Remove the now unused helper.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: NSong Liu <song@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The nvdimm block driver abuse revalidate_disk in a strange way, and
totally unrelated to what other drivers do.  Simplify this by just
calling nvdimm_revalidate_disk (which seems rather misnamed) from the
probe routines, as the additional bdev size revalidation is pointless
at this point, and remove the revalidate_disk methods given that
it can only be triggered from add_disk, which is right before the
manual calls.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Instead of calling revalidate_disk just do the work directly by
calling sd_revalidate_disk, and revalidate_disk_size where needed.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Keep control in the NVMe driver instead of going through an indirect
call back into ->revalidate_disk.  Also reorder the function a bit to be
easier to follow with the additional code.

And now that we have removed all callers of revalidate_disk() in the nvme
code, ->revalidate_disk is only called from the open code when first
opening the device.  Which is of course totally pointless as we have
a valid size since the initial scan, and will get an updated view
through the asynchronous notifiation everytime the size changes.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Only virtio_blk and xen-blkfront set the revalidate argument to true,
and both do not implement the ->revalidate_disk method.  So switch
to the helper that just updates the size instead.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

revalidate_disk is a relative awkward helper for driver use, as it first
calls an optional driver method and then updates the block device size,
while most callers either don't need the method call at all, or want to
keep state between the caller and the called method.

Add a revalidate_disk_size helper that just performs the update of the
block device size from the gendisk one, and switch all drivers that do
not implement ->revalidate_disk to use the new helper instead of
revalidate_disk()
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: NSong Liu <song@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Replace bd_invalidate with a new BDEV_NEED_PART_SCAN flag in a bd_flags
variable to better describe the condition.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

bd_invalidated is set by check_disk_change or in add_disk to initiate a
partition scan.  Move it from check_disk_size_change which is called
from both revalidate_disk() and bdev_disk_changed() to only the latter,
as that is what is called from the block device open code (and nbd) to
deal with the bd_invalidated event.  revalidate_disk() on the other hand
is mostly used to propagate a size update from the gendisk to the block
device, which is entirely unrelated.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

unlock_native_capacity is never called from check_disk_change(), and
while revalidate_disk can be called from it, it can also be called
from two other places at the moment.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove a duplicative condition to remove below cppcheck warnings:

"warning: Redundant condition: sched_allow_merge. '!A || (A && B)' is
equivalent to '!A || B' [redundantCondition]"
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If WRITE_ZERO/WRITE_SAME operation is not supported by the storage,
blk_cloned_rq_check_limits() will return IO error which will cause
device-mapper to fail the paths.

Instead, if the queue limit is set to 0, return BLK_STS_NOTSUPP.
BLK_STS_NOTSUPP will be ignored by device-mapper and will not fail the
paths.
Suggested-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NRitika Srivastava <ritika.srivastava@oracle.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Replace returning legacy errno codes with blk_status_t in
blk_cloned_rq_check_limits().
Signed-off-by: NRitika Srivastava <ritika.srivastava@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

CAP_SYS_ADMIN is too broad, and ionice fits into CAP_SYS_NICE's grouping.

Retain CAP_SYS_ADMIN permission for backwards compatibility.
Signed-off-by: NKhazhismel Kumykov <khazhy@google.com>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Acked-by: NSerge Hallyn <serge@hallyn.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

iocost went through significant internal changes. Update iocost_monitor.py
accordingly.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

These are really cheap to collect and can be useful in debugging iocost
behavior. Add them as debug stats for now.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Update and restore the inuse update tracepoints.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When an iocg accumulates too much vtime or gets deactivated, we throw away
some vtime, which lowers the overall device utilization. As the exact amount
which is being thrown away is known, we can compensate by accelerating the
vrate accordingly so that the extra vtime generated in the current period
matches what got lost.

This significantly improves work conservation when involving high weight
cgroups with intermittent and bursty IO patterns.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

A low weight iocg can amass a large amount of debt, for example, when
anonymous memory gets reclaimed aggressively. If the system has a lot of
memory paired with a slow IO device, the debt can span multiple seconds or
more. If there are no other subsequent IO issuers, the in-debt iocg may end
up blocked paying its debt while the IO device is idle.

