The last use of hv_get_ringbuffer_availbytes in drivers is now
gone. Only used by the debug info routine so make it static. Also, add
READ_ONCE() to avoid any possible issues with potentially volatile
index values.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When iterating over incoming ring elements from the host, prefetch
the next descriptor so that it is cache hot.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Don't signal host if it has disabled interrupts for that
ring buffer. Check the feature bit to see if host supports
pending send size flag.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Don't need cached read index anymore now that packet iterator
is used. The iterator has the original read index until the
visible read_index is updated.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The function hv_signal_on_read was defined in hyperv.h and
only used in one place in ring_buffer code. Clearer to just
move it inline there.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

With new iterator functions (and the double mapping) the ring buffer
read function can be greatly simplified.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow driver to get debug information about state of the ring.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

hv_ringbuffer_read cleanup.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Don't initialize variables that are then set a few lines later.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

No need for empty return at end of void function
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is mostly just a refactoring of previous functions
(get_pkt_next_raw, put_pkt_raw and commit_rd_index) to make it easier
to use for other drivers and NAPI.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Takes less clock cycles to check for ring wrap and subtract than to
do a modulus instruction.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Functions that just query state of ring buffer can have parameters
marked const.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In order to implement NAPI in netvsc, the driver needs access to
control host interrupt mask.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

All current usage of vmbus write uses the acquire_lock flag, therefore
having it be optional is unnecessary. This also fixes a sparse warning
since sparse doesn't like when a function has conditional locking.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The flag to cause notification of host is unused after
commit a01a291a282f7c2e ("Drivers: hv: vmbus: Base host signaling
strictly on the ring state"). Therefore remove it from the ring
buffer internal API.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit a389fcfd ("Drivers: hv: vmbus: Fix signaling logic in
hv_need_to_signal_on_read()")
added the proper mb(), but removed the test "prev_write_sz < pending_sz"
when making the signal decision.

As a result, the guest can signal the host unnecessarily,
and then the host can throttle the guest because the host
thinks the guest is buggy or malicious; finally the user
running stress test can perceive intermittent freeze of
the guest.

This patch brings back the test, and properly handles the
in-place consumption APIs used by NetVSC (see get_next_pkt_raw(),
put_pkt_raw() and commit_rd_index()).

Fixes: a389fcfd ("Drivers: hv: vmbus: Fix signaling logic in
hv_need_to_signal_on_read()")
Signed-off-by: NDexuan Cui <decui@microsoft.com>
Reported-by: NRolf Neugebauer <rolf.neugebauer@docker.com>
Tested-by: NRolf Neugebauer <rolf.neugebauer@docker.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

After the channel is rescinded, the host does not read from the rescinded channel.
Fail writes to a channel that has already been rescinded. If we permit writes on a
rescinded channel, since the host will not respond we will have situations where
we will be unable to unload vmbus drivers that cannot have any outstanding requests
to the host at the point they are unoaded.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signal the host when we determine the host is to be signaled -
on th read path. The currrent code determines the need to signal in the
ringbuffer code and actually issues the signal elsewhere. This can result
in the host viewing this interrupt as spurious since the host may also
poll the channel. Make the necessary adjustments.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signal the host when we determine the host is to be signaled.
The currrent code determines the need to signal in the ringbuffer
code and actually issues the signal elsewhere. This can result
in the host viewing this interrupt as spurious since the host may also
poll the channel. Make the necessary adjustments.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

One of the factors that can result in the host concluding that a given
guest in mounting a DOS attack is if the guest generates interrupts
to the host when the host is not expecting it. If these "spurious"
interrupts reach a certain rate, the host can throttle the guest to
minimize the impact. The host computation of the "expected number
of interrupts" is strictly based on the ring transitions. Until
the host logic is fixed, base the guest logic to interrupt solely
on the ring state.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

With wrap around mappings for ring buffers we can always use a single
memcpy() to do the job.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Tested-by: NDexuan Cui <decui@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Make it possible to always use a single memcpy() or to provide a direct
link to a packet on the ring buffer by creating virtual mapping for two
copies of the ring buffer with vmap(). Utilize currently empty
hv_ringbuffer_cleanup() to do the unmap.

While on it, replace sizeof(struct hv_ring_buffer) check
in hv_ringbuffer_init() with BUILD_BUG_ON() as it is a compile time check.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: NDexuan Cui <decui@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

For synthetic NIC channels, enable explicit signaling policy as netvsc wants to
explicitly control when the host is to be signaled.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

On the consumer side, we have interrupt driven flow management of the
producer. It is sufficient to base the signaling decision on the
amount of space that is available to write after the read is complete.
The current code samples the previous available space and uses this
in making the signaling decision. This state can be stale and is
unnecessary. Since the state can be stale, we end up not signaling
the host (when we should) and this can result in a hang. Fix this
problem by removing the unnecessary check. I would like to thank
Arseney Romanenko <arseneyr@microsoft.com> for pointing out this issue.

