/* * Support for PCI bridges found on Power Macintoshes. * * Copyright (C) 2003-2005 Benjamin Herrenschmuidt (benh@kernel.crashing.org) * Copyright (C) 1997 Paul Mackerras (paulus@samba.org) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #undef DEBUG #ifdef DEBUG #define DBG(x...) printk(x) #else #define DBG(x...) #endif /* XXX Could be per-controller, but I don't think we risk anything by * assuming we won't have both UniNorth and Bandit */ static int has_uninorth; #ifdef CONFIG_PPC64 static struct pci_controller *u3_agp; static struct pci_controller *u4_pcie; static struct pci_controller *u3_ht; #else static int has_second_ohare; #endif /* CONFIG_PPC64 */ extern int pcibios_assign_bus_offset; struct device_node *k2_skiplist[2]; /* * Magic constants for enabling cache coherency in the bandit/PSX bridge. */ #define BANDIT_DEVID_2 8 #define BANDIT_REVID 3 #define BANDIT_DEVNUM 11 #define BANDIT_MAGIC 0x50 #define BANDIT_COHERENT 0x40 static int __init fixup_one_level_bus_range(struct device_node *node, int higher) { for (; node != 0;node = node->sibling) { const int * bus_range; const unsigned int *class_code; int len; /* For PCI<->PCI bridges or CardBus bridges, we go down */ class_code = of_get_property(node, "class-code", NULL); if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) continue; bus_range = of_get_property(node, "bus-range", &len); if (bus_range != NULL && len > 2 * sizeof(int)) { if (bus_range[1] > higher) higher = bus_range[1]; } higher = fixup_one_level_bus_range(node->child, higher); } return higher; } /* This routine fixes the "bus-range" property of all bridges in the * system since they tend to have their "last" member wrong on macs * * Note that the bus numbers manipulated here are OF bus numbers, they * are not Linux bus numbers. */ static void __init fixup_bus_range(struct device_node *bridge) { int *bus_range, len; struct property *prop; /* Lookup the "bus-range" property for the hose */ prop = of_find_property(bridge, "bus-range", &len); if (prop == NULL || prop->length < 2 * sizeof(int)) return; bus_range = prop->value; bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); } /* * Apple MacRISC (U3, UniNorth, Bandit, Chaos) PCI controllers. * * The "Bandit" version is present in all early PCI PowerMacs, * and up to the first ones using Grackle. Some machines may * have 2 bandit controllers (2 PCI busses). * * "Chaos" is used in some "Bandit"-type machines as a bridge * for the separate display bus. It is accessed the same * way as bandit, but cannot be probed for devices. It therefore * has its own config access functions. * * The "UniNorth" version is present in all Core99 machines * (iBook, G4, new IMacs, and all the recent Apple machines). * It contains 3 controllers in one ASIC. * * The U3 is the bridge used on G5 machines. It contains an * AGP bus which is dealt with the old UniNorth access routines * and a HyperTransport bus which uses its own set of access * functions. */ #define MACRISC_CFA0(devfn, off) \ ((1 << (unsigned int)PCI_SLOT(dev_fn)) \ | (((unsigned int)PCI_FUNC(dev_fn)) << 8) \ | (((unsigned int)(off)) & 0xFCUL)) #define MACRISC_CFA1(bus, devfn, off) \ ((((unsigned int)(bus)) << 16) \ |(((unsigned int)(devfn)) << 8) \ |(((unsigned int)(off)) & 0xFCUL) \ |1UL) static volatile void __iomem *macrisc_cfg_access(struct pci_controller* hose, u8 bus, u8 dev_fn, u8 offset) { unsigned int caddr; if (bus == hose->first_busno) { if (dev_fn < (11 << 3)) return NULL; caddr = MACRISC_CFA0(dev_fn, offset); } else caddr = MACRISC_CFA1(bus, dev_fn, offset); /* Uninorth will return garbage if we don't read back the value ! */ do { out_le32(hose->cfg_addr, caddr); } while (in_le32(hose->cfg_addr) != caddr); offset &= has_uninorth ? 