- 17 7月, 2017 3 次提交
-
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_supported_addrs_param_t, and replace with struct sctp_supported_addrs_param in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_ipv6addr_param_t, and replace with struct sctp_ipv6addr_param in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_ipv4addr_param_t, and replace with struct sctp_ipv4addr_param in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 7月, 2017 1 次提交
-
-
由 Reshetova, Elena 提交于
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: NElena Reshetova <elena.reshetova@intel.com> Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com> Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NDavid Windsor <dwindsor@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 7月, 2017 6 次提交
-
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_init_chunk_t, and replace with struct sctp_init_chunk in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_inithdr_t, and replace with struct sctp_inithdr in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_param_t, and replace with struct sctp_paramhdr in the places where it's using this typedef. It is also to remove the useless declaration sctp_addip_addr_config and fix the lack of params for some other functions' declaration. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_paramhdr_t, and replace with struct sctp_paramhdr in the places where it's using this typedef. It is also to fix some indents and use sizeof(variable) instead of sizeof(type). Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_cid_t, and replace with struct sctp_cid in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_chunkhdr_t, and replace with struct sctp_chunkhdr in the places where it's using this typedef. It is also to fix some indents and use sizeof(variable) instead of sizeof(type)., especially in sctp_new. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 6月, 2017 1 次提交
-
-
由 yuan linyu 提交于
Signed-off-by: Nyuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 6月, 2017 3 次提交
-
-
由 Johannes Berg 提交于
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 6月, 2017 1 次提交
-
-
由 Johannes Berg 提交于
Use the recently introduced helper to replace the pattern of skb_put() && memset(), this transformation was done with the following spatch: @@ identifier p; expression len; expression skb; @@ -p = skb_put(skb, len); -memset(p, 0, len); +p = skb_put_zero(skb, len); Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 6月, 2017 2 次提交
-
-
由 Xin Long 提交于
Since last patch, sctp doesn't need to alloc memory for asoc->stream any more. sctp_stream_new and sctp_stream_init both are used to alloc memory for stream.in or stream.out, and their names are also confusing. This patch is to merge them into sctp_stream_init, and only pass stream and streamcnt parameters into it, instead of the whole asoc. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
As Marcelo's suggestion, stream is a fixed size member of asoc and would not grow with more streams. To avoid an allocation for it, this patch is to define it as an object instead of pointer and update the places using it, also create sctp_stream_update() called in sctp_assoc_update() to migrate the stream info from one stream to another. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 5月, 2017 1 次提交
-
-
由 Xin Long 提交于
After sctp changed to use transport hashtable, a transport would be added into global hashtable when adding the peer to an asoc, then the asoc can be got by searching the transport in the hashtbale. The problem is when processing dupcookie in sctp_sf_do_5_2_4_dupcook, a new asoc would be created. A peer with the same addr and port as the one in the old asoc might be added into the new asoc, but fail to be added into the hashtable, as they also belong to the same sk. It causes that sctp's dupcookie processing can not really work. Since the new asoc will be freed after copying it's information to the old asoc, it's more like a temp asoc. So this patch is to fix it by setting it as a temp asoc to avoid adding it's any transport into the hashtable and also avoid allocing assoc_id. An extra thing it has to do is to also alloc stream info for any temp asoc, as sctp dupcookie process needs it to update old asoc. But I don't think it would hurt something, as a temp asoc would always be freed after finishing processing cookie echo packet. Reported-by: NJianwen Ji <jiji@redhat.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 4月, 2017 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 31 3月, 2017 1 次提交
