Vinayak Menon has reported that an excessive number of tasks was throttled
in the direct reclaim inside too_many_isolated() because NR_ISOLATED_FILE
was relatively high compared to NR_INACTIVE_FILE.  However it turned out
that the real number of NR_ISOLATED_FILE was 0 and the per-cpu
vm_stat_diff wasn't transferred into the global counter.

vmstat_work which is responsible for the sync is defined as deferrable
delayed work which means that the defined timeout doesn't wake up an idle
CPU.  A CPU might stay in an idle state for a long time and general effort
is to keep such a CPU in this state as long as possible which might lead
to all sorts of troubles for vmstat consumers as can be seen with the
excessive direct reclaim throttling.

This patch basically reverts 39bf6270 ("VM statistics: Make timer
deferrable") but it shouldn't cause any problems for idle CPUs because
only CPUs with an active per-cpu drift are woken up since 7cc36bbd
("vmstat: on-demand vmstat workers v8") and CPUs which are idle for a
longer time shouldn't have per-cpu drift.

Fixes: 39bf6270 (VM statistics: Make timer deferrable)
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Reported-by: NVinayak Menon <vinmenon@codeaurora.org>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CONFIG_COMPACTION=y, CONFIG_DEBUG_FS=n:

  mm/vmstat.c:690: warning: 'frag_start' defined but not used
  mm/vmstat.c:702: warning: 'frag_next' defined but not used
  mm/vmstat.c:710: warning: 'frag_stop' defined but not used
  mm/vmstat.c:715: warning: 'walk_zones_in_node' defined but not used

It's all a bit of a tangly mess and it's unclear why CONFIG_COMPACTION
figures in there at all.  Move frag_start/frag_next/frag_stop and
migratetype_names[] into the existing CONFIG_PROC_FS block.

walk_zones_in_node() gets a special ifdef.

Also move the #include lines up to where #include lines live.

[axel.lin@ingics.com: fix build error when !CONFIG_PROC_FS]
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Tested-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These flushes deal with sequence number overflows, such as for long lived
threads.  These are rare, but interesting from a debugging PoV.  As such,
display the number of flushes when vmacache debugging is enabled.
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is the page owner tracking code which is introduced so far ago.  It
is resident on Andrew's tree, though, nobody tried to upstream so it
remain as is.  Our company uses this feature actively to debug memory leak
or to find a memory hogger so I decide to upstream this feature.

This functionality help us to know who allocates the page.  When
allocating a page, we store some information about allocation in extra
memory.  Later, if we need to know status of all pages, we can get and
analyze it from this stored information.

In previous version of this feature, extra memory is statically defined in
struct page, but, in this version, extra memory is allocated outside of
struct page.  It enables us to turn on/off this feature at boottime
without considerable memory waste.

Although we already have tracepoint for tracing page allocation/free,
using it to analyze page owner is rather complex.  We need to enlarge the
trace buffer for preventing overlapping until userspace program launched.
And, launched program continually dump out the trace buffer for later
analysis and it would change system behaviour with more possibility rather
than just keeping it in memory, so bad for debug.

Moreover, we can use page_owner feature further for various purposes.  For
example, we can use it for fragmentation statistics implemented in this
patch.  And, I also plan to implement some CMA failure debugging feature
using this interface.

I'd like to give the credit for all developers contributed this feature,
but, it's not easy because I don't know exact history.  Sorry about that.
Below is people who has "Signed-off-by" in the patches in Andrew's tree.

Contributor:
Alexander Nyberg <alexn@dsv.su.se>
Mel Gorman <mgorman@suse.de>
Dave Hansen <dave@linux.vnet.ibm.com>
Minchan Kim <minchan@kernel.org>
Michal Nazarewicz <mina86@mina86.com>
Andrew Morton <akpm@linux-foundation.org>
Jungsoo Son <jungsoo.son@lge.com>
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

vmstat workers are used for folding counter differentials into the zone,
per node and global counters at certain time intervals.  They currently
run at defined intervals on all processors which will cause some holdoff
for processors that need minimal intrusion by the OS.

The current vmstat_update mechanism depends on a deferrable timer firing
every other second by default which registers a work queue item that runs
on the local CPU, with the result that we have 1 interrupt and one
additional schedulable task on each CPU every 2 seconds If a workload
indeed causes VM activity or multiple tasks are running on a CPU, then
there are probably bigger issues to deal with.

