Functions that play around with the physical memory map
need a way to clear mappings to possibly nonexistent or
invalid memory.  Both the mmu cache and the processor tlb
are cleared.
Signed-off-by: NDor Laor <dor.laor@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

On x86, bit operations operate on a string of bits that can reside in
multiple words.  For example, 'btsl %eax, (blah)' will touch the word
at blah+4 if %eax is between 32 and 63.

The x86 emulator compensates for that by advancing the operand address
by (bit offset / BITS_PER_LONG) and truncating the bit offset to the
range (0..BITS_PER_LONG-1).  This has a side effect of forcing the operand
size to 8 bytes on 64-bit hosts.

Now, a 32-bit guest goes and fork()s a process.  It write protects a stack
page at 0xbffff000 using the 'btr' instruction, at offset 0xffc in the page
table, with bit offset 1 (for the write permission bit).

The emulator now forces the operand size to 8 bytes as previously described,
and an innocent page table update turns into a cross-page-boundary write,
which is assumed by the mmu code not to be a page table, so it doesn't
actually clear the corresponding shadow page table entry.  The guest and
host permissions are out of sync and guest memory is corrupted soon
afterwards, leading to guest failure.

Fix by not using BITS_PER_LONG as the word size; instead use the actual
operand size, so we get a 32-bit write in that case.

Note we still have to teach the mmu to handle cross-page-boundary writes
to guest page table; but for now this allows Damn Small Linux 0.4 (2.4.20)
to boot.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

No longer interesting.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Use list_move() where possible.  Noticed by Dor Laor.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Remove unused function

CC      drivers/kvm/svm.o
drivers/kvm/svm.c:207: warning: ‘inject_db’ defined but not used
Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

When a vcpu is migrated from one cpu to another, its timestamp counter
may lose its monotonic property if the host has unsynced timestamp counters.
This can confuse the guest, sometimes to the point of refusing to boot.

As the rdtsc instruction is rather fast on AMD processors (7-10 cycles),
we can simply record the last host tsc when we drop the cpu, and adjust
the vcpu tsc offset when we detect that we've migrated to a different cpu.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The kvm mmu keeps a shadow page for hugepage pdes; if several such pdes map
the same physical address, they share the same shadow page.  This is a fairly
common case (kernel mappings on i386 nonpae Linux, for example).

However, if the two pdes map the same memory but with different permissions, kvm
will happily use the cached shadow page.  If the access through the more
permissive pde will occur after the access to the strict pde, an endless pagefault
loop will be generated and the guest will make no progress.

Fix by making the access permissions part of the cache lookup key.

The fix allows Xen pae to boot on kvm and run guest domains.

Thanks to Jeremy Fitzhardinge for reporting the bug and testing the fix.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch forbids the guest to execute monitor/mwait instructions on
SVM. This is necessary because the guest can execute these instructions
if they are available even if the kvm cpuid doesn't report its
existence.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Some older (~2.6.7) kernels write MCG_STATUS register during kernel
boot (mce_clear_all() function, called from mce_init()). It's not
currently handled by kvm and will cause it to inject a GPF.
Following patch adds a "nop" handler for this.
Signed-off-by: NSergey Kiselev <sergey.kiselev@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Trivial cleanup.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The cpu cache is a host resource; the guest should not be able to turn
it off (even for itself).
Signed-off-by: NAvi Kivity <avi@qumranet.com>

As usual, we need to mangle segment registers when emulating real mode
as vm86 has specific constraints.  We special case the reset segment base,
and set the "access rights" (or descriptor flags) to vm86 comaptible values.

This fixes reboot on vmx.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The SET_SREGS ioctl modifies both cr0.pe (real mode/protected mode) and
guest segment registers.  Since segment handling is modified by the mode on
Intel procesors, update the segment registers after the mode switch has taken
place.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

set_cr0_no_modeswitch() was a hack to avoid corrupting segment registers.
As we now cache the protected mode values on entry to real mode, this
isn't an issue anymore, and it interferes with reboot (which usually _is_
a modeswitch).
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The reset state has cs.selector == 0xf000 and cs.base == 0xffff0000,
which aren't compatible with vm86 mode, which is used for real mode
virtualization.

When we create a vcpu, we set cs.base to 0xf0000, but if we get there by
way of a reset, the values are inconsistent and vmx refuses to enter
guest mode.

Workaround by detecting the state and munging it appropriately.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The initial, noncaching, version of the kvm mmu flushed the all nonglobal
shadow page table translations (much like a native tlb flush).  The new
implementation flushes translations only when they change, rendering global
pte tracking superfluous.

This removes the unused tracking mechanism and storage space.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

We already special case the pdptr access, so no need to check it again.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The current string pio interface communicates using guest virtual addresses,
relying on userspace to translate addresses and to check permissions.  This
interface cannot fully support guest smp, as the check needs to take into
account two pages at one in case an unaligned string transfer straddles a
page boundary.