-
-
由 Xin Long 提交于
When sending a msg without asoc established, sctp will send INIT packet first and then enqueue chunks. Before receiving INIT_ACK, stream info is not yet alloced. But enqueuing chunks needs to access stream info, like out stream state and out stream cnt. This patch is to fix it by allocing out stream info when initializing an asoc, allocing in stream and re-allocing out stream when processing init. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 2月, 2017 3 次提交
-
-
由 Xin Long 提交于
This patch is to add a function sctp_verify_reconf to do some length check and multi-params check for sctp stream reconf according to rfc6525 section 3.1. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to implement Receiver-Side Procedures for the Incoming SSN Reset Request Parameter described in rfc6525 section 5.2.3. It's also to move str_list endian conversion out of sctp_make_strreset_req, so that sctp_make_strreset_req can be used more conveniently to process inreq. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to define Re-configuration Response Parameter described in rfc6525 section 4.4. As optional fields are only for SSN/TSN Reset Request Parameter, it uses another function to make that. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 2月, 2017 2 次提交
-
-
由 Xin Long 提交于
This patch is to define Add Incoming/Outgoing Streams Request Parameter described in rfc6525 section 4.5 and 4.6. They can be in one same chunk trunk as rfc6525 section 3.1-7 describes, so make them in one function. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to define SSN/TSN Reset Request Parameter described in rfc6525 section 4.3. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 2月, 2017 1 次提交
-
-
由 Julian Anastasov 提交于
Add new transport flag to allow sockets to confirm neighbour. When same struct dst_entry can be used for many different neighbours we can not use it for pending confirmations. The flag is propagated from transport to every packet. It is reset when cached dst is reset. Reported-by: NYueHaibing <yuehaibing@huawei.com> Fixes: 5110effe ("net: Do delayed neigh confirmation.") Fixes: f2bb4bed ("ipv4: Cache output routes in fib_info nexthops.") Signed-off-by: NJulian Anastasov <ja@ssi.bg> Acked-by: NEric Dumazet <edumazet@google.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 1月, 2017 2 次提交
-
-
由 Xin Long 提交于
This patch is to add reconf_enable field in all of asoc ep and netns to indicate if they support stream reset. When initializing, asoc reconf_enable get the default value from ep reconf_enable which is from netns netns reconf_enable by default. It is also to add reconf_capable in asoc peer part to know if peer supports reconf_enable, the value is set if ext params have reconf chunk support when processing init chunk, just as rfc6525 section 5.1.1 demands. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to add asoc strreset_outseq and strreset_inseq for saving the reconf request sequence, initialize them when create assoc and process init, and also to define Incoming and Outgoing SSN Reset Request Parameter described in rfc6525 section 4.1 and 4.2, As they can be in one same chunk as section rfc6525 3.1-3 describes, it makes them in one function. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 1月, 2017 1 次提交
-
-
由 Marcelo Ricardo Leitner 提交于
Assigned but not used. Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Reviewed-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 1月, 2017 1 次提交
-
-
由 Xin Long 提交于
sctp stream reconf, described in RFC 6525, needs a structure to save per stream information in assoc, like stream state. In the future, sctp stream scheduler also needs it to save some stream scheduler params and queues. This patchset is to prepare the stream array in assoc for stream reconf. It defines sctp_stream that includes stream arrays inside to replace ssnmap. Note that we use different structures for IN and OUT streams, as the members in per OUT stream will get more and more different from per IN stream. v1->v2: - put these patches into a smaller group. v2->v3: - define sctp_stream to contain stream arrays, and create stream.c to put stream-related functions. - merge 3 patches into 1, as new sctp_stream has the same name with before. Signed-off-by: NXin Long <lucien.xin@gmail.com> Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 9月, 2016 1 次提交