However, some workloads dedicate a CPU for a single CPU bound task.  This
is done in high performance computing, in high frequency financial
applications, in networking (Intel DPDK, EZchip NPS) and with the advent
of systems with more and more CPUs over time, this may become more and
more common to do since when one has enough CPUs one cares less about
efficiently sharing a CPU with other tasks and more about efficiently
monopolizing a CPU per task.

The difference of having this timer firing and workqueue kernel thread
scheduled per second can be enormous.  An artificial test measuring the
worst case time to do a simple "i++" in an endless loop on a bare metal
system and under Linux on an isolated CPU with dynticks and with and
without this patch, have Linux match the bare metal performance (~700
cycles) with this patch and loose by couple of orders of magnitude (~200k
cycles) without it[*].  The loss occurs for something that just calculates
statistics.  For networking applications, for example, this could be the
difference between dropping packets or sustaining line rate.

Statistics are important and useful, but it would be great if there would
be a way to not cause statistics gathering produce a huge performance
difference.  This patche does just that.

This patch creates a vmstat shepherd worker that monitors the per cpu
differentials on all processors.  If there are differentials on a
processor then a vmstat worker local to the processors with the
differentials is created.  That worker will then start folding the diffs
in regular intervals.  Should the worker find that there is no work to be
done then it will make the shepherd worker monitor the differentials
again.

With this patch it is possible then to have periods longer than
2 seconds without any OS event on a "cpu" (hardware thread).

The patch shows a very minor increased in system performance.

hackbench -s 512 -l 2000 -g 15 -f 25 -P

Results before the patch:

Running in process mode with 15 groups using 50 file descriptors each (== 750 tasks)
Each sender will pass 2000 messages of 512 bytes
Time: 4.992
Running in process mode with 15 groups using 50 file descriptors each (== 750 tasks)
Each sender will pass 2000 messages of 512 bytes
Time: 4.971
Running in process mode with 15 groups using 50 file descriptors each (== 750 tasks)
Each sender will pass 2000 messages of 512 bytes
Time: 5.063

Hackbench after the patch:

Running in process mode with 15 groups using 50 file descriptors each (== 750 tasks)
Each sender will pass 2000 messages of 512 bytes
Time: 4.973
Running in process mode with 15 groups using 50 file descriptors each (== 750 tasks)
Each sender will pass 2000 messages of 512 bytes
Time: 4.990
Running in process mode with 15 groups using 50 file descriptors each (== 750 tasks)
Each sender will pass 2000 messages of 512 bytes
Time: 4.993

[fengguang.wu@intel.com: cpu_stat_off can be static]
Signed-off-by: NChristoph Lameter <cl@linux.com>
Reviewed-by: NGilad Ben-Yossef <gilad@benyossef.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Max Krasnyansky <maxk@qti.qualcomm.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Always mark pages with PageBalloon even if balloon compaction is disabled
and expose this mark in /proc/kpageflags as KPF_BALLOON.

Also this patch adds three counters into /proc/vmstat: "balloon_inflate",
"balloon_deflate" and "balloon_migrate".  They accumulate balloon
activity.  Current size of balloon is (balloon_inflate - balloon_deflate)
pages.

All generic balloon code now gathered under option CONFIG_MEMORY_BALLOON.
It should be selected by ballooning driver which wants use this feature.
Currently virtio-balloon is the only user.
Signed-off-by: NKonstantin Khlebnikov <k.khlebnikov@samsung.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When kswapd is awake reclaiming, the per-cpu stat thresholds are lowered
to get more accurate counts to avoid breaching watermarks.  This
threshold update iterates over all possible CPUs which is unnecessary.
Only online CPUs need to be updated.  If a new CPU is onlined,
refresh_zone_stat_thresholds() will set the thresholds correctly.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

zone->pages_scanned is a write-intensive cache line during page reclaim
and it's also updated during page free.  Move the counter into vmstat to
take advantage of the per-cpu updates and do not update it in the free
paths unless necessary.

On a small UMA machine running tiobench the difference is marginal.  On
a 4-node machine the overhead is more noticable.  Note that automatic
NUMA balancing was disabled for this test as otherwise the system CPU
overhead is unpredictable.

