This adds support for KASLR is implemented, based on entropy provided by
the bootloader in the /chosen/kaslr-seed DT property. Depending on the size
of the address space (VA_BITS) and the page size, the entropy in the
virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all
4 levels), with the sidenote that displacements that result in the kernel
image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB
granule kernels, respectively) are not allowed, and will be rounded up to
an acceptable value.

If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is
randomized independently from the core kernel. This makes it less likely
that the location of core kernel data structures can be determined by an
adversary, but causes all function calls from modules into the core kernel
to be resolved via entries in the module PLTs.

If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is
randomized by choosing a page aligned 128 MB region inside the interval
[_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of
entropy (depending on page size), independently of the kernel randomization,
but still guarantees that modules are within the range of relative branch
and jump instructions (with the caveat that, since the module region is
shared with other uses of the vmalloc area, modules may need to be loaded
further away if the module region is exhausted)
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This implements CONFIG_RELOCATABLE, which links the final vmlinux
image with a dynamic relocation section, allowing the early boot code
to perform a relocation to a different virtual address at runtime.

This is a prerequisite for KASLR (CONFIG_RANDOMIZE_BASE).
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Instead of using absolute addresses for both the exception location
and the fixup, use offsets relative to the exception table entry values.
Not only does this cut the size of the exception table in half, it is
also a prerequisite for KASLR, since absolute exception table entries
are subject to dynamic relocation, which is incompatible with the sorting
of the exception table that occurs at build time.

This patch also introduces the _ASM_EXTABLE preprocessor macro (which
exists on x86 as well) and its _asm_extable assembly counterpart, as
shorthands to emit exception table entries.
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This adds support to the generic search_extable() and sort_extable()
implementations for dealing with exception table entries whose fields
contain relative offsets rather than absolute addresses.
Acked-by: NHelge Deller <deller@gmx.de>
Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NH. Peter Anvin <hpa@linux.intel.com>
Acked-by: NTony Luck <tony.luck@intel.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Add support to scripts/sortextable for handling relocatable (PIE)
executables, whose ELF type is ET_DYN, not ET_EXEC. Other than adding
support for the new type, no changes are needed.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This reshuffles some code in asm/elf.h and puts a #ifndef __ASSEMBLY__
around its C definitions so that the CPP defines can be used in asm
source files as well.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Before implementing KASLR for arm64 by building a self-relocating PIE
executable, we have to ensure that values we use before the relocation
routine is executed are not subject to dynamic relocation themselves.
This applies not only to virtual addresses, but also to values that are
supplied by the linker at build time and relocated using R_AARCH64_ABS64
relocations.

So instead, use assemble time constants, or force the use of static
relocations by folding the constants into the instructions.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Unfortunately, the current way of using the linker to emit build time
constants into the Image header will no longer work once we switch to
the use of PIE executables. The reason is that such constants are emitted
into the binary using R_AARCH64_ABS64 relocations, which are resolved at
runtime, not at build time, and the places targeted by those relocations
will contain zeroes before that.

So refactor the endian swapping linker script constant generation code so
that it emits the upper and lower 32-bit words separately.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This adds support for emitting PLTs at module load time for relative
branches that are out of range. This is a prerequisite for KASLR, which
may place the kernel and the modules anywhere in the vmalloc area,
making it more likely that branch target offsets exceed the maximum
range of +/- 128 MB.

In this version, I removed the distinction between relocations against
.init executable sections and ordinary executable sections. The reason
is that it is hardly worth the trouble, given that .init.text usually
does not contain that many far branches, and this version now only
reserves PLT entry space for jump and call relocations against undefined
symbols (since symbols defined in the same module can be assumed to be
within +/- 128 MB)

For example, the mac80211.ko module (which is fairly sizable at ~400 KB)
built with -mcmodel=large gives the following relocation counts:

                    relocs    branches   unique     !local
  .text              3925       3347       518        219
  .init.text           11          8         7          1
  .exit.text            4          4         4          1
  .text.unlikely       81         67        36         17

('unique' means branches to unique type/symbol/addend combos, of which
!local is the subset referring to undefined symbols)

IOW, we are only emitting a single PLT entry for the .init sections, and
we are better off just adding it to the core PLT section instead.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Instead of reversing the header dependency between asm/bug.h and
asm/debug-monitors.h, split off the brk instruction immediate value
defines into a new header asm/brk-imm.h, and include it from both.