Also, issue a full memory barrier before making the signaling descision
to correctly deal with potential reordering of the write (read index)
followed by the read of pending_sz.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Tested-by: NDexuan Cui <decui@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Implement APIs for in-place consumption of vmbus packets. Currently, each
packet is copied and processed one at a time and as part of processing
each packet we potentially may signal the host (if it is waiting for
room to produce a packet).

These APIs help batched in-place processing of vmbus packets.
We also optimize host signaling by having a separate API to signal
the end of in-place consumption. With netvsc using these APIs,
on an iperf run on average I see about 20X reduction in checks to
signal the host.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation for implementing APIs for in-place consumption of VMBUS
packets, movve some ring buffer functionality into hyperv.h
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the virt_xx barriers that have been defined for use in virtual machines.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the READ_ONCE macro to access variabes that can change asynchronously.
This is the recommended mechanism for dealing with "unsafe" compiler
optimizations.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce separate functions for estimating how much can be read from
and written to the ring buffer.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

On the consumer side, we have interrupt driven flow management of the
producer. It is sufficient to base the signaling decision on the
amount of space that is available to write after the read is complete.
The current code samples the previous available space and uses this
in making the signaling decision. This state can be stale and is
unnecessary. Since the state can be stale, we end up not signaling
the host (when we should) and this can result in a hang. Fix this
problem by removing the unnecessary check. I would like to thank
Arseney Romanenko <arseneyr@microsoft.com> for pointing out this issue.

Also, issue a full memory barrier before making the signaling descision
to correctly deal with potential reordering of the write (read index)
followed by the read of pending_sz.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Tested-by: NDexuan Cui <decui@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

On the channel send side, many of the VMBUS
device drivers explicity serialize access to the
outgoing ring buffer. Give more control to the
VMBUS device drivers in terms how to serialize
accesss to the outgoing ring buffer.
The default behavior will be to aquire the
ring lock to preserve the current behavior.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The function hv_ringbuffer_read() is called always on a pre-assigned
CPU. Each chnnel is bound to a specific CPU and this function is
always called on the CPU the channel is bound. There is no need to
acquire the spin lock; get rid of this overhead.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently, there is only one user for hv_ringbuffer_read()/
hv_ringbuffer_peak() functions and the usage of these functions is:
- insecure as we drop ring_lock between them, someone else (in theory
  only) can acquire it in between;
- non-optimal as we do a number of things (acquire/release the above
  mentioned lock, calculate available space on the ring, ...) twice and
  this path is performance-critical.

Remove hv_ringbuffer_peek() moving the logic from __vmbus_recvpacket() to
hv_ringbuffer_read().
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

hv_ringbuffer_peek() does the same as hv_ringbuffer_read() without
advancing the read index. The only functional change this patch brings
is moving hv_need_to_signal_on_read() call under the ring_lock but this
function is just a couple of comparisons.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert 6+-string comments repeating function names to normal kernel-style
comments and fix a couple of other comment style issues. No textual or
functional changes intended.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes a bug where previously hv_ringbuffer_read would pass in the old
number of bytes available to read instead of the expected old read index
when calculating when to signal to the host that the ringbuffer is empty.
Since the previous write size is already saved, also changes the
hv_need_to_signal_on_read to use the previously read value rather than
recalculating it.
Signed-off-by: NChristopher Oo <t-chriso@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In win8 we have a feature that allows for interrupt driven flow management
for host/guest communication. For instance, if the host were blocked because
there was no space available in the ringbuffer, the host could request that the
guest send an interrupt when space becomes available in the ringbuffer (when
the guest drains the ringbuffer).

While this feature was implemented in the guest a while ago, we had not
advertised that the guest supported this feature. This patch advertises
the support to the host.

For pre-win8 hosts, this has no effect since the size of the ringbuffer
control structure has not changed and all changes have been backward
compatible - unused/reserved space has been used to implement this
feature.

In this version of the patch I have cleaned up the commit log based on
feedback from Greg KH.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The current channel code is using scatterlist abstraction to pass data to the
ringbuffer API on the send path. This causes unnecessary translations
between virtual and physical addresses. Fix this.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patches add a read barriers to force the driver to check the interrupt mask
before read_index. Otherwise we may lost a kick to host.

Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>