          3.16.0-rc3  3.16.0-rc3  3.16.0-rc3
             vanillarearrange-v5   vmstat-v5
User          746.94      759.78      774.56
System      65336.22    58350.98    32847.27
Elapsed     27553.52    27282.02    27415.04

Note that the overhead reduction will vary depending on where exactly
pages are allocated and freed.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The arrangement of struct zone has changed over time and now it has
reached the point where there is some inappropriate sharing going on.
On x86-64 for example

o The zone->node field is shared with the zone lock and zone->node is
  accessed frequently from the page allocator due to the fair zone
  allocation policy.

o span_seqlock is almost never used by shares a line with free_area

o Some zone statistics share a cache line with the LRU lock so
  reclaim-intensive and allocator-intensive workloads can bounce the cache
  line on a stat update

This patch rearranges struct zone to put read-only and read-mostly
fields together and then splits the page allocator intensive fields, the
zone statistics and the page reclaim intensive fields into their own
cache lines.  Note that the type of lowmem_reserve changes due to the
watermark calculations being signed and avoiding a signed/unsigned
conversion there.

On the test configuration I used the overall size of struct zone shrunk
by one cache line.  On smaller machines, this is not likely to be
noticable.  However, on a 4-node NUMA machine running tiobench the
system CPU overhead is reduced by this patch.

          3.16.0-rc3  3.16.0-rc3
             vanillarearrange-v5r9
User          746.94      759.78
System      65336.22    58350.98
Elapsed     27553.52    27282.02
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mlocked_vma_newpage() is called with pte lock held(a spinlock), which
implies preemtion disabled, and the vm stat counter is not modified from
interrupt context, so we need not use an irq-safe mod_zone_page_state()
here, using a light-weight version __mod_zone_page_state() would be OK.

This patch also documents __mod_zone_page_state() and some of its
callsites.  The comment above __mod_zone_page_state() is from Hugh
Dickins, and acked by Christoph.

Most credits to Hugh and Christoph for the clarification on the usage of
the __mod_zone_page_state().

[akpm@linux-foundation.org: coding-style fixes]
Suggested-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NJianyu Zhan <nasa4836@gmail.com>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace places where __get_cpu_var() is used for an address calculation
with this_cpu_ptr().
Signed-off-by: NChristoph Lameter <cl@linux.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce a CONFIG_DEBUG_VM_VMACACHE option to enable counting the cache
hit rate -- exported in /proc/vmstat.

Any updates to the caching scheme needs this kind of data, thus it can
save some work re-implementing the counting all the time.
Signed-off-by: NDavidlohr Bueso <davidlohr@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is plenty of anecdotal evidence and a load of blog posts
suggesting that using "drop_caches" periodically keeps your system
running in "tip top shape".  Perhaps adding some kernel documentation
will increase the amount of accurate data on its use.

If we are not shrinking caches effectively, then we have real bugs.
Using drop_caches will simply mask the bugs and make them harder to
find, but certainly does not fix them, nor is it an appropriate
"workaround" to limit the size of the caches.  On the contrary, there
have been bug reports on issues that turned out to be misguided use of
cache dropping.

Dropping caches is a very drastic and disruptive operation that is good
for debugging and running tests, but if it creates bug reports from
production use, kernel developers should be aware of its use.

Add a bit more documentation about it, a syslog message to track down
abusers, and vmstat drop counters to help analyze problem reports.

[akpm@linux-foundation.org: checkpatch fixes]
[hannes@cmpxchg.org: add runtime suppression control]
Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Previously, page cache radix tree nodes were freed after reclaim emptied
out their page pointers.  But now reclaim stores shadow entries in their
place, which are only reclaimed when the inodes themselves are
reclaimed.  This is problematic for bigger files that are still in use
after they have a significant amount of their cache reclaimed, without
any of those pages actually refaulting.  The shadow entries will just
sit there and waste memory.  In the worst case, the shadow entries will
accumulate until the machine runs out of memory.

To get this under control, the VM will track radix tree nodes
exclusively containing shadow entries on a per-NUMA node list.  Per-NUMA
rather than global because we expect the radix tree nodes themselves to
be allocated node-locally and we want to reduce cross-node references of
otherwise independent cache workloads.  A simple shrinker will then
reclaim these nodes on memory pressure.

A few things need to be stored in the radix tree node to implement the
shadow node LRU and allow tree deletions coming from the list:

1. There is no index available that would describe the reverse path
   from the node up to the tree root, which is needed to perform a
   deletion.  To solve this, encode in each node its offset inside the
   parent.  This can be stored in the unused upper bits of the same
   member that stores the node's height at no extra space cost.