This solves the circular dependency issue that prevents BUG() from
being used in some header files, and keeps the definitions together.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Since PAGE_OFFSET is chosen such that it cuts the kernel VA space right
in half, and since the size of the kernel VA space itself is always a
power of 2, we can treat PAGE_OFFSET as a bitmask and replace the
additions/subtractions with 'or' and 'and-not' operations.

For the comparison against PAGE_OFFSET, a mov/cmp/branch sequence ends
up getting replaced with a single tbz instruction. For the additions and
subtractions, we save a mov instruction since the mask is folded into the
instruction's immediate field.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Checking whether memstart_addr has been assigned every time it is
referenced adds a branch instruction that may hurt performance if
the reference in question occurs on a hot path. So only perform the
check if CONFIG_DEBUG_VM=y.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
[catalin.marinas@arm.com: replaced #ifdef with VM_BUG_ON]
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The former gives better error reporting on unhandled permission faults
(introduced by the UAO patches).
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This relaxes the kernel Image placement requirements, so that it
may be placed at any 2 MB aligned offset in physical memory.

This is accomplished by ignoring PHYS_OFFSET when installing
memblocks, and accounting for the apparent virtual offset of
the kernel Image. As a result, virtual address references
below PAGE_OFFSET are correctly mapped onto physical references
into the kernel Image regardless of where it sits in memory.

Special care needs to be taken for dealing with memory limits passed
via mem=, since the generic implementation clips memory top down, which
may clip the kernel image itself if it is loaded high up in memory. To
deal with this case, we simply add back the memory covering the kernel
image, which may result in more memory to be retained than was passed
as a mem= parameter.

Since mem= should not be considered a production feature, a panic notifier
handler is installed that dumps the memory limit at panic time if one was
set.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Before deferring the assignment of memstart_addr in a subsequent patch, to
the moment where all memory has been discovered and possibly clipped based
on the size of the linear region and the presence of a mem= command line
parameter, we need to ensure that memstart_addr is not used to perform __va
translations before it is assigned.

One such use is in the generic early DT discovery of the initrd location,
which is recorded as a virtual address in the globals initrd_start and
initrd_end. So wire up the generic support to declare the initrd addresses,
and implement it without __va() translations, and perform the translation
after memstart_addr has been assigned.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This moves the module area to right before the vmalloc area, and moves
the kernel image to the base of the vmalloc area. This is an intermediate
step towards implementing KASLR, which allows the kernel image to be
located anywhere in the vmalloc area.

Since other subsystems such as hibernate may still need to refer to the
kernel text or data segments via their linears addresses, both are mapped
in the linear region as well. The linear alias of the text region is
mapped read-only/non-executable to prevent inadvertent modification or
execution.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

KVM on arm64 uses a fixed offset between the linear mapping at EL1 and
the HYP mapping at EL2. Before we can move the kernel virtual mapping
out of the linear mapping, we have to make sure that references to kernel
symbols that are accessed via the HYP mapping are translated to their
linear equivalent.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Since the early fixmap page tables are populated using pages that are
part of the static footprint of the kernel, they are covered by the
initial kernel mapping, and we can refer to them without using __va/__pa
translations, which are tied to the linear mapping.

