1. 25 1月, 2017 6 次提交
    • D
      Merge branch 'stmmac-dwmac-meson8b-configurable-RGMII-TX-delay' · dd8e01fb
      David S. Miller 提交于
      Martin Blumenstingl says:
      
      ====================
      stmmac: dwmac-meson8b: configurable RGMII TX delay
      
      Currently the dwmac-meson8b stmmac glue driver uses a hardcoded 1/4
      cycle (= 2ns) TX clock delay. This seems to work fine for many boards
      (for example Odroid-C2 or Amlogic's reference boards) but there are
      some others where TX traffic is simply broken.
      There are probably multiple reasons why it's working on some boards
      while it's broken on others:
      - some of Amlogic's reference boards are using a Micrel PHY
      - hardware circuit design
      - maybe more...
      
      iperf3 results on my Mecool BB2 board (Meson GXM, RTL8211F PHY) with
      TX clock delay disabled on the MAC (as it's enabled in the PHY driver).
      TX throughput was virtually zero before:
      $ iperf3 -c 192.168.1.100 -R
      Connecting to host 192.168.1.100, port 5201
      Reverse mode, remote host 192.168.1.100 is sending
      [  4] local 192.168.1.206 port 52828 connected to 192.168.1.100 port 5201
      [ ID] Interval           Transfer     Bandwidth
      [  4]   0.00-1.00   sec   108 MBytes   901 Mbits/sec
      [  4]   1.00-2.00   sec  94.2 MBytes   791 Mbits/sec
      [  4]   2.00-3.00   sec  96.5 MBytes   810 Mbits/sec
      [  4]   3.00-4.00   sec  96.2 MBytes   808 Mbits/sec
      [  4]   4.00-5.00   sec  96.6 MBytes   810 Mbits/sec
      [  4]   5.00-6.00   sec  96.5 MBytes   810 Mbits/sec
      [  4]   6.00-7.00   sec  96.6 MBytes   810 Mbits/sec
      [  4]   7.00-8.00   sec  96.5 MBytes   809 Mbits/sec
      [  4]   8.00-9.00   sec   105 MBytes   884 Mbits/sec
      [  4]   9.00-10.00  sec   111 MBytes   934 Mbits/sec
      - - - - - - - - - - - - - - - - - - - - - - - - -
      [ ID] Interval           Transfer     Bandwidth       Retr
      [  4]   0.00-10.00  sec  1000 MBytes   839 Mbits/sec    0             sender
      [  4]   0.00-10.00  sec   998 MBytes   837 Mbits/sec                  receiver
      
      iperf Done.
      $ iperf3 -c 192.168.1.100
      Connecting to host 192.168.1.100, port 5201
      [  4] local 192.168.1.206 port 52832 connected to 192.168.1.100 port 5201
      [ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
      [  4]   0.00-1.01   sec  99.5 MBytes   829 Mbits/sec  117    139 KBytes
      [  4]   1.01-2.00   sec   105 MBytes   884 Mbits/sec  129   70.7 KBytes
      [  4]   2.00-3.01   sec   107 MBytes   889 Mbits/sec  106    187 KBytes
      [  4]   3.01-4.01   sec   105 MBytes   878 Mbits/sec   92    143 KBytes
      [  4]   4.01-5.00   sec   105 MBytes   882 Mbits/sec  140    129 KBytes
      [  4]   5.00-6.01   sec   106 MBytes   883 Mbits/sec  115    195 KBytes
      [  4]   6.01-7.00   sec   102 MBytes   863 Mbits/sec  133   70.7 KBytes
      [  4]   7.00-8.01   sec   106 MBytes   884 Mbits/sec  143   97.6 KBytes
      [  4]   8.01-9.01   sec   104 MBytes   875 Mbits/sec  124    107 KBytes
      [  4]   9.01-10.01  sec   105 MBytes   876 Mbits/sec   90    139 KBytes
      - - - - - - - - - - - - - - - - - - - - - - - - -
      [ ID] Interval           Transfer     Bandwidth       Retr
      [  4]   0.00-10.01  sec  1.02 GBytes   874 Mbits/sec  1189             sender
      [  4]   0.00-10.01  sec  1.02 GBytes   873 Mbits/sec                  receiver
      
      iperf Done.
      
      I get similar TX throughput on my Meson GXBB "MXQ Pro+" board when I
      disable the PHY's TX-delay and configure a 4ms TX-delay on the MAC.
      So changes to at least the RTL8211F PHY driver are needed to get it
      working properly in all situations.
      
      Changes since v4:
      - add a fallback of 2ns (the value which was previously hardcoded) for
        the TX delay so we are backwards-compatible with older .dts'
      - update the documentation with the new fallback value and add a small
        note that the "amlogic,tx-delay" property is ignored when the phy-mode
        is "rmii".
      
