This patch fixes a compile failure in 2.6.26-rc5-git5.

The variable is expected to be called ofdev.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'core/iter-div' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  always_inline timespec_add_ns
  add an inlined version of iter_div_u64_rem
  common implementation of iterative div/mod

timespec_add_ns is used from the x86-64 vdso, which cannot call out to
other kernel code.  Make sure that timespec_add_ns is always inlined
(and only uses always_inlined functions) to make sure there are no
unexpected calls.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

iter_div_u64_rem is used in the x86-64 vdso, which cannot call other
kernel code.  For this case, provide the always_inlined version,
__iter_div_u64_rem.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We have a few instances of the open-coded iterative div/mod loop, used
when we don't expcet the dividend to be much bigger than the divisor.
Unfortunately modern gcc's have the tendency to strength "reduce" this
into a full mod operation, which isn't necessarily any faster, and
even if it were, doesn't exist if gcc implements it in libgcc.

The workaround is to put a dummy asm statement in the loop to prevent
gcc from performing the transformation.

This patch creates a single implementation of this loop, and uses it
to replace the open-coded versions I know about.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Cc: Christian Kujau <lists@nerdbynature.de>
Cc: Robert Hancock <hancockr@shaw.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: don't use reset-resume if drivers don't support it
  USB: isp1760: Assign resource fields before adding hcd
  isight_firmware: Avoid crash on loading invalid firmware
  USB: fix build bug in USB_ISIGHTFW

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  kobject: Documentation Spelling Patch
  dev_set_name: fix missing kernel-doc

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (23 commits)
  ACPICA: fix stray va_end() caused by mis-merge
  ACPI: Reject below-freezing temperatures as invalid critical temperatures
  ACPICA: Fix for access to deleted object <regression>
  ACPICA: Fix to make _SST method optional
  ACPICA: Fix for Load operator, load table at the namespace root
  ACPICA: Ignore ACPI table signature for Load() operator
  ACPICA: Fix to allow zero-length ASL field declarations
  ACPI: use memory_read_from_buffer()
  bay: exit if notify handler cannot be installed
  dock.c remove trailing printk whitespace
  proper prototype for acpi_processor_tstate_has_changed()
  ACPI: handle invalid ACPI SLIT table
  PNPACPI: use _CRS IRQ descriptor length for _SRS
  pnpacpi: fix shareable IRQ encode/decode
  pnpacpi: fix IRQ flag decoding
  MAINTAINERS: update ACPI homepage
  ACPI 2.6.26-rc2: Add missing newline to DSDT/SSDT warning message
  ACPI: EC: Use msleep instead of udelay while waiting for event.
  thinkpad-acpi: fix LED handling on older ThinkPads
  thinkpad-acpi: fix initialization error paths
  ...

This patch tries to identify which devices are able to accept
reset-resume handling, by checking that there is at least one
interface driver bound and that all of the drivers have a reset_resume
method defined.  If these conditions don't hold then during resume
processing, the device is logicall disconnected.

This is only a temporary fix.  Later on we will explicitly unbind
drivers that can't handle reset-resumes.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Pavel Machek <pavel@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This fixes the bogus "io mem 0x00000000" message printed
during driver init due to hcd->rsrc_start being assigned after
the call to usb_add_hcd().
Signed-off-by: NNate Case <ncase@xes-inc.com>
Acked-by: NSebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Different tools generate slightly different formats of the isight
firmware. Ensure that the firmware buffer is not overrun, while still
ensuring that the correct amount of data is written if trailing data is
present.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Report-by: NJustin Mattock <justinmattock@gmail.com>
Tested-by: NJustin Mattock <justinmattock@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

USB: fix build bug in USB_ISIGHTFW

-tip tree testing found this build bug:

  drivers/built-in.o: In function `isight_firmware_load':
  isight_firmware.c:(.text+0x1ade08): undefined reference to `request_firmware'
  isight_firmware.c:(.text+0x1adf9c): undefined reference to `release_firmware'

select FW_LOADER in USB_ISIGHTFW.


From: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NDavid Brigada <brigad@rpi.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix kernel-doc for new dev_set_name() function:

Warning(lin2626-rc5//drivers/base/core.c:767): No description found for parameter 'fmt'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NLen Brown <len.brown@intel.com>

My laptop thinks that it's a good idea to give -73C as the critical
CPU temperature.... which isn't the best thing since it causes a shutdown
right at bootup.

Temperatures below freezing are clearly invalid critical thresholds
so just reject these as such.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Fixes problem introduced in 20080123, with fix for Unload operator.
Parse tree object can be already deleted; must use the opcode
within the WalkState.