This patch implements a mechanism to protect against such pathological
cases. If the device has been sufficiently idle for a substantial amount of
time, the debts are halved. The criteria are on the conservative side as we
want to resolve the rare extreme cases without impacting regular operation
by forgiving debts too readily.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Curently, iocost syncs the delay duration to the outstanding debt amount,
which seemed enough to protect the system from anon memory hogs. However,
that was mostly because the delay calcuation was using hweight_inuse which
quickly converges towards zero under debt for delay duration calculation,
often pusnishing debtors overly harshly for longer than deserved.

The previous patch fixed the delay calcuation and now the protection against
anonymous memory hogs isn't enough because the effect of delay is indirect
and non-linear and a huge amount of future debt can accumulate abruptly
while unthrottled.

This patch implements delay hysteresis so that delay is decayed
exponentially over time instead of getting cleared immediately as debt is
paid off. While the overall behavior is similar to the blk-cgroup
implementation used by blk-iolatency, a lot of the details are different and
due to the empirical nature of the mechanism, it's challenging to adapt the
mechanism for one controller without negatively impacting the other.

As the delay is gradually decayed now, there's no point in running it from
its own hrtimer. Periodic updates are now performed from ioc_timer_fn() and
the dedicated hrtimer is removed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Debt handling had several issues.

* How much inuse a debtor carries wasn't clearly defined. inuse would be
  driven down over time from not issuing IOs but it'd be better to clamp it
  to minimum immediately once in debt.

* How much can be paid off was determined by hweight_inuse. As inuse was
  driven down, the payment amount would fall together regardless of the
  debtor's active weight. This means that the debtors were punished harshly.

* ioc_rqos_merge() wasn't calling blkcg_schedule_throttle() after
  iocg_kick_delay().

This patch revamps debt handling so that

* Debt handling owns inuse for iocgs in debt and keeps them at zero.

* Payment amount is determined by hweight_active. This is more deterministic
  and safer than hweight_inuse but still far from ideal in that it doesn't
  factor in possible donations from other iocgs for debt payments. This
  likely needs further improvements in the future.

* iocg_rqos_merge() now calls blkcg_schedule_throttle() as necessary.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When the margin drops below the minimum on a donating iocg, donation is
immediately canceled in full. There are a couple shortcomings with the
current behavior.

* It's abrupt. A small temporary budget deficit can lead to a wide swing in
  weight allocation and a large surplus.

* It's open coded in the issue path but not implemented for the merge path.
  A series of merges at a low inuse can make the iocg incur debts and stall
  incorrectly.

This patch reimplements in-period donation snapbacks so that

* inuse adjustment and cost calculations are factored into
  adjust_inuse_and_calc_cost() which is called from both the issue and merge
  paths.

* Snapbacks are more gradual. It occurs in quarter steps.

* A snapback triggers if the margin goes below the low threshold and is
  lower than the budget at the time of the last adjustment.

* For the above, __propagate_weights() stores the margin in
  iocg->saved_margin. Move iocg->last_inuse storing together into
  __propagate_weights() for consistency.

* Full snapback is guaranteed when there are waiters.

* With precise donation and gradual snapbacks, inuse adjustments are now a
  lot more effective and the value of scaling inuse on weight changes isn't
  clear. Removed inuse scaling from weight_update().
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

iocost has various safety nets to combat inuse adjustment calculation
inaccuracies. With Andy's method implemented in transfer_surpluses(), inuse
adjustment calculations are now accurate and we can make donation amount
determinations accurate too.

* Stop keeping track of past usage history and using the maximum. Act on the
  immediate usage information.

* Remove donation constraints defined by SURPLUS_* constants. Donate
  whatever isn't used.

* Determine the donation amount so that the iocg will end up with
  MARGIN_TARGET_PCT budget at the end of the coming period assuming the same
  usage as the previous period. TARGET is set at 50% of period, which is the
  previous maximum. This provides smooth convergence for most repetitive IO
  patterns.

