# For a description of the syntax of this configuration file, # see Documentation/kbuild/kconfig-language.txt. config TILE def_bool y select HAVE_DMA_ATTRS select HAVE_DMA_API_DEBUG select HAVE_KVM if !TILEGX select GENERIC_FIND_FIRST_BIT select SYSCTL_EXCEPTION_TRACE select USE_GENERIC_SMP_HELPERS select CC_OPTIMIZE_FOR_SIZE select HAVE_DEBUG_KMEMLEAK select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_PROBE select GENERIC_PENDING_IRQ if SMP select GENERIC_IRQ_SHOW select HAVE_DEBUG_BUGVERBOSE select HAVE_SYSCALL_WRAPPERS if TILEGX select SYS_HYPERVISOR select ARCH_HAVE_NMI_SAFE_CMPXCHG select GENERIC_CLOCKEVENTS select MODULES_USE_ELF_RELA select GENERIC_SIGALTSTACK select GENERIC_COMPAT_RT_SIGACTION select GENERIC_COMPAT_RT_SIGQUEUEINFO select GENERIC_COMPAT_RT_SIGPROCMASK select GENERIC_COMPAT_RT_SIGPENDING # FIXME: investigate whether we need/want these options. # select HAVE_IOREMAP_PROT # select HAVE_OPTPROBES # select HAVE_REGS_AND_STACK_ACCESS_API # select HAVE_HW_BREAKPOINT # select PERF_EVENTS # select HAVE_USER_RETURN_NOTIFIER # config NO_BOOTMEM # config ARCH_SUPPORTS_DEBUG_PAGEALLOC # config HUGETLB_PAGE_SIZE_VARIABLE config MMU def_bool y config GENERIC_CSUM def_bool y config SEMAPHORE_SLEEPERS def_bool y config HAVE_ARCH_ALLOC_REMAP def_bool y config HAVE_SETUP_PER_CPU_AREA def_bool y config NEED_PER_CPU_PAGE_FIRST_CHUNK def_bool y config SYS_SUPPORTS_HUGETLBFS def_bool y # Support for additional huge page sizes besides HPAGE_SIZE. # The software support is currently only present in the TILE-Gx # hypervisor. TILEPro in any case does not support page sizes # larger than the default HPAGE_SIZE. config HUGETLB_SUPER_PAGES depends on HUGETLB_PAGE && TILEGX def_bool y # FIXME: tilegx can implement a more efficient rwsem. config RWSEM_GENERIC_SPINLOCK def_bool y # We have a very flat architecture from a migration point of view, # so save boot time by presetting this (particularly useful on tile-sim). config DEFAULT_MIGRATION_COST int default "10000000" # We only support gcc 4.4 and above, so this should work. config ARCH_SUPPORTS_OPTIMIZED_INLINING def_bool y config ARCH_PHYS_ADDR_T_64BIT def_bool y config ARCH_DMA_ADDR_T_64BIT def_bool y config NEED_DMA_MAP_STATE def_bool y config ARCH_HAS_DMA_SET_COHERENT_MASK bool config LOCKDEP_SUPPORT def_bool y config STACKTRACE_SUPPORT def_bool y select STACKTRACE # We use discontigmem for now; at some point we may want to switch # to sparsemem (Tilera bug 7996). config ARCH_DISCONTIGMEM_ENABLE def_bool y config ARCH_DISCONTIGMEM_DEFAULT def_bool y config TRACE_IRQFLAGS_SUPPORT def_bool y config STRICT_DEVMEM def_bool y # SMP is required for Tilera Linux. config SMP def_bool y # Allow checking for compile-time determined overflow errors in # copy_from_user(). There are still unprovable places in the # generic code as of 2.6.34, so this option is not really compatible # with -Werror, which is more useful in general. config DEBUG_COPY_FROM_USER def_bool n config HVC_TILE select HVC_DRIVER def_bool y config TILEGX bool "Building with TILE-Gx (64-bit) compiler and toolchain" config TILEPRO def_bool !TILEGX config 64BIT def_bool TILEGX config ARCH_DEFCONFIG string default "arch/tile/configs/tilepro_defconfig" if !TILEGX default "arch/tile/configs/tilegx_defconfig" if TILEGX source "init/Kconfig" menu "Tilera-specific configuration" config NR_CPUS int "Maximum number of tiles (2-255)" range 2 255 depends on SMP default "64" ---help--- Building with 64 is the recommended value, but a slightly smaller kernel memory footprint results from using a smaller value on chips with fewer tiles. if TILEGX choice prompt "Kernel page size" default PAGE_SIZE_64KB help This lets you select the page size of the kernel. For