Change the interface not to communicate guest addresses at all; instead use
a buffer page (mmaped by userspace) and do transfers there.  The kernel
manages the virtual to physical translation and can perform the checks
atomically by taking the appropriate locks.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Some ioctls ignore their arguments.  By requiring them to be zero now,
we allow a nonzero value to have some special meaning in the future.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This allows us to store offsets in the kernel/user kvm_run area, and be
sure that userspace has them mapped.  As offsets can be outside the
kvm_run struct, userspace has no way of knowing how much to mmap.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Allow a special signal mask to be used while executing in guest mode.  This
allows signals to be used to interrupt a vcpu without requiring signal
delivery to a userspace handler, which is quite expensive.  Userspace still
receives -EINTR and can get the signal via sigwait().
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Older userspace didn't care, but newer userspace (with the cpuid changes)
does.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This is redundant, as we also return -EINTR from the ioctl, but it
allows us to examine the exit_reason field on resume without seeing
old data.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Currently, userspace is told about the nature of the last exit from the
guest using two fields, exit_type and exit_reason, where exit_type has
just two enumerations (and no need for more).  So fold exit_type into
exit_reason, reducing the complexity of determining what really happened.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This is useful for paravirtualized graphics devices, for example.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NAvi Kivity <avi@qumranet.com>

We no longer emulate single instructions in userspace.  Instead, we service
mmio or pio requests.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

KVM used to handle cpuid by letting userspace decide what values to
return to the guest.  We now handle cpuid completely in the kernel.  We
still let userspace decide which values the guest will see by having
userspace set up the value table beforehand (this is necessary to allow
management software to set the cpu features to the least common denominator,
so that live migration can work).

The motivation for the change is that kvm kernel code can be impacted by
cpuid features, for example the x86 emulator.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Currently when passing the a PIO emulation request to userspace, we
rely on userspace updating %rax (on 'in' instructions) and %rsi/%rdi/%rcx
(on string instructions).  This (a) requires two extra ioctls for getting
and setting the registers and (b) is unfriendly to non-x86 archs, when
they get kvm ports.

So fix by doing the register fixups in the kernel and passing to userspace
only an abstract description of the PIO to be done.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Instead of passing a 'struct kvm_run' back and forth between the kernel and
userspace, allocate a page and allow the user to mmap() it.  This reduces
needless copying and makes the interface expandable by providing lots of
free space.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

When auditing a 32-bit guest on a 64-bit host, sign extension of the page
table directory pointer table index caused bogus addresses to be shown on
audit errors.

Fix by declaring the index unsigned.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Use the minor number (232) allocated to kvm by lanana.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Instead of twiddling the rip registers directly, use the
skip_emulated_instruction() function to do that for us.
Signed-off-by: NDor Laor <dor.laor@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The hypercall code mixes up the ->cache_regs() and ->decache_regs()
callbacks, resulting in guest register corruption.
Signed-off-by: NDor Laor <dor.laor@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The Marvell IDE interface on my machine would hit a BUG_ON() in
lib/iomem.c because it was calling ata_pci_init_one() specifying just a
single port on the host, but that would actually end up trying to
initialize two ports, the second one with bogus information.

This fixes "ata_pci_init_one()" so that it actually passes down the
n_ports variable that it got from the low-level driver to the host
allocation routine ("ata_host_alloc_pinfo()"), which results in the ATA
layer actually having the correct port number information.

And in order to make it all work, I also needed to fix a few places that
had incorrectly hard-coded the fact that a host always had exactly two
ports (both ata_pci_init_bmdma() and ata_request_legacy_irqs() would
just always iterate over both ports).
Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Almost all users of pm_ops only support mem sleep, don't check in .valid and
don't reject any others in .prepare so users can be confused if they check
/sys/power/state, especially when new states are added (these would then
result in s-t-r although they're supposed to be something different).

This patch implements a generic pm_valid_only_mem function that is then
exported for users and puts it to use in almost all existing pm_ops.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: NPavel Machek <pavel@ucw.cz>
Cc: linux-pm@lists.linux-foundation.org
Cc: Len Brown <lenb@kernel.org>
Acked-by: NRussell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch allows a name "pppox-proto-nnn" to be used in modprobe.conf
to autoload a PPPoX protocol nnn.
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently we scale the mempool sizes depending on memory installed
in the machine, except for the bio pool itself which sits at a fixed
256 entry pre-allocation.

There's really no point in "optimizing" this OOM path, we just need
enough preallocated to make progress. A single unit is enough, lets
scale it down to 2 just to be on the safe side.

This patch saves ~150kb of pinned kernel memory on a 32-bit box.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Commit 404d5b18 changed the definition
of dev_dbg in the !DEBUG case from being a #define to being a static
inline.  There was code in drivers/ps3/vuart.c to do exactly that,
which fails to compile now.  This fixes it by removing the redefinition,
as the redefinition is now superfluous.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Remove option of making booke_wdt into a kernel module. This watchdog
cannot be disabled. No point being a kernel module.
Signed-off-by: NDave Jiang <djiang@mvista.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>