0x07 : 0x03; return hose->cfg_data + offset; } static int macrisc_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { struct pci_controller *hose; volatile void __iomem *addr; hose = pci_bus_to_host(bus); if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; if (offset >= 0x100) return PCIBIOS_BAD_REGISTER_NUMBER; addr = macrisc_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; /* * Note: the caller has already checked that offset is * suitably aligned and that len is 1, 2 or 4. */ switch (len) { case 1: *val = in_8(addr); break; case 2: *val = in_le16(addr); break; default: *val = in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; } static int macrisc_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { struct pci_controller *hose; volatile void __iomem *addr; hose = pci_bus_to_host(bus); if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; if (offset >= 0x100) return PCIBIOS_BAD_REGISTER_NUMBER; addr = macrisc_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; /* * Note: the caller has already checked that offset is * suitably aligned and that len is 1, 2 or 4. */ switch (len) { case 1: out_8(addr, val); break; case 2: out_le16(addr, val); break; default: out_le32(addr, val); break; } return PCIBIOS_SUCCESSFUL; } static struct pci_ops macrisc_pci_ops = { .read = macrisc_read_config, .write = macrisc_write_config, }; #ifdef CONFIG_PPC32 /* * Verify that a specific (bus, dev_fn) exists on chaos */ static int chaos_validate_dev(struct pci_bus *bus, int devfn, int offset) { struct device_node *np; const u32 *vendor, *device; if (offset >= 0x100) return PCIBIOS_BAD_REGISTER_NUMBER; np = pci_busdev_to_OF_node(bus, devfn); if (np == NULL) return PCIBIOS_DEVICE_NOT_FOUND; vendor = of_get_property(np, "vendor-id", NULL); device = of_get_property(np, "device-id", NULL); if (vendor == NULL || device == NULL) return PCIBIOS_DEVICE_NOT_FOUND; if ((*vendor == 0x106b) && (*device == 3) && (offset >= 0x10) && (offset != 0x14) && (offset != 0x18) && (offset <= 0x24)) return PCIBIOS_BAD_REGISTER_NUMBER; return PCIBIOS_SUCCESSFUL; } static int chaos_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { int result = chaos_validate_dev(bus, devfn, offset); if (result == PCIBIOS_BAD_REGISTER_NUMBER) *val = ~0U; if (result != PCIBIOS_SUCCESSFUL) return result; return macrisc_read_config(bus, devfn, offset, len, val); } static int chaos_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { int result = chaos_validate_dev(bus, devfn, offset); if (result != PCIBIOS_SUCCESSFUL) return result; return macrisc_write_config(bus, devfn, offset, len, val); } static struct pci_ops chaos_pci_ops = { .read = chaos_read_config, .write = chaos_write_config, }; static void __init setup_chaos(struct pci_controller *hose, struct resource *addr) { /* assume a `chaos' bridge */ hose->ops = &chaos_pci_ops; hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000); hose->cfg_data = ioremap(addr->start + 0xc00000, 0x1000); } #endif /* CONFIG_PPC32 */ #ifdef CONFIG_PPC64 /* * These versions of U3 HyperTransport config space access ops do not * implement self-view of the HT host yet */ /* * This function deals with some "special cases" devices. * * 0 -> No special case * 1 -> Skip the device but act as if the access was successfull * (return 0xff's on reads, eventually, cache config space * accesses in a later version) * -1 -> Hide the device (unsuccessful acess) */ static int u3_ht_skip_device(struct pci_controller *hose, struct pci_bus *bus, unsigned int devfn) { struct device_node *busdn, *dn; int i; /* We only allow config cycles to devices that are in OF device-tree * as we are apparently having some weird things going on with some * revs of K2 on recent G5s */ if (bus->self) busdn = pci_device_to_OF_node(bus->self); else busdn = hose->dn; for (dn = busdn->child; dn; dn = dn->sibling) if (PCI_DN(dn) && PCI_DN(dn)->devfn == devfn) break; if (dn == NULL) return -1; /* * When a device in K2 is powered down, we die on config * cycle accesses. Fix that here. */ for (i=0; i<2; i++) if (k2_skiplist[i] == dn) return 1; return 0; } #define U3_HT_CFA0(devfn, off) \ ((((unsigned int)devfn) << 8) | offset) #define U3_HT_CFA1(bus, devfn, off) \ (U3_HT_CFA0(devfn, off) \ + (((unsigned int)bus) << 16) \ + 0x01000000UL) static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose, u8 bus, u8 devfn, u8 offset) { if (bus == hose->first_busno) { /* For now, we don't self probe U3 HT bridge */ if (PCI_SLOT(devfn) == 0) return NULL; return hose->cfg_data + U3_HT_CFA0(devfn, offset); } else return hose->cfg_data + U3_HT_CFA1(bus, devfn, offset); } static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { struct pci_controller *hose; volatile void __iomem *addr; hose = pci_bus_to_host(bus); if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; if (offset >= 0x100) return PCIBIOS_BAD_REGISTER_NUMBER; addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; switch (u3_ht_skip_device(hose, bus, devfn)) { case 0: break; case 1: switch (len) { case 1: *val = 0xff; break; case 2: *val = 0xffff; break; default: *val = 0xfffffffful; break; } return PCIBIOS_SUCCESSFUL; default: return PCIBIOS_DEVICE_NOT_FOUND; } /* * Note: the caller has already checked that offset is * suitably aligned and that len is 1, 2 or 4. */ switch (len) { case 1: *val = in_8(addr); break; case 2: *val = in_le16(addr); break; default: *val = in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; } static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { struct pci_controller *hose; volatile void __iomem *addr; hose = pci_bus_to_host(bus); if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; if (offset >= 0x100) return PCIBIOS_BAD_REGISTER_NUMBER; addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; switch (u3_ht_skip_device(hose, bus, devfn)) { case 0: break; case 1: return PCIBIOS_SUCCESSFUL; default: return PCIBIOS_DEVICE_NOT_FOUND; } /* * Note: the caller has already checked that offset is * suitably aligned and that len is 1, 2 or 4. */ switch (len) { case 1: out_8(addr, val); break; case 2: out_le16(addr, val); break; default: out_le32((u32 __iomem *)addr, val); break; } return PCIBIOS_SUCCESSFUL; } static struct pci_ops u3_ht_pci_ops = { .read = u3_ht_read_config, .write = u3_ht_write_config, }; #define U4_PCIE_CFA0(devfn, off) \ ((1 << ((unsigned int)PCI_SLOT(dev_fn))) \ | (((unsigned int)PCI_FUNC(dev_fn)) << 8) \ | ((((unsigned int)(off)) >> 8) << 28) \ | (((unsigned int)(off)) & 0xfcU)) #define U4_PCIE_CFA1(bus, devfn, off) \ ((((unsigned int)(bus)) << 16) \ |(((unsigned int)(devfn)) << 8) \ | ((((unsigned int)(off)) >> 8) << 28) \ |(((unsigned int)(off)) & 0xfcU) \ |1UL) static volatile void __iomem *u4_pcie_cfg_access(struct pci_controller* hose, u8 bus, u8 dev_fn, int offset) { unsigned int caddr; if (bus == hose->first_busno) { caddr = U4_PCIE_CFA0(dev_fn, offset); } else caddr = U4_PCIE_CFA1(bus, dev_fn, offset); /* Uninorth will return garbage if we don't read back the value ! */ do { out_le32(hose->cfg_addr, caddr); } while (in_le32(hose->cfg_addr) != caddr); offset &= 0x03; return hose->cfg_data + offset; } static int u4_pcie_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { struct pci_controller *hose; volatile void __iomem *addr; hose = pci_bus_to_host(bus); if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; if (offset >= 0x1000) return PCIBIOS_BAD_REGISTER_NUMBER; addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; /* * Note: the caller has already checked that offset is * suitably aligned and that len is 1, 2 or 4. */ switch (len) { case 1: *val = in_8(addr); break; case 2: *val = in_le16(addr); break; default: *val = in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; } static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { struct pci_controller *hose; volatile void __iomem *addr; hose = pci_bus_to_host(bus); if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; if (offset >= 0x1000) return PCIBIOS_BAD_REGISTER_NUMBER; addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; /* * Note: the caller has already checked that offset is * suitably aligned and that len is 1, 2 or 4. */ switch (len) { case 1: out_8(addr, val); break; case 2: out_le16(addr, val); break; default: out_le32(addr, val); break; } return PCIBIOS_SUCCESSFUL; } static struct pci_ops u4_pcie_pci_ops = { .read = u4_pcie_read_config, .write = u4_pcie_write_config, }; #endif /* CONFIG_PPC64 */ #ifdef CONFIG_PPC32 /* * For a bandit bridge, turn on cache coherency if necessary. * N.B. we could clean this up using