best performance on memory-intensive applications, a page size of 64KB is recommended. For workloads involving many small files, many connections, etc., it may be better to select 16KB, which uses memory more efficiently at some cost in TLB performance. Note that this option is TILE-Gx specific; currently TILEPro page size is set by rebuilding the hypervisor. config PAGE_SIZE_16KB bool "16KB" config PAGE_SIZE_64KB bool "64KB" endchoice endif source "kernel/Kconfig.hz" config KEXEC bool "kexec system call" ---help--- kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot but it is independent of the system firmware. It is used to implement the "mboot" Tilera booter. The name comes from the similarity to the exec system call. config COMPAT bool "Support 32-bit TILE-Gx binaries in addition to 64-bit" depends on TILEGX select COMPAT_BINFMT_ELF default y ---help--- If enabled, the kernel will support running TILE-Gx binaries that were built with the -m32 option. config SYSVIPC_COMPAT def_bool y depends on COMPAT && SYSVIPC # We do not currently support disabling HIGHMEM on tile64 and tilepro. config HIGHMEM bool # "Support for more than 512 MB of RAM" default !TILEGX ---help--- Linux can use the full amount of RAM in the system by default. However, the address space of TILE processors is only 4 Gigabytes large. That means that, if you have a large amount of physical memory, not all of it can be "permanently mapped" by the kernel. The physical memory that's not permanently mapped is called "high memory". If you are compiling a kernel which will never run on a machine with more than 512 MB total physical RAM, answer "false" here. This will result in the kernel mapping all of physical memory into the top 1 GB of virtual memory space. If unsure, say "true". config ZONE_DMA def_bool y config IOMMU_HELPER bool config NEED_SG_DMA_LENGTH bool config SWIOTLB bool default TILEGX select IOMMU_HELPER select NEED_SG_DMA_LENGTH select ARCH_HAS_DMA_SET_COHERENT_MASK # We do not currently support disabling NUMA. config NUMA bool # "NUMA Memory Allocation and Scheduler Support" depends on SMP && DISCONTIGMEM default y ---help--- NUMA memory allocation is required for TILE processors unless booting with memory striping enabled in the hypervisor, or with only a single memory controller. It is recommended that this option always be enabled. config NODES_SHIFT int "Log base 2 of the max number of memory controllers" default 2 depends on NEED_MULTIPLE_NODES ---help--- By default, 2, i.e. 2^2 == 4 DDR2 controllers. In a system with more controllers, this value should be raised. choice depends on !TILEGX prompt "Memory split" if EXPERT default VMSPLIT_3G ---help--- Select the desired split between kernel and user memory. If the address range available to the kernel is less than the physical memory installed, the remaining memory will be available as "high memory". Accessing high memory is a little more costly than low memory, as it needs to be mapped into the kernel first. Note that increasing the kernel address space limits the range available to user programs, making the address space there tighter. Selecting anything other than the default 3G/1G split will also likely make your kernel incompatible with binary-only kernel modules. If you are not absolutely sure what you are doing, leave this option alone! config VMSPLIT_3_75G bool "3.75G/0.25G user/kernel split (no kernel networking)" config VMSPLIT_3_5G bool "3.5G/0.5G user/kernel split" config VMSPLIT_3G bool "3G/1G user/kernel split" config VMSPLIT_2_75G bool "2.75G/1.25G user/kernel split (for full 1G low memory)" config VMSPLIT_2_5G bool "2.5G/1.5G user/kernel split" config VMSPLIT_2_25G bool "2.25G/1.75G user/kernel