This patch enables the debugfs user to configure an FTM responder
with the appropriate control channel position.
Signed-off-by: NAssaf Krauss <assaf.krauss@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>

Those timeouts are used for AM-to-PSM transition.
We already have those pairs defined for default and WOWLAN use cases.
We expect that by using shorter threshold for low latency P2P,
e.g. for Miracast video scenario, we might save a considerable amount of power.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NAvri Altman <avri.altman@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>

In "hostless" mode (D3 or D0i3) the same parameters were intended
to be used, but the code doesn't do that properly. Fix it.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NAvri Altman <avri.altman@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>

Since the 8000 series, the DTS measurement request command has been
changed. Use an ucode capability flag to determine which version is
supported and send the extended command when needed.
Signed-off-by: NArik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>

The hardware bug in the commit mentioned below forces us
not to re-enable the clock gating in the Host Cluster.
The impact on the power consumption is minimal and it allows
the WAKE_ME interrupt to propagate.

CC: <stable@vger.kernel.org> [4.1+]
Fixes: c9fdec9f ("iwlwifi: pcie: fix prepare card flow")
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>

When paging is enabled the driver stores part of the FW's
image in the DRAM.

Dump FW's virtual image in the case of a NIC error.
Signed-off-by: NGolan Ben-Ami <golan.ben.ami@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>

Remove an old workaround that's no longer needed and
enable MIMO on P2P interfaces.
Signed-off-by: NAlexander Bondar <alexander.bondar@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>

Group station statistics by where they're (mostly) updated
(TX, RX and TX-status) and group them into sub-structs of
the struct sta_info.

Also rename the variables since the grouping now makes it
obvious where they belong.

This makes it easier to identify where the statistics are
updated in the code, and thus easier to think about them.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

There's little point in keeping (and even sending to userspace)
the beacon_loss_count value per station, since it can only apply
to the AP on a managed-mode connection. Move the value to ifmgd,
advertise it only in managed mode, and remove it from ethtool as
it's available through better interfaces.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This file only feeds a debugfs file that isn't very useful, so remove
it. If necessary, we can add other ways to get this information, for
example in the NL80211_CMD_PROBE_CLIENT response.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The return type should be enum reg_request_treatment for both
branches of the #ifdef.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The function is void and static, so just ifdef its contents
instead of duplicating the declaration.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Printing "N/A mBi" is strange - print just "N/A" instead.

Also add a missing opening parenthesis.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Instead of having a lot of places that free ignored requests
and then return REG_REQ_OK, make reg_process_hint() process
REG_REQ_IGNORE by freeing the request, and let functions it
calls return that instead of freeing.

This also fixes a leak when a second (different) country IE
hint was ignored.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This function can only deal with treatment values OK and ALREADY_SET
so make the callees not return anything else and warn if they do.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The new name better reflects the functionality.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

If there's a built-in regulatory database, there may be little point
in also calling out to CRDA and failing if the system is configured
that way. Allow removing CRDA support to save ~1K kernel size.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

When the functions reg_set_rd_driver() and reg_set_rd_country_ie()
return with an error, the calling function already restores data
by calling restore_regulatory_settings(), so there's no need to
also schedule a timeout (which would lead to other side effects
such as indicating CRDA failed, which clearly isn't true.) Remove
the scheduling.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Instead of searching the built-in database only in the worker,
search it directly and return an error if the entry cannot be
found (or memory cannot be allocated.) This means that builtin
database queries no longer rely on the timeout.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The new name is more appropriate since in the case of a built-in
database it may not really rely on CRDA.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The function reg_call_crda() can't actually validly return
REG_REQ_IGNORE as it does now when calling CRDA fails since
that return value isn't handled properly. Fix that.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

There's no way that the alpha2 pointer can be NULL, so
no point in checking that it isn't.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

There's no "g" prefix, only "G" (1e9) that was clearly intended here.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

That file contains just a single function, which itself is just a
single statement to call a different function. Remove it.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The file contains just a single declaration that can easily
move to another file - remove it.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

There's only a single caller of this function, so it can
be moved to the same file and made static.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Reduce indentation a bit to make the condition more readable.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

As this API has never really seen any use and most drivers don't
ever use the value derived from it, remove it.

Change the only driver using it (rt2x00) to simply use the DTIM
period instead of the "max sleep" time.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The new API is more easily extensible with a metadata struct
passed to it, use it in mac80211.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

If multiple scan plans were set for scheduled scan, do not restart
scheduled scan on reconfig because it is possible that some scan
plans were already completed and there is no need to run them all
over again. Instead, notify userspace that scheduled scan stopped
so it can configure new scan plans for scheduled scan.
Signed-off-by: NAvraham Stern <avraham.stern@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Add the option to configure multiple 'scan plans' for scheduled scan.
Each 'scan plan' defines the number of scan cycles and the interval
between scans. The scan plans are executed in the order they were
configured. The last scan plan will always run infinitely and thus
defines only the interval between scans.
The maximum number of scan plans supported by the device and the
maximum number of iterations in a single scan plan are advertised
to userspace so it can configure the scan plans appropriately.

When scheduled scan results are received there is no way to know which
scan plan is being currently executed, so there is no way to know when
the next scan iteration will start. This is not a problem, however.
The scan start timestamp is only used for flushing old scan results,
and there is no difference between flushing all results received until
the end of the previous iteration or the start of the current one,
since no results will be received in between.
Signed-off-by: NAvraham Stern <avraham.stern@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Add the WNM and unprotected WNM categories and mark the latter
as not robust.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Unprotected DMG and VHT action frames are not protected, reflect
that in the list.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

For location and connectivity services, userspace would often like
to know the time when the BSS was last seen. The current "last seen"
value is calculated in a way that makes it less useful, especially
if the system suspended in the meantime.

Add the ability for the driver to report a real CLOCK_BOOTTIME stamp
that can then be reported to userspace (if present).

Drivers wishing to use this must be converted to the new API to call
cfg80211_inform_bss_data() or cfg80211_inform_bss_frame_data(). They
need to ensure the reported value is accurate enough even when the
frame might have been buffered in the device (e.g. firmware.)
Signed-off-by: NDmitry Shmidt <dimitrysh@google.com>
[modified to use struct, inlines]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This reverts commit 5c48f120.

Some device drivers (ath10k) offload part of aggregation including AddBA/DelBA
negotiations to firmware. In such scenario, the PMF configuration of
the station needs to be provided to driver to enable encryption of
AddBA/DelBA action frames.
Signed-off-by: NTamizh chelvam <c_traja@qti.qualcomm.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Merge net-next to get some driver changes that patches depend
on (in order to avoid conflicts).
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Currently it's possible for someone to send a vlan range to the kernel
with the pvid flag set which will result in the pvid bouncing from a
vlan to vlan and isn't correct, it also introduces problems for hardware
where it doesn't make sense having more than 1 pvid. iproute2 already
enforces this, so let's enforce it on kernel-side as well.
Reported-by: NElad Raz <eladr@mellanox.com>
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a smatch warning:
drivers/atm/iphase.c:1178 rx_pkt() warn: curly braces intended?

The code is correct, the indention is misleading. In case the allocation
of skb fails, we want to skip to the end.
Signed-off-by: NTillmann Heidsieck <theidsieck@leenox.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Smatch complains about returning hard coded error codes, silence this
warning.

drivers/atm/iphase.c:115 ia_enque_rtn_q() warn: returning -1 instead of -ENOMEM is sloppy
Signed-off-by: NTillmann Heidsieck <theidsieck@leenox.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>