      Changes since v3:
      - rebased to apply against current net-next branch (fixes a conflict
        with d2ed0a77 "net: ethernet: stmmac: fix of-node and
        fixed-link-phydev leaks")
      
      Changes since v2:
      - moved all .dts patches (3-7) to a separate series
      - removed the default 2ns TX delay when phy-mode RGMII is specified
      - (rebased against current net-next)
      
      Changes since v1:
      - renamed the devicetree property "amlogic,tx-delay" to
        "amlogic,tx-delay-ns", which makes the .dts easier to read as we can
        simply specify human-readable values instead of having "preprocessor
        defines and calculation in human brain". Thanks to Andrew Lunn for
        the suggestion!
      - improved documentation to indicate when the MAC TX-delay should be
        configured and how to use the PHY's TX-delay
      - changed the default TX-delay in the dwmac-meson8b driver from 2ns
        to 0ms when any of the rgmii-*id modes are used (the 2ns default
        value still applies for phy-mode "rgmii")
      - added patches to properly reset the PHY on Meson GXBB devices and to
        use a similar configuration than the one we use on Meson GXL devices
        (by passing a phy-handle to stmmac and defining the PHY in the mdio0
        bus - patch 3-6)
      - add the "amlogic,tx-delay-ns" property to all boards which are using
        the RGMII PHY (patch 7)
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      dd8e01fb
    • M
      net: stmmac: dwmac-meson8b: make the RGMII TX delay configurable · b765234e
      Martin Blumenstingl 提交于
      Prior to this patch we were using a hardcoded RGMII TX clock delay of
      2ns (= 1/4 cycle of the 125MHz RGMII TX clock). This value works for
      many boards, but unfortunately not for all (due to the way the actual
      circuit is designed, sometimes because the TX delay is enabled in the
      PHY, etc.). Making the TX delay on the MAC side configurable allows us
      to support all possible hardware combinations.
      
      This allows fixing a compatibility issue on some boards, where the
      RTL8211F PHY is configured to generate the TX delay. We can now turn
      off the TX delay in the MAC, because otherwise we would be applying the
      delay twice (which results in non-working TX traffic).
      Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
      Tested-by: NNeil Armstrong <narmstrong@baylibre.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b765234e
    • M
      net: dt-bindings: add RGMII TX delay configuration to meson8b-dwmac · d5490f1f
      Martin Blumenstingl 提交于
      This allows configuring the RGMII TX clock delay. The RGMII clock is
      generated by underlying hardware of the the Meson 8b / GXBB DWMAC glue.
      The configuration depends on the actual hardware (no delay may be
      needed due to the design of the actual circuit, the PHY might add this
      delay, etc.).
      Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
      Tested-by: NNeil Armstrong <narmstrong@baylibre.com>
      Acked-by: NRob Herring <robh@kernel.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d5490f1f
    • A
      net: dsa: Fix inverted test for multiple CPU interface · 23e3d618
      Andrew Lunn 提交于
      Remove the wrong !, otherwise we get false positives about having
      multiple CPU interfaces.
      
      Fixes: b22de490 ("net: dsa: store CPU switch structure in the tree")
      Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
      Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      23e3d618
    • F
      bridge: multicast to unicast · 6db6f0ea
      Felix Fietkau 提交于
      Implements an optional, per bridge port flag and feature to deliver
      multicast packets to any host on the according port via unicast
      individually. This is done by copying the packet per host and
      changing the multicast destination MAC to a unicast one accordingly.
      
      multicast-to-unicast works on top of the multicast snooping feature of
      the bridge. Which means unicast copies are only delivered to hosts which
      are interested in it and signalized this via IGMP/MLD reports
      previously.
      
      This feature is intended for interface types which have a more reliable
      and/or efficient way to deliver unicast packets than broadcast ones
      (e.g. wifi).
      
      However, it should only be enabled on interfaces where no IGMPv2/MLDv1
      report suppression takes place. This feature is disabled by default.
      
      The initial patch and idea is from Felix Fietkau.
      Signed-off-by: NFelix Fietkau <nbd@nbd.name>
      [linus.luessing@c0d3.blue: various bug + style fixes, commit message]
      Signed-off-by: NLinus Lüssing <linus.luessing@c0d3.blue>
      Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6db6f0ea
    • K
      Introduce a sysctl that modifies the value of PROT_SOCK. · 4548b683
      Krister Johansen 提交于
      Add net.ipv4.ip_unprivileged_port_start, which is a per namespace sysctl
      that denotes the first unprivileged inet port in the namespace.  To
      disable all privileged ports set this to zero.  It also checks for
      overlap with the local port range.  The privileged and local range may
      not overlap.
      