Since the fixmap page tables are disjoint from the kernel mapping up
to the top level pgd entry, we can refer to bm_pte[] directly, and there
is no need to walk the page tables and perform __pa()/__va() translations
at each step.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The page table accessors pte_offset(), pud_offset() and pmd_offset()
rely on __va translations, so they can only be used after the linear
mapping has been installed. For the early fixmap and kasan init routines,
whose page tables are allocated statically in the kernel image, these
functions will return bogus values. So implement pte_offset_kimg(),
pmd_offset_kimg() and pud_offset_kimg(), which can be used instead
before any page tables have been allocated dynamically.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This introduces the preprocessor symbol KIMAGE_VADDR which will serve as
the symbolic virtual base of the kernel region, i.e., the kernel's virtual
offset will be KIMAGE_VADDR + TEXT_OFFSET. For now, we define it as being
equal to PAGE_OFFSET, but in the future, it will be moved below it once
we move the kernel virtual mapping out of the linear mapping.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This wires up the existing generic huge-vmap feature, which allows
ioremap() to use PMD or PUD sized block mappings. It also adds support
to the unmap path for dealing with block mappings, which will allow us
to unmap the __init region using unmap_kernel_range() in a subsequent
patch.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Currently, using BUG_ON() in header files is cumbersome, due to the fact
that asm/bug.h transitively includes a lot of other header files, resulting
in the actual BUG_ON() invocation appearing before its definition in the
preprocessor input. So let's reverse the #include dependency between
asm/bug.h and asm/debug-monitors.h, by moving the definition of BUG_BRK_IMM
from the latter to the former. Also fix up one user of asm/debug-monitors.h
which relied on a transitive include.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Since architectures may not yet have their linear mapping up and running
when the initrd address is discovered from the DT, factor out the
assignment of initrd_start and initrd_end, so that an architecture can
override it and use the translation it needs.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

By default, early_init_dt_add_memory_arch() ignores memory below
the base of the kernel image since it won't be addressable via the
linear mapping. However, this is not appropriate anymore once we
decouple the kernel text mapping from the linear mapping, so archs
may want to drop the low limit entirely. So allow the minimum to be
overridden by setting MIN_MEMBLOCK_ADDR.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This function was introduced by previous commits implementing UAO.
However, it can be replaced with task_thread_info() in
uao_thread_switch() or get_fs() in do_page_fault() (the latter being
called only on the current context, so no need for using the saved
pt_regs).
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

If a CPU supports both Privileged Access Never (PAN) and User Access
Override (UAO), we don't need to disable/re-enable PAN round all
copy_to_user() like calls.

UAO alternatives cause these calls to use the 'unprivileged' load/store
instructions, which are overridden to be the privileged kind when
fs==KERNEL_DS.

This patch changes the copy_to_user() calls to have their PAN toggling
depend on a new composite 'feature' ARM64_ALT_PAN_NOT_UAO.

If both features are detected, PAN will be enabled, but the copy_to_user()
alternatives will not be applied. This means PAN will be enabled all the
time for these functions. If only PAN is detected, the toggling will be
enabled as normal.

This will save the time taken to disable/re-enable PAN, and allow us to
catch copy_to_user() accesses that occur with fs==KERNEL_DS.

Futex and swp-emulation code continue to hang their PAN toggling code on
ARM64_HAS_PAN.
Signed-off-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

CPU feature code uses the desc field as a test to find the end of the list,
this means every entry must have a description. This generates noise for
entries in the list that aren't really features, but combinations of them.
e.g.
> CPU features: detected feature: Privileged Access Never
> CPU features: detected feature: PAN and not UAO

These combination features are needed for corner cases with alternatives,
where cpu features interact.

Change all walkers of the arm64_features[] and arm64_hwcaps[] lists to test
'matches' not 'desc', and only print 'desc' if it is non-NULL.
Signed-off-by: NJames Morse <james.morse@arm.com>
Reviewed-by : Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

'User Access Override' is a new ARMv8.2 feature which allows the
unprivileged load and store instructions to be overridden to behave in
the normal way.

This patch converts {get,put}_user() and friends to use ldtr*/sttr*
instructions - so that they can only access EL0 memory, then enables
UAO when fs==KERNEL_DS so that these functions can access kernel memory.