2. The number of shadow entries needs to be counted in addition to the
   regular entries, to quickly detect when the node is ready to go to
   the shadow node LRU list.  The current entry count is an unsigned
   int but the maximum number of entries is 64, so a shadow counter
   can easily be stored in the unused upper bits.

3. Tree modification needs tree lock and tree root, which are located
   in the address space, so store an address_space backpointer in the
   node.  The parent pointer of the node is in a union with the 2-word
   rcu_head, so the backpointer comes at no extra cost as well.

4. The node needs to be linked to an LRU list, which requires a list
   head inside the node.  This does increase the size of the node, but
   it does not change the number of objects that fit into a slab page.

[akpm@linux-foundation.org: export the right function]
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NMinchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The VM maintains cached filesystem pages on two types of lists.  One
list holds the pages recently faulted into the cache, the other list
holds pages that have been referenced repeatedly on that first list.
The idea is to prefer reclaiming young pages over those that have shown
to benefit from caching in the past.  We call the recently usedbut
ultimately was not significantly better than a FIFO policy and still
thrashed cache based on eviction speed, rather than actual demand for
cache.

This patch solves one half of the problem by decoupling the ability to
detect working set changes from the inactive list size.  By maintaining
a history of recently evicted file pages it can detect frequently used
pages with an arbitrarily small inactive list size, and subsequently
apply pressure on the active list based on actual demand for cache, not
just overall eviction speed.

Every zone maintains a counter that tracks inactive list aging speed.
When a page is evicted, a snapshot of this counter is stored in the
now-empty page cache radix tree slot.  On refault, the minimum access
distance of the page can be assessed, to evaluate whether the page
should be part of the active list or not.

This fixes the VM's blindness towards working set changes in excess of
the inactive list.  And it's the foundation to further improve the
protection ability and reduce the minimum inactive list size of 50%.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NMinchan Kim <minchan@kernel.org>
Reviewed-by: NBob Liu <bob.liu@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Subsystems that want to register CPU hotplug callbacks, as well as perform
initialization for the CPUs that are already online, often do it as shown
below:

	get_online_cpus();

	for_each_online_cpu(cpu)
		init_cpu(cpu);

	register_cpu_notifier(&foobar_cpu_notifier);

	put_online_cpus();

This is wrong, since it is prone to ABBA deadlocks involving the
cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently
with CPU hotplug operations).

Instead, the correct and race-free way of performing the callback
registration is:

	cpu_notifier_register_begin();

	for_each_online_cpu(cpu)
		init_cpu(cpu);

	/* Note the use of the double underscored version of the API */
	__register_cpu_notifier(&foobar_cpu_notifier);

	cpu_notifier_register_done();

Fix the vmstat code in the MM subsystem by using this latter form of callback
registration.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: NChristoph Lameter <cl@linux.com>
Acked-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Bisection between 3.11 and 3.12 fingered commit 9824cf97 ("mm:
vmstats: tlb flush counters") to cause overhead problems.

The counters are undeniably useful but how often do we really
need to debug TLB flush related issues?  It does not justify
taking the penalty everywhere so make it a debugging option.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Tested-by: NDavidlohr Bueso <davidlohr@hp.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-XzxjntugxuwpxXhcrxqqh53b@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Commit 0255d491 ("mm: Account for a THP NUMA hinting update as one
PTE update") was added to account for the number of PTE updates when
marking pages prot_numa.  task_numa_work was using the old return value
to track how much address space had been updated.  Altering the return
value causes the scanner to do more work than it is configured or
documented to in a single unit of work.

This patch reverts that commit and accounts for the number of THP
updates separately in vmstat.  It is up to the administrator to
interpret the pair of values correctly.  This is a straight-forward
operation and likely to only be of interest when actively debugging NUMA
balancing problems.

The impact of this patch is that the NUMA PTE scanner will scan slower
when THP is enabled and workloads may converge slower as a result.  On
the flip size system CPU usage should be lower than recent tests
reported.  This is an illustrative example of a short single JVM specjbb
test

specjbb
                       3.12.0                3.12.0
                      vanilla      acctupdates
TPut 1      26143.00 (  0.00%)     25747.00 ( -1.51%)
TPut 7     185257.00 (  0.00%)    183202.00 ( -1.11%)
TPut 13    329760.00 (  0.00%)    346577.00 (  5.10%)
TPut 19    442502.00 (  0.00%)    460146.00 (  3.99%)
TPut 25    540634.00 (  0.00%)    549053.00 (  1.56%)
TPut 31    512098.00 (  0.00%)    519611.00 (  1.47%)
TPut 37    461276.00 (  0.00%)    474973.00 (  2.97%)
TPut 43    403089.00 (  0.00%)    414172.00 (  2.75%)