      The use case for this change is to allow containerized processes to bind
      to priviliged ports, but prevent them from ever being allowed to modify
      their container's network configuration.  The latter is accomplished by
      ensuring that the network namespace is not a child of the user
      namespace.  This modification was needed to allow the container manager
      to disable a namespace's priviliged port restrictions without exposing
      control of the network namespace to processes in the user namespace.
      Signed-off-by: NKrister Johansen <kjlx@templeofstupid.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4548b683
  2. 24 1月, 2017 10 次提交
    • D
      bpf, lpm: fix kfree of im_node in trie_update_elem · d140199a
      Daniel Borkmann 提交于
      We need to initialize im_node to NULL, otherwise in case of error path
      it gets passed to kfree() as uninitialized pointer.
      
      Fixes: b95a5c4d ("bpf: add a longest prefix match trie map implementation")
      Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: NAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d140199a
    • D
      Merge branch 'bpf-lpm' · 2acc76cb
      David S. Miller 提交于
      Daniel Mack says:
      
      ====================
      bpf: add longest prefix match map
      
      This patch set adds a longest prefix match algorithm that can be used
      to match IP addresses to a stored set of ranges. It is exposed as a
      bpf map type.
      
      Internally, data is stored in an unbalanced tree of nodes that has a
      maximum height of n, where n is the prefixlen the trie was created
      with.
      
      Note that this has nothing to do with fib or fib6 and is in no way meant
      to replace or share code with it. It's rather a much simpler
      implementation that is specifically written with bpf maps in mind.
      
      Patch 1/2 adds the implementation, 2/2 an extensive test suite and 3/3
      has benchmarking code for the new trie type.
      
      Feedback is much appreciated.
      
      Changelog:
      
      v3 -> v4:
      	* David added a 3rd patch that augments map_perf_test for
      	  LPM trie benchmarks
      	* Limit allocation of maps of this new type to CAP_SYS_ADMIN
      	  for now, as requested by Alexei
      	* Add a stub .map_delete_elem so the core does not stumble
      	  over a NULL pointer when the syscall is invoked
      	* Tests for non-power-of-2 prefix lengths were added
      	* More comment style fixes
      
      v2 -> v3:
      	* Store both the key match data and the caller provided
      	  value in the same byte array attached to a node. This
      	  avoids double allocations
      	* Bring back node->flags to distinguish between 'real'
      	  and intermediate nodes
      	* Fix comment style and some typos
      
      v1 -> v2:
      	* Turn spin lock into raw spinlock
      	* Lock with irqsave options during trie_update_elem()
      	* Return -ENOMEM properly from trie_alloc()
      	* Force attr->flags == BPF_F_NO_PREALLOC during creation
      	* Set trie->map.pages after creation to account for map memory
      	* Allow arbitrary value sizes
      	* Removed node->flags and denode intermediate nodes through
      	  node->value == NULL instead
      
      rfc -> v1:
      	* Add __rcu pointer annotations to make sparse happy
      	* Fold _lpm_trie_find_target_node() into its only caller
      	* Fix some minor documentation issues
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2acc76cb
    • D
      samples/bpf: add lpm-trie benchmark · b8a943e2
      David Herrmann 提交于
      Extend the map_perf_test_{user,kern}.c infrastructure to stress test
      lpm-trie lookups. We hook into the kprobe on sys_gettid() and measure
      the latency depending on trie size and lookup count.
      
      On my Intel Haswell i7-6400U, a single gettid() syscall with an empty
      bpf program takes roughly 6.5us on my system. Lookups in empty tries
      take ~1.8us on first try, ~0.9us on retries. Lookups in tries with 8192
      entries take ~7.1us (on the first _and_ any subsequent try).
      Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
      Reviewed-by: NDaniel Mack <daniel@zonque.org>
      Acked-by: NAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b8a943e2
    • D
      bpf: Add tests for the lpm trie map · 4d3381f5
      David Herrmann 提交于
      The first part of this program runs randomized tests against the
      lpm-bpf-map. It implements a "Trivial Longest Prefix Match" (tlpm)
      based on simple, linear, single linked lists. The implementation
      should be pretty straightforward.
      
      Based on tlpm, this inserts randomized data into bpf-lpm-maps and
      verifies the trie-based bpf-map implementation behaves the same way
      as tlpm.
      
      The second part uses 'real world' IPv4 and IPv6 addresses and tests
      the trie with those.
      Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
      Signed-off-by: NDaniel Mack <daniel@zonque.org>
      Acked-by: NAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4d3381f5
    • D
      bpf: add a longest prefix match trie map implementation · b95a5c4d
      Daniel Mack 提交于
      This trie implements a longest prefix match algorithm that can be used
      to match IP addresses to a stored set of ranges.
      