ACPI: kmemcheck: Caught 16-bit read from freed memory
http://bugzilla.kernel.org/show_bug.cgi?id=10669Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Fixes a problem introduced in 20080514 where the status of
execution of _SST is incorrectly returned to the caller. _SST
is optional, and if it is AE_NOT_FOUND, the exception should be
ignored.

http://www.acpica.org/bugzilla/show_bug.cgi?id=716Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

This reverts a change introduced in version 20071019. The table
is now loaded at the namespace root even though this goes against
the ACPI specification.  This provides compatibility with other
ACPI implementations.
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Only "SSDT" is acceptable to the ACPI spec, but tables are
seen with OEMx and null sigs. Therefore, signature validation
is worthless.  Apparently MS ACPI accepts such signatures, ACPICA
must be compatible.

http://bugzilla.kernel.org/show_bug.cgi?id=10454Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Allows null field list in Field(), BankField(), and IndexField().

2.6.26-rc1 regression: ACPI fails to load SDT. - Dell M1530
http://bugzilla.kernel.org/show_bug.cgi?id=10606Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

If acpi_install_notify_handler() for a bay device fails, the bay driver is
superfluous.  Most likely, another driver (like libata) is already caring
about this device anyway.  Furthermore,
register_hotplug_dock_device(acpi_handle) from the dock driver must not be
called twice with the same handler.  This would result in an endless loop
consuming 100% of CPU.  So clean up and exit.
Signed-off-by: NHolger Macht <hmacht@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NTim Pepper <lnxninja@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch adds a proper prototype for acpi_processor_tstate_has_changed()
in include/acpi/processor.h
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

This is a SLIT sanity checking patch.  It moves slit_valid() function to
generic ACPI code and does sanity checking for both x86 and ia64.  It sets up
node_distance with LOCAL_DISTANCE and REMOTE_DISTANCE when hitting invalid
SLIT table on ia64.  It also cleans up unused variable localities in
acpi_parse_slit() on x86.
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

When configuring the resources of an ACPI device, we first evaluate _CRS
to get a template of resource descriptors, then fill in the specific
resource values we want, and finally evaluate _SRS to actually configure
the device.

Some resources have optional fields, so the size of encoded descriptors
varies depending on the specific values.  For example, IRQ descriptors can
be either two or three bytes long.  The third byte contains triggering
information and can be omitted if the IRQ is edge-triggered and active
high.

The BIOS often assumes that IRQ descriptors in the _SRS buffer use the
same format as those in the _CRS buffer, so this patch enforces that
constraint.

The "Start Dependent Function" descriptor also has an optional byte, but
we don't currently encode those descriptors, so I didn't do anything for
those.

I have tested this patch on a Toshiba Portege 4000.  Without the patch,
parport_pc claims the parallel port only if I use "pnpacpi=off".  This
patch makes it work with PNPACPI.

This is an extension of a patch by Tom Jaeger:
    http://bugzilla.kernel.org/show_bug.cgi?id=9487#c42

References:
    http://bugzilla.kernel.org/show_bug.cgi?id=5832 Enabling ACPI Plug and Play in kernels >2.6.9 kills Parallel support
    http://bugzilla.kernel.org/show_bug.cgi?id=9487 buggy firmware expects four-byte IRQ resource descriptor (was: Serial port disappears after Suspend on Toshiba R25)
    http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=1d5b285da1893b90507b081664ac27f1a8a3dc5b related ACPICA fix
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

When we encode IRQ resources, we should use the "shareable" flag we got
from _PRS rather than guessing based on the IRQ trigger mode.

This is based on a patch by Tom Jaeger:
    http://bugzilla.kernel.org/show_bug.cgi?id=9487#c32Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

When decoding IRQ trigger mode and polarity, it is not enough to mask by
IORESOURCE_BITS because there are now additional bits defined.  For
example, if IORESOURCE_IRQ_SHAREABLE was set, we failed to set *triggering
and *polarity at all.

I can't point to a failure that this patch fixes, but
bugs in this area have caused problems when resuming after
suspend, for example:

    http://bugzilla.kernel.org/show_bug.cgi?id=6316
    http://bugzilla.kernel.org/show_bug.cgi?id=9487
    https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/152187

This is based on a patch by Tom Jaeger:
    http://bugzilla.kernel.org/show_bug.cgi?id=9487#c32

[rene.herman@keyaccess.nl: fix comment]
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch updates the location of the ACPI homepage in MAINTAINERS.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

As of recently (probably 2.6.26-rc1) I've been getting the following mangling
in the kernel log:

[4294014.568167] ACPI: DSDT override uses original SSDTs unless "acpi_no_auto_ssdt"<6>CPU0: Intel(R) Pentium(R) Dual  CPU  E2160  @ 1.80GHz stepping 0d

This is due to a missing newline character in the first message. The following
patch against 2.6.26-rc2 fixes it. Please apply.
Signed-off-by: NAlistair John Strachan <alistair@devzero.co.uk>
Signed-off-by: NLen Brown <len.brown@intel.com>

http://bugzilla.kernel.org/show_bug.cgi?id=10724Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

The less tested codepaths for LED handling, used on ThinkPads 570, 600e/x,
770e, 770x, A21e, A2xm/p, T20-22, X20 and maybe a few others, would write
data to kernel memory it had no business touching, for leds number 3 and
above.  If one is lucky, that illegal write would cause an OOPS, but
chances are it would silently corrupt a byte.