* Apply donation logic early at 20% budget. There's no risk in doing so as
  the calculation is based on the delta between the current budget and the
  target budget at the end of the coming period.

* Remove preemptive iocg activation for zero cost IOs. As donation can reach
  near zero now, the mere activation doesn't provide any protection anymore.
  In the unlikely case that this becomes a problem, the right solution is
  assigning appropriate costs for such IOs.

This significantly improves the donation determination logic while also
simplifying it. Now all donations are immediate, exact and smooth.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

iocost implements work conservation by reducing iocg->inuse and propagating
the adjustment upwards proportionally. However, while I knew the target
absolute hierarchical proportion - adjusted hweight_inuse, I couldn't figure
out how to determine the iocg->inuse adjustment to achieve that and
approximated the adjustment by scaling iocg->inuse using the proportion of
the needed hweight_inuse changes.

When nested, these scalings aren't accurate even when adjusting a single
node as the donating node also receives the benefit of the donated portion.
When multiple nodes are donating as they often do, they can be wildly wrong.

iocost employed various safety nets to combat the inaccuracies. There are
ample buffers in determining how much to donate, the adjustments are
conservative and gradual. While it can achieve a reasonable level of work
conservation in simple scenarios, the inaccuracies can easily add up leading
to significant loss of total work. This in turn makes it difficult to
closely cap vrate as vrate adjustment is needed to compensate for the loss
of work. The combination of inaccurate donation calculations and vrate
adjustments can lead to wide fluctuations and clunky overall behaviors.

Andy Newell devised a method to calculate the needed ->inuse updates to
achieve the target hweight_inuse's. The method is compatible with the
proportional inuse adjustment propagation which allows all hot path
operations to be local to each iocg.

To roughly summarize, Andy's method divides the tree into donating and
non-donating parts, calculates global donation rate which is used to
determine the target hweight_inuse for each node, and then derives per-level
proportions. There's non-trivial amount of math involved. Please refer to
the following pdfs for detailed descriptions.

  https://drive.google.com/file/d/1PsJwxPFtjUnwOY1QJ5AeICCcsL7BM3bo
  https://drive.google.com/file/d/1vONz1-fzVO7oY5DXXsLjSxEtYYQbOvsE
  https://drive.google.com/file/d/1WcrltBOSPN0qXVdBgnKm4mdp9FhuEFQN

This patch implements Andy's method in transfer_surpluses(). This makes the
donation calculations accurate per cycle and enables further improvements in
other parts of the donation logic.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The way the surplus donation logic is structured isn't great. There are two
separate paths for starting/increasing donations and decreasing them making
the logic harder to follow and is prone to unnecessary behavior differences.

In preparation for improved donation handling, this patch restructures the
code so that

* All donors - new, increasing and decreasing - are funneled through the
  same code path.

* The target donation calculation is factored into hweight_after_donation()
  which is called once from the same spot for all possible donors.

* Actual inuse adjustment is factored into trasnfer_surpluses().

This change introduces a few behavior differences - e.g. donation amount
reduction now uses the max usage of the recent three periods just like new
and increasing donations, and inuse now gets adjusted upwards the same way
it gets downwards. These differences are unlikely to have severely negative
implications and the whole logic will be revamped soon.

This patch also removes two tracepoints. The existing TPs don't quite fit
the new implementation. A later patch will update and reinstate them.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Budget donations are inaccurate and could take multiple periods to converge.
To prevent triggering vrate adjustments while surplus transfers were
catching up, vrate adjustment was suppressed if donations were increasing,
which was indicated by non-zero nr_surpluses.

This entangling won't be necessary with the scheduled rewrite of donation
mechanism which will make it precise and immediate. Let's decouple the two
in preparation.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Instead of marking iocgs with surplus with a flag and filtering for them
while walking all active iocgs, build a surpluses list. This doesn't make
much difference now but will help implementing improved donation logic which
will iterate iocgs with surplus multiple times.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, iocg->usages[] which are used to guide inuse adjustments are
calculated from vtime deltas. This, however, assumes that the hierarchical
inuse weight at the time of calculation held for the entire period, which
often isn't true and can lead to significant errors.

