- 17 2月, 2014 4 次提交
-
-
由 Florian Fainelli 提交于
Document the required "clocks" phandles and their corresponding "clock-names" properties for the two clocks used by the GENET hardware block ("enet" and "enet-wol"). CC: Mark Rutland <mark.rutland@arm.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
I commit e099e86c ("tipc: add node_lock protection to link lookup function") we are calling spin_lock(&node->lock) directly instead of indirectly via the tipc_node_lock(node) function. However, tipc_node_lock() is using spin_lock_bh(), not spin_lock(), something leading to unbalanced usage in one place, and a smatch warning. We fix this by consistently using tipc_node_lock()/unlock() in in the places touched by the mentioned commit. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
In commit 7d33939f ("tipc: delay delete of link when failover is needed") we introduced a loop for finding and removing a link pointer in an array. The removal is done after we have left the loop, giving the impression that one may remove the wrong pointer if no matching element is found. This is not really a bug, since we know that there will always be a matching element, but it looks wrong, and causes a smatch warning. We fix this loop with this commit. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
Currently this always returns ENOBUFS, because the return value of __ip_tunnel_create is discarded. A more common failure is a duplicate name (EEXIST). Propagate the real error code so userspace can display a more meaningful error message. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 2月, 2014 13 次提交
-
-
由 WANG Cong 提交于
Openvswitch defines u64_stats_sync as ->sync rather than ->syncp, so fails to compile with netdev_alloc_pcpu_stats(). So just rename it to ->syncp. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Fixes: 1c213bd2 (net: introduce netdev_alloc_pcpu_stats() for drivers) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Reviewed-by: NFlavio Leitner <fbl@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Yufen 提交于
Signed-off-by: NWang Yufen <wangyufen@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Yufen 提交于
Signed-off-by: NWang Yufen <wangyufen@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Yufen 提交于
Signed-off-by: NWang Yufen <wangyufen@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Yufen 提交于
Signed-off-by: NWang Yufen <wangyufen@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Yufen 提交于
Signed-off-by: NWang Yufen <wangyufen@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Yufen 提交于
Signed-off-by: NWang Yufen <wangyufen@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 wangweidong 提交于
checkpatch error: switch and case should be at the same indent. Signed-off-by: NWang Weidong <wangweidong1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 wangweidong 提交于
fix checkpatch errors below: ERROR: "foo* bar" should be "foo *bar" ERROR: "foo * bar" should be "foo *bar" Signed-off-by: NWang Weidong <wangweidong1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 wangweidong 提交于
fix checkpatch errors while the space is required or prohibited Signed-off-by: NWang Weidong <wangweidong1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Add two new fields to struct tcp_info, to report sk_pacing_rate and sk_max_pacing_rate to monitoring applications, as ss from iproute2. User exported fields are 64bit, even if kernel is currently using 32bit fields. lpaa5:~# ss -i .. skmem:(r0,rb357120,t0,tb2097152,f1584,w1980880,o0,bl0) ts sack cubic wscale:6,6 rto:400 rtt:0.875/0.75 mss:1448 cwnd:1 ssthresh:12 send 13.2Mbps pacing_rate 3336.2Mbps unacked:15 retrans:1/5448 lost:15 rcv_space:29200 Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
There are many drivers calling alloc_percpu() to allocate pcpu stats and then initializing ->syncp. So just introduce a helper function for them. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Remove one inline keyword, and no need for a loop to find an index into a table. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 2月, 2014 23 次提交
-
-
由 David S. Miller 提交于
Florian Fainelli says: ==================== Support for the Broadcom GENET driver This patchset adds support for the Broadcom GENET Gigabit Ethernet MAC controller. This controller is found on the Broadcom BCM7xxx Set Top Box System-on-a-chips. Changes since v4: - add dependency on CONFIG_OF Changes since v3: - fixed Kconfig dependency on FIXED_PHY Changes since v2: - dropped the patch that adds an "internal" phy-mode ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Add myself as a maintainer of the Broadcom GENET driver. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
This patch adds the Device Tree bindings for the Broadcom GENET Gigabit Ethernet controller. A bunch of examples are provided to illustrate the versatile aspect of the hardare. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
This patch adds a new configuration symbol: CONFIG_BCMGENET which allows us to build the Broadcom GENET driver and hook the driver files into the build system. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
This patch adds support for configuring the port multiplexer hardware which resides in front of the GENET Ethernet MAC controller. This allows us to support: - internal PHYs (using drivers/net/phy/bcm7xxx.c) - MoCA PHYs which are an entirely separate hardware block not covered here - external PHYs and switches Note that MoCA and switches are currently supported using the emulated "fixed PHY" driver. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