              3.12.0      3.12.0
             vanillaacctupdates
User         5169.64     5184.14
System        100.45       80.02
Elapsed       252.75      251.85

Performance is similar but note the reduction in system CPU time.  While
this showed a performance gain, it will not be universal but at least
it'll be behaving as documented.  The vmstats are obviously different but
here is an obvious interpretation of them from mmtests.

                                3.12.0      3.12.0
                               vanillaacctupdates
NUMA page range updates        1408326    11043064
NUMA huge PMD updates                0       21040
NUMA PTE updates               1408326      291624

"NUMA page range updates" == nr_pte_updates and is the value returned to
the NUMA pte scanner.  NUMA huge PMD updates were the number of THP
updates which in combination can be used to calculate how many ptes were
updated from userspace.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reported-by: NAlex Thorlton <athorlton@sgi.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

vmstat_cpuup_callback() is a CPU notifier callback, which marks N_CPU to a
node at CPU online event.  However, it does not update this N_CPU info at
CPU offline event.

Changed vmstat_cpuup_callback() to clear N_CPU when the last CPU in the
node is put into offline, i.e.  the node no longer has any online CPU.
Signed-off-by: NToshi Kani <toshi.kani@hp.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Reviewed-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Tested-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After a system booted, N_CPU is not set to any node as has_cpu shows an
empty line.

  # cat /sys/devices/system/node/has_cpu
  (show-empty-line)

setup_vmstat() registers its CPU notifier callback,
vmstat_cpuup_callback(), which marks N_CPU to a node when a CPU is put
into online.  However, setup_vmstat() is called after all CPUs are
launched in the boot sequence.

Changed setup_vmstat() to mark N_CPU to the nodes with online CPUs at
boot, which is consistent with other operations in
vmstat_cpuup_callback(), i.e.  start_cpu_timer() and
refresh_zone_stat_thresholds().

Also added get_online_cpus() to protect the for_each_online_cpu() loop.
Signed-off-by: NToshi Kani <toshi.kani@hp.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Reviewed-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Tested-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch is based on KOSAKI's work and I add a little more description,
please refer https://lkml.org/lkml/2012/6/14/74.

Currently, I found system can enter a state that there are lots of free
pages in a zone but only order-0 and order-1 pages which means the zone is
heavily fragmented, then high order allocation could make direct reclaim
path's long stall(ex, 60 seconds) especially in no swap and no compaciton
enviroment.  This problem happened on v3.4, but it seems issue still lives
in current tree, the reason is do_try_to_free_pages enter live lock:

kswapd will go to sleep if the zones have been fully scanned and are still
not balanced.  As kswapd thinks there's little point trying all over again
to avoid infinite loop.  Instead it changes order from high-order to
0-order because kswapd think order-0 is the most important.  Look at
73ce02e9 in detail.  If watermarks are ok, kswapd will go back to sleep
and may leave zone->all_unreclaimable =3D 0.  It assume high-order users
can still perform direct reclaim if they wish.

Direct reclaim continue to reclaim for a high order which is not a
COSTLY_ORDER without oom-killer until kswapd turn on
zone->all_unreclaimble= .  This is because to avoid too early oom-kill.
So it means direct_reclaim depends on kswapd to break this loop.

In worst case, direct-reclaim may continue to page reclaim forever when
kswapd sleeps forever until someone like watchdog detect and finally kill
the process.  As described in:
http://thread.gmane.org/gmane.linux.kernel.mm/103737

We can't turn on zone->all_unreclaimable from direct reclaim path because
direct reclaim path don't take any lock and this way is racy.  Thus this
patch removes zone->all_unreclaimable field completely and recalculates
zone reclaimable state every time.

Note: we can't take the idea that direct-reclaim see zone->pages_scanned
directly and kswapd continue to use zone->all_unreclaimable.  Because, it
is racy.  commit 929bea7c (vmscan: all_unreclaimable() use
zone->all_unreclaimable as a name) describes the detail.