This allows user space's read/write permissions to be checked against the
page tables, instead of testing addr<USER_DS, then using the kernel's
read/write permissions.
Signed-off-by: NJames Morse <james.morse@arm.com>
[catalin.marinas@arm.com: move uao_thread_switch() above dsb()]
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

ARMv8.2 adds a new feature register id_aa64mmfr2. This patch adds the
cpu feature boiler plate used by the actual features in later patches.
Signed-off-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Older assemblers may not have support for newer feature registers. To get
round this, sysreg.h provides a 'mrs_s' macro that takes a register
encoding and generates the raw instruction.

Change read_cpuid() to use mrs_s in all cases so that new registers
don't have to be a special case. Including sysreg.h means we need to move
the include and definition of read_cpuid() after the #ifndef __ASSEMBLY__
to avoid syntax errors in vmlinux.lds.
Signed-off-by: NJames Morse <james.morse@arm.com>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The __reg_num_xNN symbols that are used to implement the msr_s and
mrs_s macros are recorded in the ELF metadata of each object file.
This does not affect the size of the final binary, but it does clutter
the output of tools like readelf, i.e.,

  $ readelf -a vmlinux |grep -c __reg_num_x
  50976

So let's use symbols with the .L prefix, these are strictly local,
and don't end up in the object files.

  $ readelf -a vmlinux |grep -c __reg_num_x
  0
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Although the arm64 vDSO is cleanly separated by code/data with the
code being read-only in userspace mappings, the code page is still
writable from the kernel.  There have been exploits (such as
http://itszn.com/blog/?p=21) that take advantage of this on x86 to go
from a bad kernel write to full root.

Prevent this specific exploit on arm64 by putting the vDSO code page
in read-only memory as well.

Before the change:
[    3.138366] vdso: 2 pages (1 code @ ffffffc000a71000, 1 data @ ffffffc000a70000)
---[ Kernel Mapping ]---
0xffffffc000000000-0xffffffc000082000         520K     RW NX SHD AF            UXN MEM/NORMAL
0xffffffc000082000-0xffffffc000200000        1528K     ro x  SHD AF            UXN MEM/NORMAL
0xffffffc000200000-0xffffffc000800000           6M     ro x  SHD AF        BLK UXN MEM/NORMAL
0xffffffc000800000-0xffffffc0009b6000        1752K     ro x  SHD AF            UXN MEM/NORMAL
0xffffffc0009b6000-0xffffffc000c00000        2344K     RW NX SHD AF            UXN MEM/NORMAL
0xffffffc000c00000-0xffffffc008000000         116M     RW NX SHD AF        BLK UXN MEM/NORMAL
0xffffffc00c000000-0xffffffc07f000000        1840M     RW NX SHD AF        BLK UXN MEM/NORMAL
0xffffffc800000000-0xffffffc840000000           1G     RW NX SHD AF        BLK UXN MEM/NORMAL
0xffffffc840000000-0xffffffc87ae00000         942M     RW NX SHD AF        BLK UXN MEM/NORMAL
0xffffffc87ae00000-0xffffffc87ae70000         448K     RW NX SHD AF            UXN MEM/NORMAL
0xffffffc87af80000-0xffffffc87af8a000          40K     RW NX SHD AF            UXN MEM/NORMAL
0xffffffc87af8b000-0xffffffc87b000000         468K     RW NX SHD AF            UXN MEM/NORMAL
0xffffffc87b000000-0xffffffc87fe00000          78M     RW NX SHD AF        BLK UXN MEM/NORMAL
0xffffffc87fe00000-0xffffffc87ff50000        1344K     RW NX SHD AF            UXN MEM/NORMAL
0xffffffc87ff90000-0xffffffc87ffa0000          64K     RW NX SHD AF            UXN MEM/NORMAL
0xffffffc87fff0000-0xffffffc880000000          64K     RW NX SHD AF            UXN MEM/NORMAL

