On vega20, there is an SMU message to query it.  On navi, it's fetched
from the metrics table.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The dpm sensor function already does this for us.  This fixes
the freq*_input files with the new SMU implementation.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As the lock was already held on the entrance to smu_handle_task.

- V2: lock in small granularity
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Make mem_busy_percent sysfs interface invisible on Vega10.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c:1496 amdgpu_hwmon_show_temp() error: uninitialized symbol 'temp'.
Signed-off-by: NErnst Sjöstrand <ernstp@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c:693 amdgpu_set_pp_od_clk_voltage() error: uninitialized symbol 'ret'.
Signed-off-by: NErnst Sjöstrand <ernstp@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

the smu->mutex is internal lock resource in sw-smu, some functions will use
it at the same time, so it maybe will cause deadlock issue.
this patch fix this issue in smu_force_performance_level function.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add sysfs interface of force_clk_levels sysfs for navi10.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add sysfs interface of print_clk_levels sysfs for navi10.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable athub2 clock gating and light sleep
Signed-off-by: NJack Xiao <Jack.Xiao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Tonga sriov need to use smu to load firmware.
Remove sriov flag because the default return value is zero.
Signed-off-by: NJack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: NTrigger Huang <Trigger.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes SI cards running on amdgpu.

Fixes: 19290598 ("drm/amd/amdgpu: add RLC firmware to support raven1 refresh")
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=110883Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

we need register pm sysfs for virt in order
to support dpm level modification because
smu ip block will not be added under SRIOV

v2: whitespace fixes (Alex)
Signed-off-by: NYintian Tao <yttao@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes SI cards running on amdgpu.

Fixes: 19290598 ("drm/amd/amdgpu: add RLC firmware to support raven1 refresh")
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=110883Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For SR-IOV VF, powerplay may not be supported, in this case,
error '-EINVAL' should not be returned.
Signed-off-by: NTrigger Huang <Trigger.Huang@amd.com>
Reviewed-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use SMU firmware version to indentify the raven1 refresh device and
then load homologous RLC FW.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Suggested-by: Huang Rui<Ray.Huang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Drop use of drmP.h in all files named amdgpu*
in drm/amd/amdgpu/

Fix fallout.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-10-sam@ravnborg.org

Use SMU firmware version to indentify the raven1 refresh device and
then load homologous RLC FW.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Suggested-by: Huang Rui<Ray.Huang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add a file that provides a Unique ID for the GPU.
This will persist across machines and is guaranteed to be unique.
This is only available for GFX9 and newer, so older ASICs will not
have this file in the sysfs pool

v2: Store it in adev for ASICs that don't have a hwmgr
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NKent Russell <kent.russell@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support ppfeatures sysfs interface on Vega20 sw smu routine.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

A new sysfs interface mem_busy_percent is added for telling
how busy the VRAM is(in percentage).
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Expose temp[1-3]_label hwmon interfaces. While temp2_label
and temp3_label are visible for SOC15 dGPUs only.

- V2: correct temp1_label as "edge"
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Two new hwmon interfaces(temp2_input and temp3_input) are added.
They are supported on SOC15 dGPUs only.

- V2: correct thermal sensor output
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These new interfaces(temp1_emergency, temp2_emergency,
temp3_emergency) are supported on SOC15 dGPUs only.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These new interfaces(temp2_crit, temp2_crit_hyst, temp3_crit,
temp3_crit_hyst) are supported on SOC15 dGPUs only.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

profile_exit performance level setting is valid only
when current mode is in profile mode.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

smu.ppt_funcs is only initialized for ASICs supporting SW SMU.

On a Hawaii ASIC, attempting to access the udev attribute
ATTRS{power_dpm_state} will cause a null pointer deref in
amdgpu_get_dpm_state() because of this.

Fix by checking if SW SMU is supported first.
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Under vega10 virtualuzation, smu ip block will not be added.
Therefore, we need add pp clk query and force dpm level function
at amdgpu_virt_ops to support the feature.

v2: add get_pp_clk existence check and use kzalloc to allocate buf

v3: return -ENOMEM for allocation failure and correct the coding style
Signed-off-by: NYintian Tao <yttao@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move pp_feature from the struct of amd_powerplay to amdgpu_device.
Add pp_feature limit for overdrive interface.

v2: put pp_feature into struct amdgpu_pm.
v3: merge feature_mask with pp_feature.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Suggested-by: NAlex Deucher <alexander.deucher@amd.com>
Suggested-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add sys interface to set socclk, fclk and dcefclk for smu.
Add feature_mask parameter for smu_upload_dpm_level as socclk, fclk and
dcefclk have dependency, without feature_mask to point out specific clk
will make it fail to set some clk.
Fix the function of smu_unforce_dpm_levels.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NGui Chengming <Jack.Gui@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add sys interface to get socclk, fclk and dcefclk for smu.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NGui Chengming <Jack.Gui@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add fan1_target set interface to set fan speed for hwmon.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

set the fan1_enable hwmon interface to call
smu_get_fan_control_mode and smu_set_fan_control_mode.

v2: fix print value.
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1, set get_pwm1_enable and set_pwm1_enable functions to call
smu_get_fan_control_mode and smu_set_fan_control_mode for SMU11
2, implement set_fan_control_mode function

v2: add return value in set_fan_control_mode function
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

added main functions:
	get_fan_speed_percent
	set_fan_speed_percent.
added dependent functions:
	smc_fan_control
	set_fan_static_mode
	get_fan_speed_percent

v2: fix coding style issue
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add get_power_limit and set_power_limit functions
to support hwmon for SMU11.

v2: fix the code style issue.
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add fan1_input and fan1_target interface to get fan speed info for hwmon.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

when sw smu is enabled, the powerplay interface isn't implemented.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Unify power stade adjust function into smu_handle_task by the judgment
of task_id.
Move functions which have no relationship with smu version into the file
of amdgpu_smu.
Modified the function of smu_display_config_changed into two part.
Unify some similiar function.

v2: Correct the operation of upload dpm level when force dpm limit value.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>