[akpm@linux-foundation.org: uninline zone_reclaimable_pages() and zone_reclaimable()]
Cc: Aaditya Kumar <aaditya.kumar.30@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Bob Liu <lliubbo@gmail.com>
Cc: Neil Zhang <zhangwm@marvell.com>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NLisa Du <cldu@marvell.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Disabling interrupts repeatedly can be avoided in the inner loop if we use
a this_cpu operation.
Signed-off-by: NChristoph Lameter <cl@linux.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
CC: Tejun Heo <tj@kernel.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Both functions that update global counters use the same mechanism.

Create a function that contains the common code.
Signed-off-by: NChristoph Lameter <cl@linux.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
CC: Tejun Heo <tj@kernel.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The main idea behind this patchset is to reduce the vmstat update overhead
by avoiding interrupt enable/disable and the use of per cpu atomics.

This patch (of 3):

It is better to have a separate folding function because
refresh_cpu_vm_stats() also does other things like expire pages in the
page allocator caches.

If we have a separate function then refresh_cpu_vm_stats() is only called
from the local cpu which allows additional optimizations.

The folding function is only called when a cpu is being downed and
therefore no other processor will be accessing the counters.  Also
simplifies synchronization.

[akpm@linux-foundation.org: fix UP build]
Signed-off-by: NChristoph Lameter <cl@linux.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
CC: Tejun Heo <tj@kernel.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Each zone that holds userspace pages of one workload must be aged at a
speed proportional to the zone size.  Otherwise, the time an individual
page gets to stay in memory depends on the zone it happened to be
allocated in.  Asymmetry in the zone aging creates rather unpredictable
aging behavior and results in the wrong pages being reclaimed, activated
etc.

But exactly this happens right now because of the way the page allocator
and kswapd interact.  The page allocator uses per-node lists of all zones
in the system, ordered by preference, when allocating a new page.  When
the first iteration does not yield any results, kswapd is woken up and the
allocator retries.  Due to the way kswapd reclaims zones below the high
watermark while a zone can be allocated from when it is above the low
watermark, the allocator may keep kswapd running while kswapd reclaim
ensures that the page allocator can keep allocating from the first zone in
the zonelist for extended periods of time.  Meanwhile the other zones
rarely see new allocations and thus get aged much slower in comparison.

The result is that the occasional page placed in lower zones gets
relatively more time in memory, even gets promoted to the active list
after its peers have long been evicted.  Meanwhile, the bulk of the
working set may be thrashing on the preferred zone even though there may
be significant amounts of memory available in the lower zones.

Even the most basic test -- repeatedly reading a file slightly bigger than
memory -- shows how broken the zone aging is.  In this scenario, no single
page should be able stay in memory long enough to get referenced twice and
activated, but activation happens in spades:

  $ grep active_file /proc/zoneinfo
      nr_inactive_file 0
      nr_active_file 0
      nr_inactive_file 0
      nr_active_file 8
      nr_inactive_file 1582
      nr_active_file 11994
  $ cat data data data data >/dev/null
  $ grep active_file /proc/zoneinfo
      nr_inactive_file 0
      nr_active_file 70
      nr_inactive_file 258753
      nr_active_file 443214
      nr_inactive_file 149793
      nr_active_file 12021

Fix this with a very simple round robin allocator.  Each zone is allowed a
batch of allocations that is proportional to the zone's size, after which
it is treated as full.  The batch counters are reset when all zones have
been tried and the allocator enters the slowpath and kicks off kswapd
reclaim.  Allocation and reclaim is now fairly spread out to all
available/allowable zones:

  $ grep active_file /proc/zoneinfo
      nr_inactive_file 0
      nr_active_file 0
      nr_inactive_file 174
      nr_active_file 4865
      nr_inactive_file 53
      nr_active_file 860
  $ cat data data data data >/dev/null
  $ grep active_file /proc/zoneinfo
      nr_inactive_file 0
      nr_active_file 0
      nr_inactive_file 666622
      nr_active_file 4988
      nr_inactive_file 190969
      nr_active_file 937

When zone_reclaim_mode is enabled, allocations will now spread out to all
zones on the local node, not just the first preferred zone (which on a 4G
node might be a tiny Normal zone).
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Paul Bolle <paul.bollee@gmail.com>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Tested-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The previous patch doing vmstats for TLB flushes ("mm: vmstats: tlb flush
counters") effectively missed UP since arch/x86/mm/tlb.c is only compiled
for SMP.