After:
[    3.138368] vdso: 2 pages (1 code @ ffffffc0006de000, 1 data @ ffffffc000a74000)
---[ Kernel Mapping ]---
0xffffffc000000000-0xffffffc000082000         520K     RW NX SHD AF            UXN MEM/NORMAL
0xffffffc000082000-0xffffffc000200000        1528K     ro x  SHD AF            UXN MEM/NORMAL
0xffffffc000200000-0xffffffc000800000           6M     ro x  SHD AF        BLK UXN MEM/NORMAL
0xffffffc000800000-0xffffffc0009b8000        1760K     ro x  SHD AF            UXN MEM/NORMAL
0xffffffc0009b8000-0xffffffc000c00000        2336K     RW NX SHD AF            UXN MEM/NORMAL
0xffffffc000c00000-0xffffffc008000000         116M     RW NX SHD AF        BLK UXN MEM/NORMAL
0xffffffc00c000000-0xffffffc07f000000        1840M     RW NX SHD AF        BLK UXN MEM/NORMAL
0xffffffc800000000-0xffffffc840000000           1G     RW NX SHD AF        BLK UXN MEM/NORMAL
0xffffffc840000000-0xffffffc87ae00000         942M     RW NX SHD AF        BLK UXN MEM/NORMAL
0xffffffc87ae00000-0xffffffc87ae70000         448K     RW NX SHD AF            UXN MEM/NORMAL
0xffffffc87af80000-0xffffffc87af8a000          40K     RW NX SHD AF            UXN MEM/NORMAL
0xffffffc87af8b000-0xffffffc87b000000         468K     RW NX SHD AF            UXN MEM/NORMAL
0xffffffc87b000000-0xffffffc87fe00000          78M     RW NX SHD AF        BLK UXN MEM/NORMAL
0xffffffc87fe00000-0xffffffc87ff50000        1344K     RW NX SHD AF            UXN MEM/NORMAL
0xffffffc87ff90000-0xffffffc87ffa0000          64K     RW NX SHD AF            UXN MEM/NORMAL
0xffffffc87fff0000-0xffffffc880000000          64K     RW NX SHD AF            UXN MEM/NORMAL

Inspired by https://lkml.org/lkml/2016/1/19/494 based on work by the
PaX Team, Brad Spengler, and Kees Cook.
Signed-off-by: NDavid Brown <david.brown@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
[catalin.marinas@arm.com: removed superfluous __PAGE_ALIGNED_DATA]
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

To enable UBSAN on arm64, ARCH_HAS_UBSAN_SANITIZE_ALL need to be selected.

Basic kernel bootup test is passed on arm64 with CONFIG_UBSAN_SANITIZE_ALL
enabled.
Signed-off-by: NYang Shi <yang.shi@linaro.org>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917
in_atomic(): 1, irqs_disabled(): 128, pid: 383, name: sh
Preemption disabled at:[<ffff800000124c18>] kgdb_cpu_enter+0x158/0x6b8

CPU: 3 PID: 383 Comm: sh Tainted: G        W       4.1.13-rt13 #2
Hardware name: Freescale Layerscape 2085a RDB Board (DT)
Call trace:
[<ffff8000000885e8>] dump_backtrace+0x0/0x128
[<ffff800000088734>] show_stack+0x24/0x30
[<ffff80000079a7c4>] dump_stack+0x80/0xa0
[<ffff8000000bd324>] ___might_sleep+0x18c/0x1a0
[<ffff8000007a20ac>] __rt_spin_lock+0x2c/0x40
[<ffff8000007a2268>] rt_read_lock+0x40/0x58
[<ffff800000085328>] single_step_handler+0x38/0xd8
[<ffff800000082368>] do_debug_exception+0x58/0xb8
Exception stack(0xffff80834a1e7c80 to 0xffff80834a1e7da0)
7c80: ffffff9c ffffffff 92c23ba0 0000ffff 4a1e7e40 ffff8083 001bfcc4 ffff8000
7ca0: f2000400 00000000 00000000 00000000 4a1e7d80 ffff8083 0049501c ffff8000
7cc0: 00005402 00000000 00aaa210 ffff8000 4a1e7ea0 ffff8083 000833f4 ffff8000
7ce0: ffffff9c ffffffff 92c23ba0 0000ffff 4a1e7ea0 ffff8083 001bfcc0 ffff8000
7d00: 4a0fc400 ffff8083 00005402 00000000 4a1e7d40 ffff8083 00490324 ffff8000
7d20: ffffff9c 00000000 92c23ba0 0000ffff 000a0000 00000000 00000000 00000000
7d40: 00000008 00000000 00080000 00000000 92c23b8b 0000ffff 92c23b8e 0000ffff
7d60: 00000038 00000000 00001cb2 00000000 00000005 00000000 92d7b498 0000ffff
7d80: 01010101 01010101 92be9000 0000ffff 00000000 00000000 00000030 00000000
[<ffff8000000833f4>] el1_dbg+0x18/0x6c

