- Aligning to block size should ensure that the extra size is enough.
- Using roundup, because not all sizes are powers of two.
Signed-off-by: NMaarten Maathuis <madman2003@gmail.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>

struct fb_fillrect->color is not a color, but index into pseudo_palette
array
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Should fix dim panel issues reported on Dell M6400/M6500.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>

This partially reverts e4b41066, as this driver is intended to be
useful with any KMS driver for suitable hardware. The missing build
dependency that commit workarounded was DRM_KMS_HELPER.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>

This commit has also the following 3 bugfix commits squashed into it from
the nouveau git tree:

drm/nouveau: Fix up the tiling alignment restrictions for nv1x.
drm/nouveau: Fix up the nv2x tiling alignment restrictions.
drm/nv50: fix align typo for g9x
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>

Lots of ppl keep thinking this is an oops, it was just a warning for
me to see, just make it a printk now.
Signed-off-by: NDave Airlie <airlied@redhat.com>

If userspace (plymouth in this case) asks for a deeper depth,
refuse it as well due to lack of resizing.

This fixes an issue since < 32MB cards went to 8bpp and plymouth
crashes on startup.
Signed-off-by: NDave Airlie <airlied@redhat.com>

With the current DRM code, an output that has been powered off
from userspace will automatically power back on when resuming
from suspend. This patch fixes this behaviour.

Tested only with the Intel i915 driver on an Intel GM45 Express
chipset.
Signed-off-by: NDavid John <davidjon@xenontk.org>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

* korg/drm-radeon-next:
  drm/radeon/kms: rs600: use correct mask for SW interrupt
  gpu/drm/radeon/radeon_irq.c: move a dereference below a NULL test
  drm/radeon/radeon_device.c: move a dereference below a NULL test
  drm/radeon/radeon_fence.c: move a dereference below the NULL test
  drm/radeon/radeon_connectors.c: add a NULL test before dereference
  drm/radeon/kms: fix memory leak
  drm/radeon/kms: add missing breaks in i2c and ss lookups
  drm/radeon/kms: add primary dac adj values table
  drm/radeon/kms: fallback to default connector table

The mask happens to be the same, but the IH is reading the status, not the
not the control register.
Signed-off-by: NLuca Tettamanti <kronos.it@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If a NULL value is possible, the dereference should only occur after the
NULL test.

Coverity CID: 13338
Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If a NULL value is possible, the dereference should only occur after the
NULL test.

Coverity CID: 13335
Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If a NULL value is possible, the dereference should only occur after the
NULL test.

Coverity CID: 13334
Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The encoder variable can be NULL in this function so I believe it should
be checked before dereference.

Coverity CID: 13253

[airlied: extremely unlikely to happen]
Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Stanse found a memory leak in radeon_master_create. master_priv is not
freed/assigned on all paths. Fix that.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NDave Airlie <airlied@redhat.com>

* drm-core-next:
  drm/kms: Fix &&/|| confusion in drm_fb_helper_connector_parse_command_line()
  drm/edid: Fix CVT width/height decode
  drm/edid: Skip empty CVT codepoints
  drm: remove address mask param for drm_pci_alloc()

This always evaluates to true.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

drm_pci_alloc() has input of address mask for setting pci dma
mask on the device, which should be properly setup by drm driver.
And leave it as a param for drm_pci_alloc() would cause confusion
or mistake would corrupt the correct dma mask setting, as seen on
intel hw which set wrong dma mask for hw status page. So remove
it from drm_pci_alloc() function.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Should fix fdo bug 25741
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Look up primary dac adj values from the table if
there is no bios or bios dac table to reference.

The lookup table may need to be adjusted for certain
families.

Should fix kernel bug 14945.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

if necessary for combios

Some early combios radeon cards don't have a connector
table or dac table in the bios, if they do not, fallback
to the default tables.

Should fix kernel bug 14963.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

* korg/drm-radeon-next:
  drm/radeon/kms: add definitions for v4 power tables
  drm/radeon/kms: never combine LVDS with another encoder
  drm/radeon/kms: Check module arguments to be valid V2
  drm/radeon/kms: Avoid crash when trying to cleanup uninitialized structure
  drm/radeon/kms: add cvt mode if we only have lvds w/h and no edid (v4)
  drm/radeon/kms: add 3DC compression support
  drm/radeon/kms: allow rendering while no colorbuffer is set on r300
  drm/radeon/kms: enable memory clock reading on legacy (V2)
  drm/radeon/kms: prevent parallel AtomBIOS calls
  drm/radeon/kms: set proper default tv standard
  drm/radeon/kms: fix legacy rmx
  drm/radeon/kms/atom: fill in proper defines for digital setup

[airlied: just adding this for completeness to avoid drift between
public atombios.h files]
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

When linking multiple encoders to a connector, make sure
to not link LVDS with another connector.  Some bioses
have the same i2c line for LVDS and VGA.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This patch add a function which check module argument to be
valid. On invalid argument it prints a warning and setback
the default value.

V2: Allow 0 for vram limit & agp mode which are the default
value
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Add boolean to record if some part of the driver are initialized or
not this allow to avoid a crash when trying to cleanup uninitialized
structure members.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This fixes LVDS on some mac laptops without a panel edid.

v2 - Set proper mode type flags
v3 - Note that this is not neceesarily the exact panel mode,
but an approximation based on the cvt formula.  For these
systems we should ideally read the mode info out of the
registers or add a mode table, but this works and is much
simpler.
v4 - Update comments and debug message.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

There are 2 formats:
ATI1N: 64 bits per 4x4 block, one-channel format
ATI2N: 128 bits per 4x4 block, two-channel format
Signed-off-by: NDave Airlie <airlied@redhat.com>

Because hardware cannot disable all colorbuffers directly to do depth-only
rendering, a user should:
- disable reading from a colorbuffer in blending
- disable fastfill
- set the color channel mask to 0 to prevent writing to a colorbuffer
Signed-off-by: NDave Airlie <airlied@redhat.com>

V2: detect IGP cards (which don't have own memory)
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Acked-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>