UP systems do not do remote TLB flushes, so compile those counters out on
UP.

arch/x86/kernel/cpu/mtrr/generic.c calls __flush_tlb() directly.  This is
probably an optimization since both the mtrr code and __flush_tlb() write
cr4.  It would probably be safe to make that a flush_tlb_all() (and then
get these statistics), but the mtrr code is ancient and I'm hesitant to
touch it other than to just stick in the counters.

[akpm@linux-foundation.org: tweak comments]
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I was investigating some TLB flush scaling issues and realized that we do
not have any good methods for figuring out how many TLB flushes we are
doing.

It would be nice to be able to do these in generic code, but the
arch-independent calls don't explicitly specify whether we actually need
to do remote flushes or not.  In the end, we really need to know if we
actually _did_ global vs.  local invalidations, so that leaves us with few
options other than to muck with the counters from arch-specific code.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

This removes all the uses of the __cpuinit macros from C files in
the core kernel directories (kernel, init, lib, mm, and include)
that don't really have a specific maintainer.

[1] https://lkml.org/lkml/2013/5/20/589Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CONFIG_HOTPLUG is going away as an option, cleanup CONFIG_HOTPLUG
ifdefs in mm files.
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add 2 helpers (zone_end_pfn() and zone_spans_pfn()) to reduce code
duplication.

This also switches to using them in compaction (where an additional
variable needed to be renamed), page_alloc, vmstat, memory_hotplug, and
kmemleak.

Note that in compaction.c I avoid calling zone_end_pfn() repeatedly
because I expect at some point the sycronization issues with start_pfn &
spanned_pages will need fixing, either by actually using the seqlock or
clever memory barrier usage.
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

From: Zlatko Calusic <zlatko.calusic@iskon.hr>

Commit 92df3a72 ("mm: vmscan: throttle reclaim if encountering too
many dirty pages under writeback") introduced waiting on congested zones
based on a sane algorithm in shrink_inactive_list().

What this means is that there's no more need for throttling and
additional heuristics in balance_pgdat().  So, let's remove it and tidy
up the code.
Signed-off-by: NZlatko Calusic <zlatko.calusic@iskon.hr>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Several functions test MIGRATE_ISOLATE and some of those are hotpath but
MIGRATE_ISOLATE is used only if we enable CONFIG_MEMORY_ISOLATION(ie,
CMA, memory-hotplug and memory-failure) which are not common config
option.  So let's not add unnecessary overhead and code when we don't
enable CONFIG_MEMORY_ISOLATION.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NMichal Nazarewicz <mina86@mina86.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now we have zone->managed_pages for "pages managed by the buddy system
in the zone", so replace zone->present_pages with zone->managed_pages if
what the user really wants is number of allocatable pages.
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Cc: Chris Clayton <chris2553@googlemail.com>
Cc: "Rafael J . Wysocki" <rjw@sisk.pl>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan@kernel.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently a zone's present_pages is calcuated as below, which is
inaccurate and may cause trouble to memory hotplug.

	spanned_pages - absent_pages - memmap_pages - dma_reserve.

During fixing bugs caused by inaccurate zone->present_pages, we found
zone->present_pages has been abused.  The field zone->present_pages may
have different meanings in different contexts:

1) pages existing in a zone.
2) pages managed by the buddy system.

For more discussions about the issue, please refer to:
  http://lkml.org/lkml/2012/11/5/866
  https://patchwork.kernel.org/patch/1346751/

This patchset tries to introduce a new field named "managed_pages" to
struct zone, which counts "pages managed by the buddy system".  And revert
zone->present_pages to count "physical pages existing in a zone", which
also keep in consistence with pgdat->node_present_pages.

We will set an initial value for zone->managed_pages in function
free_area_init_core() and will adjust it later if the initial value is
inaccurate.

For DMA/normal zones, the initial value is set to:

	(spanned_pages - absent_pages - memmap_pages - dma_reserve)

Later zone->managed_pages will be adjusted to the accurate value when the
bootmem allocator frees all free pages to the buddy system in function
free_all_bootmem_node() and free_all_bootmem().

The bootmem allocator doesn't touch highmem pages, so highmem zones'
managed_pages is set to the accurate value "spanned_pages - absent_pages"
in function free_area_init_core() and won't be updated anymore.

This patch also adds a new field "managed_pages" to /proc/zoneinfo
and sysrq showmem.

[akpm@linux-foundation.org: small comment tweaks]
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Tested-by: NChris Clayton <chris2553@googlemail.com>
Cc: "Rafael J . Wysocki" <rjw@sisk.pl>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan@kernel.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.