-
-
由 Xin Long 提交于
Now sctp uses chunk->prsctp_param to save the prsctp param for all the prsctp polices, we didn't need to introduce prsctp_param to sctp_chunk. We can just use chunk->sinfo.sinfo_timetolive for RTX and BUF polices, and reuse msg->expires_at for TTL policy, as the prsctp polices and old expires policy are mutual exclusive. This patch is to remove prsctp_param from sctp_chunk, and reuse msg's expires_at for TTL and chunk's sinfo.sinfo_timetolive for RTX and BUF polices. Note that sctp can't use chunk's sinfo.sinfo_timetolive for TTL policy, as it needs a u64 variables to save the expires_at time. This one also fixes the "netperf-Throughput_Mbps -37.2% regression" issue. Fixes: a6c2f792 ("sctp: implement prsctp TTL policy") Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 9月, 2016 1 次提交
-
-
由 Marcelo Ricardo Leitner 提交于
To something more meaningful these days, specially because this is working on packet headers or lengths and which are not tied to any CPU arch but to the protocol itself. So, WORD_TRUNC becomes SCTP_TRUNC4 and WORD_ROUND becomes SCTP_PAD4. Reported-by: NDavid Laight <David.Laight@ACULAB.COM> Reported-by: NDavid Miller <davem@davemloft.net> Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 7月, 2016 1 次提交
-
-
由 Marcelo Ricardo Leitner 提交于
Identifying address family operations during rx path is not something expensive but it's ugly to the eye to have it done multiple times, specially when we already validated it during initial rx processing. This patch takes advantage of the now shared sctp_input_cb and make the pointer to the operations readily available. Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 7月, 2016 4 次提交
-
-
由 Xin Long 提交于
prsctp PRIO policy is a policy to abandon lower priority chunks when asoc doesn't have enough snd buffer, so that the current chunk with higher priority can be queued successfully. Similar to TTL/RTX policy, we will set the priority of the chunk to prsctp_param with sinfo->sinfo_timetolive in sctp_set_prsctp_policy(). So if PRIO policy is enabled, msg->expire_at won't work. asoc->sent_cnt_removable will record how many chunks can be checked to remove. If priority policy is enabled, when the chunk is queued into the out_queue, we will increase sent_cnt_removable. When the chunk is moved to abandon_queue or dequeue and free, we will decrease sent_cnt_removable. In sctp_sendmsg, we will check if there is enough snd buffer for current msg and if sent_cnt_removable is not 0. Then try to abandon chunks in sctp_prune_prsctp when sendmsg from the retransmit/transmited queue, and free chunks from out_queue in right order until the abandon+free size > msg_len - sctp_wfree. For the abandon size, we have to wait until it sends FORWARD TSN, receives the sack and the chunks are really freed. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
prsctp RTX policy is a policy to abandon chunks when they are retransmitted beyond the max count. This patch uses sent_count to count how many times one chunk has been sent, and prsctp_param is the max rtx count, which is from sinfo->sinfo_timetolive in sctp_set_prsctp_policy(). So similar to TTL policy, if RTX policy is enabled, msg->expire_at won't work. Then in sctp_chunk_abandoned, this patch checks if chunk->sent_count is bigger than chunk->prsctp_param to abandon this chunk. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
prsctp TTL policy is a policy to abandon chunks when they expire at the specific time in local stack. It's similar with expires_at in struct sctp_datamsg. This patch uses sinfo->sinfo_timetolive to set the specific time for TTL policy. sinfo->sinfo_timetolive is also used for msg->expires_at. So if prsctp_enable or TTL policy is not enabled, msg->expires_at still works as before. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