This patch adds the BCMGENET main driver file which supports the following: - GENET hardware from V1 to V4 - support for reading the UniMAC MIB counters statistics - support for the 5 transmit queues - support for RX/TX checksum offload and SG Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
This patchs adds the bcmgenet.h header file which contains all the hardware definitions for the GENETv1 to v4 hardware blocks as well as the driver private structure and MIB counters. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
This patch adds support for the Broadcom BCM7xxx Set Top Box SoCs internal PHYs. This driver supports the following generation of SoCs: - BCM7366, BCM7439, BCM7445 (28nm process) - all 40nm and 65nm (older MIPS-based SoCs) The PHYs on these SoCs require a bunch of workarounds to operate correctly, both during configuration time and at suspend/resume time, the driver handles that for us. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
The Broadcom BCM54xx register definitions are shared between BCM54xx and BCM7xx internal PHYs for which we are adding support. Extract these register definitions and put them in include/linux/brcmphy.h for use by the BCM7xxx internal PHY driver. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
MoCA PHYs are using coaxial (BNC-like) connectors, update the transceiver port type when replying to ethtool. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Some Ethernet MACs are connected to a MoCA PHY which will handle the low-level job of sending Ethernet frames on the coaxial cable, these Ethernet MACs need to know about it to be properly configured. Add a new PHY mode "moca" and update the Device Tree parsing logic to look for it. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yang Yingliang 提交于
Replace some magic numbers which describe states of GE model loss generator with enumerate. Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yang Yingliang 提交于
In netem_change(), we have already get "struct netem_sched_data *q". Replace params of get_correlation() and other similar functions with "struct netem_sched_data *q". Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yang Yingliang 提交于
get_dist_table() and get_loss_clg() may be failed. These two functions should be called after setting the members of qdisc_priv(sch), or it will break the old settings while either of them is failed. Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Kirjanov 提交于
Packets which have L2 address different from ours should be already filtered before entering into ip_forward(). Perform that check at the beginning to avoid processing such packets. Signed-off-by: NDenis Kirjanov <kda@linux-powerpc.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
One of my pet coding style peeves is the practice of adding extra return; at the end of function. Kill several instances of this in network code. I suppose some coccinelle wizardy could do this automatically. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislav Fomichev 提交于
Commit 684bad11 "tcp: use PRR to reduce cwin in CWR state" removed all calls to min_cwnd, so we can safely remove it. Also, remove tcp_reno_min_cwnd because it was only used for min_cwnd. Signed-off-by: NStanislav Fomichev <stfomichev@yandex-team.ru> Acked-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
Currently multi-channel configuration is read via the QUERY_FW_CONFIG cmd. This method has been deprecated by the Skyhawk-R FW. Instead, GET_PROFILE_CONFIG::port-desc must be used to query this configuration. This patch also: a) introduces a few macros to identify certain categories of multi-channel configs 2) re-factors the be_cmd_set_profile_config() code to be able to read any kind of desc (and not just the nic-desc.) Signed-off-by: NVasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NSomnath Kotur <somnath.kotur@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
Signed-off-by: NVasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NSomnath Kotur <somnath.kotur@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Somnath Kotur 提交于
This patch logs a kernel message when a HW error(SLIPORT_ERROR in Lancer and UE in BEx/Skyhawk) is detected. The log message for BE3 was missing earlier. This patch also refactors the code by segregating error-detection and reporting code for Lancer and BEx/SH. Signed-off-by: NSomnath Kotur <somnath.kotur@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://gitorious.org/linux-can/linux-can-next由 David S. Miller 提交于
linux-can-next-for-3.15-20140212 Marc Kleine-Budde says: ==================== this is a pull request of eight patches for net-next/master. Florian Vaussard contributed a series that merged the sja1000 of_platform into the platform driver. The of_platform driver is finally removed. Stephane Grosjean supplied a patch to allocate CANFD skbs. In a patch by Uwe Kleine-König another missing copyright information was added to a userspace header. And a patch by Yoann DI RUZZA that adds listen only mode to the at91_can driver. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yang Yingliang 提交于
Prefer pr_*(...) to printk(KERN_* ...). Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
The driver #define's and uses ETHERSMALL macro for the minimum Ethernet frame size for which we have a standard macro ETH_ZLEN. Use the latter instead of the home-grown one. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-