# Copyright 2007 Simtec Electronics # # Licensed under GPLv2 config CPU_S3C2440 bool select CPU_ARM920T select S3C_GPIO_PULL_UP select S3C2410_CLOCK select S3C2410_PM if PM select S3C2410_GPIO select S3C2440_DMA if S3C2410_DMA select CPU_S3C244X select CPU_LLSERIAL_S3C2440 help Support for S3C2440 Samsung Mobile CPU based systems. config CPU_S3C2442 bool select CPU_ARM920T select S3C2410_CLOCK select S3C2410_GPIO select S3C2410_PM if PM select CPU_S3C244X select CPU_LLSERIAL_S3C2440 help Support for S3C2442 Samsung Mobile CPU based systems. config CPU_S3C244X bool depends on CPU_S3C2440 || CPU_S3C2442 help Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems. config S3C2440_CPUFREQ bool "S3C2440/S3C2442 CPU Frequency scaling support" depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442) select S3C2410_CPUFREQ_UTILS default y help CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. config S3C2440_XTAL_12000000 bool help Indicate that the build needs to support 12MHz system crystal. config S3C2440_XTAL_16934400 bool help Indicate that the build needs to support 16.9344MHz system crystal. config S3C2440_PLL_12000000 bool depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000 default y if CPU_FREQ_S3C24XX_PLL help PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals. config S3C2440_PLL_16934400 bool depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400 default y if CPU_FREQ_S3C24XX_PLL help PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. config S3C2440_DMA bool depends on CPU_S3C2440 help Support for S3C2440 specific DMA code5A menu "S3C2440 and S3C2442 Machines" config MACH_ANUBIS bool "Simtec Electronics ANUBIS" select CPU_S3C2440 select S3C24XX_DCLK select PM_SIMTEC if PM select HAVE_PATA_PLATFORM select S3C24XX_GPIO_EXTRA64 select S3C2440_XTAL_12000000 select S3C_DEV_USB_HOST help Say Y here if you are using the Simtec Electronics ANUBIS development system config MACH_NEO1973_GTA02 bool "Openmoko GTA02 / Freerunner phone" select CPU_S3C2442 select MFD_PCF50633 select PCF50633_GPIO select I2C select POWER_SUPPLY select MACH_NEO1973 select S3C2410_PWM help Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" select CPU_S3C2440 select S3C24XX_DCLK select PM_SIMTEC if PM select S3C24XX_GPIO_EXTRA128 select S3C2440_XTAL_12000000 select S3C2410_IOTIMING if S3C2440_CPUFREQ select S3C_DEV_USB_HOST select S3C_DEV_NAND help Say Y here if you are using the Simtec IM2440D20 module, also known as the Osiris. config MACH_OSIRIS_DVS tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" depends on MACH_OSIRIS select TPS65010 help Say Y/M here if you want to have dynamic voltage scaling support on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. The DVS driver alters the voltage supplied to the ARM core depending on the frequency it is running at. The driver itself does not do any of the frequency alteration, which is left up to the cpufreq driver. config MACH_RX3715 bool "HP iPAQ rx3715" select CPU_S3C2440 select S3C2440_XTAL_16934400 select PM_H1940 if PM select S3C_DEV_NAND help Say Y here if you are using the HP iPAQ rx3715. config ARCH_S3C2440 bool "SMDK2440" select CPU_S3C2440 select S3C2440_XTAL_16934400 select MACH_SMDK select S3C_DEV_USB_HOST select S3C_DEV_NAND help Say Y here if you are using the SMDK2440. config MACH_NEXCODER_2440 bool "NexVision NEXCODER 2440 Light Board" select CPU_S3C2440 select S3C2440_XTAL_12000000 select S3C_DEV_USB_HOST select S3C_DEV_NAND help Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board config SMDK2440_CPU2440 bool "SMDK2440 with S3C2440 CPU module" default y if ARCH_S3C2440 select S3C2440_XTAL_16934400 select CPU_S3C2440 config SMDK2440_CPU2442 bool "SMDM2440 with S3C2442 CPU module" select CPU_S3C2442 config MACH_AT2440EVB bool "Avantech AT2440EVB development board" select CPU_S3C2440 select S3C_DEV_USB_HOST select S3C_DEV_NAND help Say Y here if you are using the AT2440EVB development board config MACH_MINI2440 bool "MINI2440 development board" select CPU_S3C2440 select EEPROM_AT24 select NEW_LEDS select LEDS_CLASS select LEDS_TRIGGER select LEDS_TRIGGER_BACKLIGHT select S3C_DEV_NAND select S3C_DEV_USB_HOST help Say Y here to select support for the MINI2440. Is a 10cm x 10cm board available via various sources. It can come with a 3.5" or 7" touch LCD. config MACH_RX1950 bool "HP iPAQ rx1950" select CPU_S3C2442 select S3C24XX_DCLK select PM_H1940 if PM select I2C select S3C2410_PWM select S3C_DEV_NAND select S3C2410_IOTIMING if S3C2440_CPUFREQ select S3C2440_XTAL_16934400 help Say Y here if you're using HP iPAQ rx1950 endmenu