Now that we have absolute usage information collected, we can derive
iocg->usages[] from iocg->local_stat.usage_us so that inuse adjustment
decisions are made based on actual absolute usage. The calculated usage is
clamped between 1 and WEIGHT_ONE and WEIGHT_ONE is also used to signal
saturation regardless of the current hierarchical inuse weight.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, iocost doesn't collect or expose any statistics punting off all
monitoring duties to drgn based iocost_monitor.py. While it works for some
scenarios, there are some usability and data availability challenges. For
example, accurate per-cgroup usage information can't be tracked by vtime
progression at all and the number available in iocg->usages[] are really
short-term snapshots used for control heuristics with possibly significant
errors.

This patch implements per-cgroup absolute usage stat counter and exposes it
through io.stat along with the current vrate. Usage stat collection and
flushing employ the same method as cgroup rstat on the active iocg's and the
only hot path overhead is preemption toggling and adding to a percpu
counter.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, debt handling requires only iocg->waitq.lock. In the future, we
want to adjust and propagate inuse changes depending on debt status. Let's
grab ioc->lock in debt handling paths in preparation.

* Because ioc->lock nests outside iocg->waitq.lock, the decision to grab
  ioc->lock needs to be made before entering the critical sections.

* Add and use iocg_[un]lock() which handles the conditional double locking.

* Add @pay_debt to iocg_kick_waitq() so that debt payment happens only when
  the caller grabbed both locks.

This patch is prepatory and the comments contain references to future
changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The margin handling was pretty inconsistent.

* ioc->margin_us and ioc->inuse_margin_vtime were used as vtime margin
  thresholds. However, the two are in different units with the former
  requiring conversion to vtime on use.

* iocg_kick_waitq() was using a quarter of WAITQ_TIMER_MARGIN_PCT of
  period_us as the timer slack - ~1.2%. While iocg_kick_delay() was using a
  quarter of ioc->margin_us - ~12.5%. There aren't strong reasons to use
  different values for the two.

This patch cleans up margin and timer slack handling:

* vtime margins are now recorded in ioc->margins.{min, max} on period
  duration changes and used consistently.

* Timer slack is now 1% of period_us and recorded in ioc->timer_slack_ns and
  used consistently for iocg_kick_waitq() and iocg_kick_delay().

The only functional change is shortening of timer slack. No meaningful
visible change is expected.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

They are in microseconds and wrap in around 1.2 hours with u32. While
unlikely, confusions from wraparounds are still possible. We aren't saving
anything meaningful by keeping these u32. Let's make them u64.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

To improve weight donations, we want to able to scale inuse with a greater
accuracy and down below 1. Let's make non-hierarchical weights to use
WEIGHT_ONE based fixed point numbers too like hierarchical ones.

This doesn't cause any behavior changes yet.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We're gonna use HWEIGHT_WHOLE for regular weights too. Let's rename it to
WEIGHT_ONE.

Pure rename.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

iocg_kick_waitq() is the function which pays debt and iocg_kick_delay()
updates the actual delay status accordingly. If iocg_kick_delay() is not
called after iocg_kick_delay() updated debt, unnecessarily large delays can
be applied temporarily.

Let's make sure such conditions don't occur by making iocg_kick_waitq()
always call iocg_kick_delay() after paying debt.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We'll make iocg_kick_waitq() call iocg_kick_delay(). Reorder them in
preparation. This is pure code reorganization.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

__propagate_weights() currently expects the callers to clamp inuse within
[1, active], which is needlessly fragile. The inuse adjustment logic is
going to be revamped, in preparation, let's make __propagate_weights() clamp
inuse on entry.

Also, make it avoid weight updates altogether if neither active or inuse is
changed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

It already propagates two weights - active and inuse - and there will be
another soon. Let's drop the confusing misnomers. Rename
[__]propagate_active_weights() to [__]propagate_weights() and
commit_active_weights() to commit_weights().

This is pure rename.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blk-iocost has been reading percpu stat counters from remote cpus which on
some archs can lead to torn reads in really rare occassions. Use local[64]_t
for those counters.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We can trivially derive the gendisk from the hd_struct.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>