the hose ops directly. */ static void __init init_bandit(struct pci_controller *bp) { unsigned int vendev, magic; int rev; /* read the word at offset 0 in config space for device 11 */ out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + PCI_VENDOR_ID); udelay(2); vendev = in_le32(bp->cfg_data); if (vendev == (PCI_DEVICE_ID_APPLE_BANDIT << 16) + PCI_VENDOR_ID_APPLE) { /* read the revision id */ out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + PCI_REVISION_ID); udelay(2); rev = in_8(bp->cfg_data); if (rev != BANDIT_REVID) printk(KERN_WARNING "Unknown revision %d for bandit\n", rev); } else if (vendev != (BANDIT_DEVID_2 << 16) + PCI_VENDOR_ID_APPLE) { printk(KERN_WARNING "bandit isn't? (%x)\n", vendev); return; } /* read the word at offset 0x50 */ out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + BANDIT_MAGIC); udelay(2); magic = in_le32(bp->cfg_data); if ((magic & BANDIT_COHERENT) != 0) return; magic |= BANDIT_COHERENT; udelay(2); out_le32(bp->cfg_data, magic); printk(KERN_INFO "Cache coherency enabled for bandit/PSX\n"); } /* * Tweak the PCI-PCI bridge chip on the blue & white G3s. */ static void __init init_p2pbridge(void) { struct device_node *p2pbridge; struct pci_controller* hose; u8 bus, devfn; u16 val; /* XXX it would be better here to identify the specific PCI-PCI bridge chip we have. */ p2pbridge = of_find_node_by_name(NULL, "pci-bridge"); if (p2pbridge == NULL || p2pbridge->parent == NULL || strcmp(p2pbridge->parent->name, "pci") != 0) goto done; if (pci_device_from_OF_node(p2pbridge, &bus, &devfn) < 0) { DBG("Can't find PCI infos for PCI<->PCI bridge\n"); goto done; } /* Warning: At this point, we have not yet renumbered all busses. * So we must use OF walking to find out hose */ hose = pci_find_hose_for_OF_device(p2pbridge); if (!hose) { DBG("Can't find hose for PCI<->PCI bridge\n"); goto done; } if (early_read_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, &val) < 0) { printk(KERN_ERR "init_p2pbridge: couldn't read bridge" " control\n"); goto done; } val &= ~PCI_BRIDGE_CTL_MASTER_ABORT; early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val); done: of_node_put(p2pbridge); } static void __init init_second_ohare(void) { struct device_node *np = of_find_node_by_name(NULL, "pci106b,7"); unsigned char bus, devfn; unsigned short cmd; if (np == NULL) return; /* This must run before we initialize the PICs since the second * ohare hosts a PIC that will be accessed there. */ if (pci_device_from_OF_node(np, &bus, &devfn) == 0) { struct pci_controller* hose = pci_find_hose_for_OF_device(np); if (!hose) { printk(KERN_ERR "Can't find PCI hose for OHare2 !\n"); return; } early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd); cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; cmd &= ~PCI_COMMAND_IO; early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd); } has_second_ohare = 1; } /* * Some Apple desktop machines have a NEC PD720100A USB2 controller * on the motherboard. Open Firmware, on these, will disable the * EHCI part of it so it behaves like a pair of OHCI's. This fixup * code re-enables it ;) */ static void __init fixup_nec_usb2(void) { struct device_node *nec; for (nec = NULL; (nec = of_find_node_by_name(nec, "usb")) != NULL;) { struct pci_controller *hose; u32 data; const u32 *prop; u8 bus, devfn; prop = of_get_property(nec, "vendor-id", NULL); if (prop == NULL) continue; if (0x1033 != *prop) continue; prop = of_get_property(nec, "device-id", NULL); if (prop == NULL) continue; if (0x0035 != *prop) continue; prop = of_get_property(nec, "reg", NULL); if (prop == NULL) continue; devfn = (prop[0] >> 8) & 0xff; bus = (prop[0] >> 16) & 0xff; if (PCI_FUNC(devfn) != 0) continue; hose = pci_find_hose_for_OF_device(nec); if (!hose) continue; early_read_config_dword(hose, bus, devfn, 0xe4, &data); if (data & 1UL) { printk("Found NEC PD720100A USB2 chip with disabled" " EHCI, fixing up...