The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

hzp_alloc is incremented every time a huge zero page is successfully
	allocated. It includes allocations which where dropped due
	race with other allocation. Note, it doesn't count every map
	of the huge zero page, only its allocation.

hzp_alloc_failed is incremented if kernel fails to allocate huge zero
	page and falls back to using small pages.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is tricky to quantify the basic cost of automatic NUMA placement in a
meaningful manner. This patch adds some vmstats that can be used as part
of a basic costing model.

u    = basic unit = sizeof(void *)
Ca   = cost of struct page access = sizeof(struct page) / u
Cpte = Cost PTE access = Ca
Cupdate = Cost PTE update = (2 * Cpte) + (2 * Wlock)
	where Cpte is incurred twice for a read and a write and Wlock
	is a constant representing the cost of taking or releasing a
	lock
Cnumahint = Cost of a minor page fault = some high constant e.g. 1000
Cpagerw = Cost to read or write a full page = Ca + PAGE_SIZE/u
Ci = Cost of page isolation = Ca + Wi
	where Wi is a constant that should reflect the approximate cost
	of the locking operation
Cpagecopy = Cpagerw + (Cpagerw * Wnuma) + Ci + (Ci * Wnuma)
	where Wnuma is the approximate NUMA factor. 1 is local. 1.2
	would imply that remote accesses are 20% more expensive

Balancing cost = Cpte * numa_pte_updates +
		Cnumahint * numa_hint_faults +
		Ci * numa_pages_migrated +
		Cpagecopy * numa_pages_migrated

Note that numa_pages_migrated is used as a measure of how many pages
were isolated even though it would miss pages that failed to migrate. A
vmstat counter could have been added for it but the isolation cost is
pretty marginal in comparison to the overall cost so it seemed overkill.

The ideal way to measure automatic placement benefit would be to count
the number of remote accesses versus local accesses and do something like

	benefit = (remote_accesses_before - remove_access_after) * Wnuma

but the information is not readily available. As a workload converges, the
expection would be that the number of remote numa hints would reduce to 0.

	convergence = numa_hint_faults_local / numa_hint_faults
		where this is measured for the last N number of
		numa hints recorded. When the workload is fully
		converged the value is 1.

This can measure if the placement policy is converging and how fast it is
doing it.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>

Compaction already has tracepoints to count scanned and isolated pages
but it requires that ftrace be enabled and if that information has to be
written to disk then it can be disruptive. This patch adds vmstat counters
for compaction called compact_migrate_scanned, compact_free_scanned and
compact_isolated.

With these counters, it is possible to define a basic cost model for
compaction. This approximates of how much work compaction is doing and can
be compared that with an oprofile showing TLB misses and see if the cost of
compaction is being offset by THP for example. Minimally a compaction patch
can be evaluated in terms of whether it increases or decreases cost. The
basic cost model looks like this

Fundamental unit u:	a word	sizeof(void *)

Ca  = cost of struct page access = sizeof(struct page) / u

Cmc = Cost migrate page copy = (Ca + PAGE_SIZE/u) * 2
Cmf = Cost migrate failure   = Ca * 2
Ci  = Cost page isolation    = (Ca + Wi)
	where Wi is a constant that should reflect the approximate
	cost of the locking operation.

Csm = Cost migrate scanning = Ca
Csf = Cost free    scanning = Ca

Overall cost =	(Csm * compact_migrate_scanned) +
	      	(Csf * compact_free_scanned)    +
	      	(Ci  * compact_isolated)	+
		(Cmc * pgmigrate_success)	+
		(Cmf * pgmigrate_failed)

Where the values are read from /proc/vmstat.

This is very basic and ignores certain costs such as the allocation cost
to do a migrate page copy but any improvement to the model would still
use the same vmstat counters.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NRik van Riel <riel@redhat.com>

The compact_pages_moved and compact_pagemigrate_failed events are
convenient for determining if compaction is active and to what
degree migration is succeeding but it's at the wrong level. Other
users of migration may also want to know if migration is working
properly and this will be particularly true for any automated
NUMA migration. This patch moves the counters down to migration
with the new events called pgmigrate_success and pgmigrate_fail.
The compact_blocks_moved counter is removed because while it was
useful for debugging initially, it's worthless now as no meaningful
conclusions can be drawn from its value.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NRik van Riel <riel@redhat.com>