      Internally, data is stored in an unbalanced trie of nodes that has a
      maximum height of n, where n is the prefixlen the trie was created
      with.
      
      Tries may be created with prefix lengths that are multiples of 8, in
      the range from 8 to 2048. The key used for lookup and update operations
      is a struct bpf_lpm_trie_key, and the value is a uint64_t.
      
      The code carries more information about the internal implementation.
      Signed-off-by: NDaniel Mack <daniel@zonque.org>
      Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
      Acked-by: NAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b95a5c4d
    • B
      net: xilinx: constify net_device_ops structure · 10eeb5e6
      Bhumika Goyal 提交于
      Declare net_device_ops structure as const as it is only stored in
      the netdev_ops field of a net_device structure. This field is of type
      const, so net_device_ops structures having same properties can be made
      const too.
      Done using Coccinelle:
      
      @r1 disable optional_qualifier@
      identifier i;
      position p;
      @@
      static struct net_device_ops i@p={...};
      
      @ok1@
      identifier r1.i;
      position p;
      struct net_device ndev;
      @@
      ndev.netdev_ops=&i@p
      
      @bad@
      position p!={r1.p,ok1.p};
      identifier r1.i;
      @@
      i@p
      
      @depends on !bad disable optional_qualifier@
      identifier r1.i;
      @@
      +const
      struct net_device_ops i;
      
      File size before:
         text	   data	    bss	    dec	    hex	filename
         6201	    744	      0	   6945	   1b21 ethernet/xilinx/xilinx_emaclite.o
      
      File size after:
         text	   data	    bss	    dec	    hex	filename
         6745	    192	      0	   6937	   1b19 ethernet/xilinx/xilinx_emaclite.o
      Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      10eeb5e6
    • B
      net: moxa: constify net_device_ops structures · 30bd2f52
      Bhumika Goyal 提交于
      Declare net_device_ops structure as const as it is only stored in
      the netdev_ops field of a net_device structure. This field is of type
      const, so net_device_ops structures having same properties can be made
      const too.
      Done using Coccinelle:
      
      @r1 disable optional_qualifier@
      identifier i;
      position p;
      @@
      static struct net_device_ops i@p={...};
      
      @ok1@
      identifier r1.i;
      position p;
      struct net_device ndev;
      @@
      ndev.netdev_ops=&i@p
      
      @bad@
      position p!={r1.p,ok1.p};
      identifier r1.i;
      @@
      i@p
      
      @depends on !bad disable optional_qualifier@
      identifier r1.i;
      @@
      +const
      struct net_device_ops i;
      
      File size before:
         text	   data	    bss	    dec	    hex	filename
         4821	    744	      0	   5565	   15bd ethernet/moxa/moxart_ether.o
      
      File size after:
         text	   data	    bss	    dec	    hex	filename
         5373	    192	      0	   5565	   15bd ethernet/moxa/moxart_ether.o
      Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      30bd2f52
    • T
      net: qcom/emac: claim the irq only when the device is opened · 4404323c
      Timur Tabi 提交于
      During reset, functions emac_mac_down() and emac_mac_up() are called,
      so we don't want to free and claim the IRQ unnecessarily.  Move those
      operations to open/close.
      Signed-off-by: NTimur Tabi <timur@codeaurora.org>
      Reviewed-by: NLino Sanfilippo <LinoSanfilippo@gmx.de>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4404323c
    • T
      net: qcom/emac: rename emac_phy to emac_sgmii and move it · 41c1093f
      Timur Tabi 提交于
      The EMAC has an internal PHY that is often called the "SGMII".  This
      SGMII is also connected to an external PHY, which is managed by phylib.
      These dual PHYs often cause confusion.  In this case, the data structure
      for managing the SGMII was mis-named and located in the wrong header file.
      
      Structure emac_phy is renamed to emac_sgmii to clearly indicate it applies
      to the internal PHY only.  It also also moved from emac_phy.h (which
      supports the external PHY) to emac_sgmii.h (where it belongs).
      
      To keep the changes minimal, only the structure name is changed, not
      the names of any variables of that type.
      Signed-off-by: NTimur Tabi <timur@codeaurora.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      41c1093f
    • E
      bnx2x: avoid two atomic ops per page on x86 · b9032741
      Eric Dumazet 提交于
      Commit 4cace675 ("bnx2x: Alloc 4k fragment for each rx ring buffer
      element") added extra put_page() and get_page() calls on arches where
      PAGE_SIZE=4K like x86
      
      Reorder things to avoid this overhead.
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Cc: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
      Cc: Yuval Mintz <Yuval.Mintz@cavium.com>
      Cc: Ariel Elior <ariel.elior@cavium.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b9032741
  3. 23 1月, 2017 15 次提交
  4. 21 1月, 2017 9 次提交