature is useful for number crunching applications that may need to compute untrusted bytecode during their execution. By using pipes or other transports made available to the process as file descriptors supporting the read/write syscalls, it's possible to isolate those applications in their own address space using seccomp. Once seccomp is enabled via prctl, it cannot be disabled and the task is only allowed to execute a few safe syscalls defined by each seccomp mode. If unsure, say N. config CC_STACKPROTECTOR bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" depends on SUPERH32 && EXPERIMENTAL help This option turns on the -fstack-protector GCC feature. This feature puts, at the beginning of functions, a canary value on the stack just before the return address, and validates the value just before actually returning. Stack based buffer overflows (that need to overwrite this return address) now also overwrite the canary, which gets detected and the attack is then neutralized via a kernel panic. This feature requires gcc version 4.2 or above. config SMP bool "Symmetric multi-processing support" depends on SYS_SUPPORTS_SMP select USE_GENERIC_SMP_HELPERS ---help--- This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If you have a system with more than one CPU, say Y. If you say N here, the kernel will run on single and multiprocessor machines, but will use only one CPU of a multiprocessor machine. If you say Y here, the kernel will run on many, but not all, singleprocessor machines. On a singleprocessor machine, the kernel will run faster if you say N here. People using multiprocessor machines who say Y here should also say Y to "Enhanced Real Time Clock Support", below. See also and the SMP-HOWTO available at . If you don't know what to do here, say N. config NR_CPUS int "Maximum number of CPUs (2-32)" range 2 32 depends on SMP default "4" if CPU_SUBTYPE_SHX3 default "2" help This allows you to specify the maximum number of CPUs which this kernel will support. The maximum supported value is 32 and the minimum value which makes sense is 2. This is purely to save memory - each supported CPU adds approximately eight kilobytes to the kernel image. config HOTPLUG_CPU bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" depends on SMP && HOTPLUG && EXPERIMENTAL help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. source "kernel/Kconfig.preempt" config GUSA def_bool y depends on !SMP && SUPERH32 help This enables support for gUSA (general UserSpace Atomicity). This is the default implementation for both UP and non-ll/sc CPUs, and is used by the libc, amongst others. For additional information, design information can be found in . This should only be disabled for special cases where alternate atomicity implementations exist. config GUSA_RB bool "Implement atomic operations by roll-back (gRB) (EXPERIMENTAL)" depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A) help Enabling this option will allow the kernel to implement some atomic operations using a software implementation of load-locked/ store-conditional (LLSC). On machines which do not have hardware LLSC, this should be more efficient than the other alternative of disabling interrupts around the atomic sequence. config HW_PERF_EVENTS bool "Enable hardware performance counter support for perf events" depends on PERF_EVENTS && CPU_HAS_PMU default y help Enable hardware performance counter support for perf events. If disabled, perf events will use software events only. source "drivers/sh/Kconfig" endmenu menu "Boot options" config ZERO_PAGE_OFFSET hex default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \ SH_7751_SOLUTION_ENGINE default "0x00004000" if PAGE_SIZE_16KB || SH_SH03 default "0x00002000" if PAGE_SIZE_8KB default "0x00001000" help This sets the default offset of zero page. config BOOT_LINK_OFFSET hex default "0x00210000" if SH_SHMIN default "0x00400000" if SH_CAYMAN default "0x00810000" if SH_7780_SOLUTION_ENGINE default "0x009e0000" if SH_TITAN default "0x01800000" if SH_SDK7780 default "0x02000000" if SH_EDOSK7760 default "0x00800000" help This option allows you to set the link address offset of the zImage. This can be useful if you are on a board which has a small amount of memory. config ENTRY_OFFSET hex default "0x00001000" if PAGE_SIZE_4KB default "0x00002000" if PAGE_SIZE_8KB default "0x00004000" if PAGE_SIZE_16KB default "0x00010000" if PAGE_SIZE_64KB default "0x00000000" config ROMIMAGE_MMCIF bool "Include MMCIF loader in romImage (EXPERIMENTAL)" depends on CPU_SUBTYPE_SH7724 && EXPERIMENTAL help Say Y here to include experimental MMCIF loading code in romImage. With this enabled it is possible to write the romImage kernel image to an MMC card and boot the kernel straight from the reset vector. At reset the processor Mask ROM will load the first part of the romImage which in turn loads the rest the kernel image to RAM using the MMCIF hardware block. choice prompt "Kernel command line" optional default CMDLINE_OVERWRITE help Setting this option allows the kernel command line arguments to be set. config CMDLINE_OVERWRITE bool "Overwrite bootloader kernel arguments" help Given string will overwrite any arguments passed in by a bootloader. config CMDLINE_EXTEND bool "Extend bootloader kernel arguments" help Given string will be concatenated with arguments passed in by a bootloader. endchoice config CMDLINE string "Kernel command line arguments string" depends on CMDLINE_OVERWRITE || CMDLINE_EXTEND default "console=ttySC1,115200" endmenu menu "Bus options" config SUPERHYWAY tristate "SuperHyway Bus support" depends on CPU_SUBTYPE_SH4_202 config MAPLE bool "Maple Bus support" depends on SH_DREAMCAST help The Maple Bus is SEGA's serial communication bus for peripherals on the Dreamcast. Without this bus support you won't be able to get your Dreamcast keyboard etc to work, so most users probably want to say 'Y' here, unless you are only using the Dreamcast with a serial line terminal or a remote network connection. config PCI bool "PCI support" depends on SYS_SUPPORTS_PCI select PCI_DOMAINS select GENERIC_PCI_IOMAP select NO_GENERIC_PCI_IOPORT_MAP help Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside your box. If you have PCI, say Y, otherwise N. config PCI_DOMAINS bool source "drivers/pci/pcie/Kconfig" source "drivers/pci/Kconfig" source "drivers/pcmcia/Kconfig" source "drivers/pci/hotplug/Kconfig" endmenu menu "Executable file formats" source "fs/Kconfig.binfmt" endmenu menu "Power management options (EXPERIMENTAL)" depends on EXPERIMENTAL source "kernel/power/Kconfig" source "drivers/cpuidle/Kconfig" endmenu source "net/Kconfig" source "drivers/Kconfig" source "fs/Kconfig" source "arch/sh/Kconfig.debug" source "security/Kconfig" source "crypto/Kconfig" source "lib/Kconfig"