\n"); data &= ~1UL; early_write_config_dword(hose, bus, devfn, 0xe4, data); } } } static void __init setup_bandit(struct pci_controller *hose, struct resource *addr) { hose->ops = ¯isc_pci_ops; hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000); hose->cfg_data = ioremap(addr->start + 0xc00000, 0x1000); init_bandit(hose); } static int __init setup_uninorth(struct pci_controller *hose, struct resource *addr) { ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS; has_uninorth = 1; hose->ops = ¯isc_pci_ops; hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000); hose->cfg_data = ioremap(addr->start + 0xc00000, 0x1000); /* We "know" that the bridge at f2000000 has the PCI slots. */ return addr->start == 0xf2000000; } #endif /* CONFIG_PPC32 */ #ifdef CONFIG_PPC64 static void __init setup_u3_agp(struct pci_controller* hose) { /* On G5, we move AGP up to high bus number so we don't need * to reassign bus numbers for HT. If we ever have P2P bridges * on AGP, we'll have to move pci_assign_all_busses to the * pci_controller structure so we enable it for AGP and not for * HT childs. * We hard code the address because of the different size of * the reg address cell, we shall fix that by killing struct * reg_property and using some accessor functions instead */ hose->first_busno = 0xf0; hose->last_busno = 0xff; has_uninorth = 1; hose->ops = ¯isc_pci_ops; hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); u3_agp = hose; } static void __init setup_u4_pcie(struct pci_controller* hose) { /* We currently only implement the "non-atomic" config space, to * be optimised later. */ hose->ops = &u4_pcie_pci_ops; hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); /* The bus contains a bridge from root -> device, we need to * make it visible on bus 0 so that we pick the right type * of config cycles. If we didn't, we would have to force all * config cycles to be type 1. So we override the "bus-range" * property here */ hose->first_busno = 0x00; hose->last_busno = 0xff; u4_pcie = hose; } static void __init setup_u3_ht(struct pci_controller* hose) { struct device_node *np = hose->dn; struct pci_controller *other = NULL; int i, cur; hose->ops = &u3_ht_pci_ops; /* We hard code the address because of the different size of * the reg address cell, we shall fix that by killing struct * reg_property and using some accessor functions instead */ hose->cfg_data = ioremap(0xf2000000, 0x02000000); /* * /ht node doesn't expose a "ranges" property, so we "remove" * regions that have been allocated to AGP. So far, this version of * the code doesn't assign any of the 0xfxxxxxxx "fine" memory regions * to /ht. We need to fix that sooner or later by either parsing all * child "ranges" properties or figuring out the U3 address space * decoding logic and then read its configuration register (if any). */ hose->io_base_phys = 0xf4000000; hose->pci_io_size = 0x00400000; hose->io_resource.name = np->full_name; hose->io_resource.start = 0; hose->io_resource.end = 0x003fffff; hose->io_resource.flags = IORESOURCE_IO; hose->pci_mem_offset = 0; hose->first_busno = 0; hose->last_busno = 0xef; hose->mem_resources[0].name = np->full_name; hose->mem_resources[0].start = 0x80000000; hose->mem_resources[0].end = 0xefffffff; hose->mem_resources[0].flags = IORESOURCE_MEM; u3_ht = hose; if (u3_agp != NULL) other = u3_agp; else if (u4_pcie != NULL) other = u4_pcie; if (other == NULL) { DBG("U3/4 has no AGP/PCIE, using full resource range\n"); return; } /* Fixup bus range vs. PCIE */ if (u4_pcie) hose->last_busno = u4_pcie->first_busno - 1; /* We "remove" the AGP resources from the resources allocated to HT, * that is we create "holes". However, that code does assumptions * that so far happen to be true (cross fingers...), typically that * resources in the AGP node are properly ordered */ cur = 0; for (i=0; i<3; i++) { struct resource *res = &other->mem_resources[i]; if (res->flags != IORESOURCE_MEM) continue; /* We don't care about "fine" resources */ if (res->start >= 0xf0000000) continue; /* Check if it's just a matter of "shrinking" us in one * direction */ if (hose->mem_resources[cur].start == res->start) { DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n", cur, hose->mem_resources[cur].start, res->end + 1); hose->mem_resources[cur].start = res->end + 1; continue; } if (hose->mem_resources[cur].end == res->end) { DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n", cur, hose->mem_resources[cur].end, res->start - 1); hose->mem_resources[cur].end = res->start - 1; continue; } /* No, it's not the case, we need a hole */ if (cur == 2) { /* not enough resources for a hole, we drop part * of the range */ printk(KERN_WARNING "Running out of resources" " for /ht host !