split" config VMSPLIT_2G bool "2G/2G user/kernel split" config VMSPLIT_1G bool "1G/3G user/kernel split" endchoice config PAGE_OFFSET hex depends on !64BIT default 0xF0000000 if VMSPLIT_3_75G default 0xE0000000 if VMSPLIT_3_5G default 0xB0000000 if VMSPLIT_2_75G default 0xA0000000 if VMSPLIT_2_5G default 0x90000000 if VMSPLIT_2_25G default 0x80000000 if VMSPLIT_2G default 0x40000000 if VMSPLIT_1G default 0xC0000000 source "mm/Kconfig" config CMDLINE_BOOL bool "Built-in kernel command line" default n ---help--- Allow for specifying boot arguments to the kernel at build time. On some systems (e.g. embedded ones), it is necessary or convenient to provide some or all of the kernel boot arguments with the kernel itself (that is, to not rely on the boot loader to provide them.) To compile command line arguments into the kernel, set this option to 'Y', then fill in the the boot arguments in CONFIG_CMDLINE. Systems with fully functional boot loaders (e.g. mboot, or if booting over PCI) should leave this option set to 'N'. config CMDLINE string "Built-in kernel command string" depends on CMDLINE_BOOL default "" ---help--- Enter arguments here that should be compiled into the kernel image and used at boot time. If the boot loader provides a command line at boot time, it is appended to this string to form the full kernel command line, when the system boots. However, you can use the CONFIG_CMDLINE_OVERRIDE option to change this behavior. In most cases, the command line (whether built-in or provided by the boot loader) should specify the device for the root file system. config CMDLINE_OVERRIDE bool "Built-in command line overrides boot loader arguments" default n depends on CMDLINE_BOOL ---help--- Set this option to 'Y' to have the kernel ignore the boot loader command line, and use ONLY the built-in command line. This is used to work around broken boot loaders. This should be set to 'N' under normal conditions. config VMALLOC_RESERVE hex default 0x1000000 config HARDWALL bool "Hardwall support to allow access to user dynamic network" default y config KERNEL_PL int "Processor protection level for kernel" range 1 2 default "1" ---help--- This setting determines the processor protection level the kernel will be built to run at. Generally you should use the default value here. source "arch/tile/gxio/Kconfig" endmenu # Tilera-specific configuration menu "Bus options" config PCI bool "PCI support" default y select PCI_DOMAINS select GENERIC_PCI_IOMAP select TILE_GXIO_TRIO if TILEGX select ARCH_SUPPORTS_MSI if TILEGX select PCI_MSI if TILEGX ---help--- Enable PCI root complex support, so PCIe endpoint devices can be attached to the Tile chip. Many, but not all, PCI devices are supported under Tilera's root complex driver. config PCI_DOMAINS bool config NO_IOMEM def_bool !PCI config NO_IOPORT def_bool !PCI source "drivers/pci/Kconfig" config TILE_USB tristate "Tilera USB host adapter support" default y depends on USB depends on TILEGX select TILE_GXIO_USB_HOST ---help--- Provides USB host adapter support for the built-in EHCI and OHCI interfaces on TILE-Gx chips. # USB OHCI needs the bounce pool since tilegx will often have more # than 4GB of memory, but we don't currently use the IOTLB to present # a 32-bit address to OHCI. So we need to use a bounce pool instead. config NEED_BOUNCE_POOL def_bool USB_OHCI_HCD source "drivers/pci/hotplug/Kconfig" endmenu menu "Executable file formats" # only elf supported config KCORE_ELF def_bool y depends on PROC_FS source "fs/Kconfig.binfmt" endmenu source "net/Kconfig" source "drivers/Kconfig" source "fs/Kconfig" source "arch/tile/Kconfig.debug" source "security/Kconfig" source "crypto/Kconfig" source "lib/Kconfig" source "arch/tile/kvm/Kconfig"