This issue is similar with 62c6c61a("arm64: replace read_lock to rcu lock in
call_break_hook"), but comes to single_step_handler.

This also solves kgdbts boot test silent hang issue on 4.4 -rt kernel.
Signed-off-by: NYang Shi <yang.shi@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

With CONFIG_DEBUG_PAGEALLOC, pages do not have the valid bit
set when free in the buddy allocator. Add an indiciation to
the page table dumping code that the valid bit is not set,
'F' for fault, to make this easier to understand.
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NLaura Abbott <labbott@fedoraproject.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

ARCH_SUPPORTS_DEBUG_PAGEALLOC provides a hook to map and unmap
pages for debugging purposes. This requires memory be mapped
with PAGE_SIZE mappings since breaking down larger mappings
at runtime will lead to TLB conflicts. Check if debug_pagealloc
is enabled at runtime and if so, map everyting with PAGE_SIZE
pages. Implement the functions to actually map/unmap the
pages at runtime.
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NLaura Abbott <labbott@fedoraproject.org>
[catalin.marinas@arm.com: static annotation block_mappings_allowed() and #ifdef]
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

create_mapping is only used in fixmap_remap_fdt. All the create_mapping
calls need to happen on existing translation table pages without
additional allocations. Rather than have an alloc function be called
and fail, just set it to NULL and catch its use. Also change
the name to create_mapping_noalloc to better capture what exactly is
going on.
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NLaura Abbott <labbott@fedoraproject.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

As of 52e662326e1e ("arm64: prefetch: don't provide spin_lock_prefetch
with LSE"), spin_lock_prefetch is patched at runtime when the LSE atomics
are in use. This relies on the ARM64_LSE_ATOMIC_INSN macro to drive
the alternatives framework, but that macro is only available via
asm/lse.h, which isn't explicitly included in processor.h. Consequently,
drivers can run into build failures such as:

   In file included from include/linux/prefetch.h:14:0,
                    from drivers/net/ethernet/intel/i40e/i40e_txrx.c:27:
   arch/arm64/include/asm/processor.h: In function 'spin_lock_prefetch':
   arch/arm64/include/asm/processor.h:183:15: error: expected string literal before 'ARM64_LSE_ATOMIC_INSN'
     asm volatile(ARM64_LSE_ATOMIC_INSN(

This patch add the missing include and gets things building again.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

On ThunderX T88 pass 1 and pass 2, there is no hardware prefetching so
we need to patch in explicit software prefetching instructions

Prefetching improves this code by 60% over the original code and 2x
over the code without prefetching for the affected hardware using the
benchmark code at https://github.com/apinski-cavium/copy_page_benchmarkSigned-off-by: NAndrew Pinski <apinski@cavium.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Tested-by: NAndrew Pinski <apinski@cavium.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

We want to avoid lots of different copy_page implementations, settling
for something that is "good enough" everywhere and hopefully easy to
understand and maintain whilst we're at it.

This patch reworks our copy_page implementation based on discussions
with Cavium on the list and benchmarking on Cortex-A processors so that:

  - The loop is unrolled to copy 128 bytes per iteration

  - The reads are offset so that we read from the next 128-byte block
    in the same iteration that we store the previous block

  - Explicit prefetch instructions are removed for now, since they hurt
    performance on CPUs with hardware prefetching

  - The loop exit condition is calculated at the start of the loop
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Tested-by: NAndrew Pinski <apinski@cavium.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>