\n"); hose->mem_resources[cur].end = res->start - 1; continue; } cur++; DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n", cur-1, res->start - 1, cur, res->end + 1); hose->mem_resources[cur].name = np->full_name; hose->mem_resources[cur].flags = IORESOURCE_MEM; hose->mem_resources[cur].start = res->end + 1; hose->mem_resources[cur].end = hose->mem_resources[cur-1].end; hose->mem_resources[cur-1].end = res->start - 1; } } #endif /* CONFIG_PPC64 */ /* * We assume that if we have a G3 powermac, we have one bridge called * "pci" (a MPC106) and no bandit or chaos bridges, and contrariwise, * if we have one or more bandit or chaos bridges, we don't have a MPC106. */ static int __init pmac_add_bridge(struct device_node *dev) { int len; struct pci_controller *hose; struct resource rsrc; char *disp_name; const int *bus_range; int primary = 1, has_address = 0; DBG("Adding PCI host bridge %s\n", dev->full_name); /* Fetch host bridge registers address */ has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); /* Get bus range if any */ bus_range = of_get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { printk(KERN_WARNING "Can't get bus-range for %s, assume" " bus 0\n", dev->full_name); } hose = pcibios_alloc_controller(dev); if (!hose) return -ENOMEM; hose->first_busno = bus_range ? bus_range[0] : 0; hose->last_busno = bus_range ? bus_range[1] : 0xff; disp_name = NULL; /* 64 bits only bridges */ #ifdef CONFIG_PPC64 if (of_device_is_compatible(dev, "u3-agp")) { setup_u3_agp(hose); disp_name = "U3-AGP"; primary = 0; } else if (of_device_is_compatible(dev, "u3-ht")) { setup_u3_ht(hose); disp_name = "U3-HT"; primary = 1; } else if (of_device_is_compatible(dev, "u4-pcie")) { setup_u4_pcie(hose); disp_name = "U4-PCIE"; primary = 0; } printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number:" " %d->%d\n", disp_name, hose->first_busno, hose->last_busno); #endif /* CONFIG_PPC64 */ /* 32 bits only bridges */ #ifdef CONFIG_PPC32 if (of_device_is_compatible(dev, "uni-north")) { primary = setup_uninorth(hose, &rsrc); disp_name = "UniNorth"; } else if (strcmp(dev->name, "pci") == 0) { /* XXX assume this is a mpc106 (grackle) */ setup_grackle(hose); disp_name = "Grackle (MPC106)"; } else if (strcmp(dev->name, "bandit") == 0) { setup_bandit(hose, &rsrc); disp_name = "Bandit"; } else if (strcmp(dev->name, "chaos") == 0) { setup_chaos(hose, &rsrc); disp_name = "Chaos"; primary = 0; } printk(KERN_INFO "Found %s PCI host bridge at 0x%016llx. " "Firmware bus number: %d->%d\n", disp_name, (unsigned long long)rsrc.start, hose->first_busno, hose->last_busno); #endif /* CONFIG_PPC32 */ DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", hose, hose->cfg_addr, hose->cfg_data); /* Interpret the "ranges" property */ /* This also maps the I/O region and sets isa_io/mem_base */ pci_process_bridge_OF_ranges(hose, dev, primary); /* Fixup "bus-range" OF property */ fixup_bus_range(dev); return 0; } void __devinit pmac_pci_irq_fixup(struct pci_dev *dev) { #ifdef CONFIG_PPC32 /* Fixup interrupt for the modem/ethernet combo controller. * on machines with a second ohare chip. * The number in the device tree (27) is bogus (correct for * the ethernet-only board but not the combo ethernet/modem * board). The real interrupt is 28 on the second controller * -> 28+32 = 60. */ if (has_second_ohare && dev->vendor == PCI_VENDOR_ID_DEC && dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS) { dev->irq = irq_create_mapping(NULL, 60); set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW); } #endif /* CONFIG_PPC32 */ } void __init pmac_pci_init(void) { struct device_node *np, *root; struct device_node *ht = NULL; ppc_pci_flags = PPC_PCI_CAN_SKIP_ISA_ALIGN; root = of_find_node_by_path("/"); if (root == NULL) { printk(KERN_CRIT "pmac_pci_init: can't find root " "of device tree\n"); return; } for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { if (np->name == NULL) continue; if (strcmp(np->name, "bandit") == 0 || strcmp(np->name, "chaos") == 0 || strcmp(np->name, "pci") == 0) { if (pmac_add_bridge(np) == 0) of_node_get(np); } if (strcmp(np->name, "ht") == 0) { of_node_get(np); ht = np; } } of_node_put(root); #ifdef CONFIG_PPC64 /* Probe HT last as it relies on the agp resources to be already * setup */ if (ht && pmac_add_bridge(ht) != 0) of_node_put(ht); /* Setup the linkage between OF nodes and PHBs */ pci_devs_phb_init(); /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We * assume there is no P2P bridge on the AGP bus, which should be a * safe assumptions for now. We should do something better in the * future though */ if (u3_agp) { struct device_node *np = u3_agp->dn; PCI_DN(np)->busno = 0xf0; for (np = np->child; np; np = np->sibling) PCI_DN(np)->busno = 0xf0; } /* pmac_check_ht_link(); */ /* Tell pci.c to not use the common resource allocation mechanism */ pci_probe_only = 1; #else /* CONFIG_PPC64 */ init_p2pbridge(); init_second_ohare(); fixup_nec_usb2(); /* We are still having some issues with the Xserve G4, enabling * some offset between bus number and domains for now when we * assign all busses should help for now */ if (ppc_pci_flags & PPC_PCI_REASSIGN_ALL_BUS) pcibios_assign_bus_offset = 0x10; #endif } int pmac_pci_enable_device_hook(struct pci_dev *dev) { struct device_node* node; int updatecfg = 0; int uninorth_child; node = pci_device_to_OF_node(dev); /* We don't want to enable USB controllers absent from the OF tree * (iBook second controller) */ if (dev->vendor == PCI_VENDOR_ID_APPLE && dev->class == PCI_CLASS_SERIAL_USB_OHCI && !node) { printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n", pci_name(dev)); return -EINVAL; } if (!node) return 0; uninorth_child = node->parent && of_device_is_compatible(node->parent, "uni-north"); /* Firewire & GMAC were disabled after PCI probe, the driver is * claiming them, we must re-enable them now. */ if (uninorth_child && !strcmp(node->name, "firewire") && (of_device_is_compatible(node, "pci106b,18") || of_device_is_compatible(node, "pci106b,30") || of_device_is_compatible(node, "pci11c1,5811"))) { pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, node, 0, 1); pmac_call_feature(PMAC_FTR_1394_ENABLE, node, 0, 1); updatecfg = 1; } if (uninorth_child && !strcmp(node->name, "ethernet") && of_device_is_compatible(node, "gmac")) { pmac_call_feature(PMAC_FTR_GMAC_ENABLE, node, 0, 1); updatecfg = 1; } /* * Fixup various header fields on 32 bits. We don't do that on * 64 bits as some of these have strange values behind the HT * bridge and we must not, for example, enable MWI or set the * cache line size on them. */ #ifdef CONFIG_PPC32 if (updatecfg) { u16 cmd; pci_read_config_word(dev, PCI_COMMAND, &cmd); cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE; pci_write_config_word(dev, PCI_COMMAND, cmd); pci_write_config_byte(dev, PCI_LATENCY_TIMER, 16); pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, L1_CACHE_BYTES >> 2); #endif } return 0; } /* We power down some devices after they have been probed. They'll * be powered back on later on */ void __init pmac_pcibios_after_init(void) { struct device_node* nd; #ifdef CONFIG_BLK_DEV_IDE struct pci_dev *dev = NULL; /* OF fails to initialize IDE controllers on macs * (and maybe other machines) * * Ideally, this should be moved to the IDE layer, but we need * to check specifically with Andre Hedrick how to do it cleanly * since the common IDE code seem to care about the fact that the * BIOS may have disabled a controller. * * -- BenH */ for_each_pci_dev(dev) { if ((dev->class >> 16) != PCI_BASE_CLASS_STORAGE) continue; if (pci_enable_device(dev)) printk(KERN_WARNING "pci: Failed to enable %s\n", pci_name(dev)); } #endif /* CONFIG_BLK_DEV_IDE */ for_each_node_by_name(nd, "firewire") { if (nd->parent && (of_device_is_compatible(nd, "pci106b,18") || of_device_is_compatible(nd, "pci106b,30") || of_device_is_compatible(nd, "pci11c1,5811")) && of_device_is_compatible(nd->parent, "uni-north")) { pmac_call_feature(PMAC_FTR_1394_ENABLE, nd, 0, 0); pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0); } } of_node_put(nd); for_each_node_by_name(nd, "ethernet") { if (nd->parent && of_device_is_compatible(nd, "gmac") && of_device_is_compatible(nd->parent, "uni-north")) pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0); } of_node_put(nd); } #ifdef CONFIG_PPC32 void pmac_pci_fixup_cardbus(struct pci_dev* dev) { if (!machine_is(powermac)) return; /* * Fix the interrupt routing on the various cardbus bridges * used on powerbooks */ if (dev->vendor != PCI_VENDOR_ID_TI) return; if (dev->device == PCI_DEVICE_ID_TI_1130 || dev->device == PCI_DEVICE_ID_TI_1131) { u8 val; /* Enable PCI interrupt */ if (pci_read_config_byte(dev, 0x91, &val) == 0) pci_write_config_byte(dev, 0x91, val | 0x30); /* Disable ISA interrupt mode */ if (pci_read_config_byte(dev, 0x92, &val) == 0) pci_write_config_byte(dev, 0x92, val & ~0x06); } if (dev->device == PCI_DEVICE_ID_TI_1210 || dev->device == PCI_DEVICE_ID_TI_1211 || dev->device == PCI_DEVICE_ID_TI_1410 || dev->device == PCI_DEVICE_ID_TI_1510) { u8 val; /* 0x8c == TI122X_IRQMUX, 2 says to route the INTA signal out the MFUNC0 pin */ if (pci_read_config_byte(dev, 0x8c, &val) == 0) pci_write_config_byte(dev, 0x8c, (val & ~0x0f) | 2); /* Disable ISA interrupt mode */ if (pci_read_config_byte(dev, 0x92, &val) == 0) pci_write_config_byte(dev, 0x92, val & ~0x06); } } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_ANY_ID, pmac_pci_fixup_cardbus); void pmac_pci_fixup_pciata(struct pci_dev* dev) { u8 progif = 0; /* * On PowerMacs, we try to switch any PCI ATA controller to * fully native mode */ if (!machine_is(powermac)) return; /* Some controllers don't have the class IDE */ if (dev->vendor == PCI_VENDOR_ID_PROMISE) switch(dev->device) { case PCI_DEVICE_ID_PROMISE_20246: case PCI_DEVICE_ID_PROMISE_20262: case PCI_DEVICE_ID_PROMISE_20263: case PCI_DEVICE_ID_PROMISE_20265: case PCI_DEVICE_ID_PROMISE_20267: case PCI_DEVICE_ID_PROMISE_20268: case PCI_DEVICE_ID_PROMISE_20269: case PCI_DEVICE_ID_PROMISE_20270: case PCI_DEVICE_ID_PROMISE_20271: case PCI_DEVICE_ID_PROMISE_20275: case PCI_DEVICE_ID_PROMISE_20276: case PCI_DEVICE_ID_PROMISE_20277: goto good; } /* Others, check PCI class */ if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) return; good: pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); if ((progif & 5) != 5) { printk(KERN_INFO "PCI: %s Forcing PCI IDE into native mode\n", pci_name(dev)); (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5); if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) || (progif & 5) != 5) printk(KERN_ERR "Rewrite of PROGIF failed !\n"); else { /* Clear IO BARs, they will be reassigned */ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0); pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0); pci_write_config_dword(dev, PCI_BASE_ADDRESS_2, 0); pci_write_config_dword(dev, PCI_BASE_ADDRESS_3, 0); } } } DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, pmac_pci_fixup_pciata); #endif /* * Disable second function on K2-SATA, it's broken * and disable IO BARs on first one */ static void fixup_k2_sata(struct pci_dev* dev) { int i; u16 cmd; if (PCI_FUNC(dev->devfn) > 0) { pci_read_config_word(dev, PCI_COMMAND, &cmd); cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY); pci_write_config_word(dev, PCI_COMMAND, cmd); for (i = 0; i < 6; i++) { dev->resource[i].start = dev->resource[i].end = 0; dev->resource[i].flags = 0; pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0); } } else { pci_read_config_word(dev, PCI_COMMAND, &cmd); cmd &= ~PCI_COMMAND_IO; pci_write_config_word(dev, PCI_COMMAND, cmd); for (i = 0; i < 5; i++) { dev->resource[i].start = dev->resource[i].end = 0; dev->resource[i].flags = 0; pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0); } } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, fixup_k2_sata);