The problem was introduced in commit af116101, "ACPI: thinkpad-acpi: add
sysfs led class support to thinkpad leds (v3.2)".

Fix the bug by refactoring the entire code to be far more obvious on what
it wants to do.  Also do some defensive "constification".

Issue reported by Karol Lewandowski <lmctlx@gmail.com> (he's an lucky guy
and got an OOPS instead of silent corruption :-) ).

Root cause of the OOPS identified by Adrian Bunk <bunk@kernel.org>.
Thanks, Adrian!
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Tested-by: NKarol Lewandowski <lmctlx@gmail.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Rework some subdriver init and exit handlers, in order to fix some
initialization error paths that were missing, or broken.

Hitting those bugs should be extremely rare in the real world, but should
that happen, thinkpad-acpi would fail to dealocate some resources and a
reboot might well be needed to be able to load the driver again.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NLen Brown <len.brown@intel.com>

Rename SW_RADIO to SW_RFKILL_ALL in thinkpad-acpi code and docs, following
5adad013 "Input: rename SW_RADIO to
SW_RFKILL_ALL".
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NLen Brown <len.brown@intel.com>

cpuidle and acpi driver interaction bug with the way cpuidle_register_driver()
is called. Due to this bug, there will be oops on
AC<->DC on some systems, where they support C-states in one DC and not in AC.

The current code does
ON BOOT:
	Look at CST and other C-state info to see whether more than C1 is
	supported. If it is, then acpi processor_idle does a
	cpuidle_register_driver() call, which internally enables the device.

ON CST change notification (AC<->DC) and on suspend-resume:
	acpi driver temporarily disables device, updates the device with
	any new C-states, and reenables the device.

The problem is is on boot, there are no C2, C3 states supported and we skip
the register. Later on AC<->DC, we may get a CST notification and we try
to reevaluate CST and enabled the device, without actually registering it.
This causes breakage as we try to create /sys fs sub directory, without the
parent directory which is created at register time.

Thanks to Sanjeev for reporting the problem here.
http://bugzilla.kernel.org/show_bug.cgi?id=10394Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The Fixed_RTC event should be disabled when installing RTC handler.
Only when RTC alarm is set will it be enabled again. If it is not
disabled, maybe some machines will be powered on automatically after
the system is shutdown even when the RTC alarm is not set.

http://bugzilla.kernel.org/show_bug.cgi?id=10010Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

* 'kvm-updates-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
  KVM: MMU: Fix is_empty_shadow_page() check
  KVM: MMU: Fix printk() format string
  KVM: IOAPIC: only set remote_irr if interrupt was injected
  KVM: MMU: reschedule during shadow teardown
  KVM: VMX: Clear CR4.VMXE in hardware_disable
  KVM: migrate PIT timer
  KVM: ppc: Report bad GFNs
  KVM: ppc: Use a read lock around MMU operations, and release it on error
  KVM: ppc: Remove unmatched kunmap() call
  KVM: ppc: add lwzx/stwz emulation
  KVM: ppc: Remove duplicate function
  KVM: s390: Fix race condition in kvm_s390_handle_wait
  KVM: s390: Send program check on access error
  KVM: s390: fix interrupt delivery
  KVM: s390: handle machine checks when guest is running
  KVM: s390: fix locking order problem in enable_sie
  KVM: s390: use yield instead of schedule to implement diag 0x44
  KVM: x86 emulator: fix hypercall return value on AMD
  KVM: ia64: fix zero extending for mmio ld1/2/4 emulation in KVM

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] cifs: fix oops on mount when CONFIG_CIFS_DFS_UPCALL is enabled
  [CIFS] Fix hang in mount when negprot causes server to kill tcp session
  disable most mode changes on non-unix/non-cifsacl mounts
  [CIFS] Correct incorrect obscure open flag
  [CIFS] warn if both dynperm and cifsacl mount options specified
  silently ignore ownership changes unless unix extensions are enabled or we're faking uid changes
  [CIFS] remove trailing whitespace
  when creating new inodes, use file_mode/dir_mode exclusively on mount without unix extensions
  on non-posix shares, clear write bits in mode when ATTR_READONLY is set
  [CIFS] remove unused variables

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits)
  net: Fix routing tables with id > 255 for legacy software
  sky2: Hold RTNL while calling dev_close()
  s2io iomem annotations
  atl1: fix suspend regression
  qeth: start dev queue after tx drop error
  qeth: Prepare-function to call s390dbf was wrong
  qeth: reduce number of kernel messages
  qeth: Use ccw_device_get_id().
  qeth: layer 3 Oops in ip event handler
  virtio: use callback on empty in virtio_net
  virtio: virtio_net free transmit skbs in a timer
  virtio: Fix typo in virtio_net_hdr comments
  virtio_net: Fix skb->csum_start computation
  ehea: set mac address fix
  sfc: Recover from RX queue flush failure
  add missing lance_* exports
  ixgbe: fix typo
  forcedeth: msi interrupts
  ipsec: pfkey should ignore events when no listeners
  pppoe: Unshare skb before anything else
  ...