According to section 4.5 of rfc7496, prsctp_enable should be per asoc. We will add prsctp_enable to both asoc and ep, and replace the places where it used net.sctp->prsctp_enable with asoc->prsctp_enable. ep->prsctp_enable will be initialized with net.sctp->prsctp_enable, and asoc->prsctp_enable will be initialized with ep->prsctp_enable. We can also modify it's value through sockopt SCTP_PR_SUPPORTED. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 4月, 2016 1 次提交
-
-
由 Marcelo Ricardo Leitner 提交于
Currently on high rate SCTP streams the heartbeat timer refresh can consume quite a lot of resources as timer updates are costly and it contains a random factor, which a) is also costly and b) invalidates mod_timer() optimization for not editing a timer to the same value. It may even cause the timer to be slightly advanced, for no good reason. As suggested by David Laight this patch now removes this timer update from hot path by leaving the timer on and re-evaluating upon its expiration if the heartbeat is still needed or not, similarly to what is done for TCP. If it's not needed anymore the timer is re-scheduled to the new timeout, considering the time already elapsed. For this, we now record the last tx timestamp per transport, updated in the same spots as hb timer was restarted on tx. Also split up sctp_transport_reset_timers into sctp_transport_reset_t3_rtx and sctp_transport_reset_hb_timer, so we can re-arm T3 without re-arming the heartbeat one. On loopback with MTU of 65535 and data chunks with 1636, so that we have a considerable amount of chunks without stressing system calls, netperf -t SCTP_STREAM -l 30, perf looked like this before: Samples: 103K of event 'cpu-clock', Event count (approx.): 25833000000 Overhead Command Shared Object Symbol + 6,15% netperf [kernel.vmlinux] [k] copy_user_enhanced_fast_string - 5,43% netperf [kernel.vmlinux] [k] _raw_write_unlock_irqrestore - _raw_write_unlock_irqrestore - 96,54% _raw_spin_unlock_irqrestore - 36,14% mod_timer + 97,24% sctp_transport_reset_timers + 2,76% sctp_do_sm + 33,65% __wake_up_sync_key + 28,77% sctp_ulpq_tail_event + 1,40% del_timer - 1,84% mod_timer + 99,03% sctp_transport_reset_timers + 0,97% sctp_do_sm + 1,50% sctp_ulpq_tail_event And after this patch, now with netperf -l 60: Samples: 230K of event 'cpu-clock', Event count (approx.): 57707250000 Overhead Command Shared Object Symbol + 5,65% netperf [kernel.vmlinux] [k] memcpy_erms + 5,59% netperf [kernel.vmlinux] [k] copy_user_enhanced_fast_string - 5,05% netperf [kernel.vmlinux] [k] _raw_spin_unlock_irqrestore - _raw_spin_unlock_irqrestore + 49,89% __wake_up_sync_key + 45,68% sctp_ulpq_tail_event - 2,85% mod_timer + 76,51% sctp_transport_reset_t3_rtx + 23,49% sctp_do_sm + 1,55% del_timer + 2,50% netperf [sctp] [k] sctp_datamsg_from_user + 2,26% netperf [sctp] [k] sctp_sendmsg Throughput-wise, from 6800mbps without the patch to 7050mbps with it, ~3.7%. Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 3月, 2016 1 次提交
-
-
由 Marcelo Ricardo Leitner 提交于
Currently sctp_sendmsg() triggers some calls that will allocate memory with GFP_ATOMIC even when not necessary. In the case of sctp_packet_transmit it will allocate a linear skb that will be used to construct the packet and this may cause sends to fail due to ENOMEM more often than anticipated specially with big MTUs. This patch thus allows it to inherit gfp flags from upper calls so that it can use GFP_KERNEL if it was triggered by a sctp_sendmsg call or similar. All others, like retransmits or flushes started from BH, are still allocated using GFP_ATOMIC. In netperf tests this didn't result in any performance drawbacks when memory is not too fragmented and made it trigger ENOMEM way less often. Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 3月, 2016 1 次提交
-
-
由 Marcelo Ricardo Leitner 提交于
Dmitry reported that sctp_add_bind_addr may read more bytes than expected in case the parameter is a IPv4 addr supplied by the user through calls such as sctp_bindx_add(), because it always copies sizeof(union sctp_addr) while the buffer may be just a struct sockaddr_in, which is smaller. This patch then fixes it by limiting the memcpy to the min between the union size and a (new parameter) provided addr size. Where possible this parameter still is the size of that union, except for reading from user-provided buffers, which then it accounts for protocol type. Reported-by: NDmitry Vyukov